I found someone else who is having the same problem. Take a look at this link. http://groups.yahoo.com/group/linux-kernel/message/313695 ----- Original Message ----- From: "Thorsten Jungblut" <tjungblu@xxxxxxxxxxxxxx> To: <ataraid-list@xxxxxxxxxx> Sent: Friday, July 12, 2002 11:13 PM Subject: Re: HPT 370 Problem > On Fri, 12 Jul 2002, Jim Gifford wrote: > > > No luck. I put them on IDE=3 Master/Slave it still locks up after seeing > > hdd. > > > > > > IDE1 = 40GB Drive Master > > > > IDE2 = ZIP Slave > > > > > > > IDE3 = 120 GB Drive Master > > > > IDE4 = 120 GB Drive Master > > > Oh, now i got this.. you have 4 ide channels.. sorry, i misunderstood > this, i thought you have four disks on two channels... > With 4 channels this should be absolut ok. > > Perhaps you should try to set the zip drive also to master. > > And you can try rebuilding your kernel with hpt370/372 support.. > > Does it lock up if you dont connect anything to the hpt-controller? > > How big are these HD's ? The HPT370 is limited to 128 GB.. > > Did you try upgrading the HPT's BIOS? (v2.2 or better) > > Viele Grüsse, > Thorsten > > -- > Thorsten Jungblut > Universität Koblenz, Fachbereich Informatik > http://www.netcorner.org/ > > > > _______________________________________________ > > Ataraid-list@xxxxxxxxxx > https://listman.redhat.com/mailman/listinfo/ataraid-list > >
