Linux RAID Storage Date Index
[Prev Page][Next Page]
- RH7.2, RAID1, how to recover?
- From: "Frank Isaacs" <frank@xxxxxxxxxxxxxxxxxxxxx>
- Additional options for mdctl-0.5
- From: "Stephenson, Dale" <dstephenson@xxxxxxxxxxxxxx>
- grub
- From: Kai Wilke <kiste@xxxxxxxxxxxx>
- ANNOUCE: mdctl 0.6 available
- From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
- Re: ext3 on Linux software RAID1
- From: Andrew Morton <akpm@xxxxxxxxxx>
- Re: ext3 on Linux software RAID1
- From: "Stephen C. Tweedie" <sct@xxxxxxxxxx>
- Question about monitoring Multipath status
- From: Li Zhou <lzhou@xxxxxxxxxx>
- Re: raid 0 acting up.
- From: Marcel B <marcelb@xxxxxxxxxx>
- Linux-2.4.19-pre2-ac2 Oops
- From: "Mike Black" <mblack@xxxxxx>
- Oopses in 2.4.16
- From: "Mike Black" <mblack@xxxxxxxxx>
- raid 0 acting up.
- From: "Dan Adelman" <dan@xxxxxxxx>
- Faulty marks.
- From: Frank Samuelson <sam@xxxxxxxxxxxxxxxx>
- possible buffer overruns in /proc/mdstat and raid in 2.4.16 kernel
- From: George Goble <ghg@xxxxxxxxxxxxxx>
- Re: Raid5 race patch (fwd)
- From: Matjaz Godec <gody@xxxxxxxxxxxxxxx>
- Re: Raid5 race patch (fwd)
- From: Matjaz Godec <gody@xxxxxxxxxxxxxxx>
- Re: ext3 on Linux software RAID1
- From: Andrew Morton <akpm@xxxxxxxxxx>
- confusing mkraid problems
- From: l-berland@xxxxxxxxxxxxxxxx
- Re: ext3 on Linux software RAID1
- From: Matti Aarnio <matti.aarnio@xxxxxxxxxxx>
- Re: Raid5 race patch (fwd)
- From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
- Re: Raid5 race patch (fwd)
- From: Matjaz Godec <gody@xxxxxxxxxxxxxxx>
- Re: ext3 on Linux software RAID1
- From: Gregory Leblanc <gleblanc@xxxxxxxxxxxxxxx>
- ext3 on Linux software RAID1
- From: "Rechenberg, Andrew" <ARechenberg@xxxxxxxxxxxxxxxxxxxxxxxxx>
- Re: RAID1+LVM
- From: Luca Berra <bluca@xxxxxxxxxx>
- Re: Howto use or readings for mdctl.conf
- From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
- Re: [PATCH] md.c semaphore updates
- From: Ross Vandegrift <ross@xxxxxxxxxxxxxxxx>
- RE: Lilo problem with RAID1
- From: "Cress, Andrew R" <andrew.r.cress@xxxxxxxxx>
- Re: Raid5 race patch (fwd)
- From: Matjaz Godec <gody@xxxxxxxxxxxxxxx>
- Re: [PATCH] md.c semaphore updates
- From: Ross Vandegrift <ross@xxxxxxxxxxxxxxxx>
- Re: RAID1+LVM
- From: Pieter Hollants <pieter@xxxxxxxxxxxx>
- Re: [PATCH] md.c semaphore updates
- From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
- Re: Raid5 race patch (fwd)
- From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
- Re: RAID1+LVM
- From: Luca Berra <bluca@xxxxxxxxxx>
- Re: Raid5 race patch (fwd)
- From: Matjaz Godec <gody@xxxxxxxxxxxxxxx>
- HPT 370 raid problems
- From: shura <shura@xxxxxxx>
- RAID1+LVM
- From: mikael.sjogren@xxxxxxxx
- [PATCH] md.c semaphore updates
- From: Ross Vandegrift <ross@xxxxxxxxxxxxxxxx>
- Reproductable kernel bug at raid1.c:656
- From: Jani Averbach <jaa@xxxxxxxxx>
- Re: setting "debug level"
- From: Micah Anderson <micah@xxxxxxxxxx>
- anybody know of an sd.c driver or equiv with no partitions?
- From: George Goble <ghg@xxxxxxxxxxxxxx>
- setting "debug level"
- From: Marcel <marcelb@xxxxxxxxxx>
- Re: Raid5 race patch (fwd)
- From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
- Re: Raid5 race patch (fwd)
- From: Ross Vandegrift <ross@xxxxxxxxxxxxxxxx>
- Re: Raid5 race patch (fwd)
- From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
- Re: How Do You Move Partitions from one raid-1device to another?
- From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
- How Do You Move Partitions from one raid-1device to another?
- From: Jeff Hill <jhill@xxxxxxxxxxxx>
- Lilo problem with RAID1
- From: Mark Nellemann <mark@xxxxxxxxxxx>
- Re: help needed with mdctl
- From: Carlos Carvalho <carlos@xxxxxxxxxxxxxx>
- Re: help needed with mdctl
- From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
- Re: help needed with mdctl
- From: Carlos Carvalho <carlos@xxxxxxxxxxxxxx>
- Re: Raid5 race patch (fwd)
- From: Matjaz Godec <gody@xxxxxxxxxxxxxxx>
- Re: mdctl - a lifesaver
- From: Alvin Oga <aoga@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
- Re: mdctl - a lifesaver
- From: Jakob Østergaard <jakob@xxxxxxxxxxxxx>
- mdctl - a lifesaver
- From: George Goble <ghg@xxxxxxxxxxxxxx>
- Re: dumb questions
- From: Jakob Østergaard <jakob@xxxxxxxxxxxxx>
- Re: dumb questions
- From: "sjb" <ottaky@xxxxxxxxxx>
- RE: dumb questions
- From: "Werner, Markus" <Markus.Werner@xxxxxxxxxxxxxxx>
- dumb questions
- From: "sjb" <ottaky@xxxxxxxxxx>
- Re: help needed with mdctl
- From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
- Re: [RAID] Scripts watch SW RAID1 for HD failure - mdctl
- From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
- Re: Raid5 race patch (fwd)
- From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
- Re: raid5: multiple 0 requests for sector ...
- From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
- Re: raid5: multiple 0 requests for sector ...
- From: Matti Aarnio <matti.aarnio@xxxxxxxxxxx>
- Re: raid5: multiple 0 requests for sector ...
- From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
- Re: raid5: multiple 0 requests for sector ...
- From: Andy Smith <asmith@xxxxxxxxxxxxxx>
- Re: raid5: multiple 0 requests for sector ...
- From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
- Re: raid5: multiple 0 requests for sector ...
- From: Andy Smith <asmith@xxxxxxxxxxxxxx>
- raid5: multiple 0 requests for sector ...
- From: Andy Smith <asmith@xxxxxxxxxxxxxx>
- AW: perfomance on IDE-Raid
- From: "Martin Bene" <martin.bene@xxxxxxxxxxxxx>
- Re: 3ware cards and drive failures (was Re: perfomance on IDE-Raid)
- From: Gregory Leblanc <gleblanc@xxxxxxxxxxxxxxx>
- RE: raidsetfaulty / mdctl --fail problem
- From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
- RE: raidsetfaulty / mdctl --fail problem
- From: Brinley Craig <brinley.craig@xxxxxxxxxxxxxxxx>
- Re: Raid problems.
- From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
- Re: bug in file md.c, line 2334 + RAID1 reconstruction after crash
- From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
- Re: raidsetfaulty / mdctl --fail problem
- From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
- Re: creating raid with existing data?
- From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
- Re: perfomance on IDE-Raid
- From: Kristian Hoffmann <khoff@xxxxxxxxxxxxxx>
- Re: mdctl & adding a new drive to a RAID-1 array
- From: Jakob Østergaard <jakob@xxxxxxxxxxxxx>
- Re: mdctl & adding a new drive to a RAID-1 array
- From: "Jordan Russell" <jr-list-linuxraid@xxxxxx>
- Re: mdctl & adding a new drive to a RAID-1 array
- From: Chris Hirsch <chris@xxxxxxxxxxxxxxxxxxx>
- Re: mdctl & adding a new drive to a RAID-1 array
- From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
- Re: mdctl & adding a new drive to a RAID-1 array
- From: "Jordan Russell" <jr-list-linuxraid@xxxxxx>
- Re: raid 5 problems-- won't start
- From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
- Re: mdctl & adding a new drive to a RAID-1 array
- From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
- mdctl & adding a new drive to a RAID-1 array
- From: "Jordan Russell" <jr-list-linuxraid@xxxxxx>
- Re: perfomance on IDE-Raid
- From: Gregory Leblanc <gleblanc@xxxxxxxxxxxxxxx>
- [BUG] multipath configuration
- From: Stephen Cameron <steve.cameron@xxxxxxxxxx>
- raid 5 problems-- won't start
- From: Frank Samuelson <sam@xxxxxxxxxxxxxxxx>
- bug in file md.c, line 2334 + RAID1 reconstruction after crash
- From: Mark Burton <markb@xxxxxxxxxx>
- Re: mdctl config (was Re: Using mdctl for replacing failed disk)
- From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
- Re: Pre 2.4 heads up ;)
- From: Jakob Østergaard <jakob@xxxxxxxxxxxxx>
- Re: Pre 2.4 heads up ;)
- From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
- RAID and grub?
- From: Micah Anderson <micah@xxxxxxxxxx>
- [micah@xxxxxxxxxx: creating raid with existing data?]
- From: Micah Anderson <micah@xxxxxxxxxx>
- Re: Pre 2.4 heads up ;)
- From: Jakob Østergaard <jakob@xxxxxxxxxxxxx>
- Re: Pre 2.4 heads up ;)
- From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
- Pre 2.4 heads up ;)
- From: Jakob Østergaard <jakob@xxxxxxxxxxxxx>
- Re: RAID-1 over network?
- From: Jakob Østergaard <jakob@xxxxxxxxxxxxx>
- Re: perfomance on IDE-Raid
- From: Nils Rennebarth <nils@xxxxxxxxxxxxxxxxxxxx>
- RE: two questions + a 1tb ide array
- From: Fredrik Lindgren <fli@xxxxxxxxx>
- AW: RAID-1 over network?
- From: "Martin Bene" <martin.bene@xxxxxxxxxxxxx>
- Re: RAID-1 over network?
- From: Ross Vandegrift <ross@xxxxxxxxxxxxxxxx>
- creating raid with existing data?
- From: Micah Anderson <micah@xxxxxxxxxx>
- raidsetfaulty / mdctl --fail problem
- From: Brinley Craig <brinley.craig@xxxxxxxxxxxxxxxx>
- Re: perfomance on IDE-Raid
- From: "Mr. James W. Laferriere" <babydr@xxxxxxxxxxxxxxxx>
- Re: two questions + a 1tb ide array
- From: Justin <jb@xxxxxxxxxxxxxx>
- Re: two questions + a 1tb ide array
- From: Jakob Østergaard <jakob@xxxxxxxxxxxxx>
- Re: two questions + a 1tb ide array
- From: Max TenEyck Woodbury <mtew@xxxxxxxxxxxx>
- Re: RAID-1 over network?
- From: "Jordan Russell" <jr-list-linuxraid@xxxxxx>
- Re: perfomance on IDE-Raid
- From: Trent Piepho <xyzzy@xxxxxxxxxxxxx>
- Re: RAID-1 over network?
- From: Dave Jones <davej@xxxxxxx>
- Re: RAID-1 over network?
- From: Alistair Riddell <ali@xxxxxxxxxx>
- Re: RAID-1 over network?
- From: Ross Vandegrift <ross@xxxxxxxxxxxxxxxx>
- Re: perfomance on IDE-Raid
- From: David Rees <dbr@xxxxxxxxxxxxxxxx>
- Re: perfomance on IDE-Raid
- From: Jakob Østergaard <jakob@xxxxxxxxxxxxx>
- RAID-1 over network?
- From: "Jordan Russell" <jr-list-linuxraid@xxxxxx>
- Re: perfomance on IDE-Raid
- From: Trent Piepho <xyzzy@xxxxxxxxxxxxx>
- Re: perfomance on IDE-Raid
- From: David Rees <dbr@xxxxxxxxxxxxxxxx>
- Re: perfomance on IDE-Raid
- From: ritz@xxxxxxxxxx (Chris Mauritz)
- Re: Q: Booting /dev/sda (3ware 7850) fails? Ideas?
- From: Mads Peter Bach <mpb@xxxxxxxxxxxxxxxxxxxx>
- Re: two questions + a 1tb ide array
- From: Jakob Østergaard <jakob@xxxxxxxxxxxxx>
- AW: perfomance on IDE-Raid
- From: "Martin Bene" <martin.bene@xxxxxxxxxxxxx>
- Re: perfomance on IDE-Raid
- From: Gregory Leblanc <gleblanc@xxxxxxxxxxxxxxx>
- Re: Q: Booting /dev/sda (3ware 7850) fails? Ideas?
- From: ritz@xxxxxxxxxx (Chris Mauritz)
- Re: two questions + a 1tb ide array
- From: Justin <jb@xxxxxxxxxxxxxx>
- Re: Raid-5, LVM, Reiser FS
- From: Chris Hirsch <chris@xxxxxxxxxxxxxxxxxxx>
- Re: perfomance on IDE-Raid
- From: ritz@xxxxxxxxxx (Chris Mauritz)
- Q: Booting /dev/sda (3ware 7850) fails? Ideas?
- From: Brian <brian@xxxxxxxxxxxxxxxxxxxx>
- Re: two questions + a 1tb ide array
- From: Jakob Østergaard <jakob@xxxxxxxxxxxxx>
- Re: perfomance on IDE-Raid
- From: Jakob Østergaard <jakob@xxxxxxxxxxxxx>
- Re: two questions + a 1tb ide array
- From: Jakob Østergaard <jakob@xxxxxxxxxxxxx>
- Re: perfomance on IDE-Raid
- From: ritz@xxxxxxxxxx (Chris Mauritz)
- perfomance on IDE-Raid
- From: kb@xxxxxxxxxxxxxxxxx
- Re: Raid problems.
- From: Gregory Leblanc <gleblanc@xxxxxxxxxxxxxxx>
- Raid problems.
- From: "Brandon Amundson" <bamundson@xxxxxxx>
- Re: two questions + a 1tb ide array
- From: Justin <jb@xxxxxxxxxxxxxx>
- Re: two questions + a 1tb ide array
- From: Alvin Oga <aoga@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
- two questions + a 1tb ide array
- From: Justin <jb@xxxxxxxxxxxxxx>
- 2.5 TODO, was: Re: 2.5.5-pre1 raid5 compile fails
- From: Dave Jones <davej@xxxxxxx>
- 2.5.5-pre1 raid5 compile fails
- From: Brak <brak@xxxxxxxxx>
- Re: Moving raid array to a different IDE controller
- From: Mike Tran <mhtran@xxxxxxxxxx>
- Raid5 race patch (fwd)
- From: Danilo Godec <danci@xxxxxxxxx>
- RE: RAID1 array not actively mirroring
- From: "Rechenberg, Andrew" <arechenberg@xxxxxxxxxxxx>
- RAID1 array not actively mirroring
- From: "Rechenberg, Andrew" <arechenberg@xxxxxxxxxxxx>
- RE: Raid-5, LVM, Reiser FS
- From: "Stephenson, Dale" <dstephenson@xxxxxxxxxxxxxx>
- Re: Raid-5, LVM, Reiser FS
- From: Edward Shushkin <edward@xxxxxxxxxxx>
- Re: mdctl config (was Re: Using mdctl for replacing failed disk)
- From: "Mr. James W. Laferriere" <babydr@xxxxxxxxxxxxxxxx>
- Re: Raid-5, LVM, Reiser FS
- From: Ross Vandegrift <ross@xxxxxxxxxxxxxxxx>
- RE: Raid-5, LVM, Reiser FS
- From: "Cajoline" <cajoline@xxxxxxxxxxxxxx>
- Re: Raid-5, LVM, Reiser FS
- From: Jakob Østergaard <jakob@xxxxxxxxxxxxx>
- Re: Raid-5, LVM, Reiser FS
- From: Matteo Centonza <matteo@xxxxxx>
- Re: mdctl issues
- From: "Tim Kent" <Tim.Kent@xxxxxxxxxxxxxxxxxxxxx>
- Re: Raid-5, LVM, Reiser FS
- From: Alvin Oga <aoga@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
- Re: Raid-5, LVM, Reiser FS
- From: Gregory Leblanc <gleblanc@xxxxxxxxxxxxxxx>
- Re: mdctl config (was Re: Using mdctl for replacing failed disk)
- From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
- Re: Using mdctl for replacing failed disk
- From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
- Raid-5, LVM, Reiser FS
- From: Chris Hirsch <chris@xxxxxxxxxxxxxxxxxxx>
- mdctl config (was Re: Using mdctl for replacing failed disk)
- From: "Mr. James W. Laferriere" <babydr@xxxxxxxxxxxxxxxx>
- Using mdctl for replacing failed disk
- From: Ian Thurlbeck <ian@xxxxxxxxxxxxxxxxxx>
- Moving raid array to a different IDE controller
- From: Paul Flinders <P.Flinders@xxxxxxxxxx>
- Re: Problem with RAID-1, 2 IDE disks, Linux Red Hat 7.0
- From: Danilo Godec <danci@xxxxxxxxx>
- Problem with RAID-1, 2 IDE disks, Linux Red Hat 7.0
- From: "Daniel Paul" <dpaul@xxxxxxx>
- Re: RAID-1, identical disks recognised differently
- From: Alvin Oga <aoga@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
- Re: RAID-1, identical disks recognised differently
- Re: HP Netserver LD Pro
- From: Shane Hickey <shane@xxxxxxxxxxxxxxxxxxx>
- Re: RAID-1, identical disks recognised differently
- From: Kanoa Withington <kanoa@xxxxxxxxxxxxxxx>
- Re: [RAID] Scripts watch SW RAID1 for HD failure - mdctl
- From: Junaid Rizvi <domdev@xxxxxxxxxx>
- Re: RAID-1, identical disks recognised differently
- From: Danilo Godec <danci@xxxxxxxxx>
- Re: RAID-1, identical disks recognised differently
- From: Mikael Johansson <mpjohans@xxxxxxxxxxxxxxx>
- Re: RAID-1, identical disks recognised differently
- From: Kanoa Withington <kanoa@xxxxxxxxxxxxxxx>
- Re: RAID-1, identical disks recognised differently
- From: Alvin Oga <aoga@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
- RE: RAID-1, identical disks recognised differently
- From: "Martin Bene" <martin.bene@xxxxxxxxxxxxx>
- Re: RAID-1, identical disks recognised differently
- From: Ross Vandegrift <ross@xxxxxxxxxxxxxxxx>
- Re: RAID-1, identical disks recognised differently
- From: Danilo Godec <danci@xxxxxxxxx>
- RAID-1, identical disks recognised differently
- From: Mikael Johansson <mpjohans@xxxxxxxxxxxxxxx>
- RE: badblocks & raid
- From: Alvin Oga <aoga@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
- HP Netserver LD Pro
- From: Shane Hickey <shane@xxxxxxxxxxxxxxxxxxx>
- RE: badblocks & raid
- From: "Cajoline" <cajoline@xxxxxxxxxxxxxx>
- badblocks & raid
- From: Michael Robinton <michael@xxxxxxxxxxxxxx>
- badblocks & raid
- From: "Cajoline" <cajoline@xxxxxxxxxxxxxx>
- RE: raidreconf
- From: "Cajoline" <cajoline@xxxxxxxxxxxxxx>
- Re: raidreconf
- From: Jakob Østergaard <jakob@xxxxxxxxxxxxx>
- RE: raidreconf
- From: "Cajoline" <cajoline@xxxxxxxxxxxxxx>
- Re: raidreconf
- From: Jakob Østergaard <jakob@xxxxxxxxxxxxx>
- Re: [RAID] Scripts watch SW RAID1 for HD failure - mdctl
- From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
- RE: raidreconf
- From: "Cajoline" <cajoline@xxxxxxxxxxxxxx>
- Re: raidreconf
- From: Jakob Østergaard <jakob@xxxxxxxxxxxxx>
- RE: raidreconf
- From: "Cajoline" <cajoline@xxxxxxxxxxxxxx>
- Re: raidreconf
- From: Jakob Østergaard <jakob@xxxxxxxxxxxxx>
- RE: raidreconf
- From: Fredrik Lindgren <fli@xxxxxxxxx>
- Re: raidreconf
- From: Jakob Østergaard <jakob@xxxxxxxxxxxxx>
- RE: raidreconf
- From: "Cajoline" <cajoline@xxxxxxxxxxxxxx>
- Re: raidhotadd problems.
- From: Anders Peter Fugmann <afu@xxxxxxxxxxxxxxx>
- Re: raidreconf
- From: Jakob Østergaard <jakob@xxxxxxxxxxxxx>
- Re: raidreconf
- From: Jakob Østergaard <jakob@xxxxxxxxxxxxx>
- Re: cannot start raid after re-install
- RE: raidreconf
- From: "Martin Bene" <martin.bene@xxxxxxxxxxxxx>
- Re: invalidate: busy buffer
- From: Ross Vandegrift <ross@xxxxxxxxxxxxxxxx>
- Re: invalidate: busy buffer
- From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
- RE: raidreconf
- From: "Cajoline" <cajoline@xxxxxxxxxxxxxx>
- Re: raidreconf
- From: Jakob Østergaard <jakob@xxxxxxxxxxxxx>
- Re: 160gb(Ata133) on promise ultra33 or ultra66
- From: David Chambers <davidc@xxxxxxxxxxxxxx>
- Re: 160gb(Ata133) on promise ultra33 or ultra66
- From: Danilo Godec <danci@xxxxxxxxx>
- Re: 160gb(Ata133) on promise ultra33 or ultra66
- raidreconf
- From: "Cajoline" <cajoline@xxxxxxxxxxxxxx>
- Re: raidhotadd problems.
- From: Danilo Godec <danci@xxxxxxxxx>
- Re: raidhotadd problems.
- From: Jakob Østergaard <jakob@xxxxxxxxxxxxx>
- raidhotadd problems.
- From: Anders Peter Fugmann <afu@xxxxxxxxxxxxxxx>
- Re: 3ware 7850 and ata133 / 160Gb ?? (and on older controllers?)
- From: ritz@xxxxxxxxxx (Chris Mauritz)
- Re: 3ware 7850 and ata133 / 160Gb ?? (and on older controllers?)
- Re: 160gb(Ata133) on promise ultra33 or ultra66
- From: Danilo Godec <danci@xxxxxxxxx>
- Re: RAID1 & lilo
- From: Steven Dake <sdake@xxxxxxxxxx>
- Re: cannot start raid after re-install
- From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
- cannot start raid after re-install
- RE: RAID1 & lilo
- From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
- RE: RAID1 & lilo
- From: "Cress, Andrew R" <andrew.r.cress@xxxxxxxxx>
- Re: Hardware RAID controllers
- From: Ross Vandegrift <ross@xxxxxxxxxxxxxxxx>
- Re: Hardware RAID controllers
- From: Micah Anderson <micah@xxxxxxxxxx>
- 160gb(Ata133) on promise ultra33 or ultra66
- Re: [RAID] Scripts watch SW RAID1 for HD failure - mdctl - rest of um
- From: Alvin Oga <aoga@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
- Re: [RAID] Scripts watch SW RAID1 for HD failure - mdctl
- From: Robin Whittle <rw@xxxxxxxxxxxxxx>
- Re: Scripts watch SW RAID1 for HD failure
- From: Junaid Rizvi <domdev@xxxxxxxxxx>
- Re: 3* Promise Ultra66 not working ?
- Re: 3ware 7850 and ata133 / 160Gb ?? (and on older controllers?)
- Re: 3ware 7850 and ata133 / 160Gb ?? (and on older controllers?)
- From: Gregory Leblanc <gleblanc@xxxxxxxxxxxxxxx>
- Re: linear raid not working...
- From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
- Re: 3ware 7850 and ata133 / 160Gb ?? (and on older controllers?)
- From: ritz@xxxxxxxxxx (Chris Mauritz)
- linear raid not working...
- From: Jeff Meininger <jeffm@xxxxxxxxxxxxxxx>
- Random hangs with IBM xSeries 330
- From: Janne Pikkarainen <jaba@xxxxxxxxxxxxx>
- Re: RAID1-Problem?
- From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
- 3* Promise Ultra66 not working ?
- Scripts watch SW RAID1 for HD failure
- From: Robin Whittle <rw@xxxxxxxxxxxxxx>
- Re: Raid 1, Raid 0 Question
- From: Jakob Østergaard <jakob@xxxxxxxxxxxxx>
- mkraid: 10 Hors??? possible?
- From: Sandro Dentella <sandro.dentella@xxxxxx>
- Re: Raid 1, Raid 0 Question
- From: Gregory Leblanc <gleblanc@xxxxxxxxxxxxxxx>
- Raid 1, Raid 0 Question
- From: "Glenn MacGregor" <gtm@xxxxxxxxxx>
- invalidate: busy buffer
- From: Ross Vandegrift <ross@xxxxxxxxxxxxxxxx>
- Re: 2.4.17, SW raid5 & swap & root -> NOT SAFE
- From: Danilo Godec <danci@xxxxxxxxx>
- Re: 2.4.17, SW raid5 & swap & root -> NOT SAFE
- From: Danilo Godec <danci@xxxxxxxxx>
- Re: 2.4.17, SW raid5 & swap & root -> NOT SAFE
- From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
- Re: 2.4.17, SW raid5 & swap & root -> NOT SAFE
- From: Alvin Oga <aoga@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
- 2.4.17, SW raid5 & swap & root -> NOT SAFE
- From: Danilo Godec <danci@xxxxxxxxx>
- Another Promise question
- From: Danilo Godec <danci@xxxxxxxxx>
- Promise Ultra100TX2 - new BIOS
- From: Danilo Godec <danci@xxxxxxxxx>
- Re: Could not compile md/raid5.c and md/multipath.c in 2.5.3-pre3
- From: Evgeniy Polyakov <johnpol@xxxxxxxxxxx>
- Re: Could not compile md/raid5.c and md/multipath.c in 2.5.3-pre3
- From: Mingming cao <cmm@xxxxxxxxxx>
[Index of Archives]
[Linux RAID Wiki]
[ATA RAID]
[Linux SCSI Target Infrastructure]
[Linux Block]
[Linux IDE]
[Linux SCSI]
[Linux Hams]
[Device Mapper]
[Kernel]
[Linux Admin]
[Linux Net]
[GFS]
[RPM]
[git]
[Yosemite Forum]
[Linux Networking]
