Re: HPT 370 Problem

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Thats why I disable,if not used, ACPI, APM and USB. ACPI and APM are
especially problems if using SMP kernel

On Sun, 14 Jul 2002, Jim Gifford wrote:

> I found out the problem is good ole ACPI. It interfer's with ataraid drive.
> I disabled ACPI and now it works. Do you have ACPI enabled???
> 
> ----- Original Message -----
> From: "Bryan Fredrick" <bryan.fredrick@xxxxxxxxxxxxxxx>
> To: <ataraid-list@xxxxxxxxxx>
> Sent: Sunday, July 14, 2002 2:41 PM
> Subject: Re: HPT 370 Problem
> 
> 
> > I had the same problem until I upgraded kernel to 2.4.19-r7.  I used
> Gentoo
> > Linux distribution, which D/L'ed the source from the 'net.
> > --Bryan Fredrick
> >
> > ----- Original Message -----
> > From: "Jim Gifford" <maillist@xxxxxxxxx>
> > To: <ataraid-list@xxxxxxxxxx>
> > Sent: Sunday, July 14, 2002 11:18 AM
> > Subject: Re: HPT 370 Problem
> >
> >
> > > I found someone else who is having the same problem. Take a look at this
> > > link.
> > >
> > > http://groups.yahoo.com/group/linux-kernel/message/313695
> > >
> > > ----- Original Message -----
> > > From: "Thorsten Jungblut" <tjungblu@xxxxxxxxxxxxxx>
> > > To: <ataraid-list@xxxxxxxxxx>
> > > Sent: Friday, July 12, 2002 11:13 PM
> > > Subject: Re: HPT 370 Problem
> > >
> > >
> > > > On Fri, 12 Jul 2002, Jim Gifford wrote:
> > > >
> > > > > No luck. I put them on IDE=3 Master/Slave it still locks up after
> > seeing
> > > > > hdd.
> > > >
> > > >
> > > > > > > IDE1 = 40GB Drive Master
> > > > > > > IDE2 = ZIP  Slave
> > > > > >
> > > > > > > IDE3 = 120 GB Drive Master
> > > > > > > IDE4 = 120 GB Drive Master
> > > >
> > > >
> > > > Oh, now i got this.. you have 4 ide channels.. sorry, i misunderstood
> > > > this, i thought you have four disks on two channels...
> > > > With 4 channels this should be absolut ok.
> > > >
> > > > Perhaps you should try to set the zip drive also to master.
> > > >
> > > > And you can try rebuilding your kernel with hpt370/372 support..
> > > >
> > > > Does it lock up if you dont connect anything to the hpt-controller?
> > > >
> > > > How big are these HD's ? The HPT370 is limited to 128 GB..
> > > >
> > > > Did you try upgrading the HPT's BIOS? (v2.2 or better)
> > > >
> > > > Viele Grüsse,
> > > > Thorsten
> > > >
> > > > --
> > > > Thorsten Jungblut
> > > > Universität Koblenz, Fachbereich Informatik
> > > >  http://www.netcorner.org/
> > > >
> > > >
> > > >
> > > > _______________________________________________
> > > > 
> > > > Ataraid-list@xxxxxxxxxx
> > > > https://listman.redhat.com/mailman/listinfo/ataraid-list
> > > >
> > > >
> > >
> > >
> > >
> > > _______________________________________________
> > > 
> > > Ataraid-list@xxxxxxxxxx
> > > https://listman.redhat.com/mailman/listinfo/ataraid-list
> >
> >
> >
> > _______________________________________________
> > 
> > Ataraid-list@xxxxxxxxxx
> > https://listman.redhat.com/mailman/listinfo/ataraid-list
> >
> >
> 
> 
> 
> _______________________________________________
> 
> Ataraid-list@xxxxxxxxxx
> https://listman.redhat.com/mailman/listinfo/ataraid-list
> 





[Index of Archives]     [Linux RAID]     [Linux Device Mapper]     [Linux IDE]     [Linux SCSI]     [Kernel]     [Linux Books]     [Linux Admin]     [GFS]     [RPM]     [Yosemite Campgrounds]     [AMD 64]

  Powered by Linux