Linux RAID Storage Date Index

• Thread Index

• Re: the '--setra 65536' mistery, analysis and WTF?
  • From: pg_lxra@xxxxxxxxxxxxxxxxxxx (Peter Grandi)
• ioatdma
  • From: Bernd Schubert <bs@xxxxxxxxx>
• ioatdma
  • From: Bernd Schubert <bs@xxxxxxxxx>
• Change Chunk Size on Array?
  • From: crshman <crshman@xxxxxxxxx>
• [git pull] async_tx and a fsldma fix for 2.6.25-rc
  • From: Dan Williams <dan.j.williams@xxxxxxxxx>
• Re: Useful benchmarking tools for RAID
  • From: Richard Scobie <richard@xxxxxxxxxxx>
• Re: Useful benchmarking tools for RAID
  • From: pg_lxra@xxxxxxxxxxxxxxxxxxx (Peter Grandi)
• Re: software for making initrd's with raid support
  • From: Luca Berra <bluca@xxxxxxxxxx>
• Re: Multiple partitions on the same disk
  • From: Richard Scobie <richard@xxxxxxxxxxx>
• Re: Redundancy check using "echo check > sync_action": error reporting?
  • From: Janek Kozicki <janek_listy@xxxxx>
• Redundancy check using "echo check > sync_action": error reporting?
  • From: Bas van Schaik <bas@xxxxxxxx>
• irc channel for linux-raid
  • From: Keld Jørn Simonsen <keld@xxxxxxxx>
• Re: software for making initrd's with raid support
  • From: Keld Jørn Simonsen <keld@xxxxxxxx>
• Re: software for making initrd's with raid support
  • From: Luca Berra <bluca@xxxxxxxxxx>
• performance problems with raid10,f2
  • From: Keld Jørn Simonsen <keld@xxxxxxxx>
• Multiple partitions on the same disk
  • From: "Cody" <cody@xxxxxxxxxxxxx>
• Re: software for making initrd's with raid support
  • From: Keld Jørn Simonsen <keld@xxxxxxxx>
• Re: software for making initrd's with raid support
  • From: Luca Berra <bluca@xxxxxxxxxx>
• Re: auto-assembling arrays without a configuration file
  • From: Neil Brown <neilb@xxxxxxx>
• [PATCH] md: Remove the 'super' sysfs attribute from devices in an 'md' array.
  • From: NeilBrown <neilb@xxxxxxx>
• Re: sysfs Kernel BUG when RAID bitmap file has IO errors
  • From: Neil Brown <neilb@xxxxxxx>
• Re: Useful benchmarking tools for RAID
  • From: Bryan Mark Mesich <bmesich@xxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: Useful benchmarking tools for RAID
  • From: Richard Scobie <richard@xxxxxxxxxxx>
• Re: Useful benchmarking tools for RAID
  • From: pg_lxra@xxxxxxxxxxxxxxxxxxx (Peter Grandi)
• Re: first partition on partitionable RAID-5 array
  • From: pg_lxra@xxxxxxxxxxxxxxxxxxx (Peter Grandi)
• Re: Useful benchmarking tools for RAID
  • From: michael@xxxxxxxxx
• Re: the '--setra 65536' mistery, analysis and WTF?
  • From: Nat Makarevitch <nat@xxxxxxxxxxxxxxx>
• Re: software for making initrd's with raid support
  • From: Keld Jørn Simonsen <keld@xxxxxxxx>
• How to grow RAID1 mirror on top of LVM?
  • From: Anton Altaparmakov <aia21@xxxxxxxxx>
• Re: software for making initrd's with raid support
  • From: Luca Berra <bluca@xxxxxxxxxx>
• MDP major registration
  • From: Hubert Verstraete <hubskml@xxxxxxx>
• software for making initrd's with raid support
  • From: Keld Jørn Simonsen <keld@xxxxxxxx>
• Useful benchmarking tools for RAID
  • From: Bryan Mark Mesich <bmesich@xxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: sysfs Kernel BUG when RAID bitmap file has IO errors
  • From: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
• Re: sysfs Kernel BUG when RAID bitmap file has IO errors
  • From: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
• Re: LVM performance
  • From: Guntsche Michael <mike@xxxxxxxxxxxx>
• Re: LVM performance
  • From: pg_lxra@xxxxxxxxxxxxxxxxxxxxxx (Peter Grandi)
• Help! 3ware 7508-8: i/o errors, now arry not recognized anymore ...
  • From: "Christian Pernegger" <pernegger@xxxxxxxxx>
• first partition on partitionable RAID-5 array
  • From: Hubert Verstraete <hubskml@xxxxxxx>
• Re: LVM performance
  • From: Michael Guntsche <mike@xxxxxxxxxxxx>
• Re: [dm-crypt] Re: md-raid5, dm-crypt, alignment and readahead
  • From: "Christian Pernegger" <pernegger@xxxxxxxxx>
• Re: [dm-crypt] Re: md-raid5, dm-crypt, alignment and readahead
  • From: Pasi Kärkkäinen <pasik@xxxxxx>
• Re: Online resize
  • From: Wayne Gemmell <wayne@xxxxxxxxxxxxxxxx>
• Re: LVM performance
  • From: pg_lxra@xxxxxxxxxxxxxxxxxxx (Peter Grandi)
• Re: md-raid5, dm-crypt, alignment and readahead
  • From: pg_lxra@xxxxxxxxxxxxxxxxxxx (Peter Grandi)
• Re: sysfs Kernel BUG when RAID bitmap file has IO errors
  • From: Tomasz Chmielewski <mangoo@xxxxxxxx>
• sysfs Kernel BUG when RAID bitmap file has IO errors
  • From: Tomasz Chmielewski <mangoo@xxxxxxxx>
• Re: Online resize
  • From: Michael Tokarev <mjt@xxxxxxxxxx>
• Re: Online resize
  • From: Robin Hill <robin@xxxxxxxxxxxxxxx>
• Re: Online resize
  • From: Wayne Gemmell <wayne@xxxxxxxxxxxxxxxx>
• Re: Online resize
  • From: Michael Tokarev <mjt@xxxxxxxxxx>
• Re: Online resize
  • From: Wayne Gemmell <wayne@xxxxxxxxxxxxxxxx>
• Re: Online resize
  • From: Wayne Gemmell <wayne@xxxxxxxxxxxxxxxx>
• media error but no I/O error
  • From: Pallai Roland <dap@xxxxxxxxxxxxx>
• Re: md-raid5, dm-crypt, alignment and readahead
  • From: "Christian Pernegger" <pernegger@xxxxxxxxx>
• Re: data corruption: ext3/lvm2/md/mptsas/vitesse/seagate
  • From: Marc Bejarano <beej@xxxxxxxxxxxx>
• problem with JBOD mode on MegaRAID
  • From: Louis-David Mitterrand <vindex+lists-linux-raid@xxxxxxxxxxx>
• Re: need help, possibly shred my array, no backups, debian install issue - safe for now
  • From: Dexter Filmore <Dexter.Filmore@xxxxxx>
• Re: Online resize
  • From: Robin Hill <robin@xxxxxxxxxxxxxxx>
• need help, possibly shred my array, no backups, debian install issue
  • From: Dexter Filmore <Dexter.Filmore@xxxxxx>
• Re: Online resize
  • From: Wayne Gemmell <wayne@xxxxxxxxxxxxxxxx>
• Re: Online resize
  • From: Robin Hill <robin@xxxxxxxxxxxxxxx>
• Online resize
  • From: Wayne Gemmell <wayne@xxxxxxxxxxxxxxxx>
• Re: data corruption: ext3/lvm2/md/mptsas/vitesse/seagate
  • From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
• Re: data corruption: ext3/lvm2/md/mptsas/vitesse/seagate
  • From: Janek Kozicki <janek_listy@xxxxx>
• md-raid5, dm-crypt, alignment and readahead
  • From: "Christian Pernegger" <pernegger@xxxxxxxxx>
• Re: data corruption: ext3/lvm2/md/mptsas/vitesse/seagate
  • From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
• Re: data corruption: ext3/lvm2/md/mptsas/vitesse/seagate
  • From: Marc Bejarano <beej@xxxxxxxxxxxx>
• Re: auto-assembling arrays without a configuration file
  • From: Andre Noll <maan@xxxxxxxxxxxxxxx>
• Re: Setting up md-raid5: observations, errors, questions
  • From: "Christian Pernegger" <pernegger@xxxxxxxxx>
• Re: auto-assembling arrays without a configuration file
  • From: Keld Jørn Simonsen <keld@xxxxxxxx>
• Re: LVM performance
  • From: Oliver Martin <oliver.martin@xxxxxxxxxxxxxxxxxxxx>
• Re: LVM performance
  • From: Michael Guntsche <mike@xxxxxxxxxxxx>
• Re: LVM performance
  • From: Richard Scobie <richard@xxxxxxxxxxx>
• Re: LVM performance
  • From: Michael Guntsche <mike@xxxxxxxxxxxx>
• Re: LVM performance
  • From: Richard Scobie <richard@xxxxxxxxxxx>
• Re: LVM performance
  • From: Michael Guntsche <mike@xxxxxxxxxxxx>
• Re: LVM performance
  • From: Oliver Martin <oliver.martin@xxxxxxxxxxxxxxxxxxxx>
• Re: auto-assembling arrays without a configuration file
  • From: Neil Brown <neilb@xxxxxxx>
• the '--setra 65536' mistery, analysis and WTF?
  • From: <pg_mh@xxxxxxxxxx>
• Re: LVM performance
  • From: Michael Guntsche <mike@xxxxxxxxxxxx>
• Re: LVM performance
  • From: Oliver Martin <oliver.martin@xxxxxxxxxxxxxxxxxxxx>
• Re: data corruption: ext3/lvm2/md/mptsas/vitesse/seagate
  • From: "Grant Grundler" <grundler@xxxxxxxxxx>
• Re: data corruption: ext3/lvm2/md/mptsas/vitesse/seagate
  • From: Bill Davidsen <davidsen@xxxxxxx>
• Re: auto-assembling arrays without a configuration file
  • From: Keld Jørn Simonsen <keld@xxxxxxxx>
• auto-assembling arrays without a configuration file
  • From: Keld Jørn Simonsen <keld@xxxxxxxx>
• Re: data corruption: ext3/lvm2/md/mptsas/vitesse/seagate
  • From: Marc Bejarano <beej@xxxxxxxxxxxx>
• Re: LVM performance
  • From: pg_lxra@xxxxxxxxxxxxxxxxxxx (Peter Grandi)
• Re: equal size not large enough for RAID1?
  • From: Lars Täuber <taeuber@xxxxxxx>
• Re: 16 HDDs too much for RAID6?
  • From: Lars Täuber <taeuber@xxxxxxx>
• Re: 16 HDDs too much for RAID6?
  • From: Andre Noll <maan@xxxxxxxxxxxxxxx>
• Re: 16 HDDs too much for RAID6?
  • From: Luca Berra <bluca@xxxxxxxxxx>
• [PATCH 002 of 2] md: Reduce CPU wastage on idle md array with a write-intent bitmap. fix
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH 001 of 2] md: Fix formatting error in /proc/mdstat.
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH 000 of 2] md: To more bugfixes for 2.6.25
  • From: NeilBrown <neilb@xxxxxxx>
• Re: equal size not large enough for RAID1?
  • From: Neil Brown <neilb@xxxxxxx>
• Re: data corruption: ext3/lvm2/md/mptsas/vitesse/seagate
  • From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
• Re: data corruption: ext3/lvm2/md/mptsas/vitesse/seagate
  • From: Janek Kozicki <janek_listy@xxxxx>
• Re: data corruption: ext3/lvm2/md/mptsas/vitesse/seagate
  • From: Steve Cousins <steve.cousins@xxxxxxxxx>
• data corruption: ext3/lvm2/md/mptsas/vitesse/seagate
  • From: Marc Bejarano <beej@xxxxxxxxxxxx>
• Re: [PATCH 001 of 9] md: Fix deadlock in md/raid1 and md/raid10 when handling a read error.
  • From: Janek Kozicki <janek_listy@xxxxx>
• Re: 16 HDDs too much for RAID6?
  • From: Andre Noll <maan@xxxxxxxxxxxxxxx>
• Re: RAID5 in sync does not populate slots sequentially, shows array as (somewhat) faulty
  • From: Rui Santos <rsantos@xxxxxxxxxxxx>
• Re: RAID-5 data corruption
  • From: Oliver Martin <oliver.martin@xxxxxxxxxxxxxxxxxxxx>
• Re: 16 HDDs too much for RAID6?
  • From: Lars Täuber <taeuber@xxxxxxx>
• Re: [PATCH 001 of 9] md: Fix deadlock in md/raid1 and md/raid10 when handling a read error.
  • From: Andre Noll <maan@xxxxxxxxxxxxxxx>
• Re: 16 HDDs too much for RAID6?
  • From: Andre Noll <maan@xxxxxxxxxxxxxxx>
• Re: equal size not large enough for RAID1?
  • From: Lars Täuber <taeuber@xxxxxxx>
• 16 HDDs too much for RAID6?
  • From: Lars Täuber <taeuber@xxxxxxx>
• Re: [PATCH 001 of 9] md: Fix deadlock in md/raid1 and md/raid10 when handling a read error.
  • From: Neil Brown <neilb@xxxxxxx>
• Re: RAID-5 data corruption
  • From: "Dan Williams" <dan.j.williams@xxxxxxxxx>
• RAID-5 data corruption
  • From: Oliver Martin <oliver.martin@xxxxxxxxxxxxxxxxxxxx>
• Revisiting performance of RAID 10,f2
  • From: Bruce Miller <subscribe@xxxxxxxxxxx>
• equal size not large enough for RAID1?
  • From: Lars Täuber <taeuber@xxxxxxx>
• Re: Setting up md-raid5: observations, errors, questions
  • From: "Christian Pernegger" <pernegger@xxxxxxxxx>
• Re: Severe slowdown with LVM on RAID, alignment problem? - Autodetect?
  • From: Janek Kozicki <janek_listy@xxxxx>
• Re: Linux and SSD and how to decrease io delay : question, please
  • From: Bill Davidsen <davidsen@xxxxxxx>
• Re: [PATCH 001 of 9] md: Fix deadlock in md/raid1 and md/raid10 when handling a read error.
  • From: Andre Noll <maan@xxxxxxxxxxxxxxx>
• Re: RAID5 in sync does not populate slots sequentially, shows array as (somewhat) faulty
  • From: Tor Arne Vestbø <torarnv@xxxxxxxxx>
• Re: RAID5 in sync does not populate slots sequentially, shows array as (somewhat) faulty
  • From: Peter Rabbitson <rabbit+list@xxxxxxxxx>
• Re: RAID5 in sync does not populate slots sequentially, shows array as (somewhat) faulty
  • From: Tor Arne Vestbø <torarnv@xxxxxxxxx>
• Re: RAID5 in sync does not populate slots sequentially, shows array as (somewhat) faulty
  • From: Peter Rabbitson <rabbit+list@xxxxxxxxx>
• Re: Creating RAID5 with four devices and end up with 5 (one removed and one spare). Why?
  • From: Tor Arne Vestbø <torarnv@xxxxxxxxx>
• Re: [PATCH 001 of 9] md: Fix deadlock in md/raid1 and md/raid10 when handling a read error.
  • From: Neil Brown <neilb@xxxxxxx>
• Re: Setting up md-raid5: observations, errors, questions
  • From: "Christian Pernegger" <pernegger@xxxxxxxxx>
• Re: RAID5 in sync does not populate slots sequentially, shows array as (somewhat) faulty
  • From: Bill Davidsen <davidsen@xxxxxxx>
• Re: Setting up md-raid5: observations, errors, questions
  • From: Bill Davidsen <davidsen@xxxxxxx>
• Re: Strange RAID-5 rebuild problem
  • From: Bill Davidsen <davidsen@xxxxxxx>
• Re: Corrupted RAID 50 (aparently?) array. Help needed.
  • From: Bill Davidsen <davidsen@xxxxxxx>
• Re: Linux and SSD and how to decrease io delay : question, please
  • From: Bill Davidsen <davidsen@xxxxxxx>
• Re: [PATCH 001 of 9] md: Fix deadlock in md/raid1 and md/raid10 when handling a read error.
  • From: Andre Noll <maan@xxxxxxxxxxxxxxx>
• Re: Strange RAID-5 rebuild problem
  • From: Michael Guntsche <mike@xxxxxxxxxxxx>
• Re: RAID5 in sync does not populate slots sequentially, shows array as (somewhat) faulty
  • From: Tor Arne Vestbø <torarnv@xxxxxxxxx>
• RAID5 in sync does not populate slots sequentially, shows array as (somewhat) faulty
  • From: Peter Rabbitson <rabbit+list@xxxxxxxxx>
• Re: Creating RAID5 with four devices and end up with 5 (one removed and one spare). Why?
  • From: Tor Arne Vestbø <torarnv@xxxxxxxxx>
• Re: Creating RAID5 with four devices and end up with 5 (one removed and one spare). Why?
  • From: "Mario 'BitKoenig' Holbe" <Mario.Holbe@xxxxxxxxxxxxx>
• Re: Creating RAID5 with four devices and end up with 5 (one removed and one spare). Why?
  • From: Tor Arne Vestbø <torarnv@xxxxxxxxx>
• Re: Creating RAID5 with four devices and end up with 5 (one removed and one spare). Why?
  • From: Robin Hill <robin@xxxxxxxxxxxxxxx>
• Creating RAID5 with four devices and end up with 5 (one removed and one spare). Why?
  • From: Tor Arne Vestbø <torarnv@xxxxxxxxx>
• Re: Setting up md-raid5: observations, errors, questions
  • From: "Christian Pernegger" <pernegger@xxxxxxxxx>
• Re: Setting up md-raid5: observations, errors, questions
  • From: Michael Tokarev <mjt@xxxxxxxxxx>
• Re: Strange RAID-5 rebuild problem
  • From: Neil Brown <neilb@xxxxxxx>
• Re: Corrupted RAID 50 (aparently?) array. Help needed.
  • From: "Nicolas Mella" <nmella@xxxxxxxxx>
• [PATCH 009 of 9] md: The md RAID10 resync thread could cause a md RAID10 array deadlock
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH 008 of 9] md: Fix possible raid1/raid10 deadlock on read error during resync.
  • From: NeilBrown <neilb@xxxxxxx>
• Re: Setting up md-raid5: observations, errors, questions
  • From: "Christian Pernegger" <pernegger@xxxxxxxxx>
• [PATCH 007 of 9] md: Don't attempt read-balancing for raid10 'far' layouts.
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH 006 of 9] md: Lock access to rdev attributes properly
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH 005 of 9] md: Make sure a reshape is started when device switches to read-write.
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH 004 of 9] md: Clean up irregularity with raid autodetect.
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH 003 of 9] md: Guard against possible bad array geometry in v1 metadata.
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH 002 of 9] md: Reduce CPU wastage on idle md array with a write-intent bitmap.
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH 001 of 9] md: Fix deadlock in md/raid1 and md/raid10 when handling a read error.
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH 000 of 9] md: Introduction EXPLAIN PATCH SET HERE
  • From: NeilBrown <neilb@xxxxxxx>
• Re: [PATCH] The md RAID10 resync thread could cause a md RAID10 array deadlock
  • From: Neil Brown <neilb@xxxxxxx>
• Re: [BUGREPORT] The kernel thread for md RAID10 could cause a md RAID10 array deadlock
  • From: Neil Brown <neilb@xxxxxxx>
• Re: Setting up md-raid5: observations, errors, questions
  • From: Michael Tokarev <mjt@xxxxxxxxxx>
• Re: Setting up md-raid5: observations, errors, questions
  • From: "Christian Pernegger" <pernegger@xxxxxxxxx>
• Re: Strange RAID-5 rebuild problem
  • From: Michael Guntsche <mike@xxxxxxxxxxxx>
• Re: Setting up md-raid5: observations, errors, questions
  • From: Michael Guntsche <mike@xxxxxxxxxxxx>
• Re: Severe slowdown with LVM on RAID, alignment problem?
  • From: Bill Davidsen <davidsen@xxxxxxx>
• Re: Setting up md-raid5: observations, errors, questions
  • From: "Christian Pernegger" <pernegger@xxxxxxxxx>
• Re: Setting up md-raid5: observations, errors, questions
  • From: Michael Tokarev <mjt@xxxxxxxxxx>
• Re: Setting up md-raid5: observations, errors, questions
  • From: "Christian Pernegger" <pernegger@xxxxxxxxx>
• Re: Setting up md-raid5: observations, errors, questions
  • From: Michael Tokarev <mjt@xxxxxxxxxx>
• Re: Setting up md-raid5: observations, errors, questions
  • From: "Christian Pernegger" <pernegger@xxxxxxxxx>
• Re: Setting up md-raid5: observations, errors, questions
  • From: Janek Kozicki <janek_listy@xxxxx>
• Re: Setting up md-raid5: observations, errors, questions
  • From: "Christian Pernegger" <pernegger@xxxxxxxxx>
• Re: Setting up md-raid5: observations, errors, questions
  • From: Robin Hill <robin@xxxxxxxxxxxxxxx>
• Re: Setting up md-raid5: observations, errors, questions
  • From: "Christian Pernegger" <pernegger@xxxxxxxxx>
• Re: Setting up md-raid5: observations, errors, questions
  • From: "Christian Pernegger" <pernegger@xxxxxxxxx>
• Re: Setting up md-raid5: observations, errors, questions
  • From: Janek Kozicki <janek_listy@xxxxx>
• Re: Setting up md-raid5: observations, errors, questions
  • From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
• Re: Setting up md-raid5: observations, errors, questions
  • From: "Christian Pernegger" <pernegger@xxxxxxxxx>
• Re: Setting up md-raid5: observations, errors, questions
  • From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
• Re: Strange RAID-5 rebuild problem
  • From: Robin Hill <robin@xxxxxxxxxxxxxxx>
• Setting up md-raid5: observations, errors, questions
  • From: "Christian Pernegger" <pernegger@xxxxxxxxx>
• Re: Strange RAID-5 rebuild problem
  • From: Michael Guntsche <mike@xxxxxxxxxxxx>
• Re: Strange RAID-5 rebuild problem
  • From: Michael Tokarev <mjt@xxxxxxxxxx>
• Re: 2x6 or 3x4 raid10 arrays ?
  • From: Nat Makarevitch <nat@xxxxxxxxxxxxxxx>
• Re: Strange RAID-5 rebuild problem
  • From: Michael Guntsche <mike@xxxxxxxxxxxx>
• Re: Strange RAID-5 rebuild problem
  • From: Michael Guntsche <mike@xxxxxxxxxxxx>
• Re: 2x6 or 3x4 raid10 arrays ?
  • From: Keld Jørn Simonsen <keld@xxxxxxxx>
• Re: Strange RAID-5 rebuild problem
  • From: Michael Guntsche <mike@xxxxxxxxxxxx>
• Re: 2x6 or 3x4 raid10 arrays ?
  • From: Nat Makarevitch <nat@xxxxxxxxxxxxxxx>
• [Fwd: Strange RAID-5 rebuild problem]
  • From: Bill Davidsen <davidsen@xxxxxxx>
• Re: Strange RAID-5 rebuild problem
  • From: Michael Guntsche <mike@xxxxxxxxxxxx>
• Re: Severe slowdown with LVM on RAID, alignment problem?
  • From: Michael Guntsche <mike@xxxxxxxxxxxx>
• Re: 2x6 or 3x4 raid10 arrays ?
  • From: Keld Jørn Simonsen <keld@xxxxxxxx>
• Strange RAID-5 rebuild problem
  • From: Michael Guntsche <mike@xxxxxxxxxxxx>
• Re: 2x6 or 3x4 raid10 arrays ?
  • From: Keld Jørn Simonsen <keld@xxxxxxxx>
• Re: Severe slowdown with LVM on RAID, alignment problem?
  • From: Bill Davidsen <davidsen@xxxxxxx>
• Re: 2x6 or 3x4 raid10 arrays ?
  • From: Keld Jørn Simonsen <keld@xxxxxxxx>
• Re: Corrupted RAID 50 (aparently?) array. Help needed.
  • From: Bill Davidsen <davidsen@xxxxxxx>
• Re: Understanding bonnie++ results
  • From: Franck Routier <franck.routier@xxxxxxxxx>
• Re: 2x6 or 3x4 raid10 arrays ?
  • From: Bill Davidsen <davidsen@xxxxxxx>
• Re: 2x6 or 3x4 raid10 arrays ?
  • From: Bill Davidsen <davidsen@xxxxxxx>
• Re: very poor ext3 write performance on big filesystems?
  • From: Bill Davidsen <davidsen@xxxxxxx>
• Re: Understanding bonnie++ results
  • From: Bill Davidsen <davidsen@xxxxxxx>
• Re: Article aimed at general audience
  • From: Bill Davidsen <davidsen@xxxxxxx>
• Re: Understanding bonnie++ results
  • From: Keld Jørn Simonsen <keld@xxxxxxxx>
• Re: Severe slowdown with LVM on RAID, alignment problem?
  • From: Michael Guntsche <mike@xxxxxxxxxxxx>
• Re: Severe slowdown with LVM on RAID, alignment problem?
  • From: Peter Rabbitson <rabbit+list@xxxxxxxxx>
• Re: Understanding bonnie++ results
  • From: Franck Routier <franck.routier@xxxxxxxxx>
• Re: Understanding bonnie++ results
  • From: Franck Routier <franck.routier@xxxxxxxxx>
• Re: Understanding bonnie++ results
  • From: Franck Routier <franck.routier@xxxxxxxxx>
• Re: Understanding bonnie++ results
  • From: Franck Routier <franck.routier@xxxxxxxxx>
• Re: Severe slowdown with LVM on RAID, alignment problem?
  • From: Michael Guntsche <mike@xxxxxxxxxxxx>
• Re: Severe slowdown with LVM on RAID, alignment problem?
  • From: Michael Guntsche <mike@xxxxxxxxxxxx>
• Severe slowdown with LVM on RAID, alignment problem?
  • From: Michael Guntsche <mike@xxxxxxxxxxxx>
• Re: 2x6 or 3x4 raid10 arrays ?
  • From: Nat Makarevitch <nat@xxxxxxxxxxxxxxx>
• Re: 2x6 or 3x4 raid10 arrays ?
  • From: Brendan Conoboy <blc@xxxxxxxxxx>
• Re: 2x6 or 3x4 raid10 arrays ?
  • From: Janek Kozicki <janek_listy@xxxxx>
• Re: Corrupted RAID 50 (aparently?) array. Help needed.
  • From: Janek Kozicki <janek_listy@xxxxx>
• Corrupted RAID 50 (aparently?) array. Help needed.
  • From: nmella@xxxxxxxxx
• Re: how to use mkfs.ext3 "stride=" on LVM on RAID correctly?
  • From: Michal Soltys <soltys@xxxxxxxx>
• Re: Understanding bonnie++ results
  • From: Keld Jørn Simonsen <keld@xxxxxxxx>
• Corrupted RAID 50 (aparently?) array. Help needed.
  • From: nmella@xxxxxxxxx
• Re: 2x6 or 3x4 raid10 arrays ?
  • From: Janek Kozicki <janek_listy@xxxxx>
• Re: 2x6 or 3x4 raid10 arrays ?
  • From: Brendan Conoboy <blc@xxxxxxxxxx>
• Corrupted RAID 50 (aparently?) array. Help needed.
  • From: mella.nicolas@xxxxxxxxx
• Corrupted RAID 50 (aparently) array. Help needed.
  • From: "Nicolas Mella" <nmella@xxxxxxxxx>
• Corrupted RAID 50 (aparently?) array. Help needed.
  • From: "Nicolas Mella" <nmella@xxxxxxxxx>
• Re: how to use mkfs.ext3 "stride=" on LVM on RAID correctly?
  • From: "Jon Nelson" <jnelson-linux-raid@xxxxxxxxxxx>
• Re: 2x6 or 3x4 raid10 arrays ?
  • From: Tim Southerwood <ts@xxxxxxxxxx>
• 2x6 or 3x4 raid10 arrays ?
  • From: Franck Routier <franck.routier@xxxxxxxxx>
• Understanding bonnie++ results
  • From: Franck Routier <franck.routier@xxxxxxxxx>
• how to use mkfs.ext3 "stride=" on LVM on RAID correctly?
  • From: Tomasz Chmielewski <mangoo@xxxxxxxx>
• [PATCH] The md RAID10 resync thread could cause a md RAID10 array deadlock
  • From: "K.Tanaka" <k-tanaka@xxxxxxxxxxxxx>
• Re: very poor ext3 write performance on big filesystems?
  • From: Tomasz Chmielewski <mangoo@xxxxxxxx>
• Re: very poor ext3 write performance on big filesystems?
  • From: Andreas Dilger <adilger@xxxxxxx>
• Re: Is 'fd' partition type of any use ?
  • From: Robin Hill <robin@xxxxxxxxxxxxxxx>
• Re: md3: unsupported reshape (reduce disks) required - aborting
  • From: Bernd Schubert <bs@xxxxxxxxx>
• Is 'fd' partition type of any use ?
  • From: Franck Routier <franck.routier@xxxxxxxxx>
• Re: Article aimed at general audience
  • From: Keld Jørn Simonsen <keld@xxxxxxxx>
• Article aimed at general audience
  • From: Bruce Miller <subscribe@xxxxxxxxxxx>
• Re: suns raid-z / zfs
  • From: Bill Davidsen <davidsen@xxxxxxx>
• md3: unsupported reshape (reduce disks) required - aborting
  • From: Bernd Schubert <bs@xxxxxxxxx>
• internal bitmap size
  • From: Hubert Verstraete <hubskml@xxxxxxx>
• Re: mdadm 2.6 creates slow RAID 5 while mdadm 2.5.6 rocks
  • From: Hubert Verstraete <hubskml@xxxxxxx>
• Re: raid1 error handling and faulty drives
  • From: Philip Molter <philip@xxxxxxxxxxxxxxx>
• Re: board/controller recommendations?
  • From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
• Re: board/controller recommendations?
  • From: Dexter Filmore <Dexter.Filmore@xxxxxx>
• Re: board/controller recommendations?
  • From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
• Re: RAID5 to RAID6 reshape?
  • From: Nagilum <nagilum@xxxxxxxxxxx>
• Kernel panic on RAID1 root after upgrade
  • From: Richard Ray <rray@xxxxxxxxxxxxxxxx>
• Re: board/controller recommendations?
  • From: Dexter Filmore <Dexter.Filmore@xxxxxx>
• Re: board/controller recommendations?
  • From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
• board/controller recommendations?
  • From: Dexter Filmore <Dexter.Filmore@xxxxxx>
• Re: mismatch_cnt != 0
  • From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
• Re: Further clarification of the sync_action check behavior.
  • From: Richard Scobie <richard@xxxxxxxxxxx>
• Re: RAID5 to RAID6 reshape?
  • From: pg_lxra@xxxxxxxxxxxxxxxxxxx (Peter Grandi)
• Re: mismatch_cnt != 0
  • From: Janek Kozicki <janek_listy@xxxxx>
• Re: mismatch_cnt != 0
  • From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
• Re: RAID10 far (f2) read throughput on random and sequential / read-ahead
  • From: Keld Jørn Simonsen <keld@xxxxxxxx>
• Re: mismatch_cnt != 0
  • From: carlos@xxxxxxxxxxxxxx (Carlos Carvalho)
• Re: RAID10 far (f2) read throughput on random and sequential / read-ahead
  • From: Nat Makarevitch <nat@xxxxxxxxxxxxxxx>
• Re: RAID5 to RAID6 reshape?
  • From: Nagilum <nagilum@xxxxxxxxxxx>
• Re: mismatch_cnt != 0
  • From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
• Re: mismatch_cnt != 0
  • From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
• Re: mismatch_cnt != 0
  • From: Michael Tokarev <mjt@xxxxxxxxxx>
• mismatch_cnt != 0
  • From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
• Odd performance observation for RAID0
  • From: "Joe Landman" <joe.landman@xxxxxxxxx>
• Increased Reliability by using Raid
  • From: Pete/Piet Delaney <pete@xxxxxxxxxxxx>
• Further clarification of the sync_action check behavior.
  • From: "Harrell, Thomas" <tharrell@xxxxxxxxxxxxxx>
• MD sysfs/kobject issues in SAN environment.
  • From: greg@xxxxxxxxxxxx
• Re: LVM performance
  • From: Oliver Martin <oliver.martin@xxxxxxxxxxxxxxxxxxxx>
• Re: RAID5 to RAID6 reshape?
  • From: pg_lxra@xxxxxxxxxxxxxxxxxxxx (Peter Grandi)
• RAID10 far (f2) read throughput on random and sequential / read-ahead
  • From: Nat Makarevitch <nat@xxxxxxxxxxxxxxx>
• Re: How many drives are bad?
  • From: Peter Rabbitson <rabbit+list@xxxxxxxxx>
• Re: How many drives are bad?
  • From: <pg_mh@xxxxxxxxxx>
• Re: How many drives are bad?
  • From: Norman Elton <normelton@xxxxxxxxx>
• Re: LVM performance (was: Re: RAID5 to RAID6 reshape?)
  • From: pg_lxra@xxxxxxxxxxxxxxxxxxx (Peter Grandi)
• Re: How many drives are bad?
  • From: pg_lxra@xxxxxxxxxxxxxxxxxxx (Peter Grandi)
• Re: suns raid-z / zfs
  • From: "Mario 'BitKoenig' Holbe" <Mario.Holbe@xxxxxxxxxxxxx>
• Re: How many drives are bad?
  • From: Neil Brown <neilb@xxxxxxx>
• Re: RAID5 to RAID6 reshape?
  • From: Alexander Kühn <alexander.kuehn@xxxxxxxxxx>
• Re: Linux Software RAID 5 + XFS Multi-Benchmarks / 10 Raptors Again
  • From: pg_xfs2@xxxxxxxxxxxxxxx (Peter Grandi)
• RE: How many drives are bad?
  • From: "Guy Watkins" <linux-raid@xxxxxxxxxxxxxxxx>
• RE: How many drives are bad?
  • From: "Guy Watkins" <guy@xxxxxxxxxxxxxxxx>
• Re: LVM performance
  • From: Peter Rabbitson <rabbit+list@xxxxxxxxx>
• Re: LVM performance (was: Re: RAID5 to RAID6 reshape?)
  • From: Iustin Pop <iusty@xxxxxxxxx>
• Re: LVM performance (was: Re: RAID5 to RAID6 reshape?)
  • From: "Jon Nelson" <jnelson-linux-raid@xxxxxxxxxxx>
• LVM performance (was: Re: RAID5 to RAID6 reshape?)
  • From: Oliver Martin <oliver.martin@xxxxxxxxxxxxxxxxxxxx>
• RE: How many drives are bad?
  • From: "Steve Fairbairn" <steve@xxxxxxxxxxxxxxxxxxxx>
• Re: How many drives are bad?
  • From: "Norman Elton" <normelton@xxxxxxxxx>
• Re: How many drives are bad?
  • From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
• Re: How many drives are bad?
  • From: "Norman Elton" <normelton@xxxxxxxxx>
• Re: How many drives are bad?
  • From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
• Re: How many drives are bad?
  • From: Norman Elton <normelton@xxxxxxxxx>
• Re: How many drives are bad?
  • From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
• How many drives are bad?
  • From: "Norman Elton" <normelton@xxxxxxxxx>
• Re: RAID5 to RAID6 reshape?
  • From: pg_lxra@xxxxxxxxxxxxxxxxxx (Peter Grandi)
• Re: suns raid-z / zfs
  • From: Keld Jørn Simonsen <keld@xxxxxxxx>
• Re: HDD errors in dmesg, but don't know why...
  • From: Jeff Garzik <jeff@xxxxxxxxxx>
• Re: HDD errors in dmesg, but don't know why...
  • From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
• HDD errors in dmesg, but don't know why...
  • From: "Steve Fairbairn" <steve@xxxxxxxxxxxxxxxxxxxx>
• Re: RAID5 to RAID6 reshape?
  • From: Mark Hahn <hahn@xxxxxxxxxxx>
• Re: RAID5 to RAID6 reshape?
  • From: Janek Kozicki <janek_listy@xxxxx>
• Re: RAID5 to RAID6 reshape?
  • From: Andre Noll <maan@xxxxxxxxxxxxxxx>
• Re: RAID5 to RAID6 reshape?
  • From: Beolach <beolach@xxxxxxxxx>
• Re: suns raid-z / zfs
  • From: Neil Brown <neilb@xxxxxxx>
• Re: suns raid-z / zfs
  • From: Keld Jørn Simonsen <keld@xxxxxxxx>
• Re: RAID5 to RAID6 reshape?
  • From: Janek Kozicki <janek_listy@xxxxx>
• Re: RAID5 to RAID6 reshape?
  • From: "Conway S. Smith" <beolach@xxxxxxxxx>
• Re: Create Raid6 with 1 missing member fails
  • From: Neil Brown <neilb@xxxxxxx>
• Re: suns raid-z / zfs
  • From: Neil Brown <neilb@xxxxxxx>
• Re: RAID5 to RAID6 reshape?
  • From: Neil Brown <neilb@xxxxxxx>
• Re: RAID5 to RAID6 reshape?
  • From: Neil Brown <neilb@xxxxxxx>
• Re: RAID5 to RAID6 reshape?
  • From: cat@xxxxxxxxxx
• Re: RAID5 to RAID6 reshape?
  • From: Janek Kozicki <janek_listy@xxxxx>
• Re: RAID5 to RAID6 reshape?
  • From: Mark Hahn <hahn@xxxxxxxxxxx>
• Re: RAID5 to RAID6 reshape?
  • From: "Conway S. Smith" <beolach@xxxxxxxxx>
• suns raid-z / zfs
  • From: Keld Jørn Simonsen <keld@xxxxxxxx>
• Re: RAID5 to RAID6 reshape?
  • From: Janek Kozicki <janek_listy@xxxxx>
• Create Raid6 with 1 missing member fails
  • From: Sevrin Robstad <quackyo@xxxxxxxx>
• Re: RAID5 to RAID6 reshape?
  • From: Janek Kozicki <janek_listy@xxxxx>
• Re: RAID5 to RAID6 reshape?
  • From: pg_lxra@xxxxxxxxxxxxxxxxxx (Peter Grandi)
• RAID5 to RAID6 reshape?
  • From: Beolach <beolach@xxxxxxxxx>
• Re: [BUG] OOPS 2.6.24.2 raid5 write with ioatdma
  • From: "Shannon Nelson" <shannon.lee.nelson@xxxxxxxxx>
• Re: [BUG] OOPS 2.6.24.2 raid5 write with ioatdma
  • From: "Dan Williams" <dan.j.williams@xxxxxxxxx>
• [BUG] OOPS 2.6.24.2 raid5 write with ioatdma
  • From: Laurent CORBES <laurent.corbes@xxxxxxxxxxxx>
• Re: 2.6.24-rc6 reproducible raid5 hang
  • From: Burkhard Carstens <suse-ml@xxxxxxxxxxxxx>
• Re: transferring RAID-1 drives via sneakernet
  • From: "Jeff Breidenbach" <jeff@xxxxxxx>
• Re: transferring RAID-1 drives via sneakernet
  • From: David Greaves <david@xxxxxxxxxxxx>
• Re: transferring RAID-1 drives via sneakernet
  • From: Michael Tokarev <mjt@xxxxxxxxxx>
• Re: Got raid10 assembled wrong - how to fix?
  • From: Michael Tokarev <mjt@xxxxxxxxxx>
• [BUGREPORT] The kernel thread for md RAID10 could cause a md RAID10 array deadlock
  • From: "K.Tanaka" <k-tanaka@xxxxxxxxxxxxx>
• Re: transferring RAID-1 drives via sneakernet
  • From: "Jeff Breidenbach" <jeff@xxxxxxx>
• Re: transferring RAID-1 drives via sneakernet
  • From: Brendan Conoboy <blc@xxxxxxxxxx>
• Re: transferring RAID-1 drives via sneakernet
  • From: "Jeff Breidenbach" <jeff@xxxxxxx>
• Got raid10 assembled wrong - how to fix?
  • From: "George Spelvin" <linux@xxxxxxxxxxx>
• patch for raid10,f>1 to operate like raid0
  • From: Keld Jørn Simonsen <keld@xxxxxxxx>
• Re: transferring RAID-1 drives via sneakernet
  • From: David Greaves <david@xxxxxxxxxxxx>
• transferring RAID-1 drives via sneakernet
  • From: "Jeff Breidenbach" <jeff@xxxxxxx>
• Re: [PATCH] Use new sb type
  • From: Bill Davidsen <davidsen@xxxxxxx>
• my io testing scripts
  • From: Keld Jørn Simonsen <keld@xxxxxxxx>
• howto on performance
  • From: Keld Jørn Simonsen <keld@xxxxxxxx>
• Re: 3ware and erroneous multipathing - duplicate serial numbers (was: 3ware and dmraid)
  • From: Heinz Mauelshagen <mauelshagen@xxxxxxxxxx>
• Re: mdadm 2.6 creates slow RAID 5 while mdadm 2.5.6 rocks
  • From: Hubert Verstraete <hubskml@xxxxxxx>
• Re: [PATCH] Use new sb type
  • From: David Greaves <david@xxxxxxxxxxxx>
• Re: [PATCH] Use new sb type
  • From: Bill Davidsen <davidsen@xxxxxxx>
• Re: howto and faq
  • From: Keld Jørn Simonsen <keld@xxxxxxxx>
• Re: howto and faq
  • From: David Greaves <david@xxxxxxxxxxxx>
• Re: [PATCH] Use new sb type
  • From: Jan Engelhardt <jengelh@xxxxxxxxxxxxxxx>
• Re: [PATCH] Use new sb type
  • From: David Greaves <david@xxxxxxxxxxxx>
• Re: [PATCH] Use new sb type
  • From: Jan Engelhardt <jengelh@xxxxxxxxxxxxxxx>
• Re: howto and faq
  • From: Keld Jørn Simonsen <keld@xxxxxxxx>
• Re: when is a disk "non-fresh"?
  • From: David Greaves <david@xxxxxxxxxxxx>
• Re: [PATCH] Use new sb type
  • From: David Greaves <david@xxxxxxxxxxxx>
• Re: howto and faq
  • From: David Greaves <david@xxxxxxxxxxxx>
• Re: RAID5 how chage chunck size from 64 to 128, 256 ? is it possible ?
  • From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
• Re: RAID5 how chage chunck size from 64 to 128, 256 ? is it possible ?
  • From: Janek Kozicki <janek_listy@xxxxx>
• Re: RAID5 how chage chunck size from 64 to 128, 256 ? is it possible ?
  • From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
• kernel BUG at drivers/md/md.c:5145!
  • From: "Janos Haar" <djani22@xxxxxxxxxxxx>
• RAID5 how chage chunck size from 64 to 128, 256 ? is it possible ?
  • From: Andreas-Sokov <andre.s@xxxxxxxxx>
• Re[4]: mdadm 2.6.4 : How i can check out current status of reshaping ?
  • From: Andreas-Sokov <andre.s@xxxxxxxxx>
• Re: Any inexpensive hardware recommendations for PCI interface cards?
  • From: "Jeff Breidenbach" <jeff@xxxxxxx>
• ICH10 support
  • From: Mike Myers <mikesm559@xxxxxxxxx>
• Re: Any inexpensive hardware recommendations for PCI interface cards?
  • From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
• Re: Any inexpensive hardware recommendations for PCI interface cards?
  • From: Iustin Pop <iusty@xxxxxxxxx>
• Re: Any inexpensive hardware recommendations for PCI interface cards?
  • From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
• Re: Any inexpensive hardware recommendations for PCI interface cards?
  • From: Iustin Pop <iusty@xxxxxxxxx>
• Re: mdadm 2.6 creates slow RAID 5 while mdadm 2.5.6 rocks
  • From: michael@xxxxxxxxx
• mdadm 2.6 creates slow RAID 5 while mdadm 2.5.6 rocks
  • From: Hubert Verstraete <hubskml@xxxxxxx>
• Re: Any inexpensive hardware recommendations for PCI interface cards?
  • From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
• Re: Any inexpensive hardware recommendations for PCI interface cards?
  • From: Bill Davidsen <davidsen@xxxxxxx>
• Re: Deleting mdadm RAID arrays
  • From: Marcin Krol <admin@xxxxxxxxx>
• Re: Deleting mdadm RAID arrays
  • From: Bill Davidsen <davidsen@xxxxxxx>
• Re: Any inexpensive hardware recommendations for PCI interface cards?
  • From: Tim Southerwood <ts@xxxxxxxxxx>
• Any inexpensive hardware recommendations for PCI interface cards?
  • From: "Steve Fairbairn" <steve@xxxxxxxxxxxxxxxxxxxx>
• Re: raid5: two writing algorithms
  • From: Keld Jørn Simonsen <keld@xxxxxxxx>
• Re: Deleting mdadm RAID arrays
  • From: Marcin Krol <admin@xxxxxxxxx>
• Re: when is a disk "non-fresh"?
  • From: Dexter Filmore <Dexter.Filmore@xxxxxx>
• Re: raid5: two writing algorithms
  • From: Neil Brown <neilb@xxxxxxx>
• Re: raid5: two writing algorithms
  • From: Keld Jørn Simonsen <keld@xxxxxxxx>
• Re: [PATCH] Use new sb type
  • From: Jan Engelhardt <jengelh@xxxxxxxxxxxxxxx>
• Re: when is a disk "non-fresh"?
  • From: Neil Brown <neilb@xxxxxxx>
• Re: when is a disk "non-fresh"?
  • From: Dexter Filmore <Dexter.Filmore@xxxxxx>
• Re: using update-initramfs: how to get new mdadm.conf into the /boot? Or is it XFS?
  • From: Bill Davidsen <davidsen@xxxxxxx>
• Re: Deleting mdadm RAID arrays
  • From: Bill Davidsen <davidsen@xxxxxxx>
• Re: using update-initramfs: how to get new mdadm.conf into the /boot? Or is it XFS?
  • From: Bill Davidsen <davidsen@xxxxxxx>
• Re: mdadm 2.6.4 : How i can check out current status of reshaping ?
  • From: Bill Davidsen <davidsen@xxxxxxx>
• Re: raid5: two writing algorithms
  • From: Neil Brown <neilb@xxxxxxx>
• howto and faq
  • From: Keld Jørn Simonsen <keld@xxxxxxxx>
• raid5: two writing algorithms
  • From: Keld Jørn Simonsen <keld@xxxxxxxx>
• [PATCH] Dynamic RAID Stripe Cache Size
  • From: Yuri Tikhonov <yur@xxxxxxxxxxx>
• Re: recommendations for stripe/chunk size
  • From: Keld Jørn Simonsen <keld@xxxxxxxx>
• Re: Deleting mdadm RAID arrays
  • From: Marcin Krol <admin@xxxxxxxxx>
• Re: draft howto on making raids for surviving a disk crash
  • From: Keld Jørn Simonsen <keld@xxxxxxxx>
• Re: recommendations for stripe/chunk size
  • From: Wolfgang Denk <wd@xxxxxxx>
• Re: draft howto on making raids for surviving a disk crash
  • From: Luca Berra <bluca@xxxxxxxxxx>
• Re: recommendations for stripe/chunk size
  • From: Neil Brown <neilb@xxxxxxx>
• Re: recommendations for stripe/chunk size
  • From: Neil Brown <neilb@xxxxxxx>
• Re: recommendations for stripe/chunk size
  • From: Neil Brown <neilb@xxxxxxx>
• Re: recommendations for stripe/chunk size
  • From: Iustin Pop <iusty@xxxxxxxxx>
• Re: Deleting mdadm RAID arrays
  • From: Neil Brown <neilb@xxxxxxx>
• Re: raid10 on three discs - few questions.
  • From: Neil Brown <neilb@xxxxxxx>
• Re: recommendations for stripe/chunk size
  • From: Keld Jørn Simonsen <keld@xxxxxxxx>
• Re: raid1 or raid10 for /boot
  • From: Keld Jørn Simonsen <keld@xxxxxxxx>
• Re: mdadm 2.6.4 : How i can check out current status of reshaping ?
  • From: Janek Kozicki <janek_listy@xxxxx>
• Re: which raid level gives maximum overall speed? (raid-10,f2 vs. raid-0)
  • From: Janek Kozicki <janek_listy@xxxxx>
• Re: recommendations for stripe/chunk size
  • From: Bill Davidsen <davidsen@xxxxxxx>
• Re: raid10 on three discs - few questions.
  • From: Bill Davidsen <davidsen@xxxxxxx>
• Re: recommendations for stripe/chunk size
  • From: Wolfgang Denk <wd@xxxxxxx>
• Re[4]: mdadm 2.6.4 : How i can check out current status of reshaping ?
  • From: Andreas-Sokov <andre.s@xxxxxxxxx>
• Re: recommendations for stripe/chunk size
  • From: Bill Davidsen <davidsen@xxxxxxx>
• Re: Deleting mdadm RAID arrays
  • From: Bill Davidsen <davidsen@xxxxxxx>
• Re: raid10 on three discs - few questions.
  • From: "Jon Nelson" <jnelson-linux-raid@xxxxxxxxxxx>
• Re: raid1 or raid10 for /boot
  • From: Bill Davidsen <davidsen@xxxxxxx>
• Re: raid10 on three discs - few questions.
  • From: Bill Davidsen <davidsen@xxxxxxx>
• RE: Disk failure during grow, what is the current state.
  • From: "Steve Fairbairn" <steve@xxxxxxxxxxxxxxxxxxxx>
• Re: draft howto on making raids for surviving a disk crash
  • From: Keld Jørn Simonsen <keld@xxxxxxxx>
• Re: Purpose of Document? (was Re: draft howto on making raids for surviving a disk crash)
  • From: Keld Jørn Simonsen <keld@xxxxxxxx>
• FW: Disk failure during grow, what is the current state.
  • From: "Steve Fairbairn" <steve@xxxxxxxxxxxxxxxxxxxx>
• Re: Disk failure during grow, what is the current state.
  • From: Nagilum <nagilum@xxxxxxxxxxx>
• Purpose of Document? (was Re: draft howto on making raids for surviving a disk crash)
  • From: Moshe Yudkowsky <moshe@xxxxxxxxx>
• Re: draft howto on making raids for surviving a disk crash
  • From: Michal Soltys <soltys@xxxxxxxx>
• Disk failure during grow, what is the current state.
  • From: "Steve Fairbairn" <steve@xxxxxxxxxxxxxxxxxxxx>
• Re: Deleting mdadm RAID arrays
  • From: Marcin Krol <admin@xxxxxxxxx>
• Re: Deleting mdadm RAID arrays
  • From: Marcin Krol <admin@xxxxxxxxx>
• Re: Deleting mdadm RAID arrays
  • From: David Greaves <david@xxxxxxxxxxxx>
• Re: Deleting mdadm RAID arrays
  • From: Neil Brown <neilb@xxxxxxx>
• Re: Deleting mdadm RAID arrays
  • From: Marcin Krol <admin@xxxxxxxxx>
• Re: Deleting mdadm RAID arrays
  • From: Peter Rabbitson <rabbit+list@xxxxxxxxx>
• Re: Deleting mdadm RAID arrays
  • From: Marcin Krol <admin@xxxxxxxxx>
• Re: Deleting mdadm RAID arrays
  • From: Marcin Krol <admin@xxxxxxxxx>
• Re: draft howto on making raids for surviving a disk crash
  • From: Luca Berra <bluca@xxxxxxxxxx>
• Re: RAID needs more to survive a power hit, different /boot layout for example (was Re: draft howto on making raids for surviving a disk crash)
  • From: Luca Berra <bluca@xxxxxxxxxx>
• Re: which raid level gives maximum overall speed? (raid-10,f2 vs. raid-0)
  • From: Peter Rabbitson <rabbit+list@xxxxxxxxx>
• Re: RAID needs more to survive a power hit, different /boot layout for example (was Re: draft howto on making raids for surviving a disk crash)
  • From: Michael Tokarev <mjt@xxxxxxxxxx>
• Re: RAID needs more to survive a power hit, different /boot layout for example (was Re: draft howto on making raids for surviving a disk crash)
  • From: Linda Walsh <xfs@xxxxxxxxx>
• Re: which raid level gives maximum overall speed? (raid-10,f2 vs. raid-0)
  • From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
• Re: which raid level gives maximum overall speed? (raid-10,f2 vs. raid-0)
  • From: Keld Jørn Simonsen <keld@xxxxxxxx>
• Re: which raid level gives maximum overall speed? (raid-10,f2 vs. raid-0)
  • From: Janek Kozicki <janek_listy@xxxxx>
• Re: which raid level gives maximum overall speed? (raid-10,f2 vs. raid-0)
  • From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
• Re: Deleting mdadm RAID arrays
  • From: Neil Brown <neilb@xxxxxxx>
• Re: which raid level gives maximum overall speed? (raid-10,f2 vs. raid-0)
  • From: Keld Jørn Simonsen <keld@xxxxxxxx>
• Re: recommendations for stripe/chunk size
  • From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
• Re: Auto generation of mdadm.conf
  • From: Janek Kozicki <janek_listy@xxxxx>
• recommendations for stripe/chunk size
  • From: Keld Jørn Simonsen <keld@xxxxxxxx>
• Re: which raid level gives maximum overall speed? (raid-10,f2 vs. raid-0)
  • From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
• Re: which raid level gives maximum overall speed? (raid-10,f2 vs. raid-0)
  • From: Keld Jørn Simonsen <keld@xxxxxxxx>
• Re: draft howto on making raids for surviving a disk crash
  • From: Keld Jørn Simonsen <keld@xxxxxxxx>
• Re: Auto generation of mdadm.conf
  • From: Michael Tokarev <mjt@xxxxxxxxxx>
• Re: Deleting mdadm RAID arrays
  • From: Michael Tokarev <mjt@xxxxxxxxxx>
• Re: Auto generation of mdadm.conf (was: Deleting mdadm RAID arrays)
  • From: Janek Kozicki <janek_listy@xxxxx>
• Re: Deleting mdadm RAID arrays
  • From: Moshe Yudkowsky <moshe@xxxxxxxxx>
• Re: Deleting mdadm RAID arrays
  • From: Michael Tokarev <mjt@xxxxxxxxxx>
• Re: RAID needs more to survive a power hit, different /boot layout for example (was Re: draft howto on making raids for surviving a disk crash)
  • From: Linda Walsh <xfs@xxxxxxxxx>
• Re: Deleting mdadm RAID arrays
  • From: Janek Kozicki <janek_listy@xxxxx>
• Re: Deleting mdadm RAID arrays
  • From: Moshe Yudkowsky <moshe@xxxxxxxxx>
• Deleting mdadm RAID arrays
  • From: Marcin Krol <admin@xxxxxxxxx>
• Re: Re[2]: mdadm 2.6.4 : How i can check out current status of reshaping ?
  • From: Neil Brown <neilb@xxxxxxx>
• Re[2]: mdadm 2.6.4 : How i can check out current status of reshaping ?
  • From: Andreas-Sokov <andre.s@xxxxxxxxx>
• Re: when is a disk "non-fresh"?
  • From: Neil Brown <neilb@xxxxxxx>
• Re: using update-initramfs: how to get new mdadm.conf into the /boot? Or is it XFS?
  • From: Moshe Yudkowsky <moshe@xxxxxxxxx>
• Re: using update-initramfs: how to get new mdadm.conf into the /boot? Or is it XFS?
  • From: Moshe Yudkowsky <moshe@xxxxxxxxx>
• Re: mdadm 2.6.4 : How i can check out current status of reshaping ?
  • From: Neil Brown <neilb@xxxxxxx>
• Re: RAID needs more to survive a power hit, different /boot layout for example (was Re: draft howto on making raids for surviving a disk crash)
  • From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
• Re: using update-initramfs: how to get new mdadm.conf into the /boot? Or is it XFS?
  • From: Robin Hill <robin@xxxxxxxxxxxxxxx>
• when is a disk "non-fresh"?
  • From: Dexter Filmore <Dexter.Filmore@xxxxxx>
• Re: using update-initramfs: how to get new mdadm.conf into the /boot? Or is it XFS?
  • From: Moshe Yudkowsky <moshe@xxxxxxxxx>
• Re: using update-initramfs: how to get new mdadm.conf into the /boot? Or is it XFS?
  • From: maximilian attems <max@xxxxxxx>
• Re: using update-initramfs: how to get new mdadm.conf into the /boot? Or is it XFS?
  • From: Robin Hill <robin@xxxxxxxxxxxxxxx>
• using update-initramfs: how to get new mdadm.conf into the /boot? Or is it XFS?
  • From: Moshe Yudkowsky <moshe@xxxxxxxxx>
• Re: RAID needs more to survive a power hit, different /boot layout for example (was Re: draft howto on making raids for surviving a disk crash)
  • From: Richard Scobie <richard@xxxxxxxxxxx>
• Re: raid1 and raid 10 always writes all data to all disks?
  • From: Bill Davidsen <davidsen@xxxxxxx>
• Re: draft howto on making raids for surviving a disk crash
  • From: Bill Davidsen <davidsen@xxxxxxx>
• Re: In this partition scheme, grub does not find md information?
  • From: Michael Tokarev <mjt@xxxxxxxxxx>
• Re: In this partition scheme, grub does not find md information?
  • From: "John Stoffel" <john@xxxxxxxxxxx>
• Re: RAID needs more to survive a power hit, different /boot layout for example (was Re: draft howto on making raids for surviving a disk crash)
  • From: Michael Tokarev <mjt@xxxxxxxxxx>
• Re: Linux md and iscsi problems
  • From: aristizb@xxxxxxxxxxx
• Re: RAID needs more to survive a power hit, different /boot layout for example (was Re: draft howto on making raids for surviving a disk crash)
  • From: Eric Sandeen <sandeen@xxxxxxxxxxx>
• Re: RAID needs more to survive a power hit, different /boot layout for example (was Re: draft howto on making raids for surviving a disk crash)
  • From: Michael Tokarev <mjt@xxxxxxxxxx>
• Re: RAID needs more to survive a power hit, different /boot layout for example (was Re: draft howto on making raids for surviving a disk crash)
  • From: Moshe Yudkowsky <moshe@xxxxxxxxx>
• Re: RAID needs more to survive a power hit, different /boot layout for example (was Re: draft howto on making raids for surviving a disk crash)
  • From: Eric Sandeen <sandeen@xxxxxxxxxxx>
• Re: RAID needs more to survive a power hit, different /boot layout for example (was Re: draft howto on making raids for surviving a disk crash)
  • From: Eric Sandeen <sandeen@xxxxxxxxxxx>
• Re: RAID needs more to survive a power hit, different /boot layout for example (was Re: draft howto on making raids for surviving a disk crash)
  • From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
• Re: RAID needs more to survive a power hit, different /boot layout for example (was Re: draft howto on making raids for surviving a disk crash)
  • From: Michael Tokarev <mjt@xxxxxxxxxx>
• Re: raid1 or raid10 for /boot
  • From: Robin Hill <robin@xxxxxxxxxxxxxxx>
• Re: RAID needs more to survive a power hit, different /boot layout for example (was Re: draft howto on making raids for surviving a disk crash)
  • From: Robin Hill <robin@xxxxxxxxxxxxxxx>
• Re: raid1 or raid10 for /boot
  • From: Keld Jørn Simonsen <keld@xxxxxxxx>
• Re: RAID needs more to survive a power hit, different /boot layout for example (was Re: draft howto on making raids for surviving a disk crash)
  • From: Moshe Yudkowsky <moshe@xxxxxxxxx>
• Re: RAID needs more to survive a power hit, different /boot layout for example (was Re: draft howto on making raids for surviving a disk crash)
  • From: Moshe Yudkowsky <moshe@xxxxxxxxx>
• Re: RAID needs more to survive a power hit, different /boot layout for example (was Re: draft howto on making raids for surviving a disk crash)
  • From: Michael Tokarev <mjt@xxxxxxxxxx>
• Re: raid1 or raid10 for /boot
  • From: Robin Hill <robin@xxxxxxxxxxxxxxx>
• raid1 or raid10 for /boot
  • From: Keld Jørn Simonsen <keld@xxxxxxxx>
• mdadm 2.6.4 : How i can check out current status of reshaping ?
  • From: Andreas-Sokov <andre.s@xxxxxxxxx>
• Re: Re[2]: problem with spare, acive device, clean degrated, reshaip RADI5, anybody can help ?
  • From: Neil Brown <neilb@xxxxxxx>
• Re[2]: problem with spare, acive device, clean degrated, reshaip RADI5, anybody can help ?
  • From: Andreas-Sokov <andre.s@xxxxxxxxx>
• Re[2]: problem with spare, acive device, clean degrated, reshaip RADI5, anybody can help ?
  • From: Andreas-Sokov <andre.s@xxxxxxxxx>
• Re: problem with spare, acive device, clean degrated, reshaip RADI5, anybody can help ?
  • From: Neil Brown <neilb@xxxxxxx>
• Re: /dev/sdb has different metadata to chosen array /dev/md1 0.91 0.90.
  • From: Neil Brown <neilb@xxxxxxx>
• Re: raid10 on three discs - few questions.
  • From: "Jon Nelson" <jnelson-linux-raid@xxxxxxxxxxx>
• Re: raid10 on three discs - few questions.
  • From: "Jon Nelson" <jnelson@xxxxxxxxxxx>
• Re: raid10 on three discs - few questions.
  • From: Janek Kozicki <janek_listy@xxxxx>
• Re: raid10 on three discs - few questions.
  • From: Neil Brown <neilb@xxxxxxx>
• raid10 on three discs - few questions.
  • From: Janek Kozicki <janek_listy@xxxxx>
• Re: RAID needs more to survive a power hit, different /boot layout for example (was Re: draft howto on making raids for surviving a disk crash)
  • From: Robin Hill <robin@xxxxxxxxxxxxxxx>
• Re: RAID needs more to survive a power hit, different /boot layout for example (was Re: draft howto on making raids for surviving a disk crash)
  • From: Michael Tokarev <mjt@xxxxxxxxxx>
• Re: RAID needs more to survive a power hit, different /boot layout for example (was Re: draft howto on making raids for surviving a disk crash)
  • From: Moshe Yudkowsky <moshe@xxxxxxxxx>
• Re: RAID needs more to survive a power hit, different /boot layout for example (was Re: draft howto on making raids for surviving a disk crash)
  • From: Moshe Yudkowsky <moshe@xxxxxxxxx>
• Re: RAID needs more to survive a power hit, different /boot layout for example (was Re: draft howto on making raids for surviving a disk crash)
  • From: Michael Tokarev <mjt@xxxxxxxxxx>
• Re: RAID needs more to survive a power hit, different /boot layout for example (was Re: draft howto on making raids for surviving a disk crash)
  • From: Robin Hill <robin@xxxxxxxxxxxxxxx>
• RAID needs more to survive a power hit, different /boot layout for example (was Re: draft howto on making raids for surviving a disk crash)
  • From: Moshe Yudkowsky <moshe@xxxxxxxxx>
• Re: RAID 1 and grub
  • From: Richard Scobie <richard@xxxxxxxxxxx>
• Re: raid1 and raid 10 always writes all data to all disks?
  • From: Keld Jørn Simonsen <keld@xxxxxxxx>
• Re: draft howto on making raids for surviving a disk crash
  • From: Keld Jørn Simonsen <keld@xxxxxxxx>
• Re: RAID 1 and grub
  • From: Peter Rabbitson <rabbit+list@xxxxxxxxx>
• Re: raid1 and raid 10 always writes all data to all disks?
  • From: Bill Davidsen <davidsen@xxxxxxx>
• Re: draft howto on making raids for surviving a disk crash
  • From: Bill Davidsen <davidsen@xxxxxxx>
• Re: RAID 1 and grub
  • From: Bill Davidsen <davidsen@xxxxxxx>
• Re: raid problem: after every reboot /dev/sdb1 is removed?
  • From: Bill Davidsen <davidsen@xxxxxxx>
• Re: assemble vs create an array.......
  • From: Dragos <dragos@xxxxxxxxxxx>
• Re: RAID 1 and grub
  • From: Richard Scobie <richard@xxxxxxxxxxx>
• non-fresh: what?
  • From: Dexter Filmore <Dexter.Filmore@xxxxxx>
• raid1 and raid 10 always writes all data to all disks?
  • From: Keld Jørn Simonsen <keld@xxxxxxxx>
• Re: RAID 1 and grub
  • From: Keld Jørn Simonsen <keld@xxxxxxxx>
• Assemble Same RAID0 More than Once?
  • From: AndrewL733 <AndrewL733@xxxxxxx>
• Re: Linux md and iscsi problems
  • From: Neil Brown <neilb@xxxxxxx>
• Re: draft howto on making raids for surviving a disk crash
  • From: Keld Jørn Simonsen <keld@xxxxxxxx>
• Re: draft howto on making raids for surviving a disk crash
  • From: Janek Kozicki <janek_listy@xxxxx>
• Re: In this partition scheme, grub does not find md information?
  • From: Bill Davidsen <davidsen@xxxxxxx>
• draft howto on making raids for surviving a disk crash
  • From: Keld Jørn Simonsen <keld@xxxxxxxx>
• Re: raid problem: after every reboot /dev/sdb1 is removed?
  • From: Bill Davidsen <davidsen@xxxxxxx>
• /dev/sdb has different metadata to chosen array /dev/md1 0.91 0.90.
  • From: Andreas-Sokov <andre.s@xxxxxxxxx>
• mdadm: /dev/md1: Cannot reshape array without increasing size (yet).
  • From: Andreas-Sokov <andre.s@xxxxxxxxx>
• Re: raid problem: after every reboot /dev/sdb1 is removed?
  • From: Neil Brown <neilb@xxxxxxx>
• Linux md and iscsi problems
  • From: aristizb@xxxxxxxxxxx
• Re: raid problem: after every reboot /dev/sdb1 is removed?
  • From: Berni <wstripes@xxxxxx>
• Re: raid problem: after every reboot /dev/sdb1 is removed?
  • From: "Greg Cormier" <gcormier@xxxxxxxxx>
• raid problem: after every reboot /dev/sdb1 is removed?
  • From: Berni <wstripes@xxxxxx>
• Re: RAID 1 and grub
  • From: David Greaves <david@xxxxxxxxxxxx>
• Re: which raid level gives maximum overall speed? (raid-10,f2 vs. raid-0)
  • From: Bill Davidsen <davidsen@xxxxxxx>
• Re: In this partition scheme, grub does not find md information?
  • From: Bill Davidsen <davidsen@xxxxxxx>
• Re: In this partition scheme, grub does not find md information?
  • From: Bill Davidsen <davidsen@xxxxxxx>
• Re: which raid level gives maximum overall speed? (raid-10,f2 vs. raid-0)
  • From: Janek Kozicki <janek_listy@xxxxx>
• Re: RAID 1 and grub
  • From: Richard Scobie <richard@xxxxxxxxxxx>
• Re: RAID 1 and grub
  • From: "David Rees" <drees76@xxxxxxxxx>
• Re: RAID 1 and grub
  • From: Richard Scobie <richard@xxxxxxxxxxx>
• Re: which raid level gives maximum overall speed? (raid-10,f2 vs. raid-0)
  • From: Keld Jørn Simonsen <keld@xxxxxxxx>
• Re: RAID 1 and grub
  • From: Richard Scobie <richard@xxxxxxxxxxx>
• Re: Documentation? failure to update-initramfs causes Infinite md loop on boot
  • From: Moshe Yudkowsky <moshe@xxxxxxxxx>
• Re: RAID 1 and grub
  • From: "David Rees" <drees76@xxxxxxxxx>
• problem with spare, acive device, clean degrated, reshaip RADI5, anybody can help ?
  • From: Andreas-Sokov <andre.s@xxxxxxxxx>
• Re: Documentation? failure to update-initramfs causes Infinite md loop on boot
  • From: maximilian attems <max@xxxxxxx>
• Re: which raid level gives maximum overall speed? (raid-10,f2 vs. raid-0)
  • From: Janek Kozicki <janek_listy@xxxxx>
• Documentation? failure to update-initramfs causes Infinite md loop on boot
  • From: Moshe Yudkowsky <moshe@xxxxxxxxx>
• Re: In this partition scheme, grub does not find md information?
  • From: Bill Davidsen <davidsen@xxxxxxx>
• Re: In this partition scheme, grub does not find md information?
  • From: Bill Davidsen <davidsen@xxxxxxx>
• Re: which raid level gives maximum overall speed? (raid-10,f2 vs. raid-0)
  • From: Keld Jørn Simonsen <keld@xxxxxxxx>
• RAID 1 and grub
  • From: Richard Scobie <richard@xxxxxxxxxxx>
• which raid level gives maximum overall speed? (raid-10,f2 vs. raid-0)
  • From: Janek Kozicki <janek_listy@xxxxx>
• Re: Loop devices to RAID? (was Re: In this partition scheme, grub does not find md information?)
  • From: Tim Southerwood <ts@xxxxxxxxxx>
• Loop devices to RAID? (was Re: In this partition scheme, grub does not find md information?)
  • From: Moshe Yudkowsky <moshe@xxxxxxxxx>
• Re: In this partition scheme, grub does not find md information?
  • From: Peter Rabbitson <rabbit+list@xxxxxxxxx>
• Re: In this partition scheme, grub does not find md information?
  • From: Keld Jørn Simonsen <keld@xxxxxxxx>
• Re: In this partition scheme, grub does not find md information?
  • From: Peter Rabbitson <rabbit+list@xxxxxxxxx>
• Re: In this partition scheme, grub does not find md information?
  • From: Michael Tokarev <mjt@xxxxxxxxxx>
• Re: In this partition scheme, grub does not find md information?
  • From: Moshe Yudkowsky <moshe@xxxxxxxxx>
• Re: linux raid faq
  • From: Janek Kozicki <janek_listy@xxxxx>
• Re: WRONG INFO (was Re: In this partition scheme, grub does not find md information?)
  • From: Michael Tokarev <mjt@xxxxxxxxxx>
• Re: In this partition scheme, grub does not find md information?
  • From: Michael Tokarev <mjt@xxxxxxxxxx>
• Re: In this partition scheme, grub does not find md information?
  • From: Michael Tokarev <mjt@xxxxxxxxxx>
• Re: [PATCH] Use new sb type
  • From: David Greaves <david@xxxxxxxxxxxx>
• Re: linux raid faq
  • From: David Greaves <david@xxxxxxxxxxxx>
• Re: WRONG INFO (was Re: In this partition scheme, grub does not find md information?)
  • From: David Greaves <david@xxxxxxxxxxxx>
• Re: Help, big error, dd first GB of a raid:-/
  • From: Peter Rabbitson <rabbit+list@xxxxxxxxx>
• Re: Help, big error, dd first GB of a raid:-/
  • From: Lars Schimmer <l.schimmer@xxxxxxxxxxxxx>
• Re: Help, big error, dd first GB of a raid:-/
  • From: Peter Rabbitson <rabbit+list@xxxxxxxxx>
• Re: In this partition scheme, grub does not find md information?
  • From: Peter Rabbitson <rabbit+list@xxxxxxxxx>
• WRONG INFO (was Re: In this partition scheme, grub does not find md information?)
  • From: Peter Rabbitson <rabbit+list@xxxxxxxxx>
• Help, big error, dd first GB of a raid:-/
  • From: Lars Schimmer <l.schimmer@xxxxxxxxxxxxx>
• Re: In this partition scheme, grub does not find md information?
  • From: Moshe Yudkowsky <moshe@xxxxxxxxx>
• Re: In this partition scheme, grub does not find md information?
  • From: David Greaves <david@xxxxxxxxxxxx>
• Re: In this partition scheme, grub does not find md information?
  • From: David Greaves <david@xxxxxxxxxxxx>
• Re: Check mdadm-Raid 5
  • From: Rui Santos <rsantos@xxxxxxxxxxxx>
• Check mdadm-Raid 5
  • From: "Michael Mott" <michael.mott@xxxxxxx>
• Re: [BUG] The kernel thread for md RAID1 could cause a md RAID1 array deadlock
  • From: "K.Tanaka" <k-tanaka@xxxxxxxxxxxxx>
• Re: In this partition scheme, grub does not find md information?
  • From: Moshe Yudkowsky <moshe@xxxxxxxxx>
• Re: In this partition scheme, grub does not find md information?
  • From: Keld Jørn Simonsen <keld@xxxxxxxx>
• Re: In this partition scheme, grub does not find md information?
  • From: Moshe Yudkowsky <moshe@xxxxxxxxx>
• Re: In this partition scheme, grub does not find md information?
  • From: Peter Rabbitson <rabbit+list@xxxxxxxxx>
• Re: In this partition scheme, grub does not find md information?
  • From: Keld Jørn Simonsen <keld@xxxxxxxx>
• Re: In this partition scheme, grub does not find md information?
  • From: Keld Jørn Simonsen <keld@xxxxxxxx>
• Re: In this partition scheme, grub does not find md information?
  • From: Moshe Yudkowsky <moshe@xxxxxxxxx>
• Re: In this partition scheme, grub does not find md information?
  • From: Bill Davidsen <davidsen@xxxxxxx>
• Re: In this partition scheme, grub does not find md information?
  • From: Bill Davidsen <davidsen@xxxxxxx>
• Re: [PATCH] Use new sb type
  • From: Bill Davidsen <davidsen@xxxxxxx>
• Re: 2.6.24-rc6 reproducible raid5 hang
  • From: Bill Davidsen <davidsen@xxxxxxx>
• Re: In this partition scheme, grub does not find md information?
  • From: Moshe Yudkowsky <moshe@xxxxxxxxx>
• Re: In this partition scheme, grub does not find md information?
  • From: Keld Jørn Simonsen <keld@xxxxxxxx>
• Re: linux raid faq
  • From: Janek Kozicki <janek_listy@xxxxx>
• Re: In this partition scheme, grub does not find md information?
  • From: Moshe Yudkowsky <moshe@xxxxxxxxx>
• linux raid faq
  • From: Keld Jørn Simonsen <keld@xxxxxxxx>
• Re: How many disks per SATA-II bus?
  • From: Jeff Garzik <jeff@xxxxxxxxxx>
• How many disks per SATA-II bus?
  • From: Bruce Miller <subscribe@xxxxxxxxxxx>
• Re: In this partition scheme, grub does not find md information?
  • From: Keld Jørn Simonsen <keld@xxxxxxxx>
• Re: In this partition scheme, grub does not find md information?
  • From: Keld Jørn Simonsen <keld@xxxxxxxx>
• Re: In this partition scheme, grub does not find md information?
  • From: Michael Tokarev <mjt@xxxxxxxxxx>
• Re: In this partition scheme, grub does not find md information?
  • From: Michael Tokarev <mjt@xxxxxxxxxx>
• Re: In this partition scheme, grub does not find md information?
  • From: Michael Tokarev <mjt@xxxxxxxxxx>
• Re: In this partition scheme, grub does not find md information?
  • From: Michael Tokarev <mjt@xxxxxxxxxx>
• Re: In this partition scheme, grub does not find md information?
  • From: Keld Jørn Simonsen <keld@xxxxxxxx>
• Re: In this partition scheme, grub does not find md information?
  • From: Peter Rabbitson <rabbit+list@xxxxxxxxx>
• Re: In this partition scheme, grub does not find md information?
  • From: Keld Jørn Simonsen <keld@xxxxxxxx>
• Re: In this partition scheme, grub does not find md information?
  • From: Peter Rabbitson <rabbit+list@xxxxxxxxx>
• Re: In this partition scheme, grub does not find md information?
  • From: Moshe Yudkowsky <moshe@xxxxxxxxx>
• Re: In this partition scheme, grub does not find md information?
  • From: Moshe Yudkowsky <moshe@xxxxxxxxx>
• Re: In this partition scheme, grub does not find md information?
  • From: Moshe Yudkowsky <moshe@xxxxxxxxx>
• Re: In this partition scheme, grub does not find md information?
  • From: Peter Rabbitson <rabbit+list@xxxxxxxxx>
• Re: In this partition scheme, grub does not find md information?
  • From: Michael Tokarev <mjt@xxxxxxxxxx>
• Re: In this partition scheme, grub does not find md information?
  • From: Keld Jørn Simonsen <keld@xxxxxxxx>
• Re: In this partition scheme, grub does not find md information?
  • From: Peter Rabbitson <rabbit+list@xxxxxxxxx>
• Re: 2.6.24-rc6 reproducible raid5 hang
  • From: carlos@xxxxxxxxxxxxxx (Carlos Carvalho)
• Re: In this partition scheme, grub does not find md information?
  • From: Michael Tokarev <mjt@xxxxxxxxxx>
• Re: In this partition scheme, grub does not find md information?
  • From: Michael Tokarev <mjt@xxxxxxxxxx>
• Re: In this partition scheme, grub does not find md information?
  • From: Keld Jørn Simonsen <keld@xxxxxxxx>
• Re: In this partition scheme, grub does not find md information?
  • From: Moshe Yudkowsky <moshe@xxxxxxxxx>
• Yes, but please provide the clue (was Re: [PATCH] Use new sb type)
  • From: Moshe Yudkowsky <moshe@xxxxxxxxx>
• Re: In this partition scheme, grub does not find md information?
  • From: Peter Rabbitson <rabbit+list@xxxxxxxxx>
• Re: In this partition scheme, grub does not find md information?
  • From: Moshe Yudkowsky <moshe@xxxxxxxxx>
• Re: write-intent bitmaps
  • From: Russell Coker <russell@xxxxxxxxxxxx>
• Re: [PATCH] Use new sb type
  • From: Peter Rabbitson <rabbit+list@xxxxxxxxx>
• Re: write-intent bitmaps
  • From: Peter Rabbitson <rabbit+list@xxxxxxxxx>
• Re: write-intent bitmaps
  • From: Russell Coker <russell@xxxxxxxxxxxx>
• Re: In this partition scheme, grub does not find md information?
  • From: Neil Brown <neilb@xxxxxxx>
• In this partition scheme, grub does not find md information?
  • From: Moshe Yudkowsky <moshe@xxxxxxxxx>
• Re: [PATCH] Use new sb type
  • From: Tim Southerwood <ts@xxxxxxxxxx>
• problem with spare, acive device, clean degrated, reshaip RADI5, anybody can help
  • From: Andreas-Sokov <andre.s@xxxxxxxxx>
• Re: BUG: possible array corruption when adding a component to a degraded raid5 (possibly other levels too)
  • From: Neil Brown <neilb@xxxxxxx>
• problem with spare, acive device, clean degrated, reshaip RADI5, anybody can help
  • From: Andreas-Sokov <andre.s@xxxxxxxxx>
• Re: [PATCH] Use new sb type
  • From: David Greaves <david@xxxxxxxxxxxx>
• Re: Unable to eradicate previous version of device information, even with zero-superblock and dd
  • From: Moshe Yudkowsky <moshe@xxxxxxxxx>
• Re: [PATCH] Use new sb type
  • From: Jan Engelhardt <jengelh@xxxxxxxxxxxxxxx>
• Re: striping of a 4 drive raid10
  • From: Keld Jørn Simonsen <keld@xxxxxxxx>
• Re: [PATCH] Use new sb type
  • From: Peter Rabbitson <rabbit+list@xxxxxxxxx>
• Re: [PATCH] Use new sb type
  • From: David Greaves <david@xxxxxxxxxxxx>
• Re: striping of a 4 drive raid10
  • From: Bill Davidsen <davidsen@xxxxxxx>
• Re: 2.6.24-rc6 reproducible raid5 hang
  • From: Tim Southerwood <ts@xxxxxxxxxx>
• [PATCH] Use new sb type
  • From: Jan Engelhardt <jengelh@xxxxxxxxxxxxxxx>
• Unable to eradicate previous version of device information, even with zero-superblock and dd
  • From: Moshe Yudkowsky <moshe@xxxxxxxxx>
• Re: BUG: possible array corruption when adding a component to a degraded raid5 (possibly other levels too)
  • From: Peter Rabbitson <rabbit+list@xxxxxxxxx>
• Re: BUG: possible array corruption when adding a component to a degraded raid5 (possibly other levels too)
  • From: Neil Brown <neilb@xxxxxxx>
• BUG: possible array corruption when adding a component to a degraded raid5 (possibly other levels too)
  • From: Peter Rabbitson <rabbit+list@xxxxxxxxx>
• Re: assemble vs create an array.......
  • From: Dragos <dragos@xxxxxxxxxxx>
• Re: striping of a 4 drive raid10
  • From: Neil Brown <neilb@xxxxxxx>
• Re: striping of a 4 drive raid10
  • From: Keld Jørn Simonsen <keld@xxxxxxxx>
• Re: striping of a 4 drive raid10
  • From: Keld Jørn Simonsen <keld@xxxxxxxx>
• Re: striping of a 4 drive raid10
  • From: Neil Brown <neilb@xxxxxxx>
• Re: striping of a 4 drive raid10
  • From: pg_lxra@xxxxxxxxxxxxxxxxxxx (Peter Grandi)
• 2 failed disks RAID 5 behavior bug?
  • From: "TJ Harrell" <tj@xxxxxxxxxxxxx>
• striping of a 4 drive raid10
  • From: Keld Jørn Simonsen <keld@xxxxxxxx>
• Re: write-intent bitmaps
  • From: Russell Coker <russell@xxxxxxxxxxxx>
• Re: write-intent bitmaps
  • From: Neil Brown <neilb@xxxxxxx>
• write-intent bitmaps
  • From: Russell Coker <russell@xxxxxxxxxxxx>
• safe mode for grow?
  • From: Nagilum <nagilum@xxxxxxxxxxx>
• Re: question about mdadm
  • From: Andre Noll <maan@xxxxxxxxxxxxxxx>
• raid1, questions and/or ideas for improvement
  • From: Markus Hochholdinger <Markus@xxxxxxxxxxxxxxxxx>
• question about mdadm
  • From: "Edward Hourigan" <ehourigan@xxxxxxxxx>
• Re: Error mounting a reiserfs on renamed raid1
  • From: Clemens Koller <clemens.koller@xxxxxxxxxxx>
• hdparm patch with min/max transfer rate, and min/avg/max access times
  • From: Keld Jørn Simonsen <keld@xxxxxxxx>
• Re: The SX4 challenge
  • From: Jarmo Järvenpää <jarmo.jarvenpaa@xxxxxxxxxxx>
• Re: Error mounting a reiserfs on renamed raid1
  • From: Robin Hill <robin@xxxxxxxxxxxxxxx>
• Error mounting a reiserfs on renamed raid1
  • From: Clemens Koller <clemens.koller@xxxxxxxxxxx>
• [PATCH reposted] raid1 load balancing
  • From: Samuel Tardieu <sam@xxxxxxxxxxx>
• Re: 2.6.24-rc6 reproducible raid5 hang
  • From: Tim Southerwood <ts@xxxxxxxxxx>
• Re: [BUG] The kernel thread for md RAID1 could cause a md RAID1 array deadlock
  • From: "K.Tanaka" <k-tanaka@xxxxxxxxxxxxx>
• Re: idle array consuming cpu ??!!
  • From: Neil Brown <neilb@xxxxxxx>
• Re: [BUG] The kernel thread for md RAID1 could cause a md RAID1 array deadlock
  • From: Neil Brown <neilb@xxxxxxx>
• Re: idle array consuming cpu ??!!
  • From: Bill Davidsen <davidsen@xxxxxxx>
• Re: Fwd: Error on /dev/sda, but takes down RAID-1
  • From: Neil Brown <neilb@xxxxxxx>
• performance of raid10,f2 on 4 disks
  • From: Keld Jørn Simonsen <keld@xxxxxxxx>
• Re: Fwd: Error on /dev/sda, but takes down RAID-1
  • From: Michael Tokarev <mjt@xxxxxxxxxx>
• Re: 2.6.24-rc6 reproducible raid5 hang
  • From: carlos@xxxxxxxxxxxxxx (Carlos Carvalho)
• Re: AACRAID driver broken in 2.6.22.x (and beyond?) [WAS: Re: 2.6.22.16 MD raid1 doesn't mark removed disk faulty, MD thread goes UN]
  • From: "Mike Snitzer" <snitzer@xxxxxxxxx>
• Re: identifying failed disk/s in an array.
  • From: Nagilum <nagilum@xxxxxxxxxxx>
• Fwd: Error on /dev/sda, but takes down RAID-1
  • From: Martin Seebach <mail@xxxxxxxxxxxxxxxx>
• RE: AACRAID driver broken in 2.6.22.x (and beyond?) [WAS: Re: 2.6.22.16 MD raid1 doesn't mark removed disk faulty, MD thread goes UN]
  • From: "Salyzyn, Mark" <Mark_Salyzyn@xxxxxxxxxxx>
• Re: 2.6.24-rc6 reproducible raid5 hang
  • From: Tim Southerwood <ts@xxxxxxxxxx>
• Re: identifying failed disk/s in an array.
  • From: Wolfgang Denk <wd@xxxxxxx>
• Re: identifying failed disk/s in an array.
  • From: David Greaves <david@xxxxxxxxxxxx>
• Re: identifying failed disk/s in an array.
  • From: Tomasz Chmielewski <mangoo@xxxxxxxx>
• identifying failed disk/s in an array.
  • From: "Michael Harris" <michael.harris@xxxxxxxxxxx>
• Problem with raid5 grow/resize (not restripe)
  • From: Peter Rabbitson <rabbit+list@xxxxxxxxx>
• AACRAID driver broken in 2.6.22.x (and beyond?) [WAS: Re: 2.6.22.16 MD raid1 doesn't mark removed disk faulty, MD thread goes UN]
  • From: "Mike Snitzer" <snitzer@xxxxxxxxx>
• Re: idle array consuming cpu ??!!
  • From: carlos@xxxxxxxxxxxxxx (Carlos Carvalho)
• Re: idle array consuming cpu ??!!
  • From: Bill Davidsen <davidsen@xxxxxxx>
• [PATCH] md: constify function pointer tables
  • From: Jan Engelhardt <jengelh@xxxxxxxxxxxxxxx>
• Re: One Large md or Many Smaller md for Better Peformance?
  • From: Iustin Pop <iusty@xxxxxxxxx>
• Re: One Large md or Many Smaller md for Better Peformance?
  • From: Tomasz Chmielewski <mangoo@xxxxxxxx>
• Re: One Large md or Many Smaller md for Better Peformance?
  • From: Bill Davidsen <davidsen@xxxxxxx>
• Raid1, mdadm and nfs that remains in D state
  • From: BERTRAND Joël <joel.bertrand@xxxxxxxxxxx>
• Re: One Large md or Many Smaller md for Better Peformance?
  • From: Moshe Yudkowsky <moshe@xxxxxxxxx>
• Re: [RFC] A SCSI fault injection framework using SystemTap.
  • From: "K.Tanaka" <k-tanaka@xxxxxxxxxxxxx>
• Re: 2.6.22.16 MD raid1 doesn't mark removed disk faulty, MD thread goes UN
  • From: "Mike Snitzer" <snitzer@xxxxxxxxx>
• Re: One Large md or Many Smaller md for Better Peformance?
  • From: carlos@xxxxxxxxxxxxxx (Carlos Carvalho)
• Re: idle array consuming cpu ??!!
  • From: carlos@xxxxxxxxxxxxxx (Carlos Carvalho)
• 2.6.22.16 MD raid1 doesn't mark removed disk faulty, MD thread goes UN
  • From: "Mike Snitzer" <snitzer@xxxxxxxxx>
• Re: One Large md or Many Smaller md for Better Peformance?
  • From: Ask Bjørn Hansen <ask@xxxxxxxxxxxxxx>
• Re: mdadm error when trying to replace a failed drive in RAID5 array
  • From: Ask Bjørn Hansen <ask@xxxxxxxxxxxxxx>
• raid10 messed up by false multipath setup (was: raid10 messed up filesystem, lvm lv ok)
  • From: Ask Bjørn Hansen <ask@xxxxxxxxxxxxxx>
• Re: array doesn't run even with --force
  • From: carlos@xxxxxxxxxxxxxx (Carlos Carvalho)
• Re: One Large md or Many Smaller md for Better Peformance?
  • From: Moshe Yudkowsky <moshe@xxxxxxxxx>
• Re: One Large md or Many Smaller md for Better Performance?
  • From: Moshe Yudkowsky <moshe@xxxxxxxxx>
• Re: array doesn't run even with --force
  • From: Neil Brown <neilb@xxxxxxx>
• Re: array doesn't run even with --force
  • From: carlos@xxxxxxxxxxxxxx (Carlos Carvalho)
• Re: idle array consuming cpu ??!!
  • From: carlos@xxxxxxxxxxxxxx (Carlos Carvalho)
• Re: idle array consuming cpu ??!!
  • From: Neil Brown <neilb@xxxxxxx>
• Re: array doesn't run even with --force
  • From: Neil Brown <neilb@xxxxxxx>
• array doesn't run even with --force
  • From: carlos@xxxxxxxxxxxxxx (Carlos Carvalho)
• idle array consuming cpu ??!!
  • From: carlos@xxxxxxxxxxxxxx (Carlos Carvalho)
• Re: One Large md or Many Smaller md for Better Peformance?
  • From: Iustin Pop <iusty@xxxxxxxxx>
• Re: One Large md or Many Smaller md for Better Peformance?
  • From: Bill Davidsen <davidsen@xxxxxxx>
• Re: how to create a degraded raid1 with only 1 of 2 drives ??
  • From: Bill Davidsen <davidsen@xxxxxxx>
• Re: how to create a degraded raid1 with only 1 of 2 drives ??
  • From: David Greaves <david@xxxxxxxxxxxx>
• RE: mdadm error when trying to replace a failed drive in RAID5 array
  • From: "Steve Fairbairn" <steve@xxxxxxxxxxxxxxxxxxxx>
• Re: mdadm error when trying to replace a failed drive in RAID5 array
  • From: Robin Hill <robin@xxxxxxxxxxxxxxx>
• RE: mdadm error when trying to replace a failed drive in RAID5 array
  • From: "Steve Fairbairn" <steve@xxxxxxxxxxxxxxxxxxxx>
• One Large md or Many Smaller md for Better Peformance?
  • From: Moshe Yudkowsky <moshe@xxxxxxxxx>
• Performance of RAID 10 vs. using LVM?
  • From: Moshe Yudkowsky <moshe@xxxxxxxxx>
• Re: how to create a degraded raid1 with only 1 of 2 drives ??
  • From: michael@xxxxxxxxx