Re: Question: how to identify failing disk in a RAID1

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Maurice Hilarius wrote:
Bill Davidsen wrote:
Maurice Hilarius wrote:
Morning Bill.

BTW< I want to say "Thanks for your help with this" first.
Just in case I forgot.

So, I ran "check" once. It complained, and failed.

Does the failure provide any useful information?

No.
Here is what I got the first time:

root@localhost md]# echo check >sync_action; cat mismatch_cnt
-bash: echo: write error: Device or resource busy
0

Later, on my second try, a few hours later, it worked, reporting no error.
..
[maurice@localhost ~]$ su -
Password:
[root@localhost ~]# cd /sys/block/md0/md
[root@localhost md]# cat /proc/mdstat
Personalities : [raid1] [raid6] [raid5] [raid4]
md0 : active raid1 sda3[0] sdb2[1]
      386403328 blocks [2/2] [UU]

unused devices: <none>
[root@localhost md]# echo check >sync_action; cat mismatch_cnt
0


I think it's time to be keeping a good backup, and hopefully someone else has a good thought on running this down more.

Thanks, updated that backup at the first sign of trouble
Any thoughts on that?

The only thought I have at the moment is marginal power supply, and that's just because it can generate all manner of odd behaviors, rather than any other hints. Sorry.

Yeah. I am going to replace *both* disks, and then run the manufacturers utility (Seatest) on them.
If you aren't getting errors from SMART or logs, and I don't remember you sending me that info, I'm not sure how you determine which drive is the problem.
Exactly.

Thanks a LOT for trying, Bill..

Actually, my though is that you may not actually be getting hardware errors, which is why they are not being report by either the kernel or SMART. That's why I thought of memory and/or power issues, either of which could cause what you are seeing.

Guess I have to leave it there, maybe someone else will have a thought.

--
Bill Davidsen <davidsen@xxxxxxx>
 "Woe unto the statesman who makes war without a reason that will still
be valid when the war is over..." Otto von Bismark

--
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux RAID Wiki]     [ATA RAID]     [Linux SCSI Target Infrastructure]     [Linux Block]     [Linux IDE]     [Linux SCSI]     [Linux Hams]     [Device Mapper]     [Device Mapper Cryptographics]     [Kernel]     [Linux Admin]     [Linux Net]     [GFS]     [RPM]     [git]     [Yosemite Forum]


  Powered by Linux