Folks, I'm trying to get RHL7.3 installed on a Micron NetFrame 1500 which uses a Promise FastTrak100 ataraid device. Its a pdc20267. I realize that anaconda doesn't support installing to ataraid but I can't get the modules to even recongize the arrays. (My boot disks are from 2.4.18-4BOOT. The ataraid bios is set up for two arrays, one disk per array.) So this prevents me from getting anything at all on the HDs. Syslogs from the install are here http://anduril.pams.ncsu.edu/~slack/pdc20267/syslog An lspic -vv is http://anduril.pams.ncsu.edu/~slack/pdc20267/lspci The directory also includes the modues and a "real" insmod. (Anaconda segfaults on loading ataraid.o) The error I can't get past is # ./insmod pdcraid.o pdcraid.o: init_module: No such device and its in the syslog too. All I want to do is get to the point I can write to the HDs and hopefully boot from them. Thanks, Jack Neely -- Jack Neely <slack@xxxxxxxxxxxxxxx> Linux Systems Administrator NC State University College of PAMS GPG Fingerprint: 1917 5AC1 E828 9337 7AA4 EA6B 213B 765F 3B6A 5B89