Linux Kernel Newbies

• Thread Index

• Re: Why we need a 'last' parameter to invoke the macro switch_to?
  • From: "Daniel Baluta" <daniel.baluta@xxxxxxxxx>
• Re: configuring the Kernel
  • From: Greg KH <greg@xxxxxxxxx>
• Re: how are you supposed to invoke "namespace.pl"?
  • From: "Peter Teoh" <htmldeveloper@xxxxxxxxx>
• configuring the Kernel
  • From: onnm <on2008nm@xxxxxxxxx>
• Why we need a 'last' parameter to invoke the macro switch_to?
  • From: ZelluX <zellux@xxxxxxxxx>
• Re: Working of CFS
  • From: "Sukanto Ghosh" <sukanto.cse.iitb@xxxxxxxxx>
• Re: Working of CFS
  • From: "Mulyadi Santosa" <mulyadi.santosa@xxxxxxxxx>
• Re: Passing kernel space data buffer where userspace is expected.
  • From: "Mulyadi Santosa" <mulyadi.santosa@xxxxxxxxx>
• Re: "unable to handle kernel NULL pointer dereference" while opening a device
  • From: "Mulyadi Santosa" <mulyadi.santosa@xxxxxxxxx>
• Re: "unable to handle kernel NULL pointer dereference" while opening a device
  • From: "Manish Katiyar" <mkatiyar@xxxxxxxxx>
• Re: Need help Regarding Project
  • From: "Kyle Spaans" <3lucid@xxxxxxxxx>
• Re: "unable to handle kernel NULL pointer dereference" while opening a device
  • From: "Mulyadi Santosa" <mulyadi.santosa@xxxxxxxxx>
• Re: Need help Regarding Project
  • From: "Mulyadi Santosa" <mulyadi.santosa@xxxxxxxxx>
• Need help Regarding Project
  • From: "Sri Ram K Vemulpali" <vsriramksh@xxxxxxxxx>
• Re: any reviews on "essential linux device drivers"?
  • From: Himanshu Chauhan <hs.chauhan@xxxxxxxxx>
• Sending absolute input event is not absolute. Why?
  • From: Peter Steinmeyer <net@xxxxxxxxxxxx>
• Re: "unable to handle kernel NULL pointer dereference" while opening a device
  • From: Venky K Shankar <vshankar0@xxxxxxxxx>
• "unable to handle kernel NULL pointer dereference" while opening a device
  • From: Venky K Shankar <vshankar0@xxxxxxxxx>
• puzzled about some invocations of __setup()
  • From: "Robert P. J. Day" <rpjday@xxxxxxxxxxxxxx>
• How to register a sysctl table on linux-2.6.25?
  • From: "Jovi Jia" <jovi.jia@xxxxxxxxx>
• Re: JFFS2 issues
  • From: David Woodhouse <dwmw2@xxxxxxxxxxxxx>
• Programming Local apic timer
  • From: "Bradley Hanna" <brahan.ml@xxxxxxxxx>
• Re: JFFS2 issues
  • From: "Nancy Isaac" <nancy.isaac@xxxxxxxxx>
• any reviews on "essential linux device drivers"?
  • From: "Robert P. J. Day" <rpjday@xxxxxxxxxxxxxx>
• Re: JFFS2 issues
  • From: David Woodhouse <dwmw2@xxxxxxxxxxxxx>
• Re: A question about switch_to macro
  • From: ZelluX <zellux@xxxxxxxxx>
• Re: JFFS2 issues
  • From: "Nancy Isaac" <nancy.isaac@xxxxxxxxx>
• Re: Process Runqueue Updating Clarification
  • From: "Mulyadi Santosa" <mulyadi.santosa@xxxxxxxxx>
• Re: A question about switch_to macro
  • From: Johannes Weiner <hannes@xxxxxxxxxxxx>
• A question about switch_to macro
  • From: ZelluX <zellux@xxxxxxxxx>
• Pl080 DMA controller
  • From: "Kalpesh Rathod" <kalpeshb.rathod@xxxxxxxxxxxxxxxx>
• Re: request_firmware on-fly
  • From: "Belisko Marek" <marek.belisko@xxxxxxxxx>
• Re: request_firmware on-fly
  • From: Scott Lovenberg <scott.lovenberg@xxxxxxxxx>
• Re: request_firmware on-fly
  • From: "Belisko Marek" <marek.belisko@xxxxxxxxx>
• Re: request_firmware on-fly
  • From: Scott Lovenberg <scott.lovenberg@xxxxxxxxx>
• Passing kernel space data buffer where userspace is expected.
  • From: "Prasad Joshi" <prasadjoshi124@xxxxxxxxx>
• how are you supposed to invoke "namespace.pl"?
  • From: "Robert P. J. Day" <rpjday@xxxxxxxxxxxxxx>
• Re: what is "unpack_to_rootfs()" unpacking, and where is it putting it?
  • From: "Robert P. J. Day" <rpjday@xxxxxxxxxxxxxx>
• Re: request_firmware on-fly
  • From: Rene Herman <rene.herman@xxxxxxxxxxxx>
• Re: request_firmware on-fly
  • From: "Belisko Marek" <marek.belisko@xxxxxxxxx>
• Re: request_firmware on-fly
  • From: Rene Herman <rene.herman@xxxxxxxxxxxx>
• Re: Who decides PCI device number?
  • From: Rene Herman <rene.herman@xxxxxxxxxxxx>
• Re: Why both macro definitions and struct declarations are included in sched.c?
  • From: "Daniel Baluta" <daniel.baluta@xxxxxxxxx>
• Why both macro definitions and struct declarations are included in sched.c?
  • From: ZelluX <zellux@xxxxxxxxx>
• request_firmware on-fly
  • From: "Belisko Marek" <marek.belisko@xxxxxxxxx>
• Re: JFFS2 issues
  • From: David Woodhouse <dwmw2@xxxxxxxxxxxxx>
• Re: JFFS2 issues
  • From: Hinko Kocevar <hinko.kocevar@xxxxxxxxxxxx>
• Re: what is "unpack_to_rootfs()" unpacking, and where is it putting it?
  • From: Thomas Petazzoni <thomas.petazzoni@xxxxxxxxxxxxxxxxxx>
• Re: JFFS2 issues
  • From: Thomas Petazzoni <thomas.petazzoni@xxxxxxxxxxxxxxxxxx>
• Who decides PCI device number?
  • From: "Rajat Jain" <Rajat.Jain@xxxxxxxxxxxx>
• JFFS2 issues
  • From: "Nancy Isaac" <nancy.isaac@xxxxxxxxx>
• Process Runqueue Updating Clarification
  • From: "Bradley Hanna" <brahan.ml@xxxxxxxxx>
• Re: What is a sleeping spin locks?
  • From: Rene Herman <rene.herman@xxxxxxxxxxxx>
• what is "unpack_to_rootfs()" unpacking, and where is it putting it?
  • From: "Robert P. J. Day" <rpjday@xxxxxxxxxxxxxx>
• Re: What is a sleeping spin locks?
  • From: Rene Herman <rene.herman@xxxxxxxxxxxx>
• separating initrd from initramfs: part 2
  • From: "Robert P. J. Day" <rpjday@xxxxxxxxxxxxxx>
• Re: Trying to free already-free IRQ
  • From: Johannes Weiner <hannes@xxxxxxxxxxxx>
• Re: File descriptor
  • From: "Сергей -" <sergeykleymenov@xxxxxxxxx>
• Linux Virtual Memory Manager and Boxed floating point numbers.
  • From: "amit regmi" <regmi.amit@xxxxxxxxx>
• Re: File descriptor
  • From: "Сергей -" <sergeykleymenov@xxxxxxxxx>
• Re: What is a sleeping spin locks?
  • From: "Peter Teoh" <htmldeveloper@xxxxxxxxx>
• Re: File descriptor
  • From: Christian Boon <chris.boon@xxxxxxxxx>
• File descriptor
  • From: "Сергей -" <sergeykleymenov@xxxxxxxxx>
• Re: separating initrd from initramfs: part 1
  • From: "Robert P. J. Day" <rpjday@xxxxxxxxxxxxxx>
• Re: separating initrd from initramfs: part 1
  • From: Matthias Kaehlcke <matthias@xxxxxxxxxxxx>
• Re: separating initrd from initramfs: part 1
  • From: "Mitul Modi" <mituld.modi@xxxxxxxxx>
• Re: separating initrd from initramfs: part 1
  • From: Matthias Kaehlcke <matthias@xxxxxxxxxxxx>
• Re: separating initrd from initramfs: part 1
  • From: "Robert P. J. Day" <rpjday@xxxxxxxxxxxxxx>
• Re: What is a sleeping spin locks?
  • From: Thomas Petazzoni <thomas.petazzoni@xxxxxxxxxxxxxxxxxx>
• Trying to free already-free IRQ
  • From: "Belisko Marek" <marek.belisko@xxxxxxxxx>
• Re: Getting the list of the file systems which are mounted.
  • From: "Prasad Joshi" <prasadjoshi124@xxxxxxxxx>
• Re: separating initrd from initramfs: part 1
  • From: Matthias Kaehlcke <matthias@xxxxxxxxxxxx>
• Re: Getting the list of the file systems which are mounted.
  • From: Rene Herman <rene.herman@xxxxxxxxxxxx>
• Re: Getting the list of the file systems which are mounted.
  • From: "Prasad Joshi" <prasadjoshi124@xxxxxxxxx>
• Re: Getting the list of the file systems which are mounted.
  • From: Mark Brown <markb@xxxxxxxxxxxxxxxxxxxxx>
• separating initrd from initramfs: part 1
  • From: "Robert P. J. Day" <rpjday@xxxxxxxxxxxxxx>
• Re: What is a sleeping spin locks?
  • From: Rene Herman <rene.herman@xxxxxxxxxxxx>
• Re: newbie POSIX MQUEUE questions
  • From: Michael Kerrisk <mtk.lists@xxxxxxxxx>
• newbie POSIX MQUEUE questions
  • From: "Robert P. J. Day" <rpjday@xxxxxxxxxxxxxx>
• What is a sleeping spin locks?
  • From: "Peter Teoh" <htmldeveloper@xxxxxxxxx>
• Re: Getting the list of the file systems which are mounted.
  • From: Rene Herman <rene.herman@xxxxxxxxxxxx>
• Re: Getting the list of the file systems which are mounted.
  • From: Rene Herman <rene.herman@xxxxxxxxxxxx>
• Re: Getting the list of the file systems which are mounted.
  • From: "Prasad Joshi" <prasadjoshi124@xxxxxxxxx>
• Re: Getting the list of the file systems which are mounted.
  • From: "Prasad Joshi" <prasadjoshi124@xxxxxxxxx>
• Re: Getting the list of the file systems which are mounted.
  • From: Mark Brown <markb@xxxxxxxxxxxxxxxxxxxxx>
• Working of CFS
  • From: "Sukanto Ghosh" <sukanto.cse.iitb@xxxxxxxxx>
• Re: Getting the list of the file systems which are mounted.
  • From: Rene Herman <rene.herman@xxxxxxxxxxxx>
• Re: Basic C question
  • From: Rene Herman <rene.herman@xxxxxxxxxxxx>
• Re: Basic C question
  • From: Rene Herman <rene.herman@xxxxxxxxxxxx>
• Getting the list of the file systems which are mounted.
  • From: "Prasad Joshi" <prasadjoshi124@xxxxxxxxx>
• Re: Basic C question
  • From: "rahul p" <rahulpyd@xxxxxxxxx>
• Re: Basic C question
  • From: Rene Herman <rene.herman@xxxxxxxxxxxx>
• Re: Basic C question
  • From: "Manish Katiyar" <mkatiyar@xxxxxxxxx>
• Re: Basic C question
  • From: "Manish Katiyar" <mkatiyar@xxxxxxxxx>
• Re: Basic C question
  • From: Rene Herman <rene.herman@xxxxxxxxxxxx>
• Re: Basic C question
  • From: "rahul p" <rahulpyd@xxxxxxxxx>
• Re: Basic C question
  • From: "Daniel Baluta" <daniel.baluta@xxxxxxxxx>
• Basic C question
  • From: "Manish Katiyar" <mkatiyar@xxxxxxxxx>
• Re: USB hardisk support in Linux 2.6.24-14 kernel???
  • From: Henrik Austad <henrikau@xxxxxxxxxxxxxx>
• Re: "Unknown symbol in module" Question in 2.6.26
  • From: Asim <linkasim@xxxxxxxxx>
• USB hardisk support in Linux 2.6.24-14 kernel???
  • From: "Chetan Nanda" <chetannanda@xxxxxxxxx>
• Re: bug in kernel
  • From: "Mulyadi Santosa" <mulyadi.santosa@xxxxxxxxx>
• Re: which context is this code in
  • From: "Mulyadi Santosa" <mulyadi.santosa@xxxxxxxxx>
• Re: "Unknown symbol in module" Question in 2.6.26
  • From: Asim <linkasim@xxxxxxxxx>
• Re: "Unknown symbol in module" Question in 2.6.26
  • From: fisherman <ipconfigme@xxxxxxxxx>
• which context is this code in
  • From: "c.j" <c.james.cj@xxxxxxxxx>
• Re: "Unknown symbol in module" Question in 2.6.26
  • From: fisherman <ipconfigme@xxxxxxxxx>
• "Unknown symbol in module" Question in 2.6.26
  • From: fisherman <ipconfigme@xxxxxxxxx>
• Re: "Unknown symbol in module" Question in 2.6.26
  • From: fisherman <ipconfigme@xxxxxxxxx>
• Re: Module sections Query
  • From: "Peter Teoh" <htmldeveloper@xxxxxxxxx>
• Re: memory hotplug and pgdat removal
  • From: "Peter Teoh" <htmldeveloper@xxxxxxxxx>
• Re: Module sections Query
  • From: "Sandeep K Sinha" <sandeepksinha@xxxxxxxxx>
• Re: Module sections Query
  • From: Asim <linkasim@xxxxxxxxx>
• Re: Module sections Query
  • From: "Sandeep K Sinha" <sandeepksinha@xxxxxxxxx>
• Module sections Query
  • From: Asim <linkasim@xxxxxxxxx>
• Re: memory hotplug and pgdat removal
  • From: Johannes Weiner <hannes@xxxxxxxxxxxx>
• memory hotplug and pgdat removal
  • From: Peter Teoh <htmldeveloper@xxxxxxxxx>
• Re: How does __do_clear_user() works?
  • From: "Peter Teoh" <htmldeveloper@xxxxxxxxx>
• Re: How does __do_clear_user() works?
  • From: Rene Herman <rene.herman@xxxxxxxxxxxx>
• Re: How does __do_clear_user() works?
  • From: "Rafael C. de Almeida" <almeidaraf@xxxxxxxxx>
• Re: How does __do_clear_user() works?
  • From: Henrik Austad <henrikau@xxxxxxxxxxxxxx>
• How does __do_clear_user() works?
  • From: "Prasad Joshi" <prasadjoshi124@xxxxxxxxx>
• Re: creating /dev/console
  • From: Hinko Kocevar <hinko.kocevar@xxxxxxxxxxxx>
• Re: PCI DMA and security
  • From: "Sukanto Ghosh" <sukanto.cse.iitb@xxxxxxxxx>
• Re: PCI DMA and security
  • From: Michael Blizek <michi1@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: PCI DMA and security
  • From: Rene Herman <rene.herman@xxxxxxxxxxxx>
• Re: perfmon2 Installation error
  • From: "Peter Teoh" <htmldeveloper@xxxxxxxxx>
• Re: perfmon2 Installation error
  • From: "Peter Teoh" <htmldeveloper@xxxxxxxxx>
• Re: ext2_find_near
  • From: Rene Herman <rene.herman@xxxxxxxxxxxx>
• Re: bug in kernel
  • From: Thomas Petazzoni <thomas.petazzoni@xxxxxxxxxxxxxxxxxx>
• Re: ext2_find_near
  • From: Thomas Petazzoni <thomas.petazzoni@xxxxxxxxxxxxxxxxxx>
• Re: perfmon2 Installation error
  • From: Thomas Petazzoni <thomas.petazzoni@xxxxxxxxxxxxxxxxxx>
• Re: creating /dev/console
  • From: Thomas Petazzoni <thomas.petazzoni@xxxxxxxxxxxxxxxxxx>
• Re: PCI DMA and security
  • From: Thomas Petazzoni <thomas.petazzoni@xxxxxxxxxxxxxxxxxx>
• Re: creating /dev/console
  • From: Hinko Kocevar <hinko.kocevar@xxxxxxxxxxxx>
• Re: creating /dev/console
  • From: "Thomas De Schampheleire" <patrickdepinguin@xxxxxxxxx>
• creating /dev/console
  • From: Hinko Kocevar <hinko.kocevar@xxxxxxxxxxxx>
• Re: bug in kernel
  • From: Zaphod <zaphod001@xxxxxxxxx>
• Re: bug in kernel
  • From: "Frédéric Weisbecker" <f.weisbecker@xxxxxxxxx>
• Re: ext2_find_near
  • From: Rene Herman <rene.herman@xxxxxxxxxxxx>
• Re: PCI DMA and security
  • From: Rene Herman <rene.herman@xxxxxxxxxxxx>
• Re: PCI DMA and security
  • From: "Sukanto Ghosh" <sukanto.cse.iitb@xxxxxxxxx>
• bug in kernel
  • From: Gery <zaphod001@xxxxxxxxx>
• Re: ext2_find_near
  • From: Scott Lovenberg <scott.lovenberg@xxxxxxxxx>
• Re: PCI DMA and security
  • From: Greg KH <greg@xxxxxxxxx>
• PCI DMA and security
  • From: "Sukanto Ghosh" <sukanto.cse.iitb@xxxxxxxxx>
• Re: How to fix warning 'control reaches end of non-void function'
  • From: walter harms <wharms@xxxxxx>
• Re: Bitwise operations in Linux Kernel
  • From: "Sharwan Joram" <sharwan.joram@xxxxxxxxx>
• Re: How to fix warning 'control reaches end of non-void function'
  • From: "Hugo Vasconcelos Saldanha" <hugovs@xxxxxxxxx>
• Re: Need help with the mmu notifiers patches.
  • From: "Peter Teoh" <htmldeveloper@xxxxxxxxx>
• Re: How to fix warning 'control reaches end of non-void function'
  • From: "Sandeep K Sinha" <sandeepksinha@xxxxxxxxx>
• perfmon2 Installation error
  • From: Shinoooo <shinukl1@xxxxxxxxx>
• Re: ext2_find_near
  • From: "Manish Katiyar" <mkatiyar@xxxxxxxxx>
• Re: How to fix warning 'control reaches end of non-void function'
  • From: "Alexander Beregalov" <a.beregalov@xxxxxxxxx>
• Re: How to fix warning 'control reaches end of non-void function'
  • From: Jacob <jacobchappelle@xxxxxxxxx>
• Re: ext2_find_near
  • From: Rene Herman <rene.herman@xxxxxxxxxxxx>
• Re: How to fix warning 'control reaches end of non-void function'
  • From: Rene Herman <rene.herman@xxxxxxxxxxxx>
• Re: How to fix warning 'control reaches end of non-void function'
  • From: Marcin Slusarz <marcin.slusarz@xxxxxxxxx>
• Re: How to fix warning 'control reaches end of non-void function'
  • From: Johannes Weiner <hannes@xxxxxxxxxxxx>
• Re: How to fix warning 'control reaches end of non-void function'
  • From: Johannes Weiner <hannes@xxxxxxxxxxxx>
• Re: How to fix warning 'control reaches end of non-void function'
  • From: "Daniel Baluta" <daniel.baluta@xxxxxxxxx>
• ext2_find_near
  • From: "Rohit Sharma" <imreckless@xxxxxxxxx>
• How to fix warning 'control reaches end of non-void function'
  • From: Alexander Beregalov <a.beregalov@xxxxxxxxx>
• YouTube - Greg Kroah Hartman on the Linux Kernel (Jun 2008)
  • From: Peter Teoh <htmldeveloper@xxxxxxxxx>
• Re: Can /proc/stat be trusted?
  • From: "Rafael Almeida" <almeidaraf@xxxxxxxxx>
• Re: Need help with the mmu notifiers patches.
  • From: "Cédric Augonnet" <cedric.augonnet@xxxxxxxxx>
• Re: Bitwise operations in Linux Kernel
  • From: Bernd Petrovitsch <bernd@xxxxxxxxx>
• Re: Multiple data streams
  • From: Mark Brown <markb@xxxxxxxxxxxxxxxxxxxxx>
• Re: How about implementing an online hierarchical storage on ext2/ext3 file system?
  • From: Scott Lovenberg <scott.lovenberg@xxxxxxxxx>
• Re: Multiple data streams
  • From: Scott Lovenberg <scott.lovenberg@xxxxxxxxx>
• Re: Read/Write sequence
  • From: Paulo da Silva <psdasilva@xxxxxxxxxxxx>
• Re: Bitwise operations in Linux Kernel
  • From: Paulo da Silva <psdasilva@xxxxxxxxxxxx>
• Re: Read/Write sequence
  • From: Paulo da Silva <psdasilva@xxxxxxxxxxxx>
• Bitwise operations in Linux Kernel
  • From: Balraj Dahiya <dahbal76@xxxxxxxxx>
• Re: Read/Write sequence
  • From: "Sandeep K Sinha" <sandeepksinha@xxxxxxxxx>
• Re: Read/Write sequence
  • From: Thomas Petazzoni <thomas.petazzoni@xxxxxxxxxxxxxxxxxx>
• Re: Recommended site: http://tuxology.net/
  • From: Thomas Petazzoni <thomas.petazzoni@xxxxxxxxxxxxxxxxxx>
• Re: How about implementing an online hierarchical storage on ext2/ext3 file system?
  • From: "rohit vashist" <rohitvashist2kk3@xxxxxxxxx>
• Linux Memory Management
  • From: Akhil <akhilesh.noida@xxxxxxxxx>
• Re: Need to debug a regression
  • From: Andre Prendel <andre_prendel@xxxxxx>
• Lots of presentation on ZFS on youtube
  • From: "Peter Teoh" <htmldeveloper@xxxxxxxxx>
• Interesting Undergrad Projects in Linux kernel
  • From: Peter Teoh <htmldeveloper@xxxxxxxxx>
• Re: Need help with the mmu notifiers patches.
  • From: "Peter Teoh" <htmldeveloper@xxxxxxxxx>
• Re: Merging two file systems
  • From: "Sandeep K Sinha" <sandeepksinha@xxxxxxxxx>
• Kernel runqueue
  • From: "Okan Aşık" <pardusokan@xxxxxxxxx>
• Merging two file systems
  • From: "Vineet Agarwal" <checkout.vineet@xxxxxxxxx>
• Re: Multiple data streams
  • From: "Sandeep K Sinha" <sandeepksinha@xxxxxxxxx>
• Re: Read/Write sequence
  • From: "Sandeep K Sinha" <sandeepksinha@xxxxxxxxx>
• Re: How about implementing an online hierarchical storage on ext2/ext3 file system?
  • From: "Sandeep K Sinha" <sandeepksinha@xxxxxxxxx>
• Re: Common mistakes in writing signal handler, or fault handler
  • From: "Mulyadi Santosa" <mulyadi.santosa@xxxxxxxxx>
• Re: Need help with the mmu notifiers patches.
  • From: "Cédric Augonnet" <cedric.augonnet@xxxxxxxxx>
• Re: Common mistakes in writing signal handler, or fault handler
  • From: Scott Lovenberg <scott.lovenberg@xxxxxxxxx>
• Re: Common mistakes in writing signal handler, or fault handler
  • From: "Mulyadi Santosa" <mulyadi.santosa@xxxxxxxxx>
• Re: Analyze a dump of memory
  • From: Scott Lovenberg <scott.lovenberg@xxxxxxxxx>
• Re: Need help with the mmu notifiers patches.
  • From: "Mulyadi Santosa" <mulyadi.santosa@xxxxxxxxx>
• Re: Find the calling function
  • From: "Mulyadi Santosa" <mulyadi.santosa@xxxxxxxxx>
• Re: Need to debug a regression
  • From: "Mulyadi Santosa" <mulyadi.santosa@xxxxxxxxx>
• Re: Analyze a dump of memory
  • From: "Mulyadi Santosa" <mulyadi.santosa@xxxxxxxxx>
• Re: PAT
  • From: "Mulyadi Santosa" <mulyadi.santosa@xxxxxxxxx>
• Re: kernel debugging
  • From: "Mulyadi Santosa" <mulyadi.santosa@xxxxxxxxx>
• Re: How about implementing an online hierarchical storage on ext2/ext3 file system?
  • From: Scott Lovenberg <scott.lovenberg@xxxxxxxxx>
• Re: Multiple data streams
  • From: Scott Lovenberg <scott.lovenberg@xxxxxxxxx>
• Re: How about implementing an online hierarchical storage on ext2/ext3 file system?
  • From: "rohit vashist" <rohitvashist2kk3@xxxxxxxxx>
• Multiple data streams
  • From: "Rohit Sharma" <imreckless@xxxxxxxxx>
• Re: How about implementing an online hierarchical storage on ext2/ext3 file system?
  • From: "rohit vashist" <rohitvashist2kk3@xxxxxxxxx>
• Porting Applications
  • From: Shaz <shazalive@xxxxxxxxx>
• Re: kernel debugging
  • From: Scott Lovenberg <scott.lovenberg@xxxxxxxxx>
• Re: Porting Zfs features to ext2/3
  • From: "Peter Teoh" <htmldeveloper@xxxxxxxxx>
• Porting Zfs features to ext2/3
  • From: "rishi agrawal" <postrishi@xxxxxxxxx>
• Need to debug a regression
  • From: "John M. Anderson" <sontek@xxxxxxxxx>
• Re: [patch 02/17] Kernel Tracepoints
  • From: "Peter Teoh" <htmldeveloper@xxxxxxxxx>
• Re: kernel debugging
  • From: "Peter Teoh" <htmldeveloper@xxxxxxxxx>
• Re: Need help with the mmu notifiers patches.
  • From: "Peter Teoh" <htmldeveloper@xxxxxxxxx>
• Recommended site: http://tuxology.net/
  • From: "Peter Teoh" <htmldeveloper@xxxxxxxxx>
• Common mistakes in writing signal handler, or fault handler
  • From: "Peter Teoh" <htmldeveloper@xxxxxxxxx>
• Read/Write sequence
  • From: Paulo da Silva <psdasilva@xxxxxxxxxxxx>
• Analyze a dump of memory
  • From: "Eduardo Júnior" <ihtraum18@xxxxxxxxx>
• Re: kernel debugging
  • From: "Peter Teoh" <htmldeveloper@xxxxxxxxx>
• Re: Find the calling function
  • From: Johannes Weiner <hannes@xxxxxxxxxxxx>
• Re: kernel debugging
  • From: "Mulyadi Santosa" <mulyadi.santosa@xxxxxxxxx>
• Re: Find the calling function
  • From: "Mulyadi Santosa" <mulyadi.santosa@xxxxxxxxx>
• test mail
  • From: "rishi agrawal" <postrishi@xxxxxxxxx>
• Re: Find the calling function
  • From: "Peter Teoh" <htmldeveloper@xxxxxxxxx>
• Re: Hacking from start_kernel()
  • From: "Peter Teoh" <htmldeveloper@xxxxxxxxx>
• Re: kernel debugging
  • From: "Peter Teoh" <htmldeveloper@xxxxxxxxx>
• Re: Find the calling function
  • From: "Mulyadi Santosa" <mulyadi.santosa@xxxxxxxxx>
• SPI Driver Howto
  • From: Janusz Piwek <janusz@xxxxxxxxx>
• Find the calling function
  • From: Elad Lahav <elad_lahav@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 4/22] avr32: Introducing asm/syscalls.h
  • From: Haavard Skinnemoen <haavard.skinnemoen@xxxxxxxxx>
• Re: [PATCH 4/22] avr32: Introducing asm/syscalls.h
  • From: Jaswinder Singh <jaswinder@xxxxxxxxxxxxx>
• Re: kernel debugging
  • From: "Mulyadi Santosa" <mulyadi.santosa@xxxxxxxxx>
• Re: Hacking from start_kernel()
  • From: "Lin Ming" <minggr@xxxxxxxxx>
• Re: [PATCH 4/22] avr32: Introducing asm/syscalls.h
  • From: Haavard Skinnemoen <haavard.skinnemoen@xxxxxxxxx>
• Re: Where does kernel store page tables?
  • From: "Mulyadi Santosa" <mulyadi.santosa@xxxxxxxxx>
• Re: Hacking from start_kernel()
  • From: "Mulyadi Santosa" <mulyadi.santosa@xxxxxxxxx>
• Re: Hacking from start_kernel()
  • From: "vinothkumar raman" <vinocit@xxxxxxxxx>
• Re: kernel debugging
  • From: "Lin Ming" <minggr@xxxxxxxxx>
• kernel debugging
  • From: "amol verule" <amol.debian@xxxxxxxxx>
• Hacking from start_kernel()
  • From: "vinothkumar raman" <vinocit@xxxxxxxxx>
• Re: RFE for Linux kernel
  • From: Wolfram Sang <w.sang@xxxxxxxxxxxxxx>
• Re: RFE for Linux kernel
  • From: "vaibhav khatavkar" <khatavkarvaibhav86@xxxxxxxxx>
• RFE for Linux kernel
  • From: onnm <on2008nm@xxxxxxxxx>
• Re: Question on functions related to swapping in pages.
  • From: "Peter Teoh" <htmldeveloper@xxxxxxxxx>
• Re: Question on functions related to swapping in pages.
  • From: Scott Lovenberg <scott.lovenberg@xxxxxxxxx>
• Re: Question on functions related to swapping in pages.
  • From: "Peter Teoh" <htmldeveloper@xxxxxxxxx>
• Re: Question on functions related to swapping in pages.
  • From: Rik van Riel <riel@xxxxxxxxxxx>
• Re: Question on functions related to swapping in pages.
  • From: ninjaboy <n0b0dyn1nj4@xxxxxxxxx>
• Re: Question on functions related to swapping in pages.
  • From: Rik van Riel <riel@xxxxxxxxxxx>
• Re: Can /proc/stat be trusted?
  • From: Elad Lahav <elahav@xxxxxxxxxxxx>
• Re: Question on functions related to swapping in pages.
  • From: Arn <cse.syslab@xxxxxxxxx>
• Re: Question on functions related to swapping in pages.
  • From: "Peter Teoh" <htmldeveloper@xxxxxxxxx>
• RE: Question on functions related to swapping in pages.
  • From: "Rajat Jain" <Rajat.Jain@xxxxxxxxxxxx>
• Re: Question on functions related to swapping in pages.
  • From: Arn <cse.syslab@xxxxxxxxx>
• Question on functions related to swapping in pages.
  • From: Arn <cse.syslab@xxxxxxxxx>
• Re: [PATCH] x86-rest: fix sparse warnings
  • From: Ingo Molnar <mingo@xxxxxxx>
• Re: [PATCH] x86-kernel: fix sparse warnings
  • From: Ingo Molnar <mingo@xxxxxxx>
• Re: [PATCH 0/22] Introducing asm/syscalls.h
  • From: Jaswinder Singh <jaswinder@xxxxxxxxxxxxx>
• Re: [PATCH 0/22] Introducing asm/syscalls.h
  • From: Jaswinder Singh <jaswinder@xxxxxxxxxxxxx>
• Re: [PATCH 0/22] Introducing asm/syscalls.h
  • From: Matthew Wilcox <matthew@xxxxxx>
• Re: [PATCH 0/22] Introducing asm/syscalls.h
  • From: Matthew Wilcox <matthew@xxxxxx>
• Re: [PATCH 0/22] Introducing asm/syscalls.h
  • From: Jaswinder Singh <jaswinder@xxxxxxxxxxxxx>
• Re: [PATCH 9/22] ia64: Introducing asm/syscalls.h
  • From: Jaswinder Singh <jaswinder@xxxxxxxxxxxxx>
• Re: Where does kernel store page tables?
  • From: "Peter Teoh" <htmldeveloper@xxxxxxxxx>
• Where does kernel store page tables?
  • From: ZelluX <zellux@xxxxxxxxx>
• [PATCH 18/22] sparc: Introducing asm/syscalls.h
  • From: Jaswinder Singh <jaswinder@xxxxxxxxxxxxx>
• [PATCH 8/22] h8300: Introducing asm/syscalls.h
  • From: Jaswinder Singh <jaswinder@xxxxxxxxxxxxx>
• [PATCH 19/22] um: Introducing asm/syscalls.h
  • From: Jaswinder Singh <jaswinder@xxxxxxxxxxxxx>
• [PATCH 12/22] m68knommu: Introducing asm/syscalls.h
  • From: Jaswinder Singh <jaswinder@xxxxxxxxxxxxx>
• [PATCH 13/22] mips: Introducing asm/syscalls.h
  • From: Jaswinder Singh <jaswinder@xxxxxxxxxxxxx>
• [PATCH 16/22] s390: Introducing asm/syscalls.h
  • From: Jaswinder Singh <jaswinder@xxxxxxxxxxxxx>
• [PATCH 5/22] blackfin: Introducing asm/syscalls.h
  • From: Jaswinder Singh <jaswinder@xxxxxxxxxxxxx>
• [PATCH 14/22] mn10300: Introducing asm/syscalls.h
  • From: Jaswinder Singh <jaswinder@xxxxxxxxxxxxx>
• [PATCH 15/22] parisc: Introducing asm/syscalls.h
  • From: Jaswinder Singh <jaswinder@xxxxxxxxxxxxx>
• [PATCH 17/22] sh: Introducing asm/syscalls.h
  • From: Jaswinder Singh <jaswinder@xxxxxxxxxxxxx>
• Re: [PATCH 9/22] ia64: Introducing asm/syscalls.h
  • From: Matthew Wilcox <matthew@xxxxxx>
• [PATCH 7/22] frv: Introducing asm/syscalls.h
  • From: Jaswinder Singh <jaswinder@xxxxxxxxxxxxx>
• [PATCH 21/22] x86: Introducing asm/syscalls.h
  • From: Jaswinder Singh <jaswinder@xxxxxxxxxxxxx>
• [PATCH 6/22] cris: Introducing asm/syscalls.h
  • From: Jaswinder Singh <jaswinder@xxxxxxxxxxxxx>
• [PATCH 1/22] Introducing asm/syscalls.h
  • From: Jaswinder Singh <jaswinder@xxxxxxxxxxxxx>
• [PATCH 9/22] ia64: Introducing asm/syscalls.h
  • From: Jaswinder Singh <jaswinder@xxxxxxxxxxxxx>
• [PATCH 3/22] arm: Introducing asm/syscalls.h
  • From: Jaswinder Singh <jaswinder@xxxxxxxxxxxxx>
• [PATCH 20/22] v850: Introducing asm/syscalls.h
  • From: Jaswinder Singh <jaswinder@xxxxxxxxxxxxx>
• [PATCH 11/22] m68k: Introducing asm/syscalls.h
  • From: Jaswinder Singh <jaswinder@xxxxxxxxxxxxx>
• Re: [PATCH 0/22] Introducing asm/syscalls.h
  • From: Alexey Dobriyan <adobriyan@xxxxxxxxx>
• [PATCH 10/22] m32r: Introducing asm/syscalls.h
  • From: Jaswinder Singh <jaswinder@xxxxxxxxxxxxx>
• [PATCH 22/22] xtensa: Introducing asm/syscalls.h
  • From: Jaswinder Singh <jaswinder@xxxxxxxxxxxxx>
• [PATCH 2/22] alpha: Introducing asm/syscalls.h
  • From: Jaswinder Singh <jaswinder@xxxxxxxxxxxxx>
• [PATCH 4/22] avr32: Introducing asm/syscalls.h
  • From: Jaswinder Singh <jaswinder@xxxxxxxxxxxxx>
• [PATCH 0/22] Introducing asm/syscalls.h
  • From: Jaswinder Singh <jaswinder@xxxxxxxxxxxxx>
• Re: [PATCH] x86-kernel: declare some functions before they get used
  • From: Ingo Molnar <mingo@xxxxxxx>
• Re: [PATCH] x86-kernel: declare some functions before they get used
  • From: Jaswinder Singh <jaswinder@xxxxxxxxxxxxx>
• ah, just noticed the sparse mailing list ...
  • From: "Robert P. J. Day" <rpjday@xxxxxxxxxxxxxx>
• so ... how can i deliberately generate a sparse context error?
  • From: "Robert P. J. Day" <rpjday@xxxxxxxxxxxxxx>
• a couple questions about sparse__acquires() and __releases() testing
  • From: "Robert P. J. Day" <rpjday@xxxxxxxxxxxxxx>
• Re: what means the gcc attribute of "context"?
  • From: "Robert P. J. Day" <rpjday@xxxxxxxxxxxxxx>
• Re: what means the gcc attribute of "context"?
  • From: Adrian Bunk <bunk@xxxxxxxxxx>
• Re: question about realtime scheduling on native linux
  • From: "Peter Teoh" <htmldeveloper@xxxxxxxxx>
• Re: question about realtime scheduling on native linux
  • From: "Mulyadi Santosa" <mulyadi.santosa@xxxxxxxxx>
• Re: where are __chk_user_ptr and __chk_io_ptr defined?
  • From: Johannes Weiner <hannes@xxxxxxxxxxxx>
• Re: any reason for the usage of "__attribute__((format(scanf..."?
  • From: Johannes Weiner <hannes@xxxxxxxxxxxx>
• Re: where are __chk_user_ptr and __chk_io_ptr defined?
  • From: ninjaboy <n0b0dyn1nj4@xxxxxxxxx>
• where are __chk_user_ptr and __chk_io_ptr defined?
  • From: "Robert P. J. Day" <rpjday@xxxxxxxxxxxxxx>
• RE: Graphic card for PowerPC platform
  • From: "Bizhan Gholikhamseh (bgholikh)" <bgholikh@xxxxxxxxx>
• what means the gcc attribute of "context"?
  • From: "Robert P. J. Day" <rpjday@xxxxxxxxxxxxxx>
• any reason for the usage of "__attribute__((format(scanf..."?
  • From: "Robert P. J. Day" <rpjday@xxxxxxxxxxxxxx>
• Re: What are these utilities used for?
  • From: "Peter Teoh" <htmldeveloper@xxxxxxxxx>
• Re: What are these utilities used for?
  • From: "Robert P. J. Day" <rpjday@xxxxxxxxxxxxxx>
• What are these utilities used for?
  • From: Peter Teoh <htmldeveloper@xxxxxxxxx>
• Re: Graphic card for PowerPC platform
  • From: jean-francois simon <jfs@xxxxxxxxxx>
• where change events from epoll_wait()
  • From: cpusoft <cpusoft@xxxxxxxxx>
• Re: Need help with the mmu notifiers patches.
  • From: "Peter Teoh" <htmldeveloper@xxxxxxxxx>
• question about realtime scheduling on native linux
  • From: Xiaolan Zhang <zhang.xiaolan@xxxxxxx>
• Re: Can /proc/stat be trusted?
  • From: "Rafael C. de Almeida" <almeidaraf@xxxxxxxxx>
• Need help with the mmu notifiers patches.
  • From: Arn <cse.syslab@xxxxxxxxx>
• RE: Graphic card for PowerPC platform
  • From: "Bizhan Gholikhamseh (bgholikh)" <bgholikh@xxxxxxxxx>
• Can /proc/stat be trusted?
  • From: Elad Lahav <elad_lahav@xxxxxxxxxxxxxxxxxxxxx>
• Re: Calling Convention for kernel drivers
  • From: Erik Mouw <mouw@xxxxxxxxxxxx>
• Calling Convention for kernel drivers
  • From: Asim <linkasim@xxxxxxxxx>
• Re: tiny_serial
  • From: "Peter Teoh" <htmldeveloper@xxxxxxxxx>
• Mapping kernel buffers to user space
  • From: "Laramy, Troy" <t-laramy@xxxxxx>
• Mapping kernel buffers to user space
  • From: "Laramy, Troy" <t-laramy@xxxxxx>
• Re: Graphic card for PowerPC platform
  • From: Erik Mouw <mouw@xxxxxxxxxxxx>
• Re: iostat problem
  • From: "Parag N(पराग़)" <panemade@xxxxxxxxx>
• Re: Graphic card for PowerPC platform
  • From: jean-francois simon <jfs@xxxxxxxxxx>
• iostat problem
  • From: "Wang Yu" <wangyuict@xxxxxxxxx>
• Softmac or fullmac
  • From: "Mitul Modi" <mituld.modi@xxxxxxxxx>
• Re: Assembly code for calling a function on amd machine
  • From: Asim <linkasim@xxxxxxxxx>
• Sync_page_io() call hangs when called from make_request (2.6.25)
  • From: "Unmil Tambe" <catchunmil@xxxxxxxxx>
• Re: Assembly code for calling a function on amd machine
  • From: "Peter Teoh" <htmldeveloper@xxxxxxxxx>
• Re: Assembly code for calling a function on amd machine
  • From: Asim <linkasim@xxxxxxxxx>
• Sync_page_io() call hangs when called from make_request (2.6.25)
  • From: "Unmil Tambe" <catchunmil@xxxxxxxxx>
• Re: Which tree is the best to begin?
  • From: "Frédéric Weisbecker" <f.weisbecker@xxxxxxxxx>
• Softmac or fullmac
  • From: "Mitul modi" <mitul.linux@xxxxxxxxx>
• Re: Kernel Executable Pages
  • From: Asim <linkasim@xxxxxxxxx>
• Re: Building a kernel module for 2.6.23 kernel on a machine with 2.6.25 kernel.
  • From: "Peter Teoh" <htmldeveloper@xxxxxxxxx>
• Re: Kernel Executable Pages
  • From: "Peter Teoh" <htmldeveloper@xxxxxxxxx>
• Re: Assembly code for calling a function on amd machine
  • From: Erik Mouw <mouw@xxxxxxxxxxxx>
• Assembly code for calling a function on amd machine
  • From: Asim <linkasim@xxxxxxxxx>
• Graphic card for PowerPC platform
  • From: "Bizhan Gholikhamseh (bgholikh)" <bgholikh@xxxxxxxxx>
• Re: How to trick the kernel for Ram size?
  • From: "Robert P. J. Day" <rpjday@xxxxxxxxxxxxxx>
• How to trick the kernel for Ram size?
  • From: "Bizhan Gholikhamseh (bgholikh)" <bgholikh@xxxxxxxxx>
• Re: Kernel Executable Pages
  • From: Asim <linkasim@xxxxxxxxx>
• Re: Kernel Executable Pages
  • From: Asim <linkasim@xxxxxxxxx>
• Re: Kernel Executable Pages
  • From: "Sandeep K Sinha" <sandeepksinha@xxxxxxxxx>
• Kernel Executable Pages
  • From: Asim <linkasim@xxxxxxxxx>
• Re: [PATCH] x86: Introducing asm-x86/syscalls.h
  • From: Jaswinder Singh <jaswinder@xxxxxxxxxxxxx>
• Re: [PATCH] x86: traps and do_traps under one hood
  • From: Jaswinder Singh <jaswinder@xxxxxxxxxxxxx>
• Re: request for webcam driver help
  • From: Christophe Lucas <clucas@xxxxxxxxxx>
• Re: [PATCH] x86: Introducing asm-x86/syscalls.h
  • From: David Woodhouse <dwmw2@xxxxxxxxxxxxx>
• Re: [PATCH] x86: traps and do_traps under one hood
  • From: "Alexander van Heukelum" <heukelum@xxxxxxxxxxx>
• Re: [PATCH] x86: traps and do_traps under one hood
  • From: David Woodhouse <dwmw2@xxxxxxxxxxxxx>
• Re: [PATCH] x86: Introducing asm-x86/syscalls.h
  • From: Jaswinder Singh <jaswinder@xxxxxxxxxxxxx>
• [PATCH] x86: traps and do_traps under one hood
  • From: Jaswinder Singh <jaswinder@xxxxxxxxxxxxx>
• [PATCH] x86: Introducing asm-x86/syscalls.h
  • From: Jaswinder Singh <jaswinder@xxxxxxxxxxxxx>
• Re: "soft" vs "hard" real-time?
  • From: Bernd Petrovitsch <bernd@xxxxxxxxx>
• Re: "soft" vs "hard" real-time?
  • From: "Roberto A. Foglietta" <roberto.foglietta@xxxxxxxxx>
• Problem while loading custom tty driver...
  • From: ashish mahamuni <ashitpro@xxxxxxxxxxx>
• Re: Building a kernel module for 2.6.23 kernel on a machine with 2.6.25 kernel.
  • From: "Mulyadi Santosa" <mulyadi.santosa@xxxxxxxxx>
• Re: "soft" vs "hard" real-time?
  • From: Henrik Austad <henrikau@xxxxxxxxxxxxxx>
• Re: "soft" vs "hard" real-time?
  • From: Henrik Austad <henrikau@xxxxxxxxxxxxxx>
• Re: "soft" vs "hard" real-time?
  • From: Bernd Petrovitsch <bernd@xxxxxxxxx>
• Re: "soft" vs "hard" real-time?
  • From: andi <andi.platschek@xxxxxxxxx>
• tiny_serial
  • From: Sébastien Chrétien <chretien@xxxxxxxxxx>
• Re: "soft" vs "hard" real-time?
  • From: "Robert P. J. Day" <rpjday@xxxxxxxxxxxxxx>
• Re: "soft" vs "hard" real-time?
  • From: Bernd Petrovitsch <bernd@xxxxxxxxx>
• Re: "soft" vs "hard" real-time?
  • From: "Roberto A. Foglietta" <roberto.foglietta@xxxxxxxxx>
• Re: "soft" vs "hard" real-time?
  • From: andi <andi.platschek@xxxxxxxxx>
• Re: "soft" vs "hard" real-time?
  • From: "Mrunal Gawade" <mrunal.gawade@xxxxxxxxx>
• Re: "soft" vs "hard" real-time?
  • From: "Robert P. J. Day" <rpjday@xxxxxxxxxxxxxx>
• Re: Which tree is the best to begin?
  • From: Roman Mindalev <lists@xxxxxxxxx>
• [PATCH] x86-kernel: declare some functions before they get used
  • From: Jaswinder Singh <jaswinder@xxxxxxxxxxxxx>
• Re: [PATCH] advansys: use request_firmware
  • From: David Woodhouse <dwmw2@xxxxxxxxxxxxx>
• Re: [PATCH] advansys: use request_firmware
  • From: Matthew Wilcox <matthew@xxxxxx>
• Re: using snull
  • From: Asim <linkasim@xxxxxxxxx>
• Re: [PATCH] advansys: use request_firmware
  • From: David Woodhouse <dwmw2@xxxxxxxxxxxxx>
• Re: [PATCH] advansys: use request_firmware
  • From: Matthew Wilcox <matthew@xxxxxx>
• Re: [PATCH] qla1280: use request_firmware
  • From: Jes Sorensen <jes@xxxxxxx>
• Re: IP Address
  • From: Erik Mouw <mouw@xxxxxxxxxxxx>
• "soft" vs "hard" real-time?
  • From: "Robert P. J. Day" <rpjday@xxxxxxxxxxxxxx>
• Re: [PATCH] qla1280: use request_firmware
  • From: David Woodhouse <dwmw2@xxxxxxxxxxxxx>
• RE: IP Address
  • From: "Rajat Jain" <Rajat.Jain@xxxxxxxxxxxx>
• Re: [PATCH] qla1280: use request_firmware
  • From: Jaswinder Singh <jaswinder@xxxxxxxxxxxxx>
• RE: IP Address
  • From: "Kathiresan, Lekshmanan" <Lekshmanan.Kathiresan@xxxxxxxxxxxxx>
• Building a kernel module for 2.6.23 kernel on a machine with 2.6.25 kernel.
  • From: "Mark Ryden" <markryde@xxxxxxxxx>
• Re: [PATCH] qla1280: use request_firmware
  • From: Jes Sorensen <jes@xxxxxxx>
• IP Address
  • From: jelari <ramprakash.thinakaran@xxxxxxxxx>
• Re: gcc versions and ABI changes
  • From: ashok <ashok.shanmugam@xxxxxxxxx>
• Re: system halted----kernel problem
  • From: "amol verule" <amol.debian@xxxxxxxxx>
• Re: a few simple questions about "kexec"
  • From: "Mulyadi Santosa" <mulyadi.santosa@xxxxxxxxx>
• Re: gcc versions and ABI changes
  • From: "Mulyadi Santosa" <mulyadi.santosa@xxxxxxxxx>
• Re: using snull
  • From: "Mulyadi Santosa" <mulyadi.santosa@xxxxxxxxx>
• Re: system halted----kernel problem
  • From: "Mulyadi Santosa" <mulyadi.santosa@xxxxxxxxx>
• Re: requst for net device driver help
  • From: Asim <linkasim@xxxxxxxxx>
• requst for net device driver help
  • From: "Jovi Jia" <jovi.jia@xxxxxxxxx>
• Re: system halted----kernel problem
  • From: "amol verule" <amol.debian@xxxxxxxxx>
• Re: Which tree is the best to begin?
  • From: Li Zefan <lizf@xxxxxxxxxxxxxx>
• Re: using snull
  • From: Asim <linkasim@xxxxxxxxx>
• RE: gcc versions and ABI changes
  • From: <ashok.shanmugam@xxxxxxxxx>
• Re: Which tree is the best to begin?
  • From: "Frédéric Weisbecker" <f.weisbecker@xxxxxxxxx>
• request for webcam driver help
  • From: <srinivas.ramana@xxxxxxxxx>
• Re: a few simple questions about "kexec"
  • From: "Robert P. J. Day" <rpjday@xxxxxxxxxxxxxx>
• Re: /proc/stat cpu data
  • From: "Rafael C. de Almeida" <almeidaraf@xxxxxxxxx>
• /proc/stat cpu data
  • From: "Rafael C. de Almeida" <almeidaraf@xxxxxxxxx>
• Re: a few simple questions about "kexec"
  • From: "Mulyadi Santosa" <mulyadi.santosa@xxxxxxxxx>
• Re: using snull
  • From: "Mulyadi Santosa" <mulyadi.santosa@xxxxxxxxx>
• [PATCH] x86-rest: fix sparse warnings
  • From: Jaswinder Singh <jaswinder@xxxxxxxxxxxxx>
• Re: using snull
  • From: Asim <linkasim@xxxxxxxxx>
• Re: Which tree is the best to begin?
  • From: "Jesper Juhl" <jesper.juhl@xxxxxxxxx>
• a few simple questions about "kexec"
  • From: "Robert P. J. Day" <rpjday@xxxxxxxxxxxxxx>
• Re: [PATCH] advansys: use request_firmware
  • From: Jaswinder Singh <jaswinder@xxxxxxxxxxxxx>
• [PATCH] init: fix sparse warnings
  • From: Jaswinder Singh <jaswinder@xxxxxxxxxxxxx>
• Re: [PATCH] advansys: use request_firmware
  • From: Matthew Wilcox <matthew@xxxxxx>
• [PATCH] x86-kernel: fix sparse warnings
  • From: Jaswinder Singh <jaswinder@xxxxxxxxxxxxx>
• Re: Which tree is the best to begin?
  • From: "Kyle Spaans" <3lucid@xxxxxxxxx>
• Re: using snull
  • From: "Mulyadi Santosa" <mulyadi.santosa@xxxxxxxxx>
• Re: system halted----kernel problem
  • From: "Mulyadi Santosa" <mulyadi.santosa@xxxxxxxxx>
• Re: gcc versions and ABI changes
  • From: "Mulyadi Santosa" <mulyadi.santosa@xxxxxxxxx>
• Which tree is the best to begin?
  • From: "Frédéric Weisbecker" <f.weisbecker@xxxxxxxxx>
• Re: [Bulk] Re: My overview of the kernel --> do I have it correct ??
  • From: William Case <billlinux@xxxxxxxxxx>
• Re: My overview of the kernel --> do I have it correct ??
  • From: Rik van Riel <riel@xxxxxxxxxxx>
• Re: [PATCH] vicam: use request_firmware()
  • From: Jaswinder Singh <jaswinder@xxxxxxxxxxxxx>
• system halted----kernel problem
  • From: "amol verule" <amol.debian@xxxxxxxxx>
• Re: [PATCH] vicam: use request_firmware()
  • From: Pavel Machek <pavel@xxxxxxx>
• Re: My overview of the kernel --> do I have it correct ??
  • From: Rene Herman <rene.herman@xxxxxxxxxxxx>
• using snull
  • From: Asim <linkasim@xxxxxxxxx>
• Re: My overview of the kernel --> do I have it correct ??
  • From: Wolfram Sang <w.sang@xxxxxxxxxxxxxx>
• Re: My overview of the kernel --> do I have it correct ??
  • From: William Case <billlinux@xxxxxxxxxx>
• RE: My overview of the kernel --> do I have it correct ??
  • From: "Welch, Martyn (GE EntSol, Intelligent Platforms)" <martyn.welch@xxxxxxxxxxx>
• Re: My overview of the kernel --> do I have it correct ??
  • From: Rene Herman <rene.herman@xxxxxxxxxxxx>
• gcc versions and ABI changes
  • From: ashok <ashok.shanmugam@xxxxxxxxx>
• Re: My overview of the kernel --> do I have it correct ?? -- TYPOS, TYPOS
  • From: William Case <billlinux@xxxxxxxxxx>
• Re: My overview of the kernel --> do I have it correct ??
  • From: William Case <billlinux@xxxxxxxxxx>
• Re: Message Queue
  • From: Rene Herman <rene.herman@xxxxxxxxxxxx>
• Re: getting panic during kmalloc
  • From: "Shreyansh Jain" <shrey.linux@xxxxxxxxx>
• Re: Message Queue.
  • From: Rene Herman <rene.herman@xxxxxxxxxxxx>
• Re: Message Queue.
  • From: jelari <ramprakash.thinakaran@xxxxxxxxx>
• Re: My overview of the kernel --> do I have it correct ??
  • From: Rene Herman <rene.herman@xxxxxxxxxxxx>
• Re: Message Queue.
  • From: "Nelson Castillo" <nelsoneci@xxxxxxxxx>
• Message Queue.
  • From: jelari <ramprakash.thinakaran@xxxxxxxxx>
• Re: Need info on timer/timing mechanisms (w.r.t KVM)
  • From: "Mulyadi Santosa" <mulyadi.santosa@xxxxxxxxx>
• Re: Some doubts about ZONE_NORMAL and ZONE_HIGHMEM
  • From: "Mulyadi Santosa" <mulyadi.santosa@xxxxxxxxx>
• Re: Message Queue
  • From: jelari <ramprakash.thinakaran@xxxxxxxxx>
• Message Queue
  • From: jelari <ramprakash.thinakaran@xxxxxxxxx>
• Re: My overview of the kernel --> do I have it correct ??
  • From: William Case <billlinux@xxxxxxxxxx>
• Re: My overview of the kernel --> do I have it correct ??
  • From: Rik van Riel <riel@xxxxxxxxxxx>
• Re: My overview of the kernel --> do I have it correct ??
  • From: Wolfram Sang <w.sang@xxxxxxxxxxxxxx>
• Re: [Bulk] Re: My overview of the kernel --> do I have it correct ??
  • From: Wolfram Sang <w.sang@xxxxxxxxxxxxxx>
• Re: Help please
  • From: Wolfram Sang <w.sang@xxxxxxxxxxxxxx>
• Re: My overview of the kernel --> do I have it correct ??
  • From: William Case <billlinux@xxxxxxxxxx>
• Need info on timer/timing mechanisms (w.r.t KVM)
  • From: Arn <cse.syslab@xxxxxxxxx>
• Re: My overview of the kernel --> do I have it correct ??
  • From: William Case <billlinux@xxxxxxxxxx>
• Re: [Bulk] Re: My overview of the kernel --> do I have it correct ??
  • From: William Case <billlinux@xxxxxxxxxx>
• Re: My overview of the kernel --> do I have it correct ??
  • From: "Pranav Peshwe" <pranavpeshwe@xxxxxxxxx>
• Re: Help please
  • From: Henrik Austad <henrikau@xxxxxxxxxxxxxx>
• Re: My overview of the kernel --> do I have it correct ?? -- Typo fixes
  • From: William Case <billlinux@xxxxxxxxxx>
• Re: My overview of the kernel --> do I have it correct ??
  • From: William Case <billlinux@xxxxxxxxxx>
• Re: Some doubts about ZONE_NORMAL and ZONE_HIGHMEM
  • From: "Peter Teoh" <htmldeveloper@xxxxxxxxx>
• Re: My overview of the kernel --> do I have it correct ??
  • From: "Kyle Spaans" <3lucid@xxxxxxxxx>
• Re: structure
  • From: Erik Mouw <mouw@xxxxxxxxxxxx>
• My overview of the kernel --> do I have it correct ??
  • From: William Case <billlinux@xxxxxxxxxx>
• structure
  • From: jelari <ramprakash.thinakaran@xxxxxxxxx>
• Re: Help please
  • From: Asim <linkasim@xxxxxxxxx>
• Re: Help please
  • From: Henrik Austad <henrikau@xxxxxxxxxxxxxx>
• Help please
  • From: Vikram_Upparpalli <Vikram_Upparpalli@xxxxxxxxxx>
• Re: getting panic during kmalloc
  • From: "gagan grover" <grovershah@xxxxxxxxx>
• Re: [PATCH] dsp56k: use request_firmware
  • From: David Woodhouse <dwmw2@xxxxxxxxxxxxx>
• Re: Some doubts about ZONE_NORMAL and ZONE_HIGHMEM
  • From: "Mulyadi Santosa" <mulyadi.santosa@xxxxxxxxx>
• Some doubts about ZONE_NORMAL and ZONE_HIGHMEM
  • From: "Peter Teoh" <htmldeveloper@xxxxxxxxx>
• Re: [PATCH] dsp56k: use request_firmware
  • From: Fredrik Noring <noring@xxxxxxxxxx>
• Re: Defining new variables for use in multiple c files. How do I create header files that can be #included in multiple c files?
  • From: "Daniel Baluta" <daniel.baluta@xxxxxxxxx>
• Re: Defining new variables for use in multiple c files. How do I create header files that can be #included in multiple c files?
  • From: "Alberto Giménez" <lagimenez@xxxxxxxxx>
• Re: Defining new variables for use in multiple c files. How do I create header files that can be #included in multiple c files?
  • From: Erik Mouw <mouw@xxxxxxxxxxxx>
• Defining new variables for use in multiple c files. How do I create header files that can be #included in multiple c files?
  • From: Bradley Hanna <brahan.ml@xxxxxxxxx>
• Re: Freebsd namei equivalent in Linux VFS
  • From: naresh kumar <cyan_00391@xxxxxxxxxxx>
• Re: Freebsd namei equivalent in Linux VFS
  • From: Erik Mouw <mouw@xxxxxxxxxxxx>
• Re: [PATCH] dsp56k: use request_firmware
  • From: David Woodhouse <dwmw2@xxxxxxxxxxxxx>
• Re: serial driver changes
  • From: Hinko Kocevar <hinko.kocevar@xxxxxxxxxxxx>
• Re: serial driver changes
  • From: Octavian Purdila <tavi@xxxxxxxxx>
• Re: getting panic during kmalloc
  • From: "Lin Ming" <minggr.knb@xxxxxxxxx>
• Re: getting panic during kmalloc
  • From: "Mulyadi Santosa" <mulyadi.santosa@xxxxxxxxx>
• Freebsd namei equivalent in Linux VFS
  • From: naresh kumar <cyan_00391@xxxxxxxxxxx>
• Re: serial driver changes
  • From: Hinko Kocevar <hinko.kocevar@xxxxxxxxxxxx>
• Re: getting panic during kmalloc
  • From: "Shreyansh Jain" <shrey.linux@xxxxxxxxx>
• Re: serial driver changes
  • From: Hinko Kocevar <hinko.kocevar@xxxxxxxxxxxx>
• Re: getting panic during kmalloc
  • From: "Shreyansh Jain" <shrey.linux@xxxxxxxxx>
• Re: getting panic during kmalloc
  • From: "gagan grover" <grovershah@xxxxxxxxx>
• Re: Modifying ext3
  • From: kinto92 <kinto92@xxxxxxxxx>
• Re: serial driver changes
  • From: Octavian Purdila <tavi@xxxxxxxxx>
• Re: [linux-dvb] [PATCH] Remove fdump tool for av7110 firmware
  • From: Oliver Endriss <o.endriss@xxxxxx>
• Re: any one working on real-time research projects?
  • From: Henrik Austad <henrikau@xxxxxxxxxxxxxx>
• ARM and co-processor - linux device model
  • From: "Belisko Marek" <marek.belisko@xxxxxxxxx>
• serial driver changes
  • From: Hinko Kocevar <hinko.kocevar@xxxxxxxxxxxx>
• RE: linux - 2.6 - driver compilation - Makefile
  • From: Pintu Agarwal <pintu.agarwal@xxxxxxxxxx>
• Re: round_jiffies() question
  • From: "Mulyadi Santosa" <mulyadi.santosa@xxxxxxxxx>
• Re: [linux-dvb] [PATCH] Remove fdump tool for av7110 firmware
  • From: Alan Cox <alan@xxxxxxxxxxxxxxxxxxx>
• Re: [linux-dvb] [PATCH] Remove fdump tool for av7110 firmware
  • From: Mauro Carvalho Chehab <mchehab@xxxxxxxxxxxxx>
• any recommendations on good tutorials on the MTD layer?
  • From: "Robert P. J. Day" <rpjday@xxxxxxxxxxxxxx>
• Re: any one working on real-time research projects?
  • From: "Gabriele Modena" <gabriele.modena@xxxxxxxxx>
• RE: linux - 2.6 - driver compilation - Makefile
  • From: Thomas Rega <mail@xxxxxxxxxx>
• Re: linux - 2.6 - driver compilation - Makefile
  • From: Thomas Rega <mail@xxxxxxxxxx>
• RE: linux - 2.6 - driver compilation - Makefile
  • From: Pintu Agarwal <pintu.agarwal@xxxxxxxxxx>
• Re: mixing interupts and threads.
  • From: Matthew Wilcox <matthew@xxxxxx>
• Re: round_jiffies() question
  • From: Matthew Wilcox <matthew@xxxxxx>
• linux - 2.6 - driver compilation - Makefile
  • From: Pintu Agarwal <pintu.agarwal@xxxxxxxxxx>
• Re: Module loading and Unloading
  • From: Anup Patil <anupp@xxxxxxx>
• Re: mixing interupts and threads.
  • From: "Shreyansh Jain" <shrey.linux@xxxxxxxxx>
• Re: mixing interupts and threads.
  • From: Scott Lovenberg <scott.lovenberg@xxxxxxxxx>
• mixing interupts and threads.
  • From: ravikumar <ravikumar.vallabhu@xxxxxxxxx>
• round_jiffies() question
  • From: "Stoyan Gaydarov" <stoyboyker@xxxxxxxxx>
• Re: [linux-dvb] [PATCH] Remove fdump tool for av7110 firmware
  • From: Oliver Endriss <o.endriss@xxxxxx>
• PCI device mapped above 4GB
  • From: jean-francois simon <jfs@xxxxxxxxxx>
• Re: [PATCH] dsp56k: use request_firmware
  • From: Fredrik Noring <noring@xxxxxxxxxx>
• Re: [PATCH] dsp56k: use request_firmware
  • From: David Woodhouse <dwmw2@xxxxxxxxxxxxx>
• Re: [PATCH] dsp56k: use request_firmware
  • From: Jaswinder Singh <jaswinder@xxxxxxxxxxxxx>
• Re: [PATCH] dsp56k: use request_firmware
  • From: Fredrik Noring <noring@xxxxxxxxxx>
• Re: [PATCH] dsp56k: use request_firmware
  • From: Jaswinder Singh <jaswinder@xxxxxxxxxxxxx>
• Re: [linux-dvb] [PATCH] Remove fdump tool for av7110 firmware
  • From: David Woodhouse <dwmw2@xxxxxxxxxxxxx>
• Re: [linux-dvb] [PATCH] Remove fdump tool for av7110 firmware
  • From: "Devin Heitmueller" <devin.heitmueller@xxxxxxxxx>
• Re: [PATCH] dsp56k: use request_firmware
  • From: Fredrik Noring <noring@xxxxxxxxxx>
• Re: [linux-dvb] [PATCH] Remove fdump tool for av7110 firmware
  • From: David Woodhouse <dwmw2@xxxxxxxxxxxxx>
• Re: [linux-dvb] [PATCH] Remove fdump tool for av7110 firmware
  • From: Klaus Schmidinger <Klaus.Schmidinger@xxxxxxxxxx>
• Re: [linux-dvb] [PATCH] Remove fdump tool for av7110 firmware
  • From: Jaswinder Singh <jaswinder@xxxxxxxxxxxxx>
• Re: Time loss after calling netif_rx() in a kernel thread
  • From: "Mulyadi Santosa" <mulyadi.santosa@xxxxxxxxx>
• Re: [linux-dvb] [PATCH] Remove fdump tool for av7110 firmware
  • From: Oliver Endriss <o.endriss@xxxxxx>
• Re: Priority Inversion/Inheritance in Linux Kernel
  • From: Rene Herman <rene.herman@xxxxxxxxxxxx>
• Re: Priority Inversion/Inheritance in Linux Kernel
  • From: "Peter Teoh" <htmldeveloper@xxxxxxxxx>
• Re: What is CR3 caching?
  • From: "Peter Teoh" <htmldeveloper@xxxxxxxxx>
• Re: is overwriting user data acceptable
  • From: Rik van Riel <riel@xxxxxxxxxxx>
• Re: is overwriting user data acceptable
  • From: "bhanu nani" <bhanu.lnxnew@xxxxxxxxx>
• Re: Time loss after calling netif_rx() in a kernel thread
  • From: Lukas Razik <linux@xxxxxxxxxx>
• Re: What is CR3 caching?
  • From: "Pranav Peshwe" <pranavpeshwe@xxxxxxxxx>
• Re: any one working on real-time research projects?
  • From: Henrik Austad <henrikau@xxxxxxxxxxxxxx>
• Re: how can the kernel read from a processes pages ?
  • From: "Mulyadi Santosa" <mulyadi.santosa@xxxxxxxxx>
• Re: What is CR3 caching?
  • From: "Mulyadi Santosa" <mulyadi.santosa@xxxxxxxxx>
• [PATCH] firmware: convert sb16_csp driver to use firmware loader exclusively
  • From: Jaswinder Singh <jaswinder@xxxxxxxxxxxxx>
• Re: Time loss after calling netif_rx() in a kernel thread
  • From: "Mulyadi Santosa" <mulyadi.santosa@xxxxxxxxx>
• Re: what is BUG_ON macro?
  • From: Michal <rabbit50@xxxxxxxxx>
• [PATCH] dsp56k: use request_firmware
  • From: Jaswinder Singh <jaswinder@xxxxxxxxxxxxx>
• Re: is overwriting user data acceptable
  • From: Rik van Riel <riel@xxxxxxxxxxx>
• is overwriting user data acceptable
  • From: "bhanu nani" <bhanu.lnxnew@xxxxxxxxx>
• [PATCH] edgeport-ti: use request_firmware()
  • From: Jaswinder Singh <jaswinder@xxxxxxxxxxxxx>
• Re: any one working on real-time research projects?
  • From: "Nelson Castillo" <nelsoneci@xxxxxxxxx>
• Re: any one working on real-time research projects?
  • From: "Alberto Giménez" <lagimenez@xxxxxxxxx>
• Re: Priority Inversion/Inheritance in Linux Kernel
  • From: Rene Herman <rene.herman@xxxxxxxxxxxx>
• Re: Priority Inversion/Inheritance in Linux Kernel
  • From: "Peter Teoh" <htmldeveloper@xxxxxxxxx>
• optimal hardware design for an ARM9 based single board computer to work with existing linux drivers
  • From: Stefan Schoenleitner <dev.c0debabe@xxxxxxxxx>
• Re: Priority Inversion/Inheritance in Linux Kernel
  • From: Rene Herman <rene.herman@xxxxxxxxxxxx>
• Re: [PATCH] edgeport: use request_firmware
  • From: Jaswinder Singh <jaswinder@xxxxxxxxxxxxx>
• Re: [PATCH] Fix up uses of BUG
  • From: Octavian Purdila <tavi@xxxxxxxxx>
• Re: BUG_ON()
  • From: yalong <aginobili@xxxxxxxxx>
• Re: BUG_ON()
  • From: Johannes Weiner <hannes@xxxxxxxxxxxx>
• Re: [PATCH] Fix up uses of BUG
  • From: "Stoyan Gaydarov" <stoyboyker@xxxxxxxxx>
• Re: [PATCH] Fix up uses of BUG
  • From: "Stoyan Gaydarov" <stoyboyker@xxxxxxxxx>
• Re: BUG_ON()
  • From: yalong <aginobili@xxxxxxxxx>
• Re: Priority Inversion/Inheritance in Linux Kernel
  • From: "Peter Teoh" <htmldeveloper@xxxxxxxxx>
• is "__setup" really deprecated?
  • From: "Robert P. J. Day" <rpjday@xxxxxxxxxxxxxx>
• Re: what is BUG_ON macro?
  • From: Johannes Weiner <hannes@xxxxxxxxxxxx>
• Re: BUG_ON()
  • From: Johannes Weiner <hannes@xxxxxxxxxxxx>
• Where should new syscall entrys for the x86_64 arch be entered?
  • From: "Bradley Hanna" <brahan.ml@xxxxxxxxx>
• what is BUG_ON macro?
  • From: Michal <rabbit50@xxxxxxxxx>
• Re: [PATCH] edgeport: use request_firmware
  • From: Greg KH <greg@xxxxxxxxx>
• Re: Priority Inversion/Inheritance in Linux Kernel
  • From: Rene Herman <rene.herman@xxxxxxxxxxxx>
• [PATCH] edgeport: use request_firmware
  • From: Jaswinder Singh <jaswinder@xxxxxxxxxxxxx>
• Re: Priority Inversion/Inheritance in Linux Kernel
  • From: "Peter Teoh" <htmldeveloper@xxxxxxxxx>
• What is CR3 caching?
  • From: "Peter Teoh" <htmldeveloper@xxxxxxxxx>
• Re: IDT/Exception handling understanding - kernel vs userspace control path
  • From: "Peter Teoh" <htmldeveloper@xxxxxxxxx>
• Re: [PATCH] Fix up uses of BUG
  • From: Rik van Riel <riel@xxxxxxxxxxx>
• Re: Priority Inversion/Inheritance in Linux Kernel
  • From: "Roberto A. Foglietta" <roberto.foglietta@xxxxxxxxx>
• Priority Inversion/Inheritance in Linux Kernel
  • From: "Peter Teoh" <htmldeveloper@xxxxxxxxx>
• [PATCH] Fix up uses of BUG
  • From: "Stoyan Gaydarov" <stoyboyker@xxxxxxxxx>
• Re: Time loss after calling netif_rx() in a kernel thread
  • From: Henrik Austad <henrikau@xxxxxxxxxxxxxx>
• Re: BUG_ON()
  • From: Bradley Hanna <brahan.ml@xxxxxxxxx>
• any one working on real-time research projects?
  • From: Bradley Hanna <brahan.ml@xxxxxxxxx>
• BUG_ON()
  • From: "Stoyan Gaydarov" <stoyboyker@xxxxxxxxx>
• Re: Where is the unlikely subroutine defined?
  • From: Viliam <viliamjr@xxxxxxxxx>
• Where is the unlikely subroutine defined?
  • From: Bradley Hanna <brahan.ml@xxxxxxxxx>
• how can the kernel read from a processes pages ?
  • From: Arn <cse.syslab@xxxxxxxxx>
• Re: Time loss after calling netif_rx() in a kernel thread
  • From: Lukas Razik <linux@xxxxxxxxxx>
• Re: Newbie: kernel search techniques ??
  • From: Wolfram Sang <w.sang@xxxxxxxxxxxxxx>
• Re: Bad page state at free_hot_cold_page
  • From: "BJörn Lindqvist" <bjourne@xxxxxxxxx>
• Re: getting panic during kmalloc
  • From: Matthias Kaehlcke <matthias@xxxxxxxxxxxx>
• Re: Time loss after calling netif_rx() in a kernel thread
  • From: "Mulyadi Santosa" <mulyadi.santosa@xxxxxxxxx>
• Re: getting panic during kmalloc
  • From: "Mulyadi Santosa" <mulyadi.santosa@xxxxxxxxx>
• Re: Newbie: kernel search techniques ??
  • From: Mark Brown <markb@xxxxxxxxxxxxxxxxxxxxx>
• Re: getting panic during kmalloc
  • From: Mark Brown <markb@xxxxxxxxxxxxxxxxxxxxx>
• Newbie: kernel search techniques ??
  • From: William Case <billlinux@xxxxxxxxxx>
• Re: IDT/Exception handling understanding - kernel vs userspace control path
  • From: "Mulyadi Santosa" <mulyadi.santosa@xxxxxxxxx>
• RE: getting panic during kmalloc
  • From: "Rajat Jain" <Rajat.Jain@xxxxxxxxxxxx>
• Re: Kernel build problem
  • From: Erik Mouw <mouw@xxxxxxxxxxxx>
• getting panic during kmalloc
  • From: "gagan grover" <grovershah@xxxxxxxxx>
• Kernel build problem
  • From: "Shyamal Shukla" <shyamalshukla@xxxxxxxxx>
• Re: Time loss after calling netif_rx() in a kernel thread
  • From: Lukas Razik <razik@xxxxxxxxxxxxxxxxxxx>
• Re: IDT/Exception handling understanding - kernel vs userspace control path
  • From: "Peter Teoh" <htmldeveloper@xxxxxxxxx>
• Re: IDT/Exception handling understanding - kernel vs userspace control path
  • From: "Peter Teoh" <htmldeveloper@xxxxxxxxx>
• Re: Time loss after calling netif_rx() in a kernel thread
  • From: "Mulyadi Santosa" <mulyadi.santosa@xxxxxxxxx>
• Re: [PATCH] fix mmap uninitialized warnings
  • From: "Mulyadi Santosa" <mulyadi.santosa@xxxxxxxxx>
• Re: [PATCH] fix mmap uninitialized warnings
  • From: Johannes Weiner <hannes@xxxxxxxxxxxx>
• [PATCH] fix mmap uninitialized warnings
  • From: Jaswinder Singh <jaswinder@xxxxxxxxxxxxx>
• Re: Bad page state at free_hot_cold_page
  • From: Johannes Weiner <hannes@xxxxxxxxxxxx>
• Re: Time loss after calling netif_rx() in a kernel thread
  • From: Lukas Razik <razik@xxxxxxxxxxxxxxxxxxx>
• Ethernet driver (MAC connected to switch instead of PHY)
  • From: "Rajat Jain" <Rajat.Jain@xxxxxxxxxxxx>
• Bad page state at free_hot_cold_page
  • From: "BJörn Lindqvist" <bjourne@xxxxxxxxx>
• Time loss after calling netif_rx() in a kernel thread
  • From: Lukas Razik <linux@xxxxxxxxxx>
• Re: IDT/Exception handling understanding - kernel vs userspace control path
  • From: "Mulyadi Santosa" <mulyadi.santosa@xxxxxxxxx>
• Re: a question on cr3
  • From: "Mulyadi Santosa" <mulyadi.santosa@xxxxxxxxx>
• Re: is the boot-time parm "root=/dev/nfs" actually necessary?
  • From: "karunakar rao" <karunakar.santhu@xxxxxxxxx>
• Re: is the boot-time parm "root=/dev/nfs" actually necessary?
  • From: Shaz <shazalive@xxxxxxxxx>
• Re: is the boot-time parm "root=/dev/nfs" actually necessary?
  • From: "Robert P. J. Day" <rpjday@xxxxxxxxxxxxxx>
• is the boot-time parm "root=/dev/nfs" actually necessary?
  • From: "Robert P. J. Day" <rpjday@xxxxxxxxxxxxxx>
• Re: Query on mm during initialization phase.
  • From: Asim <linkasim@xxxxxxxxx>
• Query on mm during initialization phase.
  • From: Asim <linkasim@xxxxxxxxx>
• Re: a question on cr3
  • From: "Peter Teoh" <htmldeveloper@xxxxxxxxx>
• Re: mmap() with an offset > 32 bits on a 32-bit CPU
  • From: Michael Blizek <michi1@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: mmap() with an offset > 32 bits on a 32-bit CPU
  • From: Abdul Basit <abasit@xxxxxxxxx>
• Re: How to check bottom half vs user context ?
  • From: Octavian Purdila <tavi@xxxxxxxxx>
• IDT/Exception handling understanding - kernel vs userspace control path
  • From: Peter Teoh <htmldeveloper@xxxxxxxxx>
• Re: mmap() with an offset > 32 bits on a 32-bit CPU
  • From: Michael Blizek <michi1@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: mmap() with an offset > 32 bits on a 32-bit CPU
  • From: Michael Blizek <michi1@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx>
• mmap() with an offset > 32 bits on a 32-bit CPU
  • From: Abdul Basit <abasit@xxxxxxxxx>
• Re: a question on cr3
  • From: "Mulyadi Santosa" <mulyadi.santosa@xxxxxxxxx>
• Re: How to check bottom half vs user context ?
  • From: Guo Hongruan <camelguo@xxxxxxxxx>
• Re: How to check bottom half vs user context ?
  • From: Rene Herman <rene.herman@xxxxxxxxxxxx>
• How to check bottom half vs user context ?
  • From: "Bruce Moffat" <bmoffat10@xxxxxxxxx>
• Re: Building external module
  • From: Adrian Bunk <bunk@xxxxxxxxxx>
• Re: Building external module
  • From: Shaz <shazalive@xxxxxxxxx>
• Re: Building external module
  • From: Adrian Bunk <bunk@xxxxxxxxxx>
• Re: Building external module
  • From: Adrian Bunk <bunk@xxxxxxxxxx>
• Re: Building external module
  • From: Shaz <shazalive@xxxxxxxxx>
• Re: Building external module
  • From: Shaz <shazalive@xxxxxxxxx>
• Re: Building external module
  • From: Shaz <shazalive@xxxxxxxxx>
• Building external module
  • From: Shaz <shazalive@xxxxxxxxx>
• Removal of inode in ext3 file system
  • From: "Eduardo Júnior" <ihtraum18@xxxxxxxxx>
• [PATCH] vicam: use request_firmware()
  • From: Jaswinder Singh <jaswinder@xxxxxxxxxxxxx>
• Re: Bootloader problems
  • From: "Peter Teoh" <htmldeveloper@xxxxxxxxx>
• Re: USB Gadget File System
  • From: "Sandeep K Sinha" <sandeepksinha@xxxxxxxxx>
• USB Gadget File System
  • From: mayank rana <mayank_rana_it@xxxxxxxxxxx>
• FW: Bootloader problems
  • From: "Welch, Martyn (GE EntSol, Intelligent Platforms)" <martyn.welch@xxxxxxxxxxx>
• Re: Bootloader problems
  • From: Matthias Kaehlcke <matthias@xxxxxxxxxxxx>
• Re: Bootloader problems
  • From: "Peter Teoh" <htmldeveloper@xxxxxxxxx>
• Re: Bootloader problems
  • From: Guo Hongruan <camelguo@xxxxxxxxx>
• Bootloader problems
  • From: Peter Teoh <htmldeveloper@xxxxxxxxx>
• Re: Kernel Booting Error
  • From: Michael Blizek <michi1@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Kernel Booting Error
  • From: Asim <linkasim@xxxxxxxxx>
• Re: where to put defines
  • From: Mark Brown <markb@xxxxxxxxxxxxxxxxxxxxx>
• Re: ext3 block numbers
  • From: Scott Lovenberg <scott.lovenberg@xxxxxxxxx>
• where to put defines
  • From: "Belisko Marek" <marek.belisko@xxxxxxxxx>
• Re: Printing huge information on serial console causes panic ?
  • From: Mark Brown <markb@xxxxxxxxxxxxxxxxxxxxx>
• Re: ext3 block numbers
  • From: "Stanisław T. Findeisen" <sf181257@xxxxxxxxxxxxxxxxxxxxx>
• Re: ext3 block numbers
  • From: Roy Butler <roy.butler@xxxxxxxxxxxx>
• Re: ext3 block numbers
  • From: "Manish Katiyar" <mkatiyar@xxxxxxxxx>
• Re: ext3 block numbers
  • From: "Greg Freemyer" <greg.freemyer@xxxxxxxxx>
• ext3 block numbers
  • From: "Stanisław T. Findeisen" <sf181257@xxxxxxxxxxxxxxxxxxxxx>
• Re: about the address of the variable
  • From: "karunakar rao" <karunakar.santhu@xxxxxxxxx>
• Re: is this list still functioning?
  • From: "Mulyadi Santosa" <mulyadi.santosa@xxxxxxxxx>
• Re: tracing early booting up of 64bit linux kernel
  • From: "Mulyadi Santosa" <mulyadi.santosa@xxxxxxxxx>
• RE: How to compile only single driver in kernel source
  • From: "Rajat Jain" <Rajat.Jain@xxxxxxxxxxxx>
• How to compile only single driver in kernel source
  • From: "Mitul Modi" <mituld.modi@xxxxxxxxx>
• Re: is this list still functioning?
  • From: "Frédéric Weisbecker" <f.weisbecker@xxxxxxxxx>
• Re: is this list still functioning?
  • From: "Rahul Ramasubramanian" <ramasubramanian.rahul@xxxxxxxxx>
• is this list still functioning?
  • From: "Robert P. J. Day" <rpjday@xxxxxxxxxxxxxx>
• Re: tracing early booting up of 64bit linux kernel
  • From: "Peter Teoh" <htmldeveloper@xxxxxxxxx>
• meaning of platform_driver_register
  • From: "Belisko Marek" <marek.belisko@xxxxxxxxx>
• Re: tracing early booting up of 64bit linux kernel
  • From: "Mulyadi Santosa" <mulyadi.santosa@xxxxxxxxx>
• some basic questions/observations about early userspace
  • From: "Robert P. J. Day" <rpjday@xxxxxxxxxxxxxx>
• what is the initial default root fs "mounted" to?
  • From: "Robert P. J. Day" <rpjday@xxxxxxxxxxxxxx>
• trying to clarify initrd vs initramfs vs neither
  • From: "Robert P. J. Day" <rpjday@xxxxxxxxxxxxxx>
• Re: about the address of the variable
  • From: "Steven Zhou" <lullaby2005@xxxxxxxxx>
• Re: Memory usage and /proc/meminfo question
  • From: Joris van Rantwijk <jorispubl@xxxxxxxxx>
• Re: Memory usage and /proc/meminfo question
  • From: "karunakar rao" <karunakar.santhu@xxxxxxxxx>
• Re: Memory usage and /proc/meminfo question
  • From: Joris van Rantwijk <jorispubl@xxxxxxxxx>
• Re: Memory usage and /proc/meminfo question
  • From: "karunakar rao" <karunakar.santhu@xxxxxxxxx>
• Re: about the address of the variable
  • From: Thomas Petazzoni <thomas.petazzoni@xxxxxxxxxxxxxxxxxx>
• Re: about the address of the variable
  • From: "Mayank Kaushik" <mayank.utexas@xxxxxxxxx>
• Re: Sound driver problem
  • From: Roman Mindalev <lists@xxxxxxxxx>
• Re: about the address of the variable
  • From: "karunakar rao" <karunakar.santhu@xxxxxxxxx>
• RE: Memory usage and /proc/meminfo question
  • From: "Li Xiaodong" <lixd@xxxxxxxxxxxxxx>
• Re: Memory usage and /proc/meminfo question
  • From: Joris van Rantwijk <jorispubl@xxxxxxxxx>
• Re: Printing huge information on serial console causes panic ?
  • From: "yogeshwar sonawane" <yogyas@xxxxxxxxx>
• Re: about the address of the variable
  • From: "Steven Zhou" <lullaby2005@xxxxxxxxx>
• about the address of the variable
  • From: "Steven Zhou" <lullaby2005@xxxxxxxxx>
• Re: about the address of the variable
  • From: Mark Brown <markb@xxxxxxxxxxxxxxxxxxxxx>
• RE: Memory usage and /proc/meminfo question
  • From: "Li Xiaodong" <lixd@xxxxxxxxxxxxxx>
• tracing early booting up of 64bit linux kernel
  • From: "Peter Teoh" <htmldeveloper@xxxxxxxxx>
• Sound driver problem
  • From: Shinoooo <shinukl1@xxxxxxxxx>
• Memory usage and /proc/meminfo question
  • From: Joris van Rantwijk <jorispubl@xxxxxxxxx>
• Marking inode dirty
  • From: "Manish Katiyar" <mkatiyar@xxxxxxxxx>
• [PATCH] Remove fdump tool for av7110 firmware
  • From: Jaswinder Singh <jaswinder@xxxxxxxxxxxxx>
• [PATCH] firmware: convert av7110 driver to request_firmware()
  • From: Jaswinder Singh <jaswinder@xxxxxxxxxxxxx>
• Re: Polling in kernel threads
  • From: Lukas Razik <linux@xxxxxxxxxx>
• Re: Printing huge information on serial console causes panic ?
  • From: Mark Brown <markb@xxxxxxxxxxxxxxxxxxxxx>
• Printing huge information on serial console causes panic ?
  • From: "yogeshwar sonawane" <yogyas@xxxxxxxxx>
• Re: About kernel 2.6.25.6 and sata150 discs
  • From: Erik Mouw <mouw@xxxxxxxxxxxx>
• Re: Help needed on bzImage
  • From: "Peter Teoh" <htmldeveloper@xxxxxxxxx>
• About kernel 2.6.25.6 and sata150 discs
  • From: Thomas Nitsch <thomas@xxxxxxxxxxx>
• test mail
  • From: "nidhi mittal" <nidhimittal19@xxxxxxxxx>
• Re: Use of CONFIG_X86_NO_TSS
  • From: "Peter Teoh" <htmldeveloper@xxxxxxxxx>
• Re: Polling in kernel threads
  • From: Johannes Weiner <hannes@xxxxxxxxxxxx>
• Re: Polling in kernel threads
  • From: Lukas Razik <linux@xxxxxxxxxx>
• Use of CONFIG_X86_NO_TSS
  • From: Asim <linkasim@xxxxxxxxx>
• Re: What is migrate memory pages?
  • From: "Peter Teoh" <htmldeveloper@xxxxxxxxx>
• Re: What is migrate memory pages?
  • From: "Peter Teoh" <htmldeveloper@xxxxxxxxx>
• Re: Polling in kernel threads
  • From: Johannes Weiner <hannes@xxxxxxxxxxxx>
• [PATCH] firmware: convert tg3 driver to request_firmware()
  • From: Jaswinder Singh <jaswinder@xxxxxxxxxxxxx>
• Re: Polling in kernel threads
  • From: Lukas Razik <linux@xxxxxxxxxx>
• Re: [PATCH] firmware: convert tg3 driver to request_firmware()
  • From: David Woodhouse <dwmw2@xxxxxxxxxxxxx>
• Re: [PATCH] firmware: convert tg3 driver to request_firmware()
  • From: Jeff Garzik <jeff@xxxxxxxxxx>
• Re: Polling in kernel threads
  • From: "karunakar rao" <karunakar.santhu@xxxxxxxxx>
• Phycore i.MX31 - eXecute-In-Place
  • From: Eugene Smirnoff <Eugene.Smirnoff@xxxxxxxxx>
• Re: Polling in kernel threads
  • From: "Mulyadi Santosa" <mulyadi.santosa@xxxxxxxxx>
• Re: Linux 2.6 Scheduling
  • From: "Nobin Mathew" <nobin.mathew@xxxxxxxxx>
• Re: Linux 2.6 Scheduling
  • From: Scott Lovenberg <scott.lovenberg@xxxxxxxxx>
• Linux 2.6 Scheduling
  • From: "Nobin Mathew" <nobin.mathew@xxxxxxxxx>
• Re: list of fuctions defined and exported by a library
  • From: "Peter Teoh" <htmldeveloper@xxxxxxxxx>
• Re: [PATCH] firmware: convert tg3 driver to request_firmware()
  • From: David Miller <davem@xxxxxxxxxxxxx>
• Re: [PATCH] firmware: convert tg3 driver to request_firmware()
  • From: David Woodhouse <dwmw2@xxxxxxxxxxxxx>
• Re: [PATCH] firmware: convert tg3 driver to request_firmware()
  • From: David Miller <davem@xxxxxxxxxxxxx>
• Re: [PATCH] firmware: convert tg3 driver to request_firmware()
  • From: David Woodhouse <dwmw2@xxxxxxxxxxxxx>
• Re: [PATCH] firmware: convert tg3 driver to request_firmware()
  • From: David Miller <davem@xxxxxxxxxxxxx>
• Re: [PATCH] firmware: convert tg3 driver to request_firmware()
  • From: David Miller <davem@xxxxxxxxxxxxx>
• Re: [PATCH] firmware: convert tg3 driver to request_firmware()
  • From: David Woodhouse <dwmw2@xxxxxxxxxxxxx>
• Re: [PATCH] firmware: convert tg3 driver to request_firmware()
  • From: David Woodhouse <dwmw2@xxxxxxxxxxxxx>
• Re: [PATCH] firmware: convert tg3 driver to request_firmware()
  • From: "David S. Miller" <davem@xxxxxxxxxx>
• Re: Containers - what are they?
  • From: "Peter Teoh" <htmldeveloper@xxxxxxxxx>
• Polling in kernel threads
  • From: Lukas Razik <linux@xxxxxxxxxx>
• Re: A interesting problem of C programming
  • From: Jose Celestino <japc@xxxxxxxxxx>
• Re: [PATCH] firmware: convert tg3 driver to request_firmware()
  • From: David Woodhouse <dwmw2@xxxxxxxxxxxxx>
• Re: Containers - what are they?
  • From: "Peter Teoh" <htmldeveloper@xxxxxxxxx>
• Re: Containers - what are they?
  • From: "Mulyadi Santosa" <mulyadi.santosa@xxxxxxxxx>
• Re: ioctl argument
  • From: Bernd Petrovitsch <bernd@xxxxxxxxx>
• ioctl argument
  • From: "Belisko Marek" <marek.belisko@xxxxxxxxx>
• Re: A interesting problem of C programming
  • From: shreeram <rs.shreeram@xxxxxxxxxxxxx>
• Re: A interesting problem of C programming
  • From: "vaibhav khatavkar" <khatavkarvaibhav86@xxxxxxxxx>
• Re: A interesting problem of C programming
  • From: Luciano Rocha <luciano@xxxxxxxxxxx>
• Re: A interesting problem of C programming
  • From: "Wang Yu" <wangyuict@xxxxxxxxx>
• Re: A interesting problem of C programming
  • From: "vaibhav khatavkar" <khatavkarvaibhav86@xxxxxxxxx>
• Re: A interesting problem of C programming
  • From: Bernd Petrovitsch <bernd@xxxxxxxxx>
• Re: A interesting problem of C programming
  • From: shreeram <rs.shreeram@xxxxxxxxxxxxx>
• Re: A interesting problem of C programming
  • From: "ershaad ahamed" <ershaad.a@xxxxxxxxx>
• Re: A interesting problem of C programming
  • From: "ajit mote" <mail2blackmen@xxxxxxxxx>
• A interesting problem of C programming
  • From: "Wang Yu" <wangyuict@xxxxxxxxx>
• Re: Containers - what are they?
  • From: Li Zefan <lizf@xxxxxxxxxxxxxx>
• Re: Containers - what are they?
  • From: "Mulyadi Santosa" <mulyadi.santosa@xxxxxxxxx>
• Re: What is migrate memory pages?
  • From: "Mulyadi Santosa" <mulyadi.santosa@xxxxxxxxx>
• Re: Containers - what are they?
  • From: Li Zefan <lizf@xxxxxxxxxxxxxx>
• Re: Containers - what are they?
  • From: "Mulyadi Santosa" <mulyadi.santosa@xxxxxxxxx>
• Re: Containers - what are they?
  • From: Li Zefan <lizf@xxxxxxxxxxxxxx>
• Building a module in a different folder
  • From: "Ian Brown" <ianbrn@xxxxxxxxx>
• What is migrate memory pages?
  • From: "Peter Teoh" <htmldeveloper@xxxxxxxxx>
• Containers - what are they?
  • From: "Peter Teoh" <htmldeveloper@xxxxxxxxx>
• Re: list of fuctions defined and exported by a library
  • From: Bernd Petrovitsch <bernd@xxxxxxxxx>
• Re: list of fuctions defined and exported by a library
  • From: "Rahul Ramasubramanian" <ramasubramanian.rahul@xxxxxxxxx>
• RE: list of fuctions defined and exported by a library
  • From: "Rajat Jain" <Rajat.Jain@xxxxxxxxxxxx>
• Re: list of fuctions defined and exported by a library
  • From: "Sandeep K Sinha" <sandeepksinha@xxxxxxxxx>
• Re: list of fuctions defined and exported by a library
  • From: Anupam Kapoor <anupam.kapoor@xxxxxxxxx>
• Re: Some basic questions about git
  • From: Anupam Kapoor <anupam.kapoor@xxxxxxxxx>
• Re: What is fixmaps?
  • From: "Mulyadi Santosa" <mulyadi.santosa@xxxxxxxxx>
• Re: list of fuctions defined and exported by a library
  • From: "Mulyadi Santosa" <mulyadi.santosa@xxxxxxxxx>
• Re: Help needed regarding Makefile os an external loadable module
  • From: Markus Heidelberg <markus.heidelberg@xxxxxx>
• Some basic questions about git
  • From: "Manish Katiyar" <mkatiyar@xxxxxxxxx>
• list of fuctions defined and exported by a library
  • From: "Rahul Ramasubramanian" <ramasubramanian.rahul@xxxxxxxxx>
• Re: Help needed on bzImage
  • From: Thomas Petazzoni <thomas.petazzoni@xxxxxxxxxxxxxxxxxx>
• Re: kmalloc causing kernel panic
  • From: Thomas Petazzoni <thomas.petazzoni@xxxxxxxxxxxxxxxxxx>
• Re: Deciphering Call Trace details
  • From: Thomas Petazzoni <thomas.petazzoni@xxxxxxxxxxxxxxxxxx>
• Re: create_proc_info_entry
  • From: Thomas Petazzoni <thomas.petazzoni@xxxxxxxxxxxxxxxxxx>
• Re: Linux kernel booting code flow.
  • From: "Mohamed Thalib .H" <h.mohamedthalib@xxxxxxxxxxxxx>
• FYI: persistent naming of USB serial devices
  • From: Erik Mouw <mouw@xxxxxxxxxxxx>
• Re: What is fixmaps?
  • From: "Steven Zhou" <lullaby2005@xxxxxxxxx>
• Re: Linux kernel booting code flow.
  • From: Hemanth Kumar <hemwire@xxxxxxxxxxx>
• Re: Linux kernel booting code flow.
  • From: "Daniel Baluta" <daniel.baluta@xxxxxxxxx>
• Re: Help needed on bzImage
  • From: "Sandeep K Sinha" <sandeepksinha@xxxxxxxxx>
• Re: kmalloc causing kernel panic
  • From: Guo Hongruan <camelguo@xxxxxxxxx>
• Help needed on bzImage
  • From: "Preeti Rani" <smartpreeti03@xxxxxxxxx>
• kmalloc causing kernel panic
  • From: jasjit singh <singh.jasjit@xxxxxxxxxxx>
• RE: Help needed regarding Makefile os an external loadable module
  • From: "Vivek Kumar Gupta" <gkvivek@xxxxxxxxx>
• Re: Help needed regarding Makefile os an external loadable module
  • From: pragnesh radadia <pgradadia@xxxxxxxxx>
• Help needed regarding Makefile os an external loadable module
  • From: "Veda Tripathi" <veda.trips@xxxxxxxxx>
• Re: __get_free_pages() internal
  • From: "Peter Teoh" <htmldeveloper@xxxxxxxxx>
• Re: initrd???????????
  • From: "Sandeep K Sinha" <sandeepksinha@xxxxxxxxx>
• Re: Modifying ext3
  • From: "Manish Katiyar" <mkatiyar@xxxxxxxxx>
• Re: What is fixmaps?
  • From: "Peter Teoh" <htmldeveloper@xxxxxxxxx>
• Re: Modifying ext3
  • From: "Alberto Giménez" <lagimenez@xxxxxxxxx>
• Re: What is fixmaps?
  • From: "Mulyadi Santosa" <mulyadi.santosa@xxxxxxxxx>
• Re: IRQ Affinity
  • From: Elad Lahav <elad_lahav@xxxxxxxxxxxxxxxxxxxxx>
• Re: initrd???????????
  • From: "Daniel Baluta" <daniel.baluta@xxxxxxxxx>
• initrd???????????
  • From: "vinoth kumar.r" <vinocit@xxxxxxxxx>
• Re: __get_free_pages() internal
  • From: "Peter Teoh" <htmldeveloper@xxxxxxxxx>
• What is fixmaps?
  • From: "Peter Teoh" <htmldeveloper@xxxxxxxxx>
• Re: __get_free_pages() internal
  • From: Rik van Riel <riel@xxxxxxxxxxx>
• __get_free_pages() internal
  • From: "Peter Teoh" <htmldeveloper@xxxxxxxxx>
• Re: IRQ Affinity
  • From: Scott Lovenberg <scott.lovenberg@xxxxxxxxx>
• Re: DMA Mapping
  • From: Guo Hongruan <camelguo@xxxxxxxxx>
• Modifying ext3
  • From: "Veda Tripathi" <veda.trips@xxxxxxxxx>
• Re: IRQ Affinity
  • From: Elad Lahav <elad_lahav@xxxxxxxxxxxxxxxxxxxxx>
• IRQ Affinity
  • From: Elad Lahav <elad_lahav@xxxxxxxxxxxxxxxxxxxxx>
• DMA Mapping
  • From: "jeyram jadenthradevan" <j.jeyram@xxxxxxxxx>
• Re: what is the use of --- try_module_get & module_put
  • From: "Mohamed Thalib .H" <h.mohamedthalib@xxxxxxxxxxxxx>
• Re: Linux kernel booting code flow.
  • From: "sahlot arvind" <asahlot@xxxxxxxxx>
• Re: what is the use of --- try_module_get & module_put
  • From: "Daniel Baluta" <daniel.baluta@xxxxxxxxx>
• what is the use of --- try_module_get & module_put
  • From: "Mohamed Thalib .H" <h.mohamedthalib@xxxxxxxxxxxxx>
• Re: Linux kernel booting code flow.
  • From: "Mohamed Thalib .H" <h.mohamedthalib@xxxxxxxxxxxxx>
• Re: iface in promiscuous mode
  • From: "Mauricio Mauad Menegaz Filho" <mmauad@xxxxxxxxx>
• iface in promiscuous mode
  • From: "guildivernos guildivernos" <guildivernos@xxxxxxxxx>
• Re: Deciphering Call Trace details
  • From: Bernd Schubert <bs@xxxxxxxxx>
• Re: Deciphering Call Trace details
  • From: Wenhua Zhao <whzhao@xxxxxxxxx>
• Re: Regarding Page Swap out
  • From: "sahlot arvind" <asahlot@xxxxxxxxx>
• Re: Linux kernel booting code flow.
  • From: "Mulyadi Santosa" <mulyadi.santosa@xxxxxxxxx>
• Re: Deciphering Call Trace details
  • From: "Mulyadi Santosa" <mulyadi.santosa@xxxxxxxxx>
• Re: Deciphering Call Trace details
  • From: Johannes Weiner <hannes@xxxxxxxxxxxx>
• Linux kernel booting code flow.
  • From: "Mohamed Thalib .H" <h.mohamedthalib@xxxxxxxxxxxxx>
• Deciphering Call Trace details
  • From: jasjit singh <singh.jasjit@xxxxxxxxxxx>
• Re: Regarding Page Swap out
  • From: Johannes Weiner <hannes@xxxxxxxxxxxx>
• Re: Regarding Page Swap out
  • From: Guo Hongruan <camelguo@xxxxxxxxx>
• Regarding Page Swap out
  • From: "sahlot arvind" <asahlot@xxxxxxxxx>
• Re: g_file_storage and ether driver USB
  • From: Greg KH <greg@xxxxxxxxx>
• Re: switching from long mode to compatibility mode
  • From: "tejas khatiwala" <socretez@xxxxxxxxx>
• Re: Building a module for different kernels on the same machine
  • From: Erik Mouw <mouw@xxxxxxxxxxxx>
• RE: Building a module for different kernels on the same machine
  • From: "Vivek Kumar Gupta" <gkvivek@xxxxxxxxx>
• Re: Building a module for different kernels on the same machine
  • From: Guo Hongruan <camelguo@xxxxxxxxx>
• Re: Building a module for different kernels on the same machine
  • From: Erik Mouw <mouw@xxxxxxxxxxxx>
• Building a module for different kernels on the same machine
  • From: "Ian Brown" <ianbrn@xxxxxxxxx>
• Re: set_capacity question
  • From: Thanos Makatos <mcatos@xxxxxxxxxxxx>
• Re: Machine hang - how to know what happens?
  • From: Patrick Kirsch <pkirsch@xxxxxxx>
• set_capacity question
  • From: Lal <learner.kernel@xxxxxxxxx>