Linux RAID Storage Date Index

• Thread Index

• RE: md questions [forwarded from already sent mail]
  • From: "Guy" <bugzilla@xxxxxxxxxxxxxxxx>
• Re: kernel panic under 2.6.2-rc1-mm2
  • From: Jim Faulkner <jfaulkne@xxxxxxxxxxx>
• Re: md questions [forwarded from already sent mail]
  • From: Maarten van den Berg <maarten@xxxxxxxxxxxx>
• Re: md questions [forwarded from already sent mail]
  • From: Maarten van den Berg <maarten@xxxxxxxxxxxx>
• Re: kernel panic under 2.6.2-rc1-mm2
  • From: Andrew Morton <akpm@xxxxxxxx>
• kernel panic under 2.6.2-rc1-mm2
  • From: Jim Faulkner <jfaulkne@xxxxxxxxxxx>
• Re: md questions [forward of Jims corrections]
  • From: Gene Heskett <gene.heskett@xxxxxxxxxxx>
• Re: md questions [forwarded from already sent mail]
  • From: Gene Heskett <gene.heskett@xxxxxxxxxxx>
• What does "kicking non-fresh partition from array" mean?
  • From: AndyLiebman@xxxxxxx
• Re: Linux Raid confused about one drive and two arrays
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Re: Linux Raid confused about one drive and two arrays
  • From: AndyLiebman@xxxxxxx
• Re: [PATCH] declare raid6_intx32 to fix ia64 build
  • From: "H. Peter Anvin" <hpa@xxxxxxxxx>
• Re: Linux Raid confused about one drive and two arrays
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Re: [PATCH 2.6] md debug fixes
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• [PATCH] md - 2 of 7 - Move the test in preferred_minor to where it is used.
  • From: NeilBrown <neilb@xxxxxxxxxxxxxxx>
• [PATCH] md - 5 of 7 - Change the way the name of an md device is printed in error messages.
  • From: NeilBrown <neilb@xxxxxxxxxxxxxxx>
• [PATCH] md - 0 of 7 - Introduction
  • From: NeilBrown <neilb@xxxxxxxxxxxxxxx>
• [PATCH] md - 3 of 7 - Fixes to make debuging output nicer.
  • From: NeilBrown <neilb@xxxxxxxxxxxxxxx>
• [PATCH] md - 1 of 7 - Fix possible hang in raid shutdown.
  • From: NeilBrown <neilb@xxxxxxxxxxxxxxx>
• [PATCH] md - 4 of 7 - Collect device IO statistics for MD personalities.
  • From: NeilBrown <neilb@xxxxxxxxxxxxxxx>
• [PATCH] md - 6 of 7 - Allow partitioning of MD devices.
  • From: NeilBrown <neilb@xxxxxxxxxxxxxxx>
• [PATCH] md - 7 of 7 - Make sure md devices appear in /proc/partitions
  • From: NeilBrown <neilb@xxxxxxxxxxxxxxx>
• [PATCH] declare raid6_intx32 to fix ia64 build
  • From: Bjorn Helgaas <bjorn.helgaas@xxxxxx>
• [PATCH 2.6] md debug fixes
  • From: Paul Clements <Paul.Clements@xxxxxxxxxxxx>
• Re: Promise TX2-plus and kernel 2.6
  • From: Keld Jørn Simonsen <keld@xxxxxxxx>
• Re: Promise TX2-plus and kernel 2.6
  • From: Jeff Garzik <jgarzik@xxxxxxxxx>
• Re: Promise TX2-plus and kernel 2.6
  • From: Keld Jørn Simonsen <keld@xxxxxxxx>
• Re: Promise TX2-plus and kernel 2.6
  • From: Jeff Garzik <jgarzik@xxxxxxxxx>
• Linux Raid confused about one drive and two arrays
  • From: AndyLiebman@xxxxxxx
• Re: ANNOUNCE: mdadm 1.5.0 - A tool for managing Soft RAID under Linux
  • From: "H. Peter Anvin" <hpa@xxxxxxxxx>
• ANNOUNCE: mdadm 1.5.0 - A tool for managing Soft RAID under Linux
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Promise TX2-plus and kernel 2.6
  • From: Keld Jørn Simonsen <keld@xxxxxxxx>
• Re: total sector number in each disk
  • From: Ming Zhang <mingz@xxxxxxxxxxx>
• Re: VT 8237 Support?
  • From: Mark Hahn <hahn@xxxxxxxxxxxxxxxxxxx>
• total sector number in each disk
  • From: Bin Ren <br260@xxxxxxxxx>
• Re: VT 8237 Support?
  • From: Hendrik Visage <hvisage@xxxxxxxxxxxxxx>
• Getting started with linux and raid
  • From: "Steve Pfister" <srp336@xxxxxxxxxxxxxxx>
• Re: VT 8237 Support?
  • From: Ming Zhang <mingz@xxxxxxxxxxx>
• VT 8237 Support?
  • From: Andrew Hogue <hogue@xxxxxxxxxxx>
• Re: Recovering RAID5 array
  • From: Jean Jordaan <jean@xxxxxxxxxxxxxxxxxxxx>
• Re: Recovering RAID5 array
  • From: Maarten v d Berg <maarten@xxxxxxx>
• Re: Recovering RAID5 array
  • From: Jean Jordaan <jean@xxxxxxxxxxxxxxxxxxxx>
• Re: Recovering RAID5 array
  • From: Maarten v d Berg <maarten@xxxxxxx>
• Re: Recovering RAID5 array
  • From: Jean Jordaan <jean@xxxxxxxxxxxxxxxxxxxx>
• Re: Recovering RAID5 array
  • From: Jean Jordaan <jean@xxxxxxxxxxxxxxxxxxxx>
• Re: Recovering RAID5 array
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Re: Recovering RAID5 array
  • From: Jean Jordaan <jean@xxxxxxxxxxxxxxxxxxxx>
• RE: Recovering RAID5 array
  • From: "Guy" <bugzilla@xxxxxxxxxxxxxxxx>
• Re: Recovering RAID5 array
  • From: Jean Jordaan <jean@xxxxxxxxxxxxxxxxxxxx>
• Re: Recovering RAID5 array
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Recovering RAID5 array
  • From: Jean Jordaan <jean@xxxxxxxxxxxxxxxxxxxx>
• Re: What SATA controller for software raid and/or lvm?
  • From: Mark Hahn <hahn@xxxxxxxxxxxxxxxxxxx>
• Re: What SATA controller for software raid and/or lvm?
  • From: Joël Bourquard <numlock@xxxxxxxxxxx>
• Re: What SATA controller for software raid and/or lvm?
  • From: Hendrik Visage <hvisage@xxxxxxxxxxxxxx>
• Re: What SATA controller for software raid and/or lvm?
  • From: Mark Hahn <hahn@xxxxxxxxxxxxxxxxxxx>
• Re: What SATA controller for software raid and/or lvm?
  • From: Mark Hahn <hahn@xxxxxxxxxxxxxxxxxxx>
• Re: RAID-6 now in 2.6.1-mm
  • From: "H. Peter Anvin" <hpa@xxxxxxxxx>
• RE: RAID-6 now in 2.6.1-mm
  • From: "Guy" <bugzilla@xxxxxxxxxxxxxxxx>
• RAID-6 now in 2.6.1-mm
  • From: "H. Peter Anvin" <hpa@xxxxxxxxx>
• Re: What SATA controller for software raid and/or lvm?
  • From: Ming Zhang <mingz@xxxxxxxxxxx>
• Re: What SATA controller for software raid and/or lvm?
  • From: Joël Bourquard <numlock@xxxxxxxxxxx>
• Re: What SATA controller for software raid and/or lvm?
  • From: Hendrik Visage <hvisage@xxxxxxxxxxxxxx>
• Re: What SATA controller for software raid and/or lvm?
  • From: Ming Zhang <mingz@xxxxxxxxxxx>
• Re: What SATA controller for software raid and/or lvm?
  • From: Ming Zhang <mingz@xxxxxxxxxxx>
• Re: Best Practice for Raid1 Root
  • From: Frank van Maarseveen <frankvm@xxxxxxxxx>
• Re: What SATA controller for software raid and/or lvm?
  • From: Joël Bourquard <numlock@xxxxxxxxxxx>
• Re: What SATA controller for software raid and/or lvm?
  • From: Hendrik Visage <hvisage@xxxxxxxxxxxxxx>
• What SATA controller for software raid and/or lvm?
  • From: Ming Zhang <mingz@xxxxxxxxxxx>
• Re: PROBLEM: software RAID breakage under 2.6.1-mm4
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Re: PROBLEM: software RAID breakage under 2.6.1-mm4
  • From: Jim Faulkner <jfaulkne@xxxxxxxxxxx>
• Re: PROBLEM: software RAID breakage under 2.6.1-mm4
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• PROBLEM: software RAID breakage under 2.6.1-mm4
  • From: Jim Faulkner <jfaulkne@xxxxxxxxxxx>
• [bug] 2.6.1 md multipathing
  • From: Heiko Carstens <heiko.carstens@xxxxxxxxxx>
• raid5 and bad blocks
  • From: Daniel Sievers <Daniel.Sievers@xxxxxxxxxxxxxxxxxxx>
• RE: starting an array on Linux, advise needed
  • From: "Guy" <bugzilla@xxxxxxxxxxxxxxxx>
• Re: starting an array on Linux, advise needed
  • From: "Michael" <michael@xxxxxxxxxxxxxxxxxxx>
• Re: starting an array on Linux, advise needed
  • From: Michael Tokarev <mjt@xxxxxxxxxx>
• RE: starting an array on Linux, advise needed
  • From: "Guy" <bugzilla@xxxxxxxxxxxxxxxx>
• Re: Fwd: starting an array on Linux, advise needed
  • From: Luca Berra <bluca@xxxxxxxxxx>
• Fwd: starting an array on Linux, advise needed
  • From: Arkadiusz Miskiewicz <arekm@xxxxxxxxxxxxx>
• RE: error during raid config
  • From: "Guy" <bugzilla@xxxxxxxxxxxxxxxx>
• RE: error during raid config
  • From: "Guy" <bugzilla@xxxxxxxxxxxxxxxx>
• Re: error during raid config
  • From: gannan10@xxxxxxxxxxx
• linear raid device problem: I/O error on reading block
  • From: "E. Gryaznova" <grev@xxxxxxxxxxx>
• Re: error during raid config
  • From: gannan10@xxxxxxxxxxx
• Re: error during raid config
  • From: Steven Ihde <sihde@xxxxxxxxxxxxxxx>
• error during raid config
  • From: gannan10@xxxxxxxxxxx
• an idea for enhancement of raid-1 to do striping
  • From: Keld Jørn Simonsen <keld@xxxxxxxx>
• Re: Proposed enhancements to MD
  • From: Matt Domsch <Matt_Domsch@xxxxxxxx>
• Re: Proposed enhancements to MD
  • From: Christoph Hellwig <hch@xxxxxxxxxxxxx>
• Re: Proposed enhancements to MD
  • From: Christoph Hellwig <hch@xxxxxxxxxxxxx>
• Re: Proposed enhancements to MD
  • From: Matt Domsch <Matt_Domsch@xxxxxxxx>
• Re: Proposed enhancements to MD
  • From: Lars Marowsky-Bree <lmb@xxxxxxx>
• Re: Raid Array with 3.5Tb
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Re: Proposed enhancements to MD
  • From: Arjan van de Ven <arjanv@xxxxxxxxxx>
• Re: Proposed enhancements to MD
  • From: Lars Marowsky-Bree <lmb@xxxxxxx>
• Re: MD driver development effort.
  • From: Lars Marowsky-Bree <lmb@xxxxxxx>
• Re: Proposed Enhancements to MD
  • From: Lars Marowsky-Bree <lmb@xxxxxxx>
• Re: Proposed enhancements to MD
  • From: Lars Marowsky-Bree <lmb@xxxxxxx>
• Re: [PATCH] md - 2 of 10 - Don't allow raid5 rebuild to swamp raid5 stripe cache
  • From: Andrew Morton <akpm@xxxxxxxx>
• Re: [PATCH] md - 2 of 10 - Don't allow raid5 rebuild to swamp raid5 stripe cache
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Re: [PATCH] md - 2 of 10 - Don't allow raid5 rebuild to swamp raid5 stripe cache
  • From: Andrew Morton <akpm@xxxxxxxx>
• [PATCH] md - 0 of 10 - Intro
  • From: NeilBrown <neilb@xxxxxxxxxxxxxxx>
• [PATCH] md - 5 of 10 - Make sure md recovery happens appropriately.
  • From: NeilBrown <neilb@xxxxxxxxxxxxxxx>
• [PATCH] md - 7 of 10 - Small fixes for timely writing of md superblocks.
  • From: NeilBrown <neilb@xxxxxxxxxxxxxxx>
• [PATCH] md - 4 of 10 - Fix typo in comment
  • From: NeilBrown <neilb@xxxxxxxxxxxxxxx>
• [PATCH] md - 9 of 10 - Discard the mddev_map array.
  • From: NeilBrown <neilb@xxxxxxxxxxxxxxx>
• [PATCH] md - 10 of 10 - Use bd_disk->private data instead of bd_inode->u.generic_ip
  • From: NeilBrown <neilb@xxxxxxxxxxxxxxx>
• [PATCH] md - 8 of 10 - Remove the 'disks' array from md which holds the gendisk structures.
  • From: NeilBrown <neilb@xxxxxxxxxxxxxxx>
• [PATCH] md - 6 of 10 - Don't do_md_stop and array when do_md_run fails.
  • From: NeilBrown <neilb@xxxxxxxxxxxxxxx>
• [PATCH] md - 3 of 10 - Make sure an interrupted resync doesn't seem to have completed.
  • From: NeilBrown <neilb@xxxxxxxxxxxxxxx>
• [PATCH] md - 1 of 10 - fix return code in set_disk_faulty()
  • From: NeilBrown <neilb@xxxxxxxxxxxxxxx>
• [PATCH] md - 2 of 10 - Don't allow raid5 rebuild to swamp raid5 stripe cache
  • From: NeilBrown <neilb@xxxxxxxxxxxxxxx>
• RE: Raid Array with 3.5Tb
  • From: "Guy" <bugzilla@xxxxxxxxxxxxxxxx>
• Re: Proposed enhancements to MD
  • From: Matt Domsch <Matt_Domsch@xxxxxxxx>
• Raid Array with 3.5Tb
  • From: Evan Felix <evan.felix@xxxxxxx>
• Re: changing MD device
  • From: Aaron Gee <cluge1669@xxxxxxxxxxxx>
• Re: Highpoint 1820 Redux
  • From: Terrence Martin <tmartin@xxxxxxxxxxxxxxxx>
• Highpoint 1820 Redux
  • From: Joël Bourquard <numlock@xxxxxxxxxxx>
• Re: Best Practice for Raid1 Root
  • From: Luca Berra <bluca@xxxxxxxxxx>
• Re: Proposed enhancements to MD
  • From: Norman Schmidt <norman.schmidt@xxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: Best Practice for Raid1 Root
  • From: Gordon Henderson <gordon@xxxxxxxxxx>
• MD driver development effort.
  • From: "DIARE,ABOUBACAR (HP-Roseville,ex1)" <aboubacar.diare@xxxxxx>
• Re: Best Practice for Raid1 Root
  • From: Terrence Martin <tmartin@xxxxxxxxxxxxxxxx>
• Re: Best Practice for Raid1 Root
  • From: Terrence Martin <tmartin@xxxxxxxxxxxxxxxx>
• Re: Best Practice for Raid1 Root
  • From: Michael Tokarev <mjt@xxxxxxxxxx>
• Re: Best Practice for Raid1 Root
  • From: Michael Tokarev <mjt@xxxxxxxxxx>
• RE: Best Practice for Raid1 Root
  • From: "Christian Kivalo" <valo@xxxxxxx>
• Best Practice for Raid1 Root
  • From: Terrence Martin <tmartin@xxxxxxxxxxxxxxxx>
• Re: Proposed enhancements to MD
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Re: changing MD device
  • From: Luca Berra <bluca@xxxxxxxxxx>
• changing MD device
  • From: Aaron Gee <cluge1669@xxxxxxxxxxxx>
• Re: [linux-raid] 2010S issues (7902 issues HostRAID)
  • From: linuxraid@xxxxxxxxx
• No md super block found ! How to forge a super block, to force a raid to start
  • From: "Alain Spineux" <Alain.Spineux@xxxxxxxxxxxx>
• Re: [linux-raid] 2010S issues
  • From: linuxraid@xxxxxxxxx
• Re: [linux-raid] 2010S issues (7902 issues)
  • From: linuxraid@xxxxxxxxx
• Re: [linux-raid] 2010S issues (7902 issues)
  • From: linuxraid@xxxxxxxxx
• Re: [linux-raid] 2010S issues (7902 issues)
  • From: linuxraid@xxxxxxxxx
• Re: Proposed enhancements to MD
  • From: Kevin Corry <kevcorry@xxxxxxxxxx>
• [linux-raid] 2010S issues
  • From: linuxraid@xxxxxxxxx
• Re: Can't boot from Adaptec 2010s
  • From: linuxraid@xxxxxxxxx
• Re: Proposed enhancements to MD
  • From: Luca Berra <bluca@xxxxxxxxxx>
• Re: Proposed enhancements to MD
  • From: Scott Long <scott_long@xxxxxxxxxxx>
• Re: Proposed enhancements to MD
  • From: viro@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
• Re: Proposed Enhancements to MD
  • From: Andreas Dilger <adilger@xxxxxxxxxxxxx>
• Re: Proposed enhancements to MD
  • From: Jure Pečar <pegasus@xxxxxxxxxxx>
• Re: Proposed enhancements to MD
  • From: Arjan van de Ven <arjanv@xxxxxxxxxx>
• Re: Proposed Enhancements to MD
  • From: Andreas Dilger <adilger@xxxxxxxxxxxxx>
• Re: Proposed Enhancements to MD
  • From: Matt Domsch <Matt_Domsch@xxxxxxxx>
• Re: Proposed enhancements to MD
  • From: Scott Long <scott_long@xxxxxxxxxxx>
• RE: Please help with a special RAID 1 setup
  • From: linux@xxxxxxxxxxx
• Re: Proposed Enhancements to MD
  • From: Chris Friesen <cfriesen@xxxxxxxxxxxxxxxxxx>
• Hardware RAID and DDF metadata
  • From: linux@xxxxxxxxxxx
• Re: Proposed Enhancements to MD
  • From: Matt Domsch <Matt_Domsch@xxxxxxxx>
• Re: Proposed enhancements to MD
  • From: Matt Domsch <Matt_Domsch@xxxxxxxx>
• Re: Proposed enhancements to MD
  • From: Jeff Garzik <jgarzik@xxxxxxxxx>
• Re: Proposed enhancements to MD
  • From: John Bradford <john@xxxxxxxxxxxx>
• Re: Proposed Enhancements to MD
  • From: "Kevin P. Fleming" <kpfleming@xxxxxxxxxxxxxxxxxxxx>
• Re: Proposed Enhancements to MD
  • From: Jeff Garzik <jgarzik@xxxxxxxxx>
• Re: Proposed Enhancements to MD
  • From: Scott Long <scott_long@xxxxxxxxxxx>
• Re: Proposed Enhancements to MD
  • From: Matt Domsch <Matt_Domsch@xxxxxxxx>
• Re: Proposed Enhancements to MD
  • From: Lars Marowsky-Bree <lmb@xxxxxxx>
• Can't boot from Adaptec 2010s
  • From: linuxraid@xxxxxxxxx
• Proposed Enhancements to MD
  • From: Scott Long <scott_long@xxxxxxxxxxx>
• Re: Linear RAID (was Re: bad /proc/mdstat message)
  • From: Luca Berra <bluca@xxxxxxxxxx>
• Re: Linear RAID (was Re: bad /proc/mdstat message)
  • From: Mike Fedyk <mfedyk@xxxxxxxxxxxxx>
• RE: Linear RAID (was Re: bad /proc/mdstat message)
  • From: "Christian Kivalo" <valo@xxxxxxx>
• Linear RAID (was Re: bad /proc/mdstat message)
  • From: Sharif Islam <mislam@xxxxxxxxxxxxxxxx>
• Re: bad /proc/mdstat message
  • From: Luca Berra <bluca@xxxxxxxxxx>
• Re: bad /proc/mdstat message
  • From: Sharif Islam <mislam@xxxxxxxxxxxxxxxx>
• Re: bad /proc/mdstat message
  • From: Mike Fedyk <mfedyk@xxxxxxxxxxxxx>
• RE: bad /proc/mdstat message
  • From: "Guy" <bugzilla@xxxxxxxxxxxxxxxx>
• bad /proc/mdstat message
  • From: Sharif Islam <mislam@xxxxxxxxxxxxxxxx>
• RE: Extend raid 5
  • From: "Guy" <bugzilla@xxxxxxxxxxxxxxxx>
• Re: Extend raid 5
  • From: Maarten v d Berg <maarten@xxxxxxx>
• Re: Extend raid 5
  • From: Marc Bevand <marc.bevand@xxxxxxxxxxxx>
• Re: Extend raid 5
  • From: mru@xxxxxx (Måns Rullgård)
• Re: Extend raid 5
  • From: Maarten v d Berg <maarten@xxxxxxx>
• Re: Array Size
  • From: jlewis@xxxxxxxxx
• RE: Array Size
  • From: "Guy" <bugzilla@xxxxxxxxxxxxxxxx>
• Array Size
  • From: Sharif Islam <mislam@xxxxxxxxxxxxxxxx>
• Re: Extend raid 5
  • From: Mike Fedyk <mfedyk@xxxxxxxxxxxxx>
• Extend raid 5
  • From: buliwyf <buliwyf@xxxxxx>
• More info regarding failed RAID over VIA
  • From: Daniel Brahneborg <daniel.com@xxxxxxxxxx>
• Re: Bad Recovery
  • From: "Stephen Hargrove" <stephen@xxxxxxxxxxxxx>
• Re: Status of Promise drivers?
  • From: Daniel Brahneborg <daniel.com@xxxxxxxxxx>
• Re: Forcing a disk online
  • From: Luca Berra <bluca@xxxxxxxxxx>
• Re: Bad Recovery
  • From: Luca Berra <bluca@xxxxxxxxxx>
• Forcing a disk online
  • From: Nathan Hunsperger <linux-raid@xxxxxxxxxxxxxx>
• Bad Recovery
  • From: "Stephen Hargrove" <stephen@xxxxxxxxxxxxx>
• RE: mkraid with 2.6.0
  • From: "Guy" <bugzilla@xxxxxxxxxxxxxxxx>
• Where mkraid has problems
  • From: Karel Kulhavý <clock@xxxxxxxxxxxxx>
• mkraid with 2.6.0
  • From: Karel Kulhavý <clock@xxxxxxxxxxxxx>
• Multiline string literals patch
  • From: Karel Kulhavý <clock@xxxxxxxxxxxxx>
• Re: RAID 5 from 2.4.24 to 2.6.0
  • From: Mike Fedyk <mfedyk@xxxxxxxxxxxxx>
• RAID 5 from 2.4.24 to 2.6.0
  • From: Martin F Krafft <krafft@xxxxxxxx>
• stability problems with 2.4.24/Software RAID/ext3
  • From: martin f krafft <madduck@xxxxxxxxxxx>
• [BUG] raidtools-1.00.3 - BLKGETSIZE ioctl call wrong
  • From: Heiko Carstens <heiko.carstens@xxxxxxxxxx>
• Re: RAID5 over Serial-ATA success stories?
  • From: "A.J.Dawson" <A.J.Dawson@xxxxxxxxxxxxxx>
• Raid 5 Performace
  • From: "Biro Andras" <Andras.Biro@xxxxxxxxxxxx>
• Re: RAID5 over Serial-ATA success stories?
  • From: Daniel Brahneborg <basic@xxxxxxxxxx>
• this is beyond bizzare dbbzswdnhvb
  • From: "Maynard Boston" <jimmorris@xxxxxxxxx>
• Re: RAID5 over Serial-ATA success stories?
  • From: mru@xxxxxx (Måns Rullgård)
• Re: RAID5 over Serial-ATA success stories?
  • From: Daniel Brahneborg <basic@xxxxxxxxxx>
• Re: 2.6.0: ext3 journal aborted with ext3/lvm/raid5
  • From: Steven Ihde <sihde@xxxxxxxxxxxxxxx>
• Re: 2.6.0: ext3 journal aborted with ext3/lvm/raid5
  • From: Mike Fedyk <mfedyk@xxxxxxxxxxxxx>
• Re: RAID5 over Serial-ATA success stories?
  • From: mru@xxxxxx (Måns Rullgård)
• Re: 2.6.0: ext3 journal aborted with ext3/lvm/raid5
  • From: Steven Ihde <sihde@xxxxxxxxxxxxxxx>
• RAID5 over Serial-ATA success stories?
  • From: Daniel Brahneborg <daniel.com@xxxxxxxxxx>
• Re: 2.6.0: ext3 journal aborted with ext3/lvm/raid5
  • From: Mike Fedyk <mfedyk@xxxxxxxxxxxxx>
• 2.6.0: ext3 journal aborted with ext3/lvm/raid5
  • From: Steven Ihde <sihde@xxxxxxxxxxxxxxx>
• Re: RAID1 over RAID0 misbehavior
  • From: Jose Luis Domingo Lopez <linux-raid@xxxxxxxxxxxxx>
• Re: Please help with a special RAID 1 setup
  • From: Mircea Ciocan <mirceac@xxxxxxxxxxxx>
• Re: Please help with a special RAID 1 setup
  • From: Mircea Ciocan <mirceac@xxxxxxxxxxxx>
• Re: RAID1 over RAID0 misbehavior
  • From: mru@xxxxxx (Måns Rullgård)
• RE: Please help with a special RAID 1 setup
  • From: "Cress, Andrew R" <andrew.r.cress@xxxxxxxxx>
• RE: Please help with a special RAID 1 setup
  • From: "Michael" <michael@xxxxxxxxxxxxxxxxxxx>
• RE: Please help with a special RAID 1 setup
  • From: "Rechenberg, Andrew" <ARechenberg@xxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: Please help with a special RAID 1 setup
  • From: Luca Berra <bluca@xxxxxxxxxx>
• Re: Please help with a special RAID 1 setup
  • From: greg@xxxxxxxxxxxxxxxxx (Dr. Greg Wettstein)
• Re: Please help with a special RAID 1 setup
  • From: Mircea Ciocan <mirceac@xxxxxxxxxxxx>
• RE: Please help with a special RAID 1 setup
  • From: "Cress, Andrew R" <andrew.r.cress@xxxxxxxxx>
• mdadm --manage --run stops a running array
  • From: Lars Ehrhardt <0104@xxxxxxxxx>
• Re: Please help with a special RAID 1 setup
  • From: Catalin BOIE <util@xxxxxxxxxxxxxxx>
• Re: Please help with a special RAID 1 setup
  • From: Catalin BOIE <util@xxxxxxxxxxxxxxx>
• Re: Please help with a special RAID 1 setup
  • From: Mircea Ciocan <mirceac@xxxxxxxxxxxx>
• Re: Please help with a special RAID 1 setup
  • From: Catalin BOIE <util@xxxxxxxxxxxxxxx>
• Re: raid0_make_request bug: can't convert block across chunks or bigger than
  • From: mru@xxxxxx (Måns Rullgård)
• Re: raid0_make_request bug: can't convert block across chunks or bigger than
  • From: Andrew Morton <akpm@xxxxxxxx>
• Please help with a special RAID 1 setup
  • From: Mircea Ciocan <mirceac@xxxxxxxxxxxx>
• raid0_make_request bug: can't convert block across chunks or bigger than
  • From: mru@xxxxxx (Måns Rullgård)
• Re: RAID1 over RAID0 misbehavior
  • From: mru@xxxxxx (Måns Rullgård)
• RE: RAID1 over RAID0 misbehavior
  • From: "Guy" <bugzilla@xxxxxxxxxxxxxxxx>
• RAID1 over RAID0 misbehavior
  • From: mru@xxxxxx (Måns Rullgård)
• Re: Force RAID1 as clean
  • From: mru@xxxxxx (Måns Rullgård)
• Re: Force RAID1 as clean
  • From: Thomas Steudten <alpha@xxxxxxxxxxxx>
• Re: Force RAID1 as clean
  • From: "Matthew Simpson" <matthew@xxxxxxxxxxxxxxxxxxxx>
• Raid 1 without a persistent superblock
  • From: Steve Hill <steve@xxxxxxxxxxxx>
• Force RAID1 as clean
  • From: mru@xxxxxx (Måns Rullgård)
• raid1_conf_t member meanings
  • From: Bin Ren <br260@xxxxxxxxx>
• some other raid1_conf_t member meanings (Modified by Bin Ren)
  • From: Bin Ren <br260@xxxxxxxxx>
• Re: please help, I've screwed up my RAID 1 install
  • From: Mike Fedyk <mfedyk@xxxxxxxxxxxxx>
• please help, I've screwed up my RAID 1 install
  • From: "Matthew Simpson" <matthew@xxxxxxxxxxxxxxxxxxxx>
• Re: Software RAID-5 safe under 2.6 kernel?
  • From: Daniel Brahneborg <basic@xxxxxxxxxx>
• Software RAID-5 safe under 2.6 kernel?
  • From: AndyLiebman@xxxxxxx
• Linux RAID - Moving array from one system to another
  • From: Rich West <Rich.West@xxxxxxxxx>
• 2.6.1-rc1 - RAID5 -> oops -> other mischief
  • From: Bryce as root <root@xxxxxxxxxxxxxxxx>
• Re: ICH5 docs
  • From: Jeff Garzik <jgarzik@xxxxxxxxx>
• Re: ICH5 docs
  • From: Jeff Woods <kazrak+kernel@xxxxxxxxxxx>
• Re: Status of HighPoint / Promise drivers?
  • From: jlewis@xxxxxxxxx
• Re: Status of HighPoint / Promise drivers?
  • From: Jeff Garzik <jgarzik@xxxxxxxxx>
• Re: Status of Promise drivers?
  • From: Jeff Garzik <jgarzik@xxxxxxxxx>
• Re: Status of HighPoint / Promise drivers?
  • From: Daniel Brahneborg <daniel.com@xxxxxxxxxx>
• Re: RAID0 superblock update time inconsistency
  • From: andrewm@xxxxxxxxxxxxxxx (Andrew Robert Mitchell)
• Re: Status of Promise drivers?
  • From: Daniel Brahneborg <daniel.com@xxxxxxxxxx>
• Re: Status of Promise drivers?
  • From: Daniel Brahneborg <daniel.com@xxxxxxxxxx>
• Re: Status of Promise drivers?
  • From: Jeff Garzik <jgarzik@xxxxxxxxx>
• Re: Status of Promise drivers?
  • From: Jeff Garzik <jgarzik@xxxxxxxxx>
• Re: Status of Promise drivers?
  • From: Hendrik Visage <hvisage@xxxxxxxxxxxxxx>
• Re: Status of Promise drivers?
  • From: Jeff Garzik <jgarzik@xxxxxxxxx>
• Re: Status of Promise drivers?
  • From: Daniel Brahneborg <daniel.com@xxxxxxxxxx>
• Re: New RAID-6 snapshot
  • From: "H. Peter Anvin" <hpa@xxxxxxxxx>
• Re: Status of Promise drivers?
  • From: Jeff Garzik <jgarzik@xxxxxxxxx>
• Status of Promise drivers?
  • From: Daniel Brahneborg <daniel.com@xxxxxxxxxx>
• Re: New RAID-6 snapshot
  • From: "H. Peter Anvin" <hpa@xxxxxxxxx>
• Re: New RAID-6 snapshot
  • From: Mike Fedyk <mfedyk@xxxxxxxxxxxxx>
• Re: New RAID-6 snapshot
  • From: Mike Fedyk <mfedyk@xxxxxxxxxxxxx>
• Re: New RAID-6 snapshot
  • From: "H. Peter Anvin" <hpa@xxxxxxxxx>
• Re: New RAID-6 snapshot
  • From: Mike Fedyk <mfedyk@xxxxxxxxxxxxx>
• RAID0 superblock update time inconsistency
  • From: andrewm@xxxxxxxxxxxxxxx (Andrew Robert Mitchell)
• New RAID-6 snapshot
  • From: "H. Peter Anvin" <hpa@xxxxxxxxx>
• Re: BUG: Data corruption on Raid5 in Linux 2.6.0
  • From: Daniel Brahneborg <daniel.com@xxxxxxxxxx>
• Re: inactive raid scsi disks
  • From: Nicolas Meaux <nicolas.meaux@xxxxxxxxxxx>
• inactive raid scsi disks
  • From: Nicolas Meaux <nicolas.meaux@xxxxxxxxxxx>
• Re: BUG: Data corruption on Raid5 in Linux 2.6.0
  • From: Mike Fedyk <mfedyk@xxxxxxxxxxxxx>
• Persisting hotspare configuration
  • From: mattyml@xxxxxxxxxxxxx
• Re: BUG: Data corruption on Raid5 in Linux 2.6.0
  • From: Daniel Brahneborg <daniel.com@xxxxxxxxxx>
• Re: siimage and two nics
  • From: Daniel Brahneborg <daniel.com@xxxxxxxxxx>
• Re: BUG: Data corruption on Raid5 in Linux 2.6.0
  • From: Daniel Brahneborg <daniel.com@xxxxxxxxxx>
• Re: BUG: Data corruption on Raid5 in Linux 2.6.0
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• BUG: Data corruption on Raid5 in Linux 2.6.0
  • From: Daniel Brahneborg <daniel.com@xxxxxxxxxx>
• Failed RAID1: lsof or raid code: who's lying? :)
  • From: James Bromberger <james@xxxxxxx>
• Bonnie numbers for RAID-6
  • From: "H. Peter Anvin" <hpa@xxxxxxxxx>
• raid 1 random write performance is better than the disk?
  • From: Ming Zhang <mingz@xxxxxxxxxxx>
• md bugs discovered during RAID-6 work
  • From: "H. Peter Anvin" <hpa@xxxxxxxxx>
• Re: Invalid superblock on drives in array
  • From: Peter Jonsson <dal01pjn@xxxxxxxxxx>
• Re: Invalid superblock on drives in array
  • From: seth vidal <skvidal@xxxxxxxxxxxx>
• Re: Invalid superblock on drives in array
  • From: Peter Jonsson <dal01pjn@xxxxxxxxxx>
• Re: Invalid superblock on drives in array
  • From: seth vidal <skvidal@xxxxxxxxxxxx>
• Invalid superblock on drives in array
  • From: Peter Jonsson <dal01pjn@xxxxxxxxxx>
• Re: hadware raid [_U] issue.
  • From: "H. Peter Anvin" <hpa@xxxxxxxxx>
• hadware raid [_U] issue.
  • From: Vijay Kumar <vijay@xxxxxxxxxxxxxx>
• 2.6.0: Should I worry about "hdc12 has different UUID to hdc13" ?
  • From: Mark Smith <ietf@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx>
• RAID-6 works! (At least it seems to...)
  • From: "H. Peter Anvin" <hpa@xxxxxxxxx>
• Re: Bug in RAID1 in 2.4
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• RAID-6 development snapshot (not quite working yet)
  • From: "H. Peter Anvin" <hpa@xxxxxxxxx>
• Re: Adding a mirror to a RAID1 Device
  • From: "H. Peter Anvin" <hpa@xxxxxxxxx>
• Bug in RAID1 in 2.4
  • From: Pete Zaitcev <zaitcev@xxxxxxxxxx>
• Re: partitions on software-raid
  • From: David Haring <david.haring@xxxxxxxxxxxx>
• Re: RAID5 resync blocking on 2.6.0-test11
  • From: Fernando Serboncini <fserb@xxxxxxxxxxxxxxxxx>
• Re: partitions on software-raid
  • From: Paul Clements <Paul.Clements@xxxxxxxxxxxx>
• partitions on software-raid
  • From: Norman Schmidt <norman.schmidt@xxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: multipath - stable ?
  • From: Franc Carter <franc@xxxxxxxxxxxxxxxxx>
• Re: multipath - stable ?
  • From: Steven Dake <sdake@xxxxxxxxxx>
• Re: adaptec aar1210 serial ata and 2.6.0
  • From: "Justin T. Gibbs" <gibbs@xxxxxxxxxxx>
• Software raid 5 messed up...
  • From: Stefan Myankov <kotak@xxxxxxxxxxxxx>
• Re: Firewire RAID bootparameters?
  • From: AndyLiebman@xxxxxxx
• Re: Firewire RAID bootparameters?
  • From: Luca Berra <bluca@xxxxxxxxxx>
• Re: Firewire RAID bootparameters?
  • From: "Christer Backstrom" <cbackstrom@xxxxxxxxxxx>
• Re: multipath - stable ?
  • From: "Doug Griswold" <griswld@xxxxxxxxxx>
• Re: Patch to fix defect in raid 1 spinlocks
  • From: Paul Clements <Paul.Clements@xxxxxxxxxxxx>
• Re: multipath - stable ?
  • From: Franc Carter <franc@xxxxxxxxxxxxxxxxx>
• Patch to fix defect in raid 1 spinlocks
  • From: Steven Dake <sdake@xxxxxxxxxx>
• Re: Firewire RAID bootparameters?
  • From: "Rechenberg, Andrew" <ARechenberg@xxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: Kernal Panic when booting redhat. Raid devices mount fine underKnoppix
  • From: Brandon Evans <maillists@xxxxxxxxxxxx>
• Re: multipath - stable ?
  • From: Steven Dake <sdake@xxxxxxxxxx>
• partitions on md-devices - /dev-entries
  • From: Norman Schmidt <norman.schmidt@xxxxxxxxxxxxxxxxxxxxxxxxxx>
• Firewire RAID bootparameters?
  • From: Christer Bäckström <cbackstrom@xxxxxxxxxxx>
• multipath - stable ?
  • From: Franc Carter <franc@xxxxxxxxxxxxxxxxx>
• RE: Raid array not clean (its barely used and a few weeks old.. how can i find out what went wrong?)
  • From: "Guy" <bugzilla@xxxxxxxxxxxxxxxx>
• RAID5 resync blocking on 2.6.0-test11
  • From: Fernando Serboncini <fserb@xxxxxxxxxxxxxxxxx>
• RE: Raid array not clean (its barely used and a few weeks old.. how can i find out what went wrong?)
  • From: "James R Bamford" <jim@xxxxxxxxxxxxx>
• trouble recovering 8-disk RAID5 into degraded mode with mdadm
  • From: Bryan Caron <caron@xxxxxxxxxxxxxxxx>
• Re: Kernal Panic when booting redhat. Raid devices mount fine underKnoppix
  • From: Dan Egli <dan@xxxxxxxxxxxxxxxxxxxxxxx>
• Re: Kernal Panic when booting redhat. Raid devices mount fine underKnoppix
  • From: Brandon Evans <maillists@xxxxxxxxxxxx>
• Relative performance of RAID-5 algorithms
  • From: "H. Peter Anvin" <hpa@xxxxxxxxx>
• RE: Raid array not clean (its barely used and a few weeks old.. how can i find out what went wrong?)
  • From: "Guy" <bugzilla@xxxxxxxxxxxxxxxx>
• Raid array not clean (its barely used and a few weeks old.. how can i find out what went wrong?)
  • From: "James R Bamford" <jim@xxxxxxxxxxxxx>
• Kernal Panic when booting redhat. Raid devices mount fine under Knoppix
  • From: Brandon Evans <maillists@xxxxxxxxxxxx>
• Linear raid and superblock update time inconsistency
  • From: "Johan Tufberg" <tufberg@xxxxxxx>
• Re: Software RAID-5 attempt to access beyond end of device...
  • From: Stefan Myankov <kotak@xxxxxxxxxxxxx>
• Re: RAID-0 read perf. decrease after 2.4.20
  • From: Marcelo Tosatti <marcelo.tosatti@xxxxxxxxxxxx>
• Re: RAID-0 read perf. decrease after 2.4.20
  • From: Marc-Christian Petersen <m.c.p@xxxxxxxxxxxxxxx>
• Re: RAID-0 read perf. decrease after 2.4.20
  • From: Marcelo Tosatti <marcelo.tosatti@xxxxxxxxxxxx>
• Software RAID-5 attempt to access beyond end of device...
  • From: Stefan Myankov <kotak@xxxxxxxxxxxxx>
• adaptec aar1210 serial ata and 2.6.0
  • From: "Paul" <paul@xxxxxxxxxx>
• repost {PATCH} parser.c stronger
  • From: "Phil Drummond" <raidtools@xxxxxxxxxx>
• [PATCH] raidreconf (v2)
  • From: "Phil Drummond" <raidtools@xxxxxxxxxx>
• mkraid creating 5G raid device from 110G partitions
  • From: Brandon Evans <maillists@xxxxxxxxxxxx>
• Re: Reproducable OOPS with MD RAID-5 on 2.6.0-test11
  • From: "Theodore Ts'o" <tytso@xxxxxxx>
• Re: Reproducable OOPS with MD RAID-5 on 2.6.0-test11
  • From: Simon Kirby <sim@xxxxxxxxxxxxx>
• Re: Reproducable OOPS with MD RAID-5 on 2.6.0-test11
  • From: Linus Torvalds <torvalds@xxxxxxxx>
• Re: Reproducable OOPS with MD RAID-5 on 2.6.0-test11
  • From: Simon Kirby <sim@xxxxxxxxxxxxx>
• raidreconf patch is bad
  • From: "Phil Drummond" <raidtools@xxxxxxxxxx>
• [PATCH] parser.c stronger
  • From: "Phil Drummond" <raidtools@xxxxxxxxxx>
• Re: Reproducable OOPS with MD RAID-5 on 2.6.0-test11
  • From: Linus Torvalds <torvalds@xxxxxxxx>
• Re: Reproducable OOPS with MD RAID-5 on 2.6.0-test11
  • From: Nathan Scott <nathans@xxxxxxx>
• [PATCH] raidreconf
  • From: "Phil Drummond" <raidtools@xxxxxxxxxx>
• Re: Reproducable OOPS with MD RAID-5 on 2.6.0-test11
  • From: Linus Torvalds <torvalds@xxxxxxxx>
• Re: Which controller is recommended for a hardware-raid
  • From: Holger Kiehl <Holger.Kiehl@xxxxxx>
• Re: Which controller is recommended for a hardware-raid
  • From: Jeff Garzik <jgarzik@xxxxxxxxx>
• Re: Reproducable OOPS with MD RAID-5 on 2.6.0-test11
  • From: "Kevin P. Fleming" <kpfleming@xxxxxxxxxxxxxxxxxxxx>
• Re: Reproducable OOPS with MD RAID-5 on 2.6.0-test11
  • From: "Kevin P. Fleming" <kpfleming@xxxxxxxxxxxxxxxxxxxx>
• Re: Reproducable OOPS with MD RAID-5 on 2.6.0-test11
  • From: Nathan Scott <nathans@xxxxxxx>
• Re: Which controller is recommended for a hardware-raid
  • From: Holger Kiehl <Holger.Kiehl@xxxxxx>
• Re: Reproducable OOPS with MD RAID-5 on 2.6.0-test11
  • From: Jens Axboe <axboe@xxxxxxx>
• Re: Reproducable OOPS with MD RAID-5 on 2.6.0-test11
  • From: Mike Fedyk <mfedyk@xxxxxxxxxxxxx>
• Re: Reproducable OOPS with MD RAID-5 on 2.6.0-test11
  • From: "Kevin P. Fleming" <kpfleming@xxxxxxxxxxxxxxxxxxxx>
• Re: Reproducable OOPS with MD RAID-5 on 2.6.0-test11 - with XFS
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• RE: What raid to build on that drives?
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• RE: What raid to build on that drives?
  • From: "Bailey, Scott" <scott.bailey@xxxxxxx>
• Re: Reproducable OOPS with MD RAID-5 on 2.6.0-test11
  • From: Jens Axboe <axboe@xxxxxxx>
• Re: Reproducable OOPS with MD RAID-5 on 2.6.0-test11
  • From: Jens Axboe <axboe@xxxxxxx>
• Re: Reproducable OOPS with MD RAID-5 on 2.6.0-test11
  • From: "Kevin P. Fleming" <kpfleming@xxxxxxxxxxxxxxxxxxxx>
• Reproducable OOPS with MD RAID-5 on 2.6.0-test11
  • From: "Kevin P. Fleming" <kpfleming@xxxxxxxxxxxxxxxxxxxx>
• Re: RAID1 always resyncs at boot???
  • From: drtebi@xxxxxxxxxx
• Re: RAID1 always resyncs at boot???
  • From: Ricky Beam <jfbeam@xxxxxxxxxxxxxx>
• Howto recover 2 SoftRaid 5 device fail
  • From: Song Pan <pansong@xxxxxxxxx>
• Howto recover 2 SoftRaid 5 device fail
  • From: Song Pan <pansong@xxxxxxxxx>
• Howto recover 2 SoftRaid 5 device fail
  • From: Song Pan <pansong@xxxxxxxxx>
• Re: HighPoint 1820 (8pt sata pcix, $170)
  • From: Jeff Garzik <jgarzik@xxxxxxxxx>
• Re: Serial ATA
  • From: Jeff Garzik <jgarzik@xxxxxxxxx>
• Re: Which controller is recommended for a hardware-raid
  • From: Jeff Garzik <jgarzik@xxxxxxxxx>
• Which controller is recommended for a hardware-raid
  • From: linuxraid@xxxxxxxxx
• How to change RAID1 to NON_RAID (lilo problem)
  • From: "Mehrdad Ziaei" <subscriber@xxxxxxxxx>
• raid5: Operation Continuing on 0 devices?
  • From: Timo Boettcher <spida@xxxxxxx>
• Serial ATA
  • From: danci@xxxxxxxxx
• Re: HighPoint 1820 (8pt sata pcix, $170)
  • From: jlewis@xxxxxxxxx
• HighPoint 1820 (8pt sata pcix, $170)
  • From: Mark Hahn <hahn@xxxxxxxxxxxxxxxxxxx>
• Re: RAID1 always resyncs at boot???
  • From: drtebi@xxxxxxxxxx
• Re: RAID1 always resyncs at boot???
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Re: RAID1 always resyncs at boot???
  • From: drtebi@xxxxxxxxxx
• Re: RAID1 always resyncs at boot???
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Re: RAID1 always resyncs at boot???
  • From: drtebi@xxxxxxxxxx
• Re: RAID1 always resyncs at boot???
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• RAID1 always resyncs at boot???
  • From: drtebi@xxxxxxxxxx
• Contents of console input
  • From: andy-linux-raid@xxxxxxxxxxxxxxxx
• Re: Adding a mirror to a RAID1 Device
  • From: jlewis@xxxxxxxxx
• Re: What raid to build on that drives?
  • From: Timo Boettcher <spida@xxxxxxx>
• Re: What raid to build on that drives?
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Re: What raid to build on that drives?
  • From: "David Rees" <drees@xxxxxxxxxxxxxxxx>
• Re: What raid to build on that drives?
  • From: Timo Boettcher <spida@xxxxxxx>
• Re: What raid to build on that drives?
  • From: "Dan Egli" <dan@xxxxxxxxxxxxxxxxxxxxxxx>
• What raid to build on that drives?
  • From: Timo Boettcher <spida@xxxxxxx>
• Cannot boot from raid1 root partition
  • From: "Yu Ting LIU" <yt_ytliu@xxxxxxxxxxx>
• Re: Adding a mirror to a RAID1 Device
  • From: Luca Berra <bluca@xxxxxxxxxx>
• Re: Adding a mirror to a RAID1 Device
  • From: jlewis@xxxxxxxxx
• Re: Adding a mirror to a RAID1 Device
  • From: Dan Egli <dan@xxxxxxxxxxxxxxxxxxxxxxx>
• Re: Adding a mirror to a RAID1 Device
  • From: Luca Berra <bluca@xxxxxxxxxx>
• Re: Adding a mirror to a RAID1 Device
  • From: Dan Egli <dan@xxxxxxxxxxxxxxxxxxxxxxx>
• Re: Adding a mirror to a RAID1 Device
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Re: Adding a mirror to a RAID1 Device
  • From: jlewis@xxxxxxxxx
• Re: XFS RAID only writing half the time
  • From: Dirk Hufnagel <hufnagel@xxxxxxxxxxxxxxxxxx>
• Re: XFS RAID only writing half the time
  • From: Hendrik Visage <hvisage@xxxxxxxxxxxxxx>
• Re: XFS RAID only writing half the time
  • From: AndyLiebman@xxxxxxx
• Re: XFS RAID only writing half the time
  • From: Hendrik Visage <hvisage@xxxxxxxxxxxxxx>
• XFS RAID only writing half the time
  • From: AndyLiebman@xxxxxxx
• Re: Adding a mirror to a RAID1 Device
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Adding a mirror to a RAID1 Device
  • From: "Caleb Crome" <linux-raid@xxxxxxxxx>
• Re: I'm Astounded by How Good Linux Software RAID IS!
  • From: Hermann Himmelbauer <dusty@xxxxxxxxxxxxxxxxxxxx>
• Re: libata + raid
  • From: Hendrik Visage <hvisage@xxxxxxxxxxxxxx>
• libata + raid
  • From: Oliver Heinz <oheinz@xxxxxxxxxxxxxxxxxxxxxxxx>
• Re: I'm Astounded by How Good Linux Software RAID IS!
  • From: AndyLiebman@xxxxxxx
• Re: I'm Astounded by How Good Linux Software RAID IS!
  • From: Hermann Himmelbauer <dusty@xxxxxxxxxxxxxxxxxxxx>
• I'm Astounded by How Good Linux Software RAID IS!
  • From: AndyLiebman@xxxxxxx
• Re: disk failure and badblocks
  • From: Luca Berra <bluca@xxxxxxxxxx>
• Re: disk failure and badblocks
  • From: seth vidal <skvidal@xxxxxxxxxxxx>
• Re: disk failure and badblocks
  • From: Luca Berra <bluca@xxxxxxxxxx>
• disk failure and badblocks
  • From: seth vidal <skvidal@xxxxxxxxxxxx>
• Re: Linux RAID metadata format docs?
  • From: Jeff Garzik <jgarzik@xxxxxxxxx>
• Re: RAID-0 read perf. decrease after 2.4.20
  • From: Mikael Johansson <mpjohans@xxxxxxxxxxxxxxx>
• Re: How safe is software RAID compared to how safe hardware RAID is!?
  • From: "Eric Wood" <eric@xxxxxxxxxxxxx>
• Re: How safe is software RAID compared to how safe hardware RAID is!?
  • From: Lars Marowsky-Bree <lmb@xxxxxxx>
• Re: How safe is software RAID compared to how safe hardware RAID is!?
  • From: "Rechenberg, Andrew" <ARechenberg@xxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: RAID-0 read perf. decrease after 2.4.20
  • From: Marcelo Tosatti <marcelo.tosatti@xxxxxxxxxxxx>
• [PATCH] md - 2 of 2 - Set ra_pages for raid0/raid5 devices properly.
  • From: NeilBrown <neilb@xxxxxxxxxxxxxxx>
• [PATCH] md - 1 of 2 - Limit max_sectors on md when merge_bvec_fn defined on underlying device.
  • From: NeilBrown <neilb@xxxxxxxxxxxxxxx>
• Re: How safe is software RAID compared to how safe hardware RAID is!?
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Re: Mis-matched disks RAID 1
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Mis-matched disks RAID 1
  • From: AndyLiebman@xxxxxxx
• Re: How safe is software RAID compared to how safe hardware RAID is!?
  • From: "Tomi Orava" <tomimo+linux-raid@xxxxxxxxxxxxxxxxxx>
• RAID-0 read perf. decrease after 2.4.20
  • From: Mikael Johansson <mpjohans@xxxxxxxxxxxxxxx>
• Please help Data corruption on Raid5 Array
  • From: Stefan.Hagendorn@xxxxxxxx
• Recovery question - not strictly raid related
  • From: "Luke Rosenthal" <luke@xxxxxxxx>
• Re: raid 0 on different size devices?
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Re: How safe is software RAID compared to how safe hardware RAID
  • From: Gordon Henderson <gordon@xxxxxxxxxx>
• Re: raid 0 on different size devices?
  • From: Jose Luis Domingo Lopez <linux-raid@xxxxxxxxxxxxx>
• Re: How safe is software RAID compared to how safe hardware RAID
  • From: Kanoa Withington <kanoa@xxxxxxxxxxxxxxx>
• Re: raid 0 on different size devices?
  • From: seth vidal <skvidal@xxxxxxxxxxxx>
• Re: raid 0 on different size devices?
  • From: Dan Egli <dan@xxxxxxxxxxxxxxxxxxxxxxx>
• RE: Is my raid setup speed ok?!
  • From: "Guy" <bugzilla@xxxxxxxxxxxxxxxx>
• Re: raid 0 on different size devices?
  • From: Mike Dresser <mdresser_l@xxxxxxxxxxxxxxxxxx>
• Re: raid 0 on different size devices?
  • From: seth vidal <skvidal@xxxxxxxxxxxx>
• Re: raid 0 on different size devices?
  • From: Hermann Himmelbauer <dusty@xxxxxxxxxxxxxxxxxxxx>
• Re: raid 0 on different size devices?
  • From: seth vidal <skvidal@xxxxxxxxxxxx>
• raid 0 on different size devices?
  • From: Dan Egli <dan@xxxxxxxxxxxxxxxxxxxxxxx>
• RE: Is my raid setup speed ok?!
  • From: Matthew Mitchell <matthew@xxxxxxxxxx>
• Re: How safe is software RAID compared to how safe hardware RAID is!?
  • From: "Bill Rugolsky Jr." <rugolsky@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx>
• RE: Is my raid setup speed ok?!
  • From: "Guy" <bugzilla@xxxxxxxxxxxxxxxx>
• Re: 15% used but "No space left on Device"
  • From: Chris Hirsch <chris@xxxxxxxxxxxxxxxxxxx>
• RE: Is my raid setup speed ok?!
  • From: "James R Bamford" <jim@xxxxxxxxxxxxx>
• Re: How safe is software RAID compared to how safe hardware RAID is!?
  • From: Luca Berra <bluca@xxxxxxxxxx>
• RE: Is my raid setup speed ok?!
  • From: "Guy" <bugzilla@xxxxxxxxxxxxxxxx>
• Re: How safe is software RAID compared to how safe hardware RAID is!?
  • From: "3tcdgwg3" <3tcdgwg3@xxxxxxxxxxx>
• RE: How safe is software RAID compared to how safe hardware RAID is!?
  • From: "James R Bamford" <jim@xxxxxxxxxxxxx>
• Re: How safe is software RAID compared to how safe hardware RAID
  • From: "Michael" <michael@xxxxxxxxxxxxxxxxxxx>
• Is my raid setup speed ok?!
  • From: "James R Bamford" <jim@xxxxxxxxxxxxx>
• Re: How safe is software RAID compared to how safe hardware RAID is!?
  • From: Franc Carter <franc@xxxxxxxxxxxxxxxxx>
• Re: How safe is software RAID compared to how safe hardware RAID is!?
  • From: Frank Smith <fsmith@xxxxxxxxxxx>
• Re: How safe is software RAID compared to how safe hardware RAID is!?
  • From: Kourosh <linux-raid@xxxxxxxxxxxxxxxxxxx>
• Re: How safe is software RAID compared to how safe hardware RAID is!?
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• How safe is software RAID compared to how safe hardware RAID is!?
  • From: "James R Bamford" <jim@xxxxxxxxxxxxx>
• Re: HELP.. how to remove a spare drive i accidently added
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• HELP.. how to remove a spare drive i accidently added
  • From: "James R Bamford" <jim@xxxxxxxxxxxxx>
• Re: recommended sata controllers?
  • From: Andrew Hogue <hogue@xxxxxxxxxxx>
• recommended sata controllers?
  • From: Mark Hahn <hahn@xxxxxxxxxxxxxxxxxxx>
• RE: Software Raid 1 data corruptions..
  • From: "James R Bamford" <jim@xxxxxxxxxxxxx>
• RE: Software Raid 1 data corruptions..
  • From: "Michael" <michael@xxxxxxxxxxxxxxxxxxx>
• RE: Software Raid 1 data corruptions..
  • From: "James R Bamford" <jim@xxxxxxxxxxxxx>
• Re: how to which to bigger disk (md can do it?)
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Re: how to which to bigger disk (md can do it?)
  • From: Luca Berra <bluca@xxxxxxxxxx>
• Re: how to which to bigger disk (md can do it?)
  • From: Farkas Levente <lfarkas@xxxxxxx>
• Re: how to which to bigger disk (md can do it?)
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Re: how to which to bigger disk (md can do it?)
  • From: Luca Berra <bluca@xxxxxxxxxx>
• Re: Linux RAID metadata format docs?
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Re: 15% used but "No space left on Device"
  • From: Dan Egli <dan@xxxxxxxxxxxxxxxxxxxxxxx>
• RE: Software Raid 1 data corruptions..
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Adaptec 1200A & Asus P2L97
  • From: jlewis@xxxxxxxxx
• Automatic Write Reallocation Enable, question?
  • From: "Guy" <bugzilla@xxxxxxxxxxxxxxxx>
• Re: 15% used but "No space left on Device"
  • From: Andrew Hogue <hogue@xxxxxxxxxxx>
• RE: Software Raid 1 data corruptions..
  • From: "James R Bamford" <jim@xxxxxxxxxxxxx>
• 15% used but "No space left on Device"
  • From: Andrew Hogue <hogue@xxxxxxxxxxx>
• Re: how to which to bigger disk (md can do it?)
  • From: Maurice Hilarius <maurice@xxxxxxxxxxxx>
• Re: how to which to bigger disk (md can do it?)
  • From: Farkas Levente <lfarkas@xxxxxxx>
• RE: Software Raid 1 data corruptions..
  • From: "James R Bamford" <jim@xxxxxxxxxxxxx>
• Re: how to which to bigger disk (md can do it?)
  • From: Hendrik Visage <hvisage@xxxxxxxxxxxxxx>
• how to which to bigger disk (md can do it?)
  • From: Farkas Levente <lfarkas@xxxxxxx>
• RE: Software Raid 1 data corruptions..
  • From: "James R Bamford" <jim@xxxxxxxxxxxxx>
• RE: Software Raid 1 data corruptions..
  • From: "James R Bamford" <jim@xxxxxxxxxxxxx>
• RE: Software Raid 1 data corruptions..
  • From: "James R Bamford" <jim@xxxxxxxxxxxxx>
• Software Raid 1 data corruptions..
  • From: "James R Bamford" <jim@xxxxxxxxxxxxx>
• Re: [RFCI] How best to partition MD/raid devices in 2.6
  • From: viro@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
• Re: Linux RAID metadata format docs?
  • From: Hendrik Visage <hvisage@xxxxxxxxxxxxxx>
• Re: [RFCI] How best to partition MD/raid devices in 2.6
  • From: Matt Domsch <Matt_Domsch@xxxxxxxx>
• Re: Linux RAID metadata format docs?
  • From: Jeff Garzik <jgarzik@xxxxxxxxx>
• Re: Linux RAID metadata format docs?
  • From: Matti Aarnio <matti.aarnio@xxxxxxxxxxx>
• Linux RAID metadata format docs?
  • From: Jeff Garzik <jgarzik@xxxxxxxxx>
• Re: [RFCI] How best to partition MD/raid devices in 2.6
  • From: Jeff Garzik <jgarzik@xxxxxxxxx>
• Re: [RFCI] How best to partition MD/raid devices in 2.6
  • From: Lars Marowsky-Bree <lmb@xxxxxxx>
• Re: [RFCI] How best to partition MD/raid devices in 2.6
  • From: Paul Jakma <paul@xxxxxxxx>
• Re: [RFCI] How best to partition MD/raid devices in 2.6
  • From: Luca Berra <bluca@xxxxxxxxxx>
• Re: [RFCI] How best to partition MD/raid devices in 2.6
  • From: viro@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
• Re: [RFCI] How best to partition MD/raid devices in 2.6
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Re: [RFCI] How best to partition MD/raid devices in 2.6
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Re: [RFCI] How best to partition MD/raid devices in 2.6
  • From: Daniel Gryniewicz <dang@xxxxxxxxxxx>
• Re: [RFCI] How best to partition MD/raid devices in 2.6
  • From: Daniel Pittman <daniel@xxxxxxxxxxxx>
• Re: [RFCI] How best to partition MD/raid devices in 2.6
  • From: viro@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
• [RFCI] How best to partition MD/raid devices in 2.6
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Re: force spare to sync
  • From: "Michael" <michael@xxxxxxxxxxxxxxxxxxx>
• Re: force spare to sync
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Re: [patch] raidstart problem - weakness or bug
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Re: 14 disks for RAID 5 question
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• [patch] raidstart problem - weakness or bug
  • From: Roger Gammans <roger@xxxxxxxxxxxxxxxxxxxxxx>
• Re: force spare to sync
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• 14 disks for RAID 5 question
  • From: bugzilla@xxxxxxxxxxxxxxxx
• force spare to sync
  • From: "Michael" <michael@xxxxxxxxxxxxxxxxxxx>
• Re: Moving RAID 1 array to new server
  • From: Jean-Rene Cormier <jean-rene.cormier@xxxxxxxxx>
• Re: Moving RAID 1 array to new server
  • From: Jean-Rene Cormier <jean-rene.cormier@xxxxxxxxx>
• Re: Moving RAID 1 array to new server
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Re: Moving RAID 1 array to new server
  • From: Jean-Rene Cormier <jean-rene.cormier@xxxxxxxxx>
• Re: Moving RAID 1 array to new server
  • From: Juri Haberland <list-linux.raid@xxxxxxxxxxx>
• Re: Moving RAID 1 array to new server
  • From: Jean-Rene Cormier <jean-rene.cormier@xxxxxxxxx>
• Re: Moving RAID 1 array to new server
  • From: Juri Haberland <list-linux.raid@xxxxxxxxxxx>
• Re: Moving RAID 1 array to new server
  • From: spam@xxxxxxxxx (Dick Streefland)
• Read error causes a drive to go off-line
  • From: bugzilla@xxxxxxxxxxxxxxxx
• Re: Moving RAID 1 array to new server
  • From: Jean-Rene Cormier <jean-rene.cormier@xxxxxxxxx>
• Re: Moving RAID 1 array to new server
  • From: Juri Haberland <list-linux.raid@xxxxxxxxxxx>
• Moving RAID 1 array to new server
  • From: Jean-Rene Cormier <jrc@xxxxxxxxxx>
• Re: Bug in kernel 2.2.14
  • From: Jose Luis Domingo Lopez <linux-raid@xxxxxxxxxxxxx>
• Bug in kernel 2.2.14
  • From: "Tomas Vondra" <wondra@xxxxxxxx>
• Re: ITE IT 8212 problem
  • From: Ruth Ivimey-Cook <Ruth.Ivimey-Cook@xxxxxxxxxx>
• ITE IT 8212 problem
  • From: Monda.Laszlo@xxxxxxxxxxxxxxxx
• PCD&PCBN tools
  • From: "zqcx" <z_q_c_x@xxxxxxx>
• Re: invalud argument when replacing disk of raid 5 set
  • From: Juri Haberland <list-linux.raid@xxxxxxxxxxx>
• Re: invalud argument when replacing disk of raid 5 set
  • From: Dan Egli <dan@xxxxxxxxxxxxxxxxxxxxxxx>
• Re: invalud argument when replacing disk of raid 5 set
  • From: Juri Haberland <list-linux.raid@xxxxxxxxxxx>
• invalud argument when replacing disk of raid 5 set
  • From: Dan Egli <dan@xxxxxxxxxxxxxxxxxxxxxxx>
• Re: Problems with IDE Software RAID
  • From: David J Craigon <david@xxxxxxxxxxxxxxxx>
• Software RAID level performance
  • From: "3tcdgwg3" <3tcdgwg3@xxxxxxxxxxx>
• Re: scsi raid controller in debian
  • From: Jan-Benedict Glaw <jbglaw@xxxxxxxxxx>
• scsi raid controller in debian
  • From: RSABROSO <RSABROSO@xxxxxxxxxxx>
• OT Ramblings about a bugzilla report: was Re: Problems with IDE Software RAID
  • From: Mike Dresser <mdresser_l@xxxxxxxxxxxxxxxxxx>
• Problems with IDE Software RAID
  • From: David J Craigon <david@xxxxxxxxxxxxxxxx>
• [PATCH] md - fix return code in set_disk_faulty()
  • From: Mike Tran <mhtran@xxxxxxxxxx>
• Drives labeled as faulty by mdadm but are present
  • From: AndyLiebman@xxxxxxx
• Dunya Turuna Karavan Arkadaþý/Looking for a Caravan Mate For travel
  • From: "KaravnalaDünyaTuru/TourByCaravan" <evileye@xxxxxxxx>
• Re: many ide drives, raid0/raid5
  • From: Mike Tran <mhtran@xxxxxxxxxx>
• Re: lock failure when creating raid on 2.6.0-test9
  • From: Wichert Akkerman <wichert@xxxxxxxxx>
• lock failure when creating raid on 2.6.0-test9
  • From: Wichert Akkerman <wichert@xxxxxxxxx>
• 15 ide driver, raid0 / raid5
  • From: Florian Reitmeir <fr@xxxxxxxxx>
• many ide drives, raid0/raid5
  • From: Florian Reitmeir <squat@xxxxxxxx>
• Re: Booting from a raid1 device ?
  • From: "Bill Rugolsky Jr." <brugolsky@xxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: RAID 10 and Persistent Superblock
  • From: "Rechenberg, Andrew" <ARechenberg@xxxxxxxxxxxxxxxxxxxxxxxxx>
• Segmentation Fault on Raidstop
  • From: AndyLiebman@xxxxxxx
• RAID 10 and Persistent Superblock
  • From: AndyLiebman@xxxxxxx
• Re: Booting from a raid1 device ?
  • From: "Eric Wood" <eric@xxxxxxxxxxxxx>
• Re: announce: tiny raidtools-alike for use e.g. in initrd
  • From: Luca Berra <bluca@xxxxxxxxxx>
• Re: announce: tiny raidtools-alike for use e.g. in initrd
  • From: Luca Berra <bluca@xxxxxxxxxx>
• Re: Booting from a raid1 device ?
  • From: Luca Berra <bluca@xxxxxxxxxx>
• Re: ANNOUNCE: User-space System Device Enumation (uSDE)
  • From: "Dave Dodge" <dododge@xxxxxxxxx>
• Re: ANNOUNCE: User-space System Device Enumation (uSDE)
  • From: Greg KH <greg@xxxxxxxxx>
• Re: ANNOUNCE: User-space System Device Enumation (uSDE)
  • From: David Dodge <dododge@xxxxxxxxx>
• Re: mdadm --assemble --scan hassles....
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• RE: Booting from a raid1 device ?
  • From: "Cress, Andrew R" <andrew.r.cress@xxxxxxxxx>
• Re: Booting from a raid1 device ?
  • From: Michael Tokarev <mjt@xxxxxxxxxx>
• RE: Booting from a raid1 device ?
  • From: "Cress, Andrew R" <andrew.r.cress@xxxxxxxxx>
• Re: new problem has developed
  • From: maarten van den Berg <maarten@xxxxxxx>
• Re: Booting from a raid1 device ?
  • From: Lars Marowsky-Bree <lmb@xxxxxxx>
• announce: tiny raidtools-alike for use e.g. in initrd
  • From: Michael Tokarev <mjt@xxxxxxxxxx>
• Re: mdadm --assemble --scan hassles....
  • From: Hendrik Visage <hvisage@xxxxxxxxxxxxxx>
• Re: mdadm --assemble --scan hassles....
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Re: [cgl_discussion] Re: ANNOUNCE: User-space System Device Enumation (uSDE)
  • From: Greg KH <greg@xxxxxxxxx>
• Re: Booting from a raid1 device ?
  • From: Michael Tokarev <mjt@xxxxxxxxxx>
• Re: [cgl_discussion] Re: ANNOUNCE: User-space System Device Enumation (uSDE)
  • From: Rusty Lynch <rusty@xxxxxxxxxxxxxxxxxx>
• Re: [cgl_discussion] RE: ANNOUNCE: User-space System Device Enumation (uSDE)
  • From: Greg KH <greg@xxxxxxxxx>
• Re: ANNOUNCE: User-space System Device Enumation (uSDE)
  • From: Greg KH <greg@xxxxxxxxx>
• MDADM Guru Needed
  • From: AndyLiebman@xxxxxxx
• Re: [cgl_discussion] RE: ANNOUNCE: User-space System Device Enumation (uSDE)
  • From: Eric.Chacron@xxxxxxxxxx
• RE: ANNOUNCE: User-space System Device Enumation (uSDE)
  • From: Steven Dake <sdake@xxxxxxxxxx>
• RE: Booting from a raid1 device ?
  • From: "Cress, Andrew R" <andrew.r.cress@xxxxxxxxx>
• Re: mdadm --assemble --scan hassles....
  • From: Hendrik Visage <hvisage@xxxxxxxxxxxxxx>
• RE: ANNOUNCE: User-space System Device Enumation (uSDE)
  • From: "Guo, Min" <min.guo@xxxxxxxxx>
• Re: I'm about ready to do SW-Raid5 - pointers needed
  • From: Maurice Hilarius <maurice@xxxxxxxxxxxx>
• Re: mdadm --assemble --scan hassles....
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• ANNOUNCE: mdadm 1.4.0 - A tools for managing Soft RAID under Linux
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Re: ANNOUNCE: User-space System Device Enumation (uSDE)
  • From: Greg KH <greg@xxxxxxxxx>
• Re: Booting from a raid1 device ?
  • From: Sandro Dentella <sandro.dentella@xxxxxx>
• reconstruction -- where is the upper bound?
  • From: mjstumpf <mjstumpf@xxxxxxxxx>
• Re: reconstruction -- where is the upper bound?
  • From: seth vidal <skvidal@xxxxxxxxxxxx>
• Re: I'm about ready to do SW-Raid5 - pointers needed
  • From: maarten van den Berg <maarten@xxxxxxx>
• Re: I'm about ready to do SW-Raid5 - pointers needed
  • From: Gordon Henderson <gordon@xxxxxxxxxx>
• Re: I'm about ready to do SW-Raid5 - pointers needed
  • From: jlewis@xxxxxxxxx
• Re: ANNOUNCE: User-space System Device Enumation (uSDE)
  • From: Steven Dake <sdake@xxxxxxxxxx>
• Re: I'm about ready to do SW-Raid5 - pointers needed
  • From: Gordon Henderson <gordon@xxxxxxxxxx>
• Re: I'm about ready to do SW-Raid5 - pointers needed
  • From: Norman Schmidt <norman.schmidt@xxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: Booting from a raid1 device ?
  • From: "Michael" <michael@xxxxxxxxxxxxxxxxxxx>
• Re: AW: RAID1 VS RAID5
  • From: Mario Giammarco <mgiammarco@xxxxxxxxxxx>
• Re: I'm about ready to do SW-Raid5 - pointers needed
  • From: Gordon Henderson <gordon@xxxxxxxxxx>
• Re: I'm about ready to do SW-Raid5 - pointers needed
  • From: maarten van den Berg <maarten@xxxxxxx>
• Re: I'm about ready to do SW-Raid5 - pointers needed
  • From: Gordon Henderson <gordon@xxxxxxxxxx>
• Re: I'm about ready to do SW-Raid5 - pointers needed
  • From: maarten van den Berg <maarten@xxxxxxx>
• Re: mdadm --assemble --scan hassles....
  • From: rob <rob@xxxxxxxxxxxxxxxxx>
• Re: Booting from a raid1 device ?
  • From: Lars Marowsky-Bree <lmb@xxxxxxx>
• Re: ANNOUNCE: User-space System Device Enumation (uSDE)
  • From: Lars Marowsky-Bree <lmb@xxxxxxx>
• AW: RAID1 VS RAID5
  • From: "Martin Bene" <martin.bene@xxxxxxxxxxxxx>
• Re: RAID1 VS RAID5
  • From: Mario Giammarco <mgiammarco@xxxxxxxxxxx>
• Re: RAID1 VS RAID5
  • From: Mario Giammarco <mgiammarco@xxxxxxxxxxx>
• Re: RAID1 VS RAID5
  • From: Mario Giammarco <mgiammarco@xxxxxxxxxxx>
• Re: I'm about ready to do SW-Raid5 - pointers needed
  • From: Hermann Himmelbauer <dusty@xxxxxxxxxxxxxxxxxxxx>
• Re: I'm about ready to do SW-Raid5 - pointers needed
  • From: Gordon Henderson <gordon@xxxxxxxxxx>
• Re: I'm about ready to do SW-Raid5 - pointers needed
  • From: Hermann Himmelbauer <dusty@xxxxxxxxxxxxxxxxxxxx>
• Spinning down disks [Re: I'm about ready to do SW-Raid5 - pointers needed]
  • From: Gordon Henderson <gordon@xxxxxxxxxx>
• Re: mdadm --assemble --scan hassles....
  • From: Hendrik Visage <hvisage@xxxxxxxxxxxxxx>
• Re: I'm about ready to do SW-Raid5 - pointers needed
  • From: Luke Rosenthal <luke@xxxxxxxx>
• Re: I'm about ready to do SW-Raid5 - pointers needed
  • From: rob <rob@xxxxxxxxxxxxxxxxx>
• Re: I'm about ready to do SW-Raid5 - pointers needed
  • From: David Anderson <david.anderson@xxxxxxxxxx>
• Re: I'm about ready to do SW-Raid5 - pointers needed
  • From: maarten van den Berg <maarten@xxxxxxx>
• Re: I'm about ready to do SW-Raid5 - pointers needed
  • From: David Anderson <david.anderson@xxxxxxxxxx>
• Re: I'm about ready to do SW-Raid5 - pointers needed
  • From: maarten van den Berg <maarten@xxxxxxx>
• Re: I'm about ready to do SW-Raid5 - pointers needed
  • From: David Anderson <david.anderson@xxxxxxxxxx>
• Re: I'm about ready to do SW-Raid5 - pointers needed
  • From: maarten van den Berg <maarten@xxxxxxx>
• Re: mdadm --assemble --scan hassles....
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Re: I'm about ready to do SW-Raid5 - pointers needed
  • From: David Anderson <david.anderson@xxxxxxxxxx>
• Boot+Root+Raid+Lilo howto
  • From: "Michael" <michael@xxxxxxxxxxxxxxxxxxx>
• I'm about ready to do SW-Raid5 - pointers needed
  • From: berk walker <berk.walker@xxxxxxxxxxx>
• Re: ANNOUNCE: User-space System Device Enumation (uSDE)
  • From: Steven Dake <sdake@xxxxxxxxxx>
• Re: ANNOUNCE: User-space System Device Enumation (uSDE)
  • From: Mark Bellon <mbellon@xxxxxxxxxx>
• Re: Booting from a raid1 device ?
  • From: maarten van den Berg <maarten@xxxxxxx>
• Re: Booting from a raid1 device ?
  • From: Hermann Himmelbauer <dusty@xxxxxxxxxxxxxxxxxxxx>
• RE: Booting from a raid1 device ?
  • From: "Cress, Andrew R" <andrew.r.cress@xxxxxxxxx>
• Re: ANNOUNCE: User-space System Device Enumation (uSDE)
  • From: Mark Bellon <mbellon@xxxxxxxxxx>
• Re: ANNOUNCE: User-space System Device Enumation (uSDE)
  • From: Lars Marowsky-Bree <lmb@xxxxxxx>
• ANNOUNCE: User-space System Device Enumation (uSDE)
  • From: Mark Bellon <mbellon@xxxxxxxxxx>
• Re: Booting from a raid1 device ?
  • From: Paul Clements <Paul.Clements@xxxxxxxxxxxx>
• Re: RAID1 VS RAID5
  • From: "Andrew Herdman" <andrew@xxxxxxxxx>
• Re: Booting from a raid1 device ?
  • From: Gordon Henderson <gordon@xxxxxxxxxx>
• Re: RAID1 VS RAID5
  • From: Hermann Himmelbauer <dusty@xxxxxxxxxxxxxxxxxxxx>
• Booting from a raid1 device ?
  • From: Don Jessup <donj@xxxxxxxxx>
• Re: RAID1 VS RAID5
  • From: Lars Marowsky-Bree <lmb@xxxxxxx>
• Re: RAID1 VS RAID5
  • From: Gordon Henderson <gordon@xxxxxxxxxx>
• Re: dean's linux raid wishlist
  • From: "Bill Rugolsky Jr." <brugolsky@xxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: RAID1 VS RAID5
  • From: Jeff Woods <kazrak+kernel@xxxxxxxxxxx>
• Re: RAID1 VS RAID5
  • From: maarten van den Berg <maarten@xxxxxxx>
• Re: RAID1 VS RAID5
  • From: Hermann Himmelbauer <dusty@xxxxxxxxxxxxxxxxxxxx>
• Re: RAID1 VS RAID5
  • From: Jeff Woods <kazrak+kernel@xxxxxxxxxxx>
• Re: RAID1 VS RAID5
  • From: Lars Marowsky-Bree <lmb@xxxxxxx>
• Re: RAID1 VS RAID5
  • From: Gordon Henderson <gordon@xxxxxxxxxx>
• Re: RAID1 VS RAID5
  • From: Hermann Himmelbauer <dusty@xxxxxxxxxxxxxxxxxxxx>
• Re: RAID1 VS RAID5
  • From: Hermann Himmelbauer <dusty@xxxxxxxxxxxxxxxxxxxx>
• dean's linux raid wishlist
  • From: dean gaudet <dean-list-linux-raid@xxxxxxxxxx>
• Re: recovery of hosed raid5 array
  • From: dean gaudet <dean-list-linux-raid@xxxxxxxxxx>
• Re: RAID1 recovery fails with 2.6 kernel
  • From: spam@xxxxxxxxxxxxxxxxxxxx (Dick Streefland)
• new problem has developed
  • From: maarten van den Berg <maarten@xxxxxxx>
• Re: recovery of hosed raid5 array
  • From: Jason Lunz <lunz@xxxxxxxxxxxx>
• Re: recovery of hosed raid5 array
  • From: Mike Fedyk <mfedyk@xxxxxxxxxxxxx>
• Re: RAID1 VS RAID5
  • From: Mario Giammarco <mgiammarco@xxxxxxxxxxx>
• Re: RAID1 VS RAID5
  • From: Matti Aarnio <matti.aarnio@xxxxxxxxxxx>
• Re: RAID1 VS RAID5
  • From: maarten van den Berg <maarten@xxxxxxx>
• RAID1 VS RAID5
  • From: Mario Giammarco <mgiammarco@xxxxxxxxxxx>
• RAID1 VS RAID5
  • From: Mario Giammarco <mgiammarco@xxxxxxxxxxx>
• Re: mdadm --assemble --scan hassles....
  • From: Hendrik Visage <hvisage@xxxxxxxxxxxxxx>
• Re: Making RAIDS with firewire drives -- changing device IDs.
  • From: seth vidal <skvidal@xxxxxxxxxxxx>
• Making RAIDS with firewire drives -- changing device IDs.
  • From: AndyLiebman@xxxxxxx
• Re: AW: two-disk-failure question
  • From: maarten van den Berg <maarten@xxxxxxx>
• Re: Resync Question
  • From: Paul Clements <Paul.Clements@xxxxxxxxxxxx>
• Resync Question
  • From: Don Jessup <donj@xxxxxxxxx>
• Resync Question
  • From: Don Jessup <donj@xxxxxxxxx>
• Kernel OOps: bad magic 0 while RAID5 resync operation
  • From: "Bo Moon" <bo@xxxxxxxxxxxxxxxxxxxxxx>
• Re: RAID1 recovery fails with 2.6 kernel
  • From: spam@xxxxxxxxxxxxxxxxxxxx (Dick Streefland)
• Re: RAID1 recovery fails with 2.6 kernel
  • From: Mike Tran <mhtran@xxxxxxxxxx>
• Re: two-disk-failure question
  • From: "Ryan B. Lynch" <rlynch@xxxxxxxxxxxx>
• Re: Consensus on controllers?
  • From: Hermann Himmelbauer <dusty@xxxxxxxxxxxxxxxxxxxx>
• Consensus on controllers?
  • From: Bob Hillegas <bobhillegas@xxxxxxxxxxxxxx>
• Re: scsi card recommendations
  • From: "Michael" <michael@xxxxxxxxxxxxxxxxxxx>
• resyncing
  • From: Scott Kopel <skopel@xxxxxxxxxxxxxxx>
• Re: Help resyncing/remounting raid5 array please
  • From: Paul Clements <Paul.Clements@xxxxxxxxxxxx>
• Help resyncing/remounting raid5 array please
  • From: "Ruth Ivimey-Cook" <Ruth.Ivimey-Cook@xxxxxxxxxx>
• Re: scsi card recommendations
  • From: Hermann Himmelbauer <dusty@xxxxxxxxxxxxxxxxxxxx>
• ataraid in 2.6?
  • From: Mental Patient <mental@xxxxxxxxxxxxxx>
• Re: scsi card recommendations
  • From: jlewis@xxxxxxxxx
• Re: scsi card recommendations
  • From: rob <rob@xxxxxxxxxxxxxxxxx>
• scsi card recommendations
  • From: "Michael" <michael@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] md - Use sector rather than block numbers when splitting raid0 requests.
  • From: Andy Polyakov <appro@xxxxxxxxxxxxxx>
• Re: RAID1 recovery fails with 2.6 kernel
  • From: spam@xxxxxxxxx (Dick Streefland)
• Re: RAID1 recovery fails with 2.6 kernel
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• [PATCH] md - Use sector rather than block numbers when splitting raid0 requests.
  • From: NeilBrown <neilb@xxxxxxxxxxxxxxx>
• RAID1 recovery fails with 2.6 kernel
  • From: spam@xxxxxxxxxxxxxxxxxxxx (Dick Streefland)
• chunk size.
  • From: jshankar <jshankar@xxxxxxxxxxxxxxxx>
• Re: Which drives below to which controller?...clarified
  • From: "jeff millar" <wa1hco@xxxxxxxxxxxx>
• AW: two-disk-failure question
  • From: "Martin Bene" <martin.bene@xxxxxxxxxxxxx>
• Which drives below to which controller?
  • From: "jeff millar" <wa1hco@xxxxxxxxxxxx>
• two-disk-failure question
  • From: maarten van den Berg <maarten@xxxxxxx>
• subsecond RAID 1 failover using SCSI targets
  • From: Steven Dake <sdake@xxxxxxxxxx>
• Raid5 Poor Permformance
  • From: Don Jessup <donj@xxxxxxxxx>
• Re: recovery question?
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Re: speed_limit_min probs, thoughts
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Re: mdadm --assemble --scan hassles....
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Re: possible to use 1 drive as hot failover for 2 raid1's?
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• RE: raid0 and iscsi
  • From: jshankar <jshankar@xxxxxxxxxxxxxxxx>
• Re: swap on raid 1
  • From: Thomas Steudten <alpha@xxxxxxxxxxxx>
• Re: swap on raid 1
  • From: Gordon Henderson <gordon@xxxxxxxxxx>
• Re: swap on raid 1
  • From: Hermann Himmelbauer <dusty@xxxxxxxxxxxxxxxxxxxx>
• Re: 3ware 7500-8 on 32 & 64 bit PCi
  • From: Joshua Baker-LePain <jlb17@xxxxxxxx>
• 3ware 7500-8 on 32 & 64 bit PCi
  • From: Farkas Levente <lfarkas@xxxxxxx>
• Re: swap on raid 1
  • From: Gordon Henderson <gordon@xxxxxxxxxx>
• swap on raid 1
  • From: skopel@xxxxxxxxxxxxxxx
• Re: Driver for BIOS-based software RAIDs
  • From: Lars Marowsky-Bree <lmb@xxxxxxx>
• Re: raid1 critical sections not protected in 2.4.x?
  • From: Lars Marowsky-Bree <lmb@xxxxxxx>
• Re: Antwort: Re: Swap on RAID1?
  • From: Hermann Himmelbauer <dusty@xxxxxxxxxxxxxxxxxxxx>
• Antwort: Re: Swap on RAID1?
  • From: alexander.weber@xxxxxx
• Re: 4*300GB SW-RAID5 - bad idea?
  • From: Gordon Henderson <gordon@xxxxxxxxxx>
• Re: Swap on RAID1?
  • From: Gordon Henderson <gordon@xxxxxxxxxx>
• Re: raid0 and iscsi
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Re: raid0 and iscsi
  • From: rob <rob@xxxxxxxxxxxxxxxxx>
• Re: missing superblock on RAID5
  • From: rob <rob@xxxxxxxxxxxxxxxxx>
• Re: Linux drivers for ICH5R (RAID1) and Promise PDC20378, Performance
  • From: rob <rob@xxxxxxxxxxxxxxxxx>
• Re: missing superblock on RAID5
  • From: Victor <linux-raid@xxxxxxxxx>
• Re: raid0 and iscsi
  • From: rob <rob@xxxxxxxxxxxxxxxxx>
• Re: Swap on RAID1?
  • From: Paul Clements <Paul.Clements@xxxxxxxxxxxx>
• Re: missing superblock on RAID5
  • From: rob <rob@xxxxxxxxxxxxxxxxx>
• Re: Swap on RAID1?
  • From: Matti Aarnio <matti.aarnio@xxxxxxxxxxx>
• Re: 4*300GB SW-RAID5 - bad idea?
  • From: Matt Simonsen <matt_lists@xxxxxxxxxxxxxx>
• Re: Linux drivers for ICH5R (RAID1) and Promise PDC20378, Performance
  • From: Hermann Himmelbauer <dusty@xxxxxxxxxxxxxxxxxxxx>