Re: RAID1 == two different ARRAY in scan, and Q on read error corrected

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



David Lethe wrote:
You can't assume a disk is losing sectors and failing without running
some diagnostics. If you had an improper shutdown (i.e, power loss, not
a crash), and disks were writing, then you can get ECC errors.  That
does not indicate the disk is bad.

The error was:

Apr 18 14:01:45 smartd[2104]: Device: /dev/sdc, 3 Currently unreadable (pending) sectors

These are not ECC errors and the definition I have for pending sector errors is, "Current count of unstable sectors (waiting for remapping)."

It would be useful to see the Reallocated Sectors Count from the smartctl output.

Regards,

Richard
--
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux RAID Wiki]     [ATA RAID]     [Linux SCSI Target Infrastructure]     [Linux Block]     [Linux IDE]     [Linux SCSI]     [Linux Hams]     [Device Mapper]     [Device Mapper Cryptographics]     [Kernel]     [Linux Admin]     [Linux Net]     [GFS]     [RPM]     [git]     [Yosemite Forum]


  Powered by Linux