Linux RAID Storage Date Index

Thread Index

Re: Sharing disks amoung multiple software RAIDs
- From: Alex Davis <alex14641@xxxxxxxxx>
Re: Sharing disks amoung multiple software RAIDs
- From: Keld Jørn Simonsen <keld@xxxxxxxx>
Re: oops in linear_mergeable_bvec
- From: "marco gaddoni" <marco.gaddoni@xxxxxxxxx>
Re: Sharing disks amoung multiple software RAIDs
- From: "George Spelvin" <linux@xxxxxxxxxxx>
Re: Sharing disks amoung multiple software RAIDs
- From: David Greaves <david@xxxxxxxxxxxx>
Re: Sharing disks amoung multiple software RAIDs
- From: Kasper Sandberg <lkml@xxxxxxxxxxx>
Re: [PATCH] md: fix raid5 'repair' operations
- From: Neil Brown <neilb@xxxxxxx>
Re: How to grow RAID1 mirror on top of LVM?
- From: Lars Täuber <taeuber@xxxxxxx>
Re: Sharing disks amoung multiple software RAIDs
- From: "David Rees" <drees76@xxxxxxxxx>
Re: oops in linear_mergeable_bvec
- From: Neil Brown <neilb@xxxxxxx>
[PATCH] md: fix raid5 'repair' operations
- From: Dan Williams <dan.j.williams@xxxxxxxxx>
Re: How to grow RAID1 mirror on top of LVM?
- From: Neil Brown <neilb@xxxxxxx>
Re: Can't get rid of RAID-5 mismatches
- From: "Dan Williams" <dan.j.williams@xxxxxxxxx>
RE: Sharing disks amoung multiple software RAIDs
- From: Kasper Sandberg <lkml@xxxxxxxxxxx>
RE: Sharing disks amoung multiple software RAIDs
- From: "David Lethe" <david@xxxxxxxxxxxx>
Re: [PATCH 1/3] md: ping userspace on 'write-pending' events
- From: Neil Brown <neilb@xxxxxxx>
Re: Sharing disks amoung multiple software RAIDs
- From: Alex Davis <alex14641@xxxxxxxxx>
Re: Sharing disks amoung multiple software RAIDs
- From: Kasper Sandberg <lkml@xxxxxxxxxxx>
Re: Sharing disks amoung multiple software RAIDs
- From: Nick Andrew <nick@xxxxxxxxxxxxxxx>
Re: Raid5 grow interrupted, failed
- From: Twigathy <twigathy@xxxxxxxxx>
Re: parallel resync
- From: Neil Brown <neilb@xxxxxxx>
Re: Can't get rid of RAID-5 mismatches
- From: "Dan Williams" <dan.j.williams@xxxxxxxxx>
Re: LSI SAS1068E based controllers and md RAID
- From: Richard Scobie <richard@xxxxxxxxxxx>
RE: Can't get rid of RAID-5 mismatches
- From: "David Lethe" <david@xxxxxxxxxxxx>
Can't get rid of RAID-5 mismatches
- From: "George Spelvin" <linux@xxxxxxxxxxx>
Re: parallel resync
- From: Bernd Schubert <bs@xxxxxxxxx>
LSI SAS1068E based controllers and md RAID
- From: Richard Scobie <richard@xxxxxxxxxxx>
Re: [PATCH 1/3] md: ping userspace on 'write-pending' events
- From: "Dan Williams" <dan.j.williams@xxxxxxxxx>
Raid5 grow interrupted, failed
- From: Twigathy <twigathy@xxxxxxxxx>
Re: Sharing disks amoung multiple software RAIDs
- From: Alex Davis <alex14641@xxxxxxxxx>
Re: Sharing disks amoung multiple software RAIDs
- From: David Greaves <david@xxxxxxxxxxxx>
Re: Sharing disks amoung multiple software RAIDs
- From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
Sharing disks amoung multiple software RAIDs
- From: Alex Davis <alex14641@xxxxxxxxx>
Re: Sleeping hard drives in an array?
- From: David Greaves <david@xxxxxxxxxxxx>
Re: Sleeping hard drives in an array?
- From: "Mario 'BitKoenig' Holbe" <Mario.Holbe@xxxxxxxxxxxxx>
Re: parallel resync
- From: Neil Brown <neilb@xxxxxxx>
Re: [PATCH 2/3] md: ping userspace on 'stop' events
- From: Neil Brown <neilb@xxxxxxx>
Re: [PATCH 1/3] md: ping userspace on 'write-pending' events
- From: Neil Brown <neilb@xxxxxxx>
Re: [PATCH 3/3] md: add new / required locking for calls to blk_remove_plug and blk_plug_queue
- From: Neil Brown <neilb@xxxxxxx>
Re: [PATCH 3/3] md: add new / required locking for calls to blk_remove_plug and blk_plug_queue
- From: "Dan Williams" <dan.j.williams@xxxxxxxxx>
Re: [PATCH 3/3] md: add new / required locking for calls to blk_remove_plug and blk_plug_queue
- From: Neil Brown <neilb@xxxxxxx>
Sleeping hard drives in an array?
- From: "Greg Cormier" <gcormier@xxxxxxxxx>
Re: Keeping debian from auto-assembling
- From: David Greaves <david@xxxxxxxxxxxx>
Re: degraded array after reboot *again*
- From: Dexter Filmore <Dexter.Filmore@xxxxxx>
Keeping debian from auto-assembling
- From: Dexter Filmore <Dexter.Filmore@xxxxxx>
Re: diskinfo script
- From: David Greaves <david@xxxxxxxxxxxx>
[PATCH 3/3] md: add new / required locking for calls to blk_remove_plug and blk_plug_queue
- From: Dan Williams <dan.j.williams@xxxxxxxxx>
[PATCH 2/3] md: ping userspace on 'stop' events
- From: Dan Williams <dan.j.williams@xxxxxxxxx>
[PATCH 1/3] md: ping userspace on 'write-pending' events
- From: Dan Williams <dan.j.williams@xxxxxxxxx>
[PATCH 0/3] A few more md patches for 2.6.26
- From: Dan Williams <dan.j.williams@xxxxxxxxx>
Re: diskinfo script
- From: Bill Davidsen <davidsen@xxxxxxx>
diskinfo script
- From: Bill Davidsen <davidsen@xxxxxxx>
RE: How to grow RAID1 mirror on top of LVM?
- From: "David Lethe" <david@xxxxxxxxxxxx>
Re: --no-degraded in mdadm.conf? / disable auto assembly
- From: David Greaves <david@xxxxxxxxxxxx>
Re: --no-degraded in mdadm.conf? / disable auto assembly
- From: David Greaves <david@xxxxxxxxxxxx>
Re: degraded array after reboot *again*
- From: Dexter Filmore <Dexter.Filmore@xxxxxx>
--no-degraded in mdadm.conf? / disable auto assembly
- From: Dexter Filmore <Dexter.Filmore@xxxxxx>
parallel resync
- From: Bernd Schubert <bs@xxxxxxxxx>
Re: Online resize
- From: Wayne Gemmell <wayne@xxxxxxxxxxxxxxxx>
Re: How to grow RAID1 mirror on top of LVM?
- From: Lars Täuber <taeuber@xxxxxxx>
Re: [PATCH 008 of 9] md: md: raid5 rate limit error printk
- From: Neil Brown <neilb@xxxxxxx>
Re: [PATCH 007 of 9] md: prevent duplicates in bind_rdev_to_array
- From: Neil Brown <neilb@xxxxxxx>
Re: [PATCH 008 of 9] md: md: raid5 rate limit error printk
- From: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
Re: [PATCH 007 of 9] md: prevent duplicates in bind_rdev_to_array
- From: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
[PATCH 009 of 9] md: md: support blocking writes to an array on device failure
- From: NeilBrown <neilb@xxxxxxx>
[PATCH 008 of 9] md: md: raid5 rate limit error printk
- From: NeilBrown <neilb@xxxxxxx>
[PATCH 007 of 9] md: prevent duplicates in bind_rdev_to_array
- From: NeilBrown <neilb@xxxxxxx>
[PATCH 005 of 9] md: Fix up switching md arrays between read-only and read-write
- From: NeilBrown <neilb@xxxxxxx>
[PATCH 006 of 9] md: Remove a stray command from a copy and paste error in resync_start_store
- From: NeilBrown <neilb@xxxxxxx>
[PATCH 004 of 9] md: Fix 'safemode' handling for external metadata.
- From: NeilBrown <neilb@xxxxxxx>
[PATCH 003 of 9] md: Reinitialise more mddev fields in do_md_stop.
- From: NeilBrown <neilb@xxxxxxx>
[PATCH 002 of 9] md: Skip all metadata update processing when using external metadata.
- From: NeilBrown <neilb@xxxxxxx>
[PATCH 001 of 9] md: Fix use after free when removing rdev via sysfs
- From: NeilBrown <neilb@xxxxxxx>
[PATCH 000 of 9] md: Assorted patches for the 2.5.26 merge window
- From: NeilBrown <neilb@xxxxxxx>
Re: Online resize
- From: Neil Brown <neilb@xxxxxxx>
Re: [patch] limit error rate
- From: Bernd Schubert <bernd-schubert@xxxxxx>
RE: How to grow RAID1 mirror on top of LVM?
- From: "David Lethe" <david@xxxxxxxxxxxx>
Re: ahci slow transfer rate with kernel 2.6.23-2.6.25
- From: "kyle" <kylewong@xxxxxxxxxx>
Re: How to grow RAID1 mirror on top of LVM?
- From: Lars Täuber <taeuber@xxxxxxx>
RE: degraded array after reboot *again*
- From: "David Lethe" <david@xxxxxxxxxxxx>
degraded array after reboot *again*
- From: Dexter Filmore <Dexter.Filmore@xxxxxx>
RE: mdadm crashing server?
- From: Keith Roberts <keith@xxxxxxxxxxxx>
RE: mdadm crashing server?
- From: Luke Sheldrick <luke@xxxxxxxxxxxxxxx>
Re: Question: how to identify failing disk in a RAID1
- From: Richard Scobie <richard@xxxxxxxxxxx>
Re: Question: how to identify failing disk in a RAID1
- From: Michael Tokarev <mjt@xxxxxxxxxx>
Re: Question: how to identify failing disk in a RAID1
- From: Keith Roberts <keith@xxxxxxxxxxxx>
Re: mdadm crashing server?
- From: Keith Roberts <keith@xxxxxxxxxxxx>
mdadm crashing server?
- From: Luke Sheldrick <luke@xxxxxxxxxxxxxxx>
Help recovering from failed disk on RAID 6
- From: "Joshua Johnson" <enigma2175@xxxxxxxxx>
Re: [patch] limit error rate
- From: Neil Brown <neilb@xxxxxxx>
Re: Question: how to identify failing disk in a RAID1
- From: Mark Hahn <hahn@xxxxxxxxxxx>
Re: Question: how to identify failing disk in a RAID1
- From: Richard Scobie <richard@xxxxxxxxxxx>
Re: Question: how to identify failing disk in a RAID1
- From: Keith Roberts <keith@xxxxxxxxxxxx>
Re: Can't create partitions on raid, --auto=mdp not possible
- From: Michal Soltys <soltys@xxxxxxxx>
Re: Can't create partitions on raid, --auto=mdp not possible
- From: michael@xxxxxxxxx
Re: managing raid on Linux
- From: Bill Davidsen <davidsen@xxxxxxx>
Re: Can't create partitions on raid, --auto=mdp not possible
- From: Dexter Filmore <Dexter.Filmore@xxxxxx>
Can't create partitions on raid, --auto=mdp not possible
- From: Dexter Filmore <Dexter.Filmore@xxxxxx>
Bug(?) in raid10 (raid10,f2 - lvm2 - xen)
- From: "Tomasz Nowak" <tnowak-p@xxxxxxxxxxxxx>
Re: [patch] limit error rate
- From: Bernd Schubert <bernd-schubert@xxxxxx>
Re: Question: how to identify failing disk in a RAID1
- From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
RE: managing raid on Linux
- From: "David Lethe" <david@xxxxxxxxxxxx>
Re: Question: how to identify failing disk in a RAID1
- From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
RE: managing raid on Linux
- From: "David Lethe" <david@xxxxxxxxxxxx>
Re: PCI ATA EIDE cards and kernel drivers
- From: Bill Davidsen <davidsen@xxxxxxx>
Re: managing raid on linux
- From: "Ty! Boyack" <ty@xxxxxxxxxxxxxxxxxx>
Re: managing raid on linux
- From: Bill Davidsen <davidsen@xxxxxxx>
Re: [patch] limit error rate
- From: "Dan Williams" <dan.j.williams@xxxxxxxxx>
Multipath behavior
- From: "Billy Crook" <bcrook@xxxxxxxxxxxxxxxxxxxxxx>
Re: PCI ATA EIDE cards and kernel drivers
- From: "John Stoffel" <john@xxxxxxxxxxx>
Re: Incorrect array member slot assignment during assemble
- From: jay@xxxxxxxxxxxxxxxxxxxxxxxxx
PCI ATA EIDE cards and kernel drivers
- From: Keith Roberts <keith@xxxxxxxxxxxx>
RE: Incorrect array member slot assignment during assemble
- From: carlos@xxxxxxxxxxxxxx (Carlos Carvalho)
RE: Incorrect array member slot assignment during assemble
- From: "David Lethe" <david@xxxxxxxxxxxx>
Re: Incorrect array member slot assignment during assemble
- From: carlos@xxxxxxxxxxxxxx (Carlos Carvalho)
Re: mdadm.conf unnecessary?
- From: Richard Scobie <richard@xxxxxxxxxxx>
mdadm.conf unnecessary?
- From: Dexter Filmore <Dexter.Filmore@xxxxxx>
Re: migrating: degrade or grow
- From: Dexter Filmore <Dexter.Filmore@xxxxxx>
Re: migrating: degrade or grow
- From: michael@xxxxxxxxx
Re: Incorrect array member slot assignment during assemble
- From: jay@xxxxxxxxxxxxxxxxxxxxxxxxx
ext3: how to determine mkfs parameters?
- From: Dexter Filmore <Dexter.Filmore@xxxxxx>
migrating: degrade or grow
- From: Dexter Filmore <Dexter.Filmore@xxxxxx>
Re: Incorrect array member slot assignment during assemble
- From: carlos@xxxxxxxxxxxxxx (Carlos Carvalho)
managing raid on linux
- From: devzero@xxxxxx
Incorrect array member slot assignment during assemble
- From: jay@xxxxxxxxxxxxxxxxxxxxxxxxx
RE: Need some information and help on mdadm in order to support it on IBM z Systems
- From: "David Lethe" <david@xxxxxxxxxxxx>
Re: Need some information and help on mdadm in order to support it on IBM z Systems
- From: pg_lxra@xxxxxxxxxxxxxxxxxxx (Peter Grandi)
RE: RAID1 == two different ARRAY in scan, and Q on read error corrected
- From: "David Lethe" <david@xxxxxxxxxxxx>
Re: RAID1 == two different ARRAY in scan, and Q on read error corrected
- From: Richard Scobie <richard@xxxxxxxxxxx>
Re: RAID1 == two different ARRAY in scan, and Q on read error corrected
- From: Phil Lobbes <phil@xxxxxxxxxxxxxxxx>
Re: Software/ Hardware RAID info
- From: Keld Jørn Simonsen <keld@xxxxxxxx>
RE: Software/ Hardware RAID info
- From: pg_lxra@xxxxxxxxxxxxxxxxxxx (Peter Grandi)
Re: RAID1 == two different ARRAY in scan, and Q on read error corrected
- From: Richard Scobie <richard@xxxxxxxxxxx>
RE: Software/ Hardware RAID info
- From: "David Lethe" <david@xxxxxxxxxxxx>
RE: RAID1 == two different ARRAY in scan, and Q on read error corrected
- From: "David Lethe" <david@xxxxxxxxxxxx>
Software/ Hardware RAID info
- From: Rick Bragg <lists@xxxxxxxxx>
Re: RAID1 == two different ARRAY in scan, and Q on read error corrected
- From: Richard Scobie <richard@xxxxxxxxxxx>
RAID1 == two different ARRAY in scan, and Q on read error corrected
- From: Phil Lobbes <phil@xxxxxxxxxxxxxxxx>
Re: Question: how to identify failing disk in a RAID1
- From: "David Lethe" <david@xxxxxxxxxxxx>
RE: Re: Need some information and help on mdadm in order to support it on IBM z Systems
- From: "David Lethe" <david@xxxxxxxxxxxx>
Re: Question: how to identify failing disk in a RAID1
- From: Bill Davidsen <davidsen@xxxxxxx>
Re: Need some information and help on mdadm in order to support it on IBM z Systems
- From: "Mario 'BitKoenig' Holbe" <Mario.Holbe@xxxxxxxxxxxxx>
Re: Question: how to identify failing disk in a RAID1
- From: Bill Davidsen <davidsen@xxxxxxx>
Re: Need some information and help on mdadm in order to support it on IBM z Systems
- From: Jean-Baptiste Joret <JORET@xxxxxxxxxx>
RE: Mapping physical disk block to logical block to selectively repair w/o forcing rescan
- From: "David Lethe" <david@xxxxxxxxxxxx>
Re: Mapping physical disk block to logical block to selectively repair w/o forcing rescan
- From: Bill Davidsen <davidsen@xxxxxxx>
Re: Welcome to linux-raid
- From: Ulrich Enslin <ulrichenslin@xxxxxxxxx>
Re: Mapping physical disk block to logical block to selectively repair w/o forcing rescan
- From: "Dan Williams" <dan.j.williams@xxxxxxxxx>
RE: Mapping physical disk block to logical block to selectively repair w/o forcing rescan
- From: "David Lethe" <david@xxxxxxxxxxxx>
Re: Mapping physical disk block to logical block to selectively repair w/o forcing rescan
- From: "Dan Williams" <dan.j.williams@xxxxxxxxx>
Re: Mapping physical disk block to logical block to selectively repair w/o forcing rescan
- From: "Dan Williams" <dan.j.williams@xxxxxxxxx>
Re: Mapping physical disk block to logical block to selectively repair w/o forcing rescan
- From: Janek Kozicki <janek_listy@xxxxx>
RE: Mapping physical disk block to logical block to selectively repair w/o forcing rescan
- From: "David Lethe" <david@xxxxxxxxxxxx>
Re: Question: how to identify failing disk in a RAID1
- From: Bill Davidsen <davidsen@xxxxxxx>
Re: soft-lockup in raid5 / 2.6.24
- From: "Dan Williams" <dan.j.williams@xxxxxxxxx>
Re: Question: how to identify failing disk in a RAID1
- From: Bill Davidsen <davidsen@xxxxxxx>
Re: Need some information and help on mdadm in order to support it on IBM z Systems
- From: Jean-Baptiste Joret <JORET@xxxxxxxxxx>
Re: soft-lockup in raid5 / 2.6.24
- From: dean gaudet <dean@xxxxxxxxxx>
Re: Question: how to identify failing disk in a RAID1
- From: Bill Davidsen <davidsen@xxxxxxx>
Re: Question: how to identify failing disk in a RAID1
- From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
Question: how to identify failing disk in a RAID1
- From: Maurice Hilarius <maurice@xxxxxxxxxxxx>
Re: two questions re. proactive recovery and forced assembly
- From: Richard Scobie <richard@xxxxxxxxxxx>
[patch] limit error rate
- From: Bernd Schubert <bernd-schubert@xxxxxx>
Re: Need some information and help on mdadm in order to support it on IBM z Systems
- From: Bill Davidsen <davidsen@xxxxxxx>
Re: emergency recovery
- From: Bill Davidsen <davidsen@xxxxxxx>
Need some information and help on mdadm in order to support it on IBM z Systems
- From: Jean-Baptiste Joret <JORET@xxxxxxxxxx>
Re: Data corruption on software RAID
- From: Mikulas Patocka <mikulas@xxxxxxxxxxxxxxxxxxxxxxxx>
Re: emergency recovery
- From: "jeff sacksteder" <jsacksteder@xxxxxxxxx>
Re: emergency recovery
- From: "jeff sacksteder" <jsacksteder@xxxxxxxxx>
Re: emergency recovery
- From: john <john4lists@xxxxxxxxx>
Re: emergency recovery
- From: "Mario 'BitKoenig' Holbe" <Mario.Holbe@xxxxxxxxxxxxx>
Re: emergency recovery
- From: john <john4lists@xxxxxxxxx>
Re: mdadm Issue
- From: Stuart Clouston <stuartc@xxxxxxxxxxxxxxxxx>
two questions re. proactive recovery and forced assembly
- From: rosenfield.albert@xxxxxxxxx
Re: emergency recovery
- From: "Mario 'BitKoenig' Holbe" <Mario.Holbe@xxxxxxxxxxxxx>
emergency recovery
- From: "jeff sacksteder" <jsacksteder@xxxxxxxxx>
Re: Data corruption on software RAID
- From: Mikulas Patocka <mikulas@xxxxxxxxxxxxxxxxxxxxxxxx>
[PATCH] md: close a livelock window in handle_parity_checks5
- From: Dan Williams <dan.j.williams@xxxxxxxxx>
Re: drive failed, need help with interpretation / recovery
- From: Richard Scobie <richard@xxxxxxxxxxx>
Re: Data corruption on software RAID
- From: Bill Davidsen <davidsen@xxxxxxx>
drive failed, need help with interpretation / recovery
- From: "Christian Pernegger" <pernegger@xxxxxxxxx>
Re: Write-Intent Bitmaps and disk caches
- From: "Mike Snitzer" <snitzer@xxxxxxxxx>
RAID-6/External Bitmap Issues
- From: Henry Huang <hwh6k@xxxxxxxxxxxxx>
Re: Re-assembling a software RAID in which device names have changed.
- From: Michal Soltys <soltys@xxxxxxxx>
Write-Intent Bitmaps and disk caches
- From: "Ty! Boyack" <ty@xxxxxxxxxxxxxxxxxx>
Re: Re-assembling a software RAID in which device names have changed.
- From: "Sean H." <silverwraithii@xxxxxxxxx>
Re: Is it possilble to be "delay tolerant" or have "slow dropout" of unavailable components?
- From: Peter Rabbitson <rabbit+list@xxxxxxxxx>
Re: Re-assembling a software RAID in which device names have changed.
- From: Michael Tokarev <mjt@xxxxxxxxxx>
Re: Is it possilble to be "delay tolerant" or have "slow dropout" of unavailable components?
- From: "Ty! Boyack" <ty@xxxxxxxxxxxxxxxxxx>
Re: Is it possilble to be "delay tolerant" or have "slow dropout" of unavailable components?
- From: Markus Hochholdinger <Markus@xxxxxxxxxxxxxxxxx>
Re: Re-assembling a software RAID in which device names have changed.
- From: "Sean H." <silverwraithii@xxxxxxxxx>
Is it possilble to be "delay tolerant" or have "slow dropout" of unavailable components?
- From: "Ty! Boyack" <ty@xxxxxxxxxxxxxxxxxx>
Re: Re-assembling a software RAID in which device names have changed.
- From: Michael Tokarev <mjt@xxxxxxxxxx>
Re: Data corruption on software RAID
- From: Mikulas Patocka <mikulas@xxxxxxxxxxxxxxxxxxxxxxxx>
Re: Data corruption on software RAID
- From: Helge Hafting <helge.hafting@xxxxxxxxxxxxx>
Re-assembling a software RAID in which device names have changed.
- From: "Sean H." <silverwraithii@xxxxxxxxx>
Re: soft-lockup in raid5 / 2.6.24
- From: dean gaudet <dean@xxxxxxxxxx>
Data corruption on software RAID
- From: Mikulas Patocka <mikulas@xxxxxxxxxxxxxxxxxxxxxxxx>
Re: soft-lockup in raid5 / 2.6.24
- From: "Dan Williams" <dan.j.williams@xxxxxxxxx>
Re: How to rename MD device (e.g. md3 -> md2)?
- From: Zlatko Calusic <zlatko.calusic@xxxxxxxx>
Re: How to rename MD device (e.g. md3 -> md2)?
- From: "Dan Williams" <dan.j.williams@xxxxxxxxx>
Re: How to rename MD device (e.g. md3 -> md2)?
- From: pg_lxra@xxxxxxxxxxxxxxxxxxx (Peter Grandi)
Re: how to disable partition search?
- From: Ferenc Wagner <wferi@xxxxxxx>
How to rename MD device (e.g. md3 -> md2)?
- From: Zlatko Calusic <zlatko.calusic@xxxxxxxx>
soft-lockup in raid5 / 2.6.24
- From: dean gaudet <dean@xxxxxxxxxx>
Re: how to disable partition search?
- From: Ferenc Wagner <wferi@xxxxxxx>
Re: how to disable partition search?
- From: Luca Berra <bluca@xxxxxxxxxx>
Re: INFO: task md1_resync:3897 blocked for more than 120 seconds.
- From: Christian Kujau <lists@xxxxxxxxxxxxxxx>
INFO: task md1_resync:3897 blocked for more than 120 seconds.
- From: Christian Kujau <christian@xxxxxxxxxxxxxxx>
Re: performance problems with raid10,f2
- From: Keld Jørn Simonsen <keld@xxxxxxxx>
Re: performance problems with raid10,f2
- From: pg_lxra@xxxxxxxxxxxxxxxxxxx (Peter Grandi)
Re: RAID 1 failure on single disk causes disk subsystem to lock up
- From: Robert L Mathews <lists@xxxxxxxxxxxxx>
Re: Can't grow raid5 size
- From: Shane W <shane-kernel@xxxxxx>
Re: segfault in mdadm v2.6.4
- From: "Dan Williams" <dan.j.williams@xxxxxxxxx>
Re: Can't grow raid5 size
- From: Shane W <shane-kernel@xxxxxx>
Re: segfault in mdadm v2.6.4
- From: "Brett Dikeman" <brett@xxxxxxxxxx>
Re: segfault in mdadm v2.6.4
- From: "Dan Williams" <dan.j.williams@xxxxxxxxx>
Re: segfault in mdadm v2.6.4
- From: "Christian Pernegger" <pernegger@xxxxxxxxx>
Re: performance problems with raid10,f2
- From: Keld Jørn Simonsen <keld@xxxxxxxx>
segfault in mdadm v2.6.4
- From: Brett Dikeman <brett@xxxxxxxxxx>
Re: RAID 1 failure on single disk causes disk subsystem to lock up
- From: pg_lxra@xxxxxxxxxxxxxxxxxxx (Peter Grandi)
Re: performance problems with raid10,f2
- From: pg_lxra@xxxxxxxxxxxxxxxxxxx (Peter Grandi)
Re: (was: Re: md: raid5 vs raid10 (f2,n2,o2) benchmarks [w/10 raptors])
- From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
Re: (was: Re: md: raid5 vs raid10 (f2,n2,o2) benchmarks [w/10 raptors])
- From: Keld Jørn Simonsen <keld@xxxxxxxx>
Re: (was: Re: md: raid5 vs raid10 (f2,n2,o2) benchmarks [w/10 raptors])
- From: "Dan Williams" <dan.j.williams@xxxxxxxxx>
[RFC][PATCH] md: avoid fullsync if a faulty member missed a dirty transition
- From: Mike Snitzer <snitzer@xxxxxxxxx>
Re: performance problems with raid10,f2
- From: Keld Jørn Simonsen <keld@xxxxxxxx>
Re: RAID 1 failure on single disk causes disk subsystem to lock up
- From: Robert L Mathews <lists@xxxxxxxxxxxxx>
Re: RAID 1 failure on single disk causes disk subsystem to lock up
- From: Robert L Mathews <lists@xxxxxxxxxxxxx>
Re: (was: Re: md: raid5 vs raid10 (f2,n2,o2) benchmarks [w/10 raptors])
- From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
Re: (was: Re: md: raid5 vs raid10 (f2,n2,o2) benchmarks [w/10 raptors])
- From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
Re: RAID 1 failure on single disk causes disk subsystem to lock up
- From: Bill Davidsen <davidsen@xxxxxxx>
Re: (was: Re: md: raid5 vs raid10 (f2,n2,o2) benchmarks [w/10 raptors])
- From: "Conway S. Smith" <beolach@xxxxxxxxx>
Re: (was: Re: md: raid5 vs raid10 (f2,n2,o2) benchmarks [w/10 raptors])
- From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
(was: Re: md: raid5 vs raid10 (f2,n2,o2) benchmarks [w/10 raptors])
- From: Beolach <beolach@xxxxxxxxx>
Re: RAID 1 failure on single disk causes disk subsystem to lock up
- From: Richard Scobie <richard@xxxxxxxxxxx>
Re: RAID 1 failure on single disk causes disk subsystem to lock up
- From: pg_lxra@xxxxxxxxxxxxxxxxxxx (Peter Grandi)
Re: raid1 will force fullsync when it seemingly should not
- From: "Mike Snitzer" <snitzer@xxxxxxxxx>
raid1 will force fullsync when it seemingly should not
- From: "Mike Snitzer" <snitzer@xxxxxxxxx>
Re: RAID 1 failure on single disk causes disk subsystem to lock up
- From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
Re: RAID 1 failure on single disk causes disk subsystem to lock up
- From: Robert L Mathews <lists@xxxxxxxxxxxxx>
Re: RAID 1 failure on single disk causes disk subsystem to lock up
- From: Robert L Mathews <lists@xxxxxxxxxxxxx>
Re: Can't grow raid5 size
- From: "NeilBrown" <neilb@xxxxxxx>
Re: RAID 1 failure on single disk causes disk subsystem to lock up
- From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
RAID 1 failure on single disk causes disk subsystem to lock up
- From: Robert L Mathews <lists@xxxxxxxxxxxxx>
Can't grow raid5 size
- From: Shane W <shane-kernel@xxxxxx>
Re: raid10 vs raid5 - strange performance
- From: Keld Jørn Simonsen <keld@xxxxxxxx>
Re: raid10 vs raid5 - strange performance
- From: Keld Jørn Simonsen <keld@xxxxxxxx>
Re: raid10 vs raid5 - strange performance
- From: pg_lxra@xxxxxxxxxxxxxxxxxxx (Peter Grandi)
Re: raid10 vs raid5 - strange performance
- From: Keld Jørn Simonsen <keld@xxxxxxxx>
Re: raid10 vs raid5 - strange performance
- From: Keld Jørn Simonsen <keld@xxxxxxxx>
Re: raid10 vs raid5 - strange performance
- From: Iustin Pop <iusty@xxxxxxxxx>
Re: raid10 vs raid5 - strange performance
- From: Bill Davidsen <davidsen@xxxxxxx>
md: raid5 vs raid10 (f2,n2,o2) benchmarks [w/10 raptors]
- From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
Re: [PATCH] md: Subject: introduce get_priority_stripe() to improve raid456 write performance
- From: Dan Williams <dan.j.williams@xxxxxxxxx>
Re: [PATCH] md: Subject: introduce get_priority_stripe() to improve raid456 write performance
- From: "NeilBrown" <neilb@xxxxxxx>
Re: [PATCH] md: Subject: introduce get_priority_stripe() to improve raid456 write performance
- From: Dan Williams <dan.j.williams@xxxxxxxxx>
Re: Reopen: 16 HDDs too much for RAID6?
- From: Bernd Schubert <bs@xxxxxxxxx>
Re: Reopen: 16 HDDs too much for RAID6?
- From: Lars Täuber <taeuber@xxxxxxx>
Re: Reopen: 16 HDDs too much for RAID6?
- From: Bernd Schubert <bs@xxxxxxxxx>
Re: Reopen: 16 HDDs too much for RAID6?
- From: Lars Täuber <taeuber@xxxxxxx>
Re: Reopen: 16 HDDs too much for RAID6?
- From: Bernd Schubert <bs@xxxxxxxxx>
Reopen: 16 HDDs too much for RAID6?
- From: Lars Täuber <taeuber@xxxxxxx>
Re: component growing in raid5
- From: Mattias Wadenstein <maswan@xxxxxxxxxx>
Re: [PATCH] md: Subject: introduce get_priority_stripe() to improve raid456 write performance
- From: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
[PATCH] md: Subject: introduce get_priority_stripe() to improve raid456 write performance
- From: NeilBrown <neilb@xxxxxxx>
Re: component growing in raid5
- From: Richard Scobie <richard@xxxxxxxxxxx>
Re: data corruption: ext3/lvm2/md/mptsas/vitesse/seagate
- From: Marc Bejarano <beej@xxxxxxxxxxxx>
Re: component growing in raid5
- From: Mattias Wadenstein <maswan@xxxxxxxxxx>
Re: raid10 vs raid5 - strange performance
- From: Keld Jørn Simonsen <keld@xxxxxxxx>
Re: Why are MD block IO requests subject to 'plugging'?
- From: Neil Brown <neilb@xxxxxxx>
Re: raid10 vs raid5 - strange performance
- From: "Christian Pernegger" <pernegger@xxxxxxxxx>
Re: raid10 vs raid5 - strange performance
- From: "Christian Pernegger" <pernegger@xxxxxxxxx>
Re: how to disable partition search?
- From: Ferenc Wagner <wferi@xxxxxxx>
Re: uuids missing
- From: bressen@xxxxxxxxx (Andrew K. Bressen)
Re: how to disable partition search?
- From: Bill Davidsen <davidsen@xxxxxxx>
Re: raid10 vs raid5 - strange performance
- From: Keld Jørn Simonsen <keld@xxxxxxxx>
Re: MDP major registration
- From: Bill Davidsen <davidsen@xxxxxxx>
uuids missing
- From: akb+lists.linux-raid@xxxxxxxxx (Andrew K. Bressen)
[PATCH] XFS tuning on software RAID5 partitionable array; was: MDP major registration
- From: Hubert Verstraete <hubskml@xxxxxxx>
Re: raid10 vs raid5 - strange performance
- From: Keld Jørn Simonsen <keld@xxxxxxxx>
Re: MDP major registration
- From: Hubert Verstraete <hubskml@xxxxxxx>
Re: raid10 vs raid5 - strange performance
- From: "Christian Pernegger" <pernegger@xxxxxxxxx>
Re: raid10 vs raid5 - strange performance
- From: "Christian Pernegger" <pernegger@xxxxxxxxx>
Re: data corruption: ext3/lvm2/md/mptsas/vitesse/seagate
- From: "Grant Grundler" <grundler@xxxxxxxxxx>
Re: raid, lvm, and reused disks crashing initramfs
- From: Bill Davidsen <davidsen@xxxxxxx>
Re: raid10 vs raid5 - strange performance
- From: Bill Davidsen <davidsen@xxxxxxx>
Re: MDP major registration
- From: Bill Davidsen <davidsen@xxxxxxx>
how to disable partition search?
- From: Ferenc Wagner <wferi@xxxxxxx>
raid, lvm, and reused disks crashing initramfs
- From: akb+lists.linux-raid@xxxxxxxxx (Andrew K. Bressen)
Re: What do Events actually mean?
- From: David Greaves <david@xxxxxxxxxxxx>
Re: What do Events actually mean?
- From: David Greaves <david@xxxxxxxxxxxx>
Re: MDP major registration
- From: Luca Berra <bluca@xxxxxxxxxx>
Re: data corruption: ext3/lvm2/md/mptsas/vitesse/seagate
- From: Marc Bejarano <beej@xxxxxxxxxxxx>
RE: mismatch_cnt of 128 and 1408.
- From: "Guy Watkins" <linux-raid@xxxxxxxxxxxxxxxx>
Re: data corruption: ext3/lvm2/md/mptsas/vitesse/seagate
- From: "Grant Grundler" <grundler@xxxxxxxxxx>
Re: data corruption: ext3/lvm2/md/mptsas/vitesse/seagate
- From: Marc Bejarano <beej@xxxxxxxxxxxx>
Re: raid10 vs raid5 - strange performance
- From: Keld Jørn Simonsen <keld@xxxxxxxx>
Re: raid10 vs raid5 - strange performance
- From: "Christian Pernegger" <pernegger@xxxxxxxxx>
Re: raid10 vs raid5 - strange performance
- From: "David Rees" <drees76@xxxxxxxxx>
raid10 vs raid5 - strange performance
- From: "Christian Pernegger" <pernegger@xxxxxxxxx>
Re: component growing in raid5
- From: pg_lxra@xxxxxxxxxxxxxxxxxxx (Peter Grandi)
Re: Why are MD block IO requests subject to 'plugging'?
- From: pg_lxra@xxxxxxxxxxxxxxxxxxx (Peter Grandi)
Re: MDP major registration
- From: Hubert Verstraete <hubskml@xxxxxxx>
Re: irc channel for linux-raid
- From: Janek Kozicki <janek_listy@xxxxx>
Re: Verifying spare drive, best practices
- From: Bill Davidsen <davidsen@xxxxxxx>
Re: irc channel for linux-raid
- From: Bill Davidsen <davidsen@xxxxxxx>
Re: Redundancy check using "echo check > sync_action": error reporting?
- From: Bill Davidsen <davidsen@xxxxxxx>
Re: Verifying spare drive, best practices
- From: Peter Evertz <leo2@xxxxxxxxxxxxxx>
Re: component growing in raid5
- From: Mattias Wadenstein <maswan@xxxxxxxxxx>
Re: performance problems with raid10,f2
- From: pg_lxra@xxxxxxxxxxxxxxxxxxx (Peter Grandi)
Re: component growing in raid5
- From: pg_lxra@xxxxxxxxxxxxxxxxxxx (Peter Grandi)
Re: mismatch_cnt of 128 and 1408.
- From: Janek Kozicki <janek_listy@xxxxx>
Why are MD block IO requests subject to 'plugging'?
- From: pg_lxra@xxxxxxxxxxxxxxxxxxx (Peter Grandi)
Re: performance problems with raid10,f2
- From: Keld Jørn Simonsen <keld@xxxxxxxx>
Re: Redundancy check using "echo check > sync_action": error reporting?
- From: Mattias Wadenstein <maswan@xxxxxxxxxx>
Re: Redundancy check using "echo check > sync_action": error reporting?
- From: Peter Rabbitson <rabbit+list@xxxxxxxxx>
Re: How to grow RAID1 mirror on top of LVM?
- From: Anton Altaparmakov <aia21@xxxxxxxxx>
Re: MDP major registration
- From: Neil Brown <neilb@xxxxxxx>
Re: How to grow RAID1 mirror on top of LVM?
- From: Neil Brown <neilb@xxxxxxx>
Re: RAID5 initial resync: faster vs more secure
- From: Neil Brown <neilb@xxxxxxx>
Re: performance problems with raid10,f2
- From: Neil Brown <neilb@xxxxxxx>
Re: mdadm -A erased the superblock ?
- From: Neil Brown <neilb@xxxxxxx>
Re: Verifying spare drive, best practices
- From: Neil Brown <neilb@xxxxxxx>
Re: Redundancy check using "echo check > sync_action": error reporting?
- From: Neil Brown <neilb@xxxxxxx>
Re: Redundancy check using "echo check > sync_action": error reporting?
- From: Neil Brown <neilb@xxxxxxx>
Re: xfs+md(raid5) xfssyncd & kswapd & pdflush hung in d-state
- From: Nagy Zoltan <kirk@xxxxxxxx>
Re: What do Events actually mean?
- From: Neil Brown <neilb@xxxxxxx>
Re: Task blocked for more than 120 seconds
- From: Neil Brown <neilb@xxxxxxx>
Re: FW: [PATCH 008 of 9] md: Fix possible raid1/raid10 deadlock on read error during resync.
- From: Neil Brown <neilb@xxxxxxx>
Re: mismatch_cnt of 128 and 1408.
- From: Neil Brown <neilb@xxxxxxx>
Re: xfs+md(raid5) xfssyncd & kswapd & pdflush hung in d-state
- From: David Chinner <dgc@xxxxxxx>
Re: mdadm what does it mean
- From: Kenneth Aar <kenneth@xxxxxxxxxxxx>
Re: mismatch_cnt of 128 and 1408.
- From: Oliver Martin <oliver.martin@xxxxxxxxxxxxxxxxxxxx>
Re: FW: [PATCH 008 of 9] md: Fix possible raid1/raid10 deadlock on read error during resync.
- From: "John Z." <md2sf@xxxxxxxx>
Re: component growing in raid5
- From: Nagy Zoltan <kirk@xxxxxxxx>
Re: component growing in raid5
- From: Peter Rabbitson <rabbit+list@xxxxxxxxx>
Re: component growing in raid5
- From: Nagy Zoltan <kirk@xxxxxxxx>
Task blocked for more than 120 seconds
- From: Samuel Tardieu <sam@xxxxxxxxxxx>
mismatch_cnt of 128 and 1408.
- From: Janek Kozicki <janek_listy@xxxxx>
Re: component growing in raid5
- From: Peter Rabbitson <rabbit+list@xxxxxxxxx>
Re: component growing in raid5
- From: Peter Rabbitson <rabbit@xxxxxxxxx>
Re: component growing in raid5
- From: pg_lxra@xxxxxxxxxxxxxxxxxxx (Peter Grandi)
component growing in raid5
- From: Nagy Zoltan <kirk@xxxxxxxx>
Re: Help: Re-assemble raid-5 with inconsistent events.
- From: Arthur Britto <ahbritto@xxxxxxx>
Re: What do Events actually mean?
- From: David Greaves <david@xxxxxxxxxxxx>
Re: What do Events actually mean?
- From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
Re: What do Events actually mean?
- From: David Greaves <david@xxxxxxxxxxxx>
Re: Help: Re-assemble raid-5 with inconsistent events.
- From: Bill Davidsen <davidsen@xxxxxxx>
Re: Verifying spare drive, best practices
- From: Bill Davidsen <davidsen@xxxxxxx>
Re: Redundancy check using "echo check > sync_action": error reporting?
- From: Bill Davidsen <davidsen@xxxxxxx>
Re: Redundancy check using "echo check > sync_action": error reporting?
- From: Bill Davidsen <davidsen@xxxxxxx>
Re: mdadm -A erased the superblock ?
- From: Pradeep <pradeepjp@xxxxxxxxx>
Re: Redundancy check using "echo check > sync_action": error reporting?
- From: Bas van Schaik <bas@xxxxxxxx>
Re: Redundancy check using "echo check > sync_action": error reporting?
- From: Theodore Tso <tytso@xxxxxxx>
What do Events actually mean?
- From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
Re: Redundancy check using "echo check > sync_action": error reporting?
- From: Peter Rabbitson <rabbit+list@xxxxxxxxx>
Help: Re-assemble raid-5 with inconsistent events.
- From: Arthur Britto <ahbritto@xxxxxxx>
Re: Redundancy check using "echo check > sync_action": error reporting?
- From: Robin Hill <robin@xxxxxxxxxxxxxxx>
Re: Redundancy check using "echo check > sync_action": error reporting?
- From: carlos@xxxxxxxxxxxxxx (Carlos Carvalho)
Re: Redundancy check using "echo check > sync_action": error reporting?
- From: Bill Davidsen <davidsen@xxxxxxx>
Re: Redundancy check using "echo check > sync_action": error reporting?
- From: Ric Wheeler <ric@xxxxxxx>
Re: Redundancy check using "echo check > sync_action": error reporting?
- From: "NeilBrown" <neilb@xxxxxxx>
Re: mdadm -A erased the superblock ?
- From: "NeilBrown" <neilb@xxxxxxx>
Re: Redundancy check using "echo check > sync_action": error reporting?
- From: Robin Hill <robin@xxxxxxxxxxxxxxx>
Re: Redundancy check using "echo check > sync_action": error reporting?
- From: Peter Rabbitson <rabbit+list@xxxxxxxxx>
Re: Redundancy check using "echo check > sync_action": error reporting?
- From: Theodore Tso <tytso@xxxxxxx>
Re: Verifying spare drive, best practices
- From: carlos@xxxxxxxxxxxxxx (Carlos Carvalho)
Re: the '--setra 65536' mistery, analysis and WTF?
- From: Nat Makarevitch <nat@xxxxxxxxxxxxxxx>
Re: Redundancy check using "echo check > sync_action": error reporting?
- From: Peter Rabbitson <rabbit+list@xxxxxxxxx>
Re: Redundancy check using "echo check > sync_action": error reporting?
- From: Bill Davidsen <davidsen@xxxxxxx>
Re: Redundancy check using "echo check > sync_action": error reporting?
- From: Ric Wheeler <ric@xxxxxxx>
Verifying spare drive, best practices
- From: Maurice Hilarius <maurice@xxxxxxxxxxxx>
Re: Redundancy check using "echo check > sync_action": error reporting?
- From: Peter Rabbitson <rabbit+list@xxxxxxxxx>
mdadm -A erased the superblock ?
- From: Pradeep <pradeepjp@xxxxxxxxx>
Re: Redundancy check using "echo check > sync_action": error reporting?
- From: Andre Noll <maan@xxxxxxxxxxxxxxx>
Re: Redundancy check using "echo check > sync_action": error reporting?
- From: Theodore Tso <tytso@xxxxxxx>
Re: Redundancy check using "echo check > sync_action": error reporting?
- From: Andre Noll <maan@xxxxxxxxxxxxxxx>
Re: performance problems with raid10,f2
- From: Keld Jørn Simonsen <keld@xxxxxxxx>
RAID5 initial resync: faster vs more secure
- From: Hubert Verstraete <hubskml@xxxxxxx>
Re: Redundancy check using "echo check > sync_action": error reporting?
- From: Robin Hill <robin@xxxxxxxxxxxxxxx>
Re: Redundancy check using "echo check > sync_action": error reporting?
- From: Theodore Tso <tytso@xxxxxxx>
Re: Redundancy check using "echo check > sync_action": error reporting?
- From: Robin Hill <robin@xxxxxxxxxxxxxxx>
Re: mdadm what does it mean
- From: David Greaves <david@xxxxxxxxxxxx>
Re: Redundancy check using "echo check > sync_action": error reporting?
- From: Bas van Schaik <bas@xxxxxxxx>
Re: Redundancy check using "echo check > sync_action": error reporting?
- From: Robin Hill <robin@xxxxxxxxxxxxxxx>
Re: Redundancy check using "echo check > sync_action": error reporting?
- From: Bas van Schaik <bas@xxxxxxxx>
Re: Redundancy check using "echo check > sync_action": error reporting?
- From: Robin Hill <robin@xxxxxxxxxxxxxxx>
Re: Redundancy check using "echo check > sync_action": error reporting?
- From: Bas van Schaik <bas@xxxxxxxx>
Re: the '--setra 65536' mistery, analysis and WTF?
- From: pg_lxra@xxxxxxxxxxxxxxxxxxx (Peter Grandi)
Re: Change Chunk Size on Array?
- From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
Re: ioatdma
- From: "Dan Williams" <dan.j.williams@xxxxxxxxx>
mdadm what does it mean
- From: Kenneth Aar <kenneth@xxxxxxxxxxxx>
Re: the '--setra 65536' mistery, analysis and WTF?
- From: pg_lxra@xxxxxxxxxxxxxxxxxxx (Peter Grandi)
ioatdma
- From: Bernd Schubert <bs@xxxxxxxxx>
ioatdma
- From: Bernd Schubert <bs@xxxxxxxxx>
Change Chunk Size on Array?
- From: crshman <crshman@xxxxxxxxx>
[git pull] async_tx and a fsldma fix for 2.6.25-rc
- From: Dan Williams <dan.j.williams@xxxxxxxxx>
Re: Useful benchmarking tools for RAID
- From: Richard Scobie <richard@xxxxxxxxxxx>
Re: Useful benchmarking tools for RAID
- From: pg_lxra@xxxxxxxxxxxxxxxxxxx (Peter Grandi)
Re: software for making initrd's with raid support
- From: Luca Berra <bluca@xxxxxxxxxx>
Re: Multiple partitions on the same disk
- From: Richard Scobie <richard@xxxxxxxxxxx>
Re: Redundancy check using "echo check > sync_action": error reporting?
- From: Janek Kozicki <janek_listy@xxxxx>
Redundancy check using "echo check > sync_action": error reporting?
- From: Bas van Schaik <bas@xxxxxxxx>
irc channel for linux-raid
- From: Keld Jørn Simonsen <keld@xxxxxxxx>
Re: software for making initrd's with raid support
- From: Keld Jørn Simonsen <keld@xxxxxxxx>
Re: software for making initrd's with raid support
- From: Luca Berra <bluca@xxxxxxxxxx>
performance problems with raid10,f2
- From: Keld Jørn Simonsen <keld@xxxxxxxx>
Multiple partitions on the same disk
- From: "Cody" <cody@xxxxxxxxxxxxx>
Re: software for making initrd's with raid support
- From: Keld Jørn Simonsen <keld@xxxxxxxx>
Re: software for making initrd's with raid support
- From: Luca Berra <bluca@xxxxxxxxxx>
Re: auto-assembling arrays without a configuration file
- From: Neil Brown <neilb@xxxxxxx>
[PATCH] md: Remove the 'super' sysfs attribute from devices in an 'md' array.
- From: NeilBrown <neilb@xxxxxxx>
Re: sysfs Kernel BUG when RAID bitmap file has IO errors
- From: Neil Brown <neilb@xxxxxxx>
Re: Useful benchmarking tools for RAID
- From: Bryan Mark Mesich <bmesich@xxxxxxxxxxxxxxxxxxxxxxxxxx>
Re: Useful benchmarking tools for RAID
- From: Richard Scobie <richard@xxxxxxxxxxx>
Re: Useful benchmarking tools for RAID
- From: pg_lxra@xxxxxxxxxxxxxxxxxxx (Peter Grandi)
Re: first partition on partitionable RAID-5 array
- From: pg_lxra@xxxxxxxxxxxxxxxxxxx (Peter Grandi)
Re: Useful benchmarking tools for RAID
- From: michael@xxxxxxxxx
Re: the '--setra 65536' mistery, analysis and WTF?
- From: Nat Makarevitch <nat@xxxxxxxxxxxxxxx>
Re: software for making initrd's with raid support
- From: Keld Jørn Simonsen <keld@xxxxxxxx>
How to grow RAID1 mirror on top of LVM?
- From: Anton Altaparmakov <aia21@xxxxxxxxx>
Re: software for making initrd's with raid support
- From: Luca Berra <bluca@xxxxxxxxxx>
MDP major registration
- From: Hubert Verstraete <hubskml@xxxxxxx>
software for making initrd's with raid support
- From: Keld Jørn Simonsen <keld@xxxxxxxx>
Useful benchmarking tools for RAID
- From: Bryan Mark Mesich <bmesich@xxxxxxxxxxxxxxxxxxxxxxxxxx>
Re: sysfs Kernel BUG when RAID bitmap file has IO errors
- From: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
Re: sysfs Kernel BUG when RAID bitmap file has IO errors
- From: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
Re: LVM performance
- From: Guntsche Michael <mike@xxxxxxxxxxxx>
Re: LVM performance
- From: pg_lxra@xxxxxxxxxxxxxxxxxxxxxx (Peter Grandi)
Help! 3ware 7508-8: i/o errors, now arry not recognized anymore ...
- From: "Christian Pernegger" <pernegger@xxxxxxxxx>
first partition on partitionable RAID-5 array
- From: Hubert Verstraete <hubskml@xxxxxxx>
Re: LVM performance
- From: Michael Guntsche <mike@xxxxxxxxxxxx>
Re: [dm-crypt] Re: md-raid5, dm-crypt, alignment and readahead
- From: "Christian Pernegger" <pernegger@xxxxxxxxx>
Re: [dm-crypt] Re: md-raid5, dm-crypt, alignment and readahead
- From: Pasi Kärkkäinen <pasik@xxxxxx>
Re: Online resize
- From: Wayne Gemmell <wayne@xxxxxxxxxxxxxxxx>
Re: LVM performance
- From: pg_lxra@xxxxxxxxxxxxxxxxxxx (Peter Grandi)
Re: md-raid5, dm-crypt, alignment and readahead
- From: pg_lxra@xxxxxxxxxxxxxxxxxxx (Peter Grandi)
Re: sysfs Kernel BUG when RAID bitmap file has IO errors
- From: Tomasz Chmielewski <mangoo@xxxxxxxx>
sysfs Kernel BUG when RAID bitmap file has IO errors
- From: Tomasz Chmielewski <mangoo@xxxxxxxx>
Re: Online resize
- From: Michael Tokarev <mjt@xxxxxxxxxx>
Re: Online resize
- From: Robin Hill <robin@xxxxxxxxxxxxxxx>
Re: Online resize
- From: Wayne Gemmell <wayne@xxxxxxxxxxxxxxxx>
Re: Online resize
- From: Michael Tokarev <mjt@xxxxxxxxxx>
Re: Online resize
- From: Wayne Gemmell <wayne@xxxxxxxxxxxxxxxx>
Re: Online resize
- From: Wayne Gemmell <wayne@xxxxxxxxxxxxxxxx>
media error but no I/O error
- From: Pallai Roland <dap@xxxxxxxxxxxxx>
Re: md-raid5, dm-crypt, alignment and readahead
- From: "Christian Pernegger" <pernegger@xxxxxxxxx>
Re: data corruption: ext3/lvm2/md/mptsas/vitesse/seagate
- From: Marc Bejarano <beej@xxxxxxxxxxxx>
problem with JBOD mode on MegaRAID
- From: Louis-David Mitterrand <vindex+lists-linux-raid@xxxxxxxxxxx>
Re: need help, possibly shred my array, no backups, debian install issue - safe for now
- From: Dexter Filmore <Dexter.Filmore@xxxxxx>
Re: Online resize
- From: Robin Hill <robin@xxxxxxxxxxxxxxx>
need help, possibly shred my array, no backups, debian install issue
- From: Dexter Filmore <Dexter.Filmore@xxxxxx>
Re: Online resize
- From: Wayne Gemmell <wayne@xxxxxxxxxxxxxxxx>
Re: Online resize
- From: Robin Hill <robin@xxxxxxxxxxxxxxx>
Online resize
- From: Wayne Gemmell <wayne@xxxxxxxxxxxxxxxx>
Re: data corruption: ext3/lvm2/md/mptsas/vitesse/seagate
- From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
Re: data corruption: ext3/lvm2/md/mptsas/vitesse/seagate
- From: Janek Kozicki <janek_listy@xxxxx>
md-raid5, dm-crypt, alignment and readahead
- From: "Christian Pernegger" <pernegger@xxxxxxxxx>
Re: data corruption: ext3/lvm2/md/mptsas/vitesse/seagate
- From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
Re: data corruption: ext3/lvm2/md/mptsas/vitesse/seagate
- From: Marc Bejarano <beej@xxxxxxxxxxxx>
Re: auto-assembling arrays without a configuration file
- From: Andre Noll <maan@xxxxxxxxxxxxxxx>
Re: Setting up md-raid5: observations, errors, questions
- From: "Christian Pernegger" <pernegger@xxxxxxxxx>
Re: auto-assembling arrays without a configuration file
- From: Keld Jørn Simonsen <keld@xxxxxxxx>
Re: LVM performance
- From: Oliver Martin <oliver.martin@xxxxxxxxxxxxxxxxxxxx>
Re: LVM performance
- From: Michael Guntsche <mike@xxxxxxxxxxxx>
Re: LVM performance
- From: Richard Scobie <richard@xxxxxxxxxxx>
Re: LVM performance
- From: Michael Guntsche <mike@xxxxxxxxxxxx>
Re: LVM performance
- From: Richard Scobie <richard@xxxxxxxxxxx>
Re: LVM performance
- From: Michael Guntsche <mike@xxxxxxxxxxxx>
Re: LVM performance
- From: Oliver Martin <oliver.martin@xxxxxxxxxxxxxxxxxxxx>
Re: auto-assembling arrays without a configuration file
- From: Neil Brown <neilb@xxxxxxx>
the '--setra 65536' mistery, analysis and WTF?
- From: <pg_mh@xxxxxxxxxx>
Re: LVM performance
- From: Michael Guntsche <mike@xxxxxxxxxxxx>
Re: LVM performance
- From: Oliver Martin <oliver.martin@xxxxxxxxxxxxxxxxxxxx>
Re: data corruption: ext3/lvm2/md/mptsas/vitesse/seagate
- From: "Grant Grundler" <grundler@xxxxxxxxxx>
Re: data corruption: ext3/lvm2/md/mptsas/vitesse/seagate
- From: Bill Davidsen <davidsen@xxxxxxx>
Re: auto-assembling arrays without a configuration file
- From: Keld Jørn Simonsen <keld@xxxxxxxx>
auto-assembling arrays without a configuration file
- From: Keld Jørn Simonsen <keld@xxxxxxxx>
Re: data corruption: ext3/lvm2/md/mptsas/vitesse/seagate
- From: Marc Bejarano <beej@xxxxxxxxxxxx>
Re: LVM performance
- From: pg_lxra@xxxxxxxxxxxxxxxxxxx (Peter Grandi)
Re: equal size not large enough for RAID1?
- From: Lars Täuber <taeuber@xxxxxxx>
Re: 16 HDDs too much for RAID6?
- From: Lars Täuber <taeuber@xxxxxxx>
Re: 16 HDDs too much for RAID6?
- From: Andre Noll <maan@xxxxxxxxxxxxxxx>
Re: 16 HDDs too much for RAID6?
- From: Luca Berra <bluca@xxxxxxxxxx>
[PATCH 002 of 2] md: Reduce CPU wastage on idle md array with a write-intent bitmap. fix
- From: NeilBrown <neilb@xxxxxxx>
[PATCH 001 of 2] md: Fix formatting error in /proc/mdstat.
- From: NeilBrown <neilb@xxxxxxx>
[PATCH 000 of 2] md: To more bugfixes for 2.6.25
- From: NeilBrown <neilb@xxxxxxx>
Re: equal size not large enough for RAID1?
- From: Neil Brown <neilb@xxxxxxx>
Re: data corruption: ext3/lvm2/md/mptsas/vitesse/seagate
- From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
Re: data corruption: ext3/lvm2/md/mptsas/vitesse/seagate
- From: Janek Kozicki <janek_listy@xxxxx>
Re: data corruption: ext3/lvm2/md/mptsas/vitesse/seagate
- From: Steve Cousins <steve.cousins@xxxxxxxxx>
data corruption: ext3/lvm2/md/mptsas/vitesse/seagate
- From: Marc Bejarano <beej@xxxxxxxxxxxx>
Re: [PATCH 001 of 9] md: Fix deadlock in md/raid1 and md/raid10 when handling a read error.
- From: Janek Kozicki <janek_listy@xxxxx>
Re: 16 HDDs too much for RAID6?
- From: Andre Noll <maan@xxxxxxxxxxxxxxx>
Re: RAID5 in sync does not populate slots sequentially, shows array as (somewhat) faulty
- From: Rui Santos <rsantos@xxxxxxxxxxxx>
Re: RAID-5 data corruption
- From: Oliver Martin <oliver.martin@xxxxxxxxxxxxxxxxxxxx>
Re: 16 HDDs too much for RAID6?
- From: Lars Täuber <taeuber@xxxxxxx>
Re: [PATCH 001 of 9] md: Fix deadlock in md/raid1 and md/raid10 when handling a read error.
- From: Andre Noll <maan@xxxxxxxxxxxxxxx>
Re: 16 HDDs too much for RAID6?
- From: Andre Noll <maan@xxxxxxxxxxxxxxx>
Re: equal size not large enough for RAID1?
- From: Lars Täuber <taeuber@xxxxxxx>
16 HDDs too much for RAID6?
- From: Lars Täuber <taeuber@xxxxxxx>
Re: [PATCH 001 of 9] md: Fix deadlock in md/raid1 and md/raid10 when handling a read error.
- From: Neil Brown <neilb@xxxxxxx>
Re: RAID-5 data corruption
- From: "Dan Williams" <dan.j.williams@xxxxxxxxx>
RAID-5 data corruption
- From: Oliver Martin <oliver.martin@xxxxxxxxxxxxxxxxxxxx>
Revisiting performance of RAID 10,f2
- From: Bruce Miller <subscribe@xxxxxxxxxxx>
equal size not large enough for RAID1?
- From: Lars Täuber <taeuber@xxxxxxx>
Re: Setting up md-raid5: observations, errors, questions
- From: "Christian Pernegger" <pernegger@xxxxxxxxx>
Re: Severe slowdown with LVM on RAID, alignment problem? - Autodetect?
- From: Janek Kozicki <janek_listy@xxxxx>
Re: Linux and SSD and how to decrease io delay : question, please
- From: Bill Davidsen <davidsen@xxxxxxx>
Re: [PATCH 001 of 9] md: Fix deadlock in md/raid1 and md/raid10 when handling a read error.
- From: Andre Noll <maan@xxxxxxxxxxxxxxx>
Re: RAID5 in sync does not populate slots sequentially, shows array as (somewhat) faulty
- From: Tor Arne Vestbø <torarnv@xxxxxxxxx>
Re: RAID5 in sync does not populate slots sequentially, shows array as (somewhat) faulty
- From: Peter Rabbitson <rabbit+list@xxxxxxxxx>
Re: RAID5 in sync does not populate slots sequentially, shows array as (somewhat) faulty
- From: Tor Arne Vestbø <torarnv@xxxxxxxxx>
Re: RAID5 in sync does not populate slots sequentially, shows array as (somewhat) faulty
- From: Peter Rabbitson <rabbit+list@xxxxxxxxx>
Re: Creating RAID5 with four devices and end up with 5 (one removed and one spare). Why?
- From: Tor Arne Vestbø <torarnv@xxxxxxxxx>
Re: [PATCH 001 of 9] md: Fix deadlock in md/raid1 and md/raid10 when handling a read error.
- From: Neil Brown <neilb@xxxxxxx>
Re: Setting up md-raid5: observations, errors, questions
- From: "Christian Pernegger" <pernegger@xxxxxxxxx>
Re: RAID5 in sync does not populate slots sequentially, shows array as (somewhat) faulty
- From: Bill Davidsen <davidsen@xxxxxxx>
Re: Setting up md-raid5: observations, errors, questions
- From: Bill Davidsen <davidsen@xxxxxxx>
Re: Strange RAID-5 rebuild problem
- From: Bill Davidsen <davidsen@xxxxxxx>
Re: Corrupted RAID 50 (aparently?) array. Help needed.
- From: Bill Davidsen <davidsen@xxxxxxx>
Re: Linux and SSD and how to decrease io delay : question, please
- From: Bill Davidsen <davidsen@xxxxxxx>
Re: [PATCH 001 of 9] md: Fix deadlock in md/raid1 and md/raid10 when handling a read error.
- From: Andre Noll <maan@xxxxxxxxxxxxxxx>
Re: Strange RAID-5 rebuild problem
- From: Michael Guntsche <mike@xxxxxxxxxxxx>
Re: RAID5 in sync does not populate slots sequentially, shows array as (somewhat) faulty
- From: Tor Arne Vestbø <torarnv@xxxxxxxxx>
RAID5 in sync does not populate slots sequentially, shows array as (somewhat) faulty
- From: Peter Rabbitson <rabbit+list@xxxxxxxxx>
Re: Creating RAID5 with four devices and end up with 5 (one removed and one spare). Why?
- From: Tor Arne Vestbø <torarnv@xxxxxxxxx>
Re: Creating RAID5 with four devices and end up with 5 (one removed and one spare). Why?
- From: "Mario 'BitKoenig' Holbe" <Mario.Holbe@xxxxxxxxxxxxx>
Re: Creating RAID5 with four devices and end up with 5 (one removed and one spare). Why?
- From: Tor Arne Vestbø <torarnv@xxxxxxxxx>
Re: Creating RAID5 with four devices and end up with 5 (one removed and one spare). Why?
- From: Robin Hill <robin@xxxxxxxxxxxxxxx>
Creating RAID5 with four devices and end up with 5 (one removed and one spare). Why?
- From: Tor Arne Vestbø <torarnv@xxxxxxxxx>
Re: Setting up md-raid5: observations, errors, questions
- From: "Christian Pernegger" <pernegger@xxxxxxxxx>
Re: Setting up md-raid5: observations, errors, questions
- From: Michael Tokarev <mjt@xxxxxxxxxx>
Re: Strange RAID-5 rebuild problem
- From: Neil Brown <neilb@xxxxxxx>
Re: Corrupted RAID 50 (aparently?) array. Help needed.
- From: "Nicolas Mella" <nmella@xxxxxxxxx>
[PATCH 009 of 9] md: The md RAID10 resync thread could cause a md RAID10 array deadlock
- From: NeilBrown <neilb@xxxxxxx>
[PATCH 008 of 9] md: Fix possible raid1/raid10 deadlock on read error during resync.
- From: NeilBrown <neilb@xxxxxxx>
Re: Setting up md-raid5: observations, errors, questions
- From: "Christian Pernegger" <pernegger@xxxxxxxxx>
[PATCH 007 of 9] md: Don't attempt read-balancing for raid10 'far' layouts.
- From: NeilBrown <neilb@xxxxxxx>
[PATCH 006 of 9] md: Lock access to rdev attributes properly
- From: NeilBrown <neilb@xxxxxxx>
[PATCH 005 of 9] md: Make sure a reshape is started when device switches to read-write.
- From: NeilBrown <neilb@xxxxxxx>
[PATCH 004 of 9] md: Clean up irregularity with raid autodetect.
- From: NeilBrown <neilb@xxxxxxx>
[PATCH 003 of 9] md: Guard against possible bad array geometry in v1 metadata.
- From: NeilBrown <neilb@xxxxxxx>
[PATCH 002 of 9] md: Reduce CPU wastage on idle md array with a write-intent bitmap.
- From: NeilBrown <neilb@xxxxxxx>
[PATCH 001 of 9] md: Fix deadlock in md/raid1 and md/raid10 when handling a read error.
- From: NeilBrown <neilb@xxxxxxx>
[PATCH 000 of 9] md: Introduction EXPLAIN PATCH SET HERE
- From: NeilBrown <neilb@xxxxxxx>
Re: [PATCH] The md RAID10 resync thread could cause a md RAID10 array deadlock
- From: Neil Brown <neilb@xxxxxxx>
Re: [BUGREPORT] The kernel thread for md RAID10 could cause a md RAID10 array deadlock
- From: Neil Brown <neilb@xxxxxxx>
Re: Setting up md-raid5: observations, errors, questions
- From: Michael Tokarev <mjt@xxxxxxxxxx>
Re: Setting up md-raid5: observations, errors, questions
- From: "Christian Pernegger" <pernegger@xxxxxxxxx>
Re: Strange RAID-5 rebuild problem
- From: Michael Guntsche <mike@xxxxxxxxxxxx>
Re: Setting up md-raid5: observations, errors, questions
- From: Michael Guntsche <mike@xxxxxxxxxxxx>
Re: Severe slowdown with LVM on RAID, alignment problem?
- From: Bill Davidsen <davidsen@xxxxxxx>
Re: Setting up md-raid5: observations, errors, questions
- From: "Christian Pernegger" <pernegger@xxxxxxxxx>
Re: Setting up md-raid5: observations, errors, questions
- From: Michael Tokarev <mjt@xxxxxxxxxx>
Re: Setting up md-raid5: observations, errors, questions
- From: "Christian Pernegger" <pernegger@xxxxxxxxx>
Re: Setting up md-raid5: observations, errors, questions
- From: Michael Tokarev <mjt@xxxxxxxxxx>
Re: Setting up md-raid5: observations, errors, questions
- From: "Christian Pernegger" <pernegger@xxxxxxxxx>
Re: Setting up md-raid5: observations, errors, questions
- From: Janek Kozicki <janek_listy@xxxxx>
Re: Setting up md-raid5: observations, errors, questions
- From: "Christian Pernegger" <pernegger@xxxxxxxxx>
Re: Setting up md-raid5: observations, errors, questions
- From: Robin Hill <robin@xxxxxxxxxxxxxxx>
Re: Setting up md-raid5: observations, errors, questions
- From: "Christian Pernegger" <pernegger@xxxxxxxxx>
Re: Setting up md-raid5: observations, errors, questions
- From: "Christian Pernegger" <pernegger@xxxxxxxxx>
Re: Setting up md-raid5: observations, errors, questions
- From: Janek Kozicki <janek_listy@xxxxx>
Re: Setting up md-raid5: observations, errors, questions
- From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
Re: Setting up md-raid5: observations, errors, questions
- From: "Christian Pernegger" <pernegger@xxxxxxxxx>
Re: Setting up md-raid5: observations, errors, questions
- From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
Re: Strange RAID-5 rebuild problem
- From: Robin Hill <robin@xxxxxxxxxxxxxxx>
Setting up md-raid5: observations, errors, questions
- From: "Christian Pernegger" <pernegger@xxxxxxxxx>
Re: Strange RAID-5 rebuild problem
- From: Michael Guntsche <mike@xxxxxxxxxxxx>
Re: Strange RAID-5 rebuild problem
- From: Michael Tokarev <mjt@xxxxxxxxxx>
Re: 2x6 or 3x4 raid10 arrays ?
- From: Nat Makarevitch <nat@xxxxxxxxxxxxxxx>
Re: Strange RAID-5 rebuild problem
- From: Michael Guntsche <mike@xxxxxxxxxxxx>
Re: Strange RAID-5 rebuild problem
- From: Michael Guntsche <mike@xxxxxxxxxxxx>
Re: 2x6 or 3x4 raid10 arrays ?
- From: Keld Jørn Simonsen <keld@xxxxxxxx>
Re: Strange RAID-5 rebuild problem
- From: Michael Guntsche <mike@xxxxxxxxxxxx>
Re: 2x6 or 3x4 raid10 arrays ?
- From: Nat Makarevitch <nat@xxxxxxxxxxxxxxx>
[Fwd: Strange RAID-5 rebuild problem]
- From: Bill Davidsen <davidsen@xxxxxxx>
Re: Strange RAID-5 rebuild problem
- From: Michael Guntsche <mike@xxxxxxxxxxxx>
Re: Severe slowdown with LVM on RAID, alignment problem?
- From: Michael Guntsche <mike@xxxxxxxxxxxx>
Re: 2x6 or 3x4 raid10 arrays ?
- From: Keld Jørn Simonsen <keld@xxxxxxxx>
Strange RAID-5 rebuild problem
- From: Michael Guntsche <mike@xxxxxxxxxxxx>
Re: 2x6 or 3x4 raid10 arrays ?
- From: Keld Jørn Simonsen <keld@xxxxxxxx>
Re: Severe slowdown with LVM on RAID, alignment problem?
- From: Bill Davidsen <davidsen@xxxxxxx>
Re: 2x6 or 3x4 raid10 arrays ?
- From: Keld Jørn Simonsen <keld@xxxxxxxx>
Re: Corrupted RAID 50 (aparently?) array. Help needed.
- From: Bill Davidsen <davidsen@xxxxxxx>
Re: Understanding bonnie++ results
- From: Franck Routier <franck.routier@xxxxxxxxx>
Re: 2x6 or 3x4 raid10 arrays ?
- From: Bill Davidsen <davidsen@xxxxxxx>
Re: 2x6 or 3x4 raid10 arrays ?
- From: Bill Davidsen <davidsen@xxxxxxx>
Re: very poor ext3 write performance on big filesystems?
- From: Bill Davidsen <davidsen@xxxxxxx>
Re: Understanding bonnie++ results
- From: Bill Davidsen <davidsen@xxxxxxx>
Re: Article aimed at general audience
- From: Bill Davidsen <davidsen@xxxxxxx>
Re: Understanding bonnie++ results
- From: Keld Jørn Simonsen <keld@xxxxxxxx>
Re: Severe slowdown with LVM on RAID, alignment problem?
- From: Michael Guntsche <mike@xxxxxxxxxxxx>
Re: Severe slowdown with LVM on RAID, alignment problem?
- From: Peter Rabbitson <rabbit+list@xxxxxxxxx>
Re: Understanding bonnie++ results
- From: Franck Routier <franck.routier@xxxxxxxxx>
Re: Understanding bonnie++ results
- From: Franck Routier <franck.routier@xxxxxxxxx>
Re: Understanding bonnie++ results
- From: Franck Routier <franck.routier@xxxxxxxxx>
Re: Understanding bonnie++ results
- From: Franck Routier <franck.routier@xxxxxxxxx>
Re: Severe slowdown with LVM on RAID, alignment problem?
- From: Michael Guntsche <mike@xxxxxxxxxxxx>
Re: Severe slowdown with LVM on RAID, alignment problem?
- From: Michael Guntsche <mike@xxxxxxxxxxxx>
Severe slowdown with LVM on RAID, alignment problem?
- From: Michael Guntsche <mike@xxxxxxxxxxxx>
Re: 2x6 or 3x4 raid10 arrays ?
- From: Nat Makarevitch <nat@xxxxxxxxxxxxxxx>
Re: 2x6 or 3x4 raid10 arrays ?
- From: Brendan Conoboy <blc@xxxxxxxxxx>
Re: 2x6 or 3x4 raid10 arrays ?
- From: Janek Kozicki <janek_listy@xxxxx>
Re: Corrupted RAID 50 (aparently?) array. Help needed.
- From: Janek Kozicki <janek_listy@xxxxx>
Corrupted RAID 50 (aparently?) array. Help needed.
- From: nmella@xxxxxxxxx
Re: how to use mkfs.ext3 "stride=" on LVM on RAID correctly?
- From: Michal Soltys <soltys@xxxxxxxx>
Re: Understanding bonnie++ results
- From: Keld Jørn Simonsen <keld@xxxxxxxx>
Corrupted RAID 50 (aparently?) array. Help needed.
- From: nmella@xxxxxxxxx
Re: 2x6 or 3x4 raid10 arrays ?
- From: Janek Kozicki <janek_listy@xxxxx>
Re: 2x6 or 3x4 raid10 arrays ?
- From: Brendan Conoboy <blc@xxxxxxxxxx>
Corrupted RAID 50 (aparently?) array. Help needed.
- From: mella.nicolas@xxxxxxxxx
Corrupted RAID 50 (aparently) array. Help needed.
- From: "Nicolas Mella" <nmella@xxxxxxxxx>
Corrupted RAID 50 (aparently?) array. Help needed.
- From: "Nicolas Mella" <nmella@xxxxxxxxx>
Re: how to use mkfs.ext3 "stride=" on LVM on RAID correctly?
- From: "Jon Nelson" <jnelson-linux-raid@xxxxxxxxxxx>
Re: 2x6 or 3x4 raid10 arrays ?
- From: Tim Southerwood <ts@xxxxxxxxxx>
2x6 or 3x4 raid10 arrays ?
- From: Franck Routier <franck.routier@xxxxxxxxx>
Understanding bonnie++ results
- From: Franck Routier <franck.routier@xxxxxxxxx>
how to use mkfs.ext3 "stride=" on LVM on RAID correctly?
- From: Tomasz Chmielewski <mangoo@xxxxxxxx>
[PATCH] The md RAID10 resync thread could cause a md RAID10 array deadlock
- From: "K.Tanaka" <k-tanaka@xxxxxxxxxxxxx>
Re: very poor ext3 write performance on big filesystems?
- From: Tomasz Chmielewski <mangoo@xxxxxxxx>
Re: very poor ext3 write performance on big filesystems?
- From: Andreas Dilger <adilger@xxxxxxx>
Re: Is 'fd' partition type of any use ?
- From: Robin Hill <robin@xxxxxxxxxxxxxxx>
Re: md3: unsupported reshape (reduce disks) required - aborting
- From: Bernd Schubert <bs@xxxxxxxxx>
Is 'fd' partition type of any use ?
- From: Franck Routier <franck.routier@xxxxxxxxx>
Re: Article aimed at general audience
- From: Keld Jørn Simonsen <keld@xxxxxxxx>
Article aimed at general audience
- From: Bruce Miller <subscribe@xxxxxxxxxxx>
Re: suns raid-z / zfs
- From: Bill Davidsen <davidsen@xxxxxxx>
md3: unsupported reshape (reduce disks) required - aborting
- From: Bernd Schubert <bs@xxxxxxxxx>
internal bitmap size
- From: Hubert Verstraete <hubskml@xxxxxxx>
Re: mdadm 2.6 creates slow RAID 5 while mdadm 2.5.6 rocks
- From: Hubert Verstraete <hubskml@xxxxxxx>
Re: raid1 error handling and faulty drives
- From: Philip Molter <philip@xxxxxxxxxxxxxxx>
Re: board/controller recommendations?
- From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
Re: board/controller recommendations?
- From: Dexter Filmore <Dexter.Filmore@xxxxxx>
Re: board/controller recommendations?
- From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
Re: RAID5 to RAID6 reshape?
- From: Nagilum <nagilum@xxxxxxxxxxx>
Kernel panic on RAID1 root after upgrade
- From: Richard Ray <rray@xxxxxxxxxxxxxxxx>
Re: board/controller recommendations?
- From: Dexter Filmore <Dexter.Filmore@xxxxxx>
Re: board/controller recommendations?
- From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
board/controller recommendations?
- From: Dexter Filmore <Dexter.Filmore@xxxxxx>
Re: mismatch_cnt != 0
- From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
Re: Further clarification of the sync_action check behavior.
- From: Richard Scobie <richard@xxxxxxxxxxx>
Re: RAID5 to RAID6 reshape?
- From: pg_lxra@xxxxxxxxxxxxxxxxxxx (Peter Grandi)
Re: mismatch_cnt != 0
- From: Janek Kozicki <janek_listy@xxxxx>
Re: mismatch_cnt != 0
- From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
Re: RAID10 far (f2) read throughput on random and sequential / read-ahead
- From: Keld Jørn Simonsen <keld@xxxxxxxx>
Re: mismatch_cnt != 0
- From: carlos@xxxxxxxxxxxxxx (Carlos Carvalho)
Re: RAID10 far (f2) read throughput on random and sequential / read-ahead
- From: Nat Makarevitch <nat@xxxxxxxxxxxxxxx>
Re: RAID5 to RAID6 reshape?
- From: Nagilum <nagilum@xxxxxxxxxxx>
Re: mismatch_cnt != 0
- From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
Re: mismatch_cnt != 0
- From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
Re: mismatch_cnt != 0
- From: Michael Tokarev <mjt@xxxxxxxxxx>
mismatch_cnt != 0
- From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
Odd performance observation for RAID0
- From: "Joe Landman" <joe.landman@xxxxxxxxx>
Increased Reliability by using Raid
- From: Pete/Piet Delaney <pete@xxxxxxxxxxxx>
Further clarification of the sync_action check behavior.
- From: "Harrell, Thomas" <tharrell@xxxxxxxxxxxxxx>
MD sysfs/kobject issues in SAN environment.
- From: greg@xxxxxxxxxxxx
Re: LVM performance
- From: Oliver Martin <oliver.martin@xxxxxxxxxxxxxxxxxxxx>
Re: RAID5 to RAID6 reshape?
- From: pg_lxra@xxxxxxxxxxxxxxxxxxxx (Peter Grandi)
RAID10 far (f2) read throughput on random and sequential / read-ahead
- From: Nat Makarevitch <nat@xxxxxxxxxxxxxxx>
Re: How many drives are bad?
- From: Peter Rabbitson <rabbit+list@xxxxxxxxx>
Re: How many drives are bad?
- From: <pg_mh@xxxxxxxxxx>
Re: How many drives are bad?
- From: Norman Elton <normelton@xxxxxxxxx>
Re: LVM performance (was: Re: RAID5 to RAID6 reshape?)
- From: pg_lxra@xxxxxxxxxxxxxxxxxxx (Peter Grandi)
Re: How many drives are bad?
- From: pg_lxra@xxxxxxxxxxxxxxxxxxx (Peter Grandi)
Re: suns raid-z / zfs
- From: "Mario 'BitKoenig' Holbe" <Mario.Holbe@xxxxxxxxxxxxx>
Re: How many drives are bad?
- From: Neil Brown <neilb@xxxxxxx>
Re: RAID5 to RAID6 reshape?
- From: Alexander Kühn <alexander.kuehn@xxxxxxxxxx>
Re: Linux Software RAID 5 + XFS Multi-Benchmarks / 10 Raptors Again
- From: pg_xfs2@xxxxxxxxxxxxxxx (Peter Grandi)
RE: How many drives are bad?
- From: "Guy Watkins" <linux-raid@xxxxxxxxxxxxxxxx>
RE: How many drives are bad?
- From: "Guy Watkins" <guy@xxxxxxxxxxxxxxxx>
Re: LVM performance
- From: Peter Rabbitson <rabbit+list@xxxxxxxxx>
Re: LVM performance (was: Re: RAID5 to RAID6 reshape?)
- From: Iustin Pop <iusty@xxxxxxxxx>
Re: LVM performance (was: Re: RAID5 to RAID6 reshape?)
- From: "Jon Nelson" <jnelson-linux-raid@xxxxxxxxxxx>
LVM performance (was: Re: RAID5 to RAID6 reshape?)
- From: Oliver Martin <oliver.martin@xxxxxxxxxxxxxxxxxxxx>
RE: How many drives are bad?
- From: "Steve Fairbairn" <steve@xxxxxxxxxxxxxxxxxxxx>
Re: How many drives are bad?
- From: "Norman Elton" <normelton@xxxxxxxxx>
Re: How many drives are bad?
- From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
Re: How many drives are bad?
- From: "Norman Elton" <normelton@xxxxxxxxx>
Re: How many drives are bad?
- From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
Re: How many drives are bad?
- From: Norman Elton <normelton@xxxxxxxxx>
Re: How many drives are bad?
- From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
How many drives are bad?
- From: "Norman Elton" <normelton@xxxxxxxxx>
Re: RAID5 to RAID6 reshape?
- From: pg_lxra@xxxxxxxxxxxxxxxxxx (Peter Grandi)
Re: suns raid-z / zfs
- From: Keld Jørn Simonsen <keld@xxxxxxxx>
Re: HDD errors in dmesg, but don't know why...
- From: Jeff Garzik <jeff@xxxxxxxxxx>
Re: HDD errors in dmesg, but don't know why...
- From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
HDD errors in dmesg, but don't know why...
- From: "Steve Fairbairn" <steve@xxxxxxxxxxxxxxxxxxxx>
Re: RAID5 to RAID6 reshape?
- From: Mark Hahn <hahn@xxxxxxxxxxx>
Re: RAID5 to RAID6 reshape?
- From: Janek Kozicki <janek_listy@xxxxx>
Re: RAID5 to RAID6 reshape?
- From: Andre Noll <maan@xxxxxxxxxxxxxxx>
Re: RAID5 to RAID6 reshape?
- From: Beolach <beolach@xxxxxxxxx>
Re: suns raid-z / zfs
- From: Neil Brown <neilb@xxxxxxx>
Re: suns raid-z / zfs
- From: Keld Jørn Simonsen <keld@xxxxxxxx>
Re: RAID5 to RAID6 reshape?
- From: Janek Kozicki <janek_listy@xxxxx>
Re: RAID5 to RAID6 reshape?
- From: "Conway S. Smith" <beolach@xxxxxxxxx>
Re: Create Raid6 with 1 missing member fails
- From: Neil Brown <neilb@xxxxxxx>
Re: suns raid-z / zfs
- From: Neil Brown <neilb@xxxxxxx>
Re: RAID5 to RAID6 reshape?
- From: Neil Brown <neilb@xxxxxxx>
Re: RAID5 to RAID6 reshape?
- From: Neil Brown <neilb@xxxxxxx>
Re: RAID5 to RAID6 reshape?
- From: cat@xxxxxxxxxx
Re: RAID5 to RAID6 reshape?
- From: Janek Kozicki <janek_listy@xxxxx>
Re: RAID5 to RAID6 reshape?
- From: Mark Hahn <hahn@xxxxxxxxxxx>
Re: RAID5 to RAID6 reshape?
- From: "Conway S. Smith" <beolach@xxxxxxxxx>
suns raid-z / zfs
- From: Keld Jørn Simonsen <keld@xxxxxxxx>
Re: RAID5 to RAID6 reshape?
- From: Janek Kozicki <janek_listy@xxxxx>
Create Raid6 with 1 missing member fails
- From: Sevrin Robstad <quackyo@xxxxxxxx>
Re: RAID5 to RAID6 reshape?
- From: Janek Kozicki <janek_listy@xxxxx>
Re: RAID5 to RAID6 reshape?
- From: pg_lxra@xxxxxxxxxxxxxxxxxx (Peter Grandi)
RAID5 to RAID6 reshape?
- From: Beolach <beolach@xxxxxxxxx>
Re: [BUG] OOPS 2.6.24.2 raid5 write with ioatdma
- From: "Shannon Nelson" <shannon.lee.nelson@xxxxxxxxx>
Re: [BUG] OOPS 2.6.24.2 raid5 write with ioatdma
- From: "Dan Williams" <dan.j.williams@xxxxxxxxx>
[BUG] OOPS 2.6.24.2 raid5 write with ioatdma
- From: Laurent CORBES <laurent.corbes@xxxxxxxxxxxx>
Re: 2.6.24-rc6 reproducible raid5 hang
- From: Burkhard Carstens <suse-ml@xxxxxxxxxxxxx>
Re: transferring RAID-1 drives via sneakernet
- From: "Jeff Breidenbach" <jeff@xxxxxxx>
Re: transferring RAID-1 drives via sneakernet
- From: David Greaves <david@xxxxxxxxxxxx>
Re: transferring RAID-1 drives via sneakernet
- From: Michael Tokarev <mjt@xxxxxxxxxx>
Re: Got raid10 assembled wrong - how to fix?
- From: Michael Tokarev <mjt@xxxxxxxxxx>
[BUGREPORT] The kernel thread for md RAID10 could cause a md RAID10 array deadlock
- From: "K.Tanaka" <k-tanaka@xxxxxxxxxxxxx>
Re: transferring RAID-1 drives via sneakernet
- From: "Jeff Breidenbach" <jeff@xxxxxxx>
Re: transferring RAID-1 drives via sneakernet
- From: Brendan Conoboy <blc@xxxxxxxxxx>

[Index of Archives] [Linux RAID Wiki] [ATA RAID] [Linux SCSI Target Infrastructure] [Linux Block] [Linux IDE] [Linux SCSI] [Linux Hams] [Device Mapper] [Kernel] [Linux Admin] [Linux Net] [GFS] [RPM] [git] [Yosemite Forum] [Linux Networking]