Re: IDE bus rescan

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



With regards to your message at 05:22 PM 6/4/02, Friedrich Lobenstock. 
Where you stated:
>Maurice Hilarius wrote:
>>>Are you using the 3Ware Diskmanager Daemon and its webinterface or not?
>>>It seems not.
>>As I understand it that is only useful if we use the 3Ware BIOS RAID.
>>In this case we are interested in doing this with software RAID
>>So how would we make it rescan with this??
>
>Then why on earth did you buy a 3Ware Controller if you are using it as a
>normal ide controller?


A few good reasons:
Performance using software RAID is about twice as fast
When using software RAID it is not fussy if all disks are identical or not.
The 3Ware makes a really good disk interface, is fast, and uses little CPU.




With our best regards,

Maurice W. Hilarius       Telephone: 01-780-456-9771
Hard Data Ltd.               FAX:       01-780-456-9772
11060 - 166 Avenue        mailto:maurice@harddata.com
Edmonton, AB, Canada      http://www.harddata.com/
    T5X 1Y3

Ask me about the UP1500 Alpha - Full systems from $3,500!

-
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux RAID Wiki]     [ATA RAID]     [Linux SCSI Target Infrastructure]     [Linux Block]     [Linux IDE]     [Linux SCSI]     [Linux Hams]     [Device Mapper]     [Device Mapper Cryptographics]     [Kernel]     [Linux Admin]     [Linux Net]     [GFS]     [RPM]     [git]     [Yosemite Forum]


  Powered by Linux