Ühel kenal päeval (pühapäev, 1. september 2002 23:59) kirjutas Barton Hodges: > Hi everybody, > > I was finally successful in getting my Promise FastTrak TX2000 > (PDC20271) to work with Linux 2.4.19 on Redhat 7.3 and I thought > I'd pass along the secret :) > > I used the config file from the Redhat 2.4.18-3 source directory > (/usr/src/linux-2.4.18-3/configs/kernel-2.4.18-i686.config) and did > not make any modifications to it. ... > after running "make oldconfig" and doing the kernel compile > groove, I created a ramdisk: > > mkinitrd --preload ataraid --preload pdcraid \ > /boot/initrd-2.4.19.img 2.4.19 ... > Then based upon the controller information obtained from /proc/pci > and the instructions here http://www.murty.net/ataraid/existing.html > I created an "append" line: As side note, you don't need the initrd and bootloader append line if you compile ataraid and pdcraid modules statically into kernel. RAID array is automatically detected during boot. -- Martin Lillepuu, SuSE 8.0 + 2.4.19 / PDC20276 / 2x60G RAID1
