With regards to your message at 04:54 PM 6/4/02, Friedrich Lobenstock. Where you stated: >Maurice Hilarius wrote: >>Hi There >>Problem: >>On IDE software RAID setup, we want to be able to hot-swap out a failed disk. >>Using 3Ware cards we can swap only by rebooting system to recognise the >>new drive >>Question: Is there a way to rescan IDE bus to recognise a new drive? > >Are you using the 3Ware Diskmanager Daemon and its webinterface or not? >It seems not. As I understand it that is only useful if we use the 3Ware BIOS RAID. In this case we are interested in doing this with software RAID So how would we make it rescan with this?? With our best regards, Maurice W. Hilarius Telephone: 01-780-456-9771 Hard Data Ltd. FAX: 01-780-456-9772 11060 - 166 Avenue mailto:maurice@harddata.com Edmonton, AB, Canada http://www.harddata.com/ T5X 1Y3 Ask me about the UP1500 Alpha - Full systems from $3,500! - To unsubscribe from this list: send the line "unsubscribe linux-raid" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
