--- "T. Ryan Halwachs" <halwachs@xxxxxxxxxxxxx> wrote: > Subject: [Fwd: 3 x PDC20267 (ultra100) + software > raid5 => kernel panic: > Attempted to kill init!] > From: "T. Ryan Halwachs" <halwachs@xxxxxxxxxxxxx> > To: thalwachs@xxxxxxxxx > Date: 24 Aug 2002 15:40:51 -0700 > > -----Forwarded Message----- > > > From: T. Ryan Halwachs <halwachs@xxxxxxxxxxxxx> > > To: kernel mailing list > <linux-kernel@xxxxxxxxxxxxxxx>, ataraid mailing list > <ataraid-list@xxxxxxxxxx> > > Subject: 3 x PDC20267 (ultra100) + software raid5 > => kernel panic: Attempted to kill init! > > Date: 24 Aug 2002 15:26:07 -0700 > > > > Hi all, > > hoping you can help me diagnose and correct some > problems I am having > > with 3 promise ultra100 cards I am trying to use > with 6 WD1200 drives to > > create an ide raid5 array. > > > > I posted this to the ataraid list originally. > > > https://listman.redhat.com/pipermail/ataraid-list/2002-August/001029.html > > > > since then, using 2.4.19-ac4 I was able to > successfully build a raid5 > > array on 5 disks attached to 3 Promise ultra100 > pci add-in cards > > (described in the original thread). I put some > files on the array and > > they passed md5check. > > I couldn't unmount the array. > > I couldn't raidstop it. > > When I restarted the machine, it intermittently > would not talk to the > > drive on the third card. > > > > dmesg from successful(ish) kernel: > > > > Linux version 2.4.19-ac4-loca (ryan@TRH-RH72) (gcc > version 2.96 20000731 (Red Hat Linux 7.1 2.96-98)) > #3 SMP Fri Aug 9 15:14:10 PDT 2002 > > BIOS-provided physical RAM map: > > BIOS-e820: 0000000000000000 - 000000000009e800 > (usable) > > BIOS-e820: 000000000009e800 - 00000000000a0000 > (reserved) > > BIOS-e820: 00000000000e7000 - 0000000000100000 > (reserved) > > BIOS-e820: 0000000000100000 - 0000000011ffdc00 > (usable) > > BIOS-e820: 0000000011ffdc00 - 0000000011fffc00 > (ACPI data) > > BIOS-e820: 0000000011fffc00 - 0000000012000000 > (ACPI NVS) > > BIOS-e820: 00000000fffe7000 - 0000000100000000 > (reserved) > > 287MB LOWMEM available. > > On node 0 totalpages: 73725 > > zone(0): 4096 pages. > > zone(1): 69629 pages. > > zone(2): 0 pages. > > Kernel command line: nousb noacpi ro > root=/dev/hda1 hdc=ide-scsi > > ide_setup: hdc=ide-scsi > > Local APIC disabled by BIOS -- reenabling. > > Found and enabled local APIC! > > Initializing CPU#0 > > Detected 399.068 MHz processor. > > Console: colour VGA+ 80x25 > > Calibrating delay loop... 796.26 BogoMIPS > > Memory: 288084k/294900k available (1476k kernel > code, 6424k reserved, 363k data, 284k init, 0k > highmem) > > Dentry cache hash table entries: 65536 (order: 7, > 524288 bytes) > > Inode cache hash table entries: 32768 (order: 6, > 262144 bytes) > > Mount cache hash table entries: 512 (order: 0, > 4096 bytes) > > ramfs: mounted with options: <defaults> > > ramfs: max_pages=36010 max_file_pages=0 > max_inodes=0 max_dentries=36010 > > Buffer cache hash table entries: 16384 (order: 4, > 65536 bytes) > > Page-cache hash table entries: 131072 (order: 7, > 524288 bytes) > > CPU: Before vendor init, caps: 0183fbff 00000000 > 00000000, vendor = 0 > > CPU: L1 I cache: 16K, L1 D cache: 16K > > CPU: L2 cache: 128K > > CPU: After vendor init, caps: 0183fbff 00000000 > 00000000 00000000 > > Intel machine check architecture supported. > > Intel machine check reporting enabled on CPU#0. > > CPU: After generic, caps: 0183fbff 00000000 > 00000000 00000000 > > CPU: Common caps: 0183fbff 00000000 > 00000000 00000000 > > Enabling fast FPU save and restore... done. > > Checking 'hlt' instruction... OK. > > POSIX conformance testing by UNIFIX > > CPU: Before vendor init, caps: 0183fbff 00000000 > 00000000, vendor = 0 > > CPU: L1 I cache: 16K, L1 D cache: 16K > > CPU: L2 cache: 128K > > CPU: After vendor init, caps: 0183fbff 00000000 > 00000000 00000000 > > Intel machine check reporting enabled on CPU#0. > > CPU: After generic, caps: 0183fbff 00000000 > 00000000 00000000 > > CPU: Common caps: 0183fbff 00000000 > 00000000 00000000 > > CPU0: Intel Celeron (Mendocino) stepping 00 > > per-CPU timeslice cutoff: 365.10 usecs. > > task migration cache decay timeout: 10 msecs. > > SMP motherboard not detected. > > enabled ExtINT on CPU#0 > > ESR value before enabling vector: 00000000 > > ESR value after enabling vector: 00000000 > > Using local APIC timer interrupts. > > calibrating APIC timer ... > > ..... CPU clock speed is 399.0458 MHz. > > ..... host bus clock speed is 66.5075 MHz. > > cpu: 0, clocks: 665075, slice: 332537 > > CPU0<T0:665072,T1:332528,D:7,S:332537,C:665075> > > migration_task 0 on cpu=0 > > PCI: Using configuration type 1 > > PCI: Probing PCI hardware > > Unknown bridge resource 0: assuming transparent > > Unknown bridge resource 2: assuming transparent > > PCI: Using IRQ router PIIX [8086/7110] at 00:07.0 > > Limiting direct PCI/PCI transfers. > > isapnp: Scanning for PnP cards... > > isapnp: No Plug & Play device found > > Linux NET4.0 for Linux 2.4 > > Based upon Swansea University Computer Society > NET3.039 > > Initializing RT netlink socket > > Starting kswapd > > Journalled Block Device driver loaded > > Installing knfsd (copyright (C) 1996 > okir@xxxxxxxxxxxx). > > NTFS driver v1.1.22 [Flags: R/O] > > pty: 256 Unix98 ptys configured > > Serial driver version 5.05c (2001-07-08) with > MANY_PORTS SHARE_IRQ SERIAL_PCI ISAPNP enabled > > block: 544 slots per queue, batch=136 > > Uniform Multi-Platform E-IDE driver Revision: 6.31 > > ide: Assuming 33MHz system bus speed for PIO > modes; override with idebus=xx > > PIIX4: IDE controller on PCI bus 00 dev 39 > > PIIX4: chipset revision 1 > > PIIX4: not 100% native mode: will probe irqs later > > ide0: BM-DMA at 0x14e0-0x14e7, BIOS settings: > hda:DMA, hdb:pio > > ide1: BM-DMA at 0x14e8-0x14ef, BIOS settings: > hdc:DMA, hdd:pio > > PDC20267: IDE controller on PCI bus 00 dev 68 > > PCI: Found IRQ 11 for device 00:0d.0 > > PCI: Sharing IRQ 11 with 00:11.0 > > PDC20267: chipset revision 2 > > PDC20267: not 100% native mode: will probe irqs > later > > PDC20267: (U)DMA Burst Bit ENABLED Primary PCI > Mode Secondary PCI Mode. > > ide2: BM-DMA at 0x1400-0x1407, BIOS settings: > hde:pio, hdf:pio > > ide3: BM-DMA at 0x1408-0x140f, BIOS settings: > hdg:pio, hdh:pio > > PDC20267: IDE controller on PCI bus 00 dev 78 > > PCI: Found IRQ 10 for device 00:0f.0 > > PDC20267: chipset revision 2 > > PDC20267: not 100% native mode: will probe irqs > later > > PDC20267: (U)DMA Burst Bit ENABLED Primary PCI > Mode Secondary PCI Mode. > > ide4: BM-DMA at 0x1440-0x1447, BIOS settings: > hdi:DMA, hdj:pio > > ide5: BM-DMA at 0x1448-0x144f, BIOS settings: > hdk:pio, hdl:pio > > PDC20267: IDE controller on PCI bus 00 dev 80 > > PCI: Found IRQ 9 for device 00:10.0 > > PCI: Sharing IRQ 9 with 00:07.2 > > PDC20267: chipset revision 2 > > PDC20267: not 100% native mode: will probe irqs > later > > PDC20267: (U)DMA Burst Bit DISABLED Primary PCI > Mode Secondary PCI Mode. > > PDC20267: FORCING BURST BIT 0x00 -> 0x01 ACTIVE > > ide6: BM-DMA at 0x1480-0x1487, BIOS settings: > hdm:pio, hdn:pio > > ide7: BM-DMA at 0x1488-0x148f, BIOS settings: > hdo:pio, hdp:pio > > hda: QUANTUM FIREBALL_TM3840A, ATA DISK drive > > hdc: RICOH CD-R/RW MP7040A, ATAPI CD/DVD-ROM drive > > hdf: WDC WD1200AB-00CBA1, ATA DISK drive > > hdh: WDC WD1200AB-00CBA1, ATA DISK drive > > hdj: WDC WD1200AB-00CBA1, ATA DISK drive > > hdl: WDC WD1200AB-00CBA1, ATA DISK drive > > hdm: WDC WD1200JB-75CRA0, ATA DISK drive > > hdp: WDC WD1200BB-00CAA0, ATA DISK drive > > ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 > > ide1 at 0x170-0x177,0x376 on irq 15 > > ide2 at 0x1800-0x1807,0x14f6 on irq 11 > > ide3 at 0x14f8-0x14ff,0x14f2 on irq 11 > > ide4 at 0x1818-0x181f,0x180e on irq 10 > > ide5 at 0x1810-0x1817,0x180a on irq 10 > > ide6 at 0x1830-0x1837,0x1826 on irq 9 > > ide7 at 0x1828-0x182f,0x1822 on irq 9 > > hda: task_no_data_intr: status=0x51 { DriveReady > SeekComplete Error } > > hda: task_no_data_intr: error=0x04 { > DriveStatusError } > > hda: 7539840 sectors (3860 MB) w/76KiB Cache, > CHS=935/128/63, DMA > > hdf: host protected area => 1 > > hdf: 234441648 sectors (120034 MB) w/2048KiB > Cache, CHS=232581/16/63, UDMA(100) > > hdh: host protected area => 1 > > hdh: 234441648 sectors (120034 MB) w/2048KiB > Cache, CHS=232581/16/63, UDMA(100) > > hdj: host protected area => 1 > > hdj: 234441648 sectors (120034 MB) w/2048KiB > Cache, CHS=232581/16/63, UDMA(100) > > hdl: host protected area => 1 > > hdl: 234441648 sectors (120034 MB) w/2048KiB > Cache, CHS=232581/16/63, UDMA(100) > > hdm: host protected area => 1 > > hdm: setmax LBA 234375120, native 234375000 > > hdm: 234375000 sectors (120000 MB) w/8192KiB > Cache, CHS=232514/16/63, UDMA(100) > > hdp: host protected area => 1 > > hdp: 234441648 sectors (120034 MB) w/2048KiB > Cache, CHS=232581/16/63, UDMA(100) > > Partition check: > > hda: [PTBL] [469/255/63] hda1 hda2 > > hdf: hdf1 > > hdh: hdh1 > > hdj: hdj1 > > hdl: hdl1 > > hdm: [PTBL] [14589/255/63] hdm1 > > hdp: [PTBL] [14593/255/63] hdp1 > > Floppy drive(s): fd0 is 1.44M > > FDC 0 is a post-1991 82077 > > 8139too Fast Ethernet driver 0.9.25 > > PCI: Found IRQ 11 for device 00:11.0 > > PCI: Sharing IRQ 11 with 00:0d.0 > > eth0: SMC1211TX EZCard 10/100 (RealTek RTL8139) at > 0x1000, 00:e0:29:46:7f:97, IRQ 11 > > eth0: Identified 8139 chip type 'RTL-8139A' > > Linux agpgart interface v0.99 (c) Jeff Hartmann > > agpgart: Maximum main memory to use for agp > memory: 232M > > agpgart: Detected Intel 440BX chipset > > agpgart: AGP aperture is 64M @ 0xf8000000 > > SCSI subsystem driver Revision: 1.00 > > md: linear personality registered as nr 1 > > md: raid0 personality registered as nr 2 > > md: raid1 personality registered as nr 3 > > md: raid5 personality registered as nr 4 > > raid5: measuring checksumming speed > > 8regs : 736.000 MB/sec > > 32regs : 346.000 MB/sec > > pII_mmx : 912.400 MB/sec > > p5_mmx : 950.800 MB/sec > > raid5: using function: p5_mmx (950.800 MB/sec) > > md: multipath personality registered as nr 7 > > md: md driver 0.90.0 MAX_MD_DEVS=256, > MD_SB_DISKS=27 > > md: Autodetecting RAID arrays. > > [events: 0000000c] > > [events: 0000000c] > > [events: 0000000c] > > [events: 00000004] > > md: autorun ... > > md: considering hdl1 ... > > md: adding hdl1 ... > > md: adding hdj1 ... > > md: adding hdh1 ... > > md: adding hdf1 ... > > md: created md0 > > md: bind<hdf1,1> > > md: bind<hdh1,2> > > md: bind<hdj1,3> > > md: bind<hdl1,4> > > md: running: <hdl1><hdj1><hdh1><hdf1> > > md: hdl1's event counter: 00000004 > > md: hdj1's event counter: 0000000c > > md: hdh1's event counter: 0000000c > > md: hdf1's event counter: 0000000c > > md: superblock update time inconsistency -- using > the most recent one > > md: freshest: hdj1 > > md: kicking non-fresh hdl1 from array! > > md: unbind<hdl1,3> > > md: export_rdev(hdl1) > > md0: max total readahead window set to 744k > > md0: 3 data-disks, max readahead per data-disk: > 248k > > raid5: device hdj1 operational as raid disk 2 > > raid5: device hdh1 operational as raid disk 1 > > raid5: device hdf1 operational as raid disk 0 > > raid5: md0, not all disks are operational -- > trying to recover array > > raid5: allocated 4339kB for md0 > > raid5: raid level 5 set md0 active with 3 out of 4 > devices, algorithm 2 > > RAID5 conf printout: > > --- rd:4 wd:3 fd:1 > > disk 0, s:0, o:1, n:0 rd:0 us:1 dev:hdf1 > > disk 1, s:0, o:1, n:1 rd:1 us:1 dev:hdh1 > > disk 2, s:0, o:1, n:2 rd:2 us:1 dev:hdj1 > > disk 3, s:0, o:0, n:3 rd:3 us:1 dev:[dev 00:00] > > RAID5 conf printout: > > --- rd:4 wd:3 fd:1 > > disk 0, s:0, o:1, n:0 rd:0 us:1 dev:hdf1 > > disk 1, s:0, o:1, n:1 rd:1 us:1 dev:hdh1 > > disk 2, s:0, o:1, n:2 rd:2 us:1 dev:hdj1 > > disk 3, s:0, o:0, n:3 rd:3 us:1 dev:[dev 00:00] > > md: updating md0 RAID superblock on device > > md: hdj1 [events: 0000000d]<6>(write) hdj1's sb > offset: 117220672 > > md: recovery thread got woken up ... > > md0: no spare disk to reconstruct array! -- > continuing in degraded mode > > md: recovery thread finished ... > > md: hdh1 [events: 0000000d]<6>(write) hdh1's sb > offset: 117220672 > > md: hdf1 [events: 0000000d]<6>(write) hdf1's sb > offset: 117220672 > > md: ... autorun DONE. > > LVM version 1.0.3(19/02/2002) > > NET4: Linux TCP/IP 1.0 for NET4.0 > > IP Protocols: ICMP, UDP, TCP, IGMP > > IP: routing cache hash table of 2048 buckets, > 16Kbytes > > TCP: Hash tables configured (established 32768 > bind 32768) > > NET4: Unix domain sockets 1.0/SMP for Linux > NET4.0. > > kjournald starting. Commit interval 5 seconds > > EXT3-fs: mounted filesystem with ordered data > mode. > > VFS: Mounted root (ext3 filesystem) readonly. > > Freeing unused kernel memory: 284k freed > > Adding Swap: 610460k swap-space (priority -1) > > raid5: switching cache buffer size, 4096 --> 1024 > > EXT3 FS 2.4-0.9.18, 14 May 2002 on ide0(3,1), > internal journal > > hdc: driver not present > > eth0: Setting 100mbps full-duplex based on > auto-negotiated partner ability 45e1. > > and the config: > > can't find it --oops. raid5 was in. Promise stuff > was in. > > > > many kernels/patches later... > > > > kernel 2.5.25 with 0 drives on 2nd card and 0 > drives on 3rd card > > 2 drives on PDC20267(#1) > > 0 drives on PDC20267(#2) > > 0 drives on PDC20267(#3) > > > > Linux version 2.5.25 (ryan@TRH-RH72) (gcc version > 2.96 20000731 (Red Hat > > Linux 7.1 2.96-98)) #1 SMP Sat Aug 24 02:03:03 PDT > 2002 > > Video mode to be used for restore is ffff > > BIOS-provided physical RAM map: > > BIOS-e820: 0000000000000000 - 000000000009e800 > (usable) > > BIOS-e820: 000000000009e800 - 00000000000a0000 > (reserved) > > BIOS-e820: 00000000000e7000 - 0000000000100000 > (reserved) > > BIOS-e820: 0000000000100000 - 0000000011ffdc00 > (usable) > > BIOS-e820: 0000000011ffdc00 - 0000000011fffc00 > (ACPI data) > > BIOS-e820: 0000000011fffc00 - 0000000012000000 > (ACPI NVS) > > BIOS-e820: 00000000fffe7000 - 0000000100000000 > (reserved) > > 287MB LOWMEM available. > > On node 0 totalpages: 73725 > > zone(0): 4096 pages. > > zone(1): 69629 pages. > > zone(2): 0 pages. > > Kernel command line: ro root=/dev/hda1 > > Local APIC disabled by BIOS -- reenabling. > > Found and enabled local APIC! > > Initializing CPU#0 > > Detected 399.111 MHz processor. > > Console: colour VGA+ 80x25 > > Calibrating delay loop... 784.38 BogoMIPS > > Memory: 289280k/294900k available (1411k kernel > code, 5228k reserved, > > 349k data, 272k init, 0k highmem) > > Dentry-cache hash table entries: 65536 (order: 7, > 524288 bytes) > > Inode-cache hash table entries: 32768 (order: 6, > 262144 bytes) > > Mount-cache hash table entries: 512 (order: 0, > 4096 bytes) > > CPU: Before vendor init, caps: 0183fbff 00000000 > 00000000, vendor = 0 > > CPU: L1 I cache: 16K, L1 D cache: 16K > > CPU: L2 cache: 128K > > CPU: After vendor init, caps: 0183fbff 00000000 > 00000000 00000000 > > Intel machine check architecture supported. > > Intel machine check reporting enabled on CPU#0. > > CPU: After generic, caps: 0183fbff 00000000 > 00000000 00000000 > > CPU: Common caps: 0183fbff 00000000 > 00000000 00000000 > > Enabling fast FPU save and restore... done. > > Checking 'hlt' instruction... OK. > > POSIX conformance testing by UNIFIX > > CPU: Before vendor init, caps: 0183fbff 00000000 > 00000000, vendor = 0 > > CPU: L1 I cache: 16K, L1 D cache: 16K > > CPU: L2 cache: 128K > > CPU: After vendor init, caps: 0183fbff 00000000 > 00000000 00000000 > > Intel machine check reporting enabled on CPU#0. > > CPU: After generic, caps: 0183fbff 00000000 > 00000000 00000000 > > CPU: Common caps: 0183fbff 00000000 > 00000000 00000000 > > CPU0: Intel Celeron (Mendocino) stepping 00 > > per-CPU timeslice cutoff: 365.10 usecs. > > task migration cache decay timeout: 1 msecs. > > SMP motherboard not detected. > > enabled ExtINT on CPU#0 > > ESR value before enabling vector: 00000000 > > ESR value after enabling vector: 00000000 > > Using local APIC timer interrupts. > > calibrating APIC timer ... > > ..... CPU clock speed is 398.0986 MHz. > > ..... host bus clock speed is 66.0497 MHz. > > cpu: 0, clocks: 66497, slice: 2015 > > CPU0<T0:66496,T1:64480,D:1,S:2015,C:66497> > > migration_task 0 on cpu=0 > > Linux NET4.0 for Linux 2.4 > > Based upon Swansea University Computer Society > NET3.039 > > Initializing RT netlink socket > > PCI: PCI BIOS revision 2.10 entry at 0xfd983, last > bus=1 > > PCI: Using configuration type 1 > > isapnp: Scanning for PnP cards... > > isapnp: No Plug & Play device found > > usb.c: registered new driver hub > > PCI: Probing PCI hardware > > PCI: Probing PCI hardware (bus 00) > > Unknown bridge resource 0: assuming transparent > > Unknown bridge resource 2: assuming transparent > > PCI: Using IRQ router PIIX [8086/7110] at 00:07.0 > > __iounmap: bad address d2800e96 > > __iounmap: bad address d2804b8c > > __iounmap: bad address d2802e96 > > Starting kswapd > > BIO: pool of 256 setup, 14Kb (56 bytes/bio) > > biovec: init pool 0, 1 entries, 12 bytes > > biovec: init pool 1, 4 entries, 48 bytes > > biovec: init pool 2, 16 entries, 192 bytes > > biovec: init pool 3, 64 entries, 768 bytes > > biovec: init pool 4, 128 entries, 1536 bytes > > biovec: init pool 5, 256 entries, 3072 bytes > > Journalled Block Device driver loaded > > Installing knfsd (copyright (C) 1996 > okir@xxxxxxxxxxxx). > > Limiting direct PCI/PCI transfers. > > pty: 256 Unix98 ptys configured > > Serial driver version 5.05c (2001-07-08) with > MANY_PORTS SHARE_IRQ > > SERIAL_PCI ISAPNP enabled > > lp: driver loaded but no devices found > > Linux agpgart interface v0.99 (c) Jeff Hartmann > > agpgart: Maximum main memory to use for agp > memory: 232M > > agpgart: Detected Intel 440BX chipset > > agpgart: AGP aperture is 64M @ 0xf8000000 > > [drm] Initialized tdfx 1.0.0 20010216 on minor 0 > > [drm] AGP 0.99 on Intel 440BX @ 0xf8000000 64MB > > [drm] Initialized radeon 1.3.1 20020611 on minor 1 > > block: 256 slots per queue, batch=32 > > Floppy drive(s): fd0 is 1.44M > > FDC 0 is a post-1991 82077 > > 8139too Fast Ethernet driver 0.9.25 > > PCI: Found IRQ 10 for device 00:11.0 > > PCI: Sharing IRQ 10 with 00:0d.0 > > eth0: SMC1211TX EZCard 10/100 (RealTek RTL8139) at > 0x1000, > > 00:e0:29:46:7f:97, IRQ 10 > > eth0: Identified 8139 chip type 'RTL-8139A' > > ATA/ATAPI device driver v7.0.0 > > ATA: PCI bus speed 33.3MHz > > ATA: Intel Corp. 82371AB PIIX4 IDE, PCI slot > 00:07.1 > > ATA: chipset rev.: 1 > > ATA: non-legacy mode: IRQ probe delayed > > PIIX: Intel Corp. 82371AB PIIX4 IDE UDMA33 > controller on pci00:07.1 > > ide0: BM-DMA at 0x14e0-0x14e7, BIOS settings: > hda:DMA, hdb:pio > > ide1: BM-DMA at 0x14e8-0x14ef, BIOS settings: > hdc:DMA, hdd:pio > > ATA: Promise Technology, Inc. 20267, PCI slot > 00:0d.0 > > PCI: Found IRQ 10 for device 00:0d.0 > > PCI: Sharing IRQ 10 with 00:11.0 > > ATA: chipset rev.: 2 > > ATA: non-legacy mode: IRQ probe delayed > > Promise Technology, Inc. 20267: device reseted. > > Promise Technology, Inc. 20267: (U)DMA BURST > enabled, primary PCI mode, > > secondary PCI mode. > > ide2: BM-DMA at 0x1400-0x1407, BIOS settings: > hde:DMA, hdf:pio > > ide3: BM-DMA at 0x1408-0x140f, BIOS settings: > hdg:DMA, hdh:pio > > ATA: Promise Technology, Inc. 20267 (#2), PCI slot > 00:0e.0 > > PCI: Found IRQ 7 for device 00:0e.0 > > ATA: chipset rev.: 2 > > ATA: non-legacy mode: IRQ probe delayed > > Promise Technology, Inc. 20267 (#2): device > reseted. > > Promise Technology, Inc. 20267 (#2): (U)DMA BURST > enabled, primary PCI > > mode, secondary PCI mode. > > ide4: BM-DMA at 0x1440-0x1447, BIOS settings: > hdi:pio, hdj:pio > > ide5: BM-DMA at 0x1448-0x144f, BIOS settings: > hdk:pio, hdl:pio > > ATA: Promise Technology, Inc. 20267 (#3), PCI slot > 00:0f.0 > > PCI: Found IRQ 5 for device 00:0f.0 > > ATA: chipset rev.: 2 > > ATA: non-legacy mode: IRQ probe delayed > > Promise Technology, Inc. 20267 (#3): device > reseted. > > Promise Technology, Inc. 20267 (#3): forcing > (U)DMA BURST. > > Promise Technology, Inc. 20267 (#3): (U)DMA BURST > disabled, primary PCI > > mode, secondary PCI mode. > > ide6: BM-DMA at 0x1480-0x1487, BIOS settings: > hdm:DMA, hdn:pio > > ide7: BM-DMA at 0x1488-0x148f, BIOS settings: > hdo:pio, hdp:pio > > hda: QUANTUM FIREBALL_TM3840A, DISK drive > > hdc: RICOH CD-R/RW MP7040A, ATAPI CD/DVD-ROM drive > > hde: WDC WD1200AB-00CBA1, DISK drive > > hdg: WDC WD1200AB-00CBA1, DISK drive > > ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 > > ide1 at 0x170-0x177,0x376 on irq 15 > > ide2 at 0x1800-0x1807,0x14f6 on irq 10 > > ide3 at 0x14f8-0x14ff,0x14f2 on irq 10 > > hda: 7539840 sectors w/76KiB Cache, > CHS=7480/16/63, DMA > > hda: [PTBL] [469/255/63] hda1 hda2 > > hde: 234441648 sectors w/2048KiB Cache, > CHS=232581/16/63, UDMA(100) > > hde: > > hdg: 234441648 sectors w/2048KiB Cache, > CHS=232581/16/63, UDMA(100) > > hdg: > > hdc: ATAPI 20X CD-ROM CD-R/RW drive, 2048kB Cache, > DMA > > Uniform CD-ROM driver Revision: 3.12 > > md: raid5 personality registered as nr 4 > > raid5: measuring checksumming speed > > 8regs : 728.000 MB/sec > > 32regs : 344.000 MB/sec > > pII_mmx : 920.000 MB/sec > > p5_mmx : 952.000 MB/sec > > raid5: using function: p5_mmx (952.000 MB/sec) > > md: md driver 0.90.0 MAX_MD_DEVS=256, > MD_SB_DISKS=27 > > md: Autodetecting RAID arrays. > > md: autorun ... > > md: ... autorun DONE. > > NET4: Linux TCP/IP 1.0 for NET4.0 > > IP Protocols: ICMP, UDP, TCP, IGMP > > IP: routing cache hash table of 2048 buckets, > 16Kbytes > > TCP: Hash tables configured (established 32768 > bind 32768) > > NET4: Unix domain sockets 1.0/SMP for Linux > NET4.0. > > kjournald starting. Commit interval 5 seconds > > EXT3-fs: mounted filesystem with ordered data > mode. > > VFS: Mounted root (ext3 filesystem) readonly. > > Freeing unused kernel memory: 272k freed > > Adding 610460k swap on /dev/hda2. Priority:-1 > extents:1 > > EXT3 FS 2.4-0.9.16, 02 Dec 2001 on ide0(3,1), > internal journal > > eth0: Setting 100mbps full-duplex based on > auto-negotiated partner > > ability 45e1. > > > > and the config: > > # > > # Automatically generated make config: don't edit > > # > > CONFIG_X86=y > > CONFIG_ISA=y > > # CONFIG_SBUS is not set > > CONFIG_UID16=y > > > > # > > # Code maturity level options > > # > > CONFIG_EXPERIMENTAL=y > > > > # > > # General setup > > # > > CONFIG_NET=y > > CONFIG_SYSVIPC=y > > # CONFIG_BSD_PROCESS_ACCT is not set > > CONFIG_SYSCTL=y > > > > # > > # Loadable module support > > # > > # CONFIG_MODULES is not set > > > > # > > # Processor type and features > > # > > # CONFIG_M386 is not set > > # CONFIG_M486 is not set > > # CONFIG_M586 is not set > > # CONFIG_M586TSC is not set > > # CONFIG_M586MMX is not set > > CONFIG_M686=y > > # CONFIG_MPENTIUMIII is not set > > # CONFIG_MPENTIUM4 is not set > > # CONFIG_MK6 is not set > > # CONFIG_MK7 is not set > > # CONFIG_MELAN is not set > > # CONFIG_MCRUSOE is not set > > # CONFIG_MWINCHIPC6 is not set > > # CONFIG_MWINCHIP2 is not set > > # CONFIG_MWINCHIP3D is not set > > # CONFIG_MCYRIXIII is not set > > CONFIG_X86_WP_WORKS_OK=y > > CONFIG_X86_INVLPG=y > > CONFIG_X86_CMPXCHG=y > > CONFIG_X86_XADD=y > > CONFIG_X86_BSWAP=y > > CONFIG_X86_POPAD_OK=y > > # CONFIG_RWSEM_GENERIC_SPINLOCK is not set > > CONFIG_RWSEM_XCHGADD_ALGORITHM=y > > CONFIG_X86_L1_CACHE_SHIFT=5 > > CONFIG_X86_TSC=y > > CONFIG_X86_GOOD_APIC=y > > CONFIG_X86_USE_PPRO_CHECKSUM=y > > CONFIG_X86_PPRO_FENCE=y > > CONFIG_SMP=y > > # CONFIG_PREEMPT is not set > > # CONFIG_MULTIQUAD is not set > > CONFIG_X86_MCE=y > > CONFIG_X86_MCE_NONFATAL=y > > # CONFIG_TOSHIBA is not set > > # CONFIG_I8K is not set > > # CONFIG_MICROCODE is not set > > # CONFIG_X86_MSR is not set > > # CONFIG_X86_CPUID is not set > > CONFIG_NOHIGHMEM=y > > # CONFIG_HIGHMEM4G is not set > > # CONFIG_HIGHMEM64G is not set > > # CONFIG_MATH_EMULATION is not set > > # CONFIG_MTRR is not set > > CONFIG_HAVE_DEC_LOCK=y > > > > # > > # Power management options (ACPI, APM) > > # > > > > # > > # ACPI Support > > # > > # CONFIG_ACPI is not set > > CONFIG_PM=y > > # CONFIG_APM is not set > > > > # > > # Bus options (PCI, PCMCIA, EISA, MCA, ISA) > > # > > CONFIG_X86_IO_APIC=y > > CONFIG_X86_LOCAL_APIC=y > > CONFIG_PCI=y > > # CONFIG_PCI_GOBIOS is not set > > # CONFIG_PCI_GODIRECT is not set > > CONFIG_PCI_GOANY=y > > CONFIG_PCI_BIOS=y > > CONFIG_PCI_DIRECT=y > > CONFIG_PCI_NAMES=y > > # CONFIG_EISA is not set > > # CONFIG_MCA is not set > > # CONFIG_HOTPLUG is not set > > # CONFIG_PCMCIA is not set > > # CONFIG_HOTPLUG_PCI is not set > > > > # > > # Executable file formats > > # > > CONFIG_KCORE_ELF=y > > # CONFIG_KCORE_AOUT is not set > > CONFIG_BINFMT_AOUT=y > > CONFIG_BINFMT_ELF=y > > CONFIG_BINFMT_MISC=y > > > > # > > # Memory Technology Devices (MTD) > > # > > # CONFIG_MTD is not set > > > > # > > # Parallel port support > > # > > CONFIG_PARPORT=y > > CONFIG_PARPORT_PC=y > > CONFIG_PARPORT_PC_CML1=y > > # CONFIG_PARPORT_SERIAL is not set > > # CONFIG_PARPORT_PC_FIFO is not set > > # CONFIG_PARPORT_PC_SUPERIO is not set > > # CONFIG_PARPORT_AMIGA is not set > > # CONFIG_PARPORT_MFC3 is not set > > # CONFIG_PARPORT_ATARI is not set > > # CONFIG_PARPORT_GSC is not set > > # CONFIG_PARPORT_SUNBPP is not set > > # CONFIG_PARPORT_OTHER is not set > > # CONFIG_PARPORT_1284 is not set > > > > # > > # Plug and Play configuration > > # > > CONFIG_PNP=y > > CONFIG_ISAPNP=y > > # CONFIG_PNPBIOS is not set > > > > # > > # Block devices > > # > > CONFIG_BLK_DEV_FD=y > > # CONFIG_BLK_DEV_XD is not set > > # CONFIG_PARIDE is not set > > # CONFIG_BLK_CPQ_DA is not set > > # CONFIG_BLK_CPQ_CISS_DA is not set > > # CONFIG_BLK_DEV_DAC960 is not set > > # CONFIG_BLK_DEV_UMEM is not set > > # CONFIG_BLK_DEV_LOOP is not set > > # CONFIG_BLK_DEV_NBD is not set > > # CONFIG_BLK_DEV_RAM is not set > > > > # > > # Multi-device support (RAID and LVM) > > # > > CONFIG_MD=y > > CONFIG_BLK_DEV_MD=y > > # CONFIG_MD_LINEAR is not set > > # CONFIG_MD_RAID0 is not set > > # CONFIG_MD_RAID1 is not set > > CONFIG_MD_RAID5=y > > # CONFIG_MD_MULTIPATH is not set > > # CONFIG_BLK_DEV_LVM is not set > > > > # > > # Networking options > > # > > CONFIG_PACKET=y > > # CONFIG_PACKET_MMAP is not set > > # CONFIG_NETLINK_DEV is not set > > # CONFIG_NETFILTER is not set > > # CONFIG_FILTER is not set > > CONFIG_UNIX=y > > CONFIG_INET=y > > CONFIG_IP_MULTICAST=y > > # CONFIG_IP_ADVANCED_ROUTER is not set > > CONFIG_IP_PNP=y > > CONFIG_IP_PNP_DHCP=y > > # CONFIG_IP_PNP_BOOTP is not set > > # CONFIG_IP_PNP_RARP is not set > > # CONFIG_NET_IPIP is not set > > # CONFIG_NET_IPGRE is not set > > # CONFIG_IP_MROUTE is not set > > # CONFIG_ARPD is not set > > # CONFIG_INET_ECN is not set > > # CONFIG_SYN_COOKIES is not set > > # CONFIG_IPV6 is not set > > # CONFIG_KHTTPD is not set > > # CONFIG_ATM is not set > > # CONFIG_VLAN_8021Q is not set > > > > # > > # > > # > > # CONFIG_IPX is not set > > # CONFIG_ATALK is not set > > > > # > > # Appletalk devices > > # > > # CONFIG_DECNET is not set > > # CONFIG_BRIDGE is not set > > # CONFIG_X25 is not set > > # CONFIG_LAPB is not set > > # CONFIG_LLC is not set > > # CONFIG_NET_DIVERT is not set > > # CONFIG_ECONET is not set > > # CONFIG_WAN_ROUTER is not set > > # CONFIG_NET_FASTROUTE is not set > > # CONFIG_NET_HW_FLOWCONTROL is not set > > > > # > > # QoS and/or fair queueing > > # > > # CONFIG_NET_SCHED is not set > > > > # > > # Telephony Support > > # > > # CONFIG_PHONE is not set > > > > # > > # ATA/IDE/MFM/RLL support > > # > > CONFIG_IDE=y > > > > # > > # ATA and ATAPI Block devices > > # > > CONFIG_BLK_DEV_IDE=y > > > > # > > # Please see Documentation/ide.txt for help/info > on IDE drives > > # > > # CONFIG_BLK_DEV_HD_IDE is not set > > # CONFIG_BLK_DEV_HD is not set > > CONFIG_BLK_DEV_IDEDISK=y > > CONFIG_IDEDISK_MULTI_MODE=y > > # CONFIG_IDEDISK_STROKE is not set > > CONFIG_BLK_DEV_IDECD=y > > # CONFIG_BLK_DEV_IDETAPE is not set > > # CONFIG_BLK_DEV_IDEFLOPPY is not set > > > > # > > # ATA host chip set support > > # > > CONFIG_BLK_DEV_CMD640=y > > # CONFIG_BLK_DEV_CMD640_ENHANCED is not set > > # CONFIG_BLK_DEV_ISAPNP is not set > > CONFIG_BLK_DEV_RZ1000=y > > > > # > > # PCI host chip set support > > # > > # CONFIG_BLK_DEV_OFFBOARD is not set > > CONFIG_IDEPCI_SHARE_IRQ=y > > CONFIG_BLK_DEV_IDEDMA_PCI=y > > CONFIG_IDEDMA_PCI_AUTO=y > > # CONFIG_IDEDMA_ONLYDISK is not set > > CONFIG_BLK_DEV_IDEDMA=y > > # CONFIG_BLK_DEV_IDE_TCQ is not set > > # CONFIG_IDEDMA_NEW_DRIVE_LISTINGS is not set > > # CONFIG_BLK_DEV_AEC62XX is not set > > # CONFIG_BLK_DEV_ALI15X3 is not set > > # CONFIG_BLK_DEV_AMD74XX is not set > > # CONFIG_BLK_DEV_CMD64X is not set > > # CONFIG_BLK_DEV_CY82C693 is not set > > # CONFIG_BLK_DEV_CS5530 is not set > > # CONFIG_BLK_DEV_HPT34X is not set > > # CONFIG_BLK_DEV_HPT366 is not set > > CONFIG_BLK_DEV_PIIX=y > > # CONFIG_BLK_DEV_NS87415 is not set > > # CONFIG_BLK_DEV_OPTI621 is not set > > CONFIG_BLK_DEV_PDC202XX=y > > CONFIG_PDC202XX_BURST=y > > # CONFIG_PDC202XX_FORCE is not set > > # CONFIG_BLK_DEV_SVWKS is not set > > # CONFIG_BLK_DEV_SIS5513 is not set > > # CONFIG_BLK_DEV_TRM290 is not set > > # CONFIG_BLK_DEV_VIA82CXXX is not set > > # CONFIG_BLK_DEV_SL82C105 is not set > > # CONFIG_IDE_CHIPSETS is not set > > # CONFIG_IDEDMA_IVB is not set > > CONFIG_ATAPI=y > > CONFIG_IDEDMA_AUTO=y > > # CONFIG_BLK_DEV_ATARAID is not set > > > > # > > # SCSI support > > # > > # CONFIG_SCSI is not set > > > > # > > # Fusion MPT device support > > # > > # CONFIG_FUSION_BOOT is not set > > # CONFIG_FUSION_ISENSE is not set > > # CONFIG_FUSION_CTL is not set > > # CONFIG_FUSION_LAN is not set > > > > # > > # IEEE 1394 (FireWire) support (EXPERIMENTAL) > > # > > # CONFIG_IEEE1394 is not set > > > > # > > # I2O device support > > # > > # CONFIG_I2O is not set > > > > # > > # Network device support > > # > > CONFIG_NETDEVICES=y > > > > # > > # ARCnet devices > > # > > # CONFIG_ARCNET is not set > > CONFIG_DUMMY=y > > # CONFIG_BONDING is not set > > # CONFIG_EQUALIZER is not set > > # CONFIG_TUN is not set > > # CONFIG_ETHERTAP is not set > > # CONFIG_NET_SB1000 is not set > > > > # > > # Ethernet (10 or 100Mbit) > > # > > CONFIG_NET_ETHERNET=y > > # CONFIG_HAPPYMEAL is not set > > # CONFIG_SUNGEM is not set > > # CONFIG_NET_VENDOR_3COM is not set > > # CONFIG_LANCE is not set > > # CONFIG_NET_VENDOR_SMC is not set > > # CONFIG_NET_VENDOR_RACAL is not set > > # CONFIG_AT1700 is not set > > # CONFIG_DEPCA is not set > > # CONFIG_HP100 is not set > > # CONFIG_NET_ISA is not set > > CONFIG_NET_PCI=y > > # CONFIG_PCNET32 is not set > > # CONFIG_ADAPTEC_STARFIRE is not set > > # CONFIG_AC3200 is not set > > # CONFIG_APRICOT is not set > > # CONFIG_CS89x0 is not set > > # CONFIG_DGRS is not set > > # CONFIG_EEPRO100 is not set > > CONFIG_E100=y > > # CONFIG_FEALNX is not set > > # CONFIG_NATSEMI is not set > > # CONFIG_NE2K_PCI is not set > > # CONFIG_8139CP is not set > > CONFIG_8139TOO=y > > CONFIG_8139TOO_PIO=y > > CONFIG_8139TOO_TUNE_TWISTER=y > > CONFIG_8139TOO_8129=y > > CONFIG_8139_NEW_RX_RESET=y > > # CONFIG_SIS900 is not set > > # CONFIG_EPIC100 is not set > > # CONFIG_SUNDANCE is not set > > # CONFIG_TLAN is not set > > # CONFIG_VIA_RHINE is not set > > # CONFIG_NET_POCKET is not set > > > > # > > # Ethernet (1000 Mbit) > > # > > # CONFIG_ACENIC is not set > > # CONFIG_DL2K is not set > > # CONFIG_E1000 is not set > > # CONFIG_NS83820 is not set > > # CONFIG_HAMACHI is not set > > # CONFIG_YELLOWFIN is not set > > # CONFIG_SK98LIN is not set > > # CONFIG_TIGON3 is not set > > # CONFIG_FDDI is not set > > # CONFIG_HIPPI is not set > > # CONFIG_PLIP is not set > > # CONFIG_PPP is not set > > # CONFIG_SLIP is not set > > > > # > > # Wireless LAN (non-hamradio) > > # > > # CONFIG_NET_RADIO is not set > > > > # > > # Token Ring devices > > # > > # CONFIG_TR is not set > > # CONFIG_NET_FC is not set > > # CONFIG_RCPCI is not set > > # CONFIG_SHAPER is not set > > > > # > > # Wan interfaces > > # > > # CONFIG_WAN is not set > > > > # > > # Tulip family network device support > > # > > # CONFIG_NET_TULIP is not set > > > > # > > # Amateur Radio support > > # > > # CONFIG_HAMRADIO is not set > > > > # > > # IrDA (infrared) support > > # > > # CONFIG_IRDA is not set > > > > # > > # ISDN subsystem > > # > > # CONFIG_ISDN_BOOL is not set > > > > # > > # Old CD-ROM drivers (not SCSI, not IDE) > > # > > # CONFIG_CD_NO_IDESCSI is not set > > > > # > > # Input device support > > # > > # CONFIG_INPUT is not set > > > > # > > # Userland interfaces > > # > > CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 > > CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 > > CONFIG_INPUT_TSDEV_SCREEN_X=240 > > CONFIG_INPUT_TSDEV_SCREEN_Y=320 > > > > # > > # Input I/O drivers > > # > > # CONFIG_GAMEPORT is not set > > CONFIG_SOUND_GAMEPORT=y > > # CONFIG_SERIO is not set > > CONFIG_I8042_REG_BASE=60 > > CONFIG_I8042_KBD_IRQ=1 > > CONFIG_I8042_AUX_IRQ=12 > > > > # > > # Input Device Drivers > > # > > > > # > > # Character devices > > # > > CONFIG_VT=y > > CONFIG_VT_CONSOLE=y > > CONFIG_SERIAL=y > > # CONFIG_SERIAL_CONSOLE is not set > > # CONFIG_SERIAL_EXTENDED is not set > > # CONFIG_SERIAL_NONSTANDARD is not set > > CONFIG_UNIX98_PTYS=y > > CONFIG_UNIX98_PTY_COUNT=256 > > CONFIG_PRINTER=y > > # CONFIG_LP_CONSOLE is not set > > # CONFIG_PPDEV is not set > > > > # > > # I2C support > > # > > # CONFIG_I2C is not set > > > > # > > # Mice > > # > > # CONFIG_BUSMOUSE is not set > > CONFIG_MOUSE=y > > CONFIG_PSMOUSE=y > > # CONFIG_82C710_MOUSE is not set > > # CONFIG_PC110_PAD is not set > > # CONFIG_QIC02_TAPE is not set > > > > # > > # Watchdog Cards > > # > > # CONFIG_WATCHDOG is not set > > # CONFIG_INTEL_RNG is not set > > # CONFIG_NVRAM is not set > > # CONFIG_RTC is not set > > # CONFIG_DTLK is not set > > # CONFIG_R3964 is not set > > # CONFIG_APPLICOM is not set > > # CONFIG_SONYPI is not set > > > > # > > # Ftape, the floppy tape device driver > > # > > # CONFIG_FTAPE is not set > > CONFIG_AGP=y > > CONFIG_AGP_INTEL=y > > CONFIG_AGP_I810=y > > CONFIG_AGP_VIA=y > > # CONFIG_AGP_AMD is not set > > CONFIG_AGP_SIS=y > > CONFIG_AGP_ALI=y > > # CONFIG_AGP_SWORKS is not set > > CONFIG_DRM=y > > CONFIG_DRM_TDFX=y > > # CONFIG_DRM_GAMMA is not set > > # CONFIG_DRM_R128 is not set > > CONFIG_DRM_RADEON=y > > # CONFIG_DRM_I810 is not set > > # CONFIG_DRM_I830 is not set > > # CONFIG_DRM_MGA is not set > > # CONFIG_MWAVE is not set > > > > # > > # Multimedia devices > > # > > # CONFIG_VIDEO_DEV is not set > > > > # > > # File systems > > # > > # CONFIG_QUOTA is not set > > # CONFIG_AUTOFS_FS is not set > > CONFIG_AUTOFS4_FS=y > > # CONFIG_REISERFS_FS is not set > > # CONFIG_ADFS_FS is not set > > # CONFIG_AFFS_FS is not set > > # CONFIG_HFS_FS is not set > > # CONFIG_BFS_FS is not set > > CONFIG_EXT3_FS=y > > CONFIG_JBD=y > > CONFIG_JBD_DEBUG=y > > # CONFIG_FAT_FS is not set > > # CONFIG_UMSDOS_FS is not set > > # CONFIG_EFS_FS is not set > > # CONFIG_CRAMFS is not set > > CONFIG_TMPFS=y > > CONFIG_RAMFS=y > > CONFIG_ISO9660_FS=y > > # CONFIG_JOLIET is not set > > # CONFIG_ZISOFS is not set > > # CONFIG_JFS_FS is not set > > # CONFIG_MINIX_FS is not set > > # CONFIG_VXFS_FS is not set > > # CONFIG_NTFS_FS is not set > > # CONFIG_HPFS_FS is not set > > CONFIG_PROC_FS=y > > # CONFIG_DEVFS_FS is not set > > CONFIG_DEVPTS_FS=y > > # CONFIG_QNX4FS_FS is not set > > # CONFIG_ROMFS_FS is not set > > CONFIG_EXT2_FS=y > > # CONFIG_SYSV_FS is not set > > # CONFIG_UDF_FS is not set > > # CONFIG_UFS_FS is not set > > > > # > > # Network File Systems > > # > > # CONFIG_CODA_FS is not set > > # CONFIG_INTERMEZZO_FS is not set > > CONFIG_NFS_FS=y > > # CONFIG_NFS_V3 is not set > > # CONFIG_ROOT_NFS is not set > > CONFIG_NFSD=y > > # CONFIG_NFSD_V3 is not set > > # CONFIG_NFSD_TCP is not set > > CONFIG_SUNRPC=y > > CONFIG_LOCKD=y > > CONFIG_EXPORTFS=y > > # CONFIG_SMB_FS is not set > > # CONFIG_NCP_FS is not set > > # CONFIG_ZISOFS_FS is not set > > > > # > > # Partition Types > > # > > # CONFIG_PARTITION_ADVANCED is not set > > CONFIG_MSDOS_PARTITION=y > > # CONFIG_SMB_NLS is not set > > # CONFIG_NLS is not set > > > > # > > # Console drivers > > # > > CONFIG_VGA_CONSOLE=y > > # CONFIG_VIDEO_SELECT is not set > > # CONFIG_MDA_CONSOLE is not set > > > > # > > # Frame-buffer support > > # > > # CONFIG_FB is not set > > > > # > > # Sound > > # > > # CONFIG_SOUND is not set > > > > # > > # USB support > > # > > CONFIG_USB=y > > # CONFIG_USB_DEBUG is not set > > > > # > > # Miscellaneous USB options > > # > > # CONFIG_USB_DEVICEFS is not set > > # CONFIG_USB_LONG_TIMEOUT is not set > > # CONFIG_USB_BANDWIDTH is not set > > # CONFIG_USB_DYNAMIC_MINORS is not set > > > > # > > # USB Host Controller Drivers > > # > > # CONFIG_USB_EHCI_HCD is not set > > # CONFIG_USB_OHCI_HCD is not set > > # CONFIG_USB_UHCI_HCD_ALT is not set > > > > # > > # USB Device Class drivers > > # > > # CONFIG_USB_BLUETOOTH_TTY is not set > > # CONFIG_USB_MIDI is not set > > # CONFIG_USB_ACM is not set > > # CONFIG_USB_PRINTER is not set > > > > # > > # SCSI support is needed for USB Storage > > # > > > > # > > # USB Human Interface Devices (HID) > > # > > # CONFIG_USB_HID is not set > > > > # > > # Input core support is needed for USB HID > input layer or HIDBP support > > # > > > > # > > # USB Imaging devices > > # > > # CONFIG_USB_MDC800 is not set > > # CONFIG_USB_SCANNER is not set > > > > # > > # USB Multimedia devices > > # > > # CONFIG_USB_DABUSB is not set > > > > # > > # Video4Linux support is needed for USB > Multimedia device support > > # > > > > # > > # USB Network adaptors > > # > > # CONFIG_USB_CATC is not set > > # CONFIG_USB_CDCETHER is not set > > # CONFIG_USB_KAWETH is not set > > # CONFIG_USB_PEGASUS is not set > > # CONFIG_USB_RTL8150 is not set > > # CONFIG_USB_USBNET is not set > > > > # > > # USB port drivers > > # > > # CONFIG_USB_USS720 is not set > > > > # > > # USB Serial Converter support > > # > > # CONFIG_USB_SERIAL is not set > > > > # > > # USB Miscellaneous drivers > > # > > # CONFIG_USB_TIGL is not set > > # CONFIG_USB_AUERSWALD is not set > > # CONFIG_USB_RIO500 is not set > > # CONFIG_USB_BRLVGER is not set > > > > # > > # Bluetooth support > > # > > # CONFIG_BLUEZ is not set > > > > # > > # Kernel hacking > > # > > # CONFIG_SOFTWARE_SUSPEND is not set > > # CONFIG_DEBUG_KERNEL is not set > > > > # > > # Library routines > > # > > # CONFIG_CRC32 is not set > > # CONFIG_ZLIB_INFLATE is not set > > # CONFIG_ZLIB_DEFLATE is not set > > > > kernel 2.5.25 with 2 drives on 2nd card: > > 2 drives on PDC20267(#1) > > 2 drives on PDC20267(#2) > > 0 drives on PDC20267(#3) > > > > booting gets to the raid stuff then dies: > > . > > . > > . > > md0 max total readahead window set to OK > > > > then panics: > > > > divide error: 0000 > > . > > . > > . > > Process swapper... > > . > > . > > . > > <0> kernel panic: Attempt to kill init! > > > > > > help, please. > > cheers, > > ryan > > > > > > > > > > > > > > > > - > > To unsubscribe from this list: send the line > "unsubscribe linux-kernel" in > > the body of a message to majordomo@xxxxxxxxxxxxxxx > > More majordomo info at > http://vger.kernel.org/majordomo-info.html > > Please read the FAQ at http://www.tux.org/lkml/ > > > > __________________________________________________ Do You Yahoo!? Yahoo! Finance - Get real-time stock quotes http://finance.yahoo.com
