Re: Performance difference between two raid0 arrays on same drives?

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sat, 12 Jul 2003, Michel Bellais wrote:

> You're right, I thought about it too, but the fastest array is built with
> partitions closer to the centre of the disk, so it should be the slowest
> indeed.
> The disks are big (180 Gb), the partitions represent less than 10% of it and
> follow each others.  It cannot explain 30% difference in performance.
>
> I have created a third array on the disk, which is a copy of the slowest
> array. It has the same content. This last array shows much better performance
> than the original. And it is even closer to the centre...
> So i really don't understand.

Just a thought: What if modern disk manufacturers write from the inside
out, rather than traditionally from the outside in?

CD's are read from the inside out so we can have different size discs.

Or maybe the hard disk manufacturers cottoned on to the fact that most
people would benchmark freshly partitioned disks hoping the file would be
at the "start" so they make it on the inside and get a better benchmark?

Who knows! And I guess without taking one to bits to watch it work it's
going to be hard to find out...

Gordon

-
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux RAID Wiki]     [ATA RAID]     [Linux SCSI Target Infrastructure]     [Linux Block]     [Linux IDE]     [Linux SCSI]     [Linux Hams]     [Device Mapper]     [Device Mapper Cryptographics]     [Kernel]     [Linux Admin]     [Linux Net]     [GFS]     [RPM]     [git]     [Yosemite Forum]


  Powered by Linux