Hi folks, I'm having a hard time with my sw RAID5 system. I built a RAID5 out of 4 disks which are 120 GB Maxtor drives. Since I had one Ultra100 and need to buy a second I tool myself to the next store.... Hmmm they only had Ultra 100 TX2 ... OK.. I took one of those and set it up. I had to fiddle with some patches and at least I get the controllers and drives to work properly. Now the bad scene started... my mainboard got broken.... so I changed the board. After that change nothing is working fine anymore.... Two of my four drives do not show any partition table anymore .... the drives show different C/H/S Numbers when using fdisk and so on... Well since I don't want to loose my data I need the system to get up and running again. Has anyone of you any good idea what to do about it? Is the different C/H/S number related to lost partition table ? How can get the drives get recognized correctly by the adapter? Is there anything else I can try? So far .. thanks in advance ... Steve - To unsubscribe from this list: send the line "unsubscribe linux-raid" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
