I have a 3ware 7500-4 and use 3 wd 120 gb hds. I had a problem with 1 drive failing, i guess i should consider myself lucky. It always used to go through rebuild. But then I moved it from the test site to its permenany location and suddently the problem disappeared. If you need any info from my systerm to troubleshoot/compare let me know. I run Slackware 9.0 2.4.20. Let me know if you find out anything. Farkas Levente <lfarkas@bnap.hu> said: > hi, > we've got a server with 3ware 7500-8 card and 8 pieces of 120GB maxtor > hd. we use 7 of them in a software raid5 array and one spare disk on a > fully updated rh 8.0 (kernel 2.4.20-18.8). it seems today at the same > time 2 of the 7 disk are failed. it's strange that two disk failed at > the same time. so I've got two problem: > - the kernel crashed > - after we reset the machine we can't reconstruct the array since 2 of > the 7 disk failed. after we run matrox's test one of the disk is realy > bad, but the second seems does not have any phisical error. we replace > the wrong hd. but keep the second in place. is there any way to mark > this second hd as NOT faulty? in this case I can save my date otherwise > 500gb date are lost. is there any trick or dirty way to try to recover > the array? > thank you for you help in advance. > yours. > > here is the message log and at the and you can see the kernel panic: > ---------------------------------------------------------- > Jun 19 16:10:49 black kernel: 3w-xxxx: scsi0: Command failed: status = > 0xc7, flags = 0x7f, unit #3. > Jun 19 16:10:49 black kernel: 3w-xxxx: scsi0: Reset succeeded. > Jun 19 16:12:55 black kernel: 3w-xxxx: scsi0: Command failed: status = > 0xc7, flags = 0x25, unit #2. > Jun 19 16:12:55 black kernel: 3w-xxxx: scsi0: Reset succeeded. > Jun 19 16:24:46 black kernel: 3w-xxxx: scsi0: Command failed: status = > 0xc7, flags = 0x1b, unit #3. > Jun 19 16:24:46 black kernel: 3w-xxxx: scsi0: Command failed: status = > 0xc7, flags = 0x1b, unit #3. > Jun 19 16:24:46 black kernel: 3w-xxxx: scsi0: Command failed: status = > 0xc7, flags = 0x1b, unit #2. > Jun 19 16:24:46 black kernel: 3w-xxxx: scsi0: Command failed: status = > 0xc7, flags = 0x1b, unit #2. > Jun 19 16:24:46 black kernel: 3w-xxxx: scsi0: Command failed: status = > 0xc7, flags = 0x1b, unit #3. > Jun 19 16:24:46 black kernel: 3w-xxxx: scsi0: Command failed: status = > 0xc7, flags = 0x1b, unit #3. > Jun 19 16:24:47 black kernel: 3w-xxxx: scsi0: Command failed: status = > 0xc7, flags = 0x1b, unit #2. > Jun 19 16:24:47 black last message repeated 2 times > Jun 19 16:24:47 black kernel: 3w-xxxx: scsi0: Command failed: status = > 0xc7, flags = 0x1b, unit #3. > Jun 19 16:24:47 black last message repeated 3 times > Jun 19 16:24:47 black kernel: 3w-xxxx: scsi0: Command failed: status = > 0xc7, flags = 0x1b, unit #2. > Jun 19 16:24:47 black kernel: 3w-xxxx: scsi0: Command failed: status = > 0xc7, flags = 0x1b, unit #3. > Jun 19 16:24:47 black kernel: 3w-xxxx: scsi0: Command failed: status = > 0xc7, flags = 0x1b, unit #2. > Jun 19 16:24:48 black last message repeated 3 times > Jun 19 16:24:48 black kernel: 3w-xxxx: scsi0: Reset succeeded. > Jun 19 16:25:23 black kernel: 3w-xxxx: scsi0: Command failed: status = > 0xc7, flags = 0x1b, unit #2. > Jun 19 16:25:23 black kernel: scsi: device set offline - not ready or > command retry failed after host reset: host 0 channel 0 id 2 lun 0 > Jun 19 16:25:26 black kernel: 3w-xxxx: scsi0: AEN: WARNING: ATA port > timeout: Port #2. > Jun 19 16:25:52 black kernel: 3w-xxxx: scsi0: Command failed: status = > 0xc7, flags = 0x1b, unit #2. > Jun 19 16:25:52 black kernel: scsi: device set offline - not ready or > command retry failed after host reset: host 0 channel 0 id 2 lun 0 > Jun 19 16:25:55 black kernel: 3w-xxxx: scsi0: AEN: WARNING: ATA port > timeout: Port #2. > Jun 19 16:26:21 black kernel: 3w-xxxx: scsi0: Command failed: status = > 0xc7, flags = 0x1b, unit #2. > Jun 19 16:26:21 black kernel: scsi: device set offline - not ready or > command retry failed after host reset: host 0 channel 0 id 2 lun 0 > Jun 19 16:26:24 black kernel: 3w-xxxx: scsi0: AEN: WARNING: ATA port > timeout: Port #2. > Jun 19 16:26:50 black kernel: 3w-xxxx: scsi0: Command failed: status = > 0xc7, flags = 0x1b, unit #2. > Jun 19 16:26:50 black kernel: scsi: device set offline - not ready or > command retry failed after host reset: host 0 channel 0 id 2 lun 0 > Jun 19 16:26:53 black kernel: 3w-xxxx: scsi0: AEN: WARNING: ATA port > timeout: Port #2. > Jun 19 16:27:19 black kernel: 3w-xxxx: scsi0: Command failed: status = > 0xc7, flags = 0x1b, unit #2. > Jun 19 16:27:19 black kernel: scsi: device set offline - not ready or > command retry failed after host reset: host 0 channel 0 id 2 lun 0 > Jun 19 16:27:22 black kernel: 3w-xxxx: scsi0: AEN: WARNING: ATA port > timeout: Port #2. > Jun 19 16:27:48 black kernel: 3w-xxxx: scsi0: Command failed: status = > 0xc7, flags = 0x1b, unit #2. > Jun 19 16:27:48 black kernel: scsi: device set offline - not ready or > command retry failed after host reset: host 0 channel 0 id 2 lun 0 > Jun 19 16:27:52 black kernel: 3w-xxxx: scsi0: AEN: WARNING: ATA port > timeout: Port #2. > Jun 19 16:28:17 black kernel: 3w-xxxx: scsi0: Command failed: status = > 0xc7, flags = 0x1b, unit #2. > Jun 19 16:28:17 black kernel: scsi: device set offline - not ready or > command retry failed after host reset: host 0 channel 0 id 2 lun 0 > Jun 19 16:28:21 black kernel: 3w-xxxx: scsi0: AEN: WARNING: ATA port > timeout: Port #2. > Jun 19 16:28:46 black kernel: 3w-xxxx: scsi0: Command failed: status = > 0xc7, flags = 0x1b, unit #2. > Jun 19 16:28:46 black kernel: scsi: device set offline - not ready or > command retry failed after host reset: host 0 channel 0 id 2 lun 0 > Jun 19 16:28:50 black kernel: 3w-xxxx: scsi0: AEN: WARNING: ATA port > timeout: Port #2. > Jun 19 16:29:15 black kernel: 3w-xxxx: scsi0: Command failed: status = > 0xc7, flags = 0x1b, unit #2. > Jun 19 16:29:15 black kernel: scsi: device set offline - not ready or > command retry failed after host reset: host 0 channel 0 id 2 lun 0 > Jun 19 16:29:19 black kernel: 3w-xxxx: scsi0: AEN: WARNING: ATA port > timeout: Port #2. > Jun 19 16:29:48 black kernel: I/O error: dev 08:21, sector 26488 > Jun 19 16:29:48 black kernel: raid5: Disk failure on sdc1, disabling > device. Operation continuing on 6 devices > Jun 19 16:29:48 black kernel: I/O error: dev 08:21, sector 120200632 > Jun 19 16:29:48 black kernel: SCSI disk error : host 0 channel 0 id 2 > lun 0 return code = 2 > Jun 19 16:29:48 black kernel: I/O error: dev 08:21, sector 120200704 > Jun 19 16:29:48 black kernel: I/O error: dev 08:21, sector 120200712 > Jun 19 16:29:48 black kernel: SCSI disk error : host 0 channel 0 id 2 > lun 0 return code = 2 > Jun 19 16:29:48 black kernel: I/O error: dev 08:21, sector 120200448 > Jun 19 16:29:48 black kernel: I/O error: dev 08:21, sector 120200456 > Jun 19 16:29:48 black kernel: SCSI disk error : host 0 channel 0 id 2 > lun 0 return code = 2 > Jun 19 16:29:48 black kernel: I/O error: dev 08:21, sector 120200576 > Jun 19 16:29:48 black kernel: SCSI disk error : host 0 channel 0 id 2 > lun 0 return code = 2 > Jun 19 16:29:48 black kernel: I/O error: dev 08:21, sector 120201328 > Jun 19 16:29:48 black kernel: SCSI disk error : host 0 channel 0 id 2 > lun 0 return code = 2 > Jun 19 16:29:48 black kernel: I/O error: dev 08:21, sector 120200608 > Jun 19 16:29:48 black kernel: SCSI disk error : host 0 channel 0 id 2 > lun 0 return code = 2 > Jun 19 16:29:48 black kernel: I/O error: dev 08:21, sector 120200488 > Jun 19 16:29:48 black kernel: I/O error: dev 08:21, sector 120200496 > Jun 19 16:29:48 black kernel: SCSI disk error : host 0 channel 0 id 2 > lun 0 return code = 2 > Jun 19 16:29:48 black kernel: I/O error: dev 08:21, sector 120200960 > Jun 19 16:29:48 black kernel: I/O error: dev 08:21, sector 120200968 > Jun 19 16:29:48 black kernel: SCSI disk error : host 0 channel 0 id 2 > lun 0 return code = 2 > Jun 19 16:29:48 black kernel: I/O error: dev 08:21, sector 120200592 > Jun 19 16:29:48 black kernel: SCSI disk error : host 0 channel 0 id 2 > lun 0 return code = 2 > Jun 19 16:29:48 black kernel: I/O error: dev 08:21, sector 120200640 > Jun 19 16:29:48 black kernel: I/O error: dev 08:21, sector 120200648 > Jun 19 16:29:48 black kernel: SCSI disk error : host 0 channel 0 id 2 > lun 0 return code = 2 > Jun 19 16:29:48 black kernel: I/O error: dev 08:21, sector 120200624 > Jun 19 16:29:48 black kernel: md: updating md0 RAID superblock on device > Jun 19 16:29:48 black kernel: md: sdh1 [events: 0000001a]<6>(write) > sdh1's sb offset: 120053632 > Jun 19 16:29:48 black kernel: md: recovery thread got woken up ... > Jun 19 16:29:48 black kernel: md0: resyncing spare disk sdh1 to replace > failed disk > Jun 19 16:29:48 black kernel: RAID5 conf printout: > Jun 19 16:29:48 black kernel: --- rd:7 wd:6 fd:1 > Jun 19 16:29:48 black kernel: disk 0, s:0, o:1, n:0 rd:0 us:1 dev:sda1 > Jun 19 16:29:48 black kernel: disk 1, s:0, o:1, n:1 rd:1 us:1 dev:sdb1 > Jun 19 16:29:48 black kernel: disk 2, s:0, o:0, n:2 rd:2 us:1 dev:sdc1 > Jun 19 16:29:48 black kernel: disk 3, s:0, o:1, n:3 rd:3 us:1 dev:sdd1 > Jun 19 16:29:48 black kernel: disk 4, s:0, o:1, n:4 rd:4 us:1 dev:sde1 > Jun 19 16:29:48 black kernel: disk 5, s:0, o:1, n:5 rd:5 us:1 dev:sdf1 > Jun 19 16:29:48 black kernel: disk 6, s:0, o:1, n:6 rd:6 us:1 dev:sdg1 > Jun 19 16:29:48 black kernel: RAID5 conf printout: > Jun 19 16:29:48 black kernel: --- rd:7 wd:6 fd:1 > Jun 19 16:29:48 black kernel: disk 0, s:0, o:1, n:0 rd:0 us:1 dev:sda1 > Jun 19 16:29:48 black kernel: disk 1, s:0, o:1, n:1 rd:1 us:1 dev:sdb1 > Jun 19 16:29:48 black kernel: disk 2, s:0, o:0, n:2 rd:2 us:1 dev:sdc1 > Jun 19 16:29:48 black kernel: disk 3, s:0, o:1, n:3 rd:3 us:1 dev:sdd1 > Jun 19 16:29:48 black kernel: disk 4, s:0, o:1, n:4 rd:4 us:1 dev:sde1 > Jun 19 16:29:48 black kernel: disk 5, s:0, o:1, n:5 rd:5 us:1 dev:sdf1 > Jun 19 16:29:48 black kernel: disk 6, s:0, o:1, n:6 rd:6 us:1 dev:sdg1 > Jun 19 16:29:48 black kernel: md: syncing RAID array md0 > Jun 19 16:29:48 black kernel: md: minimum _guaranteed_ reconstruction > speed: 100 KB/sec/disc. > Jun 19 16:29:48 black kernel: md: using maximum available idle IO > bandwith (but not more than 10000 KB/sec) for reconstruction. > Jun 19 16:29:48 black kernel: md: using 124k window, over a total of > 120053632 blocks. > Jun 19 16:29:48 black kernel: md: sdg1 [events: 0000001a]<6>(write) > sdg1's sb offset: 120053632 > Jun 19 16:29:48 black kernel: 3w-xxxx: scsi0: Command failed: status = > 0xc7, flags = 0x1, unit #3. > Jun 19 16:29:48 black kernel: 3w-xxxx: scsi0: Command failed: status = > 0xc7, flags = 0x1, unit #3. > Jun 19 16:29:51 black kernel: 3w-xxxx: scsi0: AEN: ERROR: Drive error: > Port #3. > Jun 19 16:29:51 black kernel: md: sdf1 [events: 0000001a]<6>(write) > sdf1's sb offset: 120053632 > Jun 19 16:29:51 black kernel: 3w-xxxx: scsi0: Command failed: status = > 0xc7, flags = 0x80, unit #3. > Jun 19 16:29:55 black kernel: md: sde1 [events: 0000001a]<6>(write) > sde1's sb offset: 120053632 > Jun 19 16:29:56 black kernel: 3w-xxxx: scsi0: Command failed: status = > 0xc7, flags = 0x7f, unit #3. > Jun 19 16:29:56 black kernel: 3w-xxxx: scsi0: Reset succeeded. > Jun 19 16:30:06 black kernel: 3w-xxxx: scsi0: Command failed: status = > 0xc7, flags = 0x7f, unit #3. > Jun 19 16:30:06 black kernel: scsi: device set offline - not ready or > command retry failed after host reset: host 0 channel 0 id 3 lun 0 > Jun 19 16:30:10 black kernel: 3w-xxxx: scsi0: AEN: ERROR: Drive error: > Port #3. > Jun 19 16:30:10 black kernel: 3w-xxxx: scsi0: Command failed: status = > 0xc7, flags = 0x80, unit #3. > Jun 19 16:30:10 black kernel: scsi: device set offline - not ready or > command retry failed after host reset: host 0 channel 0 id 3 lun 0 > Jun 19 16:30:10 black kernel: SCSI disk error : host 0 channel 0 id 3 > lun 0 return code = 2 > Jun 19 16:30:10 black kernel: I/O error: dev 08:31, sector 744 > Jun 19 16:30:10 black kernel: raid5: Disk failure on sdd1, disabling > device. Operation continuing on 5 devices > Jun 19 16:30:10 black kernel: I/O error: dev 08:31, sector 752 > Jun 19 16:30:10 black kernel: SCSI disk error : host 0 channel 0 id 3 > lun 0 return code = 2 > Jun 19 16:30:10 black kernel: I/O error: dev 08:31, sector 496 > Jun 19 16:30:10 black kernel: I/O error: dev 08:31, sector 504 > Jun 19 16:30:13 black kernel: md: (skipping faulty sdd1 ) > Jun 19 16:30:13 black kernel: md: (skipping faulty sdc1 ) > Jun 19 16:30:13 black kernel: md: sdb1 [events: 0000001a]<6>(write) > sdb1's sb offset: 120060736 > Jun 19 16:30:13 black kernel: md: sda1 [events: 0000001a]<6>(write) > sda1's sb offset: 120060736 > Jun 19 16:30:13 black kernel: md: updating md0 RAID superblock on device > Jun 19 16:30:13 black kernel: md: sdh1 [events: 0000001b]<6>(write) > sdh1's sb offset: 120053632 > Jun 19 16:30:13 black kernel: md: sdg1 [events: 0000001b]<6>(write) > sdg1's sb offset: 120053632 > Jun 19 16:30:13 black kernel: md: sdf1 [events: 0000001b]<6>(write) > sdf1's sb offset: 120053632 > Jun 19 16:30:13 black kernel: md: sde1 [events: 0000001b]<6>(write) > sde1's sb offset: 120053632 > Jun 19 16:30:13 black kernel: md: (skipping faulty sdd1 ) > Jun 19 16:30:13 black kernel: md: (skipping faulty sdc1 ) > Jun 19 16:30:13 black kernel: md: sdb1 [events: 0000001b]<6>(write) > sdb1's sb offset: 120060736 > Jun 19 16:30:13 black kernel: md: sda1 [events: 0000001b]<6>(write) > sda1's sb offset: 120060736 > Jun 19 16:30:13 black kernel: md: md_do_sync() got signal ... exiting > Jun 19 16:30:13 black kernel: RAID5 conf printout: > Jun 19 16:30:13 black kernel: --- rd:7 wd:5 fd:2 > Jun 19 16:30:13 black kernel: disk 0, s:0, o:1, n:0 rd:0 us:1 dev:sda1 > Jun 19 16:30:13 black kernel: disk 1, s:0, o:1, n:1 rd:1 us:1 dev:sdb1 > Jun 19 16:30:13 black kernel: disk 2, s:0, o:0, n:2 rd:2 us:1 dev:sdc1 > Jun 19 16:30:13 black kernel: disk 3, s:0, o:0, n:3 rd:3 us:1 dev:sdd1 > Jun 19 16:30:13 black kernel: disk 4, s:0, o:1, n:4 rd:4 us:1 dev:sde1 > Jun 19 16:30:13 black kernel: disk 5, s:0, o:1, n:5 rd:5 us:1 dev:sdf1 > Jun 19 16:30:13 black kernel: disk 6, s:0, o:1, n:6 rd:6 us:1 dev:sdg1 > Jun 19 16:30:13 black kernel: RAID5 conf printout: > Jun 19 16:30:13 black kernel: --- rd:7 wd:5 fd:2 > Jun 19 16:30:13 black kernel: disk 0, s:0, o:1, n:0 rd:0 us:1 dev:sda1 > Jun 19 16:30:13 black kernel: disk 1, s:0, o:1, n:1 rd:1 us:1 dev:sdb1 > Jun 19 16:30:13 black kernel: disk 2, s:0, o:0, n:2 rd:2 us:1 dev:sdc1 > Jun 19 16:30:13 black kernel: disk 3, s:0, o:0, n:3 rd:3 us:1 dev:sdd1 > Jun 19 16:30:13 black kernel: disk 4, s:0, o:1, n:4 rd:4 us:1 dev:sde1 > Jun 19 16:30:13 black kernel: disk 5, s:0, o:1, n:5 rd:5 us:1 dev:sdf1 > Jun 19 16:30:13 black kernel: disk 6, s:0, o:1, n:6 rd:6 us:1 dev:sdg1 > Jun 19 16:30:13 black kernel: md: recovery thread got woken up ... > Jun 19 16:30:13 black kernel: md0: resyncing spare disk sdh1 to replace > failed disk > Jun 19 16:30:13 black kernel: RAID5 conf printout: > Jun 19 16:30:13 black kernel: --- rd:7 wd:5 fd:2 > Jun 19 16:30:13 black kernel: disk 0, s:0, o:1, n:0 rd:0 us:1 dev:sda1 > Jun 19 16:30:13 black kernel: disk 1, s:0, o:1, n:1 rd:1 us:1 dev:sdb1 > Jun 19 16:30:13 black kernel: disk 2, s:0, o:0, n:2 rd:2 us:1 dev:sdc1 > Jun 19 16:30:13 black kernel: disk 3, s:0, o:0, n:3 rd:3 us:1 dev:sdd1 > Jun 19 16:30:13 black kernel: disk 4, s:0, o:1, n:4 rd:4 us:1 dev:sde1 > Jun 19 16:30:13 black kernel: disk 5, s:0, o:1, n:5 rd:5 us:1 dev:sdf1 > Jun 19 16:30:13 black kernel: disk 6, s:0, o:1, n:6 rd:6 us:1 dev:sdg1 > Jun 19 16:30:13 black kernel: RAID5 conf printout: > Jun 19 16:30:13 black kernel: --- rd:7 wd:5 fd:2 > Jun 19 16:30:13 black kernel: disk 0, s:0, o:1, n:0 rd:0 us:1 dev:sda1 > Jun 19 16:30:13 black kernel: disk 1, s:0, o:1, n:1 rd:1 us:1 dev:sdb1 > Jun 19 16:30:13 black kernel: disk 2, s:0, o:0, n:2 rd:2 us:1 dev:sdc1 > Jun 19 16:30:13 black kernel: disk 3, s:0, o:0, n:3 rd:3 us:1 dev:sdd1 > Jun 19 16:30:13 black kernel: disk 4, s:0, o:1, n:4 rd:4 us:1 dev:sde1 > Jun 19 16:30:13 black kernel: disk 5, s:0, o:1, n:5 rd:5 us:1 dev:sdf1 > Jun 19 16:30:13 black kernel: disk 6, s:0, o:1, n:6 rd:6 us:1 dev:sdg1 > Jun 19 16:30:13 black kernel: md: syncing RAID array md0 > Jun 19 16:30:13 black kernel: md: minimum _guaranteed_ reconstruction > speed: 100 KB/sec/disc. > Jun 19 16:30:13 black kernel: md: using maximum available idle IO > bandwith (but not more than 10000 KB/sec) for reconstruction. > Jun 19 16:30:13 black kernel: md: using 124k window, over a total of > 120053632 blocks. > Jun 19 16:30:13 black kernel: md: md_do_sync() got signal ... exiting > Jun 19 16:30:13 black kernel: RAID5 conf printout: > Jun 19 16:30:13 black kernel: --- rd:7 wd:5 fd:2 > Jun 19 16:30:13 black kernel: disk 0, s:0, o:1, n:0 rd:0 us:1 dev:sda1 > Jun 19 16:30:13 black kernel: disk 1, s:0, o:1, n:1 rd:1 us:1 dev:sdb1 > Jun 19 16:30:13 black kernel: disk 2, s:0, o:0, n:2 rd:2 us:1 dev:sdc1 > Jun 19 16:30:13 black kernel: disk 3, s:0, o:0, n:3 rd:3 us:1 dev:sdd1 > Jun 19 16:30:13 black kernel: disk 4, s:0, o:1, n:4 rd:4 us:1 dev:sde1 > Jun 19 16:30:13 black kernel: disk 5, s:0, o:1, n:5 rd:5 us:1 dev:sdf1 > Jun 19 16:30:13 black kernel: disk 6, s:0, o:1, n:6 rd:6 us:1 dev:sdg1 > Jun 19 16:30:13 black kernel: RAID5 conf printout: > Jun 19 16:30:13 black kernel: --- rd:7 wd:5 fd:2 > Jun 19 16:30:13 black kernel: disk 0, s:0, o:1, n:0 rd:0 us:1 dev:sda1 > Jun 19 16:30:13 black kernel: disk 1, s:0, o:1, n:1 rd:1 us:1 dev:sdb1 > Jun 19 16:30:13 black kernel: disk 2, s:0, o:0, n:2 rd:2 us:1 dev:sdc1 > Jun 19 16:30:13 black kernel: disk 3, s:0, o:0, n:3 rd:3 us:1 dev:sdd1 > Jun 19 16:30:13 black kernel: disk 4, s:0, o:1, n:4 rd:4 us:1 dev:sde1 > Jun 19 16:30:13 black kernel: disk 5, s:0, o:1, n:5 rd:5 us:1 dev:sdf1 > Jun 19 16:30:13 black kernel: disk 6, s:0, o:1, n:6 rd:6 us:1 dev:sdg1 > Jun 19 16:35:44 black kernel: sector=528 i=6 00000000 00000000 dde3d43c 0 > Jun 19 16:35:44 black kernel: ------------[ cut here ]------------ > Jun 19 16:35:44 black kernel: kernel BUG at raid5.c:212! > Jun 19 16:35:44 black kernel: invalid operand: 0000 > Jun 19 16:35:44 black kernel: nfs lockd sunrpc tg3 ohci1394 ieee1394 > raid5 xor mousedev keybdev hid input ehci-hcd usb-uhci usbcore ext3 jbd > 3w-xxxx sd_mod scsi_mod > Jun 19 16:35:44 black kernel: CPU: 0 > Jun 19 16:35:44 black kernel: EIP: 0010:[<f8994484>] Not tainted > Jun 19 16:35:44 black kernel: EFLAGS: 00010086 > Jun 19 16:35:44 black kernel: > Jun 19 16:35:44 black kernel: EIP is at get_active_stripe [raid5] 0x1d4 > (2.4.20-18.8) > Jun 19 16:35:44 black kernel: eax: 0000002c ebx: f72c302c ecx: > f71b2000 edx: 00000000 > Jun 19 16:35:44 black kernel: esi: 00000006 edi: f72c3000 ebp: > f7950c00 esp: f71b3d98 > Jun 19 16:35:44 black kernel: ds: 0018 es: 0018 ss: 0018 > Jun 19 16:35:44 black kernel: Process kjournald (pid: 278, > stackpage=f71b3000) > Jun 19 16:35:44 black kernel: Stack: f8997a73 00000528 00000006 00000000 > 00000000 dde3d43c 00000000 f7950c00 > Jun 19 16:35:44 black kernel: 00000000 00000001 00001000 00000296 > f724b000 00000001 00000028 f7950c00 > Jun 19 16:35:44 black kernel: 00000000 00000001 e7c7d270 f89962a8 > f7950c00 00000528 00001000 00000000 > Jun 19 16:35:44 black kernel: Call Trace: [<f8997a73>] .rodata.str1.1 > [raid5] 0x8 (0xf71b3d98)) > Jun 19 16:35:44 black kernel: [<f89962a8>] raid5_make_request [raid5] > 0x68 (0xf71b3de4)) > Jun 19 16:35:44 black kernel: [<c01e37c2>] md_make_request [kernel] 0x82 > (0xf71b3e18)) > Jun 19 16:35:44 black kernel: [<c019cbd1>] generic_make_request [kernel] > 0xe1 (0xf71b3e2c)) > Jun 19 16:35:44 black kernel: [<f883ef36>] journal_write_metadata_buffer > [jbd] 0x1e6 (0xf71b3e3c)) > Jun 19 16:35:44 black kernel: [<c019cc84>] submit_bh [kernel] 0x54 > (0xf71b3e58)) > Jun 19 16:35:44 black kernel: [<f883bb90>] journal_commit_transaction > [jbd] 0x410 (0xf71b3e70)) > Jun 19 16:35:44 black kernel: [<c0117f3f>] schedule [kernel] 0x1ef > (0xf71b3f60)) > Jun 19 16:35:44 black kernel: [<f883ec2a>] kjournald [jbd] 0x14a > (0xf71b3fb8)) > Jun 19 16:35:44 black kernel: [<f883eac0>] commit_timeout [jbd] 0x0 > (0xf71b3fd8)) > Jun 19 16:35:44 black kernel: [<c010741e>] arch_kernel_thread [kernel] > 0x2e (0xf71b3ff0)) > Jun 19 16:35:44 black kernel: [<f883eae0>] kjournald [jbd] 0x0 (0xf71b3ff8)) > Jun 19 16:35:44 black kernel: > Jun 19 16:35:44 black kernel: > Jun 19 16:35:44 black kernel: Code: 0f 0b d4 00 6b 7a 99 f8 8b 13 31 c0 > 0f b3 42 18 89 74 24 04 > ---------------------------------------------------------- > > -- > Levente "Si vis pacem para bellum!" > > > - > To unsubscribe from this list: send the line "unsubscribe linux-raid" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > -- - To unsubscribe from this list: send the line "unsubscribe linux-raid" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
