Re: 3ware 7850 and ata133 / 160Gb ?? (and on older controllers?)

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sun, 3 Feb 2002, Chris Mauritz wrote:

> > I'm thinking to buy a 3ware controller
> > i'm going to use software raid, so i'm not interessted in the hardware
> > raid stuff.
> > can i use 160gb disks on this controller ?
>
> The 7450 and 7850 can support the 160gig disks with a firmware upgrade.
> The upgrade is probably available for download on their site now, but
> you can always request it from their support people if it isn't.  The
> last time I checked, they were planning to release it to the public
> back in November or December.

got an answer from 3ware :

------------------------------------------------------------------------
Yes and no.

Current firmware will format 138GB only (32 bit)
New firmware ver 7.4 will format full 160 GB. (it will be on the web on
end of Feb)
------------------------------------------------------------------------

>
> Also, the 7450/7850 are VERY fast.  Personally, I think you would
> be foolish to load the cpu with the chore when the card is probably
> at LEAST as fast.
but then i need to format my whole array
and i don't have any temp space to backup all data

and i don't see any reason for upgrading
fileserver cpu's are doing nothing (2 cpu's)

-
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux RAID Wiki]     [ATA RAID]     [Linux SCSI Target Infrastructure]     [Linux Block]     [Linux IDE]     [Linux SCSI]     [Linux Hams]     [Device Mapper]     [Device Mapper Cryptographics]     [Kernel]     [Linux Admin]     [Linux Net]     [GFS]     [RPM]     [git]     [Yosemite Forum]


  Powered by Linux