I have been trying to setup the HPT 370A controller on my system. I am using
Linux Source Codes only.
I have selected CONFIG_BLK_DEV_VIA82CXXX
CONFIG_BLK_DEV_HPT366
CONFIG_BLK_DEV_ATARAID_HPT
When I enable the ATARAID in my BIOS it locks up after it see's the my
IDE-ZIP connected to the secondary port of my VIA bus.
Here is my Drive setup
IDE1 = 40GB Drive Master
IDE2 = ZIP Slave
IDE3 = 120 GB Drive Master
IDE4 = 120 GB Drive Master
Thank you in advance for your help
