On Wed, 3 Jul 2002, Rajesh Ghanekar wrote: > Hi All, > Can anyone plz give me the procedure on how to > install Redhat 7.2 on HPT370/372 controller from High > Point Technologies. It is a UDMA/ATA controller with 2 > - 40GB harddisks configured in RAID 1. If possible i > would also like to know what to expect from the > installation steps. Any url pointing to this is also > appreciated. Any help really appreciated. Thanks. As far as i know, RAID 1 is not supported by the ataraid/htpraid-driver. (Does anybody know more about this? I would like to help improving the driver but didnt get any answer yet) Try using the commercial driver. But the commercial driver is a module, so you will not be able to install to a raid1 device. Solution: install on one disk only and then create the raid1. But it might be a little tricky to boot from it, since the module must be loaded first and this will require mounting a device... Note: You should update the cards bios to version 2.x if not already present.. (before installation!) Viele Grüsse, Thorsten -- Thorsten Jungblut Universität Koblenz, Fachbereich Informatik http://www.netcorner.org/
