Linux ATA RAID Storage
[Prev Page][Next Page]
- Re: Recommended ATA-RAID controller ?
- From: Karl Huysmans <karl.huysmans@xxxxxxxxx>
- Recommended ATA-RAID controller ?
- From: lloyd <subscr002@xxxxxxxxxxxxxxxxxxxx>
- Re: Mixing ataraid and software raid
- From: "Dave Stubbs" <dave.stubbs@xxxxxxxxxxx>
- Promise 20276 driver for Red Hat 8.0 required
- From: "Marcel von Ranson" <Marcel@xxxxxxxxxxxxx>
- Re: Mixing ataraid and software raid
- From: Johann Uhrmann <johann.uhrmann@xxxxxxxxxx>
- Re: Mixing ataraid and software raid
- From: Marcin <migor@xxxxx>
- Re: info on the Promise FastTrack 100 TX2
- From: Samuel Flory <sflory@xxxxxxxxxxxx>
- AW: info on the Promise FastTrack 100 TX2
- From: "Rüdiger G. Biernat" <info@xxxxxxxxxxx>
- Re: info on the Promise FastTrack 100 TX2
- From: "Francesco Peeters" <Francesco@xxxxxxxxxxxxxx>
- Re: info on the Promise FastTrack 100 TX2
- From: Michael George <george@xxxxxxxxxxxxxx>
- Re: Mixing ataraid and software raid
- From: Michael George <george@xxxxxxxxxxxxxx>
- Re: info on the Promise FastTrack 100 TX2
- From: Samuel Flory <sflory@xxxxxxxxxxxx>
- Re: info on the Promise FastTrack 100 TX2
- From: <edwardam@xxxxxxxxxxxx>
- Re: info on the Promise FastTrack 100 TX2
- From: Michael George <george@xxxxxxxxxxxxxx>
- Mixing ataraid and software raid
- From: Marcin <migor@xxxxx>
- RE: info on the Promise FastTrack 100 TX2
- From: "Aldert E. van der Laan" <aldert@xxxxxxxxxxxxx>
- info on the Promise FastTrack 100 TX2
- From: Michael George <george@xxxxxxxxxxxxxx>
- RE: read_intr / DriveStatusError errors with Promise FT 100
- From: Murty Rompalli <murty@xxxxxxxxxxxxxxx>
- Does anyone knows ataraid support 4 Anaconda
- From: Murty Rompalli <murty@xxxxxxxxxxxxxxx>
- It works! (was: Re: Adaptec AAR-1200A)
- From: "Francesco Peeters" <Francesco@xxxxxxxxxxxxxx>
- Fasttrack 100 TX2 + RH 7.3 = 33MB/s ?
- From: "Arunas" <arunas@xxxxxxxxxx>
- Re: Intel SE7500WV2 w/Fastrak TX2000 Lite RAID
- From: Samuel Flory <sflory@xxxxxxxxxxxx>
- Re: Intel SE7500WV2 w/Fastrak TX2000 Lite RAID
- From: Edward Muller <edwardam@xxxxxxxxxxxx>
- Re: Intel SE7500WV2 w/Fastrak TX2000 Lite RAID
- From: Samuel Flory <sflory@xxxxxxxxxxxx>
- RE: read_intr / DriveStatusError errors with Promise FT 100
- From: "Eric Christensen" <eric@xxxxxxxxxxxxxxxxxxx>
- Re: Intel SE7500WV2 w/Fastrak TX2000 Lite RAID
- From: Edward Muller <edwardam@xxxxxxxxxxxx>
- Re: Intel SE7500WV2 w/Fastrak TX2000 Lite RAID
- From: Samuel Flory <sflory@xxxxxxxxxxxx>
- RE: read_intr / DriveStatusError errors with Promise FT 100
- From: "Aldert E. van der Laan" <aldert@xxxxxxxxxxxxx>
- Intel SE7500WV2 w/Fastrak TX2000 Lite RAID
- From: Edward Muller <edwardam@xxxxxxxxxxxx>
- RE Adaptec AAR-1200A charset="us-ascii"
- From: "Steve Bates" <steve.bates@xxxxxxxxxxxxxx>
- Re: Adaptec AAR-1200A
- From: Samuel Flory <sflory@xxxxxxxxxxxx>
- Re: Adaptec AAR-1200A
- From: "Francesco Peeters" <Francesco@xxxxxxxxxxxxxx>
- Adaptec AAR-1200A
- From: "Francesco Peeters" <Francesco@xxxxxxxxxxxxxx>
- Re: is it worth using ata-raid?
- From: Samuel Flory <sflory@xxxxxxxxxxxx>
- Re: is it worth using ata-raid?
- From: Murty Rompalli <murty@xxxxxxxxxxxxxxx>
- is it worth using ata-raid?
- From: "Randy" <randy@xxxxxxxxxxxx>
- RE: read_intr / DriveStatusError errors with Promise FT 100
- From: "Eric Christensen" <eric@xxxxxxxxxxxxxxxxxxx>
- Re: redhat 8.0 and HighPoint372 ATA/133 RAID
- From: Shark <tester0@xxxxxxxx>
- Re: redhat 8.0 and HighPoint372 ATA/133 RAID
- From: "Shark" <tester0@xxxxxxxx>
- Re: redhat 8.0 and HighPoint372 ATA/133 RAID
- From: "Shaun" <shaunb@xxxxxxxxx>
- Re: redhat 8.0 and HighPoint372 ATA/133 RAID
- From: Arjan van de Ven <arjanv@xxxxxxxxxx>
- Re: redhat 8.0 and HighPoint372 ATA/133 RAID
- From: "Steven Raymond" <stever@xxxxxxxxxxx>
- Re: redhat 8.0 and HighPoint372 ATA/133 RAID
- From: "Shark" <tester0@xxxxxxxx>
- Re: redhat 8.0 and HighPoint372 ATA/133 RAID
- From: "Shaun" <shaunb@xxxxxxxxx>
- Re: redhat 8.0 and HighPoint372 ATA/133 RAID
- From: Arjan van de Ven <arjanv@xxxxxxxxxx>
- Re: redhat 8.0 and HighPoint372 ATA/133 RAID
- From: "Steven Raymond" <phoebe@xxxxxxxxxxx>
- Re: redhat 8.0 and HighPoint372 ATA/133 RAID
- From: "Shark" <tester0@xxxxxxxx>
- Re: redhat 8.0 and HighPoint372 ATA/133 RAID
- From: Robert Gertson <super_nova@xxxxxxxxxxxxx>
- Re: redhat 8.0 and HighPoint372 ATA/133 RAID
- From: "Shaun" <shaunb@xxxxxxxxx>
- Re: redhat 8.0 and HighPoint372 ATA/133 RAID
- From: Shark <tester0@xxxxxxxx>
- Re: redhat 8.0 and HighPoint372 ATA/133 RAID
- From: Shark <tester0@xxxxxxxx>
- Re: redhat 8.0 and HighPoint372 ATA/133 RAID
- From: "Shaun" <shaunb@xxxxxxxxx>
- Re: redhat 8.0 and HighPoint372 ATA/133 RAID
- From: "Jeff Kaplan" <jkaplan@xxxxxxxxxxxxxxxxxxxxx>
- redhat 8.0 and HighPoint372 ATA/133 RAID
- From: "Shaun" <shaunb@xxxxxxxxx>
- Re: read_intr / DriveStatusError errors with Promise FT 100
- From: Samuel Flory <sflory@xxxxxxxxxxxx>
- read_intr / DriveStatusError errors with Promise FT 100
- From: "Eric Christensen" <eric@xxxxxxxxxxxxxxxxxxx>
- PDC 20276 controller and Red Hat 8.0
- From: Augusto Cezar Amaral <acacsmail@xxxxxxxxxxxx>
- read_intr / DriveStatusError errors with Promise FT 100
- From: "Eric Christensen" <eric@xxxxxxxxxxxxxxxxxxx>
- New Highpoint 370 drivers v1.31 - anyone?
- From: "Steven Raymond" <phoebe@xxxxxxxxxxx>
- Re: using a raid card with V8.0
- From: Arjan van de Ven <arjanv@xxxxxxxxxx>
- using a raid card with V8.0
- From: "Russ.Lunn" <russ.lunn@xxxxxxxxxx>
- Debian installation with adaptec 1200a eide raid controller
- From: "wildwolf@xxxxxxxxx" <wildwolf@xxxxxxxxx>
- RE: HPT370 RAID0 on RHL 8.0 from upgraded RHL 7.3
- From: Shark <tester0@xxxxxxxx>
- RE: HPT370 RAID0 on RHL 8.0 from upgraded RHL 7.3
- From: "David Leffler" <dleffler@xxxxxxxxx>
- Re: HPT370 RAID0 on RHL 8.0 from upgraded RHL 7.3
- From: Shark <tester0@xxxxxxxx>
- Re: HPT370 RAID0 on RHL 8.0 from upgraded RHL 7.3
- From: "Jeff Kaplan" <jkaplan@xxxxxxxxxxxxxxxxxxxxx>
- Re: HPT370 RAID0 on RHL 8.0 from upgraded RHL 7.3
- From: Shark <tester0@xxxxxxxx>
- HPT370 RAID0 on RHL 8.0 from upgraded RHL 7.3
- From: Brian Curtis <bcurtis@xxxxxxxxxxx>
- rebuilding of array - bug or sth ?
- From: gnu_is_not_unix <gnu_is_not_unix@xxxxx>
- Re: FastTrak 100 Lite and kernel bigger 2.4.18-10 on RedHAt 7.3
- From: Albert Dengg <a_d@xxxxxx>
- FastTrak 100 Lite and kernel bigger 2.4.18-10 on RedHAt 7.3
- From: Jochen Kächelin <jk@xxxxxxxxxxxxxx>
- FastTrak 100 Lite and RedHat 8.0
- From: Jochen Kächelin <jk@xxxxxxxxxxxxxx>
- Re: working on 20271 (Promise TX2000)
- From: Florent Martineau <florent.martineau@xxxxxxxxxxx>
- working on 20271 (Promise TX2000)
- From: Moritz Esser <Moritz.Esser@xxxxxx>
- Re: Promise FastTrack Tx2 and RedHat 8
- From: Samuel Flory <sflory@xxxxxxxxxxxx>
- Re: Promise FastTrack Tx2 and RedHat 8
- From: Steve & Dee McInerney <stedee@xxxxxxxxxxxxxxx>
- Re: Sil (CMD) 0680 ATA RAID controller on Linux (2.4.19)
- From: Arjan van de Ven <arjanv@xxxxxxxxxx>
- RE: Sil (CMD) 0680 ATA RAID controller on Linux (2.4.19)
- From: "Rashid Winter" <rashid@xxxxxxxxxxxxxx>
- Re: Promise FastTrack Tx2 and RedHat 8
- From: Murty Rompalli <murty@xxxxxxxxxxxxxxx>
- Re: Promise Fasttrak problems
- From: Unknown <silentservice@xxxxxxx>
- Re: FastTrack RAID Erros
- From: Samuel Flory <sflory@xxxxxxxxxxxx>
- Sil (CMD) 0680 ATA RAID controller on Linux (2.4.19)
- From: Sergey Basmanov <sergey@xxxxxxxxxx>
- Re: Re: Promise FastTrack Tx2 and RedHat 8 - minor progress
- From: stedee@xxxxxxxxxxxxxxx
- Re: Promise FastTrack Tx2 and RedHat 8 - minor progress
- From: Samuel Flory <sflory@xxxxxxxxxxxx>
- Re: working on 20271 (Promise TX2000)
- From: Florent Martineau <florent.martineau@xxxxxxxxxxx>
- Re: working on 20271 (Promise TX2000)
- From: Moritz Esser <Moritz.Esser@xxxxxx>
- Re: working on 20271 (Promise TX2000)
- From: Florent Martineau <florent.martineau@xxxxxxxxxxx>
- working on 20271 (Promise TX2000)
- From: Moritz Esser <Moritz.Esser@xxxxxx>
- Promise FastTrack Tx2 and RedHat 8 - minor progress
- From: Steve & Dee McInerney <stedee@xxxxxxxxxxxxxxx>
- Re: Promise Fasttrak problems
- From: Florent Martineau <florent.martineau@xxxxxxxxxxx>
- Re: Promise Fasttrak problems
- From: Unknown <silentservice@xxxxxxx>
- RE: Promise Fasttrak problems
- From: Gary Shadley <shadley.4@xxxxxxx>
- Re: In which device i have to check for bad blocks
- From: Forge <forge@xxxxxxx>
- Re: Promise Fasttrak problems
- From: Forge <forge@xxxxxxx>
- Re: In which device i have to check for bad blocks
- From: Pavlos Parissis <p_pavlos@xxxxxxxxxxx>
- Promise Fasttrak problems
- From: Mokuso <mokuso@xxxxxxxxxxxxx>
- Re: In which device i have to check for bad blocks
- From: Murty Rompalli <murty@xxxxxxxxxxxxxxx>
- CMD680RAID
- From: "Rashid Winter" <rashid@xxxxxxxxxxxxxx>
- CMD680RAID
- From: "Rashid Winter" <rashid@xxxxxxxxxxxxxx>
- Re: In which device i have to check for bad blocks
- From: Shark <tester0@xxxxxxxx>
- In which device i have to check for bad blocks
- From: Pavlos Parissis <p_pavlos@xxxxxxxxxxx>
- FastTrack RAID Erros
- From: "Robert Gertson" <super_nova@xxxxxxxxxxxxx>
- Re: very strange error in the logs
- From: Pavlos Parissis <p_pavlos@xxxxxxxxxxx>
- Re: Updating Redhat 7.3 to 8.0 with PDC20276 controller
- From: Samuel Flory <sflory@xxxxxxxxxxxx>
- Updating Redhat 7.3 to 8.0 with PDC20276 controller
- From: Johann Uhrmann <johann.uhrmann@xxxxxxxxxx>
- Re: Re: hpt372 problem with debian
- From: Hrvoje Bogunovic <hrvoje.bogunovic@xxxxxx>
- HPT366-ABIT-KR7ARAID
- From: Rich Thompson <rich@xxxxxxxxxxxxxxxxx>
- very strange error in the logs
- From: Pavlos Parissis <p_pavlos@xxxxxxxxxxx>
- SuperTrak 6000 and Adaptec 2940U
- From: bhkwan@xxxxxxxxxxxxxxxx
- Re: udma with fastTrak 2000 ?
- From: Samuel Flory <sflory@xxxxxxxxxxxx>
- udma with fastTrak 2000 ?
- From: Florent Martineau <florent.martineau@xxxxxxxxxxx>
- Last Promise Drivers
- From: Florent Martineau <florent.martineau@xxxxxxxxxxx>
- Re: hpt372 problem with debian
- From: "Shark" <tester0@xxxxxxxx>
- hpt372 problem with debian
- From: Hrvoje Bogunovic <hrvoje.bogunovic@xxxxxx>
- fasttrak sx4000 raid controller under linux kernel 2.4.19
- From: "slf82na" <slf82na@xxxxxxxxxxxxxxx>
- Re: Redhat 7.3 detects two separate hard drives which are supposed to be in a RAID-0 on a KG7-RAID mobo. Why?
- From: Shark <tester0@xxxxxxxx>
- Re: goodbye RedHat
- From: "Salim Badakhhani" <salim@xxxxxxxxxx>
- Re: Seagate ST34321
- From: HOFMANN_ROBERT_G_III@xxxxxxxxx
- Re: RedHat 8 installation on a FastTrak RAID
- From: Richard Barrington <rich_b_nz@xxxxxxxxxxxx>
- Re: RedHat 8 installation on a FastTrak RAID
- From: Florent Martineau <florent.martineau@xxxxxxxxxxx>
- Re: RedHat 8 installation on a FastTrak RAID
- From: "david_com@xxxxxxxxxxx" <david_com@xxxxxxxxxxx>
- Re: point me in the right direction...
- From: Joseph Tate <jtate@xxxxxxxxxxxxxxxxx>
- point me in the right direction...
- From: Scott Evans <gse@xxxxxxxxxxxxx>
- Re: RedHat 8 installation on a FastTrak RAID
- From: Florent Martineau <florent.martineau@xxxxxxxxxxx>
- Seagate ST34321
- From: Berend Smith <b_david_smith@xxxxxxxxx>
- RedHat 8 installation on a FastTrak RAID
- From: "David Moreno" <david_com@xxxxxxxxxxx>
- RE: What is ATARAID and how does it work?
- From: Gary Shadley <shadley.4@xxxxxxx>
- Redhat 7.3 detects two separate hard drives which are supposed to be in a RAID-0 on a KG7-RAID mobo. Why?
- From: Roumen Semov <rumcho@xxxxxxxxx>
- please help
- From: "D-ViBE" <dvibe@xxxxxxxxx>
- Re: What is ATARAID and how does it work?
- From: Thorsten Jungblut <tjungblu@xxxxxxxxxxxxxx>
- What is ATARAID and how does it work?
- From: Gary Shadley <shadley.4@xxxxxxx>
- Re: Stuck with Promise FastTrack
- From: Samuel Flory <sflory@xxxxxxxxxxxx>
- Re: Stuck with Promise FastTrack
- From: Matthias Saou <matthias@xxxxxxxxxxxx>
- RE: Stuck with Promise FastTrack
- From: Gary Shadley <shadley.4@xxxxxxx>
- Re: Stuck with Promise FastTrack
- From: Sandro Dentella <sandro.dentella@xxxxxx>
- Re: Stuck with Promise FastTrack
- From: Matthias Saou <matthias@xxxxxxxxxxxx>
- RE: Stuck with Promise FastTrack
- From: Gary Shadley <shadley.4@xxxxxxx>
- Re: Stuck with Promise FastTrack
- From: Matthias Saou <matthias@xxxxxxxxxxxx>
- Re: Stuck with Promise FastTrack
- From: Joseph Tate <jtate@xxxxxxxxxxxxxxxxx>
- Stuck with Promise FastTrack
- From: Matthias Saou <matthias@xxxxxxxxxxxx>
- Best way of installing FastTrak66 on RH8 (RAID 0)
- From: Jörg Mühlberger <ft@xxxxxxxxxxxxxxxxx>
- Best way of installing FastTrak66 on RH8 (RAID 0)
- From: Jörg Mühlberger <ft@xxxxxxxxxxxxxxxxx>
- Promise Raid PDC202065
- From: Gary Shadley <shadley.4@xxxxxxx>
- goodbye RedHat
- From: Ed Schernau <ed@xxxxxxxxxxxx>
- Re: Does ATARAID resync an array if there's a power failure?
- From: "Dave Stubbs" <dstubbs@xxxxxxxxxxxxxxxxxxxxxxx>
- Re: TX2000 ft.o or pdcraid.o?
- From: Sandro Dentella <sandro.dentella@xxxxxx>
- Re: TX2000 ft.o or pdcraid.o?
- From: Albert Dengg <a_d@xxxxxx>
- TX2000 ft.o or pdcraid.o?
- From: Sandro Dentella <sandro.dentella@xxxxxx>
- Serial ATA RAID
- From: <marvinstarvin@xxxxxxxxxxxxxxxx>
- Help with newbie Linux RAID install
- From: bleh blehh <junkmales@xxxxxxxxx>
- RE: Does ATARAID resync an array if there's a power failure?
- From: "Tigchelaar, Martijn Olivier" <martijnt@xxxxxxxxxxxx>
- Re: Opensource Driver for hpt372 chipset
- From: Thorsten Jungblut <tjungblu@xxxxxxxxxxxxxx>
- Re: Does ATARAID resync an array if there's a power failure?
- From: Thorsten Jungblut <tjungblu@xxxxxxxxxxxxxx>
- Re: Does ATARAID resync an array if there's a power failure?
- From: Richard Barrington <rich_b_nz@xxxxxxxxxxxx>
- Re: Opensource Driver for hpt372 chipset
- From: Murty Rompalli <murty@xxxxxxxxxxxxxxx>
- Re: Opensource Driver for hpt372 chipset
- From: Forge <forge@xxxxxxx>
- Re: Does ATARAID resync an array if there's a power failure?
- From: Murty Rompalli <murty@xxxxxxxxxxxxxxx>
- Opensource Driver for hpt372 chipset
- From: Hydrian <hydrian@xxxxxxxxxxxxxxxxxxxx>
- Install RH 8.0 onto RAID0 Promise
- From: Ed Schernau <ed@xxxxxxxxxxxx>
- Re: Problem Complining Opensource Linux Drivers for the RocketRaid 133 with GCC 3.2
- From: Arjan van de Ven <arjanv@xxxxxxxxxx>
- Problem Complining Opensource Linux Drivers for the RocketRaid 133 with GCC 3.2
- From: Hydrian <hydrian@xxxxxxxxxxxxxxxxxxxx>
- Re: Does ATARAID resync an array if there's a power failure?
- From: Richard Barrington <rich_b_nz@xxxxxxxxxxxx>
- Re: Does ATARAID resync an array if there's a power failure?
- From: Pavlos Parissis <p_pavlos@xxxxxxxxxxx>
- Re: Does ATARAID resync an array if there's a power failure?
- From: Richard Barrington <rich_b_nz@xxxxxxxxxxxx>
- Re: Does ATARAID resync an array if there's a power failure?
- From: Pavlos Parissis <p_pavlos@xxxxxxxxxxx>
- Re: Does ATARAID resync an array if there's a power failure?
- From: Thorsten Jungblut <tjungblu@xxxxxxxxxxxxxx>
- Re: Does ATARAID resync an array if there's a power failure?
- From: Pavlos Parissis <p_pavlos@xxxxxxxxxxx>
- Re: Does ATARAID resync an array if there's a power failure?
- From: Thorsten Jungblut <tjungblu@xxxxxxxxxxxxxx>
- Re: Does ATARAID resync an array if there's a power failure?
- From: Richard Barrington <rich_b_nz@xxxxxxxxxxxx>
- Re: Does ATARAID resync an array if there's a power failure?
- From: Thorsten Jungblut <tjungblu@xxxxxxxxxxxxxx>
- Does ATARAID resync an array if there's a power failure?
- From: "Dave Stubbs" <dstubbs@xxxxxxxxxxxxxxxxxxxxxxx>
- Re: Promise raid controller moves ide0 and ide1
- From: Pavlos Parissis <p_pavlos@xxxxxxxxxxx>
- Promise Raid Controller on MSI ULTRA 133
- From: "Petr Lukes /JUMP/" <lukes@xxxxxxx>
- Re: How to get source code of RAID ?
- From: Richard Barrington <rich_b_nz@xxxxxxxxxxxx>
- Re: Driver for RedHat Linux 8.0
- From: Arjan van de Ven <arjanv@xxxxxxxxxx>
- Re: hot swapping
- From: Samuel Flory <sflory@xxxxxxxxxxxx>
- Re: hot swapping
- From: Richard Barrington <rich_b_nz@xxxxxxxxxxxx>
- about promise fasttrack 100 tx2
- From: Pavlos Parissis <p_pavlos@xxxxxxxxxxx>
- Re: hot swapping
- From: Samuel Flory <sflory@xxxxxxxxxxxx>
- hot swapping
- From: Richard Barrington <rich_b_nz@xxxxxxxxxxxx>
- Re: 3ware suppliers
- From: Richard Barrington <rich_b_nz@xxxxxxxxxxxx>
- Re: 3ware suppliers
- From: Aaron Martin <listraid@xxxxxxxxxxxx>
- Re: 3ware suppliers
- From: Brent McDowell <brent@xxxxxxxxxxxx>
- 3ware suppliers
- From: Aaron Martin <listraid@xxxxxxxxxxxx>
- How to get source code of RAID ?
- From: "Leon Zhang (Beijing)" <LeonZhang@xxxxxxxxxxxxxx>
- System freezes completely when copying from hde1 to hdg1 (both on PDC20265, kernel 2.4.19-ac4)
- From: Torben Frey <ataraid@xxxxxx>
- System freezes completely when copying from hde1 to hdg1 (both on PDC20265, kernel 2.4.19-ac4)
- From: Torben Frey <ataraid@xxxxxx>
- Re: hpt370 + kernel 2.4.19
- From: Forge <forge@xxxxxxx>
- hpt370 + kernel 2.4.19
- From: "Jorge Gomez" <carmurio@xxxxxxxx>
- RE: TX2000 and ATARAID - HOW? Please, help.
- From: "Max Lytvyn" <litvin@xxxxxxxxxx>
- RE: TX2000 and ATARAID - HOW? Please, help.
- From: Goetz Golla <golla@xxxxxxxxxxx>
- Driver for RedHat Linux 8.0
- From: "paulor" <paulo-rogerio@xxxxxxxxxxxxx>
- RE: TX2000 and ATARAID - HOW? Please, help.
- From: "Max Lytvyn" <litvin@xxxxxxxxxx>
- decision time...promise pdc20276
- From: "Nathan Stahlman" <hackthese@xxxxxxxxxxxxxxxxxxxxx>
- Re: TX2000 and ATARAID - HOW? Please, help.
- From: Samuel Flory <sflory@xxxxxxxxxxxx>
- decision time...promise pdc20276
- From: "Nathan Stahlman" <nstahlman@xxxxxxxx>
- Re: 3ware escalade 7500 cards
- From: Samuel Flory <sflory@xxxxxxxxxxxx>
- Re: 3ware escalade 7500 cards
- From: Karl Huysmans <karl.huysmans@xxxxxxxxxxx>
- Re: 3ware escalade 7500 cards
- From: Forge <forge@xxxxxxx>
- 3ware escalade 7500 cards
- From: "Lists @ Apted Technologies Inc." <lists@xxxxxxxxxxxxx>
- Re: TX2000 and ATARAID - HOW? Please, help.
- From: <dstubbs@xxxxxxxxxxxxxxxxxxxxxxx>
- Re: TX2000 and ATARAID - HOW? Please, help.
- From: Goetz Golla <golla@xxxxxxxxxxx>
- Re: TX2000 and ATARAID - HOW? Please, help.
- From: Samuel Flory <sflory@xxxxxxxxxxxx>
- Re: Promise raid controller moves ide0 and ide1
- From: Samuel Flory <sflory@xxxxxxxxxxxx>
- Re: TX2000 and ATARAID - HOW? Please, help.
- From: "Dave Stubbs" <dstubbs@xxxxxxxxxxxxxxxxxxxxxxx>
- Re: Promise raid controller moves ide0 and ide1
- From: Frank Steiner <fst@xxxxxxxxxxxxxxxxxxxxxx>
- TX2000 and ATARAID - HOW? Please, help.
- From: "Max Lytvyn" <litvin@xxxxxxxxxx>
- Linux Software RAID Performance
- From: "Martin Korzen" <martinkorzen@xxxxxxxxxxx>
- Re: Promise raid controller moves ide0 and ide1
- From: Samuel Flory <sflory@xxxxxxxxxxxx>
- Promise FastTrak100 TX2 RAID card
- From: Neil Ayers <neil@xxxxxxxxxxxxxx>
- Re: Promise raid controller moves ide0 and ide1
- From: Frank Steiner <fsteiner@xxxxxx>
- Re: Promise raid controller moves ide0 and ide1
- From: Frank Steiner <fsteiner@xxxxxx>
- Re: Redhat 8.0 and HPT370 PCI
- From: Samuel Flory <sflory@xxxxxxxxxxxx>
- Re: Redhat 8.0 and HPT370 PCI
- From: "Jeff Kaplan" <jkaplan@xxxxxxxxxxxxxxxxxxxxx>
- [Fwd: [PATCH] 2.4.20-pre11 fix pdc20265 to off_board]
- From: Samuel Flory <sflory@xxxxxxxxxxxx>
- Re: Software or Hardware?
- From: Samuel Flory <sflory@xxxxxxxxxxxx>
- Re: Promise raid controller moves ide0 and ide1
- From: Samuel Flory <sflory@xxxxxxxxxxxx>
- Re: What to choose Att: Richard B
- From: Samuel Flory <sflory@xxxxxxxxxxxx>
- Re: Software or Hardware?
- From: "Dave Stubbs" <dstubbs@xxxxxxxxxxxxxxxxxxxxxxx>
- Re: What to choose
- From: "Dave Stubbs" <dstubbs@xxxxxxxxxxxxxxxxxxxxxxx>
- Re: Promise raid controller moves ide0 and ide1
- From: Albert Dengg <a_d@xxxxxx>
- Re: Redhat 8.0 and HPT370 PCI
- From: "j.hal" <j.hal@xxxxxxx>
- Re: What to choose Att: Richard B
- From: "Ola Fransson" <olafransson@xxxxxxx>
- Re: What to choose Att: Richard B
- From: Richard Barrington <rich_b_nz@xxxxxxxxxxxx>
- Re: What to choose Att: Richard B
- From: "Ola Fransson" <olafransson@xxxxxxx>
- Promise raid controller moves ide0 and ide1
- From: Frank Steiner <fsteiner@xxxxxx>
- Promise raid controller moves ide0 and ide1
- From: Frank Steiner <fst@xxxxxxxxxxxxxxxxxxxxxx>
- Re: What to choose
- From: Richard Barrington <rich_b_nz@xxxxxxxxxxxx>
- Re: Software or Hardware?
- From: Rob McGee <u812@xxxxxxxxxxxxx>
- Re: Software or Hardware?
- From: Samuel Flory <sflory@xxxxxxxxxxxx>
- Re: Software or Hardware?
- From: Rob McGee <i812@xxxxxxxxxxxx>
- Software or Hardware?
- From: "Dave Stubbs" <dstubbs@xxxxxxxxxxxxxxxxxxxxxxx>
- Re: What to choose
- From: "Dave Stubbs" <dstubbs@xxxxxxxxxxxxxxxxxxxxxxx>
- What to choose
- From: "Ola Fransson" <olafransson@xxxxxxx>
- Re: Redhat 8.0 and HPT370 PCI
- From: Richard Barrington <rich_b_nz@xxxxxxxxxxxx>
- Re: Redhat 8.0 and HPT370 PCI
- From: "Jeff Kaplan" <jkaplan@xxxxxxxxxxxxxxxxxxxxx>
- Re: Redhat 8.0 and HPT370 PCI
- From: Richard Barrington <rich_b_nz@xxxxxxxxxxxx>
- Redhat 8.0 and HPT370 PCI
- From: "Jeff Kaplan" <jkaplan@xxxxxxxxxxxxxxxxxxxxx>
- Re: changing from pdc20265r to 20276
- From: Albert Dengg <a_d@xxxxxx>
- Re: changing from pdc20265r to 20276
- From: Arjan van de Ven <arjanv@xxxxxxxxxx>
- changing from pdc20265r to 20276
- From: Albert Dengg <a_d@xxxxxx>
- Re: PDC20265R
- From: Iacopo Spalletti <avvisi@xxxxxxxxxxxx>
- Re: Using Promise 20276 as normal ATA device
- From: Richard Barrington <rich_b_nz@xxxxxxxxxxxx>
- Re: Using Promise 20276 as normal ATA device
- From: Sagi Bashari <sagi@xxxxxxxxxxx>
- Re: PDC20265R
- From: Forge <forge@xxxxxxx>
- Re: ATA RAID Promise PDC20276 - Solution
- From: "Nickolay Petrov - IT Divison, FEIB" <webmaster@xxxxxxxxxxxx>
- Re: Redhat 7.3, Promise 20267 chipset, Gigabyte Titan mobo for P4
- From: "Nickolay Petrov - IT Divison, FEIB" <webmaster@xxxxxxxxxxxx>
- Re: Using Promise 20276 as normal ATA device
- From: Samuel Flory <sflory@xxxxxxxxxxxx>
- Re: Using Promise 20276 as normal ATA device
- From: Cupy <cupy@xxxxxxxx>
- Re: Using Promise 20276 as normal ATA device
- From: Sagi Bashari <sagi@xxxxxxxxxxx>
- Re: Using Promise 20276 as normal ATA device
- From: Martin Cupak <Martin.Cupak@xxxxxxxxx>
- Re: Using Promise 20276 as normal ATA device
- From: Samuel Flory <sflory@xxxxxxxxxxxx>
- Using Promise 20276 as normal ATA device
- From: Sagi Bashari <sagi@xxxxxxxxxxx>
- Re: PDC20265R
- From: Iacopo Spalletti <avvisi@xxxxxxxxxxxx>
- HPT370 onboard with Debian 3.0
- From: "Jorge Gomez" <carmurio@xxxxxxxx>
- Re: Mandrake 9.0 and HPT370 help
- From: Rob McGee <u812@xxxxxxxxxxxxx>
- Re: Ataraid-list digest, Vol 1 #326 - 5 msgs
- From: Jack and Melissa McSwain <jrmcswain@xxxxxxxxxxxxx>
- Re: PDC20265R
- From: Samuel Flory <sflory@xxxxxxxxxxxx>
- PDC20265R
- From: Iacopo Spalletti <avvisi@xxxxxxxxxxxx>
- RE: Mandrake 9.0 and HPT370 help
- From: "Miroslav BENES" <mbenes@xxxxxxxx>
- RE: Mandrake 9.0 and HPT370 help
- From: "David Leffler" <dleffler@xxxxxxxxx>
- Re: Promise 20276 and Redhat 8.0
- From: Samuel Flory <sflory@xxxxxxxxxxxx>
- Promise 20276 and Redhat 8.0
- From: "David Noel" <davidcnoel@xxxxxxxxxxx>
- Promise 20276 and Redhat 8.0
- From: "David Noel" <davidcnoel@xxxxxxxxxxx>
- Re: 0+1 RAID - kernel panic
- From: Martin Cupák <Martin.Cupak@xxxxxxxxx>
- 3x Promise pdc20268
- From: "Ola Fransson" <olafransson@xxxxxxx>
- Mandrake 9.0 and HPT370 help
- From: Dragan Toroman <toroman@xxxxxxxxxxxxx>
- Re: VP_IDE hda lost interrupt
- From: Juergen Rose <rose@xxxxxxxxxxxxxxxxx>
- VP_IDE hda lost interrupt
- Re: 3x Promise ultra100 tx2
- From: Thorsten Jungblut <tjungblu@xxxxxxxxxxxxxx>
- 3x Promise ultra100 tx2
- From: "Ola Fransson" <olafransson@xxxxxxx>
- PDC20276 / MBFastTrak133 Lite on RH73 - 2.4.18-3
- From: "Jens W. Skov - JS Consult" <jens@xxxxxxxxxxxx>
- Re: Abit KG7-RAID
- From: Rob McGee <u812@xxxxxxxxxxxxx>
- Re: Patching 2.4.x with MBFastTrack 133 Lite code from 2.5.x?
- From: Arjan van de Ven <arjanv@xxxxxxxxxx>
- Patching 2.4.x with MBFastTrack 133 Lite code from 2.5.x?
- From: "UniquE" <CS-AntiSpam@xxxxxxx>
- Re: Abit KG7-RAID
- From: Albert Dengg <a_d@xxxxxx>
- Abit KG7-RAID
- From: Carlos Muñoz Ríos <carmurio@xxxxxxx>
- 0+1 RAID - kernel panic
- From: "Thomas Stadel" <mail@xxxxxxxxxxxxxxxx>
- PDC20271 on Slackware 8.1
- From: Rob McGee <u812@xxxxxxxxxxxxx>
- Re: Booting from ATARAID with GRUB
- From: Helge Lenz <h.lenz@xxxxxx>
- Booting from ATARAID with GRUB
- From: Goetz Golla <golla@xxxxxxxxxxx>
- Why not use Software Raid?
- From: KEMONO <KEMONO@xxxxxxxx>
- Fasttrack 100 boot to Debian
- Promise 20276 onboard, Bootable Raid1 and Software Raid
- From: Aribond <arib0nd@xxxxxxxxx>
- Getting Fasttrak100 raid1 to boot
- RE: How can I disable PDC20265 BIOS
- From: "David Wade" <david.wade@xxxxxxxxxxxxxxx>
- Re: How can I disable PDC20265 BIOS
- From: Samuel Flory <sflory@xxxxxxxxxxxx>
- Re: about Murty's HOWTO for RH7.3
- From: Maurice al-khaliedy <maurice.al@xxxxxx>
- Re: about Murty's HOWTO for RH7.3
- From: Eri Rubin <eri1@xxxxxxxxxxxxx>
- RE: How can I disable PDC20265 BIOS
- From: Richard Barrington <rich_b_nz@xxxxxxxxxxxx>
- Re: about Murty's HOWTO for RH7.3
- From: Maurice al-khaliedy <maurice.al@xxxxxx>
- RE: How can I disable PDC20265 BIOS
- From: "David Wade" <david.wade@xxxxxxxxxxxxxxx>
- Re: How can I disable PDC20265 BIOS
- From: Richard Barrington <rich_b_nz@xxxxxxxxxxxx>
- How can I disable PDC20265 BIOS
- From: "David Wade" <david.wade@xxxxxxxxxxxxxxx>
- Re: 3ware ATA Raid Controllers
- From: Forgezilla <forge@xxxxxxx>
- Re: 3ware ATA Raid Controllers
- From: Samuel Flory <sflory@xxxxxxxxxxxx>
- Re: boot from raid0
- From: Helge Lenz <h.lenz@xxxxxx>
- 3ware ATA Raid Controllers
- From: Brent McDowell <brent@xxxxxxxxxxxx>
- HPT370 problem
- From: Karl Latiss <karl@xxxxxxxxxxxxxxx>
- Re: about Murty's HOWTO for RH7.3
- From: "Eri Rubin" <eri1@xxxxxxxxxxxxx>
- Ataraid Questions
- From: "Matthias Noll" <info@xxxxxxxxx>
- Hardware raid on the Asus P4T533 (software vs hardware raid)
- From: <matac@xxxxxxxxxxxxx>
- about Murty's HOWTO for RH7.3
- From: Maurice al-khaliedy <maurice.al@xxxxxx>
- promise 20276
- From: "Damian Wojtkowiak" <damian@xxxxxxxxxx>
- UDMA on a Promise Fasttrack RAID (Debian)
- From: Marco Umgeher <marco.umgeher@xxxxxxxxxxxxxxx>
- Re: pdcraid with Promise RAID-only controllers?
- From: Samuel Flory <sflory@xxxxxxxxxxxx>
- pdcraid with Promise RAID-only controllers?
- From: Ed Byrne <ebyrne@xxxxxxxxxxx>
- boot from raid0
- From: Denny Schierz <linuxmail@xxxxxxxx>
- Re: CMD 0649 chipset
- From: Arjan van de Ven <arjanv@xxxxxxxxxx>
- Re: CMD 0649 chipset
- From: "Steve Foster" <fozzie@xxxxxxxxxxxxxxxxxxxxxxx>
- Re: CMD 0649 chipset
- From: Richard Barrington <rich_b_nz@xxxxxxxxxxxx>
- CMD 0649 chipset
- From: "Steve Foster" <fozzie@xxxxxxxxxxxxxxxxxxxxxxx>
- Re: 3 ultra100 controllers
- From: "T. Ryan Halwachs" <halwachs@xxxxxxxxxxxxx>
- Re: 3 ultra100 controllers
- From: "T. Ryan Halwachs" <halwachs@xxxxxxxxxxxxx>
- Re: Append line examples for Lilo and Grub
- From: Samuel Flory <sflory@xxxxxxxxxxxx>
- Re: Append line examples for Lilo and Grub
- From: Samuel Flory <sflory@xxxxxxxxxxxx>
- Append line examples for Lilo and Grub
- From: "Barton Hodges" <barton@xxxxxxxxxxxxxxxx>
- Re: Success - 2.4.19 with FastTrak TX2000
- From: Murty Rompalli <murty@xxxxxxxxxxxxxxx>
- Re: Success - 2.4.19 with FastTrak TX2000
- From: Barton Hodges <barton@xxxxxxxxxxxxxxxx>
- Re: Success - 2.4.19 with FastTrak TX2000
- From: Barton Hodges <barton@xxxxxxxxxxxxxxxx>
- Re: Success - 2.4.19 with FastTrak TX2000
- From: "Bob Saft" <richard_jonsson@xxxxxxxxxxx>
- Re: Success - 2.4.19 with FastTrak TX2000
- From: Murty Rompalli <murty@xxxxxxxxxxxxxxx>
- Re: HPT370 ATARAID and RedHat 7.3 troubles
- From: Murty Rompalli <murty@xxxxxxxxxxxxxxx>
- Re: hdf: status error: status=0x58 { DriveReady SeekComplete DataRequest }
- From: Murty Rompalli <murty@xxxxxxxxxxxxxxx>
- Re: CMD649: siig 'Ultra ATA-100 pci' secondary channel mapped as ide1?
- From: Andre Hedrick <andre@xxxxxxxxxxxxx>
- Re: 3 x PDC20267 (ultra100) + software raid5 => kernel panic
- From: "T. Ryan Halwachs" <halwachs@xxxxxxxxxxxxx>
- CMD649: siig 'Ultra ATA-100 pci' secondary channel mapped as ide1?
- From: "T. Ryan Halwachs" <halwachs@xxxxxxxxxxxxx>
- Re: Success - 2.4.19 with FastTrak TX2000
- From: Barton Hodges <barton@xxxxxxxxxxxxxxxx>
- Re: Success - 2.4.19 with FastTrak TX2000
- From: Martin Lillepuu <martin@xxxxxxxxxxxx>
- Re: 3 x PDC20267 (ultra100) + software raid5 => kernel panic: Attempted to kill init!
- From: John Burton <j.c.burton@xxxxxxxxxxxx>
- Re: 3 ultra100 controllers
- From: Andre Hedrick <andre@xxxxxxxxxxxxx>
- Re: 3 ultra100 controllers
- From: Alan Cox <alan@xxxxxxxxxxxxxxxxxxx>
- Re: 3 ultra100 controllers
- From: Andre Hedrick <andre@xxxxxxxxxxxxx>
- 3 ultra100 controllers
- From: "T. Ryan Halwachs" <halwachs@xxxxxxxxxxxxx>
- Re: HPT370 ATARAID and RedHat 7.3 troubles
- From: kathee <kat@xxxxxxxxx>
- HPT370 ATARAID and RedHat 7.3 troubles
- From: Mike Marackaew <mm@xxxxxxxxxxxx>
- HPT370 ATARAID and RH7.3 troubles
- From: Mike Marackaew <mm@xxxxxxxx>
- hdf: status error: status=0x58 { DriveReady SeekComplete DataRequest }
- From: Maurice al-khaliedy <maurice.al@xxxxxx>
- Success - 2.4.19 with FastTrak TX2000
- From: Barton Hodges <barton@xxxxxxxxxxxxxxxx>
- Re: problems with pdcraid and kernel 2.4.19
- From: Murty Rompalli <murty@xxxxxxxxxxxxxxx>
- problems with pdcraid and kernel 2.4.19
- From: Barton Hodges <barton@xxxxxxxxxxxxxxxx>
- Promise 20267 in DMA mode?
- From: Iain <iain@xxxxxxxxxxxxx>
- Re: RH7.3, HPT370 Controller, H E L P ! ! !
- From: Thorsten Jungblut <tjungblu@xxxxxxxxxxxxxx>
- RH7.3, HPT370 Controller, H E L P ! ! !
- From: "Martin Korzen" <martinkorzen@xxxxxxxxxxx>
- RE: pdcraid kernel 2.4.19 (Bob Saft)
- From: "Alan Miles" <alanmiles@xxxxxxxxxxxxxxx>
- Re: dual operating sys and FastTrack tx 2000...!!!
- From: "Eri Rubin" <eri1@xxxxxxxxxxxxx>
- Re: pdcraid kernel 2.4.19
- From: "Matthew Ewanchuk" <matthew@xxxxxxxxxxxxxxxxxxxxxxxxxxxx>
- Re: pdcraid kernel 2.4.19
- From: "OverclockSolutions" <overclocksolutions@xxxxxxxxxxx>
- Re: dual operating sys and FastTrack tx 2000...!!!
- From: "Sanjeev Solanki" <sanjeev_solanki@xxxxxxxxxxx>
- Re: dual operating sys and FastTrack tx 2000...!!!
- From: "Sanjeev Solanki" <sanjeev_solanki@xxxxxxxxxxx>
- Re: dual operating sys and FastTrack tx 2000...!!!
- From: Samuel Flory <sflory@xxxxxxxxxxxx>
- pdcraid kernel 2.4.19
- From: "Bob Saft" <richard_jonsson@xxxxxxxxxxx>
- dual operating sys and FastTrack tx 2000...!!!
- From: "Sanjeev Solanki" <sanjeev_solanki@xxxxxxxxxxx>
- Re: 3 x PDC20267 (ultra100) + software raid5 => kernel panic: Attempted to kill init!
- From: Kelsey Hudson <khudson@xxxxxxxxxxxxx>
- Re: ataraid tuning for 'many files'
- From: Samuel Flory <sflory@xxxxxxxxxxxx>
- 3 x PDC20267 (ultra100) + software raid5 => kernel panic: Attempted to kill init!]
- From: "T. Ryan Halwachs" <thalwachs@xxxxxxxxx>
- 3 x PDC20267 (ultra100) + software raid5 => kernel panic: Attempted to kill init!
- From: "T. Ryan Halwachs" <halwachs@xxxxxxxxxxxxx>
- Re: Vanishing array/filesystem....
- From: "T. Ryan Halwachs" <thalwachs@xxxxxxxxx>
- Re: ataraid tuning for 'many files'
- From: Murty Rompalli <murty@xxxxxxxxxxxxxxx>
- Re: RFC: Possible enhancement
- From: Thorsten Jungblut <tjungblu@xxxxxxxxxxxxxx>
- Re: RFC: Possible enhancement
- From: Arjan van de Ven <arjanv@xxxxxxxxxx>
- RFC: Possible enhancement
- From: "Michael Wright" <mikewright@xxxxxxxxxxxxxx>
- Re: mounting ntfs partitions from promise raid
- From: "Forge 2KSP3" <forge@xxxxxxx>
- ataraid tuning for 'many files'
- From: "Brendon Caligari" <bcaligari@xxxxxxxxxxxxxx>
- Re: How to setup mirror on GA7ZXR for RH 7.X
- From: "Brendon Caligari" <bcaligari@xxxxxxxxxxxxxx>
- initrd failed: device is busy (RH7.3 and HPT370)
- From: Maurice al-khaliedy <maurice.al@xxxxxx>
- How to setup mirror on GA7ZXR for RH 7.X
- From: Joseph Davis <joseph@xxxxxxxxxxxxxxxx>
- Re: promise PDC20276 / MBFastTrak133 Lite on RH73 - 2.4.18-3
- From: "Brendon Caligari" <bcaligari@xxxxxxxxxxxxxx>
- Re: How are RAID1 disks kept in sync
- From: Samuel Flory <sflory@xxxxxxxxxxxx>
- Re: mounting ntfs partitions from promise raid
- From: Scott Ebsen <multibeast_root@xxxxxxxxx>
- Re: How are RAID1 disks kept in sync
- From: Thorsten Jungblut <tjungblu@xxxxxxxxxxxxxx>
- Syncronisation question
- From: Michael Wright <mikewright@xxxxxxxxxxxxxx>
- Re: promise PDC20276 / MBFastTrak133 Lite on RH73 - 2.4.18-3
- From: Murty Rompalli <murty@xxxxxxxxxxxxxxx>
- Re: mounting ntfs partitions from promise raid
- From: "Berck E. Nash" <berck@xxxxxxxxxxxx>
- Re: mounting ntfs partitions from promise raid
- From: "Berck E. Nash" <berck@xxxxxxxxxxxx>
- Re: mounting ntfs partitions from promise raid
- From: Samuel Flory <sflory@xxxxxxxxxxxx>
- Re: mounting ntfs partitions from promise raid
- From: "Bob Saft" <richard_jonsson@xxxxxxxxxxx>
- Re: mounting ntfs partitions from promise raid
- From: Scott Ebsen <multibeast_root@xxxxxxxxx>
- How are RAID1 disks kept in sync
- From: Michael Wright <mikewright@xxxxxxxxxxxxxx>
- RE: Ogoni.
- From: "Bret Stouder" <bstouder@xxxxxxxxx>
- promise PDC20276 / MBFastTrak133 Lite on RH73 - 2.4.18-3
- From: "Brendon Caligari" <bcaligari@xxxxxxxxxxxxxx>
- Re: Ogoni.
- From: John Burton <j.c.burton@xxxxxxxxxxxx>
- Driver Disk for HPT370 RedHat 7.3
- From: Maurice al-khaliedy <maurice.al@xxxxxx>
- Ogoni.
- From: "Prince Tamuno Daniels" <tamuno-daniels@xxxxxxxxx>
- Re: HPT370 RAID0 hangs under heavy load
- From: "Berck E. Nash" <berck@xxxxxxxxxxxx>
- Re: HPT370 RAID0 hangs under heavy load
- From: "Berck E. Nash" <berck@xxxxxxxxxxxx>
- Re: HPT370 RAID0 hangs under heavy load
- From: Bas Hulsken <bhulsken@xxxxxxxxxxxxxx>
- Re: why not use the promise scusi emulation driver ?
- From: Arjan van de Ven <arjanv@xxxxxxxxxx>
- RE: why not use the promise scusi emulation driver ?
- From: Richard Barrington <rich_b_nz@xxxxxxxxxxxx>
- RE: why not use the promise scusi emulation driver ?
- From: HOFMANN_ROBERT_G_III@xxxxxxxxx
- Re: Question about using FAT32 with ataraid and Promise FT100
- From: "Forge 2KSP3" <forge@xxxxxxx>
- Question about using FAT32 with ataraid and Promise FT100
- From: Michael Wright <mikewright@xxxxxxxxxxxxxx>
- Re: Ataraid-list digest, Vol 1 #285 - 12 msgs
- From: "Berck E. Nash" <berck@xxxxxxxxxxxx>
- Re: why not use the promise scusi emulation driver ?
- From: "Eri Rubin" <eri1@xxxxxxxxxxxxx>
- Re: Ataraid-list digest, Vol 1 #285 - 12 msgs
- From: Bas Hulsken <bhulsken@xxxxxxxxxxxxxx>
- ST Lab Ultra ATA133 RAID PCI 2.2 Controller Card
- From: Jul <julog@xxxxxxxxxxxx>
- RE: why not use the promise scusi emulation driver ?
- From: "Jens W. Skov - JS Consult" <jens@xxxxxxxxxxxx>
- RE: why not use the promise scusi emulation driver ?
- From: "Jens W. Skov - JS Consult" <jens@xxxxxxxxxxxx>
- RE: why not use the promise scusi emulation driver ?
- From: <yoram@xxxxxxxxxxxx>
- RE: why not use the promise scusi emulation driver ?
- From: "Jens W. Skov - JS Consult" <jens@xxxxxxxxxxxx>
- RE: why not use the promise scusi emulation driver ?
- From: <yoram@xxxxxxxxxxxx>
- Re: why not use the promise scusi emulation driver ?
- From: Arjan van de Ven <arjanv@xxxxxxxxxx>
- RE: why not use the promise scusi emulation driver ?
- From: <yoram@xxxxxxxxxxxx>
- why not use the promise scusi emulation driver ?
- From: "Eri Rubin" <eri1@xxxxxxxxxxxxx>
- Promise 20276
- From: "Matthew Ewanchuk" <matthew@xxxxxxxxxxxxxxxxxxxxxxxxxxxx>
- HPT370 RAID0 hangs under heavy load
- From: "Berck E. Nash" <berck@xxxxxxxxxxxx>
- Re: Murty ??
- From: Murty Rompalli <murty@xxxxxxxxxxxxxxx>
- Re: Vanishing array/filesystem....
- From: "Forge 2KSP3" <forge@xxxxxxx>
- RE: Still 20265
- From: <yoram@xxxxxxxxxxxx>
- Still 20265
- From: "Jens W. Skov - JS Consult" <jens@xxxxxxxxxxxx>
- mounting ntfs partitions from promise raid
- From: "Bob Saft" <richard_jonsson@xxxxxxxxxxx>
- Vanishing array/filesystem....
- From: "Mike Kirk" <kenora@xxxxxxxxxx>
- Fwd: Re: Murty ??
- From: Stefan Lange <s.lange@xxxxxxxxxxxxx>
- Re: Murty ??
- From: Stefan Lange <s.lange@xxxxxxxxxxxxx>
- Re: Murty??
- From: Stefan Lange <s.lange@xxxxxxxxxxxxx>
- raid 0 pdc20276 and rh 7.2/7
- From: Filip Valeriu <filip_valeriu@xxxxxxxxx>
- Re: pdcraid won't work when using CONFIG_PDC202XX_FORCE
- From: "Alan Miles" <alanmiles@xxxxxxxxxxxxxxx>
- Re: TIPS FOR Redhat 7.3 with ATARAID
- From: "Jens W. Skov - JS Consult" <jens@xxxxxxxxxxxx>
- RE: Ogoni.
- From: Murty Rompalli <murty@xxxxxxxxxxxxxxx>
- Re: TIPS FOR Redhat 7.3 with ATARAID
- From: Murty Rompalli <murty@xxxxxxxxxxxxxxx>
- assistance
- From: "ken lohn" <kenjohn@xxxxxxxxxxxxx>
- RE: Ogoni.
- From: Richard Barrington <rich_b_nz@xxxxxxxxxxxx>
- RE: Ogoni.
- From: "Bret Stouder" <bstouder@xxxxxxxxx>
- Ogoni.
- From: "Prince Tamuno Daniels " <tamuno-daniels@xxxxxxxxx>
- pdcraid won't work when using CONFIG_PDC202XX_FORCE
- From: Martin Stjernholm <mast@xxxxxxxxxxxxxx>
- Re: TIPS FOR Redhat 7.3 with ATARAID
- From: "Jens W. Skov - JS Consult" <jens@xxxxxxxxxxxx>
- Re: Rh 7.3
- From: Richard Barrington <rich_b_nz@xxxxxxxxxxxx>
- Re: TIPS FOR Redhat 7.3 with ATARAID
- From: Richard Barrington <rich_b_nz@xxxxxxxxxxxx>
- Rh 7.3
- From: "Eri Rubin" <eri1@xxxxxxxxxxxxx>
- Re: TIPS FOR Redhat 7.3 with ATARAID
- From: "Jens W. Skov - JS Consult" <jens@xxxxxxxxxxxx>
- Re: TIPS FOR Redhat 7.3 with ATARAID
- From: Richard Barrington <rich_b_nz@xxxxxxxxxxxx>
- Re: TIPS FOR Redhat 7.3 with ATARAID
- From: "Jens W. Skov - JS Consult" <jens@xxxxxxxxxxxx>
- Re: TIPS FOR Redhat 7.3 with ATARAID
- From: "Jens W. Skov - JS Consult" <jens@xxxxxxxxxxxx>
- Re: TIPS FOR Redhat 7.3 with ATARAID
- From: "Jens W. Skov - JS Consult" <jens@xxxxxxxxxxxx>
- Re: Murty??
- From: Murty Rompalli <murty@xxxxxxxxxxxxxxx>
- Re: TIPS FOR Redhat 7.3 with ATARAID
- From: Murty Rompalli <murty@xxxxxxxxxxxxxxx>
- Re: Murty??
- From: Stefan Lange <s.lange@xxxxxxxxxxxxx>
- Re: TIPS FOR Redhat 7.3 with ATARAID
- From: "Jens W. Skov - JS Consult" <jens@xxxxxxxxxxxx>
- RE: RedHat 7.3 and Abit KG7-RAID
- From: "Martijn Olivier Tigchelaar" <martijnt@xxxxxxxxxxxx>
- Re: Kernel 2.4.19 ataraid problem?
- From: Samuel Flory <sflory@xxxxxxxxxxxx>
- Problem with Kernel 2.5... Resolved!
- From: Stefano Miglia <stefano@xxxxxxxxxxxxxxxxxx>
- Silicon Image SIL0680 chipset for Linux
- From: "Gie Cie" <giecie@xxxxxxxxxxx>
- Re: 3 x pdc20267 (ultra100) + software raid => problems
- From: John Burton <j.c.burton@xxxxxxxxxxxx>
- Re: Murty??
- From: Murty Rompalli <murty@xxxxxxxxxxxxxxx>
- Murty??
- From: stefan.lange@xxxxxxxxxxxxx
- Re: Kernel 2.4.19 ataraid problem?
- From: "Forge 2KSP3" <forge@xxxxxxx>
- Re: ataraid +kernel 2.4.9-31
- From: "Forge 2KSP3" <forge@xxxxxxx>
- Re: Kernel 2.4.19 ataraid problem?
- From: Richard Barrington <rich_b_nz@xxxxxxxxxxxx>
- Kernel 2.4.19 ataraid problem?
- From: Randy Broman <rbroman@xxxxxxxxxxx>
- TIPS FOR Redhat 7.3 with ATARAID
- From: Murty Rompalli <murty@xxxxxxxxxxxxxxx>
- Re: ataraid +kernel 2.4.9-31
- From: stefan.lange@xxxxxxxxxxxxx
- Promise 20265
- From: "Jens W. Skov - JS Consult" <jens@xxxxxxxxxxxx>
- Re: ataraid +kernel 2.4.9-31
- From: "Forge 2KSP3" <forge@xxxxxxx>
- Re: 3 x pdc20267 (ultra100) + software raid => problems get worse
- From: "T. Ryan Halwachs" <thalwachs@xxxxxxxxx>
- ataraid +kernel 2.4.9-31
- From: stefan.lange@xxxxxxxxxxxxx
- Re: 3 x pdc20267 (ultra100) + software raid => problems get worse
- From: Samuel Flory <sflory@xxxxxxxxxxxx>
- 3 x pdc20267 (ultra100) + software raid => problems get worse
- From: "T. Ryan Halwachs" <thalwachs@xxxxxxxxx>
- 3 x pdc20267 (ultra100) + software raid => problems
- From: "T. Ryan Halwachs" <thalwachs@xxxxxxxxx>
- Re: Problem with Kernel 2.5 (2)
- From: Samuel Flory <sflory@xxxxxxxxxxxx>
- Re: Problem with Kernel 2.5
- From: Samuel Flory <sflory@xxxxxxxxxxxx>
- Re: Problem with Kernel 2.5 (2)
- From: Arjan van de Ven <arjanv@xxxxxxxxxx>
- Problem with Kernel 2.5 (2)
- From: Stefano Miglia <stefano@xxxxxxxxxxxxxxxxxx>
- Re: Problem with Kernel 2.5
- From: Juraj <juraj@xxxxxxxxxxx>
- Sorry for bad formatting...
- From: Stefano Miglia <stefano@xxxxxxxxxxxxxxxxxx>
- Problem with Kernel 2.5
- From: Stefano Miglia <stefano@xxxxxxxxxxxxxxxxxx>
- RedHat 7.3 and Abit KG7-RAID
- From: Maurice al-khaliedy <maurice.al@xxxxxx>
- Re: Promise 20276 and RAID5
- From: Richard Barrington <rich_b_nz@xxxxxxxxxxxx>
- Re: driver
- From: Richard Barrington <rich_b_nz@xxxxxxxxxxxx>
- driver
- From: "Frank Eagle" <Frank_Eagle_@xxxxxxxxxxx>
- Promise 20276 and RAID5
- From: Aaron Martin <listraid@xxxxxxxxxxxx>
- RE: ATA RAID Promise PDC20276
- From: <yoram@xxxxxxxxxxxx>
- RE: ATA RAID Promise PDC20276
- From: Richard Barrington <rich_b_nz@xxxxxxxxxxxx>
- RE: ATA RAID Promise PDC20276
- From: "Alan Miles" <alanmiles@xxxxxxxxxxxxxxx>
- redhat 7.3 installation with FastTrack 100 Lite
- From: "Camillo Granchelli" <camillo.granchelli@xxxxxxxxxxx>
- RE: ATA RAID Promise PDC20276
- From: Richard Barrington <rich_b_nz@xxxxxxxxxxxx>
- RE: ATA RAID Promise PDC20276
- From: <yoram@xxxxxxxxxxxx>
- RE: RH7.3 and Promise 20265
- From: "Jens W. Skov - JS Consult" <jens@xxxxxxxxxxxx>
- ADV: Harvest lots of E-mail addresses quickly !
- From: emailharvest@xxxxxxxxx
- RE: ATA RAID Promise PDC20276
- From: Richard Barrington <rich_b_nz@xxxxxxxxxxxx>
- RE: ATA RAID Promise PDC20276
- From: <yoram@xxxxxxxxxxxx>
- Newbie quick pointer request
- From: "Brian Kaney" <brian@xxxxxxxxxxxxxx>
- Re: ATA RAID Promise PDC20276
- From: Richard Barrington <rich_b_nz@xxxxxxxxxxxx>
- RE: Problems with 2.4.19 Kernel and Promise Fastrak100 RAID Controller (2.4.18 works)
- From: <yoram@xxxxxxxxxxxx>
- Problems with 2.4.19 Kernel and Promise Fastrak100 RAID Controller (2.4.18 works)
- From: "Alan Miles" <alanmiles@xxxxxxxxxxxxxxx>
- RE: ATA RAID Promise PDC20276
- From: Samuel Flory <sflory@xxxxxxxxxxxx>
- Re: ATA RAID Promise PDC20276
- From: "Dani Kadosh" <dkadosh@xxxxxxxxxxxxx>
- RE: ATA RAID Promise PDC20276
- From: <yoram@xxxxxxxxxxxx>
- Re: howto unzip bzip file
- From: john <john@xxxxxxxxxxx>
- Re: howto unzip bzip file
- From: Juraj <juraj@xxxxxxxxxxx>
- howto unzip bzip file
- From: Ivan Terziev <ivan@xxxxxxxxxxx>
- Re: ATA RAID Promise PDC20276
- From: Samuel Flory <sflory@xxxxxxxxxxxx>
- ATA RAID Promise PDC20276
- From: <yoram@xxxxxxxxxxxx>
- Re: Asus A7V133
- From: Murty Rompalli <murty@xxxxxxxxxxxxxxx>
- RE: RH7.3 and Promise 20265
- From: Murty Rompalli <murty@xxxxxxxxxxxxxxx>
- Re: Redhat 7.3, Promise 20267 chipset, Gigabyte Titan mobo for P4
- From: "Forge 1.3B" <forge@xxxxxxx>
- Re: Promise TX4 w/ SMP? (lost interrupt)
- From: "Forge 1.3B" <forge@xxxxxxx>
- Re: Lost interrupt with Fasttrak TX2
- From: Matt Oelfke <mysterial@xxxxxxxxxxx>
- Lost interrupt with Fasttrak TX2
- From: Matt Oelfke <mysterial@xxxxxxxxxxx>
- Re: Asus A7V133
- From: stefan.lange@xxxxxxxxxxxxx
- RE: RH7.3 and Promise 20265
- From: "Jens W. Skov" <jens@xxxxxxxxxxxx>
- RE: RH7.3 and Promise 20265
- From: "Jens W. Skov" <jens@xxxxxxxxxxxx>
- Re: Asus A7V133
- From: Murty Rompalli <murty@xxxxxxxxxxxxxxx>
- RE: RH7.3 and Promise 20265
- From: Murty Rompalli <murty@xxxxxxxxxxxxxxx>
- Re: Please a question to Mr. Rompalli
- From: Murty Rompalli <murty@xxxxxxxxxxxxxxx>
- Debian and Promise FastTrack RAID 1
- From: "Yann Lollivier" <ianlov@xxxxxxxxxxx>
- Debian and Promise FastTrack RAID 1
- From: "Yann Lollivier" <ianlov@xxxxxxxxxxx>
- Asus A7V133
- From: stefan.lange@xxxxxxxxxxxxx
- RE: RH7.3 and Promise 20265
- From: "Jens W. Skov" <jens@xxxxxxxxxxxx>
- RE: RH7.3 and Promise 20265
- From: "Jens W. Skov" <jens@xxxxxxxxxxxx>
- RE: Abit VP6
- From: "Martijn Olivier Tigchelaar" <martijnt@xxxxxxxxxxxx>
- Re: Abit VP6
- From: Richard Barrington <rich_b_nz@xxxxxxxxxxxx>
- Abit VP6
- From: "John F. Meinel Jr." <jfmeinel@xxxxxxxxxxxxxxxxxxxxxx>
- Please a question to Mr. Rompalli
- From: Jaime Vargas <jaimevarsaa@xxxxxxxxx>
- Re: Promise release drivers for RH 7.3
- From: Samuel Flory <sflory@xxxxxxxxxxxx>
- Re: Promise release drivers for RH 7.3
- From: Murty Rompalli <murty@xxxxxxxxxxxxxxx>
- Re: RH7.3 and Promise 20265
- From: Murty Rompalli <murty@xxxxxxxxxxxxxxx>
- Promise release drivers for RH 7.3
- From: Jaime Vargas <jaimevarsaa@xxxxxxxxx>
- Redhat 7.3, Promise 20267 chipset, Gigabyte Titan mobo for P4
- Re: anyone tried limbo2
- From: Samuel Flory <sflory@xxxxxxxxxxxx>
- anyone tried limbo2
- From: Samuel Flory <sflory@xxxxxxxxxxxx>
- suscrible
- From: "David Picard" <david.picard@xxxxxxxxxxx>
- Promise Raid Controller on Asus A7V 133
- From: stefan.lange@xxxxxxxxxxxxx
- RH7.3 and Promise 20265
- From: "Jens W. Skov" <jens@xxxxxxxxxxxx>
- Re: DMA!?
- From: Richard Barrington <rich_b_nz@xxxxxxxxxxxx>
- DMA!?
- From: Wunderlin Daniel <daniel.wunderlin@xxxxxxxxxx>
- Promise TX4 w/ SMP? (lost interrupt)
- From: Ben Low <ben@xxxxxxxxxxxxxxx>
- RE: HPT370 + Red Hat 7.3 howto (Martijn Olivier Tigchelaar)
- From: "Martijn Olivier Tigchelaar" <martijnt@xxxxxxxxxxxx>
- Raid support in gentoo distro?
- From: Jaime Vargas <jaimevarsaa@xxxxxxxxx>
- FastTrack66 on RH7.3
- From: "Marc Garon" <garonm@xxxxxxxxxx>
- RE: HPT370 + Red Hat 7.3 howto (Martijn Olivier Tigchelaar)
- From: b.hulsken@xxxxxxxxxxxxxx
- RE: HPT370 + Red Hat 7.3 howto (Martijn Olivier Tigchelaar)
- From: "Martijn Olivier Tigchelaar" <martijnt@xxxxxxxxxxxx>
- Re: HPT370 + Red Hat 7.3 howto (Martijn Olivier Tigchelaar)
- From: b.hulsken@xxxxxxxxxxxxxx
- HPT370 + Red Hat 7.3 howto
- From: "Martijn Olivier Tigchelaar" <martijnt@xxxxxxxxxxxx>
- Re: HPT 370 Problem
- From: Murty Rompalli <murty@xxxxxxxxxxxxxxx>
- RH7.3/Fasttrak 100 TX2 can't see raid array
- From: "Allan Høiberg" <allanh@xxxxxxxxxxxxx>
- ECS K7VTA3 3.1 confusion
- From: Andrew Kohlsmith <akohlsmith-ataraid@xxxxxxxxxxx>
- Re: new kernel out, with pdc
- From: David Gironella <giro@xxxxxxxxxxxx>
- ADV: Direct email blaster, email addresses extractor, maillist verify, maillist manager...........
- From: targetemailextractor@xxxxxxxxxxxxxx
- Re: new kernel out, with pdc
- From: Samuel Flory <sflory@xxxxxxxxxxxx>
- new kernel out, with pdc
- From: Richard Barrington <rich_b_nz@xxxxxxxxxxxx>
- Re: HPT 370 Problem
- From: "Jim Gifford" <maillist@xxxxxxxxx>
- Re: how to anticipate failing drive?
- From: Richard Barrington <rich_b_nz@xxxxxxxxxxxx>
- How to read RAID status
- From: Thomas Hansen <thomash@xxxxxxxxxx>
- how to anticipate failing drive?
- From: Jinn Koriech <lists@xxxxxxxxxxxxxx>
- Re: Installing Red Hat 7.3 on PDC20265R
- From: Richard Barrington <rich_b_nz@xxxxxxxxxxxx>
- Installing Red Hat 7.3 on PDC20265R
- From: Christian Nygaard <chris@xxxxxxxxxx>
- Re: HPT 370 Problem
- From: "Jim Gifford" <maillist@xxxxxxxxx>
- Re: HPT 370 Problem
- From: "Bryan Fredrick" <bryan.fredrick@xxxxxxxxxxxxxxx>
- Re: HPT 370 Problem
- From: "Jim Gifford" <maillist@xxxxxxxxx>
- Re: HPT 370 Problem
- From: "Jim Gifford" <maillist@xxxxxxxxx>
- ATA33 and ATA66/100 Cable - Heating drives...
- From: Sergio Rui Silva <sergio.rui@xxxxxxx>
- Re: HPT 370 Problem
- From: "Jim Gifford" <maillist@xxxxxxxxx>
- Re: HPT 370 Problem
- From: Thorsten Jungblut <tjungblu@xxxxxxxxxxxxxx>
- Re: HPT 370 Problem
- From: "Jim Gifford" <maillist@xxxxxxxxx>
- Re: HPT 370 Problem
- From: "Jim Gifford" <maillist@xxxxxxxxx>
- Re: HPT 370 Problem
- From: Thorsten Jungblut <tjungblu@xxxxxxxxxxxxxx>
- HPT 370 Problem - Updated
- From: "Jim Gifford" <jim@xxxxxxxxx>
- HPT 370 Problem
- From: "Jim Gifford" <maillist@xxxxxxxxx>
- Promise TX2000
- From: David Gironella <giro@xxxxxxxxxxxx>
- Re: lost interrupt problem - please help
- From: Martin Lillepuu <martin@xxxxxxxxxxxx>
- Re: lost interrupt problem - please help
- From: Rajesh Ghanekar <rajeshsg2002@xxxxxxxxx>
- Re: lost interrupt problem - please help
- From: Thorsten Jungblut <tjungblu@xxxxxxxxxxxxxx>
- lost interrupt problem - please help
- From: Rajesh Ghanekar <rajeshsg2002@xxxxxxxxx>
- Re: boot GRUB and running system GRUB disagree on Promise hda/hde hd0/hd1
- From: Jaroslav Stava <xstava1@xxxxxxxxxxxxxxxxxxx>
- SUSE 8 with a Promise TX2 Controller
- From: "TRemer" <tremer@xxxxxxxxxxxxxx>
- Re: driver for Promise PDC20276
- From: Martin Lillepuu <martin@xxxxxxxxxxxx>
- Re: driver for Promise PDC20276
- From: Richard Barrington <rich_b_nz@xxxxxxxxxxxx>
- hpt 370 with red hat 7.3
- From: "Radoslav Kirov" <kirov@xxxxxxx>
- Re: Help needed on HPT370/372 controller
- From: Rajesh Ghanekar <rajeshsg2002@xxxxxxxxx>
- Re: boot GRUB and running system GRUB disagree on Promise hda/hde hd0/hd1
- From: Samuel Flory <sflory@xxxxxxxxxxxx>
- boot GRUB and running system GRUB disagree on Promise hda/hde hd0/hd1
- From: idallen@xxxxxxxxxxxxxxxxxxx (Ian! D. Allen [NCFreeNet])
- HPT 372 Onboard RAID
- From: Walter Shawlee III <wshawlee3@xxxxxxx>
- Re: Help needed on HPT370/372 controller
- From: "Gu Mingming" <aigmm@xxxxxxx>
- Re: Ataraid-list digest, Vol 1 #245 - 2 msgs
- From: Demian Dixon <demian@xxxxxxxxxxxxxx>
- Re: Help needed on HPT370/372 controller
- From: Martin Lillepuu <martin@xxxxxxxxxxxx>
- Re: Help needed on HPT370/372 controller
- From: Thorsten Jungblut <tjungblu@xxxxxxxxxxxxxx>
- Help needed on HPT370/372 controller
- From: Rajesh Ghanekar <rajeshsg2002@xxxxxxxxx>
- Re: Experience with ATA Raid
- From: "Forge-2K-SP3" <forge@xxxxxxx>
- Re: Help moving root partition... raid problems
- From: "Shawn Evans" <shawnwe@xxxxxxxxxxx>
- Re: Help moving root partition... raid problems
- From: Thorsten Jungblut <tjungblu@xxxxxxxxxxxxxx>
- Help moving root partition... raid problems
- From: "Shawn Evans" <shawnwe@xxxxxxxxxxx>
- Re: AW: question about raid
- From: Thorsten Jungblut <tjungblu@xxxxxxxxxxxxxx>
- AW: question about raid
- From: "JOR. - Jordan, Roman" <JOR@xxxxxxxxxxxxxxx>
- hpt and raid1
- From: Norbert Preining <preining@xxxxxxxx>
- Disk Geometry issues (?) Raid/ultra100
- From: "Watterson, Jeff" <jeff.watterson@xxxxxxxxx>
- Re: driver for Promise PDC20276
- From: Samuel Flory <sflory@xxxxxxxxxxxx>
- Re: pdcraid & udma
- From: Chuck Wolber <chuckw@xxxxxxxxxxxxxxxxxxxxxxxx>
- question about raid
- From: "JOR. - Jordan, Roman" <JOR@xxxxxxxxxxxxxxx>
- driver for Promise PDC20276
- From: Tim Weldon <tim@xxxxxxxxxxxxxxxxxxxxx>
- Re: pdcraid & udma
- From: Martin Lillepuu <martin@xxxxxxxxxxxx>
- Re: pdcraid & udma
- From: Max Dubois <makemehappy@xxxxxxxxxxxxxx>
- Experience with ATA Raid
- From: Rui Lapa <ruilapa@xxxxxxxxxxx>
- pdcraid & udma
- From: Martin Lillepuu <martin@xxxxxxxxxxxx>
- Rh 7.3 Kernel version 2.4.18 with mbfasttrack133 raid ASUS A7V333 board
- From: "Jean-Robert Malzieux" <jean-robert.malzieux@xxxxxxxxxxx>
- Re: IDE RAID, htp370/372 help
- From: "Miroslav BENES" <mbenes@xxxxxxxx>
- Re: IDE RAID, htp370/372 help
- From: Thorsten Jungblut <tjungblu@xxxxxxxxxxxxxx>
- IDE RAID, htp370/372 help
- From: Benjamin Goodwin <benjamingoodwin@xxxxxxxxx>
- RAID 1 Support
- From: Thorsten Jungblut <tjungblu@xxxxxxxxxxxxxx>
- Re: mkraid
- From: Chuck Wolber <chuckw@xxxxxxxxxxxxxxxx>
- Re: mkraid
- From: "anil datta" <anil@xxxxxx>
- non OS RAID0
- From: "just jeff" <e_jeffw@xxxxxxxxxxx>
- mkraid
- From: "Bradley Jr., Roy E." <rbradley@xxxxxxxxxxx>
- Problems with RH7.3 and promise fasttrak
- From: "rogun noboda" <rogun64@xxxxxxxxxxx>
- Promise FastTrak Controller & RAID
- From: "Bradley Jr., Roy E." <rbradley@xxxxxxxxxxx>
- Re: Ideas for Installing RH 7.3 w/ Promise FastTrak
- From: Murty Rompalli <murty@xxxxxxxxxxxxxxx>
- Re: Ideas for Installing RH 7.3 w/ Promise FastTrak
- From: Samuel Flory <sflory@xxxxxxxxxxxx>
- Ideas for Installing RH 7.3 w/ Promise FastTrak
- From: Murty Rompalli <murty@xxxxxxxxxxxxxxx>
- Re: FastTrak133 support
- From: Murty Rompalli <murty@xxxxxxxxxxxxxxx>
- What the current situation with the Promise cupport in kernel?
- From: Dmitri Gofmekler <dmitri@xxxxxxxx>
- Re: FastTrak133 support
- From: Arjan van de Ven <arjanv@xxxxxxxxxx>
- Re: FastTrak133 support
- Re: FastTrak133 support
- From: Arjan van de Ven <arjanv@xxxxxxxxxx>
- Re: FastTrak133 support
- From: Julius Canonizado <juliuscan@xxxxxxxxxxxxx>
- FastTrak133 support
- Re: RH7.3, Fasttrak controller, and a lot of questions
- From: "Forge XP" <forge@xxxxxxx>
- RH7.3, Fasttrak controller, and a lot of questions
- From: "Emiliano Caramaschi" <emiliano@xxxxxxxxxxxx>
- Re: unable to re-read the partition table
- From: Samuel Flory <sflory@xxxxxxxxxxxx>
- Re: unable to re-read the partition table
- From: Murty Rompalli <murty@xxxxxxxxxxxxxxx>
- unable to re-read the partition table
- From: Samuel Flory <sflory@xxxxxxxxxxxx>
- re: how can I install rhl 7.3 on Promise FastTrack onboard IDE-RAID Controller with raid 1
- From: "tonga" <tnma@xxxxxxxxxx>
- Re: how can I install rhl 7.3 on Promise FastTrack onboard IDE-RAID Controller with raid 1
- From: Albert Dengg <a_d@xxxxxx>
- how can I install rhl 7.3 on Promise FastTrack onboard IDE-RAID Controller with raid 1
- From: "martin tontsch" <tonga1@xxxxxxxx>
- Re: NEWBIE: Installing FastTrak 100 TX2 module during a Kickstart
- From: Samuel Flory <sflory@xxxxxxxxxxxx>
- https://listman.redhat.com/pipermail/ataraid-list/2002-March/000640.html
- From: "Gil Gallo" <gilgallo@xxxxxxxx>
- Re: NEWBIE: Installing FastTrak 100 TX2 module during a Kickstart
- From: Murty Rompalli <murty@xxxxxxxxxxxxxxx>
- Re: NEWBIE: Installing FastTrak 100 TX2 module during a Kickstart
- From: Rebecca.R.Hepper@xxxxxxxxxxx
- Re: NEWBIE: Installing FastTrak 100 TX2 module during a Kickstart
- From: Hans-Peter Jansen <hpj@xxxxxxxxx>
- NEWBIE: Installing FastTrak 100 TX2 module during a Kickstart
- From: Rebecca.R.Hepper@xxxxxxxxxxx
- Re: RAID rookie tries to install Linux software RAID file server to replace Win2K
- From: Murty Rompalli <murty@xxxxxxxxxxxxxxx>
- RAID rookie tries to install Linux software RAID file server to replace Win2K
- From: "Mark Early" <lollyb@xxxxxxxxxxxxx>
- hdg: dma_intr: status=0x51 { DriveReady SeekComplete Error} & more funny messages :-(
- From: "Daniel Nolte" <nolte@xxxxxxxxxxx>
- Re: Problem mounting Promise Fasttrak66
- From: "rogun noboda" <rogun64@xxxxxxxxxxx>
- Re: Problem mounting Promise Fasttrak66
- From: Murty Rompalli <murty@xxxxxxxxxxxxxxx>
- Re: Problem mounting Promise Fasttrak66
- From: "rogun noboda" <rogun64@xxxxxxxxxxx>
- Re: Problem mounting Promise Fasttrak66
- From: "rogun noboda" <rogun64@xxxxxxxxxxx>
- Re: Note about HPT370 and drive geometry
- From: "Miroslav BENES" <mbenes@xxxxxxxx>
- Re: Problem mounting Promise Fasttrak66
- From: Murty Rompalli <murty@xxxxxxxxxxxxxxx>
- Problem mounting Promise Fasttrak66
- From: "rogun noboda" <rogun64@xxxxxxxxxxx>
- Note about HPT370 and drive geometry
- From: "Daryl Cantrell" <bustout@xxxxxxxxxxx>
- Re: a question on ide-scsi]
- From: "Forge XP" <forge@xxxxxxx>
- Re: FastTrack 100 & Raid1
- From: Murty Rompalli <murty@xxxxxxxxxxxxxxx>
- [Fwd: a question on ide-scsi]
- From: Victor Secarin <vsecarin@xxxxxxxxxxxxxxx>
- a question on ide-scsi
- From: Victor Secarin <vsecarin@xxxxxxxxxxxxxxx>
- Re: FastTrack 100 & Raid1
- From: Albert Dengg <a_d@xxxxxx>
- FastTrack 100 & Raid1
- Re: RHL 7.3 + pdc20267 + Micron netframe 1500
- From: Jack Neely <jjneely@xxxxxxxxxxxxx>
- Re: Fasttrack TX2000
- From: Juraj <juraj@xxxxxxxxxxx>
- Re: Fasttrack TX2000
- From: Murty Rompalli <murty@xxxxxxxxxxxxxxx>
- Fasttrack TX2000
- From: "Jimmy Spets" <Jimmy.spets@xxxxxxxxxx>
- Re: how do I controll the disks?
- From: Murty Rompalli <murty@xxxxxxxxxxxxxxx>
- Re: how do I controll the disks?
- From: "anil_tirola" <zweistein@xxxxxx>
- Re: RHL 7.3 + pdc20267 + Micron netframe 1500
- From: "Forge XP" <forge@xxxxxxx>
- RHL 7.3 + pdc20267 + Micron netframe 1500
- From: Jack Neely <slack@xxxxxxxxxxxxxxx>
- Re: how do I controll the disks?
- From: "Forge XP" <forge@xxxxxxx>
- how do I controll the disks?
- From: "anil_tirola" <zweistein@xxxxxx>
- Re: To Chris
- From: "rogun noboda" <rogun64@xxxxxxxxxxx>
- Re: To Chris
- From: "rogun noboda" <rogun64@xxxxxxxxxxx>
- Re: To Chris
- From: Chris Abbey <linux@xxxxxxxxxx>
- Re: To Chris
- From: Christopher Taylor <timrod@xxxxxxxxxxxxx>
- Re: To Chris
- From: "rogun noboda" <rogun64@xxxxxxxxxxx>
- Re: To Chris
- From: Murty Rompalli <murty@xxxxxxxxxxxxxxx>
- Re: To Chris
- From: "rogun noboda" <rogun64@xxxxxxxxxxx>
- Re: To Chris
- From: "rogun noboda" <rogun64@xxxxxxxxxxx>
- Re: To Chris
- From: Christopher Taylor <timNOrod@xxxxxxxxxxxxxxxxxx>
- To Chris
- From: "rogun noboda" <rogun64@xxxxxxxxxxx>
- To Chuck
- From: "rogun noboda" <rogun64@xxxxxxxxxxx>
[Index of Archives]
[Linux RAID]
[Linux IDE]
[Kernel]
[iSCSI]
[Linux Books]
