Andrew Rechenberg <arechenberg@shermfin.com> writes:
> Check /proc/sys/dev/raid/speed_limit_[min|max]. If they are set too low
> then your re-mirror will behave as such. To change just echo a new
> value:
>
> echo 30000 > /proc/sys/dev/raid/speed_limit_min
> echo 50000 > /proc/sys/dev/raid/speed_limit_max
>
I did so - and now:
md6 : active raid1 md16[2] sdd6[0]
117185984 blocks [2/1] [U_]
[>....................] recovery = 0.1% (229120/117185984)
finish=59.5min speed=32731K/sec
:D
Thanks.
--
There are only 10 different kinds of people in the world,
those who understand binary, and those who don't.
-
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
