On Wed, 2003-05-14 at 19:47, Maurice Hilarius wrote: > Hi There! > > I just set up a server with 2 x 3Ware cards, 16 IDE disks, and am building > a number of software md raids using mdadm. > > Everything built and synched OK, but the raid1 devices don't seem to come > up upon reboot. > > Any suggestions are appreciated! > > Here is some fairly detailed info: > > > Status upon reboot: > > md2 : active raid5 sdl1[2] sde1[1] sdd1[0] > 19550848 blocks level 5, 64k chunk, algorithm 2 [3/3] [UUU] > > md6 : active raid5 sdl2[2] sde2[1] sdd2[0] > 136745088 blocks level 5, 64k chunk, algorithm 2 [3/3] [UUU] > > md7 : active raid5 sdn2[2] sdm2[1] sdf2[0] > 136745088 blocks level 5, 64k chunk, algorithm 2 [3/3] [UUU] > > md8 : active raid5 sdo2[2] sdh2[1] sdg2[0] > 136745088 blocks level 5, 64k chunk, algorithm 2 [3/3] [UUU] > > unused devices: <none> Was your raid1 module loaded prior to calling the raid1 devices during bootup? What personalities does /proc/mdstat show? Stephen - To unsubscribe from this list: send the line "unsubscribe linux-raid" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
