Hi,
I am trying to setup a bootable raid1 system.
When I run lilo I get the following error:
Fatal: map file must be on the boot RAID partition
The map file is in /boot which is on /dev/md0 the partition I want to boot
from.
I am also using ext3.
The weird thing is that all my raid devices say that there is a total of 3
disks when there is only one:
candela:/home/iain# mdadm -D /dev/md0
/dev/md0:
Version : 00.90.00
Creation Time : Wed Apr 24 18:49:32 2002
Raid Level : raid1
Array Size : 192640 (188.12 MiB 197.26 MB)
Device Size : 192640 (188.12 MiB 197.26 MB)
Raid Disks : 2
Total Disks : 3
Preferred Minor : 0
Persistance : Superblock is persistant
Update Time : Thu Apr 25 01:47:37 2002
State : dirty, no-errors
Active Drives : 2
Working Drives : 2
Failed Drives : 1
Spare Drives : 0
Number Major Minor RaidDisk State
0 3 1 0 active sync /dev/hda1
1 22 1 1 active sync /dev/hdc1
UUID : 25bd58dd:78b56568:74efe0f8:57a0e70a
I would appreciate any help as this is quite urgent.
Iain.
--
public key available at http://www.minihub.org/~iain/iain.asc
-
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
