Linux RAID Storage Date Index

• Thread Index

• Re: How do i limit the bandwidth-usage while resyncing on RAID 1?
  • From: Richard Scobie <richard@xxxxxxxxxxx>
• Re: How do i limit the bandwidth-usage while resyncing on RAID 1?
  • From: Tomasz Chmielewski <mangoo@xxxxxxxx>
• How do i limit the bandwidth-usage while resyncing on RAID 1?
  • From: "Rustedt, Florian" <florian.rustedt@xxxxxxxxxxx>
• Different sized disks for RAID1+0 or RAID10.
  • From: Kelly Byrd <kbyrd-linuxraid@xxxxxxxxxx>
• Re: [PATCH] Expose the degraded status of an assembled array through sysfs
  • From: Iustin Pop <iusty@xxxxxxxxx>
• Re: [PATCH -mm 0/4] raid5: stripe_queue (+20% to +90% write performance)
  • From: Dan Williams <dan.j.williams@xxxxxxxxx>
• Re: very degraded RAID5, or increasing capacity by adding discs
  • From: Neil Brown <neilb@xxxxxxx>
• Help RAID5 reshape Oops / backup-file
  • From: Nagilum <nagilum@xxxxxxxxxxx>
• How can I see if a (disk) block device is in use?
  • From: "Leon Woestenberg" <leon.woestenberg@xxxxxxxxx>
• Re: very degraded RAID5, or increasing capacity by adding discs
  • From: "Mr. James W. Laferriere" <babydr@xxxxxxxxxxxxxxxx>
• Re: very degraded RAID5, or increasing capacity by adding discs
  • From: Janek Kozicki <janek_listy@xxxxx>
• Re: very degraded RAID5, or increasing capacity by adding discs
  • From: Janek Kozicki <janek_listy@xxxxx>
• Problem adding a new smaller partition in array
  • From: Frédéric Mantegazza <mantegazza@xxxxxx>
• Raid5 growing problem
  • From: nagilum@xxxxxxxxxxx
• Re: your mail
  • From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
• [no subject]
  • From: Frédéric Mantegazza <mantegazza@xxxxxx>
• Re: very degraded RAID5, or increasing capacity by adding discs
  • From: Michael Tokarev <mjt@xxxxxxxxxx>
• Re: [PATCH -mm 0/4] raid5: stripe_queue (+20% to +90% write performance)
  • From: Neil Brown <neilb@xxxxxxx>
• Re: very degraded RAID5, or increasing capacity by adding discs
  • From: Neil Brown <neilb@xxxxxxx>
• Re: very degraded RAID5, or increasing capacity by adding discs
  • From: Neil Brown <neilb@xxxxxxx>
• RE: very degraded RAID5, or increasing capacity by adding discs
  • From: "Guy Watkins" <linux-raid@xxxxxxxxxxxxxxxx>
• Re: very degraded RAID5, or increasing capacity by adding discs
  • From: Michael Tokarev <mjt@xxxxxxxxxx>
• Re: very degraded RAID5, or increasing capacity by adding discs
  • From: Janek Kozicki <janek_listy@xxxxx>
• Re: very degraded RAID5, or increasing capacity by adding discs
  • From: Janek Kozicki <janek_listy@xxxxx>
• RE: very degraded RAID5, or increasing capacity by adding discs
  • From: "Guy Watkins" <linux-raid@xxxxxxxxxxxxxxxx>
• Re: very degraded RAID5, or increasing capacity by adding discs
  • From: Richard Scobie <richard@xxxxxxxxxxx>
• Re: very degraded RAID5, or increasing capacity by adding discs
  • From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
• very degraded RAID5, or increasing capacity by adding discs
  • From: Janek Kozicki <janek_listy@xxxxx>
• Re: RAID 5 performance issue.
  • From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
• Re: RAID 5 performance issue.
  • From: "Dean S. Messing" <deanm@xxxxxxxxxxxxx>
• Re: [PATCH -mm 0/4] raid5: stripe_queue (+20% to +90% write performance)
  • From: Neil Brown <neilb@xxxxxxx>
• Re: [PATCH -mm 0/4] raid5: stripe_queue (+20% to +90% write performance)
  • From: "Dan Williams" <dan.j.williams@xxxxxxxxx>
• Re: RAID 5 performance issue.
  • From: Andrew Clayton <andrew@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH -mm 0/4] raid5: stripe_queue (+20% to +90% write performance)
  • From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
• [PATCH -mm 4/4] raid5: use stripe_queues to prioritize the "most deserving" requests (rev7)
  • From: Dan Williams <dan.j.williams@xxxxxxxxx>
• [PATCH -mm 3/4] raid5: convert add_stripe_bio to add_queue_bio
  • From: Dan Williams <dan.j.williams@xxxxxxxxx>
• [PATCH -mm 2/4] raid5: split allocation of stripe_heads and stripe_queues
  • From: Dan Williams <dan.j.williams@xxxxxxxxx>
• [PATCH -mm 1/4] raid5: add the stripe_queue object for tracking raid io requests (rev3)
  • From: Dan Williams <dan.j.williams@xxxxxxxxx>
• [PATCH -mm 0/4] raid5: stripe_queue (+20% to +90% write performance)
  • From: Dan Williams <dan.j.williams@xxxxxxxxx>
• Re: RAID 5 performance issue.
  • From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
• Re: RAID 5 performance issue.
  • From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
• Re: RAID 5 performance issue.
  • From: Andrew Clayton <andrew@xxxxxxxxxxxxxxxxxx>
• Re: RAID 5 performance issue.
  • From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
• Re: raid5 growing question
  • From: Shane <shane@xxxxx>
• Re: raid5 growing question
  • From: Eyal Lebedinsky <eyal@xxxxxxxxxxxxxx>
• Re: RAID 5 performance issue.
  • From: "Dean S. Messing" <deanm@xxxxxxxxxxxxx>
• Re: raid5 growing question
  • From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
• Re: RAID 5 performance issue.
  • From: "John Stoffel" <john@xxxxxxxxxxx>
• Re: RAID 5 performance issue.
  • From: Brendan Conoboy <blc@xxxxxxxxxx>
• raid5 growing question
  • From: Shane <shane@xxxxx>
• Re: RAID 5 performance issue.
  • From: Andrew Clayton <andrew@xxxxxxxxxxxxxxxxxx>
• Re: RAID 5 performance issue.
  • From: Andrew Clayton <andrew@xxxxxxxxxxxxxxxxxx>
• Re: RAID 5 performance issue.
  • From: "John Stoffel" <john@xxxxxxxxxxx>
• Re: RAID 5 performance issue.
  • From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
• Re: RAID 5 performance issue.
  • From: Richard Scobie <richard@xxxxxxxxxxx>
• Re: RAID 5 performance issue.
  • From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
• Re: RAID 5 performance issue.
  • From: Andrew Clayton <andrew@xxxxxxxxx>
• Re: Journalling filesystem corruption fixed in between?
  • From: Bill Davidsen <davidsen@xxxxxxx>
• Re: RAID 5 performance issue.
  • From: Andrew Clayton <andrew@xxxxxxxxx>
• Re: RAID 5 performance issue.
  • From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
• Re: RAID 5 performance issue.
  • From: Andrew Clayton <andrew@xxxxxxxxx>
• Re: RAID 5 performance issue.
  • From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
• Re: RAID 5 performance issue.
  • From: Andrew Clayton <andrew@xxxxxxxxxxxxxxxxxx>
• Re: RAID 5 performance issue.
  • From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
• Re: RAID 5 performance issue.
  • From: Andrew Clayton <andrew@xxxxxxxxxxxxxxxxxx>
• Re: RAID 5 performance issue.
  • From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
• Re: RAID 5 performance issue.
  • From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
• Re: RAID 5 performance issue.
  • From: Andrew Clayton <andrew@xxxxxxxxxxxxxxxxxx>
• Re: RAID 5 performance issue.
  • From: Andrew Clayton <andrew@xxxxxxxxxxxxxxxxxx>
• Re: RAID 5 performance issue.
  • From: Andrew Clayton <andrew@xxxxxxxxxxxxxxxxxx>
• Re: RAID 5 performance issue.
  • From: Steve Cousins <steve.cousins@xxxxxxxxx>
• Re: RAID 5 performance issue.
  • From: Steve Cousins <steve.cousins@xxxxxxxxx>
• Re: RAID 5 performance issue.
  • From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
• Re: RAID 5 performance issue.
  • From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
• Re: RAID 5 performance issue.
  • From: Andrew Clayton <andrew@xxxxxxxxxxxxxxxxxx>
• Re: RAID 5 performance issue.
  • From: Andrew Clayton <andrew@xxxxxxxxxxxxxxxxxx>
• Re: RAID 5 performance issue.
  • From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
• Re: RAID 5 performance issue.
  • From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
• Re: RAID 5 performance issue.
  • From: Andrew Clayton <andrew@xxxxxxxxxxxxxxxxxx>
• Re: RAID 5 performance issue.
  • From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
• Re: RAID 5 performance issue.
  • From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
• Re: RAID 5 performance issue.
  • From: Andrew Clayton <andrew@xxxxxxxxxxxxxxxxxx>
• Re: How to create initrd.img to boot LVM-on-RAID0?
  • From: "Dean S. Messing" <deanm@xxxxxxxxxxxxx>
• Re: How to create initrd.img to boot LVM-on-RAID0?
  • From: "Dean S. Messing" <deanm@xxxxxxxxxxxxx>
• Re: RAID 5 performance issue.
  • From: Andrew Clayton <andrew@xxxxxxxxxxxxxxxxxx>
• Re: RAID 5 performance issue.
  • From: Richard Scobie <richard@xxxxxxxxxxx>
• Re: RAID 5 performance issue.
  • From: Andrew Clayton <andrew@xxxxxxxxxxxxxxxxxx>
• Re: RAID 5 performance issue.
  • From: "David Rees" <drees76@xxxxxxxxx>
• Re: RAID 5 performance issue.
  • From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
• Re: RAID 5 performance issue.
  • From: Andrew Clayton <andrew@xxxxxxxxxxxxxxxxxx>
• Re: RAID 5 performance issue.
  • From: Andrew Clayton <andrew@xxxxxxxxxxxxxxxxxx>
• Re: RAID 5 performance issue.
  • From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
• Re: How to create initrd.img to boot LVM-on-RAID0?
  • From: Goswin von Brederlow <brederlo@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: RAID 5 performance issue.
  • From: Goswin von Brederlow <brederlo@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• How to create initrd.img to boot LVM-on-RAID0?
  • From: "Dean S. Messing" <deanm@xxxxxxxxxxxxx>
• Re: RAID 5 performance issue.
  • From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
• Re: RAID 5 performance issue.
  • From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
• RAID 5 performance issue.
  • From: Andrew Clayton <andrew@xxxxxxxxx>
• Re: Journalling filesystem corruption fixed in between?
  • From: Michael Tokarev <mjt@xxxxxxxxxx>
• Re: [PATCH] [mdadm] Add klibc support to mdadm.h
  • From: "H. Peter Anvin" <hpa@xxxxxxxxx>
• Re: Raid performance problems (pdflush / raid5 eats 100%)
  • From: Goswin von Brederlow <brederlo@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: Raid performance problems (pdflush / raid5 eats 100%)
  • From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
• Raid performance problems (pdflush / raid5 eats 100%)
  • From: Goswin von Brederlow <brederlo@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: Journalling filesystem corruption fixed in between?
  • From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
• Journalling filesystem corruption fixed in between?
  • From: "Rustedt, Florian" <florian.rustedt@xxxxxxxxxxx>
• Re: problem killing raid 5
  • From: Daniel Santos <daniel.dlds@xxxxxxxxx>
• Re: problem killing raid 5
  • From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
• Re: problem killing raid 5
  • From: Daniel Santos <daniel.dlds@xxxxxxxxx>
• Re: Optimization report for Justin .
  • From: "Mr. James W. Laferriere" <babydr@xxxxxxxxxxxxxxxx>
• Re: problem killing raid 5
  • From: Michael Tokarev <mjt@xxxxxxxxxx>
• Re: Optimization report for Justin .
  • From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
• Optimization report for Justin .
  • From: "Mr. James W. Laferriere" <babydr@xxxxxxxxxxxxxxxx>
• Re: RAID5 lockup with AMCC440 and async-tx
  • From: "Dale Dunlea" <ddunlea@xxxxxxxxx>
• Re: problem killing raid 5
  • From: Patrik Jonsson <patrik@xxxxxxxxxxx>
• Re: problem killing raid 5
  • From: Michael Tokarev <mjt@xxxxxxxxxx>
• Re: problem killing raid 5
  • From: Daniel Santos <daniel.dlds@xxxxxxxxx>
• Re: RAID5 lockup with AMCC440 and async-tx
  • From: Wolfgang Denk <wd@xxxxxxx>
• problem killing raid 5
  • From: Daniel Santos <daniel.dlds@xxxxxxxxx>
• Re: RAID5 lockup with AMCC440 and async-tx
  • From: "Dale Dunlea" <ddunlea@xxxxxxxxx>
• Re: RAID5 lockup with AMCC440 and async-tx
  • From: Wolfgang Denk <wd@xxxxxxx>
• Re: RAID5 lockup with AMCC440 and async-tx
  • From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
• RAID5 lockup with AMCC440 and async-tx
  • From: "Dale Dunlea" <ddunlea@xxxxxxxxx>
• Re: Backups w/ rsync
  • From: Michal Soltys <nozo@xxxxxxxx>
• Re: Bug#444682: [PATCH] Fix segfault on assembly on amd64 with v1 superblocks
  • From: Daniel van Eeden <daniel.van.eeden@xxxxxxxxx>
• [PATCH] Fix segfault on assembly on amd64 with v1 superblocks
  • From: "martin f. krafft" <madduck@xxxxxxxxxx>
• [solved] Bug#444682: mdadm segfault at super1.c:1004
  • From: "martin f. krafft" <madduck@xxxxxxxxxx>
• Re: mdadm 2.6.3 segfaults on assembly (v1 superblocks)
  • From: martin f krafft <madduck@xxxxxxxxxxx>
• Re: Bonnie++ with 1024k stripe SW/RAID5 causes kernel to goto D-state
  • From: Chris Snook <csnook@xxxxxxxxxx>
• Bonnie++ with 1024k stripe SW/RAID5 causes kernel to goto D-state
  • From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
• Re: Help: very slow software RAID 5.
  • From: Bill Davidsen <davidsen@xxxxxxx>
• Re: Backups w/ rsync
  • From: Michael Tokarev <mjt@xxxxxxxxxx>
• Re: Backups w/ rsync
  • From: "Dean S. Messing" <deanm@xxxxxxxxxxxxx>
• Re: Help: very slow software RAID 5.
  • From: "Dean S. Messing" <deanm@xxxxxxxxxxxxx>
• Re: Help: very slow software RAID 5.
  • From: "Dean S. Messing" <deanm@xxxxxxxxxxxxx>
• Re: Backups w/ rsync
  • From: "Jon Nelson" <jnelson-linux-raid@xxxxxxxxxxx>
• Re: Backups w/ rsync
  • From: Bill Davidsen <davidsen@xxxxxxx>
• Re: Backups w/ rsync
  • From: Bill Davidsen <davidsen@xxxxxxx>
• Re: Backups w/ rsync
  • From: "Jon Nelson" <jnelson@xxxxxxxxxxx>
• Re: Backups w/ rsync
  • From: Wolfgang Denk <wd@xxxxxxx>
• Re: Backups w/ rsync
  • From: Bill Davidsen <davidsen@xxxxxxx>
• Re: Backups w/ rsync
  • From: Michal Soltys <nozo@xxxxxxxx>
• Re: Backups w/ rsync
  • From: Goswin von Brederlow <brederlo@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: Backups w/ rsync
  • From: Michal Soltys <nozo@xxxxxxxx>
• Re: Backups w/ rsync
  • From: Goswin von Brederlow <brederlo@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: Backups w/ rsync
  • From: Michael Tokarev <mjt@xxxxxxxxxx>
• Backups w/ rsync (was: Help: very slow software RAID 5.)
  • From: "Dean S. Messing" <deanm@xxxxxxxxxxxxx>
• Re: Help: very slow software RAID 5.
  • From: Bill Davidsen <davidsen@xxxxxxx>
• Re: Help: very slow software RAID 5.
  • From: Bill Davidsen <davidsen@xxxxxxx>
• Re: Help: very slow software RAID 5.
  • From: Michal Soltys <nozo@xxxxxxxx>
• Re: Help: very slow software RAID 5.
  • From: "Dean S. Messing" <deanm@xxxxxxxxxxxxx>
• Re: [PATCH] [mdadm] Monitor.c include signal.h directly
  • From: Neil Brown <neilb@xxxxxxx>
• Re: Without tweaking ,
  • From: Richard Scobie <richard@xxxxxxxxxxx>
• Re: Without tweaking ,
  • From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
• Re: Without tweaking ,
  • From: Richard Scobie <richard@xxxxxxxxxxx>
• Re: Without tweaking ,
  • From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
• Re: Without tweaking ,
  • From: Richard Scobie <richard@xxxxxxxxxxx>
• Re: Without tweaking , (was:Re: mkfs options for a 16x hw raid5 and xfs ...)
  • From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
• Without tweaking , (was:Re: mkfs options for a 16x hw raid5 and xfs ...)
  • From: "Mr. James W. Laferriere" <babydr@xxxxxxxxxxxxxxxx>
• Re: mkfs options for a 16x hw raid5 and xfs (mostly large files)
  • From: "Bryan J. Smith" <b.j.smith@xxxxxxxx>
• Re: mkfs options for a 16x hw raid5 and xfs (mostly large files)
  • From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
• [PATCH] [mdadm] Monitor.c include signal.h directly
  • From: maximilian attems <max@xxxxxxx>
• [PATCH] [mdadm] mdopen.c don't shadow major() and minor()
  • From: maximilian attems <max@xxxxxxx>
• [PATCH] [mdadm] Monitor.c s/MAXINT/INT_MAX/g
  • From: maximilian attems <max@xxxxxxx>
• Re: mkfs options for a 16x hw raid5 and xfs (mostly large files)
  • From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
• Re: syncing remote homes.
  • From: "Chris Fanning" <christopher.fanning@xxxxxxxxx>
• Re: Help: very slow software RAID 5.
  • From: Goswin von Brederlow <brederlo@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: Help: very slow software RAID 5.
  • From: "Dean S. Messing" <deanm@xxxxxxxxxxxxx>
• Re: Help: very slow software RAID 5.
  • From: Goswin von Brederlow <brederlo@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: Help: very slow software RAID 5.
  • From: "Dean S. Messing" <deanm@xxxxxxxxxxxxx>
• Re: Help: very slow software RAID 5.
  • From: Goswin von Brederlow <brederlo@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: md device naming question
  • From: Michal Soltys <nozo@xxxxxxxx>
• Re[2]: raid5 - which disk failed ?
  • From: Rainer Fuegenstein <rfu@xxxxxxxxxxxxxxxxxxxxxxxx>
• [GIT PULL] async-tx/md-accel fixes and documentation for 2.6.23
  • From: Dan Williams <dan.j.williams@xxxxxxxxx>
• Re: Speaking of network disks (was: Re: syncing remote homes.)
  • From: Bill Davidsen <davidsen@xxxxxxx>
• Re: md device naming question
  • From: Nix <nix@xxxxxxxxxxxxx>
• Re: mdadm 2.6.3 segfaults on assembly (v1 superblocks)
  • From: Neil Brown <neilb@xxxxxxx>
• Re: [PATCH] [mdadm] Add klibc support to mdadm.h
  • From: Neil Brown <neilb@xxxxxxx>
• Re: raid5 - which disk failed ?
  • From: Neil Brown <neilb@xxxxxxx>
• Re: raid5 - which disk failed ?
  • From: Richard Scobie <richard@xxxxxxxxxxx>
• raid5 - which disk failed ?
  • From: Rainer Fuegenstein <rfu@xxxxxxxxxxxxxxxxxxxxxxxx>
• Re: Speaking of network disks (was: Re: syncing remote homes.)
  • From: Iustin Pop <iusty@xxxxxxxxx>
• Speaking of network disks (was: Re: syncing remote homes.)
  • From: "Mr. James W. Laferriere" <babydr@xxxxxxxxxxxxxxxx>
• Re: raid5 post mortem analisys
  • From: Bill Davidsen <davidsen@xxxxxxx>
• Re: syncing remote homes.
  • From: Bill Davidsen <davidsen@xxxxxxx>
• RE: [PATCH 2.6.23-rc7 0/3] async_tx and md-accel fixes for 2.6.23
  • From: "Williams, Dan J" <dan.j.williams@xxxxxxxxx>
• Re: [PATCH 2.6.23-rc7 0/3] async_tx and md-accel fixes for 2.6.23
  • From: Neil Brown <neilb@xxxxxxx>
• RE: [PATCH 2.6.23-rc7 0/3] async_tx and md-accel fixes for 2.6.23
  • From: "Williams, Dan J" <dan.j.williams@xxxxxxxxx>
• Re: Help: very slow software RAID 5.
  • From: "Dean S. Messing" <deanm@xxxxxxxxxxxxx>
• Re: Help: very slow software RAID 5.
  • From: "Dean S. Messing" <deanm@xxxxxxxxxxxxx>
• Re: [PATCH 2.6.23-rc7 0/3] async_tx and md-accel fixes for 2.6.23
  • From: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
• [PATCH] [mdadm] config.c include dirent.h instead sys/dir.h
  • From: maximilian attems <max@xxxxxxx>
• [PATCH] [mdadm] Create.c s/major/major_num/
  • From: maximilian attems <max@xxxxxxx>
• [PATCH] [mdadm] Add klibc support to mdadm.h
  • From: maximilian attems <max@xxxxxxx>
• raid5 post mortem analisys
  • From: Daniel Santos <daniel.dlds@xxxxxxxxx>
• RE: [PATCH 2.6.23-rc7 1/3] async_tx: usage documentation and developernotes
  • From: "Nelson, Shannon" <shannon.nelson@xxxxxxxxx>
• syncing remote homes.
  • From: "Chris Fanning" <christopher.fanning@xxxxxxxxx>
• Re: [PATCH 2.6.23-rc7 1/3] async_tx: usage documentation and developer notes
  • From: Bill Davidsen <davidsen@xxxxxxx>
• Re: Help: very slow software RAID 5.
  • From: Bill Davidsen <davidsen@xxxxxxx>
• Re: [PATCH 2.6.23-rc7 1/3] async_tx: usage documentation and developer notes
  • From: Randy Dunlap <randy.dunlap@xxxxxxxxxx>
• [PATCH 2.6.23-rc7 3/3] raid5: fix ops_complete_biofill
  • From: Dan Williams <dan.j.williams@xxxxxxxxx>
• [PATCH 2.6.23-rc7 1/3] async_tx: usage documentation and developer notes
  • From: Dan Williams <dan.j.williams@xxxxxxxxx>
• [PATCH 2.6.23-rc7 2/3] async_tx: fix dma_wait_for_async_tx
  • From: Dan Williams <dan.j.williams@xxxxxxxxx>
• [PATCH 2.6.23-rc7 0/3] async_tx and md-accel fixes for 2.6.23
  • From: Dan Williams <dan.j.williams@xxxxxxxxx>
• Re: Help: very slow software RAID 5.
  • From: "Dean S. Messing" <deanm@xxxxxxxxxxxxx>
• Re: Help: very slow software RAID 5.
  • From: Michael Tokarev <mjt@xxxxxxxxxx>
• Re: Help: very slow software RAID 5.
  • From: "Dean S. Messing" <deanm@xxxxxxxxxxxxx>
• Re: Help: very slow software RAID 5.
  • From: "Dean S. Messing" <deanm@xxxxxxxxxxxxx>
• Re: Help: very slow software RAID 5.
  • From: Michal Soltys <nozo@xxxxxxxx>
• Re: MD devices renaming or re-ordering question
  • From: Maurice Hilarius <maurice@xxxxxxxxxxxx>
• Re: Help: very slow software RAID 5.
  • From: Bill Davidsen <davidsen@xxxxxxx>
• Re: MD devices renaming or re-ordering question
  • From: Bill Davidsen <davidsen@xxxxxxx>
• RE: RAID5 starts degraded after reboot
  • From: "Tom Fojta" <tj21@xxxxxxx>
• Re: mke2fs stuck in D state while creating filesystem on md*
  • From: "Wiesner Thomas" <thomas@xxxxxxxxxxxxxx>
• Re: Help: very slow software RAID 5.
  • From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
• Re: mke2fs stuck in D state while creating filesystem on md*
  • From: "Mike Snitzer" <snitzer@xxxxxxxxx>
• Re: Help: very slow software RAID 5.
  • From: "Dean S. Messing" <deanm@xxxxxxxxxxxxx>
• Re: Help: very slow software RAID 5.
  • From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
• Re: Help: very slow software RAID 5.
  • From: "Dean S. Messing" <deanm@xxxxxxxxxxxxx>
• md device naming question
  • From: maximilian attems <max@xxxxxxx>
• Re: Help: very slow software RAID 5.
  • From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
• Re: mke2fs stuck in D state while creating filesystem on md*
  • From: "Wiesner Thomas" <thomas@xxxxxxxxxxxxxx>
• Re: MD RAID1 performance very different from non-RAID partition
  • From: Jordan Russell <jr-list-2007@xxxxxx>
• Re: Help: very slow software RAID 5.
  • From: "Dean S. Messing" <deanm@xxxxxxxxxxxxx>
• Re: Help: very slow software RAID 5.
  • From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
• Help: very slow software RAID 5.
  • From: "Dean S. Messing" <deanm@xxxxxxxxxxxxx>
• Re: [linux-lvm] Q: Online resizing ext3 FS
  • From: Goswin von Brederlow <brederlo@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [linux-lvm] Q: Online resizing ext3 FS
  • From: Bill Davidsen <davidsen@xxxxxxx>
• Re: mke2fs stuck in D state while creating filesystem on md*
  • From: Bill Davidsen <davidsen@xxxxxxx>
• RAID5 starts degraded after reboot
  • From: "Tom Fojta" <tj21@xxxxxxx>
• Re: MD RAID1 performance very different from non-RAID partition
  • From: Luca Berra <bluca@xxxxxxxxxx>
• Re: MD RAID1 performance very different from non-RAID partition
  • From: Jordan Russell <jr-list-2007@xxxxxx>
• Re: reducing the number of disks a RAID1 expects
  • From: Goswin von Brederlow <brederlo@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: MD RAID1 performance very different from non-RAID partition
  • From: Goswin von Brederlow <brederlo@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: reducing the number of disks a RAID1 expects
  • From: "J. David Beutel" <jdb@xxxxxxxxx>
• Re: MD RAID1 performance very different from non-RAID partition
  • From: Jordan Russell <jr-list-2007@xxxxxx>
• Re: MD RAID1 performance very different from non-RAID partition
  • From: Iustin Pop <iusty@xxxxxxxxx>
• Re: MD RAID1 performance very different from non-RAID partition
  • From: Goswin von Brederlow <brederlo@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: MD RAID1 performance very different from non-RAID partition
  • From: Iustin Pop <iusty@xxxxxxxxx>
• MD RAID1 performance very different from non-RAID partition
  • From: Jordan Russell <jr-list-2007@xxxxxx>
• Re: MD devices renaming or re-ordering question
  • From: Goswin von Brederlow <brederlo@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• RE: md raid acceleration and the async_tx api
  • From: "Williams, Dan J" <dan.j.williams@xxxxxxxxx>
• Re: md raid acceleration and the async_tx api
  • From: "Mr. James W. Laferriere" <babydr@xxxxxxxxxxxxxxxx>
• Re: MD devices renaming or re-ordering question
  • From: Goswin von Brederlow <brederlo@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• MD devices renaming or re-ordering question
  • From: Maurice Hilarius <maurice@xxxxxxxxxxxx>
• Re: RAID6 mdadm --grow bug?
  • From: Neil Brown <neilb@xxxxxxx>
• Re: RAID6 mdadm --grow bug?
  • From: David Miller <millerdc@xxxxxxxxxxxxxx>
• Re: md raid acceleration and the async_tx api
  • From: "Dan Williams" <dan.j.williams@xxxxxxxxx>
• Re: [linux-lvm] Q: Online resizing ext3 FS
  • From: Tomasz Chmielewski <mangoo@xxxxxxxx>
• Re: [linux-lvm] Q: Online resizing ext3 FS
  • From: Goswin von Brederlow <brederlo@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [linux-lvm] Q: Online resizing ext3 FS
  • From: Goswin von Brederlow <brederlo@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: RAID6 mdadm --grow bug?
  • From: Neil Brown <neilb@xxxxxxx>
• Re: md raid acceleration and the async_tx api
  • From: Yuri Tikhonov <yur@xxxxxxxxxxx>
• RE: [linux-lvm] Q: Online resizing ext3 FS
  • From: "Hiren Joshi" <josh@xxxxxxxxxxxxx>
• RAID6 mdadm --grow bug?
  • From: David Miller <millerdc@xxxxxxxxxxxxxx>
• RE: [linux-lvm] Q: Online resizing ext3 FS
  • From: "Stuart D. Gathman" <stuart@xxxxxxxx>
• Re: [linux-lvm] Q: Online resizing ext3 FS
  • From: Tomasz Chmielewski <mangoo@xxxxxxxx>
• RE: [linux-lvm] Q: Online resizing ext3 FS
  • From: "Hiren Joshi" <josh@xxxxxxxxxxxxx>
• Q: Online resizing ext3 FS
  • From: Chris Osicki <osk@xxxxxxxxxxxxxxxxxxxxxxxx>
• Re: RAID1 and load-balancing during read
  • From: Dimitrios Apostolou <jimis@xxxxxxx>
• Re: RAID1 and load-balancing during read
  • From: Dimitrios Apostolou <jimis@xxxxxxx>
• Re: RAID1 and load-balancing during read
  • From: Dimitrios Apostolou <jimis@xxxxxxx>
• Re: RAID1 and load-balancing during read
  • From: Dimitrios Apostolou <jimis@xxxxxxx>
• Re: [PATCH] Explain the read-balancing algorithm for RAID1 better in md.4
  • From: Neil Brown <neilb@xxxxxxx>
• Re: RAID1 and load-balancing during read
  • From: Neil Brown <neilb@xxxxxxx>
• Re: reducing the number of disks a RAID1 expects
  • From: Neil Brown <neilb@xxxxxxx>
• Re: RAID1 and load-balancing during read
  • From: Goswin von Brederlow <brederlo@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: reducing the number of disks a RAID1 expects
  • From: Bill Davidsen <davidsen@xxxxxxx>
• Re: RAID1 and load-balancing during read
  • From: Iustin Pop <iusty@xxxxxxxxx>
• [PATCH] Explain the read-balancing algorithm for RAID1 better in md.4
  • From: Iustin Pop <iusty@xxxxxxxxx>
• unreasonable latentcies under heavy write load
  • From: "Jeffrey W. Baker" <jwbaker@xxxxxxx>
• Re: RAID1 and load-balancing during read
  • From: Dimitrios Apostolou <jimis@xxxxxxx>
• Re: RAID1 and load-balancing during read
  • From: Iustin Pop <iusty@xxxxxxxxx>
• RAID1 and load-balancing during read
  • From: Dimitrios Apostolou <jimis@xxxxxxx>
• [PATCH] Expose the degraded status of an assembled array through sysfs
  • From: Iustin Pop <iusty@xxxxxxxxx>
• Re: reducing the number of disks a RAID1 expects
  • From: Iustin Pop <iusty@xxxxxxxxx>
• Re: reducing the number of disks a RAID1 expects
  • From: "J. David Beutel" <jdb@xxxxxxxxx>
• Re: reducing the number of disks a RAID1 expects
  • From: Richard Scobie <richard@xxxxxxxxxxx>
• reducing the number of disks a RAID1 expects
  • From: "J. David Beutel" <jdb@xxxxxxxxx>
• Re: Raid-10 mount at startup always has problem
  • From: "Daniel L. Miller" <dmiller@xxxxxxxxx>
• Re: Raid-10 mount at startup always has problem
  • From: Richard Scobie <richard@xxxxxxxxxxx>
• Re: Raid-10 mount at startup always has problem
  • From: "Daniel L. Miller" <dmiller@xxxxxxxxx>
• AoE/2.6 Question (CORAID brand)
  • From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
• Re: RAID 6 reshape failed (false message about critical section) - success report
  • From: Bill Davidsen <davidsen@xxxxxxx>
• Re: raid1 error handling and faulty drives
  • From: Mike Accetta <maccetta@xxxxxxxxxxxxxxxxxx>
• Grow a degraded raid6?
  • From: Andrew Burgess <aab@xxxxxxxxxxx>
• mdadm 2.6.3 segfaults on assembly (v1 superblocks)
  • From: martin f krafft <madduck@xxxxxxxxxxx>
• Re: RAID 6 reshape failed (false message about critical section) - success report
  • From: "Anton Voloshin" <ashutosh@xxxxxxxxxxxxxx>
• RE: raid5:md3: kernel BUG , followed by , Silent halt .
  • From: "Williams, Dan J" <dan.j.williams@xxxxxxxxx>
• Grow a degraded raid6?
  • From: Andrew Burgess <aab@xxxxxxxxxxx>
• Re: raid1 error handling and faulty drives
  • From: Neil Brown <neilb@xxxxxxx>
• Re: RAID 6 reshape failed (false message about critical section)
  • From: Neil Brown <neilb@xxxxxxx>
• Re: raid5:md3: kernel BUG , followed by , Silent halt .
  • From: "Mr. James W. Laferriere" <babydr@xxxxxxxxxxxxxxxx>
• raid1 error handling and faulty drives
  • From: Mike Accetta <maccetta@xxxxxxxxxxxxxxxxxx>
• Re: RAID 6 reshape failed (false message about critical section)
  • From: Ashutosh Krishna Das <ashutosh@xxxxxxxxxxxxxx>
• Re: RAID 6 reshape failed (false message about critical section)
  • From: Anton Voloshin <ashutosh@xxxxxxxxxxxxxx>
• Re: RAID 6 reshape failed (false message about critical section)
  • From: Neil Brown <neilb@xxxxxxx>
• RAID 6 reshape failed (false message about critical section)
  • From: Anton Voloshin <ashutosh@xxxxxxxxxxxxxx>
• Re: MDADM restart at system boot time
  • From: Richard Scobie <richard@xxxxxxxxxxx>
• Re: MDADM restart at system boot time
  • From: Richard Scobie <richard@xxxxxxxxxxx>
• MDADM restart at system boot time
  • From: Paul <paul@xxxxxxxxxxxxxx>
• mdadm: different component-count in superblocks prevents assembly
  • From: "Mario 'BitKoenig' Holbe" <Mario.Holbe@xxxxxxxxxxxxx>
• mdadm: use Preferred Minor for non-standard named arrays?
  • From: "Mario 'BitKoenig' Holbe" <Mario.Holbe@xxxxxxxxxxxxx>
• Re: raid1 with sata; md stopping all md devices; Synchronizing SCSI cache from disk sda ; ata8 command timeout?
  • From: "George Iosif" <giosif@xxxxxx>
• Re: raid1 with sata; md stopping all md devices; Synchronizing SCSI cache from disk sda ; ata8 command timeout?
  • From: Mitchell Laks <mlaks@xxxxxxxxxxxxxxxx>
• Re: very very strange simultaneous RAID resync on sep 2, 01:06 CEST (+2)
  • From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
• Re: raid1 with sata; md stopping all md devices; Synchronizing SCSI cache from disk sda ; ata8 command timeout?
  • From: "Michael Yao" <danshoe@xxxxxxxxx>
• raid1 with sata; md stopping all md devices; Synchronizing SCSI cache from disk sda ; ata8 command timeout?
  • From: Mitchell Laks <mlaks@xxxxxxxxxxxxxxxx>
• Re: why a bitmap file never changes?
  • From: Tomasz Chmielewski <mangoo@xxxxxxxx>
• Fwd: Re: md raid acceleration and the async_tx api
  • From: Yuri Tikhonov <yur@xxxxxxxxxxx>
• Re: [md-accel PATCH 16/19] dmaengine: driver for the iop32x, iop33x, and iop13xx raid engines
  • From: "Dan Williams" <dan.j.williams@xxxxxxxxx>
• PAGE_SIZE=8K and bitmap
  • From: Jan Engelhardt <jengelh@xxxxxxxxxxxxxxx>
• Re: md raid acceleration and the async_tx api
  • From: "Dan Williams" <dan.j.williams@xxxxxxxxx>
• Re: [md-accel PATCH 16/19] dmaengine: driver for the iop32x, iop33x, and iop13xx raid engines
  • From: "saeed bishara" <saeed.bishara@xxxxxxxxx>
• Re: md raid acceleration and the async_tx api
  • From: Yuri Tikhonov <yur@xxxxxxxxxxx>
• [PATCH] md: Fix some bugs with growing raid5/raid6 arrays.
  • From: NeilBrown <neilb@xxxxxxx>
• RE: Raid5 Reshape gone wrong, please help
  • From: Neil Brown <neilb@xxxxxxx>
• Re: Using my Mirror disk to boot up.
  • From: Iustin Pop <iusty@xxxxxxxxx>
• Using my Mirror disk to boot up.
  • From: chee <cheeming81@xxxxxxxxx>
• mke2fs stuck in D state while creating filesystem on md*
  • From: "Wiesner Thomas" <thomas@xxxxxxxxxxxxxx>
• Re: [patch v5 1/1] md: Software Raid autodetect dev list not array
  • From: Randy Dunlap <randy.dunlap@xxxxxxxxxx>
• Re: bug in --manage mode
  • From: Bill Davidsen <davidsen@xxxxxxx>
• Re: Raid5 Reshape gone wrong, please help
  • From: Bill Davidsen <davidsen@xxxxxxx>
• Re: why a bitmap file never changes?
  • From: Tomasz Chmielewski <mangoo@xxxxxxxx>
• why a bitmap file never changes?
  • From: Tomasz Chmielewski <mangoo@xxxxxxxx>
• [patch v5 1/1] md: Software Raid autodetect dev list not array
  • From: "Michael J. Evans" <mjevans1983@xxxxxxxxxxx>
• Re: raid10 or raid1+0 ?
  • From: Bill Davidsen <davidsen@xxxxxxx>
• Re: Raid-10 mount at startup always has problem
  • From: Bill Davidsen <davidsen@xxxxxxx>
• Re: SWAP file on a RAID-10 array possible?
  • From: Bill Davidsen <davidsen@xxxxxxx>
• [PATCH] drivers/md/raid1: add BUG_ON in raid1_end_write_request on invalid mirror index
  • From: Chris Eineke <Chris.Eineke@xxxxxxxxxxxxx>
• Re: [patch v3 1/1] md: Software Raid autodetect dev list not array
  • From: Randy Dunlap <randy.dunlap@xxxxxxxxxx>
• Re: [patch v3 1/1] md: Software Raid autodetect dev list not array
  • From: "Michael Evans" <mjevans1983@xxxxxxxxx>
• Re: [patch v3 1/1] md: Software Raid autodetect dev list not array
  • From: Randy Dunlap <randy.dunlap@xxxxxxxxxx>
• Re: [patch v3 1/1] md: Software Raid autodetect dev list not array
  • From: "Michael Evans" <mjevans1983@xxxxxxxxx>
• Re: [patch v3 1/1] md: Software Raid autodetect dev list not array
  • From: Randy Dunlap <randy.dunlap@xxxxxxxxxx>
• Re: Linear RAID hot grow
  • From: Bill Davidsen <davidsen@xxxxxxx>
• Re: [patch v3 1/1] md: Software Raid autodetect dev list not array
  • From: "Michael Evans" <mjevans1983@xxxxxxxxx>
• Re: [patch v5 1/1] md: Software Raid autodetect dev list not array
  • From: "Michael J. Evans" <mjevans1983@xxxxxxxxxxx>
• Re: [patch v3 1/1] md: Software Raid autodetect dev list not array
  • From: "Michael J. Evans" <mjevans1983@xxxxxxxxxxx>
• Re: [patch v3 1/1] md: Software Raid autodetect dev list not array
  • From: Bill Davidsen <davidsen@xxxxxxx>
• Re: raid10 or raid1+0 ?
  • From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
• Re: raid10 or raid1+0 ?
  • From: "T. Eichstädt" <t.eichstaedt@xxxxxxxxxx>
• Re: [patch v3 1/1] md: Software Raid autodetect dev list not array
  • From: Jan Engelhardt <jengelh@xxxxxxxxxxxxxxx>
• Re: [patch v3 1/1] md: Software Raid autodetect dev list not array
  • From: "Michael Evans" <mjevans1983@xxxxxxxxx>
• Re: raid10 or raid1+0 ?
  • From: Bill Davidsen <davidsen@xxxxxxx>
• Re: raid10 or raid1+0 ?
  • From: Neil Brown <neilb@xxxxxxx>
• Re: [patch v3 1/1] md: Software Raid autodetect dev list not array
  • From: Randy Dunlap <randy.dunlap@xxxxxxxxxx>
• Re: [patch v3 1/1] md: Software Raid autodetect dev list not array
  • From: "Michael J. Evans" <mjevans1983@xxxxxxxxxxx>
• Re: [patch v4 1/1] md: Software Raid autodetect dev list not array
  • From: "Michael J. Evans" <mjevans1983@xxxxxxxxxxx>
• Re: [patch v3 1/1] md: Software Raid autodetect dev list not array
  • From: Randy Dunlap <randy.dunlap@xxxxxxxxxx>
• [patch v3 1/1] md: Software Raid autodetect dev list not array
  • From: "Michael J. Evans" <mjevans1983@xxxxxxxxxxx>
• Re: raid5:md3: kernel BUG , followed by , Silent halt .
  • From: "Dan Williams" <dan.j.williams@xxxxxxxxx>
• [2.6 patch] bitmap.h: remove dead artefacts
  • From: Adrian Bunk <bunk@xxxxxxxxxx>
• RE: [md-accel PATCH 16/19] dmaengine: driver for the iop32x, iop33x, and iop13xx raid engines
  • From: "Williams, Dan J" <dan.j.williams@xxxxxxxxx>
• RE: md raid acceleration and the async_tx api
  • From: "Williams, Dan J" <dan.j.williams@xxxxxxxxx>
• Raid-10 mount at startup always has problem
  • From: "Daniel L. Miller" <dmiller@xxxxxxxxx>
• RE: Raid5 Reshape gone wrong, please help
  • From: "Williams, Dan J" <dan.j.williams@xxxxxxxxx>
• Re: raid10 or raid1+0 ?
  • From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
• Re: recovery starts from 0 after reboot - normal?
  • From: Tomasz Chmielewski <mangoo@xxxxxxxx>
• Re: [md-accel PATCH 16/19] dmaengine: driver for the iop32x, iop33x, and iop13xx raid engines
  • From: "saeed bishara" <saeed.bishara@xxxxxxxxx>
• Re: [md-accel PATCH 16/19] dmaengine: driver for the iop32x, iop33x, and iop13xx raid engines
  • From: "saeed bishara" <saeed.bishara@xxxxxxxxx>
• Re: Raid5 Reshape gone wrong, please help
  • From: Neil Brown <neilb@xxxxxxx>
• md raid acceleration and the async_tx api
  • From: Yuri Tikhonov <yur@xxxxxxxxxxx>
• Re: Patch for boot-time assembly of v1.x-metadata-based soft (MD) arrays: reasoning and future plans
  • From: David Greaves <david@xxxxxxxxxxxx>
• Re: [patch v2 1/1] md: Software Raid autodetect dev list not array
  • From: "Michael Evans" <mjevans1983@xxxxxxxxx>
• Re: [patch v2 1/1] md: Software Raid autodetect dev list not array
  • From: Kyle Moffett <mrmacman_g4@xxxxxxx>
• raid10 or raid1+0 ?
  • From: "T. Eichstädt" <abc@xxxxxxxxxx>
• Re: Patch for boot-time assembly of v1.x-metadata-based soft (MD) arrays: reasoning and future plans
  • From: "Dan Williams" <dan.j.williams@xxxxxxxxx>
• Patch for boot-time assembly of v1.x-metadata-based soft (MD) arrays: reasoning and future plans
  • From: Abe Skolnik <abe_skolnik@xxxxxxxxx>
• Re: [patch v2 1/1] md: Software Raid autodetect dev list not array
  • From: "Michael Evans" <mjevans1983@xxxxxxxxx>
• Re: Patch for boot-time assembly of v1.x-metadata-based soft (MD) arrays
  • From: "Mr. James W. Laferriere" <babydr@xxxxxxxxxxxxxxxx>
• Re: [patch v2 1/1] md: Software Raid autodetect dev list not array
  • From: Randy Dunlap <randy.dunlap@xxxxxxxxxx>
• Re: [patch v2 1/1] md: Software Raid autodetect dev list not array
  • From: "Michael Evans" <mjevans1983@xxxxxxxxx>
• degenerated raid5 array doesn't rebuild
  • From: Marc Dietrich <Marc.Dietrich@xxxxxxxxxxxxxxxxxxxxxxxx>
• Re: Patch for boot-time assembly of v1.x-metadata-based soft (MD) arrays
  • From: "Dan Williams" <dan.j.williams@xxxxxxxxx>
• Re: Patch for boot-time assembly of v1.x-metadata-based soft (MD) arrays
  • From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
• Patch for boot-time assembly of v1.x-metadata-based soft (MD) arrays
  • From: Abe Skolnik <abe_skolnik@xxxxxxxxx>
• Re: [patch v2 1/1] md: Software Raid autodetect dev list not array
  • From: Jan Engelhardt <jengelh@xxxxxxxxxxxxxxx>
• Re: [patch v2 1/1] md: Software Raid autodetect dev list not array
  • From: "Michael Evans" <mjevans1983@xxxxxxxxx>
• [patch v2 1/1] md: Software Raid autodetect dev list not array
  • From: "Michael J. Evans" <mjevans1983@xxxxxxxxxxx>
• Re: raid5:md3: kernel BUG , followed by , Silent halt .
  • From: "Mr. James W. Laferriere" <babydr@xxxxxxxxxxxxxxxx>
• Re: detecting read errors after RAID1 check operation
  • From: "Mike Snitzer" <snitzer@xxxxxxxxx>
• Re: recovery starts from 0 after reboot - normal?
  • From: Tomasz Chmielewski <mangoo@xxxxxxxx>
• Re: recovery starts from 0 after reboot - normal?
  • From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
• Re: recovery starts from 0 after reboot - normal?
  • From: Tomasz Chmielewski <mangoo@xxxxxxxx>
• Re: recovery starts from 0 after reboot - normal?
  • From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
• Re: recovery starts from 0 after reboot - normal?
  • From: Tomasz Chmielewski <mangoo@xxxxxxxx>
• Re: recovery starts from 0 after reboot - normal?
  • From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
• recovery starts from 0 after reboot - normal?
  • From: Tomasz Chmielewski <mangoo@xxxxxxxx>
• Re: [patch 1/1] md: Software Raid autodetect dev list not array
  • From: "Michael Evans" <mjevans1983@xxxxxxxxx>
• Re: [patch 1/1] md: Software Raid autodetect dev list not array
  • From: Neil Brown <neilb@xxxxxxx>
• Re: Raid5 Reshape gone wrong, please help
  • From: "Greg Nicholson" <d0gz.net@xxxxxxxxx>
• Re: Raid5 Reshape gone wrong, please help
  • From: "Greg Nicholson" <d0gz.net@xxxxxxxxx>
• Re: 4 Port eSATA RAID5/JBOD PCI-E 8x Controller
  • From: Andrew Burgess <aab@xxxxxxxxxxx>
• Re: Linear RAID hot grow
  • From: "Dat Chu" <dattanchu@xxxxxxxxx>
• Re: 4 Port eSATA RAID5/JBOD PCI-E 8x Controller
  • From: David Greaves <david@xxxxxxxxxxxx>
• Re: Linear RAID hot grow
  • From: Neil Brown <neilb@xxxxxxx>
• 4 Port eSATA RAID5/JBOD PCI-E 8x Controller
  • From: Richard Scobie <richard@xxxxxxxxxxx>
• Re: Linear RAID hot grow
  • From: "Dat Chu" <dattanchu@xxxxxxxxx>
• Re: Raid5 Reshape gone wrong, please help
  • From: "Greg Nicholson" <d0gz.net@xxxxxxxxx>
• Re: Linear RAID hot grow
  • From: Neil Brown <neilb@xxxxxxx>
• Re: Linear RAID hot grow
  • From: "Dat Chu" <dattanchu@xxxxxxxxx>
• Re: Linear RAID hot grow
  • From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
• Linear RAID hot grow
  • From: "Dat Chu" <dattanchu@xxxxxxxxx>
• Re: raid5:md3: kernel BUG , followed by , Silent halt .
  • From: "Dan Williams" <dan.j.williams@xxxxxxxxx>
• bug in --manage mode
  • From: exe@xxxxxxxxx
• AW: Mustn't be RAID 1 and 0 read-performance be similar?
  • From: "Rustedt, Florian" <florian.rustedt@xxxxxxxxxxx>
• ANNOUNCE: mdadm 2.6.3 - A tool for managing Soft RAID under Linux
  • From: Neil Brown <neilb@xxxxxxx>
• Re: Raid5 Reshape gone wrong, please help
  • From: "Greg Nicholson" <d0gz.net@xxxxxxxxx>
• Re: Raid5 Reshape gone wrong, please help
  • From: "Greg Nicholson" <d0gz.net@xxxxxxxxx>
• Re: Raid5 Reshape gone wrong, please help
  • From: Neil Brown <neilb@xxxxxxx>
• raid5:md3: kernel BUG , followed by , Silent halt .
  • From: "Mr. James W. Laferriere" <babydr@xxxxxxxxxxxxxxxx>
• Re: Raid5 Reshape gone wrong, please help
  • From: "Greg Nicholson" <d0gz.net@xxxxxxxxx>
• Re: Raid5 Reshape gone wrong, please help
  • From: Neil Brown <neilb@xxxxxxx>
• Re: SWAP file on a RAID-10 array possible?
  • From: "Tomas France" <tomfra@xxxxxxxxxx>
• RE: RAID6 clean?
  • From: "Guy Watkins" <linux-raid@xxxxxxxxxxxxxxxx>
• Raid5 Reshape gone wrong, please help
  • From: "Greg Nicholson" <d0gz.net@xxxxxxxxx>
• Re: detecting read errors after RAID1 check operation
  • From: Mike Accetta <maccetta@xxxxxxxxxxxxxxxxxx>
• Re: MD Raid5 rebuild problems - md: sde has invalid sb, not importing!
  • From: rdc <denrdc@xxxxxxxxx>
• Re: detecting read errors after RAID1 check operation
  • From: Neil Brown <neilb@xxxxxxx>
• Re: MD Raid5 rebuild problems - md: sde has invalid sb, not importing!
  • From: Neil Brown <neilb@xxxxxxx>
• MD Raid5 rebuild problems - md: sde has invalid sb, not importing!
  • From: rdc <denrdc@xxxxxxxxx>
• [RFC] Additional info on mdadm 'check'
  • From: Bill Davidsen <davidsen@xxxxxxx>
• Re: detecting read errors after RAID1 check operation
  • From: Mike Accetta <maccetta@xxxxxxxxxxxxxxxxxx>
• [PATCH 002 of 2] md: Correctly update sysfs when a raid1 is reshaped.
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH 001 of 2] md: Make sure a re-add after a restart honours bitmap when resyncing.
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH 000 of 2] md: bug fixes for 2.6.23-rc
  • From: NeilBrown <neilb@xxxxxxx>
• Re: detecting read errors after RAID1 check operation
  • From: Neil Brown <neilb@xxxxxxx>
• detecting read errors after RAID1 check operation
  • From: Mike Accetta <maccetta@xxxxxxxxxxxxxxxxxx>
• Re: SWAP file on a RAID-10 array possible?
  • From: Bill Davidsen <davidsen@xxxxxxx>
• Re: SWAP file on a RAID-10 array possible?
  • From: Michael Tokarev <mjt@xxxxxxxxxx>
• mdadm --auto=mdp on non-standard named arrays
  • From: Michal Soltys <nozo@xxxxxxxx>
• Re: Moving RAID distro
  • From: David Greaves <david@xxxxxxxxxxxx>
• Moving RAID distro
  • From: "Richard Grundy" <richguk@xxxxxxxxx>
• RE: SWAP file on a RAID-10 array possible?
  • From: "Daniel Korstad" <dan@xxxxxxxxxxx>
• Re: SWAP file on a RAID-10 array possible?
  • From: David Greaves <david@xxxxxxxxxxxx>
• Re: SWAP file on a RAID-10 array possible?
  • From: "Tomas France" <tomfra@xxxxxxxxxx>
• Re: SWAP file on a RAID-10 array possible?
  • From: David Greaves <david@xxxxxxxxxxxx>
• SWAP file on a RAID-10 array possible?
  • From: "Tomas France" <tomfra@xxxxxxxxxx>
• Re: Cannot sync RAID5 anymore - MCE problem?
  • From: Ramin <ramin.t@xxxxxxxxx>
• Re: Convert RAID1 to standard ext2
  • From: Bill Davidsen <davidsen@xxxxxxx>
• Cannot sync RAID5 anymore - MCE problem?
  • From: Ramin <ramin.t@xxxxxxxxx>
• Re: Mustn't be RAID 1 and 0 read-performance be similar?
  • From: "Mario 'BitKoenig' Holbe" <Mario.Holbe@xxxxxxxxxxxxx>
• [kj] is_power_of_2 in drivers/md/dm-raid1.c
  • From: vignesh babu <vignesh.babu@xxxxxxxxx>
• Re: [RFD] Layering: Use-Case Composers (was: DRBD - what is it, anyways? [compare with e.g. NBD + MD raid])
  • From: David Greaves <david@xxxxxxxxxxxx>
• Re: [RFD] Layering: Use-Case Composers (was: DRBD - what is it, anyways? [compare with e.g. NBD + MD raid])
  • From: Jan Engelhardt <jengelh@xxxxxxxxxxxxxxx>
• Re: [RFD] Layering: Use-Case Composers (was: DRBD - what is it, anyways? [compare with e.g. NBD + MD raid])
  • From: david@xxxxxxx
• Convert RAID1 to standard ext2
  • From: "Timothy Weaver" <timothyweaver@xxxxxxxxx>
• Re: [RFD] Layering: Use-Case Composers (was: DRBD - what is it, anyways? [compare with e.g. NBD + MD raid])
  • From: David Greaves <david@xxxxxxxxxxxx>
• Re: [RFD] Layering: Use-Case Composers (was: DRBD - what is it, anyways? [compare with e.g. NBD + MD raid])
  • From: David Greaves <david@xxxxxxxxxxxx>
• [PATCH] [442/2many] MAINTAINERS - SOFTWARE RAID (Multiple Disks) SUPPORT
  • From: joe@xxxxxxxxxxx
• Re: [RFD] Layering: Use-Case Composers (was: DRBD - what is it, anyways? [compare with e.g. NBD + MD raid])
  • From: david@xxxxxxx
• Re: [RFD] Layering: Use-Case Composers (was: DRBD - what is it, anyways? [compare with e.g. NBD + MD raid])
  • From: Paul Clements <paul.clements@xxxxxxxxxxxx>
• Re: [RFD] Layering: Use-Case Composers (was: DRBD - what is it, anyways? [compare with e.g. NBD + MD raid])
  • From: Iustin Pop <iusty@xxxxxxxxx>
• Re: [RFD] Layering: Use-Case Composers (was: DRBD - what is it, anyways? [compare with e.g. NBD + MD raid])
  • From: Jan Engelhardt <jengelh@xxxxxxxxxxxxxxx>
• Re: [RFD] Layering: Use-Case Composers (was: DRBD - what is it, anyways? [compare with e.g. NBD + MD raid])
  • From: david@xxxxxxx
• Re: [RFD] Layering: Use-Case Composers (was: DRBD - what is it, anyways? [compare with e.g. NBD + MD raid])
  • From: Al Boldi <a1426z@xxxxxxxxx>
• Re: [RFD] Layering: Use-Case Composers (was: DRBD - what is it, anyways? [compare with e.g. NBD + MD raid])
  • From: Evgeniy Polyakov <johnpol@xxxxxxxxxxx>
• Re: [RFD] Layering: Use-Case Composers (was: DRBD - what is it, anyways? [compare with e.g. NBD + MD raid])
  • From: Jan Engelhardt <jengelh@xxxxxxxxxxxxxxx>
• [RFD] Layering: Use-Case Composers (was: DRBD - what is it, anyways? [compare with e.g. NBD + MD raid])
  • From: Al Boldi <a1426z@xxxxxxxxx>
• mdadm (on partitionable arrays) and partition uevents
  • From: Michal Soltys <nozo@xxxxxxxx>
• Re: Need clarification on raid1 resync behavior with bitmap support
  • From: Neil Brown <neilb@xxxxxxx>
• Re: Another RAID level migration question
  • From: Neil Brown <neilb@xxxxxxx>
• Another RAID level migration question
  • From: Bill Davidsen <davidsen@xxxxxxx>
• Re: Mustn't be RAID 1 and 0 read-performance be similar?
  • From: Bill Davidsen <davidsen@xxxxxxx>
• Re: Mustn't be RAID 1 and 0 read-performance be similar?
  • From: Andy Smith <andy@xxxxxxxxxx>
• Mustn't be RAID 1 and 0 read-performance be similar?
  • From: "Rustedt, Florian" <florian.rustedt@xxxxxxxxxxx>
• Re: Linux RAID migration
  • From: Neil Brown <neilb@xxxxxxx>
• Re: Major incompatibility mdadm-2.5.6 mdadm-2.6.2
  • From: Neil Brown <neilb@xxxxxxx>
• Major incompatibility mdadm-2.5.6 mdadm-2.6.2
  • From: Gerald Hochegger <gerald.hochegger@xxxxxxxxxxxxx>
• Re: Linux RAID migration
  • From: "saeed bishara" <saeed.bishara@xxxxxxxxx>
• Re: Linux RAID migration
  • From: "saeed bishara" <saeed.bishara@xxxxxxxxx>
• Re: Linux RAID migration
  • From: Neil Brown <neilb@xxxxxxx>
• Re: Linux RAID migration
  • From: "saeed bishara" <saeed.bishara@xxxxxxxxx>
• Re: Linux RAID migration
  • From: Neil Brown <neilb@xxxxxxx>
• Re: mdadm and superblock format > 1
  • From: Neil Brown <neilb@xxxxxxx>
• Re: Linux RAID migration
  • From: "saeed bishara" <saeed.bishara@xxxxxxxxx>
• Re: Linux RAID migration
  • From: Tomasz Chmielewski <mangoo@xxxxxxxx>
• Re: Linux RAID migration
  • From: "saeed bishara" <saeed.bishara@xxxxxxxxx>
• Re: Linux RAID migration
  • From: Neil Brown <neilb@xxxxxxx>
• mdadm and superblock format > 1
  • From: Michal Soltys <nozo@xxxxxxxx>
• Re: Linux RAID migration
  • From: "saeed bishara" <saeed.bishara@xxxxxxxxx>
• Re: Linux RAID migration
  • From: "Tuomas Leikola" <tuomas.leikola@xxxxxxxxx>
• Linux RAID migration
  • From: "saeed bishara" <saeed.bishara@xxxxxxxxx>
• Re: [RFT] 2.6.22.1-iop1 for improved sequential write performance (stripe-queue)
  • From: "Dan Williams" <dan.j.williams@xxxxxxxxx>
• question: max TB of raid-device
  • From: Christina Braun <braun@xxxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: Need clarification on raid1 resync behavior with bitmap support
  • From: "Mike Snitzer" <snitzer@xxxxxxxxx>
• Re: [RFT] 2.6.22.1-iop1 for improved sequential write performance (stripe-queue)
  • From: "Mr. James W. Laferriere" <babydr@xxxxxxxxxxxxxxxx>
• Re: Need clarification on raid1 resync behavior with bitmap support
  • From: Neil Brown <neilb@xxxxxxx>
• Re: Need clarification on raid1 resync behavior with bitmap support
  • From: "Mike Snitzer" <snitzer@xxxxxxxxx>
• Re: Problem creating software raid - Device or resource busy.
  • From: David Greaves <david@xxxxxxxxxxxx>
• Problem creating software raid - Device or resource busy.
  • From: Basheer <subs@xxxxxxxxxxxxxxxx>
• Re: Need clarification on raid1 resync behavior with bitmap support
  • From: Neil Brown <neilb@xxxxxxx>
• Re: checkarray script
  • From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
• Re: checkarray script
  • From: "Thorsten Wolf" <T_Wolf@xxxxxxx>
• Re: checkarray script
  • From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
• checkarray script
  • From: ymerej@xxxxxxxxx
• Re: RAID6 --grow won't restart after disk failure [solved]
  • From: Colin Snover <linux-raid@xxxxxxxxxxxxx>
• Re: RAID6 --grow won't restart after disk failure
  • From: Neil Brown <neilb@xxxxxxx>
• RAID6 --grow won't restart after disk failure
  • From: Colin Snover <linux-raid@xxxxxxxxxxxxx>
• possibility of using raid5 to detect hd corruption?
  • From: ymerej@xxxxxxxxx
• Re: Software based SATA RAID-5 expandable arrays?
  • From: David Greaves <david@xxxxxxxxxxxx>
• Re: Software based SATA RAID-5 expandable arrays?
  • From: Michael <big_green_jelly_bean@xxxxxxxxx>
• Software Raid Problem - Device or resource busy.
  • From: "Basheer Noorgat" <bn@xxxxxxxxxxxxxxxx>
• Re: Is it possible to grow a RAID-10 array with mdadm?
  • From: Bill Davidsen <davidsen@xxxxxxx>
• Re: Homehost suddenly changed on some components
  • From: Bill Davidsen <davidsen@xxxxxxx>
• Re: raid-0 to raid-5 ?
  • From: Neil Brown <neilb@xxxxxxx>
• raid-0 to raid-5 ?
  • From: DrYak <blackkitty@xxxxxxxxxxx>
• [patch 08/26] md: Fix bug in error handling during raid1 repair.
  • From: Greg KH <gregkh@xxxxxxx>
• [patch 07/26] md: Fix two raid10 bugs.
  • From: Greg KH <gregkh@xxxxxxx>
• Re: bonnie++ benchmarks for ext2,ext3,ext4,jfs,reiserfs,xfs,zfs on software raid 5
  • From: Theodore Tso <tytso@xxxxxxx>
• [PATCHSET/RFC] Refactor block layer to improve support for stacked devices.
  • From: Neil Brown <neilb@xxxxxxx>
• Re: bonnie++ benchmarks for ext2,ext3,ext4,jfs,reiserfs,xfs,zfs on software raid 5
  • From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
• Re: bonnie++ benchmarks for ext2,ext3,ext4,jfs,reiserfs,xfs,zfs on software raid 5
  • From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
• Re: bonnie++ benchmarks for ext2,ext3,ext4,jfs,reiserfs,xfs,zfs on software raid 5
  • From: Dave Kleikamp <shaggy@xxxxxxxxxxxxxxxxxx>
• Re: bonnie++ benchmarks for ext2,ext3,ext4,jfs,reiserfs,xfs,zfs on software raid 5
  • From: Miklos Szeredi <miklos@xxxxxxxxxx>
• Re: bonnie++ benchmarks for ext2,ext3,ext4,jfs,reiserfs,xfs,zfs on software raid 5
  • From: Al Boldi <a1426z@xxxxxxxxx>
• Re: pata_via with software raid1: "attempt to access beyond end of device"
  • From: Cry Regarder <cry_regarder@xxxxxxxxx>
• Re: Homehost suddenly changed on some components
  • From: Max Amanshauser <linux-raid@xxxxxxxxxxxxxxxxx>
• Re: bonnie++ benchmarks for ext2,ext3,ext4,jfs,reiserfs,xfs,zfs on software raid 5
  • From: "Dan Williams" <dan.j.williams@xxxxxxxxx>
• bonnie++ benchmarks for ext2,ext3,ext4,jfs,reiserfs,xfs,zfs on software raid 5
  • From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
• Re: Is it possible to grow a RAID-10 array with mdadm?
  • From: "Tomas France" <tomfra@xxxxxxxxxx>
• Re: Is it possible to grow a RAID-10 array with mdadm?
  • From: Neil Brown <neilb@xxxxxxx>
• Re: Is it possible to grow a RAID-10 array with mdadm?
  • From: "Tomas France" <tomfra@xxxxxxxxxx>
• Re: Is it possible to grow a RAID-10 array with mdadm?
  • From: Neil Brown <neilb@xxxxxxx>
• Re: md: raid10: fix use-after-free of bio
  • From: Neil Brown <neilb@xxxxxxx>
• Re: md: raid10: fix use-after-free of bio
  • From: Maik Hampel <m.hampel@xxxxxx>
• Re: raid1 resync data direction defined?
  • From: Luca Berra <bluca@xxxxxxxxxx>
• Re: + md-raid10-fix-use-after-free-of-bio.patch added to -mm tree
  • From: Neil Brown <neilb@xxxxxxx>
• Re: RAID on partitions and partitions on RAID
  • From: Michal Soltys <nozo@xxxxxxxx>
• Is it possible to grow a RAID-10 array with mdadm?
  • From: "Tomas France" <tomfra@xxxxxxxxxx>
• Re: RAID on partitions and partitions on RAID
  • From: Cry Regarder <cry_regarder@xxxxxxxxx>
• Re: md: raid10: fix use-after-free of bio
  • From: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
• Re: RAID on partitions and partitions on RAID
  • From: Michal Soltys <nozo@xxxxxxxx>
• Re: RAID on partitions and partitions on RAID
  • From: Michal Soltys <nozo@xxxxxxxx>
• Re: how to deal with continuously getting more errors?
  • From: "jeff stern" <jas.61803+lr@xxxxxxxxx>
• RAID on partitions and partitions on RAID
  • From: Cry Regarder <cry_regarder@xxxxxxxxx>
• Homehost suddenly changed on some components
  • From: Max Amanshauser <linux-raid@xxxxxxxxxxxxxxxxx>
• [PATCH] md: handle writes to broken raid10 arrays gracefully
  • From: Arne Redlich <agr@xxxxxxxxxxxxxx>
• md: raid10: fix use-after-free of bio
  • From: Maik Hampel <m.hampel@xxxxxx>
• raid1 resync data direction defined?
  • From: Frank van Maarseveen <frankvm@xxxxxxxxxxx>
• Re: Software Raid 5, multiple raid controller disk mixup problem
  • From: Bill Davidsen <davidsen@xxxxxxx>
• Re: raid5:md3: read error corrected , followed by , Machine Check
  • From: Bill Davidsen <davidsen@xxxxxxx>
• Re: raid5:md3: read error corrected , followed by , Machine Check
  • From: "Mr. James W. Laferriere" <babydr@xxxxxxxxxxxxxxxx>
• Re: [RFH] Partition table recovery
  • From: Rene Herman <rene.herman@xxxxxxxxx>
• Re: [RFH] Partion table recovery
  • From: Rene Herman <rene.herman@xxxxxxxxx>
• Re: [RFH] Partition table recovery
  • From: Rene Herman <rene.herman@xxxxxxxxx>
• Re: raid5:md3: read error corrected , followed by , Machine Check
  • From: Bill Davidsen <davidsen@xxxxxxx>
• Re: [GIT PATCH 0/2] stripe-queue for 2.6.23 consideration
  • From: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
• Re: [RFH] Partition table recovery
  • From: Bill Davidsen <davidsen@xxxxxxx>
• Re: [RFH] Partion table recovery
  • From: Bill Davidsen <davidsen@xxxxxxx>
• Re: Consequences of Saturday's power cutoff
  • From: John David Stone <stone@xxxxxxxxxxxxxxxxx>
• Re: [RFH] Partition table recovery
  • From: Theodore Tso <tytso@xxxxxxx>
• Re: [RFH] Partition table recovery
  • From: Theodore Tso <tytso@xxxxxxx>
• Re: [RFH] Partition table recovery
  • From: Rene Herman <rene.herman@xxxxxxxxx>
• Re: [RFH] Partition table recovery
  • From: Jan-Benedict Glaw <jbglaw@xxxxxxxxxx>
• Re: Need clarification on raid1 resync behavior with bitmap support
  • From: "Mike Snitzer" <snitzer@xxxxxxxxx>
• Re: [RFH] Partition table recovery
  • From: Rene Herman <rene.herman@xxxxxxxxx>
• Re: [RFH] Partition table recovery
  • From: Jan-Benedict Glaw <jbglaw@xxxxxxxxxx>
• Re: [RFH] Partition table recovery
  • From: Rene Herman <rene.herman@xxxxxxxxx>
• Re: Need clarification on raid1 resync behavior with bitmap support
  • From: Neil Brown <neilb@xxxxxxx>
• Re: [GIT PATCH 0/2] stripe-queue for 2.6.23 consideration
  • From: Neil Brown <neilb@xxxxxxx>
• Re: [RFH] Partition table recovery
  • From: "Indan Zupancic" <indan@xxxxxx>
• Re: [RFH] Partition table recovery
  • From: Al Boldi <a1426z@xxxxxxxxx>
• Re: [RFH] Partition table recovery
  • From: Theodore Tso <tytso@xxxxxxx>
• [GIT PATCH 2/2] raid5: use stripe_queues to prioritize the "most deserving" requests (take4)
  • From: Dan Williams <dan.j.williams@xxxxxxxxx>
• [GIT PATCH 1/2] raid5: add the stripe_queue object for tracking raid io requests (take2)
  • From: Dan Williams <dan.j.williams@xxxxxxxxx>
• [GIT PATCH 0/2] stripe-queue for 2.6.23 consideration
  • From: Dan Williams <dan.j.williams@xxxxxxxxx>
• Re: [RFH] Partition table recovery
  • From: Al Boldi <a1426z@xxxxxxxxx>
• RAID and filesystem setup / tuning questions regarding specific scenario
  • From: Michal Soltys <nozo@xxxxxxxx>
• Re: raid5:md3: read error corrected , followed by , Machine Check
  • From: "Mr. James W. Laferriere" <babydr@xxxxxxxxxxxxxxxx>
• Re: pata_via with software raid1: "attempt to access beyond end of device"
  • From: Dâniel Fraga <fragabr@xxxxxxxxx>
• Re: [RFH] Partion table recovery
  • From: Willy Tarreau <w@xxxxxx>
• Re: [RFH] Partition table recovery
  • From: Rene Herman <rene.herman@xxxxxxxxx>
• Need clarification on raid1 resync behavior with bitmap support
  • From: "Mike Snitzer" <snitzer@xxxxxxxxx>
• Re: 3ware Auto-Carve Question
  • From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
• Re: 3ware Auto-Carve Question
  • From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
• 3ware Auto-Carve Question
  • From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
• Re: Partitions with == or \approx same size ?
  • From: Seb <seb@xxxxxx>
• Re: A raid in a raid.
  • From: Michael Tokarev <mjt@xxxxxxxxxx>
• Re: Partitions with == or \approx same size ?
  • From: Luca Berra <bluca@xxxxxxxxxx>
• Re: Partitions with == or \approx same size ?
  • From: Neil Brown <neilb@xxxxxxx>
• Re: Partitions with == or \approx same size ?
  • From: Seb <seb@xxxxxx>
• Re: Partitions with == or \approx same size ?
  • From: Neil Brown <neilb@xxxxxxx>
• Re: Partitions with == or \approx same size ?
  • From: Robin Hill <robin@xxxxxxxxxxxxxxx>
• Partitions with == or \approx same size ?
  • From: Seb <seb@xxxxxx>
• Re: 2.6.19-rc5: Can't get built-in raid support, modular works correctly
  • From: "J. Hart" <af804@xxxxxxx>
• Re: [RFH] Partition table recovery
  • From: Theodore Tso <tytso@xxxxxxx>
• A raid in a raid.
  • From: mullaly <mullaly@xxxxxxxxxxx>
• Re: [RFH] Partition table recovery
  • From: Rene Herman <rene.herman@xxxxxxxxx>
• Re: [RFH] Partition table recovery
  • From: Al Boldi <a1426z@xxxxxxxxx>
• Re: [RFH] Partition table recovery
  • From: Anton Altaparmakov <aia21@xxxxxxxxx>
• Re: [RFH] Partition table recovery
  • From: Jan-Benedict Glaw <jbglaw@xxxxxxxxxx>
• Re: [RFH] Partition table recovery
  • From: Al Boldi <a1426z@xxxxxxxxx>
• Re: [RFH] Partition table recovery
  • From: Al Boldi <a1426z@xxxxxxxxx>
• Re: [RFH] Partition table recovery
  • From: Al Boldi <a1426z@xxxxxxxxx>
• Re: [RFH] Partition table recovery
  • From: Al Boldi <a1426z@xxxxxxxxx>
• Re: 2.6.19-rc5: Can't get built-in raid support, modular works correctly
  • From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
• Re: [RFH] Partion table recovery
  • From: Anton Altaparmakov <aia21@xxxxxxxxx>
• Re: [RFH] Partion table recovery
  • From: Jan-Benedict Glaw <jbglaw@xxxxxxxxxx>
• Re: [RFH] Partion table recovery
  • From: Jan Engelhardt <jengelh@xxxxxxxxxxxxxxx>
• Re: [RFH] Partion table recovery
  • From: "Dave Young" <hidave.darkstar@xxxxxxxxx>
• Re: [RFH] Partion table recovery
  • From: Willy Tarreau <w@xxxxxx>
• Re: [RFH] Partion table recovery
  • From: "Dave Young" <hidave.darkstar@xxxxxxxxx>
• Re: [RFH] Partion table recovery
  • From: "Jeffrey V. Merkey" <jmerkey@xxxxxxxxxxxxxxxxxxxxx>
• Re: [RFH] Partion table recovery
  • From: "James Lamanna" <jlamanna@xxxxxxxxx>
• Re: [RFH] Partion table recovery
  • From: "Dave Young" <hidave.darkstar@xxxxxxxxx>
• [RFH] Partion table recovery
  • From: Al Boldi <a1426z@xxxxxxxxx>
• Re: pata_via with software raid1: "attempt to access beyond end of device"
  • From: Neil Brown <neilb@xxxxxxx>
• Re: pata_via with software raid1: "attempt to access beyond end of device"
  • From: Dâniel Fraga <fragabr@xxxxxxxxx>
• Re: pata_via with software raid1: "attempt to access beyond end of device"
  • From: Neil Brown <neilb@xxxxxxx>
• [RFT] 2.6.22.1-iop1 for improved sequential write performance (stripe-queue)
  • From: "Dan Williams" <dan.j.williams@xxxxxxxxx>
• Re: pata_via with software raid1: "attempt to access beyond end of device"
  • From: Dâniel Fraga <fragabr@xxxxxxxxx>
• Re: 2.6.19-rc5: Can't get built-in raid support, modular works correctly
  • From: "J. Hart" <af804@xxxxxxx>
• Re: Slow Soft-RAID 5 performance
  • From: Rui Santos <rsantos@xxxxxxxxxxxx>
• Re: 2.6.19-rc5: Can't get built-in raid support, modular works correctly
  • From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
• Re: Slow Soft-RAID 5 performance
  • From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
• 2.6.19-rc5: Can't get built-in raid support, modular works correctly
  • From: "J. Hart" <af804@xxxxxxx>
• Re: Slow Soft-RAID 5 performance
  • From: Lars Schimmer <l.schimmer@xxxxxxxxxxxxx>
• Re: asynchronous write
  • From: Neil Brown <neilb@xxxxxxx>
• Re: Possible data corruption sata_sil24?
  • From: Tejun Heo <htejun@xxxxxxxxx>
• The surprise has come on your mail box! iafKEQ
  • From: "Mike " <diorit-expert@xxxxxxx>
• Re: pata_via with software raid1: "attempt to access beyond end of device"
  • From: Neil Brown <neilb@xxxxxxx>
• pata_via with software raid1: "attempt to access beyond end of device"
  • From: Dâniel Fraga <fragabr@xxxxxxxxx>
• Re: how to deal with continuously getting more errors?
  • From: Neil Brown <neilb@xxxxxxx>
• Re: Raid array is not automatically detected.
  • From: Neil Brown <neilb@xxxxxxx>
• Re: Raid array is not automatically detected.
  • From: Bill Davidsen <davidsen@xxxxxxx>
• Re: Software RAID5 Horrible Write Speed On 3ware Controller!!
  • From: "Bryan J. Smith" <b.j.smith@xxxxxxxx>
• Re: Software RAID5 Horrible Write Speed On 3ware Controller!!
  • From: "Bryan J. Smith" <b.j.smith@xxxxxxxx>
• Re: Slow Soft-RAID 5 performance
  • From: Rui Santos <rsantos@xxxxxxxxxxxx>
• Re: Software RAID5 Horrible Write Speed On 3ware Controller!!
  • From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
• Re: Raid array is not automatically detected.
  • From: Bryan Christ <bryan.christ@xxxxxx>
• Re: Raid array is not automatically detected.
  • From: David Greaves <david@xxxxxxxxxxxx>
• Re: Raid array is not automatically detected.
  • From: Bryan Christ <bryan.christ@xxxxxx>
• Re: Software RAID5 Horrible Write Speed On 3ware Controller!!
  • From: Gabor Gombas <gombasg@xxxxxxxxx>
• Re: Software RAID5 Horrible Write Speed On 3ware Controller!!
  • From: Hannes Dorbath <light@xxxxxxxxxxxxxxxxxxxx>
• Re: Software RAID5 Horrible Write Speed On 3ware Controller!!
  • From: Sander <sander@xxxxxxxxxxx>
• Re: Software RAID5 Horrible Write Speed On 3ware Controller!!
  • From: Robin Hill <robin@xxxxxxxxxxxxxxx>
• Re: Possible data corruption sata_sil24?
  • From: David Shaw <dshaw@xxxxxxxxxxxxxxx>
• Re: [PATCH] block: factor out bio_check_eod()
  • From: Tejun Heo <htejun@xxxxxxxxx>
• Re: [PATCH] block: factor out bio_check_eod()
  • From: Jens Axboe <jens.axboe@xxxxxxxxxx>
• Re: Software RAID5 Horrible Write Speed On 3ware Controller!!
  • From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
• Re: Software RAID5 Horrible Write Speed On 3ware Controller!!
  • From: Sander <sander@xxxxxxxxxxx>
• Re: Software RAID5 Horrible Write Speed On 3ware Controller!!
  • From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
• Re: [PATCH] block: factor out bio_check_eod()
  • From: Jens Axboe <jens.axboe@xxxxxxxxxx>
• Re: Software RAID5 Horrible Write Speed On 3ware Controller!!
  • From: Giuseppe Ghibò <ghibo@xxxxxxxxxxxx>
• Re: [PATCH] block: factor out bio_check_eod()
  • From: Jens Axboe <jens.axboe@xxxxxxxxxx>
• Re: [PATCH] block: factor out bio_check_eod()
  • From: Tejun Heo <htejun@xxxxxxxxx>
• Re: Software RAID5 Horrible Write Speed On 3ware Controller!!
  • From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
• Re: Software RAID5 Horrible Write Speed On 3ware Controller!!
  • From: Hannes Dorbath <light@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] block: factor out bio_check_eod()
  • From: Jens Axboe <jens.axboe@xxxxxxxxxx>
• Re: Software RAID5 Horrible Write Speed On 3ware Controller!!
  • From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
• Re: Software RAID5 Horrible Write Speed On 3ware Controller!!
  • From: Sander <sander@xxxxxxxxxxx>
• Re: [PATCH] block: factor out bio_check_eod()
  • From: Tejun Heo <htejun@xxxxxxxxx>
• Re: Software RAID5 Horrible Write Speed On 3ware Controller!!
  • From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
• Re: [PATCH] block: factor out bio_check_eod()
  • From: Jens Axboe <jens.axboe@xxxxxxxxxx>
• Re: Software RAID5 Horrible Write Speed On 3ware Controller!!
  • From: Hannes Dorbath <light@xxxxxxxxxxxxxxxxxxxx>
• Re: Software RAID5 Horrible Write Speed On 3ware Controller!!
  • From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
• Re: Software RAID5 Horrible Write Speed On 3ware Controller!!
  • From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
• Re: [PATCH] block: factor out bio_check_eod()
  • From: Tejun Heo <htejun@xxxxxxxxx>
• Re: Software RAID5 Horrible Write Speed On 3ware Controller!!
  • From: Gabor Gombas <gombasg@xxxxxxxxx>
• Re: [PATCH] block: factor out bio_check_eod()
  • From: Jens Axboe <jens.axboe@xxxxxxxxxx>
• [PATCH] block: factor out bio_check_eod()
  • From: Tejun Heo <htejun@xxxxxxxxx>
• Re: Software RAID5 Horrible Write Speed On 3ware Controller!!
  • From: Al Boldi <a1426z@xxxxxxxxx>
• [PATCH] block: cosmetic changes
  • From: Tejun Heo <htejun@xxxxxxxxx>
• Re: Slow Soft-RAID 5 performance
  • From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
• Software RAID5 Horrible Write Speed On 3ware Controller!!
  • From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
• Slow Soft-RAID 5 performance
  • From: Rui Santos <rsantos@xxxxxxxxxxxx>
• Re: Possible data corruption sata_sil24?
  • From: Tejun Heo <htejun@xxxxxxxxx>
• Re: Raid array is not automatically detected.
  • From: David Greaves <david@xxxxxxxxxxxx>
• asynchronous write
  • From: "Peter T. Breuer" <ptb@xxxxxxxxxxxxxx>
• Re: Raid array is not automatically detected.
  • From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
• Re: Raid array is not automatically detected.
  • From: dean gaudet <dean@xxxxxxxxxx>
• Software Raid 5, multiple raid controller disk mixup problem
  • From: Tobias Rehn <tr@xxxxxxxxxx>
• Re: raid5:md3: read error corrected , followed by , Machine Check
  • From: Andrew Burgess <aab@xxxxxxxxxxx>
• Re: Software RAID across multiple SATA host controllers - OK?
  • From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
• Re: 3ware 9650 tips
  • From: David Chinner <dgc@xxxxxxx>
• Software RAID across multiple SATA host controllers - OK?
  • From: Greg Neumarke <greg.neumarke@xxxxxxxxxxxxx>
• Re: raid5:md3: read error corrected , followed by , Machine Check Exception: .
  • From: Rogier Wolff <R.E.Wolff@xxxxxxxxxxxx>
• RE: Software based SATA RAID-5 expandable arrays?
  • From: "Daniel Korstad" <dan@xxxxxxxxxxx>
• Re: [RFC] VFS: data=ordered (was: [Advocacy] Re: 3ware 9650 tips)
  • From: Matthew Wilcox <matthew@xxxxxx>
• Re: [Advocacy] Re: 3ware 9650 tips
  • From: "Bryan J. Smith" <b.j.smith@xxxxxxxx>
• [RFC] VFS: data=ordered (was: [Advocacy] Re: 3ware 9650 tips)
  • From: Al Boldi <a1426z@xxxxxxxxx>
• Re: 3ware 9650 tips
  • From: Stuart Levy <slevy@xxxxxxxxxxxxx>
• Re: [Advocacy] Re: 3ware 9650 tips
  • From: Matthew Wilcox <matthew@xxxxxx>
• Re: Software based SATA RAID-5 expandable arrays?
  • From: Michael <big_green_jelly_bean@xxxxxxxxx>
• [Advocacy] Re: 3ware 9650 tips
  • From: "Bryan J. Smith" <b.j.smith@xxxxxxxx>
• Re: 3ware 9650 tips
  • From: Eric Sandeen <sandeen@xxxxxxxxxxx>
• Re: Raid array is not automatically detected.
  • From: David Greaves <david@xxxxxxxxxxxx>
• Re: 3ware 9650 tips
  • From: Joshua Baker-LePain <jlb17@xxxxxxxx>
• Re: Raid array is not automatically detected.
  • From: Bryan Christ <bryan.christ@xxxxxx>
• RE: Software based SATA RAID-5 expandable arrays?
  • From: "Daniel Korstad" <dan@xxxxxxxxxxx>
• MD RAID 5- EXT3-fs: group descriptors corrupted !
  • From: "Ashutosh Naik" <ashutosh.naik@xxxxxxxxx>
• Re: 3ware 9650 tips
  • From: Bernd Schubert <bs@xxxxxxxxx>
• Re: 3ware 9650 tips
  • From: David Chinner <dgc@xxxxxxx>
• Re: 3ware 9650 tips
  • From: David Chinner <dgc@xxxxxxx>
• Re: FC7 install still lacks a feature
  • From: Bill Davidsen <davidsen@xxxxxxx>
• Re: raid5:md3: read error corrected , followed by , Machine Check Exception: .
  • From: "Mr. James W. Laferriere" <babydr@xxxxxxxxxxxxxxxx>
• Re: raid5:md3: read error corrected , followed by , Machine Check Exception: .
  • From: Alan Cox <alan@xxxxxxxxxxxxxxxxxxx>
• Re: raid5:md3: read error corrected , followed by , Machine Check Exception: .
  • From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
• raid5:md3: read error corrected , followed by , Machine Check Exception: .
  • From: "Mr. James W. Laferriere" <babydr@xxxxxxxxxxxxxxxx>
• FC7 install still lacks a feature
  • From: Bill Davidsen <davidsen@xxxxxxx>
• Re: how to deal with continuously getting more errors?
  • From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
• how to deal with continuously getting more errors?
  • From: "jeff stern" <jas.61803+lr@xxxxxxxxx>
• Re: Raid array is not automatically detected.
  • From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
• Re: Raid array is not automatically detected.
  • From: Bill Davidsen <davidsen@xxxxxxx>
• Re: 3ware 9650 tips
  • From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
• Re: 3ware 9650 tips
  • From: Andrew Klaassen <clawsoon@xxxxxxxxx>
• Re: 3ware 9650 tips
  • From: Andrew Klaassen <clawsoon@xxxxxxxxx>
• Re: 3ware 9650 tips
  • From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
• Re: 3ware 9650 tips
  • From: Andrew Klaassen <clawsoon@xxxxxxxxx>
• Re: Software based SATA RAID-5 expandable arrays?
  • From: Bill Davidsen <davidsen@xxxxxxx>
• Re: Raid array is not automatically detected.
  • From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
• Re: Raid array is not automatically detected.
  • From: Bill Davidsen <davidsen@xxxxxxx>
• Re: 3ware 9650 tips
  • From: Mikael Abrahamsson <swmike@xxxxxxxxx>
• Re: 3ware 9650 tips
  • From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
• Re: Raid array is not automatically detected.
  • From: Bryan Christ <bryan.christ@xxxxxx>
• Re: 3ware 9650 tips
  • From: Andrew Klaassen <clawsoon@xxxxxxxxx>
• Re: Raid array is not automatically detected.
  • From: Zivago Lee <z@xxxxxxxx>
• Re: [-mm PATCH 0/2] 74% decrease in dispatched writes, stripe-queue take3
  • From: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
• Re: 3ware 9650 tips
  • From: Michael Tokarev <mjt@xxxxxxxxxx>
• RE: [-mm PATCH 0/2] 74% decrease in dispatched writes, stripe-queue take3
  • From: "Williams, Dan J" <dan.j.williams@xxxxxxxxx>
• Re: [-mm PATCH 0/2] 74% decrease in dispatched writes, stripe-queue take3
  • From: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
• RE: [-mm PATCH 0/2] 74% decrease in dispatched writes, stripe-queue take3
  • From: "Williams, Dan J" <dan.j.williams@xxxxxxxxx>