On Friday May 9, neilb@xxxxxxx wrote:
> On Thursday May 8, dan.j.williams@xxxxxxxxx wrote:
> > @@ -133,8 +137,10 @@ static linear_conf_t *linear_conf(mddev_t *mddev, int raid_disks)
> >
> > disk->rdev = rdev;
> >
> > + spin_lock(&conf->device_lock);
> > blk_queue_stack_limits(mddev->queue,
> > rdev->bdev->bd_disk->queue);
> > + spin_unlock(&conf->device_lock);
> > /* as we don't honour merge_bvec_fn, we must never risk
> > * violating it, so limit ->max_sector to one PAGE, as
> > * a one page request is never in violation.
>
> This shouldn't be necessary.
> There is no actual race here -- mddev->queue->queue_flags is not going to be
> accessed by anyone else until do_md_run does
> mddev->queue->make_request_fn = mddev->pers->make_request;
> which is much later.
> So we only need to be sure that "queue_is_locked" doesn't complain.
> And as q->queue_lock is still NULL at this point, it won't complain.
Sorry, I got that backwards. It will complain, won't it. :-)
I gotta say that I think it shouldn't. Introducing a spinlock in
linear.c, raid0.c, multipath.c just to silence a "WARN_ON" seems like
the wrong thing to do. Of course we could just use q->__queue_lock so
we don't have to add a new lock, but we still have to take the lock
unnecessarily.
Unfortunately I cannot find a nice solution that both avoids clutter
in md code and also protects against carelessly changing flags without
a proper lock.....
Maybe....
We could get blk_queue_stack_limits to lock the queue, and always
spin_lock_init __queue_lock. Then the only change needed in linear.c
et al would be to set ->queue_lock to &->__queue_lock.
Jens: What do you think of this??
NeilBrown
diff --git a/block/blk-core.c b/block/blk-core.c
index b754a4a..2d31dc2 100644
--- a/block/blk-core.c
+++ b/block/blk-core.c
@@ -479,6 +479,7 @@ struct request_queue *blk_alloc_queue_node(gfp_t gfp_mask, int node_id)
kobject_init(&q->kobj, &blk_queue_ktype);
mutex_init(&q->sysfs_lock);
+ spin_lock_init(&q->__queue_lock);
return q;
}
@@ -541,10 +542,8 @@ blk_init_queue_node(request_fn_proc *rfn, spinlock_t *lock, int node_id)
* if caller didn't supply a lock, they get per-queue locking with
* our embedded lock
*/
- if (!lock) {
- spin_lock_init(&q->__queue_lock);
+ if (!lock)
lock = &q->__queue_lock;
- }
q->request_fn = rfn;
q->prep_rq_fn = NULL;
diff --git a/block/blk-settings.c b/block/blk-settings.c
index bb93d4c..488199a 100644
--- a/block/blk-settings.c
+++ b/block/blk-settings.c
@@ -286,8 +286,14 @@ void blk_queue_stack_limits(struct request_queue *t, struct request_queue *b)
t->max_hw_segments = min(t->max_hw_segments, b->max_hw_segments);
t->max_segment_size = min(t->max_segment_size, b->max_segment_size);
t->hardsect_size = max(t->hardsect_size, b->hardsect_size);
- if (!test_bit(QUEUE_FLAG_CLUSTER, &b->queue_flags))
+ if (!t->queue_lock)
+ WARN_ON_ONCE(1);
+ else if (!test_bit(QUEUE_FLAG_CLUSTER, &b->queue_flags)) {
+ unsigned long flags;
+ spin_lock_irqsave(&t->queue_lock, flags);
queue_flag_clear(QUEUE_FLAG_CLUSTER, t);
+ spin_unlock_irqrestore(&t->queue_lock, flags);
+ }
}
EXPORT_SYMBOL(blk_queue_stack_limits);
diff --git a/drivers/md/linear.c b/drivers/md/linear.c
index 0b85117..552f81b 100644
--- a/drivers/md/linear.c
+++ b/drivers/md/linear.c
@@ -250,6 +250,7 @@ static int linear_run (mddev_t *mddev)
{
linear_conf_t *conf;
+ mddev->queue_lock = &mddev->__queue_lock;
conf = linear_conf(mddev, mddev->raid_disks);
if (!conf)
diff --git a/drivers/md/multipath.c b/drivers/md/multipath.c
index 42ee1a2..90f85e4 100644
--- a/drivers/md/multipath.c
+++ b/drivers/md/multipath.c
@@ -417,6 +417,7 @@ static int multipath_run (mddev_t *mddev)
* bookkeeping area. [whatever we allocate in multipath_run(),
* should be freed in multipath_stop()]
*/
+ mddev->queue_lock = &mddev->__queue_lock;
conf = kzalloc(sizeof(multipath_conf_t), GFP_KERNEL);
mddev->private = conf;
diff --git a/drivers/md/raid0.c b/drivers/md/raid0.c
index 818b482..a179c8f 100644
--- a/drivers/md/raid0.c
+++ b/drivers/md/raid0.c
@@ -280,6 +280,7 @@ static int raid0_run (mddev_t *mddev)
(mddev->chunk_size>>1)-1);
blk_queue_max_sectors(mddev->queue, mddev->chunk_size >> 9);
blk_queue_segment_boundary(mddev->queue, (mddev->chunk_size>>1) - 1);
+ mddev->queue_lock = &mddev->__queue_lock;
conf = kmalloc(sizeof (raid0_conf_t), GFP_KERNEL);
if (!conf)
diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c
index 6778b7c..ac409b7 100644
--- a/drivers/md/raid1.c
+++ b/drivers/md/raid1.c
@@ -1935,6 +1935,9 @@ static int run(mddev_t *mddev)
if (!conf->r1bio_pool)
goto out_no_mem;
+ spin_lock_init(&conf->device_lock);
+ mddev->queue->queue_lock = &conf->device_lock;
+
rdev_for_each(rdev, tmp, mddev) {
disk_idx = rdev->raid_disk;
if (disk_idx >= mddev->raid_disks
@@ -1958,7 +1961,6 @@ static int run(mddev_t *mddev)
}
conf->raid_disks = mddev->raid_disks;
conf->mddev = mddev;
- spin_lock_init(&conf->device_lock);
INIT_LIST_HEAD(&conf->retry_list);
spin_lock_init(&conf->resync_lock);
diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c
index 5938fa9..740f670 100644
--- a/drivers/md/raid10.c
+++ b/drivers/md/raid10.c
@@ -2082,6 +2082,9 @@ static int run(mddev_t *mddev)
goto out_free_conf;
}
+ spin_lock_init(&conf->device_lock);
+ mddev->queue->queue_lock = &mddev->queue->__queue_lock;
+
rdev_for_each(rdev, tmp, mddev) {
disk_idx = rdev->raid_disk;
if (disk_idx >= mddev->raid_disks
@@ -2103,7 +2106,6 @@ static int run(mddev_t *mddev)
disk->head_position = 0;
}
- spin_lock_init(&conf->device_lock);
INIT_LIST_HEAD(&conf->retry_list);
spin_lock_init(&conf->resync_lock);
diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index 087eee0..4fafc79 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -4256,6 +4256,7 @@ static int run(mddev_t *mddev)
goto abort;
}
spin_lock_init(&conf->device_lock);
+ mddev->queue->queue_lock = &conf->device_lock;
init_waitqueue_head(&conf->wait_for_stripe);
init_waitqueue_head(&conf->wait_for_overlap);
INIT_LIST_HEAD(&conf->handle_list);
--
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
