Problems with IDE Software RAID

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi there,
I'm trying to use md with 9 Seagate 160Gb drives and a 160 Gb partition on a Hitachi drive that also has the operating system on it. I'm using an ASUS A7V600 motherboard and two Promise Ultra-100 TX2 cards.


I'm using the beta of Fedora Core distribution (2.4.22), and I have also tried the 2.6.0-test9 kernels with this distribution.
All of the drives appear to work seperately. The drives also work in RAID configurations of up to 5 drives in any combinations. However using 6 drives and up results in total system lock-up. I run mkraid and about two seconds later the system irretrievebly hangs. I've tried this with RAID 0 and RAID 5.


Has anyone got any ideas about what is wrong? How should I go about debugging this?

Do you think this might be related to bugzilla bug id #956 on the bugzilla? http://bugzilla.kernel.org/show_bug.cgi?id=956

Hoping someone can help,

David

-
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux RAID Wiki]     [ATA RAID]     [Linux SCSI Target Infrastructure]     [Linux Block]     [Linux IDE]     [Linux SCSI]     [Linux Hams]     [Device Mapper]     [Device Mapper Cryptographics]     [Kernel]     [Linux Admin]     [Linux Net]     [GFS]     [RPM]     [git]     [Yosemite Forum]


  Powered by Linux