Thanks for you quick respond Neil ;)
> mdadm -A --force /dev/md2 /dev/sd[a-f]
So, i type this command :
# mdadm -A --force /dev/md2 /dev/sd[a-h]
mdadm: /dev/md2 has been started with 7 drives.
( i do a [a-h] , because i have 8 scsi disk )
I try too mount md2, it work fine, but :
# ls -al
ls: nohup.out: Input/output error
ls: tape.sh: Input/output error
ls: .viminfo: Input/output error
ls: .bash_history: Input/output error
ls: .bashrc~: Input/output error
ls: .xauth: Input/output error
It seem that there is many errors on the partition.
So, in good newbie, i decided too reboot the machine, but now and since one
hour, he is blocking on these lines :
[...]
md: updating md2 RAID superblock device
md: sdg [events: 000005a]<6>write sdg's sb offset 35843584
md: sdh [events: 000005a]<6>write sdh's sb offset 35843584
md: sde [events: 000005a]<6>write sde's sb offset 35843584
md: sdd [events: 000005a]<6>write sdd's sb offset 35843584
But, there is disk activity on the first one.
It's normal ? does RAID reconsctruct itsef ? if so , why did not he say that
he is doing it ?
Nicolas
-
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
