Re: Linear RAID hot grow

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Monday August 20, dattanchu@xxxxxxxxx wrote:
> I am currently running 2.6.22.1 kernel with mdadm version 2.6.2.

That combination should work.

> 
> When I try to run
> mdadm --grow /dev/md2 --add /dev/sdd1
> mdadm: Cannot add new disk to this array

Odd.  I tried add a drive to a three-drive linear array and it
worked, though my drives are somewhat smaller than yours - that
shouldn't matter though.

Do you get any kernel messages at the time when you try to add?
  dmesg | tail -20

NeilBrown
-
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux RAID Wiki]     [ATA RAID]     [Linux SCSI Target Infrastructure]     [Linux Block]     [Linux IDE]     [Linux SCSI]     [Linux Hams]     [Device Mapper]     [Device Mapper Cryptographics]     [Kernel]     [Linux Admin]     [Linux Net]     [GFS]     [RPM]     [git]     [Yosemite Forum]


  Powered by Linux