Linux RAID Storage Date Index

Thread Index

RE: raid0 and iscsi
- From: jshankar <jshankar@xxxxxxxxxxxxxxxx>
4*300GB SW-RAID5 - bad idea?
- From: Hermann Himmelbauer <dusty@xxxxxxxxxxxxxxxxxxxx>
Re: Swap on RAID1?
- From: Thomas Horsten <thomas@xxxxxxxxxxx>
Re: Linux drivers for ICH5R (RAID1) and Promise PDC20378, Performance
- From: Steven Dake <sdake@xxxxxxxxxx>
Swap on RAID1?
- From: Hermann Himmelbauer <dusty@xxxxxxxxxxxxxxxxxxxx>
Linux drivers for ICH5R (RAID1) and Promise PDC20378, Performance
- From: Hermann Himmelbauer <dusty@xxxxxxxxxxxxxxxxxxxx>
Re: Driver for BIOS-based software RAIDs
- From: Thomas Horsten <thomas@xxxxxxxxxxx>
Re: raid1 critical sections not protected in 2.4.x?
- From: Steven Dake <sdake@xxxxxxxxxx>
Re: Driver for BIOS-based software RAIDs
- From: Lars Marowsky-Bree <lmb@xxxxxxx>
Re: missing superblock on RAID5
- From: Victor <linux-raid@xxxxxxxxx>
Re: missing superblock on RAID5
- From: rob <rob@xxxxxxxxxxxxxxxxx>
Re: Driver for BIOS-based software RAIDs
- From: Thomas Horsten <thomas@xxxxxxxxxxx>
Re: Driver for BIOS-based software RAIDs
- From: Thomas Horsten <thomas@xxxxxxxxxxx>
Re: Driver for BIOS-based software RAIDs
- From: Lars Marowsky-Bree <lmb@xxxxxxx>
Re: Driver for BIOS-based software RAIDs
- From: "Kevin P. Fleming" <kpfleming@xxxxxxxxxxxxxxxxxxxx>
Driver for BIOS-based software RAIDs
- From: Thomas Horsten <thomas@xxxxxxxxxxx>
Re: missing superblock on RAID5
- From: Victor <linux-raid@xxxxxxxxx>
Re: recovery of hosed raid5 array
- From: dean gaudet <dean-list-linux-raid@xxxxxxxxxx>
missing superblock on RAID5
- From: Victor <linux-raid@xxxxxxxxx>
recovery question?
- From: Scott Kopel <skopel@xxxxxxxxxxxxxxx>
Re: recovery of hosed raid5 array
- From: Dragan Simic <dsimic@xxxxxxxxxxxx>
Re: raid0 and iscsi
- From: rob <rob@xxxxxxxxxxxxxxxxx>
raid0 and iscsi
- From: Jayshankar Nair <jshankar@xxxxxxxxxxxxxxxx>
Re: raid resync
- From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
Re: recovery of hosed raid5 array
- From: dean gaudet <dean-list-linux-raid@xxxxxxxxxx>
Re: recovery of hosed raid5 array
- From: Jason Lunz <lunz@xxxxxxxxxxxx>
Re: recovery of hosed raid5 array
- From: dean gaudet <dean-list-linux-raid@xxxxxxxxxx>
speed_limit_min probs, thoughts
- From: Duke Ionescu <duke@xxxxxxxxxx>
Re: recovery of hosed raid5 array
- From: Jason Lunz <lunz@xxxxxxxxxxxx>
Re: recovery of hosed raid5 array
- From: rob <rob@xxxxxxxxxxxxxxxxx>
Re: recovery of hosed raid5 array
- From: linux-raid@xxxxxxx
recovery of hosed raid5 array
- From: Jason Lunz <lunz@xxxxxxxxxxxx>
Re: raid1 critical sections not protected in 2.4.x?
- From: Lars Marowsky-Bree <lmb@xxxxxxx>
Re: raid0 + raid1 question
- From: "Kevin P. Fleming" <kpfleming@xxxxxxxxxxxxxxxxxxxx>
interesting md problem
- From: Maurice Hilarius <maurice@xxxxxxxxxxxx>
Re: raid0 + raid1 question
- From: anthony mayes <anmayes@xxxxxxxx>
Re: raid0 + raid1 question
- From: "Rechenberg, Andrew" <ARechenberg@xxxxxxxxxxxxxxxxxxxxxxxxx>
raid1 critical sections not protected in 2.4.x?
- From: Steven Dake <sdake@xxxxxxxxxx>
Re: RAID1-Device won't survive reboot
- From: rob <rob@xxxxxxxxxxxxxxxxx>
Antwort: Re: RAID1-Device won't survive reboot
- From: alexander.weber@xxxxxx
Re: RAID1-Device won't survive reboot
- From: Thomas Steudten <alpha@xxxxxxxxxxxx>
Re: raid0 + raid1 question
- From: Lars Marowsky-Bree <lmb@xxxxxxx>
Re: RAID1-Device won't survive reboot
- From: rob <rob@xxxxxxxxxxxxxxxxx>
raid resync
- From: "Bo Moon" <bo@xxxxxxxxxxxxxxxxxxxxxx>
raid0 + raid1 question
- From: anthony mayes <anmayes@xxxxxxxx>
RAID1-Device won't survive reboot
- From: alexander.weber@xxxxxx
mdadm --assemble --scan hassles....
- From: Hendrik Visage <hvisage@xxxxxxxxxxxxxx>
Re: possible to use 1 drive as hot failover for 2 raid1's?
- From: Luca Berra <bluca@xxxxxxxxxx>
Re: possible to use 1 drive as hot failover for 2 raid1's?
- From: Holger Kiehl <Holger.Kiehl@xxxxxx>
Re: mounting /dev/hdax and xfs problems
- From: Lars Marowsky-Bree <lmb@xxxxxxx>
Re: mounting /dev/hdax and xfs problems
- From: Nerijus Baliunas <nerijus@xxxxxxxxxxxxxxxxxxxxx>
Re: possible to use 1 drive as hot failover for 2 raid1's?
- From: Lars Marowsky-Bree <lmb@xxxxxxx>
possible to use 1 drive as hot failover for 2 raid1's?
- From: Dan Hollis <goemon@xxxxxxxxx>
mounting /dev/hdax and xfs problems
- From: Nerijus Baliunas <nerijus@xxxxxxxxxxxxxxxxxxxxx>
raid5 failed "Operation continuing on 4 devices" (out of 8)
- From: Timo Boettcher <spida@xxxxxxx>
Weird Interrupt Problem..
- From: Gordon Henderson <gordon@xxxxxxxxxx>
parallel resync
- From: Luca Berra <bluca@xxxxxxxxxx>
Faulty raid5.
- From: afu@xxxxxxxxxxxxxxx
Re: Recovering files on a raid...
- From: seth vidal <skvidal@xxxxxxxxxxxx>
Recovering files on a raid...
- From: Loïc Paillotin <loic.paillotin@xxxxxxxxxxxxxx>
Re: How robust is MD/multipath????
- From: "Doug Griswold" <griswld@xxxxxxxxxx>
Re: How robust is MD/multipath????
- From: "Doug Griswold" <griswld@xxxxxxxxxx>
Re: How robust is MD/multipath????
- From: Lars Marowsky-Bree <lmb@xxxxxxx>
Re: How robust is MD/multipath????
- From: Lars Marowsky-Bree <lmb@xxxxxxx>
How robust is MD/multipath????
- From: "Doug Griswold" <griswld@xxxxxxxxxx>
Re: resync on every raidstart
- From: spam@xxxxxxxxxxxxxxxxxxxx (Dick Streefland)
Patch for raidtools-1.00.3 compile error under gcc 3.3.1
- From: achurch@xxxxxxxxxxx (Andrew Church)
Re: resync on every raidstart
- From: spam@xxxxxxxxxxxxxxxxxxxx (Dick Streefland)
Re: [PATCH] fixes defect with kernel BUG using multipath on 2.6.0-test5
- From: Jens Axboe <axboe@xxxxxxx>
[PATCH] fixes defect with kernel BUG using multipath on 2.6.0-test5
- From: Steven Dake <sdake@xxxxxxxxxx>
Expert opinion on "Recovering from a multiple disk failure"
- From: "Christof Soehngen" <christof@xxxxxxxxxxxx>
Re: Raid1 recovery problem - need help!
- From: "Tomi Orava" <tomimo+linux-raid@xxxxxxxxxxxxxxxxxx>
Re: Raid1 recovery problem - need help!
- From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
Re: Raid1 recovery problem - need help!
- From: "Tomi Orava" <tomimo+linux-raid@xxxxxxxxxxxxxxxxxx>
Re: Raid1 recovery problem - need help!
- From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
Re: Raid1 recovery problem - need help!
- From: "Tomi Orava" <tomimo+linux-raid@xxxxxxxxxxxxxxxxxx>
Re: Raid1 recovery problem - need help!
- From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
Raid1 recovery problem - need help!
- From: "Tomi Orava" <tomimo+linux-raid@xxxxxxxxxxxxxxxxxx>
Oops, panic with RAID5, 2.6.0-test5-mm4
- From: Torrey Hoffman <thoffman@xxxxxxxxx>
Re: no resync after hotadd
- From: Lars Marowsky-Bree <lmb@xxxxxxx>
raid5 algorithm
- From: Loris <loris@xxxxxxxxxxxxxxx>
[no subject]
- From: Loris <loris@xxxxxxxxxxxxxxx>
RE: no resync after hotadd
- From: "Cress, Andrew R" <andrew.r.cress@xxxxxxxxx>
Software Raid: raidhotadd No Resyncing Array
- From: "kaltar" <kaltar@xxxxxxxxxx>
no resync after hotadd
- From: "Cress, Andrew R" <andrew.r.cress@xxxxxxxxx>
BUG: raid0_make_request bug in kernel 2.6.0-test5-bk10
- From: Andreas Feldmann <aef@xxxxxxxxxxxx>
Re: RAID1: Disks alternating on reads
- From: Juri Haberland <list-linux.raid@xxxxxxxxxxx>
Re: RAID1: Disks alternating on reads
- From: Juri Haberland <list-linux.raid@xxxxxxxxxxx>
kernel 2.6 hardware RAID
- From: Kim "Højgaard-Hansen" <hi_fibrian@xxxxxxxxx>
[fixes] Re: Locking bugs in 2.4 md.c
- From: Lars Marowsky-Bree <lmb@xxxxxxx>
softraid5 disk order check
- From: "Loris-Guillaume Minoia" <miguillo@xxxxxxxxxxx>
Re: resync on every raidstart
- From: dick.streefland@xxxxxxxxx (Dick Streefland)
RE: RAID1: Disks alternating on reads
- From: "Bailey, Scott" <scott.bailey@xxxxxxx>
Re: Locking bugs in 2.4 md.c
- From: Lars Marowsky-Bree <lmb@xxxxxxx>
Re: RAID1: Disks alternating on reads
- From: Lars Marowsky-Bree <lmb@xxxxxxx>
Re: resync on every raidstart
- From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
Re: moving softraid5 from a computer to another
- From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
moving softraid5 from a computer to another
- From: "Loris-Guillaume Minoia" <miguillo@xxxxxxxxxxx>
[PATCH] md - 3 of 3 - change 'or' to 'plus' in raid1
- From: NeilBrown <neilb@xxxxxxxxxxxxxxx>
[PATCH] md - 1 of 3 - Don't setup make_request_fn for md array until *after* it has been start.
- From: NeilBrown <neilb@xxxxxxxxxxxxxxx>
[PATCH] md - 2 of 3 - MODULE_ALIAS for md
- From: NeilBrown <neilb@xxxxxxxxxxxxxxx>
Re: RAID1: Disks alternating on reads
- From: "Andrew Herdman" <andrew@xxxxxxxxx>
Re: RAID1: Disks alternating on reads
- From: Juri Haberland <list-linux.raid@xxxxxxxxxxx>
Re: RAID1: Disks alternating on reads
- From: Catalin BOIE <util@xxxxxxxxxxxxxxx>
Re: Locking bugs in 2.4 md.c
- From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
Initrd, Software Raid and Failure to Mount Root FS
- From: Darryl Barlow <darrylb@xxxxxxxxxxxxxx>
resync on every raidstart
- From: dick.streefland@xxxxxxxxx (Dick Streefland)
RAID1: Disks alternating on reads
- From: "Andrew Herdman" <andrew@xxxxxxxxx>
Re: looking for cheap(er) RAID
- From: Gordon Henderson <gordon@xxxxxxxxxx>
Ext3 inconsistencies again
- From: Vladimir Trebicky <trebicky@xxxxxxxx>
looking for cheap(er) RAID
- From: linux-raid@xxxxxxx
Re: Locking bugs in 2.4 md.c
- From: Lars Marowsky-Bree <lmb@xxxxxxx>
Re: Locking bugs in 2.4 md.c
- From: Lars Marowsky-Bree <lmb@xxxxxxx>
Re: Locking bugs in 2.4 md.c
- From: Lars Marowsky-Bree <lmb@xxxxxxx>
Re: Locking bugs in 2.4 md.c
- From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
Locking bugs in 2.4 md.c
- From: Lars Marowsky-Bree <lmb@xxxxxxx>
Re: md multipath and failover
- From: Lars Marowsky-Bree <lmb@xxxxxxx>
Bug in the raidtools-1.00.3 package
- From: Suresh Grandhi <Sureshg@xxxxxxx>
RAID5 questions
- From: Don Jessup <donj@xxxxxxxxx>
Re: Software Raid Autodetection Problem
- From: Darryl Barlow <darrylb@xxxxxxxxxxxxxx>
RAID auto start issue
- From: Nick DeClario <nick@xxxxxxxxxxxxxxxxxxx>
Supporting Promise RAID5?
- From: Jeff Garzik <jgarzik@xxxxxxxxx>
Re: Software Raid Autodetection Problem
- From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
Re: Software Raid Autodetection Problem
- From: Darryl Barlow <darrylb@xxxxxxxxxxxxxx>
Re: Software Raid Autodetection Problem
- From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
Re: raidreconf error
- From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
Re: help! how do I mark spare drive as active without reconstruct?
- From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
Re: recovery not starting: wrong superblock? multipath instead of raid1 !? (long!)
- From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
Re: Does md work in 2.6 yet?
- From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
Re: a couple of mdadm questions
- From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
Re: bugs in md.c
- From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
Re: does ext3 trample on mkraid superblocks and visa-versa?
- From: "Eric Wood" <eric@xxxxxxxxxxxxx>
Re: md multipath and failover
- From: "Doug Griswold" <griswld@xxxxxxxxxx>
Re: Converting a non-RAID RedHat System to run on Software RAID
- From: "Eric Wood" <eric@xxxxxxxxxxxxx>
Re: md multipath and failover
- From: "Doug Griswold" <griswld@xxxxxxxxxx>
raidreconf error
- From: "Cristian Banciu" <Cristian.Banciu@xxxxxxxxxx>
raidreconf eror
- From: "Cristian Banciu" <Cristian.Banciu@xxxxxxxxxx>
resize2fs woes...
- From: "akshaysalkar" <akshaysalkar@xxxxxxxxxxxxxx>
Re: md multipath and failover
- From: Lars Marowsky-Bree <lmb@xxxxxxx>
help! how do I mark spare drive as active without reconstruct?
- From: Bill Welch <billw@xxxxxxxxxxxxxx>
md multipath and failover
- From: "Doug Griswold" <griswld@xxxxxxxxxx>
Re: does ext3 trample on mkraid superblocks and visa-versa?
- From: dean gaudet <dean-list-linux-raid@xxxxxxxxxx>
does ext3 trample on mkraid superblocks and visa-versa?
- From: "Eric Wood" <eric@xxxxxxxxxxxxx>
Re: Benchmarks comparing 3ware 7410 RAID5 to Linux md
- From: Joshua Baker-LePain <jlb17@xxxxxxxx>
Re: Converting a non-RAID RedHat System to run on Software RAID
- From: "Bill Rugolsky Jr." <brugolsky@xxxxxxxxxxxxxxxxxxxxxxxxx>
Software Raid Autodetection Problem
- From: Darryl Barlow <darrylb@xxxxxxxxxxxxxx>
RE: Converting a non-RAID RedHat System to run on Software RAID
- From: "Cress, Andrew R" <andrew.r.cress@xxxxxxxxx>
Converting a non-RAID RedHat System to run on Software RAID
- From: "Eric Wood" <eric@xxxxxxxxxxxxx>
md multipath w/ 2 hba's
- From: "Doug Griswold" <griswld@xxxxxxxxxx>
recovery not starting: wrong superblock? multipath instead of raid1 !? (long!)
- From: Richard Ems <r.ems@xxxxxxx>
Does md work in 2.6 yet?
- From: linux@xxxxxxxxxxx
Re: bugs in md.c
- From: Alessandro Bono <a.bono@xxxxxxxxx>
Re: Benchmarks comparing 3ware 7410 RAID5 to Linux md
- From: Aaron Lehmann <aaronl@xxxxxxxxxxx>
Re: Benchmarks comparing 3ware 7410 RAID5 to Linux md
- From: Kanoa Withington <kanoa@xxxxxxxxxxxxxxx>
Re: Benchmarks comparing 3ware 7410 RAID5 to Linux md
- From: dean gaudet <dean-list-linux-raid@xxxxxxxxxx>
Re: Benchmarks comparing 3ware 7410 RAID5 to Linux md
- From: "Peter L. Ashford" <ashford@xxxxxxxx>
Benchmarks comparing 3ware 7410 RAID5 to Linux md
- From: Aaron Lehmann <aaronl@xxxxxxxxxxx>
Re: a couple of mdadm questions
- From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
bugs in md.c
- From: Alessandro Bono <a.bono@xxxxxxxxx>
Re: a couple of mdadm questions
- From: Luca Berra <bluca@xxxxxxxxxx>
Re: a couple of mdadm questions
- From: seth vidal <skvidal@xxxxxxxxxxxx>
Intel D875PBZ RAID 0 - Help with Install
- From: "Paul Hendricksen" <paul.hendricksen@xxxxxxxxxxxxx>
Re: a couple of mdadm questions
- From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
Re: md: bug in file md.c, line 1440 (2.4.22)
- From: Andre Tomt <andre@xxxxxxxx>
a couple of mdadm questions
- From: seth vidal <skvidal@xxxxxxxxxxxx>
HOWTO: mark spare drive as active without reconstruct
- From: Bill Welch <bill@xxxxxxxxxxx>
promise reconstruction problem raid1
- From: Paul <ocran@xxxxxxx>
2.4.22 + RAID 1 + SATA + 2 disks => no maximum speed
- From: Catalin BOIE <util@xxxxxxxxxxxxxxx>
Re: raid0 to raid1
- From: "pg" <pg@xxxxxxxxxxxxx>
Re: Minor RAID-1 oddity... any way to fix?
- From: linux@xxxxxxxxxxx
Re: Minor RAID-1 oddity... any way to fix?
- From: Paul Clements <Paul.Clements@xxxxxxxxxxxx>
Minor RAID-1 oddity... any way to fix?
- From: linux@xxxxxxxxxxx
Re: raid0 to raid1
- From: Steven Dake <sdake@xxxxxxxxxx>
Re: RAID reconstruction problems
- From: Bernd Schubert <bernd-schubert@xxxxxx>
Re: Problem converting raid-5 array from 2.2.17 into 2.4.22
- From: "John Doe" <public_address_911@xxxxxxxxxxx>
Re: Problem converting raid-5 array from 2.2.17 into 2.4.22
- From: "John Doe" <public_address_911@xxxxxxxxxxx>
Re: md: bug in file md.c, line 1440 (2.4.22)
- From: Lars Marowsky-Bree <lmb@xxxxxxx>
raid0 to raid1
- From: "pg" <pg@xxxxxxxxxxxxx>
Re: RAID reconstruction problems
- From: Michael Welsh Duggan <mwd@xxxxxxxx>
Re: md: bug in file md.c, line 1440 (2.4.22)
- From: Mike Fedyk <mfedyk@xxxxxxxxxxxxx>
Re: [PATCH 2.6] md: persistent (file-backed) bitmap and asyncwrites
- From: Paul Clements <Paul.Clements@xxxxxxxxxxxx>
Re: md: bug in file md.c, line 1440 (2.4.22)
- From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
Re: Problem converting raid-5 array from 2.2.17 into 2.4.22
- From: "John Doe" <public_address_911@xxxxxxxxxxx>
Re: Problem converting raid-5 array from 2.2.17 into 2.4.22
- From: "John Doe" <public_address_911@xxxxxxxxxxx>
Problem converting raid-5 array from 2.2.17 into 2.4.22
- From: "John Doe" <public_address_911@xxxxxxxxxxx>
Re: power saving..
- From: Gordon Henderson <gordon@xxxxxxxxxx>
Re: RAID reconstruction problems
- From: Bernd Schubert <bernd-schubert@xxxxxx>
Re: RAID reconstruction problems
- From: "Donghui Wen" <dhwen@xxxxxxxxxxxxxxxxxxx>
RAID reconstruction problems
- From: Michael Welsh Duggan <md5i@xxxxxxxxxx>
IDE Performance issues
- From: "Theepan" <tornado@xxxxxxxxxxxxxxxxxxxx>
Re: [PATCH 2.6] md: persistent (file-backed) bitmap and async writes
- From: Steven Dake <sdake@xxxxxxxxxx>
[PATCH 2.6] md: persistent (file-backed) bitmap and async writes
- From: Paul Clements <Paul.Clements@xxxxxxxxxxxx>
2.422 + RAID 1 + SATA + 2 disks => no maximum speed
- From: Catalin BOIE <util@xxxxxxxxxxxxxxx>
Re: Consensus?...
- From: "Peter L. Ashford" <ashford@xxxxxxxx>
RE: Consensus?...
- From: "Dhaval Patel" <dhaval@xxxxxxxx>
RE: Consensus?...
- From: "Rechenberg, Andrew" <ARechenberg@xxxxxxxxxxxxxxxxxxxxxxxxx>
Consensus?...
- From: Bob Hillegas <bobhillegas@xxxxxxxxxxxxxx>
Re: 2.6.0-test{1,2,3} kernels + software raid 0 + xfs broken?
- From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
PROBLEM: root mounted read only on kernel 2.6.0-test4-bk2
- From: Andreas Feldmann <aef@xxxxxxxxxxxx>
Re: RAID recovery question
- From: Eric Rumer <eric.rumer@xxxxxxxxxx>
Re: 2.6.0-test{1,2,3,4} kernels + software raid 0 + xfs broken?
- From: Florian Schanda <ma1flfs@xxxxxxxxxx>
Re: RAID recovery question
- From: mjstumpf <mjstumpf@xxxxxxxxx>
Re: 2.6.0-test{1,2,3} kernels + software raid 0 + xfs broken?
- From: Florian Schanda <ma1flfs@xxxxxxxxxx>
RE: Power Saving possible ? (fwd)
- From: "raidlist" <raidlist@xxxxxxxxxxx>
RAID recovery question
- From: Eric Rumer <eric.rumer@xxxxxxxxxx>
Re: interesting.. 3 ultra100's in a single machine.
- From: Steven Dake <sdake@xxxxxxxxxx>
interesting.. 3 ultra100's in a single machine.
- From: mjstumpf <mjstumpf@xxxxxxxxx>
Re: sorta OT: vibration dampening, maximum promise cards?
- From: "Peter L. Ashford" <ashford@xxxxxxxx>
Re: sorta OT: vibration dampening, maximum promise cards?
- From: Kanoa Withington <kanoa@xxxxxxxxxxxxxxx>
Re: sorta OT: vibration dampening, maximum promise cards?
- From: "Peter L. Ashford" <ashford@xxxxxxxx>
Re: question regarding a raid-1 set
- From: Paul Clements <Paul.Clements@xxxxxxxxxxxx>
Re: question regarding a raid-1 set
- From: Jeroen Baten <jbaten@xxxxxxx>
Re: question regarding a raid-1 set
- From: Paul Clements <Paul.Clements@xxxxxxxxxxxx>
Re: Power Saving possible ?
- From: mjstumpf <mjstumpf@xxxxxxxxx>
sorta OT: vibration dampening, maximum promise cards?
- From: mjstumpf <mjstumpf@xxxxxxxxx>
Power Saving possible ?
- From: "raidlist" <raidlist@xxxxxxxxxxx>
Re: question regarding a raid-1 set
- From: "Martin K. Petersen" <mkp@xxxxxxx>
question regarding a raid-1 set
- From: Jeroen Baten <jbaten@xxxxxxx>
convert raid0 to raid 1
- From: "pg" <pg@xxxxxxxxxxxxx>
[PATCH] md - 1 of 4 - Fix module ref counting for md.
- From: NeilBrown <neilb@xxxxxxxxxxxxxxx>
[PATCH] md - 2 of 4 - Honour the read-ahead for for reads in raid5.
- From: NeilBrown <neilb@xxxxxxxxxxxxxxx>
[PATCH] md - 4 of 4 - Fix md superblock incompatabilities with 2.4 kernels.
- From: NeilBrown <neilb@xxxxxxxxxxxxxxx>
[PATCH] md - 3 of 4 - Set max_sectors for raid0 only, not for all raid levels.
- From: NeilBrown <neilb@xxxxxxxxxxxxxxx>
Re: power saving..
- From: Mike Dresser <mdresser_l@xxxxxxxxxxxxxxxxxx>
Re: power saving..
- From: "Peter L. Ashford" <ashford@xxxxxxxx>
power saving..
- From: mjstumpf <mjstumpf@xxxxxxxxx>
Re: raid partition crash
- From: Mads Peter Bach <mpb@xxxxxxxxxx>
raid partition crash
- From: "Mikael Chambon" <raid-ml@xxxxxxxxxx>
2.6.0-test{1,2,3} kernels + software raid 0 + xfs broken?
- From: Florian Schanda <ma1flfs@xxxxxxxxxx>
RAID detection
- From: Eric BENARD / Free <ebenard@xxxxxxx>
Re: [PATCH 2.6.0-test3] avoid raid1 resync abort
- From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
Re: RAID5 rebuild difficulties
- From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
Re: raid question
- From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
Re: mr. brown: point me to text on RAID
- From: berk walker <berk.walker@xxxxxxxxxxx>
[PATCH 2.6.0-test3] avoid raid1 resync abort
- From: Paul Clements <Paul.Clements@xxxxxxxxxxxx>
RAID5 rebuild difficulties
- From: Eric BENARD / Free <ebenard@xxxxxxx>
raid-0 question
- From: jshankar <jshankar@xxxxxxxxxxxxxxxx>
Re: pdc20276 /dev/ataraid/disc2 problem
- From: Nix <nix@xxxxxxxxx>
Re: Ext3 inconsistencies
- From: Gordon Henderson <gordon@xxxxxxxxxx>
Ext3 inconsistencies
- From: Vladimir Trebicky <trebicky@xxxxxxxx>
pdc20276 /dev/ataraid/disc2 problem
- From: Nix <nix@xxxxxxxxx>
raid question
- From: jshankar <jshankar@xxxxxxxxxxxxxxxx>
Replacing failed disk in RAID1
- From: Dave Wreski <dave@xxxxxxxxxxxxxxxxxxx>
raidreconf success raid0 -> raid5, 60051568kB
- From: Jeff Baitis <baitisj@xxxxxxxxxxxxx>
Re: mr. brown: point me to text on RAID
- From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
mr. brown: point me to text on RAID
- From: berk walker <berk.walker@xxxxxxxxxxx>
Re: mkraid-problems
- From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
mkraid-problems
- From: Ekkehard Lissner <ekkehard@xxxxxxxxxxx>
[PATCH] md - 1 of 2 - Fix "bio too big" problem with md
- From: NeilBrown <neilb@xxxxxxxxxxxxxxx>
[PATCH] md - 2 of 2 - Fix module ref counting for md.
- From: NeilBrown <neilb@xxxxxxxxxxxxxxx>
Re: raid5 on 2.4.21 and reconstruction problem
- From: Paul Clements <Paul.Clements@xxxxxxxxxxxx>
Re: raid5 on 2.4.21 and reconstruction problem
- From: Arkadiusz Miskiewicz <arekm@xxxxxxxxxxxxx>
Re: raid5 on 2.4.21 and reconstruction problem
- From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
Help: any mdadm based cgi perl for webmin
- From: "Bo Moon" <bo@xxxxxxxxxxxxxxxxxxxxxx>
Re: RAID5 recovery after disk-change
- From: Paul Clements <Paul.Clements@xxxxxxxxxxxx>
Re: RAID5 recovery after disk-change
- From: Simon Frettloeh <sifr@xxxxxxxxxxxxxxxxxxxxx>
RAID5 recovery after disk-change
- From: Simon Frettloeh <sifr@xxxxxxxxxxxxxxxxxxxxx>
Raid 1 / Multiple Reboot Problem
- From: Derek Yeung <dky@xxxxxxxxxxxxxxxx>
Re: raid5 on 2.4.21 and reconstruction problem
- From: Arkadiusz Miskiewicz <arekm@xxxxxxxxxxxxx>
Any mdadm based cgi perl script for webmin?
- From: "Bo Moon" <bo@xxxxxxxxxxxxxxxxxxxxxx>
Re: Raid Q
- From: Paul Clements <Paul.Clements@xxxxxxxxxxxx>
Re: raid5 on 2.4.21 and reconstruction problem
- From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
raid5 not responding (LONG)
- From: "Claudio Lapidus" <clapidus@xxxxxxxxxxx>
Re: raid5 on 2.4.21 and reconstruction problem
- From: Arkadiusz Miskiewicz <arekm@xxxxxxxxxxxxx>
Re: smart raid1 reads?
- From: "Michael T. Babcock" <mbabcock@xxxxxxxxxxxxxx>
Re: smart raid1 reads?
- From: "Michael T. Babcock" <mbabcock@xxxxxxxxxxxxxx>
very stupid question about dpt_i2o
- From: "Alexandru N. Barloiu" <slak@xxxxxxx>
Raid Q
- From: "Jose Nathaniel G. Nengasca" <admin@xxxxxxxxxxxxxx>
[PATCH] Disable raid5 handling of read-ahead
- From: NeilBrown <neilb@xxxxxxxxxxxxxxx>
Re: faulty mdstat
- From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
Re: raid5 on 2.4.21 and reconstruction problem
- From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
faulty mdstat
- From: Eric BENARD / Free <ebenard@xxxxxxx>
raid5 on 2.4.21 and reconstruction problem
- From: Arkadiusz Miskiewicz <arekm@xxxxxxxxxxxxx>
Re: Summary of the Multi-Path BOF at OLS and future directions
- From: Lars Marowsky-Bree <lmb@xxxxxxx>
Re: Summary of the Multi-Path BOF at OLS and future directions
- From: Steven Dake <sdake@xxxxxxxxxx>
Re: RAID-1 does not rebuild after hot-add
- From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
raid-1 boot with raid-5 system
- From: "taddis" <taddis@xxxxxxxxxx>
Re: RAID-1 does not rebuild after hot-add
- From: David Chow <davidchow@xxxxxxxxxxxxxxxx>
Re: [2.4.21] Small patch to quieten md.c boot messages
- From: Mark ZZZ Smith <markzzzsmith@xxxxxxxxxxxx>
Re: RAID-1 does not rebuild after hot-add
- From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
Re: Help!About MD on shared storage.
- From: David Chow <davidchow@xxxxxxxxxxxxxxxx>
Re: RAID-1 does not rebuild after hot-add
- From: David Chow <davidchow@xxxxxxxxxxxxxxxx>
Re: [2.4.21] Small patch to quieten md.c boot messages
- From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
Re: Faulty disk detection code: looking to tweak it for network devices
- From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
Re: RAID-1 does not rebuild after hot-add
- From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
Faulty disk detection code: looking to tweak it for network devices
- From: "Ryan P. Joseph" <rjoseph@xxxxxxxxxxxx>
Re: reconstructing raid5 with bad sectors
- From: dean gaudet <dean-list-linux-raid@xxxxxxxxxx>
Re: reconstructing raid5 with bad sectors
- From: Ross Vandegrift <ross@xxxxxxxxxxxxxxxx>
Re: RAID-1 does not rebuild after hot-add
- From: Paul Clements <Paul.Clements@xxxxxxxxxxxx>
Re: Help!About MD on shared storage.
- From: Steven Dake <sdake@xxxxxxxxxx>
reconstructing raid5 with bad sectors
- From: dean gaudet <dean-list-linux-raid@xxxxxxxxxx>
Re: RAID-1 does not rebuild after hot-add
- From: Ross Vandegrift <ross@xxxxxxxxxxxxxxxx>
Re: RAID-1 does not rebuild after hot-add
- From: David Chow <davidchow@xxxxxxxxxxxxxxxx>
Re: RAID-1 does not rebuild after hot-add
- From: David Chow <davidchow@xxxxxxxxxxxxxxxx>
Re: RAID-1 does not rebuild after hot-add
- From: David Chow <davidchow@xxxxxxxxxxxxxxxx>
Re: RAID-1 does not rebuild after hot-add
- From: Andrew Rechenberg <arechenberg@xxxxxxxxxxxx>
Re: RAID-1 does not rebuild after hot-add
- From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
Re: RAID-1 does not rebuild after hot-add
- From: Stephen Lee <splee@xxxxxxxxxx>
RAID-1 does not rebuild after hot-add
- From: David Chow <davidchow@xxxxxxxxxxxxxxxx>
Fwd: Re: The place that saved me
- From: bbruce_28@xxxxxxxxx
[2.4.21] Small patch to quieten md.c boot messages
- From: Mark ZZZ Smith <markzzzsmith@xxxxxxxxxxxx>
Re: how to uninstall raid
- From: Jose Luis Domingo Lopez <linux-raid@xxxxxxxxxxxxx>
how to uninstall raid
- From: "Zhai, Edwin" <edwin.zhai@xxxxxxxxx>
multipath howto?
- From: Rich Ramos <lists@xxxxxxxxxxxxx>
ANNOUNCE: mdadm 1.3.0 - A tools for managing Soft RAID under Linux
- From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
Re: where to buy very very large cases
- From: Mike Dresser <mdresser_l@xxxxxxxxxxxxxxxxxx>
Re: where to buy very very large cases
- From: Ross Vandegrift <ross@xxxxxxxxxxxxxxxx>
Re: where to buy very very large cases
- From: Mike Dresser <mdresser_l@xxxxxxxxxxxxxxxxxx>
Re: where to buy very very large cases
- From: Mike Dresser <mdresser_l@xxxxxxxxxxxxxxxxxx>
Re: where to buy very very large cases
- From: mjstumpf <mjstumpf@xxxxxxxxx>
Re: where to buy very very large cases
- From: mjstumpf <mjstumpf@xxxxxxxxx>
Re: where to buy very very large cases
- From: Mike Dresser <mdresser_l@xxxxxxxxxxxxxxxxxx>
Re: where to buy very very large cases
- From: Dominik Kubla <dominik.kubla@xxxxxxxxxxxx>
Re: where to buy very very large cases
- From: Jim Ramsey <jwramsey@xxxxxxxxx>
Re: where to buy very very large cases
- From: Ross Vandegrift <ross@xxxxxxxxxxxxxxxx>
Re: where to buy very very large cases
- From: Mike Dresser <mdresser_l@xxxxxxxxxxxxxxxxxx>
Re: where to buy very very large cases
- From: Mike Dresser <mdresser_l@xxxxxxxxxxxxxxxxxx>
Re: where to buy very very large cases
- From: Mads Peter Bach <mpb@xxxxxxxxxx>
Re: where to buy very very large cases
- From: Jim Ramsey <jwramsey@xxxxxxxxx>
Re: where to buy very very large cases
- From: "Rev. Jeffrey Paul" <sneak@xxxxxxxxxxxx>
where to buy very very large cases
- From: mjstumpf <mjstumpf@xxxxxxxxx>
bug with resync in specific config
- From: mjstumpf <mjstumpf@xxxxxxxxx>
[PATCH] md - Resolve problem with refcounting of md arrays.
- From: NeilBrown <neilb@xxxxxxxxxxxxxxx>
why didn't the RAID fail?
- From: "Robert L. Harris" <Robert.L.Harris@xxxxxxxx>
Re: raid 5 on linux --againnnn (sorryy it's big)
- From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
Re: raid 5 on linux --againnnn (sorryy it's big)
- From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
Re: raid 5 on linux --againnnn (sorryy it's big)
- From: <c4c3m@xxxxxxxxxx>
Re: Fast RAID rebuild?
- From: danci@xxxxxxxxx
Re: raid 5 on linux --againnnn (sorryy it's big)
- From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
Re: RAID 5 On Linux
- From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
raid 5 on linux --againnnn (sorryy it's big)
- From: <c4c3m@xxxxxxxxxx>
Re: RAID 5 On Linux
- From: <c4c3m@xxxxxxxxxx>
Re: RAID 5 On Linux
- From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
Re: RAID 5 On Linux
- From: <c4c3m@xxxxxxxxxx>
Re: Software RAID within RAID
- From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
Software RAID within RAID
- From: David Anderson <david.anderson@xxxxxxxxxx>
Re: RAID 5 On Linux
- From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
RAID 5 On Linux
- From: <c4c3m@xxxxxxxxxx>
Re: Fast RAID rebuild?
- From: Warren Young <warren@xxxxxxxxxxx>
Re: 2.6.0-test1-bk2 ate my root raid
- From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
2.6.0-test1-bk2 ate my root raid
- From: Thomas <thomas@xxxxxxxxxx>
Fast RAID rebuild?
- From: danci@xxxxxxxxx
Recreating RAID from a healthy full disk
- From: "Vladimír Třebický" <trebicky@xxxxxxxx>
Re: 2.4.21 kernel upgrade and md support (especially mdp partitionedarrays)
- From: Vinnie <listacct1@xxxxxxxxxx>
2.4.21 kernel upgrade and md support (especially mdp partitionedarrays)
- From: Vinnie <listacct1@xxxxxxxxxx>
Re: hardware raid
- From: "Peter L. Ashford" <ashford@xxxxxxxx>
hardware raid
- From: "Mikael Chambon" <raid-ml@xxxxxxxxxx>
A simple question
- From: "Donghui Wen" <dhwen@xxxxxxxxxxxxxxxxxxx>
Booting a RAID-1
- From: "Miguel Angel Martinez Ezquerro" <scsmaezm@xxxxxxxxx>
Re: [ENBD] is raid of raid possible ?
- From: Andrew Rechenberg <arechenberg@xxxxxxxxxxxx>
Re: [ENBD] is raid of raid possible ?
- From: Bernd Schubert <bernd.schubert@xxxxxxxxxxxxxxxxxxxxx>
Re: Performance difference between two raid0 arrays on same drives?
- From: Michel Bellais <michel@xxxxxxxxxx>
Re: RAID design
- From: Gordon Henderson <gordon@xxxxxxxxxx>
Re: RAID design
- From: Sandro Dentella <sandro.dentella@xxxxxx>
Re: RAID design
- From: "David Rees" <dbr@xxxxxxxxxxxxxxxx>
Re: Performance difference between two raid0 arrays on same drives?
- From: Michel Bellais <michel@xxxxxxxxxx>
Re: Performance difference between two raid0 arrays on same drives?
- From: Mads Peter Bach <mpb@xxxxxxxxxx>
Re: Performance difference between two raid0 arrays on same drives?
- From: Gordon Henderson <gordon@xxxxxxxxxx>
Re: Performance difference between two raid0 arrays on same drives?
- From: Michel Bellais <michel@xxxxxxxxxx>
Re: RAID design
- From: Gordon Henderson <gordon@xxxxxxxxxx>
Re: Performance difference between two raid0 arrays on same drives?
- From: Gregory Leblanc <gleblanc@xxxxxxxxxxxxxxx>
RAID design
- From: "Mikael Chambon" <raid-ml@xxxxxxxxxx>
Re: Tecs informations about Software RAID on Linux
- From: "Peter L. Ashford" <ashford@xxxxxxxx>
Tecs informations about Software RAID on Linux
- From: Leonardo Dias <leoadias@xxxxxxxxxxxx>
Performance difference between two raid0 arrays on same drives?
- From: Michel <michel@xxxxxxxxxx>
Bugfix: mkraid
- From: Peter.Seiderer@xxxxxx
is raid of raid possible ?
- From: Bernd Schubert <bernd.schubert@xxxxxxxxxxxxxxxxxxxxx>
Re: RAID md-personality
- From: Paul Clements <Paul.Clements@xxxxxxxxxxxx>
Re: RAID recovery
- From: Avijit Pathania <foulplay@xxxxxxxxxxxx>
Re: RAID SYNC
- From: Avijit Pathania <foulplay@xxxxxxxxxxxx>
RAID recovery
- From: "Mikael Chambon" <raid-ml@xxxxxxxxxx>
RAID SYNC
- From: "Mikael Chambon" <raid-ml@xxxxxxxxxx>
RAID md-personality
- From: "Mikael Chambon" <raid-ml@xxxxxxxxxx>
Re: Checking consistency of Linux software RAID
- From: "Martin Bene" <martin.bene@xxxxxxxxxxxxx>
Re: Help with /etc/raidtab
- From: "Donghui Wen" <dhwen@xxxxxxxxxxxxxxxxxxx>
Re: Help with /etc/raidtab
- From: "Bradley D. Thornton" <website.is@xxxxxxxxxxxxxxxx>
Help with /etc/raidtab
- From: "Bradley D. Thornton" <website.is@xxxxxxxxxxxxxxxx>
Re: � the best journalist-filesystem for a raid5 ?
- From: "Corey McGuire" <coreyfro@xxxxxxxxxxxx>
Re: Checking consistency of Linux software RAID
- From: "Corey McGuire" <coreyfro@xxxxxxxxxxxx>
Re: software raid hangs.
- From: "Donghui Wen" <dhwen@xxxxxxxxxxxxxxxxxxx>
Re: ¿ the best journalist-filesystem for a raid5 ?
- From: "Bradley D. Thornton" <website.is@xxxxxxxxxxxxxxxx>
Re: software raid hangs.
- From: Matt Simonsen <matt_lists@xxxxxxxxxxxxxx>
Raid 5, Not Detected At Startup
- From: Matt E <mgeusenet@xxxxxxxxx>
software raid hangs.
- From: "Donghui Wen" <dhwen@xxxxxxxxxxxxxxxxxxx>
Re: Checking consistency of Linux software RAID
- From: Bernd Schubert <bernd-schubert@xxxxxx>
Re: Checking consistency of Linux software RAID
- From: "Corey McGuire" <coreyfro@xxxxxxxxxxxx>
Re: Checking consistency of Linux software RAID
- From: Bernd Schubert <bernd-schubert@xxxxxx>
Bug in mdadm?
- From: Tapani Utriainen <tapani@xxxxxxxxxxxxxx>
Re: ¿ the best journalist-filesystem for a raid5 ?
- From: system_lists@xxxxxxxxxxxx
Making more space in RAID5 array: questions
- From: Ruth Ivimey-Cook <Ruth.Ivimey-Cook@xxxxxxxxxx>
RE: Booting a disk (mirrored) in other system
- From: "Miguel Angel Martinez Ezquerro" <scsmaezm@xxxxxxxxx>
Re: ¿ the best journalist-filesystem for a raid5 ?
- From: Joshua Baker-LePain <jlb17@xxxxxxxx>
Re: ¿ the best journalist-filesystem for a
- From: Stephen C Woods <scw@xxxxxxxxxxxxx>
¿ the best journalist-filesystem for a raid5 ?
- From: system_lists@xxxxxxxxxxxx
Problems with autodetecting arrays
- From: Kari Kallioinen <karbas-raid@xxxxxxxxxxxxxxxxxxx>
Re: Booting a disk (mirrored) in other system
- From: Andrew Rechenberg <arechenberg@xxxxxxxxxxxxxxxxxxxxxxxxx>
Booting a disk (mirrored) in other system
- From: "Miguel Angel Martinez Ezquerro" <scsmaezm@xxxxxxxxx>
Re: raid 5 crash and data loss
- From: Arne Brutschy <abrutschy@xxxxxxxx>
raid 5 crash and data loss
- From: Arne Brutschy <abrutschy@xxxxxxxx>
Re: Really need RESYNC at creation of array???
- From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
Re: Really need RESYNC at the time of RAID1&5 creation?
- From: "Corey McGuire" <coreyfro@xxxxxxxxxxxx>
Re: Really need RESYNC at the time of RAID1&5 creation?
- From: Lars Marowsky-Bree <lmb@xxxxxxx>
Really need RESYNC at the time of RAID1&5 creation?
- From: "bmoon" <bo@xxxxxxxxxxxxxxxxxxxxxx>
Re: Questions Degraded Array with LVM
- From: Scott McDermott <vaxerdec@xxxxxxxxxxxxxxx>
Re: monitoring means for IBM ServeRAID driver?
- From: Lars Marowsky-Bree <lmb@xxxxxxx>
monitoring means for IBM ServeRAID driver?
- From: mjstumpf <mjstumpf@xxxxxxxxx>
Re: Checking consistency of Linux software RAID
- From: Lars Marowsky-Bree <lmb@xxxxxxx>
Re: Checking consistency of Linux software RAID
- From: Gordon Henderson <gordon@xxxxxxxxxx>
Re: Checking consistency of Linux software RAID
- From: Lars Marowsky-Bree <lmb@xxxxxxx>
Re: Checking consistency of Linux software RAID
- From: Lars Marowsky-Bree <lmb@xxxxxxx>
Re: Checking consistency of Linux software RAID
- From: Gordon Henderson <gordon@xxxxxxxxxx>
Checking consistency of Linux software RAID
- From: "Martin Bene" <martin.bene@xxxxxxxxxxxxx>
Re: Software RAID 1 Problem: "raid_autorun failed" booting from /dev/md0
- From: noriok <noriok@xxxxxxxxxxxxxxxxxxxxxxxxxx>
Moving Raid
- From: "Brad Brad" <braddeicide@xxxxxxxxxxx>
Re: 3ware 7500 performance, was: experiences with 3Ware 6400 3W-6400?
- From: Mike Dresser <mdresser_l@xxxxxxxxxxxxxxxxxx>
Re: 3ware 7500 performance, was: experiences with 3Ware 6400 3W-6400?
- From: Mike Dresser <mdresser_l@xxxxxxxxxxxxxxxxxx>
Re[2]: 3ware 7500 performance, was: experiences with 3Ware 6400 3W-6400?
- From: Alex Verbitsky <alexver5@xxxxxxx>
Re: 3ware 7500 performance, was: experiences with 3Ware 6400 3W-6400?
- From: Mikael Abrahamsson <swmike@xxxxxxxxx>
3ware 7500 performance, was: experiences with 3Ware 6400 3W-6400?
- From: Alex Verbitsky <alexver5@xxxxxxx>
Re[2]: experiences with 3Ware 6400 3W-6400?
- From: Alex Verbitsky <alexver5@xxxxxxx>
Re: Safest way to renumber RAID-5 devices
- From: Ian Pilcher <pilchman@xxxxxxxxx>
Re: Safest way to renumber RAID-5 devices
- From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
Safest way to renumber RAID-5 devices
- From: Ian Pilcher <pilchman@xxxxxxxxx>
Questions Degraded Array with LVM
- From: Matt E <mgeusenet@xxxxxxxxx>
Re: Show me the cache, was Mirroring swap
- From: "Corey McGuire" <coreyfro@xxxxxxxxxxxx>
Victory! re: RAID5 causing lockups
- From: "Corey McGuire" <coreyfro@xxxxxxxxxxxx>
Victory! re: RAID5 causing lockups
- From: "Corey McGuire" <mcguire.corey@xxxxxxxxxxxxx>
Re: experiences with 3Ware 6400 3W-6400?
- From: Gordon Henderson <gordon@xxxxxxxxxx>
Re: experiences with 3Ware 6400 3W-6400?
- From: "Rev. Jeffrey Paul" <sneak@xxxxxxxxxxxx>
Re: Show me the cache, was Mirroring swap
- From: Ricky Beam <jfbeam@xxxxxxxxxxxxxx>
Re: experiences with 3Ware 6400 3W-6400?
- From: "David Rees" <dbr@xxxxxxxxxxxxxxxx>
Re: experiences with 3Ware 6400 3W-6400?
- From: "David Rees" <dbr@xxxxxxxxxxxxxxxx>
Re: Show me the cache, was Mirroring swap
- From: "Corey McGuire" <coreyfro@xxxxxxxxxxxx>
Re: Mirroring swap
- From: Ricky Beam <jfbeam@xxxxxxxxxxxxxx>
Re: experiences with 3Ware 6400 3W-6400?
- From: Maurice Hilarius <maurice@xxxxxxxxxxxx>
Re: experiences with 3Ware 6400 3W-6400?
- From: Lars Marowsky-Bree <lmb@xxxxxxx>
Re: experiences with 3Ware 6400 3W-6400?
- From: Mike Dresser <mdresser_l@xxxxxxxxxxxxxxxxxx>
Re: experiences with 3Ware 6400 3W-6400?
- From: Gordon Henderson <gordon@xxxxxxxxxx>
Re: experiences with 3Ware 6400 3W-6400?
- From: "Rev. Jeffrey Paul" <sneak@xxxxxxxxxxxx>
Re: experiences with 3Ware 6400 3W-6400?
- From: "Corey McGuire" <coreyfro@xxxxxxxxxxxx>
duplicate hdc partition table
- From: "Zeno R.R. Davatz" <zdavatz@xxxxxxxxxx>
RE: Mirroring swap
- From: Gordon Henderson <gordon@xxxxxxxxxx>
Re: experiences with 3Ware 6400 3W-6400?
- From: "David Rees" <dbr@xxxxxxxxxxxxxxxx>
re: RAID5 causing lockups
- From: "Corey McGuire" <coreyfro@xxxxxxxxxxxx>
re: RAID5 causing lockups
- From: Mike Dresser <mdresser_l@xxxxxxxxxxxxxxxxxx>
re: RAID5 causing lockups
- From: "Corey McGuire" <coreyfro@xxxxxxxxxxxx>
Re: Mirroring swap
- From: "Corey McGuire" <coreyfro@xxxxxxxxxxxx>
Re: Software RAID 1 Problem: "raid_autorun failed" booting from /dev/md0
- From: noriok <noriok@xxxxxxxxxxxxxxxxxxxxxxxxxx>
Re: Mirroring swap
- From: Scott McDermott <vaxerdec@xxxxxxxxxxxxxxx>
Re: Mirroring swap
- From: "Corey McGuire" <coreyfro@xxxxxxxxxxxx>
Re: Mirroring swap
- From: Scott McDermott <vaxerdec@xxxxxxxxxxxxxxx>
Re: experiences with 3Ware 6400 3W-6400?
- From: Maurice Hilarius <maurice@xxxxxxxxxxxx>
Re: experiences with 3Ware 6400 3W-6400?
- From: "David Rees" <dbr@xxxxxxxxxxxxxxxx>
RE: Mirroring swap
- From: "Corey McGuire" <coreyfro@xxxxxxxxxxxx>
RE: Mirroring swap
- From: Gregory Leblanc <gleblanc@xxxxxxxxxxxxxxx>
Re: experiences with 3Ware 6400 3W-6400?
- From: Joshua Baker-LePain <jlb17@xxxxxxxx>
experiences with 3Ware 6400 3W-6400?
- From: "Rev. Jeffrey Paul" <sneak@xxxxxxxxxxxx>
Software raid hot-swappable?
- From: "Donghui Wen" <dhwen@xxxxxxxxxxxxxxxxxxx>
re: RAID5 causing lockups
- From: "Corey McGuire" <coreyfro@xxxxxxxxxxxx>
Warning: /dev/md/0 is not on the first disk
- From: "Zeno R.R. Davatz" <zdavatz@xxxxxxxxxx>
Re: RAID5 causing lockups
- From: Matthew Mitchell <matthew@xxxxxxxxxx>
Thanks for software RAID!
- From: Robin Whittle <rw@xxxxxxxxxxxxxx>
Re: RAID5 causing lockups
- From: "Mike Black" <mblack@xxxxxxxxxxx>
Re: Mirroring swap
- From: Scott McDermott <vaxerdec@xxxxxxxxxxxxxxx>
RE: Mirroring swap
- From: Gordon Henderson <gordon@xxxxxxxxxx>
Software RAID 1 Prpblem: "raid_autorun failed" booting from /dev/md0
- From: noriok <noriok@xxxxxxxxxxxxxxxxxxxxxxxxxx>
Re: Mirroring swap
- From: Matti Aarnio <matti.aarnio@xxxxxxxxxxx>
RE: Mirroring swap
- From: "Riley Williams" <Riley@xxxxxxxxxxxxx>
How to recover linear array
- From: "Michael Paul" <radius.mp@xxxxxxxxxxx>
Re: RAID5 causing lockups
- From: "Corey McGuire" <coreyfro@xxxxxxxxxxxx>
Re: Failing disk?
- From: "Robert L. Harris" <Robert.L.Harris@xxxxxxxx>
Re: Failing disk?
- From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
Re: RAID5 causing lockups
- From: "Corey McGuire" <coreyfro@xxxxxxxxxxxx>
Re: RAID5 causing lockups
- From: "Corey McGuire" <coreyfro@xxxxxxxxxxxx>
Re: RAID5 causing lockups
- From: "Corey McGuire" <coreyfro@xxxxxxxxxxxx>
Re: RAID5 causing lockups
- From: Matt Simonsen <matt_lists@xxxxxxxxxxxxxx>
RE: Mirroring swap
- From: "Bailey, Scott" <scott.bailey@xxxxxxx>
Re: RAID5 causing lockups
- From: Mike Dresser <mdresser_l@xxxxxxxxxxxxxxxxxx>
Re: RAID5 causing lockups
- From: "Corey McGuire" <coreyfro@xxxxxxxxxxxx>
Mirroring swap
- From: Derek Yeung <dky@xxxxxxxxxxxxxxxx>
Re: RAID5 causing lockups
- From: Mike Dresser <mdresser_l@xxxxxxxxxxxxxxxxxx>
RAID5 causing lockups
- From: "Corey McGuire" <coreyfro@xxxxxxxxxxxx>
Failing disk?
- From: "Robert L. Harris" <Robert.L.Harris@xxxxxxxx>
Multipath BOF at OLS2003
- From: Lars Marowsky-Bree <lmb@xxxxxxx>
Re: RAID1 removal
- From: "Norman Zhang" <nzhang@xxxxxxxxxxxxxxx>
Re: RAID1 removal
- From: "Norman Zhang" <nzhang@xxxxxxxxxxxxxxx>
RAID1 removal
- From: "Norman Zhang" <nzhang@xxxxxxxxxxxxxxx>
Why I couldn't turn the DMA mode on ?
- From: "bmoon" <bo@xxxxxxxxxxxxxxxxxxxxxx>
smart raid1 reads?
- From: Nicholas Leippe <nick@xxxxxxx>
Re: can't reconstruct array and kernel panic
- From: "Donghui Wen" <dhwen@xxxxxxxxxxxxxxxxxxx>
Re: can't reconstruct array and kernel panic
- From: "Dhaval Patel" <dhaval@xxxxxxxx>
can't reconstruct array and kernel panic
- From: Farkas Levente <lfarkas@xxxxxxx>
Re: Multipath problem in a SAN enviromnent
- From: "Ionut Nistor" <ionut@xxxxxxxxx>
Re: [PATCH] md - 2 of 3 - Add BLKSSZGET ioctl for md driver
- From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
Re: [PATCH] md - 2 of 3 - Add BLKSSZGET ioctl for md driver
- From: Marcelo Tosatti <marcelo@xxxxxxxxxxxxxxxx>
Re: [PATCH] md - 2 of 3 - Add BLKSSZGET ioctl for md driver
- From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
Re: [PATCH] md - 2 of 3 - Add BLKSSZGET ioctl for md driver
- From: Marcelo Tosatti <marcelo@xxxxxxxxxxxxxxxx>
Re: Double failure on RAID-5 array
- From: Bernd Schubert <Bernd.Schubert@xxxxxxxxxxxxxxxxxxxxxxxx>
Re: poor performance with raid1 / raid0
- From: Ross Vandegrift <ross@xxxxxxxxxxxxxxxx>
Re: poor performance with raid1 / raid0
- From: Paul Clements <Paul.Clements@xxxxxxxxxxxx>
Re: poor performance with raid1 / raid0
- From: Farkas Levente <lfarkas@xxxxxxx>
problems with mounting root fs in latest 2.4 kernels
- From: Alexander Belov <alexb@xxxxxxxxx>
Re: poor performance with raid1 / raid0
- From: Paul Clements <Paul.Clements@xxxxxxxxxxxx>
Re: poor performance with raid1 / raid0
- From: Per Andreas Buer <perbu@xxxxxxxxx>
Re: poor performance with raid1 / raid0
- From: Andrew Rechenberg <arechenberg@xxxxxxxxxxxx>
poor performance with raid1 / raid0
- From: Per Andreas Buer <perbu@xxxxxxxxx>
Re: Multipath problem in a SAN enviromnent
- From: Lars Marowsky-Bree <lmb@xxxxxxx>
Double failure on RAID-5 array
- From: "Marc Marais" <marc@xxxxxxxxxxxxxxxx>
[PATCH] md - 3 of 3 - Handle concurrent failure of two drives in raid5
- From: NeilBrown <neilb@xxxxxxxxxxxxxxx>
[PATCH] md - 1 of 3 - Fix bug in /proc/mdstat
- From: NeilBrown <neilb@xxxxxxxxxxxxxxx>
[PATCH] md - 2 of 3 - Add BLKSSZGET ioctl for md driver
- From: NeilBrown <neilb@xxxxxxxxxxxxxxx>
a word of caution: mdadm/kernel/gcc
- From: Paul Clements <Paul.Clements@xxxxxxxxxxxx>
Re: RAID 1 cannot boot (using grub)
- From: Ricky Beam <jfbeam@xxxxxxxxxxxxxx>
Re: RAID 1 cannot boot (using grub)
- From: Steven Dake <sdake@xxxxxxxxxx>
Double failure on RAID-5 array
- From: "Marc Marais" <marc@xxxxxxxxxxxxxxxx>
Re: RAID 1 cannot boot (using grub)
- From: Alfred Isele <Alfred.Isele@xxxxxxxxxxxxxxxxxxx>
RE: Invalid argument when creating a RAID-0 array
- From: "Riley Williams" <Riley@xxxxxxxxxxxxx>
Re: Invalid argument when creating a RAID-0 array
- From: Ari Pollak <ari@xxxxxxxxxx>
Re: Invalid argument when creating a RAID-0 array
- From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
Invalid argument when creating a RAID-0 array
- From: Ari Pollak <ari@xxxxxxxxxx>
Re: maximum disk capacity?
- From: Stephan van Hienen <raid@xxxxxxxx>
Re: maximum disk capacity?
- From: Stephan van Hienen <raid@xxxxxxxx>
Re: maximum disk capacity?
- From: "bmoon" <bo@xxxxxxxxxxxxxxxxxxxxxx>
RAID 1 cannot boot (using grub)
- From: Derek Yeung <dky@xxxxxxxxxxxxxxxx>
Re: maximum disk capacity?
- From: "Peter L. Ashford" <ashford@xxxxxxxx>
Re: maximum disk capacity?
- From: "Donghui Wen" <dhwen@xxxxxxxxxxxxxxxxxxx>
Re: maximum disk capacity?
- From: "bmoon" <bo@xxxxxxxxxxxxxxxxxxxxxx>
Re: Multipath problem in a SAN enviromnent
- From: "Ionut Nistor" <ionut@xxxxxxxxx>
Re: maximum disk capacity?
- From: Stephan van Hienen <raid@xxxxxxxx>
Re: Move md raid5 from intel to sparc?
- From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
Re: Crashing a software raid 5 partition ( disk trouble )
- From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
maximum disk capacity?
- From: "Donghui Wen" <dhwen@xxxxxxxxxxxxxxxxxxx>
Re: Crashing a software raid 5 partition ( disk trouble )
- From: Bernd Schubert <bernd-schubert@xxxxxx>
Re: Move md raid5 from intel to sparc?
- From: Paul Clements <Paul.Clements@xxxxxxxxxxxx>
Re: Multipath problem in a SAN enviromnent
- From: Paul Clements <Paul.Clements@xxxxxxxxxxxx>
Re: Move md raid5 from intel to sparc?
- From: Matthew Mitchell <matthew@xxxxxxxxxx>
Re: Crashing a software raid 5 partition ( disk trouble )
- From: "Nicolas Meaux" <nicolas.meaux@xxxxxxxxxxx>
Re: Multipath problem in a SAN enviromnent
- From: "Ionut Nistor" <ionut@xxxxxxxxx>
Re: Crashing a software raid 5 partition ( disk trouble )
- From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
Re: Crashing a software raid 5 partition ( disk trouble )
- From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
Re: Crashing a software raid 5 partition ( disk trouble )
- From: Martin Hermanowski <martin@xxxxxxx>
Crashing a software raid 5 partition ( disk trouble )
- From: "Nicolas Meaux" <nicolas.meaux@xxxxxxxxxxx>
Re: Multipath problem in a SAN enviromnent
- From: Lars Marowsky-Bree <lmb@xxxxxxx>
Re: Multipath problem in a SAN enviromnent
- From: "Ionut Nistor" <ionut@xxxxxxxxx>
Re: Multipath problem in a SAN enviromnent
- From: "Ionut Nistor" <ionut@xxxxxxxxx>
Re: Multipath problem in a SAN enviromnent
- From: "Ionut Nistor" <ionut@xxxxxxxxx>
Re: Move md raid5 from intel to sparc?
- From: Tom Vier <tmv@xxxxxxxxxxx>
Re: Move md raid5 from intel to sparc?
- From: Matti Aarnio <matti.aarnio@xxxxxxxxxxx>
Re: Move md raid5 from intel to sparc?
- From: Paul Clements <Paul.Clements@xxxxxxxxxxxx>
Re: Move md raid5 from intel to sparc?
- From: Mike Tran <mhtran@xxxxxxxxxx>
Re: Multipath problem in a SAN enviromnent
- From: Paul Clements <Paul.Clements@xxxxxxxxxxxx>
Re: Move md raid5 from intel to sparc?
- From: "3tcdgwg3" <3tcdgwg3@xxxxxxxxxxx>
Re: Multipath problem in a SAN enviromnent
- From: Luca Berra <bluca@xxxxxxxxxx>
Re: Move md raid5 from intel to sparc?
- From: Mike Tran <mhtran@xxxxxxxxxx>
Re: Move md raid5 from intel to sparc?
- From: Matt Stegman <matts@xxxxxxx>
RE: Move md raid5 from intel to sparc?
- From: "Cal Webster" <cwebster@xxxxxxxxx>
Re: Move md raid5 from intel to sparc?
- From: Matthew Mitchell <matthew@xxxxxxxxxx>
Re: Multipath problem in a SAN enviromnent
- From: Paul Clements <Paul.Clements@xxxxxxxxxxxx>
Re: Move md raid5 from intel to sparc?
- From: Mike Tran <mhtran@xxxxxxxxxx>
Re: Multipath problem in a SAN enviromnent
- From: "Ionut Nistor" <ionut@xxxxxxxxx>
Re: Multipath problem in a SAN enviromnent
- From: "Ionut Nistor" <ionut@xxxxxxxxx>
Moving Disks [Re: Multipath problem in a SAN enviromnent]
- From: Gordon Henderson <gordon@xxxxxxxxxx>
Re: Multipath problem in a SAN enviromnent
- From: Paul Clements <Paul.Clements@xxxxxxxxxxxx>
Re: Multipath problem in a SAN enviromnent
- From: Dominik Kubla <dominik.kubla@xxxxxxxxxxxx>
Move md raid5 from intel to sparc?
- From: Matthew Mitchell <matthew@xxxxxxxxxx>
Multipath problem in a SAN enviromnent
- From: "Ionut Nistor" <ionut@xxxxxxxxx>
Re: PDC202xx with 130GB+ disk
- From: danci@xxxxxxxxx
Re: Fw: [PATCH] md - Zero out some kmalloced space in md driver
- From: Helge Hafting <helgehaf@xxxxxxxxxxxxx>
Re: unable to read superblock ?
- From: Alfred Isele <Alfred.Isele@xxxxxxxxxxxxxxxxxxx>
[PATCH] md - Zero out some kmalloced space in md driver
- From: NeilBrown <neilb@xxxxxxxxxxxxxxx>
Re: systematic oops on disk failure with raid1 on SMP/serial-console
- From: Paul Clements <Paul.Clements@xxxxxxxxxxxx>
Re: PDC202xx with 130GB+ disk
- From: Steven Dake <sdake@xxxxxxxxxx>
systematic oops on disk failure with raid1 on SMP/serial-console
- From: Loic Prylli <loic.prylli@xxxxxxxxxxx>
Re: 3ware and scsi ids
- From: Paul Clements <Paul.Clements@xxxxxxxxxxxx>
RE: 3ware and scsi ids
- From: "Deas, Jim" <James.Deas@xxxxxxxxxxxxxx>
PDC202xx with 130GB+ disk
- From: danci@xxxxxxxxx
Re: Issues with Raid1 on a SS20 running 2.4.20
- From: Paul Clements <Paul.Clements@xxxxxxxxxxxx>
Issues with Raid1 on a SS20 running 2.4.20
- From: Scott Walker <crimson@xxxxxxxxxxxxxxx>
Re: RAID1 help
- From: Ross Vandegrift <ross@xxxxxxxxxxxxxxxx>
Re: SCSI or Ultra-ATA/133
- From: Joshua Baker-LePain <jlb17@xxxxxxxx>
SCSI or Ultra-ATA/133
- From: Yu Chen <chen@xxxxxxxxxxxxx>
unable to read superblock ?
- From: "Donghui Wen" <dhwen@xxxxxxxxxxxxxxxxxxx>
Re: How to recover this RAID5?
- From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
Software level 1 RAID issue
- From: Adriana Rasberry <adrianar@xxxxxxxxxxx>
Re: RAID1 help
- From: Ross Vandegrift <ross@xxxxxxxxxxxxxxxx>
RAID1 help
- From: Jason Gordon <fifreak@xxxxxxxxxxxxxxxxxx>
How to recover this RAID5?
- From: Maurice Hilarius <maurice@xxxxxxxxxxxx>
Re: 3ware and scsi ids
- From: Friedrich Lobenstock <fl@xxxxxxxxxx>
[PATCH] Don't include networking in md drivers
- From: Matthew Wilcox <willy@xxxxxxxxxx>
Re: [linux-lvm] Re: Changing MD device partition type
- From: Heinz.Mauelshagen@xxxxxxxxxxx (Heinz J . Mauelshagen)
Re: report on RAID tools bug/patch
- From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
Re: Changing MD device partition type
- From: Luca Berra <bluca@xxxxxxxxxx>
report on RAID tools bug/patch
- From: David Chow <davidchow@xxxxxxxxxxxxxxxx>
Changing MD device partition type
- From: Prakash Achuthan <prakasha@xxxxxxxxxxxx>
RE: Raid 1 after shutdown or reboot not clean
- From: "Michael Daskalov" <MDaskalov@xxxxxxxxxxxxxxxx>
Re: Raid 1 after shutdown or reboot not clean
- From: "Dhaval Patel" <dhaval@xxxxxxxx>
Raid 1 after shutdown or reboot not clean
- From: Armin Mohring <arminmohring@xxxxxxxxx>
[PATCH] md - 1 of 4 - Fix raid5 bug where wrong 'dev' is used.
- From: NeilBrown <neilb@xxxxxxxxxxxxxxx>
[PATCH] md - 3 of 4 - Fix up freeing of kmalloc structures
- From: NeilBrown <neilb@xxxxxxxxxxxxxxx>
[PATCH] md - 2 of 4 - Fix raid1 handling of writing to multiple devices.
- From: NeilBrown <neilb@xxxxxxxxxxxxxxx>
[PATCH] md - 4 of 4 - Fix bug in /proc/mdstat
- From: NeilBrown <neilb@xxxxxxxxxxxxxxx>
Re: RAID5 software general crash
- From: Mads Peter Bach <mpb@xxxxxxxxxx>
RAID5 software general crash
- From: Compte centre de calcul UCP <cdc@xxxxxxxxxxxxxx>
Root RAID with Debian supplied kernels?
- From: Ross Vandegrift <ross@xxxxxxxxxxxxxxxx>
Re: Software RAID level 1 issue
- From: Paul Clements <Paul.Clements@xxxxxxxxxxxx>
Re: Software RAID level 1 issue
- From: "3tcdgwg3" <3tcdgwg3@xxxxxxxxxxx>
raidstop --all not working?
- From: "Lundy, Mike (HIS)" <MLundy@xxxxxxxxxx>
RE: Software RAID level 1 issue
- From: Gregory Leblanc <gleblanc@xxxxxxxxxxxxxxx>
Re: Software RAID level 1 issue
- From: "Robert L. Harris" <Robert.L.Harris@xxxxxxxx>
Re: Software RAID level 1 issue
- From: Paul Clements <Paul.Clements@xxxxxxxxxxxx>
Re: Strange Kernel Problem
- From: Maurice Hilarius <maurice@xxxxxxxxxxxx>
Re: Software RAID level 1 issue
- From: "Robert L. Harris" <Robert.L.Harris@xxxxxxxx>
Re: Software RAID level 1 issue
- From: Stef Telford <stef@xxxxxxxxxxxxxxxxxxxxxx>
Re: Software RAID level 1 issue
- From: Paul Clements <Paul.Clements@xxxxxxxxxxxx>
Re: raid5, 2 drives dead at same time,kernel will Oops?
- From: "3tcdgwg3" <3tcdgwg3@xxxxxxxxxxx>
Re: Software RAID level 1 issue
- From: "3tcdgwg3" <3tcdgwg3@xxxxxxxxxxx>
Re: Software RAID level 1 issue
- From: Paul Clements <Paul.Clements@xxxxxxxxxxxx>
RE: Software RAID level 1 issue
- From: Stef Telford <stef@xxxxxxxxxxxxxxxxxxxxxx>
Re: Software RAID level 1 issue
- From: "Robert L. Harris" <Robert.L.Harris@xxxxxxxx>
RE: Software RAID level 1 issue
- From: Brian Schwarz <Brian.Schwarz@xxxxxxxxxxx>
Software RAID level 1 issue
- From: Adriana Rasberry <adrianar@xxxxxxxxxxx>
Software RAID level 1 issue
- From: Greg Rasberry <rgreg-r@xxxxxxxxxxx>
Re: How do we handle the same but uptodated data to disk cache?
- From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
RE: Heavy paging, but no swap being used.--MORE INFO
- From: "Shaw, Marco" <Marco.Shaw@xxxxxxxxx>
Heavy paging, but no swap being used.
- From: "Shaw, Marco" <Marco.Shaw@xxxxxxxxx>
Re: Strange Kernel Problem
- From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
Strange Kernel Problem
- From: Maurice Hilarius <maurice@xxxxxxxxxxxx>
Re: Raid chunksize...
- From: Tom Vier <tmv@xxxxxxxxxxx>
Re: Raid chunksize...
- From: Matt <matt@xxxxxxxxxxxxxxxxxx>
Re: Raid chunksize...
- From: Tom Vier <tmv@xxxxxxxxxxx>
Re: How do we handle the same but uptodated data to disk cache?
- From: "bmoon" <bo@xxxxxxxxxxxxxxxxxxxxxx>
Re: MD drivers problems on 2.4.x
- From: Eric BENARD / Free <ebenard@xxxxxxx>
Raid chunksize...
- From: Matt <matt@xxxxxxxxxxxxxxxxxx>
Re: How do we handle the same but uptodated data to disk cache?
- From: "bmoon" <bo@xxxxxxxxxxxxxxxxxxxxxx>
RE: cluster RAID
- From: Brian Schwarz <Brian.Schwarz@xxxxxxxxxxx>
Re: cluster RAID
- From: Steven Dake <sdake@xxxxxxxxxx>
Re: RAID strangeness
- From: "Andre' Breiler" <andre.breiler@xxxxxxxxxxx>
RAID strangeness
- From: Bruce Pinsky <bep@xxxxxxxxx>
Re: MD drivers problems on 2.4.x
- From: Eric BENARD / Free <ebenard@xxxxxxx>
Re: MD drivers problems on 2.4.x
- From: danci@xxxxxxxxx
[PATCH] md - 13 of 14 - Remove dependance on MD_SB_DISKS in linear personality
- From: NeilBrown <neilb@xxxxxxxxxxxxxxx>
[PATCH] md - 14 of 14 - Replace bdev_partition_name with calls to bdevname
- From: NeilBrown <neilb@xxxxxxxxxxxxxxx>
[PATCH] md - 9 of 14 - Remove dependancy on MD_SB_DISKS from multipath
- From: NeilBrown <neilb@xxxxxxxxxxxxxxx>
[PATCH] md - 8 of 14 - Improve raid0 mapping code to simplify and reduce mem usage.
- From: NeilBrown <neilb@xxxxxxxxxxxxxxx>
[PATCH] md - 2 of 14 - Use new single page bio splitting for raid0 and linear
- From: NeilBrown <neilb@xxxxxxxxxxxxxxx>
[PATCH] md - 6 of 14 - Get rid of vmalloc/vfree from raid0
- From: NeilBrown <neilb@xxxxxxxxxxxxxxx>
[PATCH] md - 4 of 14 - Improve test for which raid1 device doesn't need to be written to.
- From: NeilBrown <neilb@xxxxxxxxxxxxxxx>
[PATCH] md - 11 of 14 - Remove dependancy on MD_SB_DISKS from raid0
- From: NeilBrown <neilb@xxxxxxxxxxxxxxx>
[PATCH] md - 10 of 14 - Remove dependancy on MD_SB_DISKS from raid5
- From: NeilBrown <neilb@xxxxxxxxxxxxxxx>
[PATCH] md - 12 of 14 - Remove MD_SB_DISKS limits from raid1
- From: NeilBrown <neilb@xxxxxxxxxxxxxxx>
[PATCH] md - 1 of 14 - Export bio_split_pool for md to use.
- From: NeilBrown <neilb@xxxxxxxxxxxxxxx>
[PATCH] md - 5 of 14 - Fix simple off-by-one error in md driver.
- From: NeilBrown <neilb@xxxxxxxxxxxxxxx>
[PATCH] md - 3 of 14 - Handle concurrent failure of two drives in raid5
- From: NeilBrown <neilb@xxxxxxxxxxxxxxx>
[PATCH] md - 7 of 14 - Always allow a half-built md array to be stopped.
- From: NeilBrown <neilb@xxxxxxxxxxxxxxx>
Re: What is the logic behind 'Device or resource busy' ?
- From: Jure Pecar <pegasus@xxxxxxxxxxxx>
Re: How do we handle the same but uptodated data to disk cache?
- From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
How do we handle the same but uptodated data to disk cache?
- From: "bmoon" <bo@xxxxxxxxxxxxxxxxxxxxxx>
Re: What is the logic behind 'Device or resource busy' ?
- From: Joe Pruett <joey@xxxxxx>
What is the logic behind 'Device or resource busy' ?
- From: Jure Pecar <pegasus@xxxxxxxxxxxx>
RE: cluster RAID
- From: "Sean Kormilo" <skormilo@xxxxxxxxxxxxxxxxxx>
RE: MD drivers problems on 2.4.x
- From: "Riley Williams" <Riley@xxxxxxxxxxxxx>
RE: MD drivers problems on 2.4.x
- From: "Riley Williams" <Riley@xxxxxxxxxxxxx>
Re: MD drivers problems on 2.4.x
- From: Eric BENARD / Free <ebenard@xxxxxxx>
RE: cluster RAID
- From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
Re: MD drivers problems on 2.4.x
- From: Juri Haberland <list-linux.raid@xxxxxxxxxxx>
RE: cluster RAID
- From: "Kai-Min Sung" <k@xxxxxxxxxxx>
Re: cluster RAID
- From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
cluster RAID
- From: "Kai-Min Sung" <k@xxxxxxxxxxx>
Re: hello
- From: "Dhaval Patel" <dhaval@xxxxxxxx>
MD drivers problems on 2.4.x
- From: Eric BENARD / Free <ebenard@xxxxxxx>
Re: hello
- From: "Nick" <Nick@xxxxxx>
Re: hello
- From: "Dhaval Patel" <dhaval@xxxxxxxx>
hello
- From: "Dhaval Patel" <dhaval@xxxxxxxx>
Re: raid5, 2 drives dead at same time,kernel will Oops?
- From: "3tcdgwg3" <3tcdgwg3@xxxxxxxxxxx>
Re: mdadm never notify, grub cause fault
- From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
Re: Questions about LARGE, RAID storage under Linux
- From: Ragnar Kjørstad <kernel@xxxxxxxxxxxxxxxxxxx>
Re: mdadm never notify, grub cause fault
- From: Farkas Levente <lfarkas@xxxxxxx>
Re: mdadm never notify, grub cause fault
- From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
Re: raid5, 2 drives dead at same time,kernel will Oops?
- From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
Questions about LARGE, RAID storage under Linux
- From: "Michael S. Peek" <peek@xxxxxxxxxxxx>
raid5, 2 drives dead at same time,kernel will Oops?
- From: "3tcdgwg3" <3tcdgwg3@xxxxxxxxxxx>
RE: removing RAID 1 from a RH 7.1 box
- From: "Riley Williams" <Riley@xxxxxxxxxxxxx>
Re: removing RAID 1 from a RH 7.1 box
- From: Trevor Morrison <trevor@xxxxxxxxxx>
Re: removing RAID 1 from a RH 7.1 box
- From: Mads Peter Bach <mpb@xxxxxxxxxx>
removing RAID 1 from a RH 7.1 box
- From: Trevor Morrison <trevor@xxxxxxxxxx>
Re: mdadm never notify, grub cause fault
- From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
Re: mdadm never notify, grub cause fault
- From: Farkas Levente <lfarkas@xxxxxxx>
Re: mdadm never notify, grub cause fault
- From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
SCSI disk error, I/O eror
- From: listuser@xxxxxxxxxxxx
Re: RAID-5 missing one disk.
- From: Mads Peter Bach <mpb@xxxxxxxxxx>
Re: RAID-5 missing one disk.
- From: Victor <linux-raid@xxxxxxxxx>
Re: RAID-5 missing one disk.
- From: Mads Peter Bach <mpb@xxxxxxxxxx>
RAID-5 missing one disk.
- From: Victor <linux-raid@xxxxxxxxx>
Re: mdadm never notify, grub cause fault
- From: Paul Clements <Paul.Clements@xxxxxxxxxxxx>
Re: mdadm never notify, grub cause fault
- From: Juri Haberland <list-linux.raid@xxxxxxxxxxx>
mdadm never notify, grub cause fault
- From: Farkas Levente <lfarkas@xxxxxxx>
4k issue on MD device block size
- From: "bmoon" <bo@xxxxxxxxxxxxxxxxxxxxxx>
Re: mdadm.conf questions
- From: Herta Van den Eynde <herta.vandeneynde@xxxxxxxxxxxxxxxxx>
mdadm.conf questions
- From: Herta Van den Eynde <herta.vandeneynde@xxxxxxxxxxxxxxxxx>
Re: RAID startup problem
- From: Stephen Lee <splee@xxxxxxxxxx>
RAID startup problem
- From: Maurice Hilarius <maurice@xxxxxxxxxxxx>
Re: Veritas Volume Manager
- From: John DeFranco <defranco@xxxxxxxxxx>
Re: Veritas Volume Manager
- From: John Finlay <finlay@xxxxxxxxxxx>
RE: MD/RAID1 Large File Support
- From: "Duncan, Mike" <Mike.Duncan@xxxxxxxxxxxxx>
Re: Veritas Volume Manager
- From: Jose Luis Domingo Lopez <linux-raid@xxxxxxxxxxxxx>
Re: MD/RAID1 Large File Support
- From: Bernd Schubert <bernd-schubert@xxxxxx>
Re: Veritas Volume Manager
- From: John Finlay <finlay@xxxxxxxxxxx>
Re: [PATCH][RFC] Fix "two RAID1 mirrors are faster than three"
- From: Chuck Ebbert <76306.1226@xxxxxxxxxxxxxx>
Re: Last ditch effort for RH9 and LSR0
- From: Brennahn Chesteine <ven_ficken@xxxxxxxxx>
Re: calc. of currspeed in md.c code in 2.4.20
- From: "Peter T. Breuer" <ptb@xxxxxxxxxx>
Re: calc. of currspeed in md.c code in 2.4.20
- From: Paul Clements <Paul.Clements@xxxxxxxxxxxx>
Re: calc. of currspeed in md.c code in 2.4.20
- From: "Peter T. Breuer" <ptb@xxxxxxxxxx>
Re: calc. of currspeed in md.c code in 2.4.20
- From: Paul Clements <Paul.Clements@xxxxxxxxxxxx>
Re: calc. of currspeed in md.c code in 2.4.20
- From: "Peter T. Breuer" <ptb@xxxxxxxxxx>
Re: Last ditch effort for RH9 and LSR0
- From: Brennahn Chesteine <ven_ficken@xxxxxxxxx>
RE: Veritas Volume Manager
- From: "Buechler, Mark R" <Mark_R_Buechler@xxxxxxxxxx>
Re: calc. of currspeed in md.c code in 2.4.20
- From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
Veritas Volume Manager
- From: John Finlay <finlay@xxxxxxxxxxx>
calc. of currspeed in md.c code in 2.4.20
- From: "Peter T. Breuer" <ptb@xxxxxxxxxx>
Re: Last ditch effort for RH9 and LSR0
- From: Mads Peter Bach <mpb@xxxxxxxxxx>
Last ditch effort for RH9 and LSR0
- From: Brennahn Chesteine <ven_ficken@xxxxxxxxx>
Re: MD/RAID1 Large File Support
- From: Mikael Johansson <mpjohans@xxxxxxxxxxxxxxx>
Re: MD/RAID1 Large File Support
- From: Mike Dresser <mdresser_l@xxxxxxxxxxxxxxxxxx>

[Index of Archives] [Linux RAID Wiki] [ATA RAID] [Linux SCSI Target Infrastructure] [Linux Block] [Linux IDE] [Linux SCSI] [Linux Hams] [Device Mapper] [Kernel] [Linux Admin] [Linux Net] [GFS] [RPM] [git] [Yosemite Forum] [Linux Networking]