Linux RAID Storage Date Index

• Thread Index

• Re: RAID 5 disk format for Promise SuperTrak Sx6000 (Linux)
  • From: "3tcdgwg3" <3tcdgwg3@xxxxxxxxxxx>
• AW: RAID 5 disk format for Promise SuperTrak Sx6000 (Linux)
  • From: "Martin Bene" <martin.bene@xxxxxxxxxxxxx>
• RAID 5 disk format for Promise SuperTrak Sx6000 (Linux)
  • From: bfowler@xxxxxxxxxxxxxx (ewitness - Ben Fowler)
• Re: Need help for the installation of RAID1 on Rtlinux
  • From: Luca Berra <bluca@xxxxxxxxxx>
• Re: some question in SoftRaid
  • From: Danilo Godec <danci@xxxxxxxxx>
• Re: some question in SoftRaid
  • From: <lilha@xxxxxxxxxxxxx>
• Re: bad block remapping
  • From: Justin Kanoa Withington <kanoa@xxxxxxxxxxxxxxx>
• Re: about delete raid
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Re: bad block remapping
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• bad block remapping
  • From: Justin Kanoa Withington <kanoa@xxxxxxxxxxxxxxx>
• about delete raid
  • From: lilha@xxxxxxxxxxxxx
• Re: some question in SoftRaid
  • From: Danilo Godec <danci@xxxxxxxxx>
• RE: /proc/mdstat output
  • From: "Potthoff, Kay" <Kay.Potthoff@xxxxxxxx>
• /proc/mdstat output
  • From: "Rene Scherer" <rene@xxxxxxxxxxxxxxxxxx>
• some question in SoftRaid
  • From: lilha@xxxxxxxxxxxxx
• RE: Q: Priority of md_thread()
  • From: "Potthoff, Kay" <Kay.Potthoff@xxxxxxxx>
• Re: Q: Priority of md_thread()
  • From: Jakob Østergaard <jakob@xxxxxxxxxxxxx>
• RH73 using raid1
  • From: Christian Schmit <cschmit@xxxxx>
• Re: Software RAID Stopped Working With Aurora Kernel
  • From: "Calvin D. Webster" <cwebster@xxxxxxxxx>
• Q: Priority of md_thread()
  • From: "Potthoff, Kay" <Kay.Potthoff@xxxxxxxx>
• Re: Software RAID Stopped Working With Aurora Kernel
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Re: Software RAID Stopped Working With Aurora Kernel
  • From: "Calvin D. Webster" <cwebster@xxxxxxxxx>
• RE: Software RAID Stopped Working With Aurora Kernel
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• RE: building network software raid
  • From: Johannes Puschmann <puschl@xxxxxxxxx>
• Re: building network software raid
  • From: Mike Tran <mhtran@xxxxxxxxxx>
• building network software raid
  • From: lylai <lylai@xxxxxxxxxxxxxxxx>
• RE: Software RAID Stopped Working With Aurora Kernel
  • From: "Cal Webster" <kc130iseo@xxxxxxxxxxxxxx>
• Re: Software RAID Stopped Working With Aurora Kernel
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Re: Software RAID Stopped Working With Aurora Kernel
  • From: "Calvin D. Webster" <cwebster@xxxxxxxxx>
• Re: Software RAID Stopped Working With Aurora Kernel
  • From: "Calvin D. Webster" <cwebster@xxxxxxxxx>
• RE: Software RAID Stopped Working With Aurora Kernel
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• RE: Software RAID Stopped Working With Aurora Kernel
  • From: "Cal Webster" <kc130iseo@xxxxxxxxxxxxxx>
• Re: changing major/minor numbers
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Re: Software RAID Stopped Working With Aurora Kernel
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Re: How SW-RAID detects new disks
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• linux mkraid: segmentation fault
  • From: Anthony Johnson <anthony@xxxxxxxxxx>
• linux mkraid: segmentation fault
  • From: Anthony Johnson <anthony@xxxxxxxxxx>
• Kernel Problem
  • From: Brinley Craig <brinley.craig@xxxxxxxxxxxxxxxx>
• Software RAID Stopped Working With Aurora Kernel
  • From: "Calvin Webster" <cwebster@xxxxxxxxx>
• How SW-RAID detects new disks
  • From: Rabeeh Khoury <rabeeh@xxxxxxxxxxxxx>
• Re: mdadm --monitor
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Re: mdadm --monitor
  • From: Danilo Godec <danci@xxxxxxxxx>
• Re: Removing a Raid Partition? How-to?
  • From: Jeff Hill <jhill@xxxxxxxxxx>
• changing major/minor numbers
  • From: Kirill Malkin <malkin@xxxxxxxxxxx>
• Re: mdadm --monitor
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• mdadm --monitor
  • From: Danilo Godec <danci@xxxxxxxxx>
• Re: Removing a Raid Partition? How-to?
  • From: Jeff Hill <jhill@xxxxxxxxxxxx>
• Re: Removing a Raid Partition? How-to?
  • From: "Gernot A. Weber" <gernot@xxxxxxxxxx>
• PATCH - md in 2.4.19-pre - Correctly abort recovery if raid personality indicates an error
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• PATCH - raid in 2.5.15 - 3 of 3 - Initial md/raid5 support for 2.5 (with bio)
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• PATCH - raid in 2.5.15 - 2 of 3 - Tidy up raid5 code
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• PATCH - raid in 2.5.15 - 1 of 3 - Change MD Superblock IO to go straight to submit_bio
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• raidtools -> mdadm migration
  • From: raid+news@xxxxxxxxxx
• is there any way to delay reconstruction?
  • From: dean gaudet <dean-list-linux-raid@xxxxxxxxxx>
• Re: Removing a Raid Partition? How-to?
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Removing a Raid Partition? How-to?
  • From: Jeff Hill <jhill@xxxxxxxxxxxx>
• Unrecognized raid partitions durring upgrade
  • From: Maxwell Bottiger <mbotti1@xxxxxxxxxxx>
• Re: Re: RAID1 failure recovery
  • From: Maxim Frolov <wrungel@xxxxxx>
• Re: Fw: DriveReady SeekComplete problems
  • From: Danilo Godec <danci@xxxxxxxxx>
• Re: Fw: DriveReady SeekComplete problems
  • From: Mikael Abrahamsson <swmike@xxxxxxxxx>
• Re: Fw: DriveReady SeekComplete problems
  • From: "Artur Jasowicz" <arturj@xxxxxxxxxxxxxxxxx>
• Re: Fw: DriveReady SeekComplete problems
  • From: Mikael Abrahamsson <swmike@xxxxxxxxx>
• Re: Fw: DriveReady SeekComplete problems
  • From: Alvin Oga <aoga@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: Fw: DriveReady SeekComplete problems
  • From: Danilo Godec <danci@xxxxxxxxx>
• Re: RAID1 failure recovery
  • From: Alvin Oga <aoga@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: RAID1 failure recovery
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Re: Fw: DriveReady SeekComplete problems
  • From: "Artur Jasowicz" <arturj@xxxxxxxxxxxxxxxxx>
• RAID1 failure recovery
  • From: Maxim Frolov <wrungel@xxxxxx>
• Re: Fw: DriveReady SeekComplete problems
  • From: "Diamon" <diamon@xxxxxx>
• Re: Fw: DriveReady SeekComplete problems
  • From: "Artur Jasowicz" <arturj@xxxxxxxxxxxxxxxxx>
• ANNOUNCE: mdadm 1.0.0 - A tool for managing Soft RAID under Linux
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Re: Fw: DriveReady SeekComplete problems
  • From: "Artur Jasowicz" <arturj@xxxxxxxxxxxxxxxxx>
• Re: Fw: DriveReady SeekComplete problems
  • From: Karsten Becker <KB@xxxxxxxxxxxxxxxxx>
• Fw: DriveReady SeekComplete problems
  • From: "Artur Jasowicz" <arturj@xxxxxxxxxxxxxxxxx>
• Re: >12 drives in a RAID?
  • From: Jakob Østergaard <jakob@xxxxxxxxxxxxx>
• >12 drives in a RAID?
  • From: Roy Sigurd Karlsbakk <roy@xxxxxxxxxxxxxx>
• Re: Adding spare drive
  • From: Derek Vadala <derek@xxxxxxxxxxxx>
• Adding spare drive
  • From: "mousebusiness.com" <arturj@xxxxxxxxxxxxxxxxx>
• Re: Creating failed-mode RAID1 with mdadm
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Re: Raidstop /dev/md0 won't work
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Re: Raidstop /dev/md0 won't work
  • From: Derek Vadala <derek@xxxxxxxxxxxx>
• Raidstop /dev/md0 won't work
  • From: Scott Walter <walter@xxxxxxxxxxxxxxxx>
• Re: switching from harware to kernel raid5
  • From: Jakob Østergaard <jakob@xxxxxxxxxxxxx>
• RE: RAID detection and activation w/o auto detection
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Re: raid5: switching cache buffer size log spam
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• RE: RAID detection and activation w/o auto detection
  • From: "Yuval Yeret" <yuval@xxxxxxxxxx>
• Re: RAID detection and activation w/o auto detection
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Re: RAID detection and activation w/o auto detection
  • From: "Mr. James W. Laferriere" <babydr@xxxxxxxxxxxxxxxx>
• Re: RAID detection and activation w/o auto detection
  • From: "Mr. James W. Laferriere" <babydr@xxxxxxxxxxxxxxxx>
• Re: Creating failed-mode RAID1 with mdadm
  • From: "bo" <bo@xxxxxxxxxxxxxx>
• Re: raid 5 question
  • From: Jakob Østergaard <jakob@xxxxxxxxxxxxx>
• Re: Creating failed-mode RAID1 with mdadm
  • From: Ross Vandegrift <ross@xxxxxxxxxxxxxxxx>
• Creating failed-mode RAID1 with mdadm
  • From: Ross Vandegrift <ross@xxxxxxxxxxxxxxxx>
• Re: RAID detection and activation w/o auto detection
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• RAID detection and activation w/o auto detection
  • From: "bo" <bo@xxxxxxxxxxxxxx>
• Re: raid 5 question
  • From: Derek Vadala <derek@xxxxxxxxxxxx>
• Re: raid 5 question
  • From: Maurice Hilarius <maurice@xxxxxxxxxxxx>
• Re: raid 5 question
  • From: "bo" <bo@xxxxxxxxxxxxxx>
• switching from harware to kernel raid5
  • From: Louis-David Mitterrand <vindex@xxxxxxxxxxx>
• Re: raid 5 question
  • From: Jakob Østergaard <jakob@xxxxxxxxxxxxx>
• Re: raid5: switching cache buffer size log spam
  • From: dean gaudet <dean@xxxxxxxxxx>
• Re: RAID autorun support for SunOS disk labels
  • From: Andrew Beresford <beezly@xxxxxxxxxxxxx>
• Re: RAID autorun support for SunOS disk labels
  • From: Gregory Leblanc <gleblanc@xxxxxxxxxxxxxxx>
• Re: raid1 oops in raid1_read_balance on Sparc64
  • From: Andrew Beresford <beezly@xxxxxxxxxxxxx>
• RAID autorun support for SunOS disk labels
  • From: Andrew Beresford <beezly@xxxxxxxxxxxxx>
• raid 5 question
  • From: Marcus Schommer <schommer@xxxxxxx>
• LILO related problem
  • From: eim <eim@xxxxxxxxxx>
• multipath personality kernel oops when starting a virtual path with one of the physical paths unavailable
  • From: "nurit" <nurit@xxxxxxxxxx>
• Re: raid1 oops in raid1_read_balance on Sparc64
  • From: Andrew Beresford <beezly@xxxxxxxxxxxxx>
• Re: raid1 oops in raid1_read_balance on Sparc64
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• raid1 oops in raid1_read_balance on Sparc64
  • From: Andrew Beresford <beezly@xxxxxxxxxxxxx>
• Re: Replacing a RAID 1 array
  • From: Michael Robinton <michael@xxxxxxxxxxxxxx>
• Re: Replacing a RAID 1 array
  • From: Ross Vandegrift <ross@xxxxxxxxxxxxxxxx>
• Replacing a RAID 1 array
  • From: Dovli X <the_dovlets@xxxxxxxxx>
• Re: URGENT lilo problems
  • From: Iain <iain@xxxxxxxxxxx>
• Re: URGENT lilo problems
  • From: Jakob Østergaard <jakob@xxxxxxxxxxxxx>
• URGENT lilo problems
  • From: Iain <iain@xxxxxxxxxxx>
• Re: 2 HBA's and Multipath.
  • From: SoulBlazer <soul@xxxxxxxxxxxxx>
• resizing RAID0 in-place
  • From: Markus Schoder <markus_schoder@xxxxxxxx>
• Re: RAID1 degradation failure.. (2.4.17)
  • From: Matti Aarnio <matti.aarnio@xxxxxxxxxxx>
• RAID1 degradation failure.. (2.4.17)
  • From: Matti Aarnio <matti.aarnio@xxxxxxxxxxx>
• Re: couple of seemingly dumb questions
  • From: Danilo Godec <danci@xxxxxxxxx>
• Re: couple of seemingly dumb questions
  • From: Danilo Godec <danci@xxxxxxxxx>
• Re: mdadm help and howto for newbies?
  • From: Stephen Lee <splee@xxxxxxxxxx>
• Re: 2 HBA's and Multipath.
  • From: Luca Berra <bluca@xxxxxxxxxx>
• mdctl/mdadm alternate download site?
  • From: Jason White <jdwhite@xxxxxxxxxxx>
• Re: mdadm help and howto for newbies?
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• mdadm help and howto for newbies?
  • From: Stephen Lee <splee@xxxxxxxxxx>
• Re: 2 HBA's and Multipath.
  • From: SoulBlazer <soul@xxxxxxxxxxxxx>
• Re: 2 HBA's and Multipath.
  • From: SoulBlazer <soul@xxxxxxxxxxxxx>
• Re: couple of seemingly dumb questions
  • From: Maurice Hilarius <maurice@xxxxxxxxxxxx>
• Re: couple of seemingly dumb questions
  • From: "bo" <bo@xxxxxxxxxxxxxx>
• Re: couple of seemingly dumb questions
  • From: Danilo Godec <danci@xxxxxxxxx>
• couple of seemingly dumb questions
  • From: Maurice Hilarius <maurice@xxxxxxxxxxxx>
• Obsolete MD ioctl on dmesg
  • From: "bo" <bo@xxxxxxxxxxxxxx>
• Problems moving a raid5 to other devices
  • From: Vidar <vl-list@xxxxx>
• Re: How to change the preferred minor
  • From: Anders Nielsen <anielsen@xxxxxxx>
• Re: Mirroring
  • From: "Gernot A. Weber" <gernot@xxxxxxxxxx>
• Mirroring
  • From: Mohamed Farouk <mohamed.farouk@xxxxxxxxxxx>
• NOT an announce for raidtools-1.0
  • From: Luca Berra <bluca@xxxxxxxxxx>
• Re: 2 HBA's and Multipath.
  • From: Luca Berra <bluca@xxxxxxxxxx>
• Re: How to change the preferred minor
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Re: ANNOUNCE - mdadm 0.8 - candidate for 1.0
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Re: adding disk to raid5 array
  • From: "Anders K. Pedersen" <akp@xxxxxxxxxxxx>
• How to change the preferred minor
  • From: Anders Nielsen <anielsen@xxxxxxx>
• e2fsck, badblocks - a bit OT
  • From: Danilo Godec <danci@xxxxxxxxx>
• Re: ANNOUNCE - mdadm 0.8 - candidate for 1.0
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• adding disk to raid5 array
  • From: David Hajek <hajek@xxxxxxxxxxxx>
• Re: Floating Spare
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Re: broken disk?
  • From: Mathieu Chouquet-Stringer <mathieu@xxxxxxxxxxx>
• Re: broken disk?
  • From: "Gernot A. Weber" <gernot@xxxxxxxxxx>
• Re: broken disk?
  • From: Mathieu Chouquet-Stringer <mathieu@xxxxxxxxxxx>
• broken disk?
  • From: "Gernot A. Weber" <gernot@xxxxxxxxxx>
• Re: 2 HBA's and Multipath.
  • From: SoulBlazer <soul@xxxxxxxxxxxxx>
• Re: 2 HBA's and Multipath.
  • From: Luca Berra <bluca@xxxxxxxxxx>
• Re: Floating Spare
  • From: Marcel <marcelb@xxxxxxxxxx>
• 2 HBA's and Multipath.
  • From: SoulBlazer <soul@xxxxxxxxxxxxx>
• Floating Spare
  • From: SoulBlazer <soul@xxxxxxxxxxxxx>
• Re: Winfast ATA100
  • From: Brad Hubbard <brad@xxxxxxxxxxxxxxxx>
• Re: mdadm Some Makefile changes , Hth , JimL
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Re: mdadm Some Makefile changes , Hth , JimL
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Software RAID-1 and badblocks
  • From: Kevin Page <krp@xxxxxxxxxxxxxxx>
• Re: mdadm Some Makefile changes , Hth , JimL
  • From: Jakob Østergaard <jakob@xxxxxxxxxxxxx>
• LVM / EXT3 production ready ?
  • From: Steven Rodenburg <steven.rodenburg@xxxxxxxxx>
• Re: ANNOUNCE - mdadm 0.8 - candidate for 1.0
  • From: Luca Berra <bluca@xxxxxxxxxx>
• Performance problems with kupdated and kswapd
  • From: Alberto Alonso <alberto@xxxxxxxxxxx>
• Re: Unable to mount root fs on 09:03
  • From: Gregory Leblanc <gleblanc@xxxxxxxxxxxxxxx>
• Re: raid5: switching cache buffer size log spam
  • From: dean gaudet <dean-list-linux-kernel@xxxxxxxxxx>
• Re: mdadm Some Makefile changes , Hth , JimL
  • From: "Mr. James W. Laferriere" <babydr@xxxxxxxxxxxxxxxx>
• Unable to mount root fs on 09:03
  • From: Brad Hubbard <brad@xxxxxxxxxxxxxxxx>
• Re: mdadm Some Makefile changes , Hth , JimL
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Re: mdadm Some Makefile changes , Hth , JimL
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• mdadm Some Makefile changes , Hth , JimL
  • From: "Mr. James W. Laferriere" <babydr@xxxxxxxxxxxxxxxx>
• Oops with Sparc/RAID1/ext3
  • From: Andrew Beresford <beezly@xxxxxxxxxxxxx>
• Re: Linux RAID bug?
  • From: "Rob MacGregor" <rob_macgregor@xxxxxxxxxxx>
• Re: Stuck in a weird RAID state
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Re: Stuck in a weird RAID state
  • From: Stephen Lee <splee@xxxxxxxxxx>
• Stuck in a weird RAID state
  • From: jim@xxxxxxxxxxxx
• Re: ANNOUNCE - mdadm 0.8 - candidate for 1.0
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Re: ANNOUNCE - mdadm 0.8 - candidate for 1.0
  • From: Luca Berra <bluca@xxxxxxxxxx>
• Re: mdadm 0.8 suggestions
  • From: brian@xxxxxxxxxxxxxxxx
• Re: ANNOUNCE - mdadm 0.8 - candidate for 1.0
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Re: mdadm 0.8 suggestions
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Re: ANNOUNCE - mdadm 0.8 - candidate for 1.0
  • From: Derek Vadala <derek@xxxxxxxxxxxx>
• Re: mdadm 0.8 suggestions
  • From: brian@xxxxxxxxxxxxxxxx
• ANNOUNCE - mdadm 0.8 - candidate for 1.0
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Re: Update on Promise 100TX2 + Serverworks IDE issues -- 2.2.20
  • From: jim@xxxxxxxxxxxx
• Re: Update on Promise 100TX2 + Serverworks IDE issues -- 2.2.20
  • From: jim@xxxxxxxxxxxx
• Re: Update on Promise 100TX2 + Serverworks IDE issues -- 2.2.20
  • From: Alan Cox <alan@xxxxxxxxxxxxxxxxxxx>
• Re: Update on Promise 100TX2 + Serverworks IDE issues -- 2.2.20
  • From: "Jeff Nguyen" <jeff@xxxxxxxxx>
• Re: Update on Promise 100TX2 + Serverworks IDE issues -- 2.2.20
  • From: Alan Cox <alan@xxxxxxxxxxxxxxxxxxx>
• Re: Update on Promise 100TX2 + Serverworks IDE issues -- 2.2.20
  • From: Trent Piepho <xyzzy@xxxxxxxxxxxxx>
• Update on Promise 100TX2 + Serverworks IDE issues -- 2.2.20
  • From: jim@xxxxxxxxxxxx
• My Bootable Linux RAID 1 success and a few questions
  • From: brian@xxxxxxxxxxxxxxxx
• Re: RAID 1 always need to reconstruct (solved)
  • From: brian@xxxxxxxxxxxxxxxx
• Re: Kernel 2.4 and Swap (solved)
  • From: Ben Collins <bcollins@xxxxxxxxxx>
• Re: Kernel 2.4 and Swap (solved)
  • From: David Morris <lists@xxxxxxxxxxxxxxx>
• Kernel 2.4 and Swap (solved)
  • From: David Morris <lists@xxxxxxxxxxxxxxx>
• Re: Raid-5 autodetection problem
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Raid-5 autodetection problem
  • From: Steven Rodenburg <steven.rodenburg@xxxxxxxxx>
• Re: [LARGE] Something strange with booting from raid1 .
  • From: "Mr. James W. Laferriere" <babydr@xxxxxxxxxxxxxxxx>
• Re: RAID 1 always need to reconstruct
  • From: brian@xxxxxxxxxxxxxxxx
• Re: [LARGE] Something strange with booting from raid1 .
  • From: "Mr. James W. Laferriere" <babydr@xxxxxxxxxxxxxxxx>
• [LARGE] Something strange with booting from raid1 .
  • From: "Mr. James W. Laferriere" <babydr@xxxxxxxxxxxxxxxx>
• Recovery from Raid1 "failure"
  • From: Stephen Lee <splee@xxxxxxxxxx>
• Re: RAID 1 always need to reconstruct
  • From: "Mr. James W. Laferriere" <babydr@xxxxxxxxxxxxxxxx>
• Booting from RAID-1 on a Sparc with 2.4 kenrel
  • From: David Morris <lists@xxxxxxxxxxxxxxx>
• Re: Read Only RAID5
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Re: RAID 1 always need to reconstruct
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Re: raid5: switching cache buffer size log spam
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• raid5: switching cache buffer size log spam
  • From: dean gaudet <dean-list-linux-kernel@xxxxxxxxxx>
• Re: Moving devices in an array
  • From: Jakob Østergaard <jakob@xxxxxxxxxxxxx>
• Moving devices in an array
  • From: brian@xxxxxxxxxxxxxxxx
• hanging at partition check
  • From: "Stefan Goerres" <lists@xxxxxxxxxxx>
• Re: RAID 1 always need to reconstruct
  • From: brian@xxxxxxxxxxxxxxxx
• RAID 1 always need to reconstruct
  • From: brian@xxxxxxxxxxxxxxxx
• Read Only RAID5
  • From: Andy Smith <asmith@xxxxxxxxxxxxxx>
• Re: RAID 5 faster than RAID 1
  • From: "Mike Black" <mblack@xxxxxxxxx>
• RE: SW RAID6 ?
  • From: "Stephenson, Dale" <dstephenson@xxxxxxxxxxxxxx>
• RAID 5 faster than RAID 1
  • From: "Gernot A. Weber" <gernot@xxxxxxxxxx>
• Re: /boot, /root on raid 5
  • From: Mads Peter Bach <mpb@xxxxxxxxxxxxxxxxxxxx>
• /boot, /root on raid 5
  • From: "Gernot A. Weber" <gernot@xxxxxxxxxx>
• lilo + raid1 problem (with me :)
  • From: Alvaro Reguly <raid+news@xxxxxxxxxx>
• Re: Linux RAID bug?
  • From: "Rob MacGregor" <rob_macgregor@xxxxxxxxxxx>
• Re: RAID-5 on SS20
  • From: Gregory Leblanc <gleblanc@xxxxxxxxxxxxxxx>
• Re: RAID-5 on SS20
  • From: David Morris <lists@xxxxxxxxxxxxxxx>
• Re: RAID-5 on SS20
  • From: Gregory Leblanc <gleblanc@xxxxxxxxxxxxxxx>
• RAID-5 on SS20
  • From: David Morris <lists@xxxxxxxxxxxxxxx>
• Re: Linux RAID bug?
  • From: Maurice Hilarius <maurice@xxxxxxxxxxxx>
• Re: Linux RAID bug?
  • From: "Rob MacGregor" <rob_macgregor@xxxxxxxxxxx>
• Re: Linux RAID bug?
  • From: "Rob MacGregor" <rob_macgregor@xxxxxxxxxxx>
• Re: Linux RAID bug?
  • From: Friedrich Lobenstock <fl@xxxxxxxxxx>
• Re: Linux RAID bug?
  • From: "Rob MacGregor" <rob_macgregor@xxxxxxxxxxx>
• RE: SW RAID6 ?
  • From: "Laurence Berland" <l-berland@xxxxxxxxxxxxxxxx>
• Re: SW RAID6 ?
  • From: Marcel <marcelb@xxxxxxxxxx>
• Re: SW RAID6 ?
  • From: Gregory Leblanc <gleblanc@xxxxxxxxxxxxxxx>
• AW: SW RAID6 ?
  • From: "Martin Bene" <martin.bene@xxxxxxxxxxxxx>
• Re: SW RAID6 ?
  • From: Jakob Østergaard <jakob@xxxxxxxxxxxxx>
• Re: SW RAID6 ?
  • From: Frank Samuelson <sam@xxxxxxxxxxxxxxxx>
• Re: SW RAID6 ?
  • From: Derek Vadala <derek@xxxxxxxxxxxx>
• RE: SW RAID6 ?
  • From: "Stephenson, Dale" <dstephenson@xxxxxxxxxxxxxx>
• Re: SW RAID6 ?
  • From: "Mr. James W. Laferriere" <babydr@xxxxxxxxxxxxxxxx>
• RE: SW RAID6 ?
  • From: Frank Samuelson <sam@xxxxxxxxxxxxxxxx>
• Re: SW RAID6 ?
  • From: Ross Vandegrift <ross@xxxxxxxxxxxxxxxx>
• Re: Linux RAID bug?
  • From: Ross Vandegrift <ross@xxxxxxxxxxxxxxxx>
• RE: SW RAID6 ?
  • From: "Stephenson, Dale" <dstephenson@xxxxxxxxxxxxxx>
• Re: Linux RAID bug?
  • From: Friedrich Lobenstock <fl@xxxxxxxxxx>
• Re: SW RAID6 ?
  • From: Ross Vandegrift <ross@xxxxxxxxxxxxxxxx>
• Linux RAID bug?
  • From: "Rob MacGregor" <rob_macgregor@xxxxxxxxxxx>
• Re: SW RAID6 ?
  • From: Marcel <marcelb@xxxxxxxxxx>
• Re: SW RAID6 ?
  • From: Ross Vandegrift <ross@xxxxxxxxxxxxxxxx>
• RE: SW RAID6 ?
  • From: Frank Samuelson <sam@xxxxxxxxxxxxxxxx>
• RE: SW RAID6 ?
  • From: Maurice Hilarius <maurice@xxxxxxxxxxxx>
• RE: SW RAID6 ?
  • From: "Rechenberg, Andrew" <ARechenberg@xxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: SW RAID6 ?
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• SW RAID6 ?
  • From: "Martin Eriksson" <c97men@xxxxxxxxx>
• Re: reboot hanging at partition check using raid1 .
  • From: "Mr. James W. Laferriere" <babydr@xxxxxxxxxxxxxxxx>
• reboot hanging at partition check using raid1 .
  • From: "Mr. James W. Laferriere" <babydr@xxxxxxxxxxxxxxxx>
• Re: linux-raid fatal: duplicate geometry
  • From: "Mr. James W. Laferriere" <babydr@xxxxxxxxxxxxxxxx>
• linux-raid fatal: duplicate geometry
  • From: "Mr. James W. Laferriere" <babydr@xxxxxxxxxxxxxxxx>
• Re: md incompatibility with HPT372 ?
  • From: Vincent Bernat <bernat@xxxxxxx>
• Re: 2.4.19-pre4 aic7xxx problems
  • From: "Diamon" <diamon@xxxxxx>
• Re: 2.4.19-pre4 aic7xxx problems
  • From: "Mike Black" <mblack@xxxxxxxxx>
• Re: Raid: cant hot add disk: / = md0, / = hdc1 at the same time?
  • From: Danilo Godec <danci@xxxxxxxxx>
• Raid: cant hot add disk: / = md0, / = hdc1 at the same time?
  • From: James Bromberger <james@xxxxxxx>
• Re: 2.4.19-pre4 aic7xxx problems
  • From: Friedrich Lobenstock <fl@xxxxxxxxxx>
• Re: 2.4.19-pre4 aic7xxx problems
  • From: "Mike Black" <mblack@xxxxxxxxx>
• Re: 2.4.19-pre4 aic7xxx problems
  • From: "Mike Black" <mblack@xxxxxxxxx>
• Re: 2.4.19-pre4 aic7xxx problems
  • From: "Mike Black" <mblack@xxxxxxxxx>
• Re: 2.4.19-pre4 aic7xxx problems
  • From: "Mike Black" <mblack@xxxxxxxxx>
• Re: 2.4.19-pre4 aic7xxx problems
  • From: Alan Cox <alan@xxxxxxxxxxxxxxxxxxx>
• Re: 2.4.19-pre4 aic7xxx problems
  • From: "Mike Black" <mblack@xxxxxxxxx>
• Re: 2.4.19-pre4 aic7xxx problems
  • From: Alan Cox <alan@xxxxxxxxxxxxxxxxxxx>
• Re: 2.4.19-pre4 aic7xxx problems
  • From: "Mike Black" <mblack@xxxxxxxxx>
• make/configure brokenness
  • From: Tony den Haan <tony@xxxxxxxxx>
• Re: data corruption - the nightmare continues (now I hate IBM)
  • From: Anders Peter Fugmann <afu@xxxxxxxxxxxxxxx>
• minimun patch list?
  • From: "Stefan Goerres" <lists@xxxxxxxxxxx>
• Re: Problems with fsck on boot
  • From: Christopher Penney <penney@xxxxxxxxxxx>
• Re: Problems with fsck on boot
  • From: Christopher Penney <penney@xxxxxxxxxxx>
• Re: AW: data corruption - the nightmare continues
  • From: "Mike Black" <mblack@xxxxxxxxx>
• Re: Typo in Assemble.c
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Problems with fsck on boot
  • From: Christopher Penney <penney@xxxxxxxxxxx>
• Re: AW: data corruption - the nightmare continues (now I hate IBM)
  • From: Justin <jb@xxxxxxxxxxxxxx>
• Re: AW: data corruption - the nightmare continues
  • From: Derek Vadala <derek@xxxxxxxxxxxx>
• Re: AW: data corruption - the nightmare continues
  • From: Justin <jb@xxxxxxxxxxxxxx>
• Re: AW: data corruption - the nightmare continues
  • From: Jakob Østergaard <jakob@xxxxxxxxxxxxx>
• Re: convert raid to non-raid and vice versa ?
  • From: Nick Kay <nick@xxxxxxxxxxxx>
• convert raid to non-raid and vice versa ?
  • From: Rainer Fuegenstein <rfu@xxxxxxxxxxxxxxxxxxxxxxxx>
• Re: data corruption - the nightmare continues
  • From: Rainer Fuegenstein <rfu@xxxxxxxxxxxxxxxxxxxxxxxx>
• RAID: mkraid Crashes, HELP!
  • From: "Quang Nguyen \(Ngo\)" <quang@xxxxxxxxxxxx>
• Re: data corruption - the nightmare continues
  • From: Justin <jb@xxxxxxxxxxxxxx>
• AW: data corruption - the nightmare continues
  • From: "Martin Bene" <martin.bene@xxxxxxxxxxxxx>
• Re: data corruption - the nightmare continues
  • From: Jakob Østergaard <jakob@xxxxxxxxxxxxx>
• Re: data corruption - the nightmare continues
  • From: Justin <jb@xxxxxxxxxxxxxx>
• Re: data corruption - the nightmare continues
  • From: Jakob Østergaard <jakob@xxxxxxxxxxxxx>
• Re: data corruption - the nightmare continues
  • From: "Mike Black" <mblack@xxxxxxxxx>
• booting/swap questions
  • From: "Kevin M. Shortt" <shortt@xxxxxxxxxxx>
• Re: data corruption - the nightmare continues
  • From: Justin <jb@xxxxxxxxxxxxxx>
• Re: data corruption - the nightmare continues
  • From: Marcel <marcelb@xxxxxxxxxx>
• Re: md incompatibility with HPT372 ?
  • From: Eyal Lebedinsky <eyal@xxxxxxxxxxxxxx>
• data corruption - the nightmare continues
  • From: Rainer Fuegenstein <rfu@xxxxxxxxxxxxxxxxxxxxxxxx>
• Re: md incompatibility with HPT372 ?
  • From: Jakob Østergaard <jakob@xxxxxxxxxxxxx>
• Re: md incompatibility with HPT372 ?
  • From: Vincent Bernat <bernat@xxxxxxx>
• Re: md incompatibility with HPT372 ?
  • From: Jakob Østergaard <jakob@xxxxxxxxxxxxx>
• md incompatibility with HPT372 ?
  • From: Vincent Bernat <bernat@xxxxxxx>
• 2.4.17 RAID1 oopses when shut down in degraded mode
  • From: KELEMEN Peter <fuji@xxxxxxx>
• Typo in Assemble.c
  • From: Junaid Rizvi <domdev@xxxxxxxxxx>
• Re: Raid5 race patch (fwd)
  • From: Matjaz Godec <gody@xxxxxxxxxxxxxxx>
• Startup problems
  • From: "Mike Black" <mblack@xxxxxxxxx>
• Re: Partition table
  • From: Marcel <marcelb@xxxxxxxxxx>
• Re: ANNOUNCE - mdadm 0.7.1
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Re: Partition table
  • From: "Stefan Goerres" <lists@xxxxxxxxxxx>
• Re: mdctl --assemble --scan , Not funtioning as expected .
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Re: Partition table
  • From: Marcel <marcelb@xxxxxxxxxx>
• mdctl --assemble --scan , Not funtioning as expected .
  • From: "Mr. James W. Laferriere" <babydr@xxxxxxxxxxxxxxxx>
• Partition table
  • From: "Stefan Goerres" <lists@xxxxxxxxxxx>
• Re: ANNOUNCE - mdadm 0.7.1
  • From: "Mr. James W. Laferriere" <babydr@xxxxxxxxxxxxxxxx>
• Re: ANNOUNCE - mdadm 0.7.1
  • From: "Mr. James W. Laferriere" <babydr@xxxxxxxxxxxxxxxx>
• Re: HPT370 chipset and 2.2.xx.
  • From: Brad Hubbard <brad@xxxxxxxxxxxxxxxx>
• Re: ANNOUNCE - mdadm 0.7.1
  • From: Luca Berra <bluca@xxxxxxxxxx>
• Re: Raid5 race patch (fwd)
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Re: ANNOUNCE - mdadm 0.7.1
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Re: ANNOUNCE - mdadm 0.7.1
  • From: Derek Vadala <derek@xxxxxxxxxxxx>
• Re: mdadm-0.7 2TB detail
  • From: Derek Vadala <derek@xxxxxxxxxxxx>
• Re: ANNOUNCE - mdadm 0.7.1
  • From: "Mr. James W. Laferriere" <babydr@xxxxxxxxxxxxxxxx>
• Re: Raid5 race patch (fwd)
  • From: Matjaz Godec <gody@xxxxxxxxxxxxxxx>
• Re: Raid5 race patch (fwd)
  • From: Matjaz Godec <gody@xxxxxxxxxxxxxxx>
• Re: Raid5 race patch (fwd)
  • From: Matjaz Godec <gody@xxxxxxxxxxxxxxx>
• Re: ANNOUNCE - mdadm 0.7.1
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Re: ANNOUNCE - mdadm 0.7.1
  • From: Luca Berra <bluca@xxxxxxxxxx>
• ANNOUNCE - mdadm 0.7.1
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Re: mdadm-0.7 2TB detail
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Re: Raid5 race patch (fwd)
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Re: Raid5 race patch (fwd)
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Re: Bugs & TODO list
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• HPT370 chipset and 2.2.xx.
  • From: Richard Adams <pa3gcu@xxxxxxxxxxxxx>
• SIIG Ultra ATA/133
  • From: "Gary Ingram" <gingram@xxxxxxxxx>
• Re: Raid5 race patch (fwd)
  • From: Matjaz Godec <gody@xxxxxxxxxxxxxxx>
• Re: Raid5 race patch (fwd)
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Re: Raid5 race patch (fwd)
  • From: Matjaz Godec <gody@xxxxxxxxxxxxxxx>
• Re: Raid5 race patch (fwd)
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Re: mdadm-0.7 2TB detail
  • From: Derek Vadala <derek@xxxxxxxxxxxx>
• Re: mdadm 0.7 shows identical information raid1 members of raid0
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Re: Winfast ATA100
  • From: Pieter Hollants <pieter@xxxxxxxxxxxx>
• Winfast ATA100
  • From: Brad Hubbard <brad@xxxxxxxxxxxxxxxx>
• RE: SCSI Problem 2.4.19-pre2-ac3
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Re: mdadm 0.7 shows identical information raid1 members of raid0
  • From: Derek Vadala <derek@xxxxxxxxxxxx>
• RE: SCSI Problem 2.4.19-pre2-ac3
  • From: Fredrik Lindgren <fli@xxxxxxxxx>
• Re: Raid5 race patch (fwd)
  • From: Matjaz Godec <gody@xxxxxxxxxxxxxxx>
• Re: Additional options for mdctl-0.5
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Re: mdadm-0.7 2TB detail
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Re: mdadm 0.7 shows identical information raid1 members of raid0
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Re: linux 2.5.6 (and -pre1) left raid array in unclean mode -> kernelbug at raid1.c:656
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Re: ANNOUCE: mdctl 0.6 available
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Re: ANNOUCE: mdctl 0.6 available
  • From: "Mr. James W. Laferriere" <babydr@xxxxxxxxxxxxxxxx>
• Re: ANNOUCE: mdctl 0.6 available
  • From: "Mr. James W. Laferriere" <babydr@xxxxxxxxxxxxxxxx>
• Re: ANNOUCE: mdctl 0.6 available
  • From: "Mr. James W. Laferriere" <babydr@xxxxxxxxxxxxxxxx>
• Re: 2TB finally synced
  • From: Mike Black <mike@xxxxxxxxxxxxxxxx>
• 2TB finally synced
  • From: "Mike Black" <mblack@xxxxxxxxx>
• linux 2.5.6 (and -pre1) left raid array in unclean mode -> kernelbug at raid1.c:656
  • From: Jani Averbach <jaa@xxxxxxxxx>
• mdadm-0.7 2TB detail
  • From: "Mike Black" <mblack@xxxxxx>
• Re: mdadm 0.7 shows identical information raid1 members of raid0
  • From: Derek Vadala <derek@xxxxxxxxxxxx>
• Re: Additional options for mdctl-0.5
  • From: Derek Vadala <derek@xxxxxxxxxxxx>
• Re: Additional options for mdctl-0.5
  • From: Jeff Hill <jhill@xxxxxxxxxxxx>
• Re: SCSI Problem 2.4.19-pre2-ac3
  • From: Alan Cox <alan@xxxxxxxxxxxxxxxxxxx>
• SCSI Problem 2.4.19-pre2-ac3
  • From: "Mike Black" <mblack@xxxxxxxxx>
• Re: Additional options for mdctl-0.5
  • From: Friedrich Lobenstock <fl@xxxxxxxxxx>
• raid1 performance
  • From: Tobias Stefan Richter <tsr@xxxxxxxxx>
• raid members failed?
  • From: "Stefan Goerres" <lists@xxxxxxxxxxx>
• Re: mdadm 0.7 shows identical information raid1 members of raid0
  • From: Derek Vadala <derek@xxxxxxxxxxxx>
• mdadm 0.7 shows identical information raid1 members of raid0
  • From: "Jeffrey W. Baker" <jwbaker@xxxxxxx>
• RE: Additional options for mdctl-0.5
  • From: "Stephenson, Dale" <dstephenson@xxxxxxxxxxxxxx>
• Re: Raid5 race patch (fwd)
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Re: confusing mkraid problems
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Re: ANNOUCE: mdctl 0.6 available (mdadm 0.7 now available)
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Re: Additional options for mdctl-0.5
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• RH7.2, RAID1, how to recover?
  • From: "Frank Isaacs" <frank@xxxxxxxxxxxxxxxxxxxxx>
• Additional options for mdctl-0.5
  • From: "Stephenson, Dale" <dstephenson@xxxxxxxxxxxxxx>
• grub
  • From: Kai Wilke <kiste@xxxxxxxxxxxx>
• ANNOUCE: mdctl 0.6 available
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Re: ext3 on Linux software RAID1
  • From: Andrew Morton <akpm@xxxxxxxxxx>
• Re: ext3 on Linux software RAID1
  • From: "Stephen C. Tweedie" <sct@xxxxxxxxxx>
• Question about monitoring Multipath status
  • From: Li Zhou <lzhou@xxxxxxxxxx>
• Re: raid 0 acting up.
  • From: Marcel B <marcelb@xxxxxxxxxx>
• Linux-2.4.19-pre2-ac2 Oops
  • From: "Mike Black" <mblack@xxxxxx>
• Oopses in 2.4.16
  • From: "Mike Black" <mblack@xxxxxxxxx>
• raid 0 acting up.
  • From: "Dan Adelman" <dan@xxxxxxxx>
• Faulty marks.
  • From: Frank Samuelson <sam@xxxxxxxxxxxxxxxx>
• possible buffer overruns in /proc/mdstat and raid in 2.4.16 kernel
  • From: George Goble <ghg@xxxxxxxxxxxxxx>
• Re: Raid5 race patch (fwd)
  • From: Matjaz Godec <gody@xxxxxxxxxxxxxxx>
• Re: Raid5 race patch (fwd)
  • From: Matjaz Godec <gody@xxxxxxxxxxxxxxx>
• Re: ext3 on Linux software RAID1
  • From: Andrew Morton <akpm@xxxxxxxxxx>
• confusing mkraid problems
  • From: l-berland@xxxxxxxxxxxxxxxx
• Re: ext3 on Linux software RAID1
  • From: Matti Aarnio <matti.aarnio@xxxxxxxxxxx>
• Re: Raid5 race patch (fwd)
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Re: Raid5 race patch (fwd)
  • From: Matjaz Godec <gody@xxxxxxxxxxxxxxx>
• Re: ext3 on Linux software RAID1
  • From: Gregory Leblanc <gleblanc@xxxxxxxxxxxxxxx>
• ext3 on Linux software RAID1
  • From: "Rechenberg, Andrew" <ARechenberg@xxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: RAID1+LVM
  • From: Luca Berra <bluca@xxxxxxxxxx>
• Re: Howto use or readings for mdctl.conf
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Re: [PATCH] md.c semaphore updates
  • From: Ross Vandegrift <ross@xxxxxxxxxxxxxxxx>
• RE: Lilo problem with RAID1
  • From: "Cress, Andrew R" <andrew.r.cress@xxxxxxxxx>
• Re: Raid5 race patch (fwd)
  • From: Matjaz Godec <gody@xxxxxxxxxxxxxxx>
• Re: [PATCH] md.c semaphore updates
  • From: Ross Vandegrift <ross@xxxxxxxxxxxxxxxx>
• Re: RAID1+LVM
  • From: Pieter Hollants <pieter@xxxxxxxxxxxx>
• Re: [PATCH] md.c semaphore updates
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Re: Raid5 race patch (fwd)
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Re: RAID1+LVM
  • From: Luca Berra <bluca@xxxxxxxxxx>
• Re: Raid5 race patch (fwd)
  • From: Matjaz Godec <gody@xxxxxxxxxxxxxxx>
• HPT 370 raid problems
  • From: shura <shura@xxxxxxx>
• RAID1+LVM
  • From: mikael.sjogren@xxxxxxxx
• [PATCH] md.c semaphore updates
  • From: Ross Vandegrift <ross@xxxxxxxxxxxxxxxx>
• Reproductable kernel bug at raid1.c:656
  • From: Jani Averbach <jaa@xxxxxxxxx>
• Re: setting "debug level"
  • From: Micah Anderson <micah@xxxxxxxxxx>
• anybody know of an sd.c driver or equiv with no partitions?
  • From: George Goble <ghg@xxxxxxxxxxxxxx>
• setting "debug level"
  • From: Marcel <marcelb@xxxxxxxxxx>
• Re: Raid5 race patch (fwd)
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Re: Raid5 race patch (fwd)
  • From: Ross Vandegrift <ross@xxxxxxxxxxxxxxxx>
• Re: Raid5 race patch (fwd)
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Re: How Do You Move Partitions from one raid-1device to another?
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• How Do You Move Partitions from one raid-1device to another?
  • From: Jeff Hill <jhill@xxxxxxxxxxxx>
• Lilo problem with RAID1
  • From: Mark Nellemann <mark@xxxxxxxxxxx>
• Re: help needed with mdctl
  • From: Carlos Carvalho <carlos@xxxxxxxxxxxxxx>
• Re: help needed with mdctl
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Re: help needed with mdctl
  • From: Carlos Carvalho <carlos@xxxxxxxxxxxxxx>
• Re: Raid5 race patch (fwd)
  • From: Matjaz Godec <gody@xxxxxxxxxxxxxxx>
• Re: mdctl - a lifesaver
  • From: Alvin Oga <aoga@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: mdctl - a lifesaver
  • From: Jakob Østergaard <jakob@xxxxxxxxxxxxx>
• mdctl - a lifesaver
  • From: George Goble <ghg@xxxxxxxxxxxxxx>
• Re: dumb questions
  • From: Jakob Østergaard <jakob@xxxxxxxxxxxxx>
• Re: dumb questions
  • From: "sjb" <ottaky@xxxxxxxxxx>
• RE: dumb questions
  • From: "Werner, Markus" <Markus.Werner@xxxxxxxxxxxxxxx>
• dumb questions
  • From: "sjb" <ottaky@xxxxxxxxxx>
• Re: help needed with mdctl
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Re: [RAID] Scripts watch SW RAID1 for HD failure - mdctl
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Re: Raid5 race patch (fwd)
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Re: raid5: multiple 0 requests for sector ...
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Re: raid5: multiple 0 requests for sector ...
  • From: Matti Aarnio <matti.aarnio@xxxxxxxxxxx>
• Re: raid5: multiple 0 requests for sector ...
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Re: raid5: multiple 0 requests for sector ...
  • From: Andy Smith <asmith@xxxxxxxxxxxxxx>
• Re: raid5: multiple 0 requests for sector ...
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Re: raid5: multiple 0 requests for sector ...
  • From: Andy Smith <asmith@xxxxxxxxxxxxxx>
• raid5: multiple 0 requests for sector ...
  • From: Andy Smith <asmith@xxxxxxxxxxxxxx>
• AW: perfomance on IDE-Raid
  • From: "Martin Bene" <martin.bene@xxxxxxxxxxxxx>
• Re: 3ware cards and drive failures (was Re: perfomance on IDE-Raid)
  • From: Gregory Leblanc <gleblanc@xxxxxxxxxxxxxxx>
• RE: raidsetfaulty / mdctl --fail problem
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• RE: raidsetfaulty / mdctl --fail problem
  • From: Brinley Craig <brinley.craig@xxxxxxxxxxxxxxxx>
• Re: Raid problems.
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Re: bug in file md.c, line 2334 + RAID1 reconstruction after crash
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Re: raidsetfaulty / mdctl --fail problem
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Re: creating raid with existing data?
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Re: perfomance on IDE-Raid
  • From: Kristian Hoffmann <khoff@xxxxxxxxxxxxxx>
• Re: mdctl & adding a new drive to a RAID-1 array
  • From: Jakob Østergaard <jakob@xxxxxxxxxxxxx>
• Re: mdctl & adding a new drive to a RAID-1 array
  • From: "Jordan Russell" <jr-list-linuxraid@xxxxxx>
• Re: mdctl & adding a new drive to a RAID-1 array
  • From: Chris Hirsch <chris@xxxxxxxxxxxxxxxxxxx>
• Re: mdctl & adding a new drive to a RAID-1 array
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Re: mdctl & adding a new drive to a RAID-1 array
  • From: "Jordan Russell" <jr-list-linuxraid@xxxxxx>
• Re: raid 5 problems-- won't start
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Re: mdctl & adding a new drive to a RAID-1 array
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• mdctl & adding a new drive to a RAID-1 array
  • From: "Jordan Russell" <jr-list-linuxraid@xxxxxx>
• Re: perfomance on IDE-Raid
  • From: Gregory Leblanc <gleblanc@xxxxxxxxxxxxxxx>
• [BUG] multipath configuration
  • From: Stephen Cameron <steve.cameron@xxxxxxxxxx>
• raid 5 problems-- won't start
  • From: Frank Samuelson <sam@xxxxxxxxxxxxxxxx>
• bug in file md.c, line 2334 + RAID1 reconstruction after crash
  • From: Mark Burton <markb@xxxxxxxxxx>
• Re: mdctl config (was Re: Using mdctl for replacing failed disk)
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Re: Pre 2.4 heads up ;)
  • From: Jakob Østergaard <jakob@xxxxxxxxxxxxx>
• Re: Pre 2.4 heads up ;)
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• RAID and grub?
  • From: Micah Anderson <micah@xxxxxxxxxx>
• [micah@xxxxxxxxxx: creating raid with existing data?]
  • From: Micah Anderson <micah@xxxxxxxxxx>
• Re: Pre 2.4 heads up ;)
  • From: Jakob Østergaard <jakob@xxxxxxxxxxxxx>
• Re: Pre 2.4 heads up ;)
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Pre 2.4 heads up ;)
  • From: Jakob Østergaard <jakob@xxxxxxxxxxxxx>
• Re: RAID-1 over network?
  • From: Jakob Østergaard <jakob@xxxxxxxxxxxxx>
• Re: perfomance on IDE-Raid
  • From: Nils Rennebarth <nils@xxxxxxxxxxxxxxxxxxxx>
• RE: two questions + a 1tb ide array
  • From: Fredrik Lindgren <fli@xxxxxxxxx>
• AW: RAID-1 over network?
  • From: "Martin Bene" <martin.bene@xxxxxxxxxxxxx>
• Re: RAID-1 over network?
  • From: Ross Vandegrift <ross@xxxxxxxxxxxxxxxx>
• creating raid with existing data?
  • From: Micah Anderson <micah@xxxxxxxxxx>
• raidsetfaulty / mdctl --fail problem
  • From: Brinley Craig <brinley.craig@xxxxxxxxxxxxxxxx>
• Re: perfomance on IDE-Raid
  • From: "Mr. James W. Laferriere" <babydr@xxxxxxxxxxxxxxxx>
• Re: two questions + a 1tb ide array
  • From: Justin <jb@xxxxxxxxxxxxxx>
• Re: two questions + a 1tb ide array
  • From: Jakob Østergaard <jakob@xxxxxxxxxxxxx>
• Re: two questions + a 1tb ide array
  • From: Max TenEyck Woodbury <mtew@xxxxxxxxxxxx>
• Re: RAID-1 over network?
  • From: "Jordan Russell" <jr-list-linuxraid@xxxxxx>
• Re: perfomance on IDE-Raid
  • From: Trent Piepho <xyzzy@xxxxxxxxxxxxx>
• Re: RAID-1 over network?
  • From: Dave Jones <davej@xxxxxxx>
• Re: RAID-1 over network?
  • From: Alistair Riddell <ali@xxxxxxxxxx>
• Re: RAID-1 over network?
  • From: Ross Vandegrift <ross@xxxxxxxxxxxxxxxx>
• Re: perfomance on IDE-Raid
  • From: David Rees <dbr@xxxxxxxxxxxxxxxx>
• Re: perfomance on IDE-Raid
  • From: Jakob Østergaard <jakob@xxxxxxxxxxxxx>
• RAID-1 over network?
  • From: "Jordan Russell" <jr-list-linuxraid@xxxxxx>
• Re: perfomance on IDE-Raid
  • From: Trent Piepho <xyzzy@xxxxxxxxxxxxx>
• Re: perfomance on IDE-Raid
  • From: David Rees <dbr@xxxxxxxxxxxxxxxx>
• Re: perfomance on IDE-Raid
  • From: ritz@xxxxxxxxxx (Chris Mauritz)
• Re: Q: Booting /dev/sda (3ware 7850) fails? Ideas?
  • From: Mads Peter Bach <mpb@xxxxxxxxxxxxxxxxxxxx>
• Re: two questions + a 1tb ide array
  • From: Jakob Østergaard <jakob@xxxxxxxxxxxxx>
• AW: perfomance on IDE-Raid
  • From: "Martin Bene" <martin.bene@xxxxxxxxxxxxx>
• Re: perfomance on IDE-Raid
  • From: Gregory Leblanc <gleblanc@xxxxxxxxxxxxxxx>
• Re: Q: Booting /dev/sda (3ware 7850) fails? Ideas?
  • From: ritz@xxxxxxxxxx (Chris Mauritz)
• Re: two questions + a 1tb ide array
  • From: Justin <jb@xxxxxxxxxxxxxx>
• Re: Raid-5, LVM, Reiser FS
  • From: Chris Hirsch <chris@xxxxxxxxxxxxxxxxxxx>
• Re: perfomance on IDE-Raid
  • From: ritz@xxxxxxxxxx (Chris Mauritz)
• Q: Booting /dev/sda (3ware 7850) fails? Ideas?
  • From: Brian <brian@xxxxxxxxxxxxxxxxxxxx>
• Re: two questions + a 1tb ide array
  • From: Jakob Østergaard <jakob@xxxxxxxxxxxxx>
• Re: perfomance on IDE-Raid
  • From: Jakob Østergaard <jakob@xxxxxxxxxxxxx>
• Re: two questions + a 1tb ide array
  • From: Jakob Østergaard <jakob@xxxxxxxxxxxxx>
• Re: perfomance on IDE-Raid
  • From: ritz@xxxxxxxxxx (Chris Mauritz)
• perfomance on IDE-Raid
  • From: kb@xxxxxxxxxxxxxxxxx
• Re: Raid problems.
  • From: Gregory Leblanc <gleblanc@xxxxxxxxxxxxxxx>
• Raid problems.
  • From: "Brandon Amundson" <bamundson@xxxxxxx>
• Re: two questions + a 1tb ide array
  • From: Justin <jb@xxxxxxxxxxxxxx>
• Re: two questions + a 1tb ide array
  • From: Alvin Oga <aoga@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• two questions + a 1tb ide array
  • From: Justin <jb@xxxxxxxxxxxxxx>
• 2.5 TODO, was: Re: 2.5.5-pre1 raid5 compile fails
  • From: Dave Jones <davej@xxxxxxx>
• 2.5.5-pre1 raid5 compile fails
  • From: Brak <brak@xxxxxxxxx>
• Re: Moving raid array to a different IDE controller
  • From: Mike Tran <mhtran@xxxxxxxxxx>
• Raid5 race patch (fwd)
  • From: Danilo Godec <danci@xxxxxxxxx>
• RE: RAID1 array not actively mirroring
  • From: "Rechenberg, Andrew" <arechenberg@xxxxxxxxxxxx>
• RAID1 array not actively mirroring
  • From: "Rechenberg, Andrew" <arechenberg@xxxxxxxxxxxx>
• RE: Raid-5, LVM, Reiser FS
  • From: "Stephenson, Dale" <dstephenson@xxxxxxxxxxxxxx>
• Re: Raid-5, LVM, Reiser FS
  • From: Edward Shushkin <edward@xxxxxxxxxxx>
• Re: mdctl config (was Re: Using mdctl for replacing failed disk)
  • From: "Mr. James W. Laferriere" <babydr@xxxxxxxxxxxxxxxx>
• Re: Raid-5, LVM, Reiser FS
  • From: Ross Vandegrift <ross@xxxxxxxxxxxxxxxx>
• RE: Raid-5, LVM, Reiser FS
  • From: "Cajoline" <cajoline@xxxxxxxxxxxxxx>
• Re: Raid-5, LVM, Reiser FS
  • From: Jakob Østergaard <jakob@xxxxxxxxxxxxx>
• Re: Raid-5, LVM, Reiser FS
  • From: Matteo Centonza <matteo@xxxxxx>
• Re: mdctl issues
  • From: "Tim Kent" <Tim.Kent@xxxxxxxxxxxxxxxxxxxxx>
• Re: Raid-5, LVM, Reiser FS
  • From: Alvin Oga <aoga@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: Raid-5, LVM, Reiser FS
  • From: Gregory Leblanc <gleblanc@xxxxxxxxxxxxxxx>
• Re: mdctl config (was Re: Using mdctl for replacing failed disk)
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Re: Using mdctl for replacing failed disk
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Raid-5, LVM, Reiser FS
  • From: Chris Hirsch <chris@xxxxxxxxxxxxxxxxxxx>
• mdctl config (was Re: Using mdctl for replacing failed disk)
  • From: "Mr. James W. Laferriere" <babydr@xxxxxxxxxxxxxxxx>
• Using mdctl for replacing failed disk
  • From: Ian Thurlbeck <ian@xxxxxxxxxxxxxxxxxx>
• Moving raid array to a different IDE controller
  • From: Paul Flinders <P.Flinders@xxxxxxxxxx>
• Re: Problem with RAID-1, 2 IDE disks, Linux Red Hat 7.0
  • From: Danilo Godec <danci@xxxxxxxxx>
• Problem with RAID-1, 2 IDE disks, Linux Red Hat 7.0
  • From: "Daniel Paul" <dpaul@xxxxxxx>
• Re: RAID-1, identical disks recognised differently
  • From: Alvin Oga <aoga@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: RAID-1, identical disks recognised differently
  • From: raid@xxxxxxxxxxxx
• Re: HP Netserver LD Pro
  • From: Shane Hickey <shane@xxxxxxxxxxxxxxxxxxx>
• Re: RAID-1, identical disks recognised differently
  • From: Kanoa Withington <kanoa@xxxxxxxxxxxxxxx>
• Re: [RAID] Scripts watch SW RAID1 for HD failure - mdctl
  • From: Junaid Rizvi <domdev@xxxxxxxxxx>
• Re: RAID-1, identical disks recognised differently
  • From: Danilo Godec <danci@xxxxxxxxx>
• Re: RAID-1, identical disks recognised differently
  • From: Mikael Johansson <mpjohans@xxxxxxxxxxxxxxx>
• Re: RAID-1, identical disks recognised differently
  • From: Kanoa Withington <kanoa@xxxxxxxxxxxxxxx>
• Re: RAID-1, identical disks recognised differently
  • From: Alvin Oga <aoga@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• RE: RAID-1, identical disks recognised differently
  • From: "Martin Bene" <martin.bene@xxxxxxxxxxxxx>
• Re: RAID-1, identical disks recognised differently
  • From: Ross Vandegrift <ross@xxxxxxxxxxxxxxxx>
• Re: RAID-1, identical disks recognised differently
  • From: Danilo Godec <danci@xxxxxxxxx>
• RAID-1, identical disks recognised differently
  • From: Mikael Johansson <mpjohans@xxxxxxxxxxxxxxx>
• RE: badblocks & raid
  • From: Alvin Oga <aoga@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• HP Netserver LD Pro
  • From: Shane Hickey <shane@xxxxxxxxxxxxxxxxxxx>
• RE: badblocks & raid
  • From: "Cajoline" <cajoline@xxxxxxxxxxxxxx>
• badblocks & raid
  • From: Michael Robinton <michael@xxxxxxxxxxxxxx>
• badblocks & raid
  • From: "Cajoline" <cajoline@xxxxxxxxxxxxxx>
• RE: raidreconf
  • From: "Cajoline" <cajoline@xxxxxxxxxxxxxx>
• Re: raidreconf
  • From: Jakob Østergaard <jakob@xxxxxxxxxxxxx>
• RE: raidreconf
  • From: "Cajoline" <cajoline@xxxxxxxxxxxxxx>
• Re: raidreconf
  • From: Jakob Østergaard <jakob@xxxxxxxxxxxxx>
• Re: [RAID] Scripts watch SW RAID1 for HD failure - mdctl
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• RE: raidreconf
  • From: "Cajoline" <cajoline@xxxxxxxxxxxxxx>
• Re: raidreconf
  • From: Jakob Østergaard <jakob@xxxxxxxxxxxxx>
• RE: raidreconf
  • From: "Cajoline" <cajoline@xxxxxxxxxxxxxx>
• Re: raidreconf
  • From: Jakob Østergaard <jakob@xxxxxxxxxxxxx>
• RE: raidreconf
  • From: Fredrik Lindgren <fli@xxxxxxxxx>
• Re: raidreconf
  • From: Jakob Østergaard <jakob@xxxxxxxxxxxxx>
• RE: raidreconf
  • From: "Cajoline" <cajoline@xxxxxxxxxxxxxx>
• Re: raidhotadd problems.
  • From: Anders Peter Fugmann <afu@xxxxxxxxxxxxxxx>
• Re: raidreconf
  • From: Jakob Østergaard <jakob@xxxxxxxxxxxxx>
• Re: raidreconf
  • From: Jakob Østergaard <jakob@xxxxxxxxxxxxx>
• Re: cannot start raid after re-install
  • From: wodecki@xxxxxx
• RE: raidreconf
  • From: "Martin Bene" <martin.bene@xxxxxxxxxxxxx>
• Re: invalidate: busy buffer
  • From: Ross Vandegrift <ross@xxxxxxxxxxxxxxxx>
• Re: invalidate: busy buffer
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• RE: raidreconf
  • From: "Cajoline" <cajoline@xxxxxxxxxxxxxx>
• Re: raidreconf
  • From: Jakob Østergaard <jakob@xxxxxxxxxxxxx>
• Re: 160gb(Ata133) on promise ultra33 or ultra66
  • From: David Chambers <davidc@xxxxxxxxxxxxxx>
• Re: 160gb(Ata133) on promise ultra33 or ultra66
  • From: Danilo Godec <danci@xxxxxxxxx>
• Re: 160gb(Ata133) on promise ultra33 or ultra66
  • From: raid@xxxxxxxxxxxx
• raidreconf
  • From: "Cajoline" <cajoline@xxxxxxxxxxxxxx>
• Re: raidhotadd problems.
  • From: Danilo Godec <danci@xxxxxxxxx>
• Re: raidhotadd problems.
  • From: Jakob Østergaard <jakob@xxxxxxxxxxxxx>
• raidhotadd problems.
  • From: Anders Peter Fugmann <afu@xxxxxxxxxxxxxxx>
• Re: 3ware 7850 and ata133 / 160Gb ?? (and on older controllers?)
  • From: ritz@xxxxxxxxxx (Chris Mauritz)
• Re: 3ware 7850 and ata133 / 160Gb ?? (and on older controllers?)
  • From: raid@xxxxxxxxxxxx
• Re: 160gb(Ata133) on promise ultra33 or ultra66
  • From: Danilo Godec <danci@xxxxxxxxx>
• Re: RAID1 & lilo
  • From: Steven Dake <sdake@xxxxxxxxxx>
• Re: cannot start raid after re-install
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• cannot start raid after re-install
  • From: wodecki@xxxxxx
• RE: RAID1 & lilo
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• RE: RAID1 & lilo
  • From: "Cress, Andrew R" <andrew.r.cress@xxxxxxxxx>
• Re: Hardware RAID controllers
  • From: Ross Vandegrift <ross@xxxxxxxxxxxxxxxx>
• Re: Hardware RAID controllers
  • From: Micah Anderson <micah@xxxxxxxxxx>
• 160gb(Ata133) on promise ultra33 or ultra66
  • From: raid@xxxxxxxxxxxx
• Re: [RAID] Scripts watch SW RAID1 for HD failure - mdctl - rest of um
  • From: Alvin Oga <aoga@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [RAID] Scripts watch SW RAID1 for HD failure - mdctl
  • From: Robin Whittle <rw@xxxxxxxxxxxxxx>
• Re: Scripts watch SW RAID1 for HD failure
  • From: Junaid Rizvi <domdev@xxxxxxxxxx>
• Re: 3* Promise Ultra66 not working ?
  • From: raid@xxxxxxxxxxxx
• Re: 3ware 7850 and ata133 / 160Gb ?? (and on older controllers?)
  • From: raid@xxxxxxxxxxxx
• Re: 3ware 7850 and ata133 / 160Gb ?? (and on older controllers?)
  • From: Gregory Leblanc <gleblanc@xxxxxxxxxxxxxxx>
• Re: linear raid not working...
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Re: 3ware 7850 and ata133 / 160Gb ?? (and on older controllers?)
  • From: ritz@xxxxxxxxxx (Chris Mauritz)
• linear raid not working...
  • From: Jeff Meininger <jeffm@xxxxxxxxxxxxxxx>
• Random hangs with IBM xSeries 330
  • From: Janne Pikkarainen <jaba@xxxxxxxxxxxxx>
• Re: RAID1-Problem?
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• 3* Promise Ultra66 not working ?
  • From: raid@xxxxxxxxxxxx
• Scripts watch SW RAID1 for HD failure
  • From: Robin Whittle <rw@xxxxxxxxxxxxxx>
• Re: Raid 1, Raid 0 Question
  • From: Jakob Østergaard <jakob@xxxxxxxxxxxxx>
• mkraid: 10 Hors??? possible?
  • From: Sandro Dentella <sandro.dentella@xxxxxx>
• Re: Raid 1, Raid 0 Question
  • From: Gregory Leblanc <gleblanc@xxxxxxxxxxxxxxx>
• Raid 1, Raid 0 Question
  • From: "Glenn MacGregor" <gtm@xxxxxxxxxx>
• invalidate: busy buffer
  • From: Ross Vandegrift <ross@xxxxxxxxxxxxxxxx>
• Re: 2.4.17, SW raid5 & swap & root -> NOT SAFE
  • From: Danilo Godec <danci@xxxxxxxxx>
• Re: 2.4.17, SW raid5 & swap & root -> NOT SAFE
  • From: Danilo Godec <danci@xxxxxxxxx>
• Re: 2.4.17, SW raid5 & swap & root -> NOT SAFE
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Re: 2.4.17, SW raid5 & swap & root -> NOT SAFE
  • From: Alvin Oga <aoga@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• 2.4.17, SW raid5 & swap & root -> NOT SAFE
  • From: Danilo Godec <danci@xxxxxxxxx>
• Another Promise question
  • From: Danilo Godec <danci@xxxxxxxxx>
• Promise Ultra100TX2 - new BIOS
  • From: Danilo Godec <danci@xxxxxxxxx>
• Re: Could not compile md/raid5.c and md/multipath.c in 2.5.3-pre3
  • From: Evgeniy Polyakov <johnpol@xxxxxxxxxxx>
• Re: Could not compile md/raid5.c and md/multipath.c in 2.5.3-pre3
  • From: Mingming cao <cmm@xxxxxxxxxx>