I am a bit stumped on this one, and hope somebody can suggest a way to recover it.
The user has no backup, and hopes to recover data from this array.
Assistance would be deeply appreciated.
System has 4 IDE disks on a 3Ware 4 port. RAID5.
One of the disks apparently went offline without the user noticing.
Now the array is in a read-only state.
Probable cause is that these are WD 1800GB drives, and they have not had the WD patch applied, so probably drives started going to "sleep".
I provide some (hopefully) useful information:
In mdadm --examine I see that somehow the devices 1,2,3, have now been renamed to devices 4,5,6
And that 2 devices have become designated as spares.
This really puzzles me.
The data from mdadm --examine /dev/sd[abcd]1:
/dev/sda1:
Magic : a92b4efc
Version : 00.90.00
UUID : eab4caa6:0149c628:28005703:5a107112
Creation Time : Fri Oct 18 13:49:17 2002
Raid Level : raid5
Device Size : 175823296 (167.68 GiB 180.04 GB)
Raid Devices : 4
Total Devices : 2
Preferred Minor : 0 Update Time : Fri Jun 6 10:42:12 2003
State : dirty, no-errors
Active Devices : 0
Working Devices : 2
Failed Devices : 0
Spare Devices : 3
Checksum : 9e47adf6 - correct
Events : 0.174 Layout : left-symmetric
Chunk Size : 64KNumber Major Minor RaidDevice State
this 4 8 1 4 /dev/scsi/host0/bus0/target0/lun0/part1
0 0 0 0 0 faulty removed
1 1 0 0 1 faulty removed
2 2 0 0 2 faulty removed
3 3 0 0 3 faulty removed
4 4 8 1 4 /dev/scsi/host0/bus0/target0/lun0/part1
5 5 8 33 5 /dev/scsi/host0/bus0/target2/lun0/part1
6 6 8 49 6 /dev/scsi/host0/bus0/target3/lun0/part1
/dev/sdb1:
Magic : a92b4efc
Version : 00.90.00
UUID : eab4caa6:0149c628:28005703:5a107112
Creation Time : Fri Oct 18 13:49:17 2002
Raid Level : raid5
Device Size : 175823296 (167.68 GiB 180.04 GB)
Raid Devices : 4
Total Devices : 3
Preferred Minor : 0
Update Time : Fri Jun 6 10:39:21 2003
State : dirty, no-errors
Active Devices : 0
Working Devices : 1
Failed Devices : 2
Spare Devices : 2
Checksum : 9e47ad58 - correct
Events : 0.167 Layout : left-symmetric
Chunk Size : 64KNumber Major Minor RaidDevice State
this 5 8 17 5 /dev/scsi/host0/bus0/target1/lun0/part1
0 0 8 1 0 faulty /dev/scsi/host0/bus0/target0/lun0/part1
1 1 0 0 1 faulty removed
2 2 8 33 2 faulty /dev/scsi/host0/bus0/target2/lun0/part1
3 3 0 0 3 faulty removed
4 4 8 49 4 /dev/scsi/host0/bus0/target3/lun0/part1
5 5 8 17 5 /dev/scsi/host0/bus0/target1/lun0/part1
/dev/sdc1:
Magic : a92b4efc
Version : 00.90.00
UUID : eab4caa6:0149c628:28005703:5a107112
Creation Time : Fri Oct 18 13:49:17 2002
Raid Level : raid5
Device Size : 175823296 (167.68 GiB 180.04 GB)
Raid Devices : 4
Total Devices : 2
Preferred Minor : 0
Update Time : Tue May 13 09:26:42 2003
State : clean, no-errors
Active Devices : 3
Working Devices : 2
Failed Devices : 0
Spare Devices : 0
Checksum : 9e27f82c - correct
Events : 0.174 Layout : left-symmetric
Chunk Size : 64KNumber Major Minor RaidDevice State
this 2 8 33 2 active sync /dev/scsi/host0/bus0/target2/lun0/part1
0 0 8 1 0 active sync /dev/scsi/host0/bus0/target0/lun0/part1
1 1 8 17 1 active sync /dev/scsi/host0/bus0/target1/lun0/part1
2 2 8 33 2 active sync /dev/scsi/host0/bus0/target2/lun0/part1
3 3 0 0 3 faulty removed
/dev/sdd1:
Magic : a92b4efc
Version : 00.90.00
UUID : eab4caa6:0149c628:28005703:5a107112
Creation Time : Fri Oct 18 13:49:17 2002
Raid Level : raid5
Device Size : 175823296 (167.68 GiB 180.04 GB)
Raid Devices : 4
Total Devices : 2
Preferred Minor : 0
Update Time : Fri Jun 6 10:42:12 2003
State : dirty, no-errors
Active Devices : 0
Working Devices : 2
Failed Devices : 0
Spare Devices : 3
Checksum : 9e47ae2a - correct
Events : 0.174 Layout : left-symmetric
Chunk Size : 64KNumber Major Minor RaidDevice State
this 6 8 49 6 /dev/scsi/host0/bus0/target3/lun0/part1
0 0 0 0 0 faulty removed
1 1 0 0 1 faulty removed
2 2 0 0 2 faulty removed
3 3 0 0 3 faulty removed
4 4 8 1 4 /dev/scsi/host0/bus0/target0/lun0/part1
5 5 8 33 5 /dev/scsi/host0/bus0/target2/lun0/part1
6 6 8 49 6 /dev/scsi/host0/bus0/target3/lun0/part1
Here is the contents of mdadm.conf:
DEVICE /dev/sd[abcd]1
ARRAY /dev/md0 level=raid5 num-devices=4 UUID=eab4caa6:0149c628:28005703:5a107112
Here is the relevant part of dmesg:
.changing IO-APIC physical APIC ID to 9 ... ok.
Setting 10 in the phys_id_present_map
...changing IO-APIC physical APIC ID to 10 ... ok.
Setting 11 in the phys_id_present_map
...changing IO-APIC physical APIC ID to 11 ... ok.
init IO_APIC IRQs
IO-APIC (apicid-pin) 8-0, 8-5, 8-9, 8-11, 9-0, 9-1, 9-3, 9-4, 9-5, 9-6, 9-7, 9-8, 9-9, 9-10, 9-11, 9-12, 10-0, 10-1, 10-2, 10-3, 10-4, 10-5, 10-6, 10-7, 10-8, 10-9, 10-10, 10-11, 10-12, 10-13, 10-14, 10-15, 11-0, 11-1, 11-2, 11-3, 11-4, 11-5, 11-6, 11-7, 11-8, 11-9, 11-10, 11-11, 11-12, 11-13, 11-14, 11-15 not connected.
..TIMER: vector=0x31 pin1=2 pin2=0
..MP-BIOS bug: 8254 timer not connected to IO-APIC
...trying to set up timer (IRQ0) through the 8259A ...
..... (found pin 0) ...works.
number of MP IRQ sources: 17.
number of IO-APIC #8 registers: 16.
number of IO-APIC #9 registers: 16.
number of IO-APIC #10 registers: 16.
number of IO-APIC #11 registers: 16.
testing the IO APIC.......................
IO APIC #8...... .... register #00: 08000000 ....... : physical APIC id: 08 .... register #01: 000F0011 ....... : max redirection entries: 000F ....... : PRQ implemented: 0 ....... : IO APIC version: 0011 .... register #02: 08000000 ....... : arbitration: 08 .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 00F 0F 0 0 0 0 0 1 1 31 01 00F 0F 0 0 0 0 0 1 1 39 02 000 00 1 0 0 0 0 0 0 00 03 00F 0F 0 0 0 0 0 1 1 41 04 00F 0F 0 0 0 0 0 1 1 49 05 000 00 1 0 0 0 0 0 0 00 06 00F 0F 0 0 0 0 0 1 1 51 07 00F 0F 0 0 0 0 0 1 1 59 08 00F 0F 0 0 0 0 0 1 1 61 09 000 00 1 0 0 0 0 0 0 00 0a 00F 0F 1 1 0 1 0 1 1 69 0b 000 00 1 0 0 0 0 0 0 00 0c 00F 0F 0 0 0 0 0 1 1 71 0d 00F 0F 0 0 0 0 0 1 1 79 0e 00F 0F 0 0 0 0 0 1 1 81 0f 00F 0F 0 0 0 0 0 1 1 89
IO APIC #9...... .... register #00: 09000000 ....... : physical APIC id: 09 .... register #01: 000F0011 ....... : max redirection entries: 000F ....... : PRQ implemented: 0 ....... : IO APIC version: 0011 .... register #02: 09000000 ....... : arbitration: 09 .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 000 00 1 0 0 0 0 0 0 00 01 000 00 1 0 0 0 0 0 0 00 02 00F 0F 1 1 0 1 0 1 1 91 03 000 00 1 0 0 0 0 0 0 00 04 000 00 1 0 0 0 0 0 0 00 05 000 00 1 0 0 0 0 0 0 00 06 000 00 1 0 0 0 0 0 0 00 07 000 00 1 0 0 0 0 0 0 00 08 000 00 1 0 0 0 0 0 0 00 09 000 00 1 0 0 0 0 0 0 00 0a 000 00 1 0 0 0 0 0 0 00 0b 000 00 1 0 0 0 0 0 0 00 0c 000 00 1 0 0 0 0 0 0 00 0d 00F 0F 1 1 0 1 0 1 1 99 0e 00F 0F 1 1 0 1 0 1 1 A1 0f 00F 0F 1 1 0 1 0 1 1 A9
IO APIC #10...... .... register #00: 0A000000 ....... : physical APIC id: 0A .... register #01: 000F0011 ....... : max redirection entries: 000F ....... : PRQ implemented: 0 ....... : IO APIC version: 0011 .... register #02: 0A000000 ....... : arbitration: 0A .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 000 00 1 0 0 0 0 0 0 00 01 000 00 1 0 0 0 0 0 0 00 02 000 00 1 0 0 0 0 0 0 00 03 000 00 1 0 0 0 0 0 0 00 04 000 00 1 0 0 0 0 0 0 00 05 000 00 1 0 0 0 0 0 0 00 06 000 00 1 0 0 0 0 0 0 00 07 000 00 1 0 0 0 0 0 0 00 08 000 00 1 0 0 0 0 0 0 00 09 000 00 1 0 0 0 0 0 0 00 0a 000 00 1 0 0 0 0 0 0 00 0b 000 00 1 0 0 0 0 0 0 00 0c 000 00 1 0 0 0 0 0 0 00 0d 000 00 1 0 0 0 0 0 0 00 0e 000 00 1 0 0 0 0 0 0 00 0f 000 00 1 0 0 0 0 0 0 00
IO APIC #11......
.... register #00: 0B000000
....... : physical APIC id: 0B
.... register #01: 000F0011
....... : max redirection entries: 000F
....... : PRQ implemented: 0
....... : IO APIC version: 0011
.... register #02: 0B000000
....... : arbitration: 0B
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 000 00 1 0 0 0 0 0 0 00
01 000 00 1 0 0 0 0 0 0 00
02 000 00 1 0 0 0 0 0 0 00
03 000 00 1 0 0 0 0 0 0 00
04 000 00 1 0 0 0 0 0 0 00
05 000 00 1 0 0 0 0 0 0 00
06 000 00 1 0 0 0 0 0 0 00
07 000 00 1 0 0 0 0 0 0 00
08 000 00 1 0 0 0 0 0 0 00
09 000 00 1 0 0 0 0 0 0 00
0a 000 00 1 0 0 0 0 0 0 00
0b 000 00 1 0 0 0 0 0 0 00
0c 000 00 1 0 0 0 0 0 0 00
0d 000 00 1 0 0 0 0 0 0 00
0e 000 00 1 0 0 0 0 0 0 00
0f 000 00 1 0 0 0 0 0 0 00
IRQ to pin mappings:
IRQ0 -> 0:0
IRQ1 -> 0:1
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ6 -> 0:6
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ10 -> 0:10
IRQ12 -> 0:12
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
IRQ18 -> 1:2
IRQ29 -> 1:13
IRQ30 -> 1:14
IRQ31 -> 1:15
.................................... done.
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 1999.8335 MHz.
..... host bus clock speed is 99.9915 MHz.
cpu: 0, clocks: 999915, slice: 199983
CPU0<T0:999904,T1:799920,D:1,S:199983,C:999915>
cpu: 2, clocks: 999915, slice: 199983
cpu: 3, clocks: 999915, slice: 199983
cpu: 1, clocks: 999915, slice: 199983
CPU1<T0:999904,T1:599936,D:2,S:199983,C:999915>
CPU2<T0:999904,T1:399952,D:3,S:199983,C:999915>
CPU3<T0:999904,T1:199968,D:4,S:199983,C:999915>
checking TSC synchronization across CPUs: passed.
Waiting on wait_init_idle (map = 0xe)
All processors have done init_idle
PCI: PCI BIOS revision 2.10 entry at 0xfdba1, last bus=4
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Discovered primary peer bus 01 [IRQ]
PCI: Discovered primary peer bus 02 [IRQ]
PCI: Discovered primary peer bus 03 [IRQ]
PCI: Discovered primary peer bus 04 [IRQ]
PCI->APIC IRQ transform: (B0,I2,P0) -> 29
PCI->APIC IRQ transform: (B0,I4,P0) -> 30
PCI->APIC IRQ transform: (B0,I15,P0) -> 10
PCI->APIC IRQ transform: (B1,I3,P0) -> 31
PCI->APIC IRQ transform: (B3,I2,P0) -> 18
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16)
apm: disabled - APM is not SMP safe.
Starting kswapd
allocated 32 pages and 32 bhs reserved for the highmem bounces
VFS: Diskquotas version dquot_6.5.0 initialized
devfs: v1.12a (20020514) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ServerWorks CSB5: IDE controller on PCI bus 00 dev 79
ServerWorks CSB5: chipset revision 147
ServerWorks CSB5: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio
hda: WDC WD200BB-75CAA0, ATA DISK drive
hdc: ATAPI-CD ROM-DRIVE-52MAX, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: setmax LBA 39063024, native 39062500
hda: 39062500 sectors (20000 MB) w/2048KiB Cache, CHS=2431/255/63, UDMA(33)
hdc: ATAPI 52X CD-ROM drive, 128kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.12
ide-floppy driver 0.99b
Partition check:
/dev/ide/host0/bus0/target0/lun0: p1 p2 p3 p4 < p5 p6 p7 >
RAMDISK driver initialized: 16 RAM disks of 32000K size 1024 blocksize
ide-floppy driver 0.99b
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 8192 buckets, 64Kbytes
TCP: Hash tables configured (established 262144 bind 65536)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 202k freed
EXT2-fs warning: checktime reached, running e2fsck is recommended
VFS: Mounted root (ext2 filesystem).
Mounted devfs on /dev
SCSI subsystem driver Revision: 1.00
3ware Storage Controller device driver for Linux v1.02.00.025.
scsi0 : Found a 3ware Storage Controller at 0xdfa0, IRQ: 18, P-chip: 1.3
scsi0 : 3ware Storage Controller
Vendor: 3ware Model: 3w-xxxx Rev: 1.0
Type: Direct-Access ANSI SCSI revision: 00
Vendor: 3ware Model: 3w-xxxx Rev: 1.0
Type: Direct-Access ANSI SCSI revision: 00
Vendor: 3ware Model: 3w-xxxx Rev: 1.0
Type: Direct-Access ANSI SCSI revision: 00
Vendor: 3ware Model: 3w-xxxx Rev: 1.0
Type: Direct-Access ANSI SCSI revision: 00
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
Attached scsi disk sdb at scsi0, channel 0, id 1, lun 0
Attached scsi disk sdc at scsi0, channel 0, id 2, lun 0
Attached scsi disk sdd at scsi0, channel 0, id 3, lun 0
SCSI device sda: 351651888 512-byte hdwr sectors (180046 MB)
/dev/scsi/host0/bus0/target0/lun0: p1
SCSI device sdb: 351651888 512-byte hdwr sectors (180046 MB)
/dev/scsi/host0/bus0/target1/lun0: p1
SCSI device sdc: 351651888 512-byte hdwr sectors (180046 MB)
/dev/scsi/host0/bus0/target2/lun0: p1
SCSI device sdd: 351651888 512-byte hdwr sectors (180046 MB)
/dev/scsi/host0/bus0/target3/lun0: p1
Journalled Block Device driver loaded
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Mounted devfs on /dev
Freeing unused kernel memory: 148k freed
Real Time Clock Driver v1.10e
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-ohci.c: USB OHCI at membase 0xf8867000, IRQ 10
usb-ohci.c: usb-00:0f.2, ServerWorks OSB4/CSB5 USB Controller
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 4 ports detected
usbdevfs: remount parameter error
EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,2), internal journal
Adding Swap: 1028152k swap-space (priority -1)
[events: 000000ae]
[events: 000000ae]
[events: 000000ae]
md: autorun ...
md: considering scsi/host0/bus0/target3/lun0/part1 ...
md: adding scsi/host0/bus0/target3/lun0/part1 ...
md: adding scsi/host0/bus0/target2/lun0/part1 ...
md: adding scsi/host0/bus0/target0/lun0/part1 ...
md: created md0
md: bind<scsi/host0/bus0/target0/lun0/part1,1>
md: bind<scsi/host0/bus0/target2/lun0/part1,2>
md: bind<scsi/host0/bus0/target3/lun0/part1,3>
md: running: <scsi/host0/bus0/target3/lun0/part1><scsi/host0/bus0/target2/lun0/part1><scsi/host0/bus0/target0/lun0/part1>
md: scsi/host0/bus0/target3/lun0/part1's event counter: 000000ae
md: scsi/host0/bus0/target2/lun0/part1's event counter: 000000ae
md: scsi/host0/bus0/target0/lun0/part1's event counter: 000000ae
md0: kicking faulty scsi/host0/bus0/target2/lun0/part1!
md: unbind<scsi/host0/bus0/target2/lun0/part1,2>
md: export_rdev(scsi/host0/bus0/target2/lun0/part1)
md0: former device scsi/host0/bus0/target2/lun0/part1 is unavailable, removing from array!
md: md0: raid array is not clean -- starting background reconstruction
raid5: measuring checksumming speed
8regs : 2390.400 MB/sec
32regs : 1439.600 MB/sec
pII_mmx : 2298.000 MB/sec
p5_mmx : 2352.000 MB/sec
raid5: using function: 8regs (2390.400 MB/sec)
md: raid5 personality registered as nr 4
md0: max total readahead window set to 768k
md0: 3 data-disks, max readahead per data-disk: 256k
raid5: spare disk scsi/host0/bus0/target3/lun0/part1
raid5: spare disk scsi/host0/bus0/target0/lun0/part1
raid5: not enough operational devices for md0 (4/4 failed)
RAID5 conf printout:
--- rd:4 wd:0 fd:4
disk 0, s:0, o:0, n:0 rd:0 us:1 dev:[dev 00:00]
disk 1, s:0, o:0, n:1 rd:1 us:1 dev:[dev 00:00]
disk 2, s:0, o:0, n:2 rd:2 us:1 dev:[dev 00:00]
disk 3, s:0, o:0, n:3 rd:3 us:1 dev:[dev 00:00]
raid5: failed to run raid set md0
md: pers->run() failed ...
md :do_md_run() returned -22
md: md0 stopped.
md: unbind<scsi/host0/bus0/target3/lun0/part1,1>
md: export_rdev(scsi/host0/bus0/target3/lun0/part1)
md: unbind<scsi/host0/bus0/target0/lun0/part1,0>
md: export_rdev(scsi/host0/bus0/target0/lun0/part1)
md: ... autorun DONE.
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,1), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,6), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,7), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,5), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
tg3.c:v0.99 (Jun 11, 2002)
eth0: Tigon3 [partno(BCM95700A6) rev 0105 PHY(5701)] (PCIX:100MHz:64-bit) 10/100/1000BaseT Ethernet 00:30:48:51:4f:e5
eepro100.c:v1.09j-t 9/29/99 Donald Becker http://www.scyld.com/network/eepro100.html
eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin <saw@saw.sw.com.sg> and others
eth1: OEM i82557/i82558 10/100 Ethernet, 00:30:48:51:50:B5, IRQ 30.
Board assembly 000000-000, Physical connectors present: RJ45
Primary interface chip i82555 PHY #1.
General self-test: passed.
Serial sub-system self-test: passed.
Internal registers self-test: passed.
ROM checksum self-test: passed (0xb874c1d3).
IPVS: Connection hash table configured (size=4096, memory=32Kbytes)
IPVS: Each connection entry needs 120 bytes at least
IPVS: ipvs loaded.
ip_tables: (C) 2000-2002 Netfilter core team
ip_conntrack version 2.1 (8191 buckets, 65528 max) - 300 bytes per conntrack
eth0: Link is up at 100 Mbps, full duplex.
eth0: Flow control is on for TX and on for RX.
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
parport0: irq 7 detected
lp0: using parport0 (polling).
[events: 000000ae]
md: bind<scsi/host0/bus0/target0/lun0/part1,1>
[events: 000000a7]
md: bind<scsi/host0/bus0/target1/lun0/part1,2>
[events: 000000ae]
md: bind<scsi/host0/bus0/target3/lun0/part1,3>
[events: 000000ae]
md: bind<scsi/host0/bus0/target2/lun0/part1,4>
Snippet from /var/log/messages when attempting to start the array:
Jun 6 16:41:12 afhe-shared -- root[2057]: ROOT LOGIN ON vc/2
Jun 6 16:41:43 afhe-shared kernel: [events: 000000ae]
Jun 6 16:41:43 afhe-shared kernel: md: bind<scsi/host0/bus0/target0/lun0/part1,1>
Jun 6 16:41:43 afhe-shared kernel: [events: 000000a7]
Jun 6 16:41:43 afhe-shared kernel: md: bind<scsi/host0/bus0/target1/lun0/part1,2>
Jun 6 16:41:43 afhe-shared kernel: [events: 000000ae]
Jun 6 16:41:43 afhe-shared kernel: md: bind<scsi/host0/bus0/target3/lun0/part1,3>
Jun 6 16:41:43 afhe-shared kernel: [events: 000000ae]
Jun 6 16:41:43 afhe-shared kernel: md: bind<scsi/host0/bus0/target2/lun0/part1,4>
Jun 6 16:42:14 afhe-shared ntpd[1494]: kernel time discipline status change 41
Jun 6 16:44:24 afhe-shared kernel: md: md0 stopped.
Jun 6 16:44:24 afhe-shared kernel: md: unbind<scsi/host0/bus0/target2/lun0/part1,3>
Jun 6 16:44:24 afhe-shared kernel: md: export_rdev(scsi/host0/bus0/target2/lun0/part1)
Jun 6 16:44:24 afhe-shared kernel: md: unbind<scsi/host0/bus0/target3/lun0/part1,2>
Jun 6 16:44:24 afhe-shared kernel: md: export_rdev(scsi/host0/bus0/target3/lun0/part1)
Jun 6 16:44:24 afhe-shared kernel: md: unbind<scsi/host0/bus0/target1/lun0/part1,1>
Jun 6 16:44:24 afhe-shared kernel: md: export_rdev(scsi/host0/bus0/target1/lun0/part1)
Jun 6 16:44:24 afhe-shared kernel: md: unbind<scsi/host0/bus0/target0/lun0/part1,0>
Jun 6 16:44:24 afhe-shared kernel: md: export_rdev(scsi/host0/bus0/target0/lun0/part1)
Jun 6 16:44:24 afhe-shared kernel: [events: 000000ae]
Jun 6 16:44:24 afhe-shared kernel: md: bind<scsi/host0/bus0/target0/lun0/part1,1>
Jun 6 16:44:24 afhe-shared kernel: [events: 000000a7]
Jun 6 16:44:24 afhe-shared kernel: md: bind<scsi/host0/bus0/target1/lun0/part1,2>
Jun 6 16:44:24 afhe-shared kernel: [events: 000000ae]
Jun 6 16:44:24 afhe-shared kernel: md: bind<scsi/host0/bus0/target3/lun0/part1,3>
Jun 6 16:44:24 afhe-shared kernel: [events: 000000ae]
Jun 6 16:44:24 afhe-shared kernel: md: bind<scsi/host0/bus0/target2/lun0/part1,4>
With our best regards,
Maurice W. Hilarius Telephone: 01-780-456-9771 Hard Data Ltd. FAX: 01-780-456-9772 11060 - 166 Avenue mailto:maurice@harddata.com Edmonton, AB, Canada http://www.harddata.com/ T5X 1Y3
- To unsubscribe from this list: send the line "unsubscribe linux-raid" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
