Hi there.
Been googling and reading kernel lists and so on but does not seam to find
any good info about this.
Does anyone know if this works and if it does with what kernel?
i still get the same error during boot after makeing the kernel with
"config_pdc202xx_burst"
What i want it to use the cards as just an other IDE ata interface.
Regards
Ola
====DMESG=====
/dev/ide/host4/bus0/target1/lun0: p1
/dev/ide/host4/bus1/target0/lun0: p1
/dev/ide/host4/bus1/target1/lun0: p1
/dev/ide/host6/bus0/target0/lun0:hdm: timeout waiting for DMA
PDC202XX: Primary channel reset.
hdm: ide_dma_timeout: Lets do it again!stat = 0x50, dma_stat = 0x64
hdm: DMA disabled
hdn: DMA disabled
PDC202XX: Primary channel reset.
hdm: ide_set_handler: handler not null; old=c02055d0, new=c020b810
bug: kernel timer added twice at c020539b.
p1
/dev/ide/host6/bus0/target1/lun0: p1
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 439M
agpgart: no supported devices found.
[drm] Initialized tdfx 1.0.0 20010216 on minor 0
[drm] Initialized radeon 1.1.1 20010405 on minor 1
hdm: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hdm: dma_intr: error=0x84 { DriveStatusError BadCRC }
hdm: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hdm: dma_intr: error=0x84 { DriveStatusError BadCRC }
hdm: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hdm: dma_intr: error=0x84 { DriveStatusError BadCRC }
hdm: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hdm: dma_intr: error=0x84 { DriveStatusError BadCRC }
PDC202XX: Primary channel reset.
ide6: reset: success
============
