On Wed, 24 Apr 2002 07:52, Jakob Østergaard wrote:
> > The map file is in /boot which is on /dev/md0 the partition I want to
> > boot from.
>
> Can you send /proc/mdstat and /etc/lilo.conf ?
Ok the problem seems to have changed now. After reinstalling lilo and the
kernel I was able to use lilo. However, only the first hard drive will
boot. If I disable the first hard drive and try and boot off the second I get
L 40
When I reinstalled LILO it installed a MBR on /dev/hda so now when lilo boots
it shows
MBR
LILO 22.2
I'm not sure if this is right.
Here is my lilo.conf
lba32
boot=/dev/md0
root=/dev/md0
install=/boot/boot.b
delay=20
map=/boot/map
vga=normal
image=/vmlinuz
label=Linux
read-only
And cat /proc/mdstat
candela:~# cat /proc/mdstat
Personalities : [raid1]
read_ahead 1024 sectors
md0 : active raid1 hdc1[1] hda1[0]
192640 blocks [2/2] [UU]
md1 : active raid1 hdc6[1] hda6[0]
2931712 blocks [2/2] [UU]
md2 : active raid1 hdc7[1] hda7[0]
19534912 blocks [2/2] [UU]
md3 : active raid1 hdc8[1] hda8[0]
15430336 blocks [2/2] [UU]
unused devices: <none>
thanks, Iain.
--
public key available at http://www.minihub.org/~iain/iain.asc
-
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
