Please, refer to the linux-raid mailing list for question about
raid software.
Be sure to include any relevant lines of syslog and the output
of cat /proc/mdstat
Regards,
Luca
On Sat, May 25, 2002 at 12:19:46PM +0530, Abacus wrote:
> Sir,
> We are having a problem with the installation of "Raid-1" on
> Rtlinux .
> We followed the following steps for our requirement :-
>
> 1) We installed Linux 6.2 OS on a Pentium -III PC with two Hard Disks.
> 2) Then we installed the rtlinux with the Raid-1 support enabled.
> 3) After the rtlinux compilation, we made the partitions for the Raid
> support and made the md0, md1 and md2 partitions.
> 4) Then we changed the partition types of partitions under md0, md1 to
> fd (Raid AutoDetect)
> 5) Then we used the command "mkraid /dev/md0" and got the following
> output along with the error message :-
>
> handling MD device /dev/md0
> analyzing super-block
> disk 0 : /dev/hda7 , 1887606 KB , raid superblock at 1887488 KB
> disk 1 : /dev/hdc7 , 1887606 KB , raid superblock at 1887488 KB
>
> mkraid : aborted , see syslog and /proc/mdstat for potential clues.
>
>
>
>
> We would be highly thankful to you, if you can try to help us out.
>
>
> Waiting for your response,
> Yours Faithfully ,
> Mandeep Singh Dang.
--
Luca Berra -- bluca@comedia.it
Communication Media & Services S.r.l.
/"\
\ / ASCII RIBBON CAMPAIGN
X AGAINST HTML MAIL
/ \
-
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
