Linux Kernel Newbies

Thread Index

Re: mmap info
- From: srinivas bakki <srinivas.bakki@xxxxxxxxx>
Re: Alsa..
- From: Erik Mouw <J.A.K.Mouw@xxxxxxxxxxxxxx>
Re: set_bit and clear_bit from asm386/bitops.h
- From: Erik Mouw <J.A.K.Mouw@xxxxxxxxxxxxxx>
Re: mmap info
- From: srinivas bakki <srinivas.bakki@xxxxxxxxx>
Re: mmap info
- From: "Anurag Verma" <averma@xxxxxxxxxxxxxxxxxxx>
Re: mmap info
- From: srinivas bakki <srinivas.bakki@xxxxxxxxx>
mmap info
- From: Anurag Verma <newanurag@xxxxxxxxx>
Checked flag of "my" pages
- From: Martin Jambor <jamborm@xxxxxxxxx>
Re: ioctl in a module - sending more than one paramter
- From: Sven Schuster <schuster.sven@xxxxxx>
ioctl in a module - sending more than one paramter
- From: John Que <qwejohn@xxxxxxxxx>
RTNETLINK
- From: warrier@xxxxxxxxxxx
Re: Floating Point Exception while insmod
- From: SDiZ <gmane@xxxxxxxx>
Re: nfsroot
- From: Abhishek Kumar <yaduabhi@xxxxxxxxx>
Alsa..
- From: "R.Kaushik Kumar" <kaukum@xxxxxxxxxxx>
Re: Using netlink for kernel -> userspace communication
- From: Christophe Lucas <clucas@xxxxxxxxxxxxx>
Using netlink for kernel -> userspace communication
- From: "Tan, Chiang Kang " <Chiang.Tan@xxxxxxxxxxxxxxx>
Re: set_bit and clear_bit from asm386/bitops.h
- From: ns srinivasa murthy <nsmurthy@xxxxxxxxxx>
Re: set_bit and clear_bit from asm386/bitops.h
- From: Erik Mouw <J.A.K.Mouw@xxxxxxxxxxxxxx>
Re: Floating Point Exception while insmod
- From: Erik Mouw <J.A.K.Mouw@xxxxxxxxxxxxxx>
Re: netlink sockets
- From: "MHD.Tayseer" <gilmour@xxxxxxxxxxx>
set_bit and clear_bit from asm386/bitops.h
- From: ns srinivasa murthy <nsmurthy@xxxxxxxxxx>
Floating Point Exception while insmod
- From: "Vijay Ram Chitrapu (RCVIJAYD)" <cvijay@xxxxxxxxxxxxxxxxxx>
Using netlink for kernel -> userspace communication
- From: "Tan, Chiang Kang " <Chiang.Tan@xxxxxxxxxxxxxxx>
RE: asmlinkage in system call
- From: "Sanjay Kumar, Noida" <sanjayku@xxxxxxxxxxx>
RE: asmlinkage in system call
- From: Anurag Verma <averma@xxxxxxxxxxxxxxxxxxx>
RE: asmlinkage in system call
- From: "Sanjay Kumar, Noida" <sanjayku@xxxxxxxxxxx>
asmlinkage in system call
- From: Anurag Verma <averma@xxxxxxxxxxxxxxxxxxx>
Re: Physical memory layout
- From: Fawad Lateef <fawadlateef@xxxxxxxxx>
Re: Physical memory layout
- From: Martin Jambor <jamborm@xxxxxxxxx>
Re: Physical memory layout
- From: Fawad Lateef <fawadlateef@xxxxxxxxx>
Re: unknown-block on start-up
- From: Michel Cunha <michelsouza@xxxxxxxxx>
RE: doubt regarding VMA
- From: "B Srinivas" <b.srinivas@xxxxxxxxxxxx>
Re: nfsroot
- From: Jim Cromie <jcromie@xxxxxxxxxx>
Re: regarding USB to serial data
- From: Greg Freemyer <greg.freemyer@xxxxxxxxx>
Re: Physical memory layout
- From: Thomas Petazzoni <thomas.petazzoni@xxxxxxxx>
Physical memory layout (was Re: skbuff->dev and sk_buff->input_dev)
- From: Thomas Petazzoni <thomas.petazzoni@xxxxxxxx>
Re: skbuff->dev and sk_buff->input_dev
- From: "Anurag Verma" <averma@xxxxxxxxxxxxxxxxxxx>
nfsroot
- From: Rahul T <gr8rahul@xxxxxxxxx>
Re: skbuff->dev and sk_buff->input_dev
- From: Hayim Shaul <hayim@xxxxxxxxxxxxxx>
RE: skbuff->dev and sk_buff->input_dev
- From: "Sanjay Kumar, Noida" <sanjayku@xxxxxxxxxxx>
Re: skbuff->dev and sk_buff->input_dev
- From: kdenki@xxxxxx
netlink sockets
- From: Jonathan Khoo <khoohuit@xxxxxxxxx>
Re: regarding USB to serial data
- From: Anurag Verma <averma@xxxxxxxxxxxxxxxxxxx>
skbuff->dev and sk_buff->input_dev
- From: Hayim Shaul <hayim@xxxxxxxxxxxxxx>
Re: unknown-block on start-up
- From: SDiZ <gmane@xxxxxxxx>
Re: _pa/virt_to_phys and __va/phys_to_virt
- From: Fawad Lateef <fawadlateef@xxxxxxxxx>
_pa/virt_to_phys and __va/phys_to_virt
- From: mark brown <markbrowni1000@xxxxxxxxx>
Re: How to understand PCI module?
- From: Raghu Vadapalli <iprsvp@xxxxxxxxx>
Re: unknown-block on start-up
- From: Greg Freemyer <greg.freemyer@xxxxxxxxx>
Re: unknown-block on start-up
- From: Pranav Peshwe <pranavpeshwe@xxxxxxxxx>
Re: unknown-block on start-up
- From: Michel Cunha <michelsouza@xxxxxxxxx>
Re: unknown-block on start-up
- From: Raghu Vadapalli <iprsvp@xxxxxxxxx>
Re: unknown-block on start-up
- From: Raghu Vadapalli <iprsvp@xxxxxxxxx>
Re: unknown-block on start-up
- From: Jim Cromie <jcromie@xxxxxxxxxx>
unknown-block on start-up
- From: Michel Cunha <michelsouza@xxxxxxxxx>
How to understand PCI module?
- From: "Bruce Yang" <quicktime2004@xxxxxxxxxxx>
Re: help regarding software interrupts
- From: Jim Cromie <jcromie@xxxxxxxxxx>
Re: FS get_block()
- From: Martin Jambor <jamborm@xxxxxxxxx>
Re: FS get_block()
- From: Martin Jambor <jamborm@xxxxxxxxx>
Re: Hi, About function calls.
- From: Martin Jambor <jamborm@xxxxxxxxx>
Re: Hi, About function calls.
- From: Abhishek Kumar <yaduabhi@xxxxxxxxx>
Re: Hi, About function calls.
- From: "MHD.Tayseer" <gilmour@xxxxxxxxxxx>
RE: help regarding software interrupts
- From: "Vijay Ram Chitrapu (RCVIJAYD)" <cvijay@xxxxxxxxxxxxxxxxxx>
FS get_block()
- From: "Jason J. Herne" <hernejj@xxxxxxxxxxxx>
Is there any papers on how sound card driver works?
- From: "Bruce Yang" <quicktime2004@xxxxxxxxxxx>
Hi, About function calls.
- From: "Bruce Yang" <quicktime2004@xxxxxxxxxxx>
Re: doubt regarding VMA
- From: Mulyadi Santosa <mulyadi.santosa@xxxxxxxxx>
Re: doubt regarding VMA
- From: Mulyadi Santosa <mulyadi.santosa@xxxxxxxxx>
Kernel crash with wake_up_interruptible in "simple" device driver....
- From: "Russell Markus" <rmarkus@xxxxxxxx>
Re: regarding USB to serial data
- From: Hemant Mohapatra <hemant.mohapatra@xxxxxxxxx>
Re: regarding USB to serial data
- From: Greg Freemyer <greg.freemyer@xxxxxxxxx>
Re: help regarding software interrupts
- From: Christophe Lucas <clucas@xxxxxxxxxxxxx>
RE: help regarding software interrupts
- From: "Aggarwal, Vikas \(OFT\)" <Vikas.Aggarwal@xxxxxxxxxxxxxxx>
Re: Virtual to physical address Translation
- From: "sri" <sri@xxxxxxxxxxxxxxxxxx>
Re: help regarding software interrupts
- From: "Vijay Ram Chitrapu (RCVIJAYD)" <cvijay@xxxxxxxxxxxxxxxxxx>
Re: help regarding software interrupts
- From: "sri" <sri@xxxxxxxxxxxxxxxxxx>
Re: help regarding software interrupts
- From: Thomas Petazzoni <thomas.petazzoni@xxxxxxxx>
Re: doubt regarding VMA
- From: Thomas Petazzoni <thomas.petazzoni@xxxxxxxx>
Re: doubt regarding VMA
- From: srinivas bakki <srinivas.bakki@xxxxxxxxx>
Re: help regarding software interrupts
- From: eliad lubovsky <eliadl@xxxxxxx>
Re: Virtual to physical address Translation
- From: eliad lubovsky <eliadl@xxxxxxx>
RE: help regarding software interrupts
- From: "Sachin Rane" <sachin.trane@xxxxxxxxx>
Re: help regarding software interrupts
- From: "Vijay Ram Chitrapu (RCVIJAYD)" <cvijay@xxxxxxxxxxxxxxxxxx>
Re: help regarding software interrupts
- From: "Vijay Ram Chitrapu (RCVIJAYD)" <cvijay@xxxxxxxxxxxxxxxxxx>
Re: Kdb help
- From: pradeep sawlani <pradep@xxxxxxxxx>
Re: Kdb help
- From: Thomas Petazzoni <thomas.petazzoni@xxxxxxxx>
Re: Virtual to physical address Translation
- From: Thomas Petazzoni <thomas.petazzoni@xxxxxxxx>
Re: help regarding software interrupts
- From: Thomas Petazzoni <thomas.petazzoni@xxxxxxxx>
Re: regarding USB to serial data
- From: Hemant Mohapatra <hemant.mohapatra@xxxxxxxxx>
Re: regarding USB to serial data
- From: Hemant Mohapatra <hemant.mohapatra@xxxxxxxxx>
Re: __setup macro?
- From: Clemens Buchacher <drizzd@xxxxxx>
Re: regarding USB to serial data
- From: Hemant Mohapatra <hemant.mohapatra@xxxxxxxxx>
Virtual to physical address Translation
- From: "sri" <sri@xxxxxxxxxxxxxxxxxx>
help regarding software interrupts
- From: "Vijay Ram Chitrapu (RCVIJAYD)" <cvijay@xxxxxxxxxxxxxxxxxx>
Re: doubt regarding VMA
- From: Ketan Mukadam <ketanm@xxxxxxxxx>
Re: doubt regarding VMA
- From: Mulyadi Santosa <mulyadi.santosa@xxxxxxxxx>
regarding USB to serial data
- From: Anurag Verma <averma@xxxxxxxxxxxxxxxxxxx>
Re: doubt regarding VMA
- From: Mulyadi Santosa <mulyadi.santosa@xxxxxxxxx>
Re: doubt regarding VMA
- From: Mulyadi Santosa <mulyadi.santosa@xxxxxxxxx>
Re: __setup macro?
- From: NAHieu <nahieu@xxxxxxxxx>
Re: Accessing ICH6 GPIO on linux
- From: Greg Freemyer <greg.freemyer@xxxxxxxxx>
Accessing ICH6 GPIO on linux
- From: Shiju Mathew <mshiju@xxxxxxxxx>
Re: Kdb help
- From: Jim Cromie <jcromie@xxxxxxxxxx>
Re: __setup macro?
- From: Clemens Buchacher <drizzd@xxxxxx>
__setup macro?
- From: NAHieu <nahieu@xxxxxxxxx>
Re: Kdb help
- From: Abhishek Kumar <yaduabhi@xxxxxxxxx>
Re: Kdb help
- From: "sri" <sri@xxxxxxxxxxxxxxxxxx>
Re: Kdb help
- From: Anurag Verma <averma@xxxxxxxxxxxxxxxxxxx>
Re: How to make a system call of my own
- From: Manik Venkat <manik_kern@xxxxxxxxx>
Re: Kdb help
- From: Meenal Gupta <meenaldgupta@xxxxxxxxx>
How to make a system call of my own
- From: Meenal Gupta <meenaldgupta@xxxxxxxxx>
Why can down_write() inside lock_kernel() ?
- From: Tetsuo Handa <from-kernelnewbies@xxxxxxxxxxxxxxxxxxx>
Re: insmod error
- From: Wieland Gmeiner <e8607062@xxxxxxxxxxxxxxxxxxxx>
Re: insmod error
- From: Vinay Kalkoti <kalkoti.vinay@xxxxxxxxx>
Re: insmod error
- From: Ketan Mukadam <ketanm@xxxxxxxxx>
Re: doubt regarding VMA
- From: Ketan Mukadam <ketanm@xxxxxxxxx>
Re: doubt regarding VMA
- From: srinivas bakki <srinivas.bakki@xxxxxxxxx>
Re: Module Configuration
- From: Christophe Lucas <clucas@xxxxxxxxxxxxx>
klm
- From: Anurag Verma <averma@xxxxxxxxxxxxxxxxxxx>
Kdb help
- From: Rahul T <gr8rahul@xxxxxxxxx>
RE: Re: Jiffies
- From: "Sanjay Kumar, Noida" <sanjayku@xxxxxxxxxxx>
Re: Req Java /Embedded proff for Chennai
- From: Karthik Subramanian <karthik301176@xxxxxxxxx>
Re: doubt regarding VMA
- From: Mulyadi Santosa <mulyadi.santosa@xxxxxxxxx>
Re: Interrupt Context
- From: Mulyadi Santosa <mulyadi.santosa@xxxxxxxxx>
Fwd: Re: Jiffies
- From: "R.Kaushik Kumar" <kaukum@xxxxxxxxxxx>
Re: doubt regarding VMA
- From: Raghu Vadapalli <iprsvp@xxxxxxxxx>
Re: doubt regarding VMA
- From: William J Beksi <wjbeksi@xxxxxxxxxxx>
Re: Interrupt Context
- From: Gaurav Dhiman <gaurav4lkg@xxxxxxxxx>
Re: insmod error
- From: Gaurav Dhiman <gaurav4lkg@xxxxxxxxx>
Re: insmod error
- From: Gaurav Dhiman <gaurav4lkg@xxxxxxxxx>
Re: System call registration mess
- From: Clemens Buchacher <clemens.buchacher@xxxxxxxxxxxxxxx>
Re: Module Configuration
- From: Greg KH <greg@xxxxxxxxx>
doubt regarding VMA
- From: Raj <rajagopalan.duraisamy@xxxxxxxxx>
Re: what does owner "32" mean?
- From: Jim Cromie <jcromie@xxxxxxxxxx>
Re: kernel panic
- From: Christophe Lucas <clucas@xxxxxxxxxxxxx>
Re: Module Configuration
- From: Hemant Mohapatra <hemant.mohapatra@xxxxxxxxx>
Re: Module Configuration
- From: Christophe Lucas <clucas@xxxxxxxxxxxxx>
Module Configuration
- From: Can Sar <csar@xxxxxxxxxxxx>
Re: Jiffies
- From: Wieland Gmeiner <e8607062@xxxxxxxxxxxxxxxxxxxx>
kernel panic
- From: srinivas bakki <srinivas.bakki@xxxxxxxxx>
Re: Jiffies
- From: Nish Aravamudan <nish.aravamudan@xxxxxxxxx>
Re: what does owner "32" mean?
- From: Jose Barroca <jose.barroca@xxxxxxxxxx>
RE: insmod error
- From: "Ashish Kumar Verma, Noida" <ashishv@xxxxxxxxxxx>
System call registration mess
- From: Wieland Gmeiner <e8607062@xxxxxxxxxxxxxxxxxxxx>
module dependencies in Kconfigs
- From: Jim Cromie <jcromie@xxxxxxxxxx>
Re: Jiffies
- From: Tetsuo Handa <from-kernelnewbies@xxxxxxxxxxxxxxxxxxx>
Jiffies
- From: "R.Kaushik Kumar" <kaukum@xxxxxxxxxxx>
insmod error
- From: Sarang Radke <radke.s@xxxxxxxxx>
Re: Interrupt Context
- From: Ketan Mukadam <ketanm@xxxxxxxxx>
Re: conflicts with kernels 2.6.11 and 2.4.18
- From: Arjan van de Ven <arjan@xxxxxxxxxxxxx>
How are swap_cache_info.noent_race, swap_cache_info.exist_race incremented?
- From: Learner <ruxyz@xxxxxxxxx>
Re: segmentation fault in "top" command
- From: Rik van Riel <riel@xxxxxxxxxxx>
Re: Interrupt Context
- From: Rik van Riel <riel@xxxxxxxxxxx>
Re: what does owner "32" mean?
- From: Hinko Kocevar <hinko.kocevar@xxxxxxxxxxxxxxx>
conflicts with kernels 2.6.11 and 2.4.18
- From: "Cristina Rivera" <cris_apricot@xxxxxxxxxxx>
what does owner "32" mean?
- From: Jose Barroca <jose.barroca@xxxxxxxxxx>
segmentation fault in "top" command
- From: Jose Barroca <jose.barroca@xxxxxxxxxx>
Re: Current Pointer and interrupt processing
- From: Rahul Iyer <idlisambar@xxxxxxxxx>
Interrupt Context
- From: Karane Mariano Vieira <karane@xxxxxxxxx>
Re: makefile help
- From: "K.R. Foley" <kr@xxxxxxxxxx>
RE: makefile help
- From: "Ashish Kumar Verma, Noida" <ashishv@xxxxxxxxxxx>
makefile help
- From: Rahul T <gr8rahul@xxxxxxxxx>
Re: Understanding LD script?
- From: Thomas Petazzoni <thomas.petazzoni@xxxxxxxx>
Understanding LD script?
- From: NAHieu <nahieu@xxxxxxxxx>
RE: kdb help
- From: "Ashish Kumar Verma, Noida" <ashishv@xxxxxxxxxxx>
Re: PCI reset
- From: Christophe Lucas <clucas@xxxxxxxxxxxxx>
kdb help
- From: Rahul T <gr8rahul@xxxxxxxxx>
How to understand the following CDROM driver codes?
- From: "Bruce Yang" <quicktime2004@xxxxxxxxxxx>
Re: PCI reset
- From: Jim Cromie <jcromie@xxxxxxxxxx>
Re: Current Pointer and interrupt processing
- From: Ketan Mukadam <ketanm@xxxxxxxxx>
Re: Current Pointer and interrupt processing
- From: Tobias Klauser <tklauser@xxxxxxxxxxx>
Current Pointer and interrupt processing
- From: Deepak Joshi <deepak_cins@xxxxxxxxxxx>
Re: kernel compilation error
- From: Abhishek Kumar <yaduabhi@xxxxxxxxx>
Re: Behaviour of kernel memory allocation
- From: Rik van Riel <riel@xxxxxxxxxxx>
How could I call some driver function directly
- From: "Bruce Yang" <quicktime2004@xxxxxxxxxxx>
PCI reset
- From: "Steve Iribarne" <steve.iribarne@xxxxxxxxxxxxxxxxxxxxx>
Re: How to understand ioctl for CD-ROM
- From: Erik Mouw <J.A.K.Mouw@xxxxxxxxxxxxxx>
How to understand ioctl for CD-ROM
- From: "Bruce Yang" <quicktime2004@xxxxxxxxxxx>
Re: How to build binary to another directory in 2.4
- From: Erik Mouw <J.A.K.Mouw@xxxxxxxxxxxxxx>
Re: 2.4.20 compile problem
- From: Erik Mouw <J.A.K.Mouw@xxxxxxxxxxxxxx>
How to build binary to another directory in 2.4
- From: wuulong <wuulong@xxxxxxxxx>
Re: signal
- From: Jan Hudec <bulb@xxxxxx>
Re: kernel compilation error
- From: Jan Hudec <bulb@xxxxxx>
Re: What is going on? Why is nobody handling this terrible spam situation??
- From: Jan Hudec <bulb@xxxxxx>
Re: sleep process, wait queues
- From: Jan Hudec <bulb@xxxxxx>
2.4.20 compile problem
- From: Rahul T <gr8rahul@xxxxxxxxx>
Re: kernel compilation error
- From: Hemant Mohapatra <hemant.mohapatra@xxxxxxxxx>
Behaviour of kernel memory allocation
- From: Xiangfei Jia <xjianz@xxxxxxxxx>
kernel compilation error
- From: Anurag Verma <averma@xxxxxxxxxxxxxxxxxxx>
Re: Req Java /Embedded proff for Chennai
- From: Erik Mouw <J.A.K.Mouw@xxxxxxxxxxxxxx>
Re: signal
- From: Gaurav Dhiman <gaurav4lkg@xxxxxxxxx>
RE: sleep process, wait queues
- From: "Sanjay Kumar, Noida" <sanjayku@xxxxxxxxxxx>
Re: Req Java /Embedded proff for Chennai
- From: Erik Mouw <J.A.K.Mouw@xxxxxxxxxxxxxx>
Re: Req Java /Embedded proff for Chennai
- From: Christophe Lucas <clucas@xxxxxxxxxxxxx>
Req Java /Embedded proff for Chennai
- From: "Adonis Consulting" <adonis_chn@xxxxxxxxxxxxxxxxx>
signal
- From: Anurag Verma <averma@xxxxxxxxxxxxxxxxxxx>
Re: kernel error
- From: Hemant Mohapatra <hemant.mohapatra@xxxxxxxxx>
Re: What is going on? Why is nobody handling this terrible spam situation??
- From: "Usman S. Ansari" <uansari@xxxxxxxxx>
Re: What is going on? Why is nobody handling this terrible spam situation??
- From: Timur Tabi <timur.tabi@xxxxxxxxxxx>
Re: kernel error
- From: Hemant Mohapatra <hemant.mohapatra@xxxxxxxxx>
kernel error
- From: "Cristina Rivera" <cris_apricot@xxxxxxxxxxx>
Re: kdb patch for kernel 2.6.0
- From: Erik Mouw <J.A.K.Mouw@xxxxxxxxxxxxxx>
Re: how to mount & format disk (ramdisk) in ramfs
- From: William J Beksi <wjbeksi@xxxxxxxxxxx>
how to mount & format disk (ramdisk) in ramfs
- From: hari krishnan <p.harikrishnan22@xxxxxxxxx>
How are swap_cache_info.noent_race, swap_cache_info.exist_race incremented?
- From: "Nate, Greg" <Greg_Nate@xxxxxxx>
Re: sleep process, wait queues
- From: Gaurav Dhiman <gaurav4lkg@xxxxxxxxx>
RE: Finding out FS type of a file
- From: "Steve Iribarne" <steve.iribarne@xxxxxxxxxxxxxxxxxxxxx>
Finding out FS type of a file
- From: Can Sar <csar@xxxxxxxxxxxx>
kdb patch for kernel 2.6.0
- From: Rahul T <gr8rahul@xxxxxxxxx>
Re: What is going on? Why is nobody handling this terrible spam situation??
- From: "K.R. Foley" <kr@xxxxxxxxxx>
Networking controm from C sources
- From: Garcia Jérémie <GARCIAJ@xxxxxx>
Re: What is going on? Why is nobody handling this terrible spam situation??
- From: Colin Leroy <colin@xxxxxxxxxx>
Re: What is going on? Why is nobody handling this terrible spam situation??
- From: "Usman S. Ansari" <uansari@xxxxxxxxx>
Re: What is going on? Why is nobody handling this terrible spam situation??
- From: Sanjar Jalilov <sanjal@xxxxxxxxxx>
Re: What is going on? Why is nobody handling this terrible spam situation??
- From: Rik van Riel <riel@xxxxxxxxxxx>
Re: What is going on? Why is nobody handling this terrible spam situation??
- From: Erik Mouw <J.A.K.Mouw@xxxxxxxxxxxxxx>
What is going on? Why is nobody handling this terrible spam situation??
- From: "Geula Stoliar" <geulas@xxxxxxxxxxxxxxx>
resolving a kbuild conflict - in-kernel vs module
- From: Jim Cromie <jcromie@xxxxxxxxxx>
Re: sleep process, wait queues
- From: Mattia Dongili <malattia@xxxxxxxxx>
Re: sleep process, wait queues
- From: Deepak Joshi <deepak_cins@xxxxxxxxxxx>
Re: sleep process, wait queues
- From: Zeeshan Ali <zeenix@xxxxxxxxx>
sleep process, wait queues
- From: Deepak Joshi <deepak_cins@xxxxxxxxxxx>
blk_size[][]???
- From: Xiangfei Jia <xjianz@xxxxxxxxx>
Re: current->uid is zero ?!
- From: Mattia Dongili <malattia@xxxxxxxxx>
Re: current->uid is zero ?!
- From: Mattia Dongili <malattia@xxxxxxxxx>
Re: current->uid is zero ?!
- From: "MHD.Tayseer" <gilmour@xxxxxxxxxxx>
Re: current->uid is zero ?!
- From: Mattia Dongili <malattia@xxxxxxxxx>
d_instantiate(dentry, inode) makes a kernel bug
- From: "MHD.Tayseer" <gilmour@xxxxxxxxxxx>
current->uid is zero ?!
- From: "MHD.Tayseer" <gilmour@xxxxxxxxxxx>
Re: KernelNewbies Wikki
- From: Tyler <tyler@xxxxxxxx>
Re: KernelNewbies Wikki
- From: Hemant Mohapatra <hemant.mohapatra@xxxxxxxxx>
help
- From: sundeep kumar <sundeepkumar1@xxxxxxxxxxx>
RE: KernelNewbies Wikki
- From: "Vishwas Manral" <Vishwas@xxxxxxxxxx>
Re: KernelNewbies Wikki
- From: Hemant Mohapatra <hemant.mohapatra@xxxxxxxxx>
RE: KernelNewbies Wikki
- From: "Sanjay Kumar, Noida" <sanjayku@xxxxxxxxxxx>
Nano dev Fs
- From: Tyler <tyler@xxxxxxxx>
Re: Questions about a block driver???
- From: Fawad Lateef <fawadlateef@xxxxxxxxx>
Questions about a block driver???
- From: Xiangfei Jia <xjianz@xxxxxxxxx>
KernelNewbies Wikki
- From: Tyler <tyler@xxxxxxxx>
RE: Linux question , please help a newbie!
- From: "Sanjay Kumar, Noida" <sanjayku@xxxxxxxxxxx>
Re: Get number of CPU?
- From: Ratnadeep Joshi <ratn.josh@xxxxxxxxx>
Re: Time IO spent by processes
- From: Rik van Riel <riel@xxxxxxxxxxx>
Re: Time IO spent by processes
- From: Eduardo Bezerra <edubezval@xxxxxxxxx>
Regarding Netfilter kernel code wrt firewalling rules
- From: "Kathy KN (HK)" <kathy.kn@xxxxxxxxx>
Re: Linux question , please help a newbie!
- From: "lk" <linux_kernel@xxxxxxxxx>
Re: Time IO spent by processes
- From: Rik van Riel <riel@xxxxxxxxxxx>
Re: utime and stime task_struct fields
- From: Clemens Buchacher <clemens.buchacher@xxxxxxxxxxxxxxx>
Load average /proc/loadstat updates?
- From: Lene Karter <karter_c@xxxxxxxx>
Time IO spent by processes
- From: Eduardo Bezerra <edubezval@xxxxxxxxx>
utime and stime task_struct fields
- From: Eduardo Bezerra <edubezval@xxxxxxxxx>
Re: Get number of CPU?
- From: NAHieu <nahieu@xxxxxxxxx>
Re: Programing the [Eject] button on CD-ROM
- From: Yu Wang <xiaohuwang@xxxxxxxxxxx>
RE: Programing the [Eject] button on CD-ROM
- From: "Aggarwal, Vikas \(OFT\)" <Vikas.Aggarwal@xxxxxxxxxxxxxxx>
Re: Programing the [Eject] button on CD-ROM
- From: Yu Wang <xiaohuwang@xxxxxxxxxxx>
Linux question , please help a newbie!
- From: Garcia Jérémie <GARCIAJ@xxxxxx>
Re: Programing the [Eject] button on CD-ROM
- From: aq <aquynh@xxxxxxxxx>
RE: Programing the [Eject] button on CD-ROM
- From: "Ashish Kumar Verma, Noida" <ashishv@xxxxxxxxxxx>
Re: /sbin/init & pxeboot
- From: Tetsuo Handa <from-kernelnewbies@xxxxxxxxxxxxxxxxxxx>
Programing the [Eject] button on CD-ROM
- From: Yu Wang <xiaohuwang@xxxxxxxxxxx>
Re: Get number of CPU?
- From: NAHieu <nahieu@xxxxxxxxx>
Re: Get number of CPU?
- From: Tetsuo Handa <from-kernelnewbies@xxxxxxxxxxxxxxxxxxx>
Re: Get number of CPU?
- From: NAHieu <nahieu@xxxxxxxxx>
Re: Get number of CPU?
- From: Tetsuo Handa <from-kernelnewbies@xxxxxxxxxxxxxxxxxxx>
Re: Get number of CPU?
- From: Grob Team <grobteam@xxxxxxxxx>
Re: Get number of CPU?
- From: Grob Team <grobteam@xxxxxxxxx>
Get number of CPU?
- From: NAHieu <nahieu@xxxxxxxxx>
Re: Time statistics of process
- From: Mike Tyson <mike@xxxxxxxxxxxxx>
Re: Time statistics of process
- From: Mulyadi Santosa <mulyadi.santosa@xxxxxxxxx>
Re: Time statistics of process
- From: Mike Tyson <mike@xxxxxxxxxxxxx>
/sbin/init & pxeboot
- From: kanji linux <kanjilinux@xxxxxxxxx>
Time statistics of process
- From: Michel Cunha <michelsouza@xxxxxxxxx>
Re: RLove's Linux Kernel Development, 2ed
- From: Bob Bennett <Robert.Bennett@xxxxxx>
RLove's Linux Kernel Development, 2ed
- From: Aman Wardak <aman.wardak@xxxxxxxxx>
Re: how to write info to a pci device
- From: sauro <sauro@xxxxxxxxxxx>
Re: Re: About Internal Fragmentation
- From: Bob Bennett <Robert.Bennett@xxxxxx>
still having problems with X windows
- From: "Cristina Rivera" <cris_apricot@xxxxxxxxxxx>
Re: about buddy and slab allocators
- From: "Lin Chun-Zhi" <lcz90@xxxxxxxxxxxxx>
Re: about buddy and slab allocators
- From: Gopala Krishna <gopalakrishna.n.m@xxxxxxxxx>
Re: about buddy and slab allocators
- From: Xiangfei Jia <xjianz@xxxxxxxxx>
Re: Re: About Internal Fragmentation
- From: Mulyadi Santosa <mulyadi.santosa@xxxxxxxxx>
Re[2]: how to write info to a pci device
- From: Bora SAHIN <borasahin@xxxxxxxxxxx>
Re: it is possible to EXPORT_SYMBOL a static function !
- From: Gaurav Dhiman <gaurav4lkg@xxxxxxxxx>
it is possible to EXPORT_SYMBOL a static function !
- From: Jim Cromie <jcromie@xxxxxxxxxx>
Re: is module initialization serialized ?
- From: Gaurav Dhiman <gaurav4lkg@xxxxxxxxx>
Re: Taking semaphores
- From: Tim Bird <tim.bird@xxxxxxxxxxx>
Re: About Internal Fragmentation
- From: Kuncoro Irawan <timeshuang@xxxxxxxxx>
Re: about buddy and slab allocators
- From: "lk" <linux_kernel@xxxxxxxxx>
About Internal Fragmentation
- From: Kuncoro Irawan <timeshuang@xxxxxxxxx>
Re: about buddy and slab allocators
- From: Jim Cromie <jcromie@xxxxxxxxxx>
Re: about buddy and slab allocators
- From: Bora SAHIN <borasahin@xxxxxxxxxxx>
Re: Finding kernel version from within a program
- From: Momchil Velikov <velco@xxxxxxxxx>
Finding kernel version from within a program
- From: "Geula Stoliar" <geulas@xxxxxxxxxxxxxxx>
RE: Taking semaphores
- From: "Vishwas Manral" <Vishwas@xxxxxxxxxx>
Re: is module initialization serialized ?
- From: Jim Cromie <jcromie@xxxxxxxxxx>
is module initialization serialized ?
- From: Jim Cromie <jcromie@xxxxxxxxxx>
Re: kmalloc max allocation size, netlink max buffer zise
- From: Jim Bauer <jfbauer@xxxxxxx>
Re: Taking semaphores
- From: Tim Bird <tim.bird@xxxxxxxxxxx>
Re: Taking semaphores
- From: Jim Cromie <jcromie@xxxxxxxxxx>
Re: Taking semaphores
- From: Jirka Kosina <jikos@xxxxxxxx>
Re: how to write info to a pci device
- From: Eric Clément <clement.eric@xxxxxxxxx>
Re: kmalloc max allocation size, netlink max buffer zise
- From: "MHD.Tayseer" <gilmour@xxxxxxxxxxx>
Re: how to write info to a pci device
- From: Eric Clément <clement.eric@xxxxxxxxx>
Re: how to write info to a pci device
- From: Eric Clément <clement.eric@xxxxxxxxx>
Re: sharing a lock between unrelated modules ? [PATCH, RFC]
- From: Jim Cromie <jcromie@xxxxxxxxxx>
Re: how to write info to a pci device
- From: Jim Cromie <jcromie@xxxxxxxxxx>
Re: how to write info to a pci device
- From: Christophe Lucas <clucas@xxxxxxxxxxxxx>
Re: how to write info to a pci device
- From: Eric Clément <clement.eric@xxxxxxxxx>
Taking semaphores
- From: "Vishwas Manral" <Vishwas@xxxxxxxxxx>
about buddy and slab allocators
- From: Xiangfei Jia <xjianz@xxxxxxxxx>
Re: how to write info to a pci device
- From: Christophe Lucas <clucas@xxxxxxxxxxxxx>
Re: problems with x windows and compiling kernel
- From: Nir Tzachar <tzachar@xxxxxxxxxxxx>
Re: Changing the desination address in kernel mode netfilter hook
- From: rajat swarup <rajats@xxxxxxxxx>
Re: kmalloc max allocation size, netlink max buffer zise
- From: Vinay Kalkoti <kalkoti.vinay@xxxxxxxxx>
problems with x windows and compiling kernel
- From: "Cristina Rivera" <cris_apricot@xxxxxxxxxxx>
kmalloc max allocation size, netlink max buffer zise
- From: "MHD.Tayseer" <gilmour@xxxxxxxxxxx>
Re: How to get process name from pid?
- From: Vinay Kalkoti <kalkoti.vinay@xxxxxxxxx>
Re: sharing a lock between unrelated modules ? [PATCH, RFC]
- From: Greg KH <greg@xxxxxxxxx>
Re: sharing a lock between unrelated modules ? [PATCH, RFC]
- From: Jim Cromie <jcromie@xxxxxxxxxx>
Re: How to get process name from pid?
- From: Jim Cromie <jcromie@xxxxxxxxxx>
how to write info to a pci device
- From: Eric Clément <clement.eric@xxxxxxxxx>
kernel capabilities
- From: Eric Clément <clement.eric@xxxxxxxxx>
Re: How to get process name from pid?
- From: Hareesh Nagarajan <hareesh@xxxxxxxxxx>
How to get process name from pid?
- From: Hareesh Nagarajan <hareesh@xxxxxxxxxx>
Re: sharing a lock between unrelated modules ? [PATCH, RFC]
- From: Bob Bennett <Robert.Bennett@xxxxxx>
Re: sharing a lock between unrelated modules ? [PATCH, RFC]
- From: Jim Cromie <jcromie@xxxxxxxxxx>
Re: sharing a lock between unrelated modules ? [PATCH, RFC]
- From: Bob Bennett <Robert.Bennett@xxxxxx>
Re: sharing a lock between unrelated modules ? [PATCH, RFC]
- From: Jim Cromie <jcromie@xxxxxxxxxx>
Re: Re: questions about segment and its relationship with TLS/NPTL
- From: Gaurav Dhiman <gaurav4lkg@xxxxxxxxx>
Re: Re: questions about segment and its relationship with TLS/NPTL
- From: Mulyadi Santosa <mulyadi.santosa@xxxxxxxxx>
Re: how to insert an asm instruction in C code and how to compile it
- From: Thomas Petazzoni <thomas.petazzoni@xxxxxxxx>
Re: how to insert an asm instruction in C code and how to compile it
- From: k8 s <uint32@xxxxxxxxx>
Re: New kernel project
- From: Tim Bird <tim.bird@xxxxxxxxxxx>
New kernel project
- From: Egry Gábor <gaboregry@xxxxxxxxxxx>
how to insert an asm instruction in C code and how to compile it
- From: "Srinivas G." <srinivasg@xxxxxxxxxxxxxxxxxxxxx>
Re: questions about segment and its relationship with TLS/NPTL
- From: Thomas Petazzoni <thomas.petazzoni@xxxxxxxx>
Re: questions about segment and its relationship with TLS/NPTL
- From: Christophe Lucas <clucas@xxxxxxxxxxxxx>
Re: Re: insmod: Invalid module format (2.6.4-52-default, gcc-3.3.3)
- From: Mulyadi Santosa <mulyadi.santosa@xxxxxxxxx>
Learning media files?
- From: Nikola Vlahović <root.admin1@xxxxxxxxxxx>
Re: insmod: Invalid module format (2.6.4-52-default, gcc-3.3.3)
- From: "MHD.Tayseer" <gilmour@xxxxxxxxxxx>
Re: [RFC] cpufreq event driver (aka my first lkm)
- From: Mattia Dongili <malattia@xxxxxxxxx>
[RFC] cpufreq event driver (aka my first lkm)
- From: Mattia Dongili <malattia@xxxxxxxxx>
Re: insmod: Invalid module format (2.6.4-52-default, gcc-3.3.3)
- From: Hemant Mohapatra <hemant.mohapatra@xxxxxxxxx>
Re: insmod: Invalid module format (2.6.4-52-default, gcc-3.3.3)
- From: "MHD.Tayseer" <gilmour@xxxxxxxxxxx>
sharing a lock between unrelated modules ?
- From: Jim Cromie <jcromie@xxxxxxxxxx>
Re: insmod: Invalid module format (2.6.4-52-default, gcc-3.3.3)
- From: Hemant Mohapatra <hemant.mohapatra@xxxxxxxxx>
Changing the desination address in kernel mode netfilter hook
- From: "John Que" <qwejohn@xxxxxxxxxxx>
Re: TUN/TAP/character device read()/write() performance
- From: Hayim Shaul <hayim@xxxxxxxxxxxxxx>
Re: insmod: Invalid module format (2.6.4-52-default, gcc-3.3.3)
- From: "MHD.Tayseer" <gilmour@xxxxxxxxxxx>
insmod: Invalid module format (2.6.4-52-default, gcc-3.3.3)
- From: Hemant Mohapatra <hemant.mohapatra@xxxxxxxxx>
skb_recv_datagram blocks forever!
- From: "MHD.Tayseer Alqouatli" <gilmour@xxxxxxxxxxx>
Thread Group Leader
- From: Can Sar <csar@xxxxxxxxxxxx>
questions about segment and its relationship with TLS/NPTL
- From: Mulyadi Santosa <mulyadi.santosa@xxxxxxxxx>
How to identify cow (copy-on-write) pages during kernel execution?
- From: Mauricio Lin <mauriciolin2000@xxxxxxxxxxxx>
http://www.kernelnewbies.org/scripts/
- From: jason bishop <jbishop@xxxxxxxxxxxx>
Re: How to wait child process termination?
- From: Tetsuo Handa <from-kernelnewbies@xxxxxxxxxxxxxxxxxxx>
Re: TUN/TAP/character device read()/write() performance
- From: Mike Tyson <mike@xxxxxxxxxxxxx>
Variable-size user/kernel shared buffers
- From: Mike Tyson <mike@xxxxxxxxxxxxx>
Re: Kernel-userspace shared mutex
- From: Mike Tyson <mike@xxxxxxxxxxxxx>
Re: Another question
- From: Tim Bird <tim.bird@xxxxxxxxxxx>
Re: Another question
- From: Jim Cromie <jcromie@xxxxxxxxxx>
Re: TUN/TAP/character device read()/write() performance
- From: Mike Tyson <mike@xxxxxxxxxxxxx>
Re: Another question
- From: Nish Aravamudan <nish.aravamudan@xxxxxxxxx>
Re: Another question
- From: Arlen Nascimento <arlen.nascimento@xxxxxxxxx>
Re: Another question
- From: Nish Aravamudan <nish.aravamudan@xxxxxxxxx>
Another question
- From: Arlen Nascimento <arlen.nascimento@xxxxxxxxx>
'Root over NFS' problem in setting up
- From: swapzap <swapnilspatil@xxxxxxxxx>
Re: printk
- From: Rahul Iyer <idlisambar@xxxxxxxxx>
Re: printk
- From: Gaurav Dhiman <gaurav4lkg@xxxxxxxxx>
printk
- From: Arlen Nascimento <arlen.nascimento@xxxxxxxxx>
Re: Problem using O_DIRECT
- From: Erik Mouw <J.A.K.Mouw@xxxxxxxxxxxxxx>
Re: How to wait child process termination?
- From: Erik Mouw <J.A.K.Mouw@xxxxxxxxxxxxxx>
How to wait child process termination?
- From: Tetsuo Handa <from-kernelnewbies@xxxxxxxxxxxxxxxxxxx>
Re: Kernel-userspace shared mutex
- From: Vikesh <vikesh.raj@xxxxxxxxx>
TUN/TAP/character device read()/write() performance
- From: Mike Tyson <mike@xxxxxxxxxxxxx>
Re: Kernel-userspace shared mutex
- From: Mike Tyson <mike@xxxxxxxxxxxxx>
Re: Kernel-userspace shared mutex
- From: Tyler <tyler@xxxxxxxx>
Re: How to replace a kernel built-in function
- From: Shrinand Javadekar <shri.javadekar@xxxxxxxxx>
IO queue in the kernel
- From: Karane Mariano Vieira <karane@xxxxxxxxx>
Re: Does the copy-on-write usually happen on application startup?
- From: Jim Cromie <jcromie@xxxxxxxxxx>
Problem using O_DIRECT
- From: linuxprodigy linuxprodigy <linux.prodigy@xxxxxxxxx>
Re: Does the copy-on-write usually happen on application startup?
- From: Mauricio Lin <mauriciolin2000@xxxxxxxxxxxx>
Kernel-userspace shared mutex
- From: Mike Tyson <mike@xxxxxxxxxxxxx>
netlink nlmsg_type interpretation
- From: "MHD.Tayseer Alqouatli" <gilmour@xxxxxxxxxxx>
Re: Does the copy-on-write usually happen on application startup?
- From: Jim Cromie <jcromie@xxxxxxxxxx>
Re: Does the copy-on-write usually happen on application startup?
- From: Rik van Riel <riel@xxxxxxxxxxx>
Re: How to replace a kernel built-in function
- From: Rik van Riel <riel@xxxxxxxxxxx>
Time of the process, when it waits for IO
- From: Karane Mariano Vieira <karane@xxxxxxxxx>
Re: Does the copy-on-write usually happen on application startup?
- From: Jim Cromie <jcromie@xxxxxxxxxx>
Does the copy-on-write usually happen on application startup?
- From: Mauricio Lin <mauriciolin2000@xxxxxxxxxxxx>
Re: I need some small kernel projects
- From: "Pedro I. Sanchez" <psanchez@xxxxxxxxxx>
promiscuous and netfilters
- From: Hayim Shaul <hayim@xxxxxxxxxxxxxx>
I need some small kernel projects
- From: Erik Larsson <erik@xxxxxxxxxxxxx>
Re: How to replace a kernel built-in function
- From: Xiangfei Jia <xjianz@xxxxxxxxx>
Re: How to replace a kernel built-in function
- From: Shrinand Javadekar <shri.javadekar@xxxxxxxxx>
Re: How to replace a kernel built-in function
- From: Jim Cromie <jcromie@xxxxxxxxxx>
Re: How to replace a kernel built-in function
- From: Viswanath T Reddy <t_viswanath_reddy@xxxxxxxxxxx>
Re: How to replace a kernel built-in function
- From: Rahul Iyer <idlisambar@xxxxxxxxx>
Re: User context/Kernel context interaction
- From: Jim Cromie <jcromie@xxxxxxxxxx>
Re: User context/Kernel context interaction
- From: "MHD.Tayseer Alqouatli" <gilmour@xxxxxxxxxxx>
Re: User context/Kernel context interaction
- From: Erik Mouw <J.A.K.Mouw@xxxxxxxxxxxxxx>
User context/Kernel context interaction
- From: "MHD.Tayseer Alqouatli" <gilmour@xxxxxxxxxxx>
panic : "Aiee, killing interrupt handler!" in net/core/dev.c.
- From: "John Que" <qwejohn@xxxxxxxxxxx>
Re: How to replace a kernel built-in function
- From: Shrinand Javadekar <shri.javadekar@xxxxxxxxx>
Re: Re: how to forcefully remove the module from the kernel?
- From: "vaishali paisal" <vaishalipaisal@xxxxxxxxxxxxxx>
Re: Are there shared copy-on-write pages?
- From: "lk" <linux_kernel@xxxxxxxxx>
Re: How to replace a kernel built-in function
- From: Arjan van de Ven <arjan@xxxxxxxxxxxxx>
RE: Are there shared copy-on-write pages?
- From: Thekkedath Gopakumar-agt026 <gopakumar.t@xxxxxxxxxxxx>
Re: how to forcefully remove the module from the kernel?
- From: vijay kalkoti <vijayck@xxxxxxxxx>
Re: Why need the Global Descriptor Table in the kernel?
- From: srinivas bakki <srinivas.bakki@xxxxxxxxx>
How to replace a kernel built-in function
- From: Xiangfei Jia <xjianz@xxxxxxxxx>
Re: Are there shared copy-on-write pages?
- From: Rik van Riel <riel@xxxxxxxxxxx>
Re: Are there shared copy-on-write pages?
- From: Jim Cromie <jcromie@xxxxxxxxxx>
Re: Are there shared copy-on-write pages?
- From: Jim Bauer <jfbauer@xxxxxxx>
/proc/kcore lseek file operation
- From: Youssef Hmamouche <hyoussef@xxxxxxxxx>
Re: Are there shared copy-on-write pages?
- From: Mauricio Lin <mauriciolin2000@xxxxxxxxxxxx>
Re: Is file deleted imidiately after firing rm command?
- From: Martin Jambor <jamborm@xxxxxxxxx>
Re: Summer Of Code / kernel related projects
- From: Rik van Riel <riel@xxxxxxxxxxx>
Re: Summer Of Code / kernel related projects
- From: "Bill Rugolsky Jr." <brugolsky@xxxxxxxxxxxxxxxxxxxxxxxxx>
Re: Summer Of Code / kernel related projects
- From: kanji linux <kanjilinux@xxxxxxxxx>
Summer Of Code / kernel related projects
- From: Rik van Riel <riel@xxxxxxxxxxx>
Re: Are there shared copy-on-write pages?
- From: "lk" <linux_kernel@xxxxxxxxx>
Are there shared copy-on-write pages?
- From: Mauricio Lin <mauriciolin2000@xxxxxxxxxxxx>
What would you like to have in a new IPC infrastucture?
- From: Maurizio Monge <maurizio.monge@xxxxxxxxx>
Re: ..about PCI configuration space..
- From: Greg KH <greg@xxxxxxxxx>
..about PCI configuration space..
- From: sushil mayengbam <kernel_hooker@xxxxxxxxx>
RE: Intercepting unlink system call
- From: "Singh, Ajay" <ajaysingh@xxxxxx>
Re: Kernel compilation problem
- From: S Ashok <sashok@xxxxxxxxxxxxx>
Re: Why need the Global Descriptor Table in the kernel?
- From: "lk" <linux_kernel@xxxxxxxxx>
Re: Intercepting unlink system call
- From: S Ashok <sashok@xxxxxxxxxxxxx>
Intercepting unlink system call
- From: "Dipti Pawar" <dipti.pawar@xxxxxxxxx>
Kernel compilation problem
- From: pavan <pavan@xxxxxxxxxxxxxx>
Re: Help in Writing a Network Device
- From: S Ashok <sashok@xxxxxxxxxxxxx>
Re: Is file deleted imidiately after firing rm command?
- From: Jim Cromie <jcromie@xxxxxxxxxx>
Re: mm doc for 2.6.10???
- From: Xiangfei Jia <xjianz@xxxxxxxxx>
RE: Is file deleted imidiately after firing rm command?
- From: "Dipti Pawar" <dipti.pawar@xxxxxxxxx>
Help in Writing a Network Device
- From: Vanitha Ramaswami <vanitha@xxxxxxxxxxxxxxxxx>
Re: mm doc for 2.6.10???
- From: Martin Jambor <jamborm@xxxxxxxxx>
Re: mm doc for 2.6.10???
- From: Jim Cromie <jcromie@xxxxxxxxxx>
Re: mm doc for 2.6.10???
- From: Tim Bird <tim.bird@xxxxxxxxxxx>
mm doc for 2.6.10???
- From: Xiangfei Jia <xjianz@xxxxxxxxx>
Re: virt_to_phys - what am I doing wrong?
- From: Tim Bird <tim.bird@xxxxxxxxxxx>
Re: virt_to_phys - what am I doing wrong?
- From: Arjan van de Ven <arjanv@xxxxxxxxxx>
Re: virt_to_phys - what am I doing wrong?
- From: Tim Bird <tim.bird@xxxxxxxxxxx>
RE: virt_to_phys - what am I doing wrong?
- From: "Woodruff, Richard" <r-woodruff2@xxxxxx>
Re: virt_to_phys - what am I doing wrong?
- From: Tony Lindgren <tony@xxxxxxxxxxx>
RE: virt_to_phys - what am I doing wrong?
- From: "Woodruff, Richard" <r-woodruff2@xxxxxx>
Re: virt_to_phys - what am I doing wrong?
- From: Jim Bauer <jfbauer@xxxxxxx>
virt_to_phys - what am I doing wrong?
- From: Tim Bird <tim.bird@xxxxxxxxxxx>
Re: Kgdb over ethernet - Where is the patch?
- From: Tyler <tyler@xxxxxxxx>
Will 2.6.x work with gcc sys-include of 2.4.22
- From: Om <omanakuttan@xxxxxxx>
Re: Is file deleted imidiately after firing rm command?
- From: Jim Bauer <jfbauer@xxxxxxx>
Kgdb over ethernet - Where is the patch?
- From: Andre Luiz da Silva <andrack@xxxxxxxxx>
Re: Why need the Global Descriptor Table in the kernel?
- From: srinivas bakki <srinivas.bakki@xxxxxxxxx>
Re: What are the underlying system calls for rm command?
- From: Raseel Bhagat <rabhagat@xxxxxxxxxx>
Re: Is file deleted imidiately after firing rm command?
- From: Viswanath T Reddy <t_viswanath_reddy@xxxxxxxxxxx>
Re: What are the underlying system calls for rm command?
- From: MNH <mnh.zone@xxxxxxxxx>
What are the underlying system calls for rm command?
- From: "Dipti Pawar" <dipti.pawar@xxxxxxxxx>
Re: Is file deleted imidiately after firing rm command?
- From: Vinay Kalkoti <kalkoti.vinay@xxxxxxxxx>
extending max. limit on routing table
- From: akumar@xxxxxxxxxxxxxxxxxx
Is file deleted imidiately after firing rm command?
- From: "Dipti Pawar" <dipti.pawar@xxxxxxxxx>
Re: Why need the Global Descriptor Table in the kernel?
- From: Martin Jambor <jamborm@xxxxxxxxx>
dates of docs in documents/kdoc/
- From: Jim Cromie <jcromie@xxxxxxxxxx>
ABout container_of macro
- From: kanji linux <kanjilinux@xxxxxxxxx>
Re: kernel compilation question
- From: "lk" <linux_kernel@xxxxxxxxx>
Re: forcing a crash dump
- From: Learner <ruxyz@xxxxxxxxx>
forcing a crash dump
- From: Jared Greenwald <greenwaldjared@xxxxxxxxx>
kernel compilation question
- From: pavan <pavan@xxxxxxxxxxxxxx>
extending max. limit of routing tables
- From: akumar@xxxxxxxxxxxxxxxxxx
Re: Why need the Global Descriptor Table in the kernel?
- From: Xiangfei Jia <xjianz@xxxxxxxxx>
Re: Why need the Global Descriptor Table in the kernel?
- From: "lk" <linux_kernel@xxxxxxxxx>
Re: inode::rename post conditions
- From: "MHD.Tayseer Alqouatli" <gilmour@xxxxxxxxxxx>
Why need the Global Descriptor Table in the kernel?
- From: Xiangfei Jia <xjianz@xxxxxxxxx>
Re: How to get CPU consumption?
- From: Rik van Riel <riel@xxxxxxxxxxx>
Re: A small change in the scheduler
- From: Rik van Riel <riel@xxxxxxxxxxx>
Re: How to get CPU consumption?
- From: Jim Cromie <jcromie@xxxxxxxxxx>
RE: How to get CPU consumption?
- From: "Steve Iribarne" <steve.iribarne@xxxxxxxxxxxxxxxxxxxxx>
Re: candidate patch for -stable
- From: Greg KH <greg@xxxxxxxxx>
Re: candidate patch for -stable
- From: Jim Cromie <jcromie@xxxxxxxxxx>
Re: External module assembler output.
- From: Timur Tabi <timur.tabi@xxxxxxxxxxx>
Re: candidate patch for -stable
- From: Greg KH <greg@xxxxxxxxx>
Re: candidate patch for -stable
- From: Greg KH <greg@xxxxxxxxx>
candidate patch for -stable
- From: Jim Cromie <jcromie@xxxxxxxxxx>
Re: External module assembler output.
- From: jbi130@xxxxxxxxx
Re: External module assembler output.
- From: Jim Cromie <jcromie@xxxxxxxxxx>
External module assembler output.
- From: jbi130@xxxxxxxxx
Re: inode::rename post conditions
- From: Tyler <tyler@xxxxxxxx>
insmod: unresolved symbol printk
- From: "jhoney jhoney" <jhoney_joney@xxxxxxxxxxxxxx>
dumping/restoring memory questions
- From: Vincenzo Mallozzi <vinjunior@xxxxxxxx>
inode::rename post conditions
- From: "MHD.Tayseer Alqouatli" <gilmour@xxxxxxxxxxx>
Re: Alsa Documentation....
- From: Greg KH <greg@xxxxxxxxx>
Re: Alsa Documentation....
- From: "R.Kaushik Kumar" <kaukum@xxxxxxxxxxx>
Re: Alsa Documentation....
- From: Greg KH <greg@xxxxxxxxx>
Alsa Documentation....
- From: "R.Kaushik Kumar" <kaukum@xxxxxxxxxxx>
Kernel threads vs set_cpus_allowed()
- From: "Abhinkar, Sameer" <sameer.abhinkar@xxxxxxxxx>
Re: How to get CPU consumption?
- From: Jim Cromie <jcromie@xxxxxxxxxx>
Re: How to get CPU consumption?
- From: lnx lnx <lynux_05@xxxxxxxxx>
Re: Netlink Socket
- From: Greg KH <greg@xxxxxxxxx>
Re: Netlink Socket
- From: Jim Cromie <jcromie@xxxxxxxxxx>
Re: Netlink Socket
- From: Greg KH <greg@xxxxxxxxx>
Re: How to get CPU consumption?
- From: Jim Cromie <jcromie@xxxxxxxxxx>
Re: Netlink Socket
- From: Jim Cromie <jcromie@xxxxxxxxxx>
How to get CPU consumption?
- From: Karane Mariano Vieira <karane@xxxxxxxxx>
Re: Netlink Socket
- From: Bob Bennett <Robert.Bennett@xxxxxx>
Re: Netlink Socket
- From: Jim Cromie <jcromie@xxxxxxxxxx>
Re: boot command line length 256 ? 1024 ?
- From: Jim Cromie <jcromie@xxxxxxxxxx>
Re: boot command line length 256 ? 1024 ?
- From: Raseel Bhagat <rabhagat@xxxxxxxxxx>
Re: boot command line length 256 ? 1024 ?
- From: Raseel Bhagat <rabhagat@xxxxxxxxxx>
Re: Difference between dentry and directory?
- From: Xiangfei Jia <xjianz@xxxxxxxxx>
Re: A small change in the scheduler
- From: Antonio Mancina <a.mancina@xxxxxxxx>
Re: Difference between dentry and directory?
- From: "lk" <linux_kernel@xxxxxxxxx>
RE: Intercepting unlink system cal
- From: "Gaurav Khurana" <Gaurav.Khurana@xxxxxxxxxxxxxxxxx>
Re: Intercepting unlink system call
- From: Mandeep Sandhu <Mandeep_Sandhu@xxxxxxxxxxx>
Re: How to run user level program in modules
- From: Greg KH <greg@xxxxxxxxx>
Netlink Socket
- From: "Dipti Pawar" <dipti.pawar@xxxxxxxxx>
RE: How to run user level program in modules
- From: "Dipti Pawar" <dipti.pawar@xxxxxxxxx>
Re: Difference between dentry and directory?
- From: Martin Jambor <jamborm@xxxxxxxxx>
Bug in block_write_full_page (fs/buffer.c)?
- From: Martin Jambor <jamborm@xxxxxxxxx>
Difference between dentry and directory?
- From: Xiangfei Jia <xjianz@xxxxxxxxx>
Re: Adding a new system call
- From: Karane Mariano Vieira <karane@xxxxxxxxx>
Re: Adding a new system call
- From: Omar <omar68@xxxxxxxxx>
boot command line length 256 ? 1024 ?
- From: Jim Cromie <jcromie@xxxxxxxxxx>
Re: How to run user level program in modules
- From: "Vikas Aggarwal" <va824363@xxxxxxxxxx>
Re: How to run user level program in modules
- From: Greg KH <greg@xxxxxxxxx>
How to run user level program in modules
- From: "Dipti Pawar" <dipti.pawar@xxxxxxxxx>
Adding a new system call
- From: Karane Mariano Vieira <karane@xxxxxxxxx>
Re: segfault while trying to upgrade kernel module to 2.6 char-dev-driver API
- From: Jim Cromie <jcromie@xxxxxxxxxx>
Re: Intercepting unlink system cal
- From: Arjan van de Ven <arjan@xxxxxxxxxxxxx>
Re: Intercepting unlink system cal
- From: Gaurav Dhiman <gaurav4lkg@xxxxxxxxx>
Re: Interaction between user and kernel space
- From: Christophe Lucas <clucas@xxxxxxxxxxxxx>
Re: Kernel Compilation
- From: Jan Hudec <bulb@xxxxxx>
Intercepting unlink system cal
- From: "Dipti Pawar" <dipti.pawar@xxxxxxxxx>
Fw: RE: About register constraint in gcc inline assembly
- From: "Lin Chun-Zhi" <lcz90@xxxxxxxxxxxxx>
Re: Interaction between user and kernel space
- From: Thomas Petazzoni <thomas.petazzoni@xxxxxxxx>
Re: Interaction between user and kernel space
- From: Christophe Lucas <clucas@xxxxxxxxxxxxx>
Re: Intercepting unlink system call
- From: Bob Bennett <Robert.Bennett@xxxxxx>
module-init-tools for PPC embedded linux
- From: "Vikas Aggarwal" <va824363@xxxxxxxxxx>
Re: Intercepting unlink system call
- From: Gaurav Dhiman <gaurav4lkg@xxxxxxxxx>
Re: A small change in the scheduler
- From: Karane Mariano Vieira <karane@xxxxxxxxx>
Re: Intercepting unlink system call
- From: Prasanth S <prasanth.000@xxxxxxxxx>
Re: Associating driver to the existing device
- From: Gaurav Dhiman <gaurav4lkg@xxxxxxxxx>
Intercepting unlink system call
- From: "Dipti Pawar" <dipti.pawar@xxxxxxxxx>
Kernel Compilation
- From: durga reddy <sysatus@xxxxxxxxx>
Re: static modules compilation
- From: Jan Hudec <bulb@xxxxxx>
static modules compilation
- From: pavan <pavan@xxxxxxxxxxxxxx>
Re: A small change in the scheduler
- From: Anupam Kapoor <anupam.kapoor@xxxxxxxxx>
Re: A small change in the scheduler
- From: Karane Mariano Vieira <karane@xxxxxxxxx>
Re: Clean kernel thread termination
- From: Tyler <tyler@xxxxxxxx>
Re: Clean kernel thread termination
- From: Colin Leroy <colin@xxxxxxxxxx>
Interaction between user and kernel space
- From: Thomas Petazzoni <thomas.petazzoni@xxxxxxxx>
Clean kernel thread termination
- From: Thomas Petazzoni <thomas.petazzoni@xxxxxxxx>
Kernel timers...delay not introduced after 9th ack
- From: Pradeep Anbumani <pradeepdreams@xxxxxxxxx>
Re: __init vs __devinit for non? hotplug device
- From: Greg KH <greg@xxxxxxxxx>
Re: Help! linux on usb memory
- From: Greg KH <greg@xxxxxxxxx>
bio->bi_private
- From: Martin Jambor <jamborm@xxxxxxxxx>
Re[2]: Help on radeon driver
- From: Bora SAHIN <borasahin@xxxxxxxxxxx>
Re: Re: How to catch a signal in kernel module
- From: Bob Bennett <Robert.Bennett@xxxxxx>
Re: Associating driver to the existing device
- From: Tyler <tyler@xxxxxxxx>
floppy device driver
- From: Anurag Verma <newanurag@xxxxxxxxx>
Re: module not loaded at runtime
- From: "dineshkumarb@xxxxxxxxx" <dineshkumarb@xxxxxxxxx>
Re: module not loaded at runtime
- From: William J Beksi <wjbeksi@xxxxxxxxxxx>
module not loaded at runtime
- From: pavan <pavan@xxxxxxxxxxxxxx>
Re: Help on radeon driver
- From: Bora SAHIN <borasahin@xxxxxxxxxxx>
Re: Associating driver to the existing device
- From: Vishal Linux <vishal.linux@xxxxxxxxx>
Re: Associating driver to the existing device
- From: Vishal Linux <vishal.linux@xxxxxxxxx>
Re: A small change in the scheduler
- From: Anurag Verma <newanurag@xxxxxxxxx>
Re: A small change in the scheduler
- From: Anurag Verma <newanurag@xxxxxxxxx>
Re: A small change in the scheduler
- From: Jim Cromie <jcromie@xxxxxxxxxx>
Re: A small change in the scheduler
- From: Anurag Verma <newanurag@xxxxxxxxx>
__init vs __devinit for non? hotplug device
- From: Jim Cromie <jcromie@xxxxxxxxxx>
Re: Associating driver to the existing device
- From: Arjan van de Ven <arjan@xxxxxxxxxxxxx>
Re: Associating driver to the existing device
- From: Tyler <tyler@xxxxxxxx>
Re: A small change in the scheduler
- From: Karane Mariano Vieira <karane@xxxxxxxxx>
Re: Associating driver to the existing device
- From: Jim Cromie <jcromie@xxxxxxxxxx>
Re: A small change in the scheduler
- From: Bahadir Balban <bahadir.balban@xxxxxxxxx>
Re: Associating driver to the existing device
- From: Tyler <tyler@xxxxxxxx>
Re: segfault while trying to upgrade kernel module to 2.6 char-dev-driver API
- From: Jim Cromie <jcromie@xxxxxxxxxx>
segfault while trying to upgrade kernel module to 2.6 char-dev-driver API
- From: Jim Cromie <jcromie@xxxxxxxxxx>
krenel panic
- From: "vaishali paisal" <vaishalipaisal@xxxxxxxxxxxxxx>
Re: Associating driver to the existing device
- From: Vishal Linux <vishal.linux@xxxxxxxxx>
Re: Associating driver to the existing device
- From: Mandeep Sandhu <Mandeep_Sandhu@xxxxxxxxxxx>
Re: Associating driver to the existing device
- From: Vishal Linux <vishal.linux@xxxxxxxxx>
Re: Associating driver to the existing device
- From: Mandeep Sandhu <Mandeep_Sandhu@xxxxxxxxxxx>
Associating driver to the existing device
- From: Vishal Linux <vishal.linux@xxxxxxxxx>
Re: Port Number in Packet filter
- From: Octavian Purdila <tavi@xxxxxxxxx>
Re: A small change in the scheduler
- From: Anurag Verma <newanurag@xxxxxxxxx>
Re: A small change in the scheduler
- From: Rik van Riel <riel@xxxxxxxxxxx>
Re: A small change in the scheduler
- From: Karane Mariano Vieira <karane@xxxxxxxxx>
A small change in the scheduler
- From: Karane Mariano Vieira <karane@xxxxxxxxx>
Re: Re: How Kernel module
- From: Gaurav Dhiman <gaurav4lkg@xxxxxxxxx>
Re: Port Number in Packet filter
- From: Sven Schuster <schuster.sven@xxxxxx>
Re: Port Number in Packet filter
- From: Zeeshan Ali <zeenix@xxxxxxxxx>
Port Number in Packet filter
- From: kulkarni abhi <abhi_kernel@xxxxxxxxx>
Help! linux on usb memory
- From: Peter Rusedski <peter_istanbul@xxxxxxxxx>
Re: Re: How Kernel module
- From: Mandeep Sandhu <Mandeep_Sandhu@xxxxxxxxxxx>
Re: Re: How Kernel module
- From: "jhoney jhoney" <jhoney_joney@xxxxxxxxxxxxxx>
Re: kernel memory usage
- From: Rik van Riel <riel@xxxxxxxxxxx>
Re: Re: How to catch a signal in kernel module
- From: "Nivedan Nigam" <nivedan_nigam@xxxxxxxxxxxxxx>
Re: Process of developing the linux kernel
- From: randy_dunlap <rdunlap@xxxxxxxxxxxx>
Re: How to catch a signal in kernel module
- From: Bob Bennett <Robert.Bennett@xxxxxx>
kernel memory usage
- From: cranium2003 <cranium2003@xxxxxxxxx>
Re: Questions on VMA
- From: Catalin Marinas <catalin.marinas@xxxxxxx>
Questions on VMA
- From: Raj <rajagopalan.duraisamy@xxxxxxxxx>
How to catch a signal in kernel module
- From: "Nivedan Nigam" <nivedan_nigam@xxxxxxxxxxxxxx>
About register constraint in gcc inline assembly
- From: "Roach" <lcz90@xxxxxxxxxxxxx>
Re: Re: gdb for kernel debugging
- From: Vasu S <vasu.ss@xxxxxxxxx>
can a sock_sendmsg be done inside the timer expiry function?
- From: "vaishali paisal" <vaishalipaisal@xxxxxxxxxxxxxx>
Re: Re: how to forcefully remove the module from the kernel?
- From: "vaishali paisal" <vaishalipaisal@xxxxxxxxxxxxxx>
Re: how to forcefully remove the module from the kernel?
- From: Manish Regmi <regmi.manish@xxxxxxxxx>
Re: malloc > 3Gb
- From: Arjan van de Ven <arjan@xxxxxxxxxxxxx>
malloc > 3Gb
- From: Vikram <vvikram@xxxxxxxxxxxx>
Re: Re: Re: how to forcefully remove the module from the kernel?
- From: Gaurav Dhiman <gaurav4lkg@xxxxxxxxx>
Re: Re: Re: how to forcefully remove the module from the kernel?
- From: Mandeep Sandhu <Mandeep_Sandhu@xxxxxxxxxxx>
Re: Re: Re: how to forcefully remove the module from the kernel?
- From: "vaishali paisal" <vaishalipaisal@xxxxxxxxxxxxxx>
Linux Scheduler
- From: Antonio Mancina <a.mancina@xxxxxxxx>
Re: Re: how to forcefully remove the module from the kernel?
- From: Gaurav Dhiman <gaurav4lkg@xxxxxxxxx>
Re: Re: how to forcefully remove the module from the kernel?
- From: Mandeep Sandhu <Mandeep_Sandhu@xxxxxxxxxxx>
Re: Re: how to forcefully remove the module from the kernel?
- From: "vaishali paisal" <vaishalipaisal@xxxxxxxxxxxxxx>
Re: examine bss and data segments
- From: Christophe Lucas <clucas@xxxxxxxxxxxxx>
Re: how to forcefully remove the module from the kernel?
- From: Mandeep Sandhu <Mandeep_Sandhu@xxxxxxxxxxx>
how to forcefully remove the module from the kernel?
- From: "vaishali paisal" <vaishalipaisal@xxxxxxxxxxxxxx>
AW: Unresolved symbol
- From: "Markus Ullmann" <markus.ullmann@xxxxxxxxxxxxxxxxxxxx>
Re: Install script question
- From: Jim Cromie <jcromie@xxxxxxxxxx>
kernel singleton creation service ?
- From: Jim Cromie <jcromie@xxxxxxxxxx>
Install script question
- From: "Suneel Kandru" <suneel.kandru@xxxxxxxxxxxxxxxxxxx>
examine bss and data segments
- From: Priya <snailkarma@xxxxxxxxx>
Re: Unresolved symbol
- From: Gaurav Dhiman <gaurav4lkg@xxxxxxxxx>
Re: How Kernel module
- From: Gaurav Dhiman <gaurav4lkg@xxxxxxxxx>
Re: Build question
- From: Harsha Srinath <harsha@xxxxxxx>
Build question
- From: "Steve Iribarne" <steve.iribarne@xxxxxxxxxxxxxxxxxxxxx>
Mapping pages
- From: Sandeep Tyagi <sandeepktyagi@xxxxxxxxx>
Changing d_name from dirent in getdents64
- From: Shrinand Javadekar <shri.javadekar@xxxxxxxxx>
Re: Loading or unloading the module prgramtically
- From: Colin Leroy <colin@xxxxxxxxxx>
Re: Loading or unloading the module prgramtically
- From: Razvan DEACONESCU <razvand@xxxxxxxxxxxxxxxxxx>
Re: Loading or unloading the module prgramtically
- From: Katharina Denkinger <tina@xxxxxxxxxxx>
Re: How Kernel module
- From: Anurag Verma <newanurag@xxxxxxxxx>
Re: Loading or unloading the module prgramtically
- From: William J Beksi <wjbeksi@xxxxxxxxxxxxxxxxxxxxx>
Loading or unloading the module prgramtically
- From: "Suneel Kandru" <suneel.kandru@xxxxxxxxxxxxxxxxxxx>
Re: distinguishing console and terminal devices
- From: Bahadir Balban <bahadir.balban@xxxxxxxxx>
hi
- From: swapna nallaballe <swapna_9n@xxxxxxxxxxx>
Unresolved symbol
- From: "Markus Ullmann" <markus.ullmann@xxxxxxxxxxxxxxxxxxxx>
Re: How Kernel module
- From: Jim Bauer <jfbauer@xxxxxxx>
distinguishing console and terminal devices
- From: Bahadir Balban <bahadir.balban@xxxxxxxxx>
Help on radeon driver
- From: "subramanyam" <ysm@xxxxxxxxxxxxx>
Re: Kernel usage time
- From: Erik Mouw <J.A.K.Mouw@xxxxxxxxxxxxxx>
Re: Kernel usage time
- From: Anurag Verma <newanurag@xxxxxxxxx>
Re: Kernel usage time
- From: Sunil Joshi <mail2joshi@xxxxxxxxx>
RE: Kernel usage time
- From: "Nori, Soma Sekhar" <nsekhar@xxxxxx>
Kernel usage time
- From: Anurag Verma <newanurag@xxxxxxxxx>
How Kernel module
- From: "jhoney jhoney" <jhoney_joney@xxxxxxxxxxxxxx>
Re: On kernel.org, what is 2.6.12-rc4-git7
- From: Greg KH <greg@xxxxxxxxx>
On kernel.org, what is 2.6.12-rc4-git7
- From: Greg Freemyer <greg.freemyer@xxxxxxxxx>
Re: get the reserved memory
- From: nicolas Wilczak <wilczak@xxxxxxxxx>
Re: get the reserved memory
- From: nicolas Wilczak <wilczak@xxxxxxxxx>
Re: Error while compiling UML Kernel
- From: Dinesh Ahuja <mdlinux7@xxxxxxxxxxx>
Re: get the reserved memory
- From: Fawad Lateef <fawadlateef@xxxxxxxxx>
get the reserved memory
- From: nicolas Wilczak <wilczak@xxxxxxxxx>
Re: set_fs() get_fs and general protection fault
- From: Christophe Lucas <clucas@xxxxxxxxxxxxx>
Re: Error while compiling UML Kernel
- From: Christophe Lucas <clucas@xxxxxxxxxxxxx>
Re: moudle taints the kernel
- From: Ashutosh Naik <ashutosh_naik@xxxxxxxxxxx>
Re: Extend ext3 on-disk structure (inode&superblock), s_uuid
- From: Harsha Srinath <harsha@xxxxxxx>
Re: Extend ext3 on-disk structure (inode&superblock), s_uuid
- From: Harsha Srinath <harsha@xxxxxxx>
set_fs() get_fs and general protection fault
- From: Vincenzo Mallozzi <vinjunior@xxxxxxxx>
Error while compiling UML Kernel
- From: Dinesh Ahuja <mdlinux7@xxxxxxxxxxx>
Re: Understanding code flow in kernel from kernel module
- From: Jan Hudec <bulb@xxxxxx>
Re: Understanding code flow in kernel from kernel module
- From: Dinesh Ahuja <mdlinux7@xxxxxxxxxxx>
VFS lookup
- From: Perfect Stranger <gilmour@xxxxxxxxxxx>
getting and killing super blocks
- From: Perfect Stranger <gilmour@xxxxxxxxxxx>
Re: moudle taints the kernel
- From: Thomas Petazzoni <thomas.petazzoni@xxxxxxxx>
Re: moudle taints the kernel
- From: Thomas Petazzoni <thomas.petazzoni@xxxxxxxx>
moudle taints the kernel
- From: pavan <pavan@xxxxxxxxxxxxxx>
Re: Understanding code flow in kernel from kernel module
- From: Jan Hudec <bulb@xxxxxx>
ext3 & XATTR
- From: Can Sar <csar@xxxxxxxxxxxx>
Kernel oops: 2.4.30. Unable to handle kernel paging request at virtual address
- From: Санжар Жалил <kozeol@xxxxxxxxx>
Re: Extend ext3 on-disk structure (inode&superblock), s_uuid
- From: Aurelien Degremont - Stagiaire <degremont@xxxxxxxxxxx>
Re: signal handling in kernel threads
- From: Tyler <tyler@xxxxxxxx>
Re: signal handling in kernel threads
- From: Tyler <tyler@xxxxxxxx>
Re: Understanding code flow in kernel from kernel module
- From: Dinesh Ahuja <mdlinux7@xxxxxxxxxxx>
Re: [Fwd: Re: How to use a shell command in an application?]
- From: K S Sandeep <kssandeep@xxxxxxxxx>
signal handling in kernel threads
- From: Rock Gordon <rockgordon@xxxxxxxxx>
Re: actual open in SYS_open?
- From: Jan Hudec <bulb@xxxxxx>
Re: Understanding code flow in kernel from kernel module
- From: Jan Hudec <bulb@xxxxxx>
Re: Re: Is socket communication socket possible between kernel modules and user space?
- From: "vaishali paisal" <vaishalipaisal@xxxxxxxxxxxxxx>
Kernel unaligned Access
- From: "R.Kaushik Kumar" <kaukum@xxxxxxxxxxx>
actual open in SYS_open?
- From: Perfect Stranger <gilmour@xxxxxxxxxxx>
Re: [Fwd: Re: How to use a shell command in an application?]
- From: "Sandeep K.S" <sandeep@xxxxxxxxxxxxxxx>
Understanding code flow in kernel from kernel module
- From: Dinesh Ahuja <mdlinux7@xxxxxxxxxxx>
Re: need info from /proc
- From: Erik Mouw <J.A.K.Mouw@xxxxxxxxxxxxxx>
Re: Re: Is socket communication socket possible between kernel modules and user space?
- From: "vaishali paisal" <vaishalipaisal@xxxxxxxxxxxxxx>
Re: Is socket communication socket possible between kernel modules and user space?
- From: Anurag Verma <newanurag@xxxxxxxxx>
Re: Is socket communication socket possible between kernel modules and user space?
- From: "vaishali paisal" <vaishalipaisal@xxxxxxxxxxxxxx>
Re: networking bugs?
- From: Jan Hudec <bulb@xxxxxx>
Kernel timer context + proper usage
- From: Chandrakanth Chereddi <chereddi@xxxxxxxxx>
need info from /proc
- From: Yasmine Habib <yasmine.maged@xxxxxxxxx>
Re: Advice re LKML submittal [Was: scx200 & gpio [trivial patch]]
- From: Greg KH <greg@xxxxxxxxx>
networking bugs?
- From: "Priya ." <snailkarma@xxxxxxxxx>
Re: Where does "top" get CPU Utilization
- From: Jim Bauer <jfbauer@xxxxxxx>
Where does "top" get CPU Utilization
- From: Yasmine Habib <yasmine.maged@xxxxxxxxx>
Advice re LKML submittal [Was: scx200 & gpio [trivial patch]]
- From: Jim Cromie <jcromie@xxxxxxxxxx>
Extend ext3 on-disk structure (inode&superblock), s_uuid
- From: Aurelien Degremont - Stagiaire <degremont@xxxxxxxxxxx>
network device help
- From: cranium2003 <cranium2003@xxxxxxxxx>
Kernel Timers Code
- From: "vaishali paisal" <vaishalipaisal@xxxxxxxxxxxxxx>
Re: Linux and Segments
- From: Learner <ruxyz@xxxxxxxxx>
Re: module-name-change breaks kobject ?
- From: Greg KH <greg@xxxxxxxxx>
Re: module-name-change breaks kobject ?
- From: Jim Cromie <jcromie@xxxxxxxxxx>
Re: Share Wait Queue between different modules ?
- From: JinHyung Park <jinhyung@xxxxxxxxx>
Re: Share Wait Queue between different modules ?
- From: JinHyung Park <jinhyung@xxxxxxxxx>
Re: module-name-change breaks kobject ?
- From: Greg KH <greg@xxxxxxxxx>
module-name-change breaks kobject ?
- From: Jim Cromie <jcromie@xxxxxxxxxx>
Re: where does driver framework call device_driver->probe?
- From: Greg KH <greg@xxxxxxxxx>
where does driver framework call device_driver->probe?
- From: Bahadir Balban <bahadir.balban@xxxxxxxxx>
Re: Linux Segments
- From: Manish Regmi <regmi.manish@xxxxxxxxx>
Linux and Segments
- From: Andre Luiz da Silva <andrack@xxxxxxxxx>
Re: Share Wait Queue between different modules ?
- From: Manish Regmi <regmi.manish@xxxxxxxxx>
Linux Segments
- From: Andre Luiz da Silva <andrack@xxxxxxxxx>
Re:Re: Is socket communication socket possible between kernel modules and user space?
- From: "vaishali paisal" <vaishalipaisal@xxxxxxxxxxxxxx>
Re: Share Wait Queue between different modules ?
- From: anew bie <anewbie79@xxxxxxxxx>
Re: dev_add_pack
- From: Arjan van de Ven <arjan@xxxxxxxxxxxxx>
dev_add_pack
- From: kulkarni abhi <abhi_kernel@xxxxxxxxx>
Problem with dynamite checkpoint
- From: Yasmine Habib <yasmine.maged@xxxxxxxxx>
Re: Is socket communication socket possible between kernel modules and user space?
- From: arvind k <arvind_000@xxxxxxxxx>
Share Wait Queue between different modules ?
- From: Dinesh Ahuja <mdlinux7@xxxxxxxxxxx>
Problem in Blocking I/O
- From: Dinesh Ahuja <mdlinux7@xxxxxxxxxxx>
Re: Y2K-like bug to hit Linux computers!
- From: Simon Valiquette <v.simon@xxxxxxxx>
Re: ...needs some links on ethernet driver(Realtek -8139)
- From: Manish Regmi <regmi.manish@xxxxxxxxx>
...needs some links on ethernet driver(Realtek -8139)
- From: sushil mayengbam <kernel_hooker@xxxxxxxxx>
Need help with getting correct CPU Utilization from "top"
- From: Yasmine Habib <yasmine.maged@xxxxxxxxx>
Re: Y2K-like bug to hit Linux computers! - Info of the day
- From: Rik van Riel <riel@xxxxxxxxxxx>
insmod and current process
- From: Vincenzo Mallozzi <vinjunior@xxxxxxxx>
Re: How to write to a raw device inside a kernel module
- From: Greg KH <greg@xxxxxxxxx>
Re: Y2K-like bug to hit Linux computers! - Info of the day
- From: Lauro Moura <lauromoura@xxxxxxxxx>
Y2K-like bug to hit Linux computers! - Info of the day
- From: "Srinivas G." <srinivasg@xxxxxxxxxxxxxxxxxxxxx>
Re: beginner question on do_page_fault function and COW
- From: Rik van Riel <riel@xxxxxxxxxxx>
Re: How to write to a raw device inside a kernel module
- From: Sandeep Tyagi <sandeepktyagi@xxxxxxxxx>
Is socket communication socket possible between kernel modules and user space?
- From: "vaishali paisal" <vaishalipaisal@xxxxxxxxxxxxxx>
Re: How to write to a raw device inside a kernel module
- From: Greg KH <greg@xxxxxxxxx>
Re: Re: Ext3 Quick Shutdown
- From: "nitin ahuja" <nitin2ahuja@xxxxxxxxxxxxx>
Re: How to write to a raw device inside a kernel module
- From: Sandeep Tyagi <sandeepktyagi@xxxxxxxxx>
Re: How to write to a raw device inside a kernel module
- From: Greg KH <greg@xxxxxxxxx>
How to write to a raw device inside a kernel module
- From: Sandeep Tyagi <sandeepktyagi@xxxxxxxxx>
How to write to a raw device inside a kernel module
- From: Sandeep Tyagi <sandeepktyagi@xxxxxxxxx>
Re: Ext3 Quick Shutdown
- From: Ashwin Ramaswamy <a.galadriel@xxxxxxxxx>
Re: Re: Ext3 Quick Shutdown
- From: "nitin ahuja" <nitin2ahuja@xxxxxxxxxxxxx>
Re: Ext3 Quick Shutdown
- From: Julien Danjou <julien@xxxxxxxxxxx>
Ext3 Quick Shutdown
- From: Ashwin Ramaswamy <a.galadriel@xxxxxxxxx>
Re: I need a good packet injector
- From: Swapnil Nagle <swapsn@xxxxxxxxxxxxxx>
Re: compiling 2.6 kernel module
- From: Mandeep Sandhu <Mandeep_Sandhu@xxxxxxxxxxx>
Re: compiling 2.6 kernel module
- From: Hitesh M <hiteshm@xxxxxxxxxxxxxx>
Re: about CLONE_NEWNS
- From: Loic Domaigne <loic-dev@xxxxxxx>
Difference between pid in PVM and pid in kernel
- From: Yasmine Habib <yasmine.maged@xxxxxxxxx>
Re: compiling 2.6 kernel module
- From: suren <suren@xxxxxxxxxxxxx>
Re: How do I compile a kernel ? faq
- From: Erik Mouw <J.A.K.Mouw@xxxxxxxxxxxxxx>
How do I compile a kernel ? faq
- From: "Ionut Ambrosie" <ionut@xxxxxxxxxxxxx>
Re: I need a good packet injector
- From: Mandeep Sandhu <Mandeep_Sandhu@xxxxxxxxxxx>
I need a good packet injector
- From: "Steve Iribarne" <steve.iribarne@xxxxxxxxxxxxxxxxxxxxx>
Re: RAID and LVM without config files.
- From: Tetsuo Handa <from-kernelnewbies@xxxxxxxxxxxxxxxxxxx>
Re: network driver in 2.4.30
- From: Christophe Lucas <clucas@xxxxxxxxxxxxx>
Re: network driver in 2.4.30
- From: Thomas Petazzoni <thomas.petazzoni@xxxxxxxx>
Re: RAID and LVM without config files.
- From: Vin <pane.vinayak@xxxxxxxxx>
network driver in 2.4.30
- From: pavan <pavan@xxxxxxxxxxxxxx>
Re: dynamic kernel timer query
- From: William J Beksi <wjbeksi@xxxxxxxxxxx>
journey of a packet in 2.6...
- From: Manish Regmi <regmi.manish@xxxxxxxxx>
Re: icmp_send()
- From: kalkov <kalkotiv@xxxxxxxxx>
dynamic kernel timer query
- From: Indraneel Mukherjee <mukherjee.indraneel@xxxxxxxxx>
Re: RAID and LVM without config files.
- From: Andre Luiz da Silva <andrack@xxxxxxxxx>
Re: RAID and LVM without config files.
- From: Erik Mouw <J.A.K.Mouw@xxxxxxxxxxxxxx>
RAID and LVM without config files.
- From: Tetsuo Handa <from-kernelnewbies@xxxxxxxxxxxxxxxxxxx>
Re: beginner question on do_page_fault function and COW
- From: Ashwin Rao <ashwin.shirvanthe@xxxxxxxxx>
Re: Fwd: kernel 2.6.x driver compiler options
- From: Mandeep Sandhu <Mandeep_Sandhu@xxxxxxxxxxx>
Fwd: kernel 2.6.x driver compiler options
- From: rajat swarup <rajats@xxxxxxxxx>
Re: icmp_send()
- From: rajat swarup <rajats@xxxxxxxxx>
Re: [Fwd: Re: How to use a shell command in an application?]
- From: Jan Hudec <bulb@xxxxxx>
Re: An attempt to improve the swap tokening:
- From: Coywolf Qi Hunt <coywolf@xxxxxxxxx>
Re: How to use a shell command in an application?
- From: Jan Hudec <bulb@xxxxxx>
Re: Re: How loopbacking works in linux..?
- From: Karthik Subramanian <karthik301176@xxxxxxxxx>
Re: [Fwd: Re: How to use a shell command in an application?]
- From: Sandeep Tyagi <sandeepktyagi@xxxxxxxxx>
[Fwd: Re: How to use a shell command in an application?]
- From: Sandeep <sandeep@xxxxxxxxxxxxxxx>
RE: Automated make question
- From: Mandeep Sandhu <Mandeep_Sandhu@xxxxxxxxxxx>
Re: How to use a shell command in an application?
- From: Sandeep <sandeep@xxxxxxxxxxxxxxx>
Re: Re: How loopbacking works in linux..?
- From: "rajesh ms" <torajeshms@xxxxxxxxxxxxxx>
How to use a shell command in an application?
- From: Yasmine Habib <yasmine.maged@xxxxxxxxx>
beginner question on do_page_fault function and COW
- From: Vincenzo Mallozzi <vinjunior@xxxxxxxx>
Re: Automated make question
- From: Jim Bauer <jfbauer@xxxxxxx>
RE: Automated make question
- From: "Steve Iribarne" <steve.iribarne@xxxxxxxxxxxxxxxxxxxxx>
Re: How loopbacking works in linux..?
- From: vijay kalkoti <vijayck@xxxxxxxxx>
I need current cpu utilization
- From: Yasmine Habib <yasmine.maged@xxxxxxxxx>
Re: I need current cpu utilization
- From: Zeeshan Ali <zeenix@xxxxxxxxx>
Re: 2.4 kernel programming
- From: Mandeep Sandhu <Mandeep_Sandhu@xxxxxxxxxxx>
Re: 2.4 kernel programming
- From: Christophe Lucas <clucas@xxxxxxxxxxxxx>
Re: 2.4 kernel programming
- From: Thomas Petazzoni <thomas.petazzoni@xxxxxxxx>
2.4 kernel programming
- From: pavan <pavan@xxxxxxxxxxxxxx>
Re: VFS readdir
- From: "lk" <linux_kernel@xxxxxxxxx>
Re: Re: Kernel timers problem
- From: "vaishali paisal" <vaishalipaisal@xxxxxxxxxxxxxx>
VFS readdir
- From: "Jason J. Herne" <hernejj@xxxxxxxxxxxx>
An attempt to improve the swap tokening:
- From: "A.M. Fradley" <u2amf@xxxxxxxxxxxxx>
Ethernet checksum
- From: rajat swarup <rajats@xxxxxxxxx>
[Fwd: Re: Question about scheduler 2.4]
- From: Paolo Minazzi <paolo.minazzi@xxxxxxxx>
How loopbacking works in linux..?
- From: "rajesh ms" <torajeshms@xxxxxxxxxxxxxx>
Re: icmp_send()
- From: kalkov <kalkotiv@xxxxxxxxx>
Re: USB driver in 2.6 kernel???
- From: Greg KH <greg@xxxxxxxxx>
USB driver in 2.6 kernel???
- From: Xiangfei Jia <xjianz@xxxxxxxxx>
Re: Locking issue...
- From: Rik van Riel <riel@xxxxxxxxxx>
Locking issue...
- From: Rahul Iyer <rni@xxxxxxxxxxxxxx>
Re: Machine Language Translator thoughts[was i know this will sound stupied but ...]
- From: Rik van Riel <riel@xxxxxxxxxxx>
Re: Understanding the USB OHCI Glue layer (OMAP)
- From: Bahadir Balban <bahadir.balban@xxxxxxxxx>
Re: icmp_send()
- From: rajat swarup <rajats@xxxxxxxxx>
Re: icmp_send()
- From: kalkov <kalkotiv@xxxxxxxxx>
Re: icmp_send()
- From: rajat swarup <rajats@xxxxxxxxx>
Re: icmp_send()
- From: kalkov <kalkotiv@xxxxxxxxx>
Re: Automated make question
- From: Mandeep Sandhu <Mandeep_Sandhu@xxxxxxxxxxx>
Re: Automated make question
- From: Tyler <tyler@xxxxxxxx>
icmp_send()
- From: rajat swarup <rajats@xxxxxxxxx>
UDP connection in PVM
- From: Yasmine Habib <yasmine.maged@xxxxxxxxx>
linux.bkbits.net question: mapping cset to kernel version?
- From: Timur Tabi <timur.tabi@xxxxxxxxxxx>
Automated make question
- From: "Steve Iribarne" <steve.iribarne@xxxxxxxxxxxxxxxxxxxxx>
Config.in to Kconfig
- From: Harsha Srinath <harsha@xxxxxxx>
Re: 2.4.21 kernel compilation problem
- From: Hitesh M <hiteshm@xxxxxxxxxxxxxx>
2.4.21 kernel compilation problem
- From: pavan <pavan@xxxxxxxxxxxxxx>
Re: Kernel timers problem
- From: Thomas Petazzoni <thomas.petazzoni@xxxxxxxx>
Re: Re: gdb for kernel debugging
- From: "Sandeep" <sandeep@xxxxxxxxxxxxxxx>
Re: Re: gdb for kernel debugging
- From: Vishal Linux <vishal.linux@xxxxxxxxx>
Re: Re: Kernel timers problem
- From: "vaishali paisal" <vaishalipaisal@xxxxxxxxxxxxxx>
Re: Re: Kernel timers problem
- From: "vaishali paisal" <vaishalipaisal@xxxxxxxxxxxxxx>
Re: Kernel timers problem
- From: Thomas Petazzoni <thomas.petazzoni@xxxxxxxx>

[Index of Archives] [Newbies FAQ] [Linux Kernel Mentors] [Linux Kernel Development] [IETF Annouce] [Git] [Networking] [Security] [Bugtraq] [Yosemite] [MIPS Linux] [ARM Linux] [Linux RAID] [Linux SCSI] [Linux ACPI]