Hi
May be because too many devices are sharing same irq ? or your disk is
failing ?
On Wed, 4 Sep 2002, Maurice al-khaliedy wrote:
> Hi,
>
> can anyone give me a tip what happens .
>
> -------------------snip from dmesg------------------
> hdf: status error: status=0x58 { DriveReady SeekComplete DataRequest }
> hdf: drive not ready for command
> FastTrak : Drive Interrupt Time Out.(2)
> FastTrak : RESET Channel1 * DEV1(OK) DEV2(OK)
> -----------------------------------------------------
>
> The compleate dmesg...
>
> Linux version 2.4.18-3 (bhcompile@xxxxxxxxxxxxxxxxxxxxxx) (gcc version 2.96
> 20000731 (Red Hat Linux 7.3 2.96-110)) #1 Thu Apr 18 07:32:41 EDT 2002
> BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
> BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
> BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)
> BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
> On node 0 totalpages: 131056
> zone(0): 4096 pages.
> zone(1): 126960 pages.
> zone(2): 0 pages.
> Kernel command line: auto BOOT_IMAGE=linux ro root=802
> BOOT_FILE=/boot/vmlinuz-2.4.18-3 hda=ide-scsi
> ide_setup: hda=ide-scsi
> Local APIC disabled by BIOS -- reenabling.
> Found and enabled local APIC!
> Initializing CPU#0
> Detected 1535.251 MHz processor.
> Console: colour VGA+ 80x25
> Calibrating delay loop... 3060.53 BogoMIPS
> Memory: 513728k/524224k available (1125k kernel code, 10108k reserved, 802k
> data, 296k init, 0k highmem)
> Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
> Inode cache hash table entries: 32768 (order: 6, 262144 bytes)
> Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
> Buffer cache hash table entries: 32768 (order: 5, 131072 bytes)
> Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
> CPU: Before vendor init, caps: 0383fbff c1cbfbff 00000000, vendor = 2
> CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
> CPU: L2 Cache: 256K (64 bytes/line)
> CPU: After vendor init, caps: 0383fbff c1cbfbff 00000000 00000000
> Intel machine check architecture supported.
> Intel machine check reporting enabled on CPU#0.
> CPU: After generic, caps: 0383fbff c1cbfbff 00000000 00000000
> CPU: Common caps: 0383fbff c1cbfbff 00000000 00000000
> CPU: AMD Athlon(tm) XP 1800+ stepping 02
> Enabling fast FPU save and restore... done.
> Enabling unmasked SIMD FPU exception support... done.
> Checking 'hlt' instruction... OK.
> POSIX conformance testing by UNIFIX
> mtrr: v1.40 (20010327) Richard Gooch (rgooch@xxxxxxxxxxxxx)
> mtrr: detected mtrr type: Intel
> PCI: PCI BIOS revision 2.10 entry at 0xfb690, last bus=1
> PCI: Using configuration type 1
> PCI: Probing PCI hardware
> Unknown bridge resource 0: assuming transparent
> PCI: Using IRQ router VIA [1106/0686] at 00:07.0
> PCI: Disabling Via external APIC routing
> isapnp: Scanning for PnP cards...
> isapnp: No Plug & Play device found
> Linux NET4.0 for Linux 2.4
> Based upon Swansea University Computer Society NET3.039
> Initializing RT netlink socket
> apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16)
> Starting kswapd
> VFS: Diskquotas version dquot_6.5.0 initialized
> pty: 2048 Unix98 ptys configured
> Serial driver version 5.05c (2001-07-08) with MANY_PORTS MULTIPORT SHARE_IRQ
> SERIAL_PCI ISAPNP enabled
> ttyS00 at 0x03f8 (irq = 4) is a 16550A
> ttyS01 at 0x02f8 (irq = 3) is a 16550A
> PCI: Found IRQ 11 for device 00:09.0
> PCI: Sharing IRQ 11 with 00:09.1
> Real Time Clock Driver v1.10e
> block: 992 slots per queue, batch=248
> Uniform Multi-Platform E-IDE driver Revision: 6.31
> ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
> VP_IDE: IDE controller on PCI bus 00 dev 39
> VP_IDE: chipset revision 6
> VP_IDE: not 100% native mode: will probe irqs later
> VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on pci00:07.1
> ide0: BM-DMA at 0xa400-0xa407, BIOS settings: hda:DMA, hdb:pio
> ide1: BM-DMA at 0xa408-0xa40f, BIOS settings: hdc:DMA, hdd:pio
> PDC20270: IDE controller on PCI bus 00 dev 78
> PCI: Found IRQ 10 for device 00:0f.0
> PCI: Sharing IRQ 10 with 00:0d.0
> PDC20270: chipset revision 2
> PDC20270: not 100% native mode: will probe irqs later
> ide2: BM-DMA at 0xdc00-0xdc07, BIOS settings: hde:pio, hdf:pio
> ide3: BM-DMA at 0xdc08-0xdc0f, BIOS settings: hdg:pio, hdh:pio
> hda: PLEXTOR CD-R PX-W4012A, ATAPI CD/DVD-ROM drive
> hdc: TOSHIBA DVD-ROM SD-M1612, ATAPI CD/DVD-ROM drive
> hde: IC35L060AVVA07-0, ATA DISK drive
> hdf: IC35L060AVVA07-0, ATA DISK drive
> hdg: IC35L060AVVA07-0, ATA DISK drive
> hdh: IC35L060AVVA07-0, ATA DISK drive
> ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> ide1 at 0x170-0x177,0x376 on irq 15
> ide2 at 0xcc00-0xcc07,0xd002 on irq 10
> ide3 at 0xd400-0xd407,0xd802 on irq 10
> blk: queue c037494c, I/O limit 4095Mb (mask 0xffffffff)
> hde: 120103200 sectors (61493 MB) w/1863KiB Cache, CHS=119150/16/63,
> UDMA(100)
> blk: queue c0374a98, I/O limit 4095Mb (mask 0xffffffff)
> hdf: 120103200 sectors (61493 MB) w/1863KiB Cache, CHS=119150/16/63,
> UDMA(100)
> blk: queue c0374cb0, I/O limit 4095Mb (mask 0xffffffff)
> hdg: 120103200 sectors (61493 MB) w/1863KiB Cache, CHS=119150/16/63,
> UDMA(100)
> blk: queue c0374dfc, I/O limit 4095Mb (mask 0xffffffff)
> hdh: 120103200 sectors (61493 MB) w/1863KiB Cache, CHS=119150/16/63,
> UDMA(100)
> ide-floppy driver 0.99.newide
> Partition check:
> hde: [PTBL] [7476/255/63] hde1 hde2 hde3
> hdf: [PTBL] [7476/255/63] hdf1 hdf2 hdf3
> hdg: [PTBL] [7476/255/63] hdg1 hdg2
> hdh: [PTBL] [7476/255/63] hdh1 hdh2
> Floppy drive(s): fd0 is 1.44M
> FDC 0 is a post-1991 82077
> RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
> ide-floppy driver 0.99.newide
> md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
> md: Autodetecting RAID arrays.
> md: autorun ...
> md: ... autorun DONE.
> NET4: Linux TCP/IP 1.0 for NET4.0
> IP Protocols: ICMP, UDP, TCP, IGMP
> IP: routing cache hash table of 4096 buckets, 32Kbytes
> TCP: Hash tables configured (established 32768 bind 32768)
> Linux IP multicast router 0.06 plus PIM-SM
> NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
> RAMDISK: Compressed image found at block 0
> Freeing initrd memory: 290k freed
> VFS: Mounted root (ext2 filesystem).
> SCSI subsystem driver Revision: 1.00
> kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
> PCI: Found IRQ 11 for device 00:11.0
> PCI: Sharing IRQ 11 with 01:05.0
> scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.5
> <Adaptec 2940 Ultra SCSI adapter>
> aic7880: Ultra Wide Channel A, SCSI Id=7, 16/253 SCBs
>
> Vendor: HP Model: C1533A Rev: HP00
> Type: Sequential-Access ANSI SCSI revision: 02
> PROMISE FastTrak Series Linux Driver Version 1.02.0.22
> scsi1 : FastTrak
> Vendor: Promise Model: 1X2 Mirror/RAID1 Rev: 1.10
> Type: Direct-Access ANSI SCSI revision: 02
> Vendor: Promise Model: 1X2 Mirror/RAID1 Rev: 1.10
> Type: Direct-Access ANSI SCSI revision: 02
> Attached scsi disk sda at scsi1, channel 0, id 0, lun 0
> Attached scsi disk sdb at scsi1, channel 0, id 1, lun 0
> SCSI device sda: 120103137 512-byte hdwr sectors (61493 MB)
> sda: sda1 sda2 sda3
> SCSI device sdb: 120103137 512-byte hdwr sectors (61493 MB)
> sdb: sdb1 sdb2
> Journalled Block Device driver loaded
> kjournald starting. Commit interval 5 seconds
> EXT3-fs: mounted filesystem with ordered data mode.
> Freeing unused kernel memory: 296k freed
> Adding Swap: 530104k swap-space (priority -1)
> Adding Swap: 530104k swap-space (priority -2)
> Adding Swap: 530104k swap-space (priority -3)
> usb.c: registered new driver usbdevfs
> usb.c: registered new driver hub
> usb-uhci.c: $Revision: 1.275 $ time 07:48:41 Apr 18 2002
> usb-uhci.c: High bandwidth mode enabled
> PCI: Found IRQ 9 for device 00:07.2
> PCI: Sharing IRQ 9 with 00:07.3
> PCI: Sharing IRQ 9 with 00:08.0
> PCI: Sharing IRQ 9 with 00:0b.0
> PCI: Sharing IRQ 9 with 00:0b.1
> usb-uhci.c: USB UHCI at I/O 0xa800, IRQ 9
> usb-uhci.c: Detected 2 ports
> usb.c: new USB bus registered, assigned bus number 1
> hub.c: USB hub found
> hub.c: 2 ports detected
> PCI: Found IRQ 9 for device 00:07.3
> PCI: Sharing IRQ 9 with 00:07.2
> PCI: Sharing IRQ 9 with 00:08.0
> PCI: Sharing IRQ 9 with 00:0b.0
> PCI: Sharing IRQ 9 with 00:0b.1
> usb-uhci.c: USB UHCI at I/O 0xac00, IRQ 9
> usb-uhci.c: Detected 2 ports
> usb.c: new USB bus registered, assigned bus number 2
> hub.c: USB hub found
> hub.c: 2 ports detected
> usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
> EXT3 FS 2.4-0.9.17, 10 Jan 2002 on sd(8,2), internal journal
> kjournald starting. Commit interval 5 seconds
> EXT3 FS 2.4-0.9.17, 10 Jan 2002 on sd(8,1), internal journal
> EXT3-fs: mounted filesystem with ordered data mode.
> kjournald starting. Commit interval 5 seconds
> EXT3 FS 2.4-0.9.17, 10 Jan 2002 on sd(8,18), internal journal
> EXT3-fs: mounted filesystem with ordered data mode.
> kjournald starting. Commit interval 5 seconds
> EXT3 FS 2.4-0.9.17, 10 Jan 2002 on sd(8,3), internal journal
> EXT3-fs: mounted filesystem with ordered data mode.
> st: Version 20020205, bufsize 32768, wrt 30720, max init. bufs 4, s/g segs
> 16
> Attached scsi tape st0 at scsi0, channel 0, id 5, lun 0
> hdc: ATAPI 48X DVD-ROM drive, 512kB Cache, UDMA(33)
> Uniform CD-ROM driver Revision: 3.12
> scsi2 : SCSI host adapter emulation for IDE ATAPI devices
> Vendor: PLEXTOR Model: CD-R PX-W4012A Rev: 1.01
> Type: CD-ROM ANSI SCSI revision: 02
> hda: DMA disabled
> hdc: DMA disabled
> PCI: Found IRQ 9 for device 00:08.0
> PCI: Sharing IRQ 9 with 00:07.2
> PCI: Sharing IRQ 9 with 00:07.3
> PCI: Sharing IRQ 9 with 00:0b.0
> PCI: Sharing IRQ 9 with 00:0b.1
> 3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
> 00:08.0: 3Com PCI 3c905C Tornado at 0xb000. Vers LK1.1.16
> hdf: status error: status=0x58 { DriveReady SeekComplete DataRequest }
> hdf: drive not ready for command
> FastTrak : Drive Interrupt Time Out.(2)
> FastTrak : RESET Channel1 * DEV1(OK) DEV2(OK)
> es1371: version v0.30 time 07:48:13 Apr 18 2002
> PCI: Found IRQ 10 for device 00:0d.0
> PCI: Sharing IRQ 10 with 00:0f.0
> es1371: found chip, vendor id 0x1274 device id 0x1371 revision 0x08
> es1371: found es1371 rev 8 at io 0xc800 irq 10
> es1371: features: joystick 0x0
> ac97_codec: AC97 Audio codec, id: 0x8384:0x7609 (SigmaTel STAC9721/23)
> Attached scsi CD-ROM sr0 at scsi2, channel 0, id 0, lun 0
> sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
> cdrom: This disc doesn't have any tracks I recognize!
>
>
>
>
> Thanx
> Maurice
>
>
