Re: RAID1 == two different ARRAY in scan, and Q on read error corrected

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Phil Lobbes wrote:

Here's the requested count:

  5 Reallocated_Sector_Ct   0x0033   251   251   063    Pre-fail  Always       -       22

I'm sure David can give a better interpretation, but as I read it, the drive has failed and reallocated 22 sectors and there are 3 more (Current_Pending_Sector) waiting to be reallocated.

I have seen some drives that have reallocated some sectors in a burst and then operated for years without losing any more, but these were the minority.

Usually these counts continue to increase over the short term as the drive fails. If the data is important, I would replace it.

Regards,

Richard
--
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux RAID Wiki]     [ATA RAID]     [Linux SCSI Target Infrastructure]     [Linux Block]     [Linux IDE]     [Linux SCSI]     [Linux Hams]     [Device Mapper]     [Device Mapper Cryptographics]     [Kernel]     [Linux Admin]     [Linux Net]     [GFS]     [RPM]     [git]     [Yosemite Forum]


  Powered by Linux