> Hi All, > > I am trying to get an adaptec 1210 serial ata raid controller working under > 2.6.0. I've also tried 2.4.23 > I've found a patch for 2.6.0 by Mark Haverkamp at > http://marc.theaimsgroup.com/?l=linux-scsi&m=10663501617378&w=2 and also a > patch (for 2.4.22) by someone else (not sure who) which just resulted in > lots of "lost interrupt" errors at bootup and it took around 30 minutes to > boot. The Adaptec BIOS masks interrups on the card. You can re-enable interrupts by clearing bits 6 & 7 at PCI configuration space address 0x8a. -- Justin - To unsubscribe from this list: send the line "unsubscribe linux-raid" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
