Mikael Chambon wrote:
> ========From /proc/mdstat=========
> Personalities : [raid1]
> read_ahead 1024 sectors
> md0 : active raid1 hda6[0] hdc6[1](F)
^^---- hdc6 is still is the array, it is just
marked as failed.
> 115411840 blocks [2/1] [U_]
> md2 : active raid1 hda5[0] hdc5[1]
> 532608 blocks [2/2] [UU]
> md1 : active raid1 hda3[0] hdc3[1]
> 2047680 blocks [2/2] [UU]
> md3 : active raid1 hda2[0] hdc2[1]
> 2047680 blocks [2/2] [UU]
> md4 : active raid1 hda1[0] hdc1[1]
> 20544 blocks [2/2] [UU]
> unused devices: <none>
> =============================
>
>
>
> As others hdc partitions seem to work fine, I assume there is not hardware
> problem with hdc.
You shouldn't really assume that. You really should do a test on this
partition (raid/write to it with dd, and see if the error occurs again).
> So I tried to reinsert hdc6 to md0 with: raidhotadd -a /dev/md0 /dev/hdc6
> but I get the following error:
>
> /dev/md0: can not hot-add disk: disk busy!
You'll need to remove the disk from the array, before you can add it back.
Currently, it is just marked as failed.
--
Mads Peter Bach
Systemadministrator, Det Humanistiske Fakultet, Aalborg Universitet
Kroghstræde 3 - 5.111, DK-9220 Aalborg Øst - (+45) 96358062
# whois MPB1-DK@whois.dk-hostmaster.dk
-
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
