On Mon, 22 Jul 2002, Ross Vandegrift wrote: > On Mon, Jul 22, 2002 at 04:45:03PM -0700, Micah Anderson wrote: > > > I had lilo set for: > > > > > > boot=/dev/md0 > > > root=/dev/md5 > > > image=/boot/vmlinuz-2.2.20RAID > > > label=RAID > > > read-only > > > alias=4 > > Are you using the raid-extra-boot option? If you aren't you probably > want to be - it'll allow the system to boot if one of the boot drives is > dead. Actually, I switched to grub, I wasn't aware of the raid-extra-boot option, wonder if there is something similar in grub. > This may sound dumb, but are you sure you didn't compile RAID1 as a > module? If you did, you'll need to use an initrd to load the module > before you mount root. Otherwise, you'll need to rebuild the kernel > with the driver included in the kernel. Yes, I did *not* build them as modules. Modules are too much of a pain. :) Micah - To unsubscribe from this list: send the line "unsubscribe linux-raid" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
