RPM Discussion

• Thread Index

• skip installation by meeting a condition in pre section of Spec file in RPM packaging
  • From: Fawad Ali <faw.studies@xxxxxxxxx>
• Re: Bad exit status from /var/tmp/rpm-tmp.52497 (%build)
  • From: Stuart D Gathman <stuart@xxxxxxxx>
• Re: Bad exit status from /var/tmp/rpm-tmp.52497 (%build)
  • From: devzero2000 <pinto.elia@xxxxxxxxx>
• Bad exit status from /var/tmp/rpm-tmp.52497 (%build)
  • From: fawad ali syed <dirshah@xxxxxxxxx>
• Best type of RPM package key signature?
  • From: Keith Roberts <keith@xxxxxxxxxxxx>
• [SOLVED] Re: Kompozer 0.83b Install error on Centos 5.5
  • From: Keith Roberts <keith@xxxxxxxxxxxx>
• rpm transaction test and subsequent installation results in unexpected behavior on el4 using python rpm apis
  • From: "Joe Ebmeier" <ebmeierj@xxxxxxxxx>
• Re: need to know if packaging our application stack as an rpm is the right way to go
  • From: "Stuart D. Gathman" <stuart@xxxxxxxx>
• Re: need to know if packaging our application stack as an rpm is the right way to go
  • From: Marc Deop <damnshock@xxxxxxxxx>
• Re: need to know if packaging our application stack as an rpm is the right way to go
  • From: "Stuart D. Gathman" <stuart@xxxxxxxx>
• RE: need to know if packaging our application stack as an rpm is the right way to go
  • From: "Stuart D. Gathman" <stuart@xxxxxxxx>
• RE: need to know if packaging our application stack as an rpm is the right way to go
  • From: mark meyer <geeky2@xxxxxxxxxxx>
• RE: need to know if packaging our application stack as an rpm is the right way to go
  • From: "Stuart D. Gathman" <stuart@xxxxxxxx>
• RE: need to know if packaging our application stack as an rpm is the right way to go
  • From: mark meyer <geeky2@xxxxxxxxxxx>
• Re: need to know if packaging our application stack as an rpm is the right way to go
  • From: Greg_Swift@xxxxxxxxxxxxxxxxx
• Re: need to know if packaging our application stack as an rpm is the right way to go
  • From: Marc Deop <damnshock@xxxxxxxxx>
• Re: need to know if packaging our application stack as an rpm is the right way to go
  • From: Stuart D Gathman <stuart@xxxxxxxx>
• need to know if packaging our application stack as an rpm is the right way to go
  • From: mark meyer <geeky2@xxxxxxxxxxx>
• Re: why will the fedora 13 bugzilla rpm install without perl-CGI?
  • From: "Andrew J. Schorr" <ajschorr@xxxxxxxxxxxxxxxxxxxx>
• Re: why will the fedora 13 bugzilla rpm install without perl-CGI?
  • From: FlorianFesti <ffesti@xxxxxxxxxx>
• Re: Kompozer 0.83b Install error on Centos 5.5
  • From: Keith Roberts <keith@xxxxxxxxxxxx>
• why will the fedora 13 bugzilla rpm install without perl-CGI?
  • From: "Andrew J. Schorr" <ajschorr@xxxxxxxxxxxxxxxxxxxx>
• Re: Kompozer 0.83b Install error on Centos 5.5
  • From: Keith Roberts <keith@xxxxxxxxxxxx>
• Re: Kompozer 0.83b Install error on Centos 5.5
  • From: Panu Matilainen <pmatilai@xxxxxxxxxxxxxxx>
• Re: Kompozer 0.83b Install error on Centos 5.5
  • From: Keith Roberts <keith@xxxxxxxxxxxx>
• Re: Kompozer 0.83b Install error on Centos 5.5
  • From: Keith Roberts <keith@xxxxxxxxxxxx>
• Re: Kompozer 0.83b Install error on Centos 5.5
  • From: Marc Deop <damnshock@xxxxxxxxx>
• Re: Kompozer 0.83b Install error on Centos 5.5
  • From: Panu Matilainen <pmatilai@xxxxxxxxxx>
• Re: Kompozer 0.83b Install error on Centos 5.5
  • From: Marc Deop <damnshock@xxxxxxxxx>
• Kompozer 0.83b Install error on Centos 5.5
  • From: Keith Roberts <keith@xxxxxxxxxxxx>
• deltarpm with old RPM packages
  • From: Paul B Schroeder <paulbsch@xxxxxxxxxxxx>
• Re: rpm installation via the python api using a prefix
  • From: grigory rybkin <poisson02@xxxxxxxxx>
• Re: My rpm needs to install first in a list of RPMS
  • From: FlorianFesti <ffesti@xxxxxxxxxx>
• My rpm needs to install first in a list of RPMS
  • From: renu abraham <ace.renu@xxxxxxxxx>
• RE: rpm installation via the python api using a prefix
  • From: "Joe Ebmeier" <ebmeierj@xxxxxxxxx>
• Re: rpm installation via the python api using a prefix
  • From: Panu Matilainen <pmatilai@xxxxxxxxxxxxxxx>
• how to parse specfiles
  • From: Thierry Parmentelat <thierry.parmentelat@xxxxxxxx>
• Re: rpm installation via the python api using a prefix
  • From: grigory rybkin <poisson02@xxxxxxxxx>
• Re: rpm installation via the python api using a prefix
  • From: Panu Matilainen <pmatilai@xxxxxxxxxxxxxxx>
• Re: rpmbuild questions
  • From: "Stuart D. Gathman" <stuart@xxxxxxxx>
• Re: rpmbuild questions
  • From: Tim Born <timborn@xxxxxxxxxxxxx>
• rpm installation via the python api using a prefix
  • From: "Joe Ebmeier" <ebmeierj@xxxxxxxxx>
• rpmbuild questions
  • From: Clay Stuckey <cstuckey@xxxxxxxxx>
• error: skipping package with unverifiable V4 signature
  • From: Minnikhanov <minnikhanov@xxxxxxxxx>
• error: skipping package with unverifiable V4 signature
  • From: Minnikhanov <minnikhanov@xxxxxxxxx>
• Re: %{error} Macro
  • From: devzero2000 <pinto.elia@xxxxxxxxx>
• %{error} Macro
  • From: Edward Cullen <edward.cullen@xxxxxx>
• Re: odd RPM specfile behavior
  • From: David Peterson <petersod@xxxxxxxxxx>
• odd RPM specfile behavior
  • From: David Peterson <petersod@xxxxxxxxxx>
• RE: Packaging a new version of a core perl module
  • From: Matt Grimm <mgrimm@xxxxxxx>
• Re: Packaging a new version of a core perl module
  • From: Todd Rinaldo <toddr@xxxxxxxxxx>
• Re: Packaging a new version of a core perl module
  • From: Stuart D Gathman <stuart@xxxxxxxx>
• Re: Packaging a new version of a core perl module
  • From: Tim Mooney <mooney@xxxxxxxxxxxxxxxxxxxxxxxxx>
• Packaging a new version of a core perl module
  • From: Matt Grimm <mgrimm@xxxxxxx>
• Re: Add a fake rpm in database
  • From: "Stuart D. Gathman" <stuart@xxxxxxxx>
• Add a fake rpm in database
  • From: R P Herrold <herrold@xxxxxxxxxxxx>
• Re: Add a fake rpm in database
  • From: FlorianFesti <ffesti@xxxxxxxxxx>
• Add a fake rpm in database
  • From: Murilo Opsfelder <muriloo@xxxxxxxxxxxxxxxxxx>
• Re: possible to install an rpm in user space?
  • From: "Stuart D. Gathman" <stuart@xxxxxxxx>
• Adding rpm software to platform - cpio: MD5 sum mismatch when installing rpm's
  • From: Andy Furtado <awf7d0@xxxxxxxxx>
• Re: possible to install an rpm in user space?
  • From: Dave Burns <tburns@xxxxxxxxxx>
• Re: possible to install an rpm in user space?
  • From: "Stuart D. Gathman" <stuart@xxxxxxxx>
• Re: possible to install an rpm in user space?
  • From: "Stuart D. Gathman" <stuart@xxxxxxxx>
• Re: question about rpmdbInitIterator()
  • From: FlorianFesti <ffesti@xxxxxxxxxx>
• possible to install an rpm in user space?
  • From: Dave Burns <tburns@xxxxxxxxxx>
• Re: possible to install an rpm in user space?
  • From: devzero2000 <pinto.elia@xxxxxxxxx>
• Re: possible to install an rpm in user space?
  • From: Stuart D Gathman <stuart@xxxxxxxx>
• question about rpmdbInitIterator()
  • From: David Peterson <petersod@xxxxxxxxxx>
• Re: possible to install an rpm in user space?
  • From: David Burns <tdbtdb@xxxxxxxxx>
• Re: possible to install an rpm in user space?
  • From: Ben Cotton <bcotton@xxxxxxxxxxxxxxxxx>
• possible to install an rpm in user space?
  • From: David Burns <tdbtdb@xxxxxxxxx>
• unpacking of archive failed
  • From: Andy Furtado <awf7d0@xxxxxxxxx>
• Re: %dir and NFS
  • From: FlorianFesti <ffesti@xxxxxxxxxx>
• %dir and NFS
  • From: "Stuart D. Gathman" <stuart@xxxxxxxx>
• RE: Logical 'or' for package dependencies
  • From: "Jason Pyeron" <jpyeron@xxxxxxxx>
• RE: Logical 'or' for package dependencies
  • From: rarob@xxxxxxxxxxxxxxxxxxxxxx
• Problem packaging (ancient) matlab libraries
  • From: "Tim T." <tim.timmerman@xxxxxxxxx>
• RE: Logical 'or' for package dependencies
  • From: "Jason Pyeron" <jpyeron@xxxxxxxx>
• Re: Logical 'or' for package dependencies
  • From: Greg_Swift@xxxxxxxxxxxxxxxxx
• Logical 'or' for package dependencies
  • From: rarob@xxxxxxxxxxxxxxxxxxxxxx
• Re: Question regarding upgrading packages from a new developer
  • From: Tim Mooney <mooney@xxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: Question regarding upgrading packages from a new developer
  • From: FlorianFesti <ffesti@xxxxxxxxxx>
• Re: Question regarding upgrading packages from a new developer
  • From: James Antill <james@xxxxxxxxxxxxxxxxx>
• Question regarding upgrading packages from a new developer
  • From: Eric Hudish <eric.hudish@xxxxxxxxx>
• Re: Source code for rpm-4.2
  • From: FlorianFesti <ffesti@xxxxxxxxxx>
• Re: sub-packages
  • From: FlorianFesti <ffesti@xxxxxxxxxx>
• sub-packages
  • From: Ramin Rad <raminsrad@xxxxxxxxx>
• Source code for rpm-4.2
  • From: "Weber, Patrick" <PWEBER@xxxxxxxxxxxxxxxx>
• Help specifying arch through 'requires' in rpm .spec
  • From: Oliver von Behr Kuster <snakerdlk@xxxxxxxxx>
• Re: Fwd: Help specifying arch through 'requires' in rpm .spec
  • From: Panu Matilainen <pmatilai@xxxxxxxxxxxxxxx>
• Re: Fwd: Help specifying arch through 'requires' in rpm .spec
  • From: FlorianFesti <ffesti@xxxxxxxxxx>
• Fwd: Help specifying arch through 'requires' in rpm .spec
  • From: Oliver von Behr Kuster <snakerdlk+rpm@xxxxxxxxx>
• Re: Why 'RPM query' updates the "__db*" files?
  • From: FlorianFesti <ffesti@xxxxxxxxxx>
• Why 'RPM query' updates the "__db*" files?
  • From: zhang zjmtt <jullyzhang@xxxxxxxxx>
• Re: RPM Version and Release query
  • From: James Antill <james@xxxxxxxxxxxxxxxxx>
• RPM Version and Release query
  • From: Sphurti A Phopale <sphopale@xxxxxxxxxx>
• Re: Building a 32bit RPM on 64bit Linux: Wrong dependencies auto-generated
  • From: Greg_Swift@xxxxxxxxxxxxxxxxx
• Re: how to create an rpm of a directory structure
  • From: Paul Johnson <pauljohn32@xxxxxxxxx>
• how to create an rpm of a directory structure
  • From: "Dan O'Callaghan" <ocalld@xxxxxxxx>
• Re: Building a 32bit RPM on 64bit Linux: Wrong dependencies auto-generated
  • From: Greg_Swift@xxxxxxxxxxxxxxxxx
• Re: where does rpm look for perl modules?
  • From: Jos Vos <jos@xxxxxx>
• Re: where does rpm look for perl modules?
  • From: Nigel Metheringham <nigel.metheringham@xxxxxxxxxxxxxxxxxxxxxx>
• Re: Need some help understanding the RPM spec bit operator
  • From: Jeff Johnson <n3npq@xxxxxxx>
• How to obtain relver of %trigger package?
  • From: "Richard.Johnson" <Richard.Johnson@xxxxxxxxxxx>
• where does rpm look for perl modules?
  • From: "Gu Lei(Tech)" <leigu@xxxxxxxxxxxx>
• Building a 32bit RPM on 64bit Linux: Wrong dependencies auto-generated
  • From: Philipp Münzel <mail@xxxxxxxxxxxxxxxxx>
• setting package name at install time
  • From: Ramin Rad <raminsrad@xxxxxxxxx>
• Re: caching the RPM package list
  • From: seth vidal <skvidal@xxxxxxxxxxxxxxxxx>
• caching the RPM package list
  • From: Dave Peterson <dave_peterson@xxxxxxxxxx>
• Re: RPM database vs contents database
  • From: seth vidal <skvidal@xxxxxxxxxxxxxxxxx>
• RPM database vs contents database
  • From: James R Maxwell <jrmaxwell@xxxxxxxxxxxx>
• Re: ps - disabling compatibility checks
  • From: seth vidal <skvidal@xxxxxxxxxxxxxxxxx>
• ps - disabling compatibility checks
  • From: Edward Peschko <horos11@xxxxxxxxx>
• disabling compatibility checks
  • From: Edward Peschko <horos11@xxxxxxxxx>
• Re: RPM - "installf" command
  • From: seth vidal <skvidal@xxxxxxxxxxxxxxxxx>
• Re: RPM - "installf" command
  • From: seth vidal <skvidal@xxxxxxxxxxxxxxxxx>
• RPM - "installf" command
  • From: James R Maxwell <jrmaxwell@xxxxxxxxxxxx>
• Re: RPM pre/post/pre-un/post-un and behavior of $1
  • From: Amol P <apuranik.2010@xxxxxxxxx>
• Re: RPM pre/post/pre-un/post-un and behavior of $1
  • From: Panu Matilainen <pmatilai@xxxxxxxxxxxxxxx>
• RPM pre/post/pre-un/post-un and behavior of $1
  • From: Amol P <apuranik.2010@xxxxxxxxx>
• Re: Need some help understanding the RPM spec bit operator
  • From: Greg_Swift@xxxxxxxxxxxxxxxxx
• Need some help understanding the RPM spec bit operator
  • From: Mitko Haralanov <mitko@xxxxxxxxxx>
• Re: fun with obsoletes in a weird way
  • From: Greg_Swift@xxxxxxxxxxxxxxxxx
• fun with obsoletes in a weird way
  • From: Greg_Swift@xxxxxxxxxxxxxxxxx
• Re: Building a 32bit RPM on 64bit Linux: Wrong dependencies auto-generated
  • From: Philipp Münzel <mail@xxxxxxxxxxxxxxxxx>
• Re: Building a 32bit RPM on 64bit Linux: Wrong dependencies auto-generated
  • From: devzero2000 <pinto.elia@xxxxxxxxx>
• Re: Building a 32bit RPM on 64bit Linux: Wrong dependencies auto-generated
  • From: Philipp Münzel <mail@xxxxxxxxxxxxxxxxx>
• Re: Building a 32bit RPM on 64bit Linux: Wrong dependencies auto-generated
  • From: Philipp Münzel <mail@xxxxxxxxxxxxxxxxx>
• Re: Building a 32bit RPM on 64bit Linux: Wrong dependencies auto-generated
  • From: devzero2000 <pinto.elia@xxxxxxxxx>
• Building a 32bit RPM on 64bit Linux: Wrong dependencies auto-generated
  • From: Philipp Münzel <mail@xxxxxxxxxxxxxxxxx>
• Re: RPM Help
  • From: devzero2000 <pinto.elia@xxxxxxxxx>
• Re: Dependency package get removed when upgrade base package?
  • From: Huo QiFeng <huoqifeng@xxxxxxxxx>
• Re: Dependency package get removed when upgrade base package?
  • From: devzero2000 <pinto.elia@xxxxxxxxx>
• Dependency package get removed when upgrade base package?
  • From: Huo QiFeng <huoqifeng@xxxxxxxxx>
• Re: RPM Help
  • From: Greg_Swift@xxxxxxxxxxxxxxxxx
• RPM Help
  • From: James R Maxwell <jrmaxwell@xxxxxxxxxxxx>
• Re: where does rpm look for perl modules?
  • From: devzero2000 <pinto.elia@xxxxxxxxx>
• Re: where does rpm look for perl modules?
  • From: 一切有为法。如梦幻泡影。如露亦如电。应作如是观。 <gulei.om@xxxxxxxxx>
• RE: where does rpm look for perl modules?
  • From: Greg_Swift@xxxxxxxxxxxxxxxxx
• where does rpm look for perl modules?
  • From: 一切有为法。如梦幻泡影。如露亦如电。应作如是观。 <gulei.om@xxxxxxxxx>
• RE: %postun execution order within transaction
  • From: Matt Grimm <mgrimm@xxxxxxx>
• %postun execution order within transaction
  • From: Matt Grimm <mgrimm@xxxxxxx>
• Re: Questions for running 'rpm' -e in %pre
  • From: Huo QiFeng <huoqifeng@xxxxxxxxx>
• Re: Re: make: ./libtool: Command not found
  • From: Greg_Swift@xxxxxxxxxxxxxxxxx
• Re: add a click-through license agreement
  • From: FlorianFesti <ffesti@xxxxxxxxxx>
• add a click-through license agreement
  • From: Sphurti A Phopale <sphopale@xxxxxxxxxx>
• Re: Re: make: ./libtool: Command not found
  • From: gregory.machin@xxxxxxxxx
• Re: make: ./libtool: Command not found
  • From: Greg_Swift@xxxxxxxxxxxxxxxxx
• make: ./libtool: Command not found
  • From: Gregory Machin <gdm@xxxxxxxxxxxxxx>
• can I define a 'weak' dependency?
  • From: Fulko Hew <fulko.hew@xxxxxxxxx>
• Re: Regarding RPM
  • From: Greg_Swift@xxxxxxxxxxxxxxxxx
• Re: Regarding RPM
  • From: Amol P <apuranik.2010@xxxxxxxxx>
• Re: RPM too large?? > 2 GB
  • From: FlorianFesti <ffesti@xxxxxxxxxx>
• Re: RPM too large?? > 2 GB
  • From: FlorianFesti <ffesti@xxxxxxxxxx>
• RPM too large?? > 2 GB
  • From: Samir Cury <eu@xxxxxxxxxxxxxxxx>
• Re: Installing RPM's inside %post
  • From: Samir Cury <eu@xxxxxxxxxxxxxxxx>
• Re: Installing RPM's inside %post
  • From: FlorianFesti <ffesti@xxxxxxxxxx>
• Re: Installing RPM's inside %post
  • From: Jos Vos <jos@xxxxxx>
• Installing RPM's inside %post
  • From: Samir Cury <eu@xxxxxxxxxxxxxxxx>
• RE: how to generate version and release numbers in spec files dynamically?
  • From: Greg_Swift@xxxxxxxxxxxxxxxxx
• how to generate version and release numbers in spec files dynamically?
  • From: Fulko Hew <fulko.hew@xxxxxxxxx>
• Re: confused about %config file directive
  • From: Jeff Johnson <n3npq@xxxxxxx>
• rpmbuild dependency discovery finding requirements that the package provides!
  • From: Allen Rongone <arongone@xxxxxxx>
• Re: RPM build errors: Could not generate output filename for package xxx: unknown tag
  • From: Greg_Swift@xxxxxxxxxxxxxxxxx
• Re: RPM Creation for PHP Application
  • From: Greg_Swift@xxxxxxxxxxxxxxxxx
• Re: RPM build errors: Could not generate output filename for package xxx: unknown tag
  • From: Greg_Swift@xxxxxxxxxxxxxxxxx
• Re: Questions for running 'rpm' -e in %pre
  • From: FlorianFesti <ffesti@xxxxxxxxxx>
• Re: Questions for running 'rpm' -e in %pre
  • From: devzero2000 <pinto.elia@xxxxxxxxx>
• Error while loading shared libraries: libdb-5.0.so during rpm install
  • From: "Meskimen, Chad M" <Chad.M.Meskimen@xxxxxxxxxxxxx>
• Re: purging duplicate rpm versions
  • From: Jeff Johnson <n3npq@xxxxxxx>
• Re: [Rpm-maint] rpm feature
  • From: Adam Jackson <ajax@xxxxxxxxxx>
• Confused about %config file section directive
  • From: russell cecala <russell_cecala@xxxxxxxxx>
• RPM Creation for PHP Application
  • From: toneeedavis@xxxxxxxxxxxxxx
• Re: confused about %config file directive
  • From: Tim Mooney <mooney@xxxxxxxxxxxxxxxxxxxxxxxxx>
• RPM build errors: Could not generate output filename for package xxx: unknown tag
  • From: John Wieland <johnny.c.sparkles@xxxxxxxxx>
• Questions for running 'rpm' -e in %pre
  • From: WangXinpeng <wangxp@xxxxxxxxxxxxxxxxxxxx>
• WG: opensuse 11.2: netatalk-2.0.3-246.7.i586.rpm conflicts with coreutils
  • From: Kühne Jörg HCARE-IKMI <Joerg.Kuehne@xxxxxxx>
• Questions for running 'rpm' -e in %pre
  • From: WangXinpeng <wangxp@xxxxxxxxxxxxxxxxxxxx>
• RE: Regarding RPM
  • From: Greg_Swift@xxxxxxxxxxxxxxxxx
• RE: Regarding RPM
  • From: "Jason Pyeron" <jpyeron@xxxxxxxx>
• Regarding RPM
  • From: Amol P <apuranik.2010@xxxxxxxxx>
• Re: purging duplicate rpm versions
  • From: Tim Mooney <Tim.Mooney@xxxxxxxx>
• Re: purging duplicate rpm versions
  • From: oscaruser@xxxxxxxxxxxxxx
• Re: purging duplicate rpm versions
  • From: seth vidal <skvidal@xxxxxxxxxxxxxxxxx>
• purging duplicate rpm versions
  • From: oscaruser@xxxxxxxxxxxxxx
• Re: [Rpm-maint] rpm feature
  • From: seth vidal <skvidal@xxxxxxxxxxxxxxxxx>
• Re: [Rpm-maint] rpm feature
  • From: JD <jd1008@xxxxxxxxx>
• Re: [Rpm-maint] rpm feature
  • From: seth vidal <skvidal@xxxxxxxxxxxxxxxxx>
• Re: [Rpm-maint] rpm feature
  • From: JD <jd1008@xxxxxxxxx>
• Re: Rpm-list Digest, Vol 75, Issue 2
  • From: seth vidal <skvidal@xxxxxxxxxxxxxxxxx>
• Re: Rpm-list Digest, Vol 75, Issue 2
  • From: rarob@xxxxxxxxxxxxxxxxxxxxxx
• Re: [Rpm-maint] rpm feature
  • From: Panu Matilainen <pmatilai@xxxxxxxxxxxxxxx>
• Re: Recursive list of required packages for kickstart
  • From: JD <jd1008@xxxxxxxxx>
• Re: Recursive list of required packages for kickstart
  • From: James Antill <james@xxxxxxxxxxxxxxxxx>
• Recursive list of required packages for kickstart
  • From: rarob@xxxxxxxxxxxxxxxxxxxxxx
• Re: [Rpm-maint] rpm feature
  • From: James Antill <james@xxxxxxxxxxxxxxxxx>
• Re: [Rpm-maint] rpm feature
  • From: seth vidal <skvidal@xxxxxxxxxxxxxxxxx>
• Re: rpm feature
  • From: seth vidal <skvidal@xxxxxxxxxxxxxxxxx>
• RE: rpm feature
  • From: Greg_Swift@xxxxxxxxxxxxxxxxx
• rpm feature
  • From: JD <jd1008@xxxxxxxxx>
• Re: Change name of output file
  • From: John Wieland <johnny.c.sparkles@xxxxxxxxx>
• Re: Change name of output file
  • From: Panu Matilainen <pmatilai@xxxxxxxxxxxxxxx>
• Re: Reporting bugs
  • From: Masatake YAMATO <yamato@xxxxxxxxxx>
• Re: Reporting bugs
  • From: Panu Matilainen <pmatilai@xxxxxxxxxxxxxxx>
• Re: Change name of output file
  • From: Valery Reznic <valery_reznic@xxxxxxxxx>
• Change name of output file
  • From: John Wieland <johnny.c.sparkles@xxxxxxxxx>
• Re: Reporting bugs
  • From: Masatake YAMATO <yamato@xxxxxxxxxx>
• Re: Reporting bugs
  • From: devzero2000 <pinto.elia@xxxxxxxxx>
• Re: Reporting bugs
  • From: Masatake YAMATO <yamato@xxxxxxxxxx>
• Re: Reporting bugs
  • From: devzero2000 <pinto.elia@xxxxxxxxx>
• Reporting bugs
  • From: Masatake YAMATO <yamato@xxxxxxxxxx>
• More examples for rpm2cpio man page
  • From: Masatake YAMATO <yamato@xxxxxxxxxx>
• RE: I just fell into the rpm dependency well - is there anyway out?
  • From: John Burrell <john_burrell@xxxxxxxxxxx>
• Re: I just fell into the rpm dependency well - is there anyway out?
  • From: James Antill <james@xxxxxxxxxxxxxxxxx>
• I just fell into the rpm dependency well - is there anyway out?
  • From: R P Herrold <herrold@xxxxxxxxxxxx>
• Re: I just fell into the rpm dependency well - is there anyway out?
  • From: Seth Vidal <skvidal@xxxxxxxxxxxxxxxxx>
• Re: I just fell into the rpm dependency well - is there anyway out?
  • From: Valery Reznic <valery_reznic@xxxxxxxxx>
• I just fell into the rpm dependency well - is there anyway out?
  • From: John Burrell <john_burrell@xxxxxxxxxxx>
• Re: failed dependencies when installing rpm
  • From: Phebe_Mertes@xxxxxxxxxxxxxxxxx
• failed dependencies when installing rpm
  • From: X Y <writeacomment@xxxxxxxxx>
• Re: confused about %config file directive
  • From: devzero2000 <pinto.elia@xxxxxxxxx>
• Re: confused about %config file directive
  • From: Sheldon Plankton <sheldon.plankton@xxxxxxxxx>
• Re: confused about %config file directive
  • From: Greg_Swift@xxxxxxxxxxxxxxxxx
• confused about %config file directive
  • From: Sheldon Plankton <sheldon.plankton@xxxxxxxxx>
• Re: RPM build errors: Could not generate output filename for package xxx: unknown tag
  • From: John Wieland <johnny.c.sparkles@xxxxxxxxx>
• Re: RPM build errors: Could not generate output filename for package xxx: unknown tag
  • From: Greg_Swift@xxxxxxxxxxxxxxxxx
• Re: RPM build errors: Could not generate output filename for package xxx: unknown tag
  • From: John Wieland <johnny.c.sparkles@xxxxxxxxx>
• RE: RPM build errors: Could not generate output filename for package xxx: unknown tag
  • From: Greg_Swift@xxxxxxxxxxxxxxxxx
• RPM build errors: Could not generate output filename for package xxx: unknown tag
  • From: John Wieland <johnny.c.sparkles@xxxxxxxxx>
• Re: upgrade and install in the same transaction?
  • From: Greg_Swift@xxxxxxxxxxxxxxxxx
• Re: upgrade and install in the same transaction?
  • From: Scott Rohde <srohde@xxxxxxxxx>
• Re: upgrade and install in the same transaction?
  • From: Greg_Swift@xxxxxxxxxxxxxxxxx
• Re: upgrade and install in the same transaction?
  • From: Seth Vidal <skvidal@xxxxxxxxxxxxxxxxx>
• upgrade and install in the same transaction?
  • From: Scott Rohde <srohde@xxxxxxxxx>
• Can the DEBIAN and SPECS subdirectories be unified? How about BIGJUJU?
  • From: Ignacio Valdes <ivaldes@xxxxxxxxxx>
• Re: opensuse 11.2: netatalk-2.0.3-200603231718.3.i586.rpm conflicts with coreutils
  • From: FlorianFesti <ffesti@xxxxxxxxxx>
• Re: Altering autodeps when building rpms
  • From: Greg_Swift@xxxxxxxxxxxxxxxxx
• Re: Altering autodeps when building rpms
  • From: devzero2000 <pinto.elia@xxxxxxxxx>
• opensuse 11.2: netatalk-2.0.3-200603231718.3.i586.rpm conflicts with coreutils
  • From: Kühne Jörg HCARE-IKMI <Joerg.Kuehne@xxxxxxx>
• Re: Altering autodeps when building rpms
  • From: Greg_Swift@xxxxxxxxxxxxxxxxx
• Altering autodeps when building rpms
  • From: Todd Rinaldo <toddr@xxxxxxxxxx>
• Re: rpm "update" package to older version
  • From: Thawan Kooburat <kthawan@xxxxxxxxx>
• Re: rpm "update" package to older version
  • From: James Antill <james@xxxxxxxxxxxxxxxxx>
• rpm "update" package to older version
  • From: Thawan Kooburat <kthawan@xxxxxxxxx>
• Re: Test for rpm variable
  • From: Greg_Swift@xxxxxxxxxxxxxxxxx
• Test for rpm variable
  • From: Todd Rinaldo <toddr@xxxxxxxxxx>
• Re: Help - problem in uninstall
  • From: X Y <writeacomment@xxxxxxxxx>
• Re: Help - problem in uninstall
  • From: Daniel Bahena <daniel.bahena@xxxxxxxxx>
• Re: Help - problem in uninstall
  • From: X Y <writeacomment@xxxxxxxxx>
• Help - problem in uninstall
  • From: X Y <writeacomment@xxxxxxxxx>
• RPM 4.8.0 configure: error:missing required NSPR / NSS header
  • From: 林振華 <hobin0920@xxxxxxxxx>
• Re: Compress RPM package with bz2
  • From: Valery Reznic <valery_reznic@xxxxxxxxx>
• Re: Compress RPM package with bz2
  • From: Roland Gruber <post@xxxxxxxxxxxxxxx>
• Re: Getting rpmbuild to strip all files.
  • From: devzero2000 <pinto.elia@xxxxxxxxx>
• Re: Compress RPM package with bz2
  • From: Valery Reznic <valery_reznic@xxxxxxxxx>
• Compress RPM package with bz2
  • From: Roland Gruber <post@xxxxxxxxxxxxxxx>
• Re: Getting rpmbuild to strip all files.
  • From: Ben Greear <greearb@xxxxxxxxxxxxxxx>
• Re: Getting rpmbuild to strip all files.
  • From: devzero2000 <pinto.elia@xxxxxxxxx>
• Getting rpmbuild to strip all files.
  • From: Ben Greear <greearb@xxxxxxxxxxxxxxx>
• Re: integrated listing mechanism with rpm, listing contents of rpm files.
  • From: Edward Peschko <horos11@xxxxxxxxx>
• Re: integrated listing mechanism with rpm, listing contents of rpm files.
  • From: Edward Peschko <horos11@xxxxxxxxx>
• Re: integrated listing mechanism with rpm, listing contents of rpm files.
  • From: sorrillo@xxxxxxxx
• integrated listing mechanism with rpm, listing contents of rpm files.
  • From: Edward Peschko <horos11@xxxxxxxxx>
• Re: Supress tar output for %setup
  • From: Seth Vidal <skvidal@xxxxxxxxxxxxxxxxx>
• Supress tar output for %setup
  • From: Todd Rinaldo <toddr@xxxxxxxxxx>
• Re: rpmbuild error
  • From: Panu Matilainen <pmatilai@xxxxxxxxxxxxxxx>
• Re: rpmbuild error
  • From: Todd Rinaldo <toddr@xxxxxxxxxx>
• Re: rpmbuild error
  • From: bclark@xxxxxxxxx
• Re: rpmbuild error
  • From: Todd Rinaldo <toddr@xxxxxxxxxx>
• Re: rpmbuild error
  • From: bclark@xxxxxxxxx
• Re: rpmbuild error
  • From: Lawrence Sorrillo <sorrillo@xxxxxxxx>
• Re: rpmbuild error
  • From: Todd Rinaldo <toddr@xxxxxxxxxx>
• rpmbuild error
  • From: bclark@xxxxxxxxx
• Re: --provides epoch
  • From: James Antill <james@xxxxxxxxxxxxxxxxx>
• Re: --provides epoch
  • From: Thomas Jarosch <thomas.jarosch@xxxxxxxxxxxxx>
• --provides epoch
  • From: Todd Rinaldo <toddr@xxxxxxxxxx>
• Re: Overriding %doc
  • From: devzero2000 <pinto.elia@xxxxxxxxx>
• Re: reconstituting bin rpm from installed package (rewind function)
  • From: Valery Reznic <valery_reznic@xxxxxxxxx>
• RE: Question on the content of a rpm
  • From: Joao Carlos Vieira Carreira da Silva <j.c.silva@xxxxxxx>
• Question on the content of a rpm
  • From: "HU Ben" <Ben.Hu@xxxxxxxxxxxxxxxxxx>
• querying behavior of built in c-macros. (was definition of %doc)
  • From: Edward Peschko <horos11@xxxxxxxxx>
• Overriding %doc
  • From: Edward Peschko <horos11@xxxxxxxxx>
• Re: reconstituting bin rpm from installed package (rewind function)
  • From: Greg_Swift@xxxxxxxxxxxxxxxxx
• reconstituting bin rpm from installed package (rewind function)
  • From: Edward Peschko <horos11@xxxxxxxxx>
• Re: Dependency of RPM and package (multi version for same package)
  • From: James Antill <james@xxxxxxxxxxxxxxxxx>
• Re: Dependency of RPM and package (multi version for same package)
  • From: Huo QiFeng <huoqifeng@xxxxxxxxx>
• Re: trivial command to extract files from an rpm file.
  • From: Greg_Swift@xxxxxxxxxxxxxxxxx
• Re: trivial command to extract files from an rpm file.
  • From: Greg_Swift@xxxxxxxxxxxxxxxxx
• trivial command to extract files from an rpm file.
  • From: Edward Peschko <horos11@xxxxxxxxx>
• Re: Dependency of RPM and package (multi version for same package)
  • From: devzero2000 <pinto.elia@xxxxxxxxx>
• Re: build requires query?
  • From: Jeff Johnson <n3npq@xxxxxxx>
• Dependency of RPM and package (multi version for same package)
  • From: Huo QiFeng <huoqifeng@xxxxxxxxx>
• RE: Adding Features / Components of a software to RPM database
  • From: Jiju Jacob <JJacob@xxxxxxxxxxxxxxxxxxx>
• Re: Adding Features / Components of a software to RPM database
  • From: Paul Johnson <pauljohn32@xxxxxxxxx>
• Adding Features / Components of a software to RPM database
  • From: Jiju Jacob <JJacob@xxxxxxxxxxxxxxxxxxx>
• Adding Features / Components of a software to RPM database
  • From: Jiju Jacob <JJacob@xxxxxxxxxxxxxxxxxxx>
• Re: noarch RPM weirdness
  • From: Panu Matilainen <pmatilai@xxxxxxxxxxxxxxx>
• Re: build requires query?
  • From: Panu Matilainen <pmatilai@xxxxxxxxxxxxxxx>
• trivial command to make an rpm file
  • From: Edward Peschko <horos11@xxxxxxxxx>
• noarch RPM weirdness
  • From: Eric Chamberlain <Eric.Chamberlain@xxxxxxxxxxxxxxxx>
• Re: build requires query?
  • From: Radu Gasler <rgasler@xxxxxxxxxxxxx>
• build requires query?
  • From: Todd Rinaldo <toddr@xxxxxxxxxx>
• Re: Dependency of RPM package (multi version)
  • From: James Antill <james@xxxxxxxxxxxxxxxxx>
• Re: Dependency of RPM package (multi version)
  • From: Valery Reznic <valery_reznic@xxxxxxxxx>
• Re: Dependency of RPM package (multi version)
  • From: devzero2000 <pinto.elia@xxxxxxxxx>
• Re: Dependency of RPM package (multi version)
  • From: Huo QiFeng <huoqifeng@xxxxxxxxx>
• Re: Dependency of RPM package (multi version)
  • From: devzero2000 <pinto.elia@xxxxxxxxx>
• Dependency of RPM package (multi version)
  • From: Huo QiFeng <huoqifeng@xxxxxxxxx>
• Re: Requires/Provides in spec file
  • From: Greg_Swift@xxxxxxxxxxxxxxxxx
• Requires/Provides in spec file
  • From: Todd Rinaldo <toddr@xxxxxxxxxx>
• stuck rpm process on dist upgrade
  • From: Thomas Jarosch <thomas.jarosch@xxxxxxxxxxxxx>
• Re: need "cheat" to package installed files into RPMS
  • From: Paul Johnson <pauljohn32@xxxxxxxxx>
• Re: need "cheat" to package installed files into RPMS
  • From: Andy Helten <andy.helten@xxxxxxxxxxxx>
• Re: need "cheat" to package installed files into RPMS
  • From: devzero2000 <pinto.elia@xxxxxxxxx>
• need "cheat" to package installed files into RPMS
  • From: Paul Johnson <pauljohn32@xxxxxxxxx>
• Re: RPM Obsoletes don't work like I want them to
  • From: James Antill <james@xxxxxxxxxxxxxxxxx>
• RPM Obsoletes don't work like I want them to
  • From: Paul Johnson <pauljohn32@xxxxxxxxx>
• Using "/" as prefix in spec file
  • From: Thawan Kooburat <kthawan@xxxxxxxxx>
• Re: use of %%dir in spec file
  • From: devzero2000 <pinto.elia@xxxxxxxxx>
• Re: use of %%dir in spec file
  • From: Todd Rinaldo <toddr@xxxxxxxxxx>
• Re: use of %%dir in spec file
  • From: Todd Rinaldo <toddr@xxxxxxxxxx>
• Re: use of %%dir in spec file
  • From: devzero2000 <pinto.elia@xxxxxxxxx>
• use of %%dir in spec file
  • From: Todd Rinaldo <toddr@xxxxxxxxxx>
• Question about conditionally including files into the %files section
  • From: Jim Galarowicz <jeg@xxxxxxxxxxxxx>
• Re: rpm file name generated from spec
  • From: Todd Rinaldo <toddr@xxxxxxxxxx>
• Re: rpm file name generated from spec
  • From: Seth Vidal <skvidal@xxxxxxxxxxxxxxxxx>
• Re: rpm file name generated from spec
  • From: Greg_Swift@xxxxxxxxxxxxxxxxx
• rpm file name generated from spec
  • From: Todd Rinaldo <toddr@xxxxxxxxxx>
• Re: rpmbuild ignoring --macros?
  • From: Andy Armstrong <andy@xxxxxxxxxx>
• Re: rpmbuild ignoring --macros?
  • From: Greg_Swift@xxxxxxxxxxxxxxxxx
• Re: rpmbuild ignoring --macros?
  • From: Valery Reznic <valery_reznic@xxxxxxxxx>
• Re: rpmbuild ignoring --macros?
  • From: Andy Armstrong <andy@xxxxxxxxxx>
• Re: rpmbuild ignoring --macros?
  • From: Greg_Swift@xxxxxxxxxxxxxxxxx
• rpmbuild ignoring --macros?
  • From: Andy Armstrong <andy@xxxxxxxxxx>
• Re: Dependency only RPM
  • From: Valery Reznic <valery_reznic@xxxxxxxxx>
• Re: Dependency only RPM
  • From: Andy Armstrong <andy@xxxxxxxxxx>
• Re: Dependency only RPM
  • From: Valery Reznic <valery_reznic@xxxxxxxxx>
• Dependency only RPM
  • From: Andy Armstrong <andy@xxxxxxxxxx>
• Re: Enforcing dependencies between RPMs
  • From: Erez Zilber <erezzi.list@xxxxxxxxx>
• Design problem: etc that is not /etc? other pseudo subdirectories and instance handling?
  • From: Ignacio Valdes <ivaldes@xxxxxxxxxx>
• Re: Enforcing dependencies between RPMs
  • From: James Antill <james@xxxxxxxxxxxxxxxxx>
• RE: Enforcing dependencies between RPMs
  • From: "Jason Pyeron" <jpyeron@xxxxxxxx>
• Enforcing dependencies between RPMs
  • From: Erez Zilber <erezzi.list@xxxxxxxxx>
• Re: Found '/usr/src/redhat/BUILD/NetWatch-root' in installed files; aborting
  • From: Fulko Hew <fulko.hew@xxxxxxxxx>
• Found '/usr/src/redhat/BUILD/NetWatch-root' in installed files; aborting
  • From: Fulko Hew <fulko.hew@xxxxxxxxx>
• Re: RPM verification fails with unsatisfied dependencies for libraries provided by the RPM
  • From: Andy Helten <andy.helten@xxxxxxxxxxxx>
• _prefix hard-coded to /usr?
  • From: hmiller@xxxxxxxxxx
• Re: RPM verification fails with unsatisfied dependencies for libraries provided by the RPM
  • From: Mitko Haralanov <mitko@xxxxxxxxxx>
• RPM verification fails with unsatisfied dependencies for libraries provided by the RPM
  • From: Andy Helten <andy.helten@xxxxxxxxxxxx>
• Re: _prefix hard-coded to /usr?
  • From: Paul Johnson <pauljohn32@xxxxxxxxx>
• Re: _prefix hard-coded to /usr?
  • From: hmiller@xxxxxxxxxx
• Re: _prefix hard-coded to /usr?
  • From: hmiller@xxxxxxxxxx
• Re: _prefix hard-coded to /usr?
  • From: Mitko Haralanov <mitko@xxxxxxxxxx>
• _prefix hard-coded to /usr?
  • From: hmiller@xxxxxxxxxx
• Re: how to get version of package 'x' when installing package 'y'
  • From: Florian Festi <ffesti@xxxxxxxxxx>
• Re: signing an rpm without user interaction
  • From: Dotan Barak <dotanba@xxxxxxxxx>
• signing an rpm without user interaction
  • From: Martin Koller <martin.koller@xxxxxx>
• Re: how to get version of package 'x' when installing package 'y'
  • From: Fulko Hew <fulko.hew@xxxxxxxxx>
• Re: how to get version of package 'x' when installing package 'y'
  • From: Jos Vos <jos@xxxxxx>
• how to get version of package 'x' when installing package 'y'
  • From: Fulko Hew <fulko.hew@xxxxxxxxx>
• Querying values defined in a spec file
  • From: Mitko Haralanov <mitko@xxxxxxxxxx>
• Re: hardcode files in %files stanza
  • From: Jos Vos <jos@xxxxxx>
• Re: hardcode files in %files stanza
  • From: pbdlists@xxxxxxxxxxxx
• Re: generic %if conditional in rpm
  • From: Jos Vos <jos@xxxxxx>
• Re: generic %if conditional in rpm
  • From: Jos Vos <jos@xxxxxx>
• generic %if conditional in rpm
  • From: Edward Peschko <horos11@xxxxxxxxx>
• hardcode files in %files stanza
  • From: Barry R Cisna <brcisna@xxxxxxxxxxxxx>
• hardcode files in %files stanza
  • From: Barry R Cisna <brcisna@xxxxxxxxxxxxx>
• Re: hardcode files in %files stanza
  • From: pbdlists@xxxxxxxxxxxx
• hardcode files in %files stanza
  • From: Barry Cisna <brcisna@xxxxxxxxxxxxx>
• application hang within RPM library call
  • From: Dave Peterson <dave_peterson@xxxxxxxxxx>
• ./configure error
  • From: Barry Cisna <brcisna@xxxxxxxxxxxxx>
• Re: install variable for kernel version
  • From: Valery Reznic <valery_reznic@xxxxxxxxx>
• install variable for kernel version
  • From: Barry Cisna <brcisna@xxxxxxxxxxxxx>
• Re: install variable for kernel version
  • From: Valery Reznic <valery_reznic@xxxxxxxxx>
• install variable for kernel version
  • From: Barry Cisna <brcisna@xxxxxxxxxxxxx>
• Re: rpm -U options
  • From: Valery Reznic <valery_reznic@xxxxxxxxx>
• rpm -U options
  • From: shruthi srinivasalu <shruthisrinivasalu@xxxxxxxxxxx>
• Re: RPM and file extended attributes
  • From: Panu Matilainen <pmatilai@xxxxxxxxxxxxxxx>
• Re: F11 RPM does not substitute %{PATCH0} anymore
  • From: Panu Matilainen <pmatilai@xxxxxxxxxxxxxxx>
• F11 RPM does not substitute %{PATCH0} anymore
  • From: Jos Vos <jos@xxxxxx>
• RE: RPM and file extended attributes
  • From: "Mangalampalli, JayantX" <jayantx.mangalampalli@xxxxxxxxx>
• Re: RPM and file extended attributes
  • From: Chad Sellers <csellers@xxxxxxxxxx>
• RPM and file extended attributes
  • From: "Mangalampalli, JayantX" <jayantx.mangalampalli@xxxxxxxxx>
• Re: rpm queryformat %{fileverifyflags}
  • From: Panu Matilainen <pmatilai@xxxxxxxxxxxxxxx>
• rpm queryformat %{fileverifyflags}
  • From: Greg_Swift@xxxxxxxxxxxxxxxxx
• Re: rpmlib(FileDigests)
  • From: Andrew Ziem <ahz001@xxxxxxxxx>
• Re: rpmlib(FileDigests)
  • From: Panu Matilainen <pmatilai@xxxxxxxxxxxxxxx>
• Re: Variable for version/release?
  • From: Ignacio Valdes <ivaldes@xxxxxxxxxx>
• Re: Variable for version/release?
  • From: Jos Vos <jos@xxxxxx>
• Re: Variable for version/release?
  • From: Ignacio Valdes <ivaldes@xxxxxxxxxx>
• Re: Variable for version/release?
  • From: Jos Vos <jos@xxxxxx>
• Variable for version/release?
  • From: Ignacio Valdes <ivaldes@xxxxxxxxxx>
• rpmlib(FileDigests)
  • From: Andrew Ziem <ahz001@xxxxxxxxx>
• dependencies and the %post section
  • From: Fulko Hew <fulko.hew@xxxxxxxxx>
• Re: *** ERROR: No build ID note found in problem
  • From: Greg_Swift@xxxxxxxxxxxxxxxxx
• *** ERROR: No build ID note found in problem
  • From: ram s <ramforummail@xxxxxxxxx>
• Re: Startup script file conflict with /etc/init.d
  • From: Greg_Swift@xxxxxxxxxxxxxxxxx
• How to handle variable paths and multiple instances?
  • From: Ignacio Valdes <ivaldes@xxxxxxxxxx>
• Re: Using .deb style subdirectories with rpm?
  • From: Ignacio Valdes <ivaldes@xxxxxxxxxx>
• Re: Using .deb style subdirectories with rpm?
  • From: Paul Johnson <pauljohn32@xxxxxxxxx>
• Re: Using .deb style subdirectories with rpm?
  • From: Ignacio Valdes <ivaldes@xxxxxxxxxx>
• Re: Using .deb style subdirectories with rpm?
  • From: devzero2000 <pinto.elia@xxxxxxxxx>
• Re: Using .deb style subdirectories with rpm?
  • From: devzero2000 <pinto.elia@xxxxxxxxx>
• Using .deb style subdirectories with rpm?
  • From: Ignacio Valdes <ivaldes@xxxxxxxxxx>
• Startup script file conflict with /etc/init.d
  • From: Ignacio Valdes <ivaldes@xxxxxxxxxx>
• RPM tutorial at Linux conference Dresden (Germany)
  • From: Jos Vos <jos@xxxxxx>
• Sample spec file for rpm that install icon in the panel launcher?
  • From: vs <victor_sira@xxxxxxxxx>
• Re: Files packaged in /var won't be affected by rpm -U?
  • From: Greg_Swift@xxxxxxxxxxxxxxxxx
• Re: Files packaged in /var won't be affected by rpm -U?
  • From: vs <victor_sira@xxxxxxxxx>
• Re: Files packaged in /var won't be affected by rpm -U?
  • From: Greg_Swift@xxxxxxxxxxxxxxxxx
• Files packaged in /var won't be affected by rpm -U?
  • From: vs <victor_sira@xxxxxxxxx>
• RE: Expat causing rpm failure
  • From: "Peter Beck" <peter@xxxxxxxxxx>
• Re: Expat causing rpm failure
  • From: Jonathan Ryshpan <jonrysh@xxxxxxxxxxx>
• Conversion from Sun Solaris Packaging
  • From: James R Maxwell <jrmaxwell@xxxxxxxxxxxx>
• Re: Expat causing rpm failure
  • From: Florian Festi <ffesti@xxxxxxxxxx>
• Expat causing rpm failure
  • From: "Peter Beck" <peter@xxxxxxxxxx>
• Re: Can I use cp in %install section of spec
  • From: devzero2000 <pinto.elia@xxxxxxxxx>
• Can I use cp in %install section of spec
  • From: ram s <ramforummail@xxxxxxxxx>
• still having signature issues
  • From: "Dave" <dave.mehler@xxxxxxxxx>
• RE: bad gpg signature on src.rpm?
  • From: "Dave" <dave.mehler@xxxxxxxxx>
• Re: bad gpg signature on src.rpm?
  • From: devzero2000 <pinto.elia@xxxxxxxxx>
• RE: bad gpg signature on src.rpm?
  • From: "Dave" <dave.mehler@xxxxxxxxx>
• Re: bad gpg signature on src.rpm?
  • From: devzero2000 <pinto.elia@xxxxxxxxx>
• bad gpg signature on src.rpm?
  • From: "Dave" <dave.mehler@xxxxxxxxx>
• Re: rpm dependency fail
  • From: devzero2000 <pinto.elia@xxxxxxxxx>
• Re: Rpm-list Digest, Vol 43, Issue 4
  • From: ram s <ramforummail@xxxxxxxxx>
• rpm dependency fail
  • From: ram s <ramforummail@xxxxxxxxx>
• Re: Cannot include sub directories and files in rpm package
  • From: pbdlists@xxxxxxxxxxxx
• Cannot include sub directories and files in rpm package
  • From: ram s <ramforummail@xxxxxxxxx>
• Problem on build
  • From: ram s <ramforummail@xxxxxxxxx>
• Re: still having spec file difficulties, FRUSTRATING!!!
  • From: Greg_Swift@xxxxxxxxxxxxxxxxx
• Re: How to run own shell script from spec
  • From: devzero2000 <pinto.elia@xxxxxxxxx>
• Re: passing an option to rpmbuild
  • From: Daniel Bahena <daniel.bahena@xxxxxxxxx>
• passing an option to rpmbuild
  • From: "Dave" <dave.mehler@xxxxxxxxx>
• How to run own shell script from spec
  • From: ram s <ramforummail@xxxxxxxxx>
• Re: Solved binary package creation!Have some doubts...
  • From: Paul Johnson <pauljohn32@xxxxxxxxx>
• still having spec file difficulties, FRUSTRATING!!!
  • From: "Dave" <dave.mehler@xxxxxxxxx>
• Re: Solved binary package creation!Have some doubts...
  • From: ram s <ramforummail@xxxxxxxxx>
• Solved binary package creation!Have some doubts...
  • From: ram s <ramforummail@xxxxxxxxx>
• RE: RPM Build errors
  • From: "Jason Pyeron" <jpyeron@xxxxxxxx>
• RPM Build errors
  • From: ram s <ramforummail@xxxxxxxxx>
• RE:rpm packaging problem
  • From: ram s <ramforummail@xxxxxxxxx>
• repost: help and questions on first rpm
  • From: "Dave" <dave.mehler@xxxxxxxxx>
• Re: rpm packaging problem
  • From: devzero2000 <pinto.elia@xxxxxxxxx>
• rpm packaging problem
  • From: ram s <ramforummail@xxxxxxxxx>
• help with first rpm
  • From: "Dave" <dave.mehler@xxxxxxxxx>
• Re: RPM Packaging doubts
  • From: devzero2000 <pinto.elia@xxxxxxxxx>
• Re:RPM Packaging doubts
  • From: ram s <ramforummail@xxxxxxxxx>
• Re: RPM Packaging doubts
  • From: devzero2000 <pinto.elia@xxxxxxxxx>
• RPM Packaging doubts
  • From: ram s <ramforummail@xxxxxxxxx>
• RPM API dependency query
  • From: Vijay Tirumalai <vijay.tirumalai@xxxxxxxxx>
• how to get the build time using rpm api
  • From: Vinay Kalkoti <kalkoti.vinay@xxxxxxxxx>
• Re: chmod on subdirectories and files
  • From: Richard Siddall <richard.siddall@xxxxxxxxxxx>
• Re: chmod on subdirectories and files
  • From: George Machitidze <giomac@xxxxxxxxx>
• --relocate and --prefix ?
  • From: Andrei Kazarov <Andrei.Kazarov@xxxxxxx>
• Re: chmod on subdirectories and files
  • From: Valery Reznic <valery_reznic@xxxxxxxxx>
• chmod on subdirectories and files
  • From: George Machitidze <giomac@xxxxxxxxx>
• Re: Transaction Set API query
  • From: Panu Matilainen <pmatilai@xxxxxxxxxxxxxxx>
• Re: Please help: how to relocate installed files paths into an RPM database
  • From: Greg_Swift@xxxxxxxxxxxxxxxxx
• Re: Please help: how to relocate installed files paths into an RPM database
  • From: devzero2000 <pinto.elia@xxxxxxxxx>
• Re: Please help: how to relocate installed files paths into an RPM database
  • From: Greg_Swift@xxxxxxxxxxxxxxxxx
• Re: Please help: how to relocate installed files paths into an RPM database
  • From: devzero2000 <pinto.elia@xxxxxxxxx>
• Re: Please help: how to relocate installed files paths into an RPM database
  • From: Greg_Swift@xxxxxxxxxxxxxxxxx
• Re: Please help: how to relocate installed files paths into an RPM database
  • From: Matteo Pampolini <matteo.pampolini@xxxxxxxxx>
• Re: How-to not get a "depency resolution failed" for a already existing library.
  • From: James Antill <james@xxxxxxxxxxxxxxxxx>
• Re: How-to not get a "depency resolution failed" for a already existing library.
  • From: Paul Johnson <pauljohn32@xxxxxxxxx>
• How-to not get a "depency resolution failed" for a already existing library.
  • From: L Pierre <pierrelud@xxxxxxxxx>
• Re: Please help: how to relocate installed files paths into an RPM database
  • From: Matteo Pampolini <matteo.pampolini@xxxxxxxxx>
• Re: Please help: how to relocate installed files paths into an RPM database
  • From: Greg_Swift@xxxxxxxxxxxxxxxxx
• Re: Please help: how to relocate installed files paths into an RPM database
  • From: Matteo Pampolini <matteo.pampolini@xxxxxxxxx>
• Re: configuration rpms
  • From: Florian Festi <ffesti@xxxxxxxxxx>
• configuration rpms
  • From: abhinav mehrotra <talk2abhinav@xxxxxxxxx>
• Transaction Set API query
  • From: Vinay Kalkoti <kalkoti.vinay@xxxxxxxxx>
• Re: Please help: how to relocate installed files paths into an RPM database
  • From: Phebe_Mertes@xxxxxxxxxxxxxxxxx
• Re: Please help: how to relocate installed files paths into an RPM database
  • From: Matteo Pampolini <matteo.pampolini@xxxxxxxxx>
• Re: Please help: how to relocate installed files paths into an RPM database
  • From: Phebe_Mertes@xxxxxxxxxxxxxxxxx
• Please help: how to relocate installed files paths into an RPM database
  • From: Matteo Pampolini <matteo.pampolini@xxxxxxxxx>
• Re: Running a bash script in RPM install
  • From: devzero2000 <pinto.elia@xxxxxxxxx>
• Re: Running a bash script in RPM install
  • From: devzero2000 <pinto.elia@xxxxxxxxx>
• Running a bash script in RPM install
  • From: Vinay Kalkoti <kalkoti.vinay@xxxxxxxxx>
• Re: How to RPM'ify Perl Modules
  • From: Thomas Cameron <thomas.cameron@xxxxxxxxxxxxxxx>
• Re: How to RPM'ify Perl Modules
  • From: Florian Festi <ffesti@xxxxxxxxxx>
• Re: RPM package bundle problem.
  • From: devzero2000 <pinto.elia@xxxxxxxxx>
• RE: RPM package bundle problem.
  • From: "NgaNTH" <nganth@xxxxxxxxxxxx>
• Re: RPM package bundle problem.
  • From: Nigel Metheringham <nigel.metheringham@xxxxxxxxxxxxxxxxxxxxxx>
• RE: RPM package bundle problem.
  • From: "NgaNTH" <nganth@xxxxxxxxxxxx>
• Re: RPM package bundle problem.
  • From: devzero2000 <pinto.elia@xxxxxxxxx>
• RPM package bundle problem.
  • From: "NgaNTH" <nganth@xxxxxxxxxxxx>
• How to RPM'ify Perl Modules
  • From: Fulko Hew <fulko.hew@xxxxxxxxx>
• Re: possible to build an RPM from source directory rather than tarball?
  • From: Shawn Rutledge <shawn.t.rutledge@xxxxxxxxx>
• ERROR: Cannot get shared lock on RPM Database
  • From: "Rob Maidment" <Rob.Maidment@xxxxxxxxxxxxxx>
• Re: why is database location under /${prefix} ?
  • From: Panu Matilainen <pmatilai@xxxxxxxxxxxxxxx>
• Re: why is database location under /${prefix} ?
  • From: Panu Matilainen <pmatilai@xxxxxxxxxxxxxxx>
• why is database location under /${prefix} ?
  • From: "Rob Maidment" <Rob.Maidment@xxxxxxxxxxxxxx>
• Re: How to create one rpm package which only contains specified directory?
  • From: devzero2000 <pinto.elia@xxxxxxxxx>
• Conditional dependancy
  • From: "Mehrotra, Abhinav (GE Healthcare)" <Abhinav.Mehrotra@xxxxxx>
• Re: How to create one rpm package which only contains specified directory?
  • From: Michael Barto <mbarto@xxxxxxxxxxxxx>
• Re: More than one topdir in .rpmmacros?
  • From: Nigel Metheringham <nigel.metheringham@xxxxxxxxxxxxxxxxxxxxxx>
• Re: More than one topdir in .rpmmacros?
  • From: Ignacio Valdes <ivaldes@xxxxxxxxxx>
• Re: More than one topdir in .rpmmacros?
  • From: Nigel Metheringham <nigel.metheringham@xxxxxxxxxxxxxxxxxxxxxx>
• More than one topdir in .rpmmacros?
  • From: Ignacio Valdes <ivaldes@xxxxxxxxxx>
• Re: rpm dependency failed because the directory path doesn't exist
  • From: zhang zjmtt <jullyzhang@xxxxxxxxx>
• Re: possible to build an RPM from source directory rather than tarball?
  • From: Greg_Swift@xxxxxxxxxxxxxxxxx
• possible to build an RPM from source directory rather than tarball?
  • From: Shawn Rutledge <shawn.t.rutledge@xxxxxxxxx>
• Re: rpm dependency failed because the directory path doesn't exist
  • From: devzero2000 <pinto.elia@xxxxxxxxx>
• Re: rpm dependency failed because the directory path doesn't exist
  • From: devzero2000 <pinto.elia@xxxxxxxxx>
• Re: rpm dependency failed because the directory path doesn't exist
  • From: Florian Festi <ffesti@xxxxxxxxxx>
• Re: How to avoid reinstalling deliberately deleted config files on upgrade
  • From: Richard Siddall <richard.siddall@xxxxxxxxxxx>
• rpm dependency failed because the directory path doesn't exist
  • From: zhang zjmtt <jullyzhang@xxxxxxxxx>
• RPM at the Linux Tag 2009 in Berlin
  • From: Florian Festi <ffesti@xxxxxxxxxx>
• Re: How to avoid reinstalling deliberately deleted config files on upgrade
  • From: Valery Reznic <valery_reznic@xxxxxxxxx>
• How to avoid reinstalling deliberately deleted config files on upgrade
  • From: Richard Siddall <richard.siddall@xxxxxxxxxxx>
• Re: merging (sub-)packages
  • From: James Antill <james@xxxxxxxxxxxxxxxxx>
• [no subject]
  • From: rarob@xxxxxxxxxxxxxxxxxxxxxx
• Re: error: unpacking of archive failed on file ...rpm; 4a2a2501: cpio: Digest mismatch
  • From: tjoen <tjoen@xxxxxx>
• error: unpacking of archive failed on file ...rpm;4a2a2501: cpio: Digest mismatch
  • From: tjoen <tjoen@xxxxxx>
• Re: Upgrade from rpm 3.0.6
  • From: devzero2000 <pinto.elia@xxxxxxxxx>
• Re: Upgrade from rpm 3.0.6
  • From: Thomas Jarosch <thomas.jarosch@xxxxxxxxxxxxx>
• Re: Upgrade from rpm 3.0.6
  • From: Florian Festi <ffesti@xxxxxxxxxx>
• Re: Upgrade from rpm 3.0.6
  • From: Thomas Jarosch <thomas.jarosch@xxxxxxxxxxxxx>
• Upgrade from rpm 3.0.6
  • From: Thomas Jarosch <thomas.jarosch@xxxxxxxxxxxxx>
• Re: help with rpmbuild
  • From: Greg_Swift@xxxxxxxxxxxxxxxxx
• help with rpmbuild
  • From: X Y <writeacomment@xxxxxxxxx>
• Re: Using {dist} when I only have pre-compiled binaries?
  • From: Matt Harrington <mbh.lists@xxxxxxxxx>
• Re: Using {dist} when I only have pre-compiled binaries?
  • From: Valery Reznic <valery_reznic@xxxxxxxxx>
• Re: Using {dist} when I only have pre-compiled binaries?
  • From: Matt Harrington <mbh.lists@xxxxxxxxx>
• Re: Using {dist} when I only have pre-compiled binaries?
  • From: Valery Reznic <valery_reznic@xxxxxxxxx>
• Using {dist} when I only have pre-compiled binaries?
  • From: Matt Harrington <mbh.lists@xxxxxxxxx>
• RPM API to install rpms
  • From: shruthi srinivasalu <shruthisrinivasalu@xxxxxxxxxxx>
• Re: File name conflicts with other similar packages?
  • From: Florian Festi <ffesti@xxxxxxxxxx>
• File name conflicts with other similar packages?
  • From: Ignacio Valdes <ivaldes@xxxxxxxxxx>
• Re: Is it possible to tweak checksums etc. in the RPM DB?
  • From: James Antill <james@xxxxxxxxxxxxxxxxx>
• Re: How to create one rpm package which only contains specified directory?
  • From: Florian Festi <ffesti@xxxxxxxxxx>
• Re: problem with ./configure of rpm-4.7.0
  • From: Panu Matilainen <pmatilai@xxxxxxxxxx>
• problem with ./configure of rpm-4.7.0
  • From: "Onofre, Tracy" <tracy.onofre@xxxxxxxx>
• Is it possible to tweak checksums etc. in the RPM DB?
  • From: lassmann@xxxxxxxxxx
• How to create one rpm package which only contains specified directory?
  • From: "He Yunlong-B20256" <Harry.He@xxxxxxxxxxxxx>
• Re: Memoy Leaks in RPM; Version, rpm-4.6.0
  • From: Creative Innovative <innovative_c@xxxxxxxxx>
• Re: Memoy Leaks in RPM; Version, rpm-4.6.0
  • From: Panu Matilainen <pmatilai@xxxxxxxxxxxxxxx>
• Memoy Leaks in RPM; Version, rpm-4.6.0
  • From: Creative Innovative <innovative_c@xxxxxxxxx>
• Re: RPM library function for SLES 10Sp2
  • From: Panu Matilainen <pmatilai@xxxxxxxxxxxxxxx>
• RPM library function for SLES 10Sp2
  • From: shruthi srinivasalu <shruthisrinivasalu@xxxxxxxxxxx>
• RE: %post and sub packages
  • From: "Jason Pyeron" <jpyeron@xxxxxxxx>
• Re: %post and sub packages
  • From: Jos Vos <jos@xxxxxx>
• RE: %post and sub packages
  • From: "Jason Pyeron" <jpyeron@xxxxxxxx>
• %post and sub packages
  • From: "Jason Pyeron" <jpyeron@xxxxxxxx>
• SFWrpm on Solaris 10 is not able to relocate to new dir
  • From: "Ravi Desai" <Ravi.Desai@xxxxxxxxxxxxxx>
• Qs regarding rpmReadPackageFile, using rpm 4.6 version
  • From: Creative Innovative <innovative_c@xxxxxxxxx>
• rpm 4.6 version, --addsign doesnt seem to work
  • From: Creative Innovative <innovative_c@xxxxxxxxx>
• Discussion of %posttrans scriptlets and rpm transactions
  • From: "Shawn Starr" <sstarr@xxxxxxxxxxxx>
• Re: rpm -qf questions
  • From: James Antill <james@xxxxxxxxxxxxxxxxx>
• rpm -qf questions
  • From: Tan <tan.dalat@xxxxxxxxx>
• Re: Building rpm, x86_64 and i386 architecture, rpm --upgrade
  • From: "Michael A. Peters" <mpeters@xxxxxxx>
• Re: Building rpm, x86_64 and i386 architecture, rpm --upgrade
  • From: Greg_Swift@xxxxxxxxxxxxxxxxx
• Re: Building rpm, x86_64 and i386 architecture, rpm --upgrade
  • From: Mikolaj Kucharski <mikolaj@xxxxxxxxxxxxxx>
• Re: Qs on RPM Rollbacks
  • From: devzero2000 <pinto.elia@xxxxxxxxx>
• Re: Better way to this ?? Query database to xml
  • From: James Antill <james@xxxxxxxxxxxxxxxxx>
• Re: Better way to this ?? Query database to xml
  • From: Valery Reznic <valery_reznic@xxxxxxxxx>
• Better way to this ?? Query database to xml
  • From: "Michael A. Peters" <mpeters@xxxxxxx>
• Re: Qs on RPM Rollbacks
  • From: Florian Festi <ffesti@xxxxxxxxxx>
• Qs on RPM Rollbacks
  • From: Creative Innovative <innovative_c@xxxxxxxxx>
• Re: Unable to open /usr/lib/rpm/rpmrc for reading
  • From: Anurag Bhandari <anurag.bhd@xxxxxxxxx>
• Re: Unable to open /usr/lib/rpm/rpmrc for reading
  • From: James Antill <james@xxxxxxxxxxxxxxxxx>
• Unable to open /usr/lib/rpm/rpmrc for reading
  • From: Anurag Bhandari <anurag.bhd@xxxxxxxxx>
• Re: Create a RPM package that install other RPM package!
  • From: devzero2000 <pinto.elia@xxxxxxxxx>
• Looking for documentation on rpm macros and some suggestions
  • From: Ritesh Sood <baralachala@xxxxxxxxx>
• Re: Create Binary RPM from ZIP-File
  • From: devzero2000 <pinto.elia@xxxxxxxxx>
• upgrade and downgrade scripts
  • From: John Gardiner Myers <jgmyers@xxxxxxxxxxxxxx>
• broken link in the wiki
  • From: Felix Schwarz <felix.schwarz@xxxxxx>
• How can I examine build script?
  • From: Larry Dickson <ldickson@xxxxxxxxxxxx>
• Create Binary RPM from ZIP-File
  • From: Fred_aus_Sacka@xxxxxx
• Re: remove the specific dependencie
  • From: Jorge Pereira <jpereiran@xxxxxxxxx>
• remove the specific dependencie
  • From: Jorge Pereira <jpereiran@xxxxxxxxx>
• Re: odd package conflict behavior
  • From: Florian Festi <ffesti@xxxxxxxxxx>
• odd package conflict behavior
  • From: "Dave Peterson" <dave_peterson@xxxxxxxxxx>
• Re: or condition at BuildRequires
  • From: yersinia <yersinia.spiros@xxxxxxxxx>
• Re: Create a RPM package that install other RPM package!
  • From: devzero2000 <pinto.elia@xxxxxxxxx>
• Re: Create a RPM package that install other RPM package!
  • From: Derek Atkins <warlord@xxxxxxx>
• What the best way for verify if host is valid for install rpm?
  • From: Jorge Pereira <jpereiran@xxxxxxxxx>
• Re: or condition at BuildRequires
  • From: Greg_Swift@xxxxxxxxxxxxxxxxx
• Re: or condition at BuildRequires
  • From: Marten Lehmann <lehmann@xxxxxx>
• Re: or condition at BuildRequires
  • From: Greg_Swift@xxxxxxxxxxxxxxxxx
• Re: or condition at BuildRequires
  • From: Marten Lehmann <lehmann@xxxxxx>
• Re: or condition at BuildRequires
  • From: Florian Festi <ffesti@xxxxxxxxxx>
• or condition at BuildRequires
  • From: Marten Lehmann <lehmann@xxxxxx>
• Re: Create a RPM package that install other RPM package!
  • From: Jorge Pereira <jpereiran@xxxxxxxxx>
• Re: Create a RPM package that install other RPM package!
  • From: devzero2000 <pinto.elia@xxxxxxxxx>
• Re: Create a RPM package that install other RPM package!
  • From: Derek Atkins <warlord@xxxxxxx>
• Re: Create a RPM package that install other RPM package!
  • From: seth vidal <skvidal@xxxxxxxxxxxxxxxxx>
• Re: Create a RPM package that install other RPM package!
  • From: Jos Vos <jos@xxxxxx>
• Re: Create a RPM package that install other RPM package!
  • From: Derek Atkins <warlord@xxxxxxx>
• Re: Create a RPM package that install other RPM package!
  • From: devzero2000 <pinto.elia@xxxxxxxxx>
• Re: Create a RPM package that install other RPM package!
  • From: seth vidal <skvidal@xxxxxxxxxxxxxxxxx>
• Create a RPM package that install other RPM package!
  • From: Jorge Pereira <jpereiran@xxxxxxxxx>
• Re: rpm behavior at install
  • From: rpm@xxxxxxxxxxxx
• Re: Defines for detecting build OS?
  • From: devzero2000 <pinto.elia@xxxxxxxxx>
• Re: Defines for detecting build OS?
  • From: Matthew Pounsett <matt@xxxxxxxxxxxxx>
• Re: Defines for detecting build OS?
  • From: devzero2000 <pinto.elia@xxxxxxxxx>
• Re: Defines for detecting build OS?
  • From: Matthew Pounsett <matt@xxxxxxxxxxxxx>
• Re: rpm behavior at install
  • From: devzero2000 <pinto.elia@xxxxxxxxx>
• Re: Defines for detecting build OS?
  • From: Matthew Pounsett <matt@xxxxxxxxxxxxx>
• Re: Defines for detecting build OS?
  • From: Greg_Swift@xxxxxxxxxxxxxxxxx
• Re: Defines for detecting build OS?
  • From: Greg_Swift@xxxxxxxxxxxxxxxxx
• Re: Defines for detecting build OS?
  • From: devzero2000 <pinto.elia@xxxxxxxxx>
• Re: Defines for detecting build OS?
  • From: Greg_Swift@xxxxxxxxxxxxxxxxx
• rpm behavior at install
  • From: rpm@xxxxxxxxxxxx
• Defines for detecting build OS?
  • From: Matthew Pounsett <matt@xxxxxxxxxxxxx>
• Re: how to tst the "erase " functionality of an rpm
  • From: devzero2000 <pinto.elia@xxxxxxxxx>
• Re: how to tst the "erase " functionality of an rpm
  • From: Panu Matilainen <pmatilai@xxxxxxxxxxxxxxx>
• Re: how to tst the "erase " functionality of an rpm
  • From: devzero2000 <pinto.elia@xxxxxxxxx>
• how to tst the "erase " functionality of an rpm
  • From: "Jennis Pruett" <jennyp@xxxxxxxx>
• Install RPM into HPUX Servers
  • From: "Lo Mike - michlo" <Mike.Lo@xxxxxxxxxx>
• Re: question about package conflicts
  • From: Jeff Johnson <n3npq@xxxxxxx>
• Re: question about package conflicts
  • From: Florian Festi <ffesti@xxxxxxxxxx>
• RE: question about package conflicts
  • From: seth vidal <skvidal@xxxxxxxxxxxxxxxxx>
• RE: question about package conflicts
  • From: "Dave Peterson" <dave_peterson@xxxxxxxxxx>
• Re: First ever rpm, how are files extracted from the rpm and where do they go?
  • From: Ignacio Valdes <ivaldes@xxxxxxxxxx>
• Re: First ever rpm, how are files extracted from the rpm and where do they go?
  • From: Greg_Swift@xxxxxxxxxxxxxxxxx
• Re: First ever rpm, how are files extracted from the rpm and where do they go?
  • From: Ignacio Valdes <ivaldes@xxxxxxxxxx>
• Feature Highlight: Noarch Subpackages
  • From: Florian Festi <ffesti@xxxxxxxxxx>
• Re: First ever rpm, how are files extracted from the rpm and where do they go?
  • From: Paul Johnson <pauljohn32@xxxxxxxxx>
• First ever rpm, how are files extracted from the rpm and where do they go?
  • From: Ignacio Valdes <ivaldes@xxxxxxxxxx>
• RE: question about package conflicts
  • From: seth vidal <skvidal@xxxxxxxxxxxxxxxxx>
• RE: question about package conflicts
  • From: "Dave Peterson" <dave_peterson@xxxxxxxxxx>
• Re: question about package conflicts
  • From: seth vidal <skvidal@xxxxxxxxxxxxxxxxx>
• Re: question about package conflicts
  • From: Greg_Swift@xxxxxxxxxxxxxxxxx
• question about package conflicts
  • From: "Dave Peterson" <dave_peterson@xxxxxxxxxx>
• RE: Unsatisfied dependency of library included in package
  • From: Panu Matilainen <pmatilai@xxxxxxxxxx>
• RE: Unsatisfied dependency of library included in package
  • From: "Ho-Kuo Chan" <HChan@xxxxxxxxxxx>
• Re: Unsatisfied dependency of library included in package
  • From: Panu Matilainen <pmatilai@xxxxxxxxxxxxxxx>
• Re: What is $releasever
  • From: seth vidal <skvidal@xxxxxxxxxxxxxxxxx>
• Re: What is $releasever
  • From: Jonathan Ryshpan <jonrysh@xxxxxxxxxxx>
• Re: What is $releasever
  • From: Jos Vos <jos@xxxxxx>
• What is $releasever
  • From: Jonathan Ryshpan <jonrysh@xxxxxxxxxxx>
• Unsatisfied dependency of library included in package
  • From: "Ho-Kuo Chan" <HChan@xxxxxxxxxxx>
• Re: Changing the %Setup Macro
  • From: devzero2000 <pinto.elia@xxxxxxxxx>
• [PATCH] Typo in comment of header-py.c
  • From: Masatake YAMATO <yamato@xxxxxxxxxx>
• Changing the %Setup Macro
  • From: "Eric Aiken" <eric.aiken@xxxxxx>
• Re: rpm.spec in rpm-4.4.2.3
  • From: Panu Matilainen <pmatilai@xxxxxxxxxxxxxxx>
• Re: dist-upgrade: usage of rpm in pre-/postinstall scripts
  • From: devzero2000 <pinto.elia@xxxxxxxxx>
• Re: dist-upgrade: usage of rpm in pre-/postinstall scripts
  • From: "Alexander 'Leo' Bergolth" <leo@xxxxxxxxxxxxxxxxxxxx>
• Re: dist-upgrade: usage of rpm in pre-/postinstall scripts
  • From: devzero2000 <pinto.elia@xxxxxxxxx>
• rpm.spec in rpm-4.4.2.3
  • From: Chris Osborn <fozztexx@xxxxxxxxxxxx>
• Re: installing an rpm from another rpm's %post script
  • From: devzero2000 <pinto.elia@xxxxxxxxx>
• Re: dist-upgrade: usage of rpm in pre-/postinstall scripts
  • From: Panu Matilainen <pmatilai@xxxxxxxxxxxxxxx>
• Re: dist-upgrade: usage of rpm in pre-/postinstall scripts
  • From: devzero2000 <pinto.elia@xxxxxxxxx>
• Re: What does "%if 0%{?..." mean
  • From: Jeff Johnson <n3npq@xxxxxxx>
• Dependency fail for libjvm.so
  • From: "Shaer, Ofira" <OShaer@xxxxxxx>
• Re: Keeping tar permissions when building an rpm.
  • From: Florian Festi <ffesti@xxxxxxxxxx>
• dist-upgrade: usage of rpm in pre-/postinstall scripts
  • From: "Alexander 'Leo' Bergolth" <leo@xxxxxxxxxxxxxxxxxxxx>
• Re: installing an rpm from another rpm's %post script
  • From: Don Harper <duck@xxxxxxxxxxxx>
• Keeping tar permissions when building an rpm.
  • From: "Jennis Pruett" <jennyp@xxxxxxxx>
• creating a python 2.5.4 rpm
  • From: Daniel Bahena <daniel.bahena@xxxxxxxxx>
• Re: installing an rpm from another rpm's %post script
  • From: Derek Atkins <warlord@xxxxxxx>
• Re: installing an rpm from another rpm's %post script
  • From: Florian Festi <ffesti@xxxxxxxxxx>
• installing an rpm from another rpm's %post script
  • From: Derek Atkins <warlord@xxxxxxx>
• Re: Preventing the striping of symbols when packaging pre-existing binaries [ WAS: Re: how to disable rpmbuild from stripping the debug information from binaries?]
  • From: Greg_Swift@xxxxxxxxxxxxxxxxx
• Re: Preventing the striping of symbols when packaging pre-existing binaries [ WAS: Re: how to disable rpmbuild from stripping the debug information from binaries?]
  • From: Dotan Barak <dotanba@xxxxxxxxx>
• Preventing the striping of symbols when packaging pre-existing binaries [ WAS: Re: how to disable rpmbuild from stripping the debug information from binaries?]
  • From: Greg_Swift@xxxxxxxxxxxxxxxxx
• Re: how to disable rpmbuild from stripping the debug information from binaries?
  • From: Dotan Barak <dotanba@xxxxxxxxx>
• Re: spec file documentation
  • From: seth vidal <skvidal@xxxxxxxxxxxxxxxxx>
• Re: spec file documentation
  • From: Jonathan Ryshpan <jonrysh@xxxxxxxxxxx>
• Re: spec file documentation
  • From: seth vidal <skvidal@xxxxxxxxxxxxxxxxx>
• spec file documentation
  • From: Jonathan Ryshpan <jonrysh@xxxxxxxxxxx>
• Re: how to disable rpmbuild from stripping the debug information from binaries?
  • From: Greg_Swift@xxxxxxxxxxxxxxxxx