Linux RAID Storage Date Index
![](array.png)
[Prev Page][Next Page]
- Re: How safe is software RAID compared to how safe hardware RAID is!?
- From: Frank Smith <fsmith@xxxxxxxxxxx>
- Re: How safe is software RAID compared to how safe hardware RAID is!?
- From: Kourosh <linux-raid@xxxxxxxxxxxxxxxxxxx>
- Re: How safe is software RAID compared to how safe hardware RAID is!?
- From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
- How safe is software RAID compared to how safe hardware RAID is!?
- From: "James R Bamford" <jim@xxxxxxxxxxxxx>
- Re: HELP.. how to remove a spare drive i accidently added
- From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
- HELP.. how to remove a spare drive i accidently added
- From: "James R Bamford" <jim@xxxxxxxxxxxxx>
- Re: recommended sata controllers?
- From: Andrew Hogue <hogue@xxxxxxxxxxx>
- recommended sata controllers?
- From: Mark Hahn <hahn@xxxxxxxxxxxxxxxxxxx>
- RE: Software Raid 1 data corruptions..
- From: "James R Bamford" <jim@xxxxxxxxxxxxx>
- RE: Software Raid 1 data corruptions..
- From: "Michael" <michael@xxxxxxxxxxxxxxxxxxx>
- RE: Software Raid 1 data corruptions..
- From: "James R Bamford" <jim@xxxxxxxxxxxxx>
- Re: how to which to bigger disk (md can do it?)
- From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
- Re: how to which to bigger disk (md can do it?)
- From: Luca Berra <bluca@xxxxxxxxxx>
- Re: how to which to bigger disk (md can do it?)
- From: Farkas Levente <lfarkas@xxxxxxx>
- Re: how to which to bigger disk (md can do it?)
- From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
- Re: how to which to bigger disk (md can do it?)
- From: Luca Berra <bluca@xxxxxxxxxx>
- Re: Linux RAID metadata format docs?
- From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
- Re: 15% used but "No space left on Device"
- From: Dan Egli <dan@xxxxxxxxxxxxxxxxxxxxxxx>
- RE: Software Raid 1 data corruptions..
- From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
- Adaptec 1200A & Asus P2L97
- Automatic Write Reallocation Enable, question?
- From: "Guy" <bugzilla@xxxxxxxxxxxxxxxx>
- Re: 15% used but "No space left on Device"
- From: Andrew Hogue <hogue@xxxxxxxxxxx>
- RE: Software Raid 1 data corruptions..
- From: "James R Bamford" <jim@xxxxxxxxxxxxx>
- 15% used but "No space left on Device"
- From: Andrew Hogue <hogue@xxxxxxxxxxx>
- Re: how to which to bigger disk (md can do it?)
- From: Maurice Hilarius <maurice@xxxxxxxxxxxx>
- Re: how to which to bigger disk (md can do it?)
- From: Farkas Levente <lfarkas@xxxxxxx>
- RE: Software Raid 1 data corruptions..
- From: "James R Bamford" <jim@xxxxxxxxxxxxx>
- Re: how to which to bigger disk (md can do it?)
- From: Hendrik Visage <hvisage@xxxxxxxxxxxxxx>
- how to which to bigger disk (md can do it?)
- From: Farkas Levente <lfarkas@xxxxxxx>
- RE: Software Raid 1 data corruptions..
- From: "James R Bamford" <jim@xxxxxxxxxxxxx>
- RE: Software Raid 1 data corruptions..
- From: "James R Bamford" <jim@xxxxxxxxxxxxx>
- RE: Software Raid 1 data corruptions..
- From: "James R Bamford" <jim@xxxxxxxxxxxxx>
- Software Raid 1 data corruptions..
- From: "James R Bamford" <jim@xxxxxxxxxxxxx>
- Re: [RFCI] How best to partition MD/raid devices in 2.6
- From: viro@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
- Re: Linux RAID metadata format docs?
- From: Hendrik Visage <hvisage@xxxxxxxxxxxxxx>
- Re: [RFCI] How best to partition MD/raid devices in 2.6
- From: Matt Domsch <Matt_Domsch@xxxxxxxx>
- Re: Linux RAID metadata format docs?
- From: Jeff Garzik <jgarzik@xxxxxxxxx>
- Re: Linux RAID metadata format docs?
- From: Matti Aarnio <matti.aarnio@xxxxxxxxxxx>
- Linux RAID metadata format docs?
- From: Jeff Garzik <jgarzik@xxxxxxxxx>
- Re: [RFCI] How best to partition MD/raid devices in 2.6
- From: Jeff Garzik <jgarzik@xxxxxxxxx>
- Re: [RFCI] How best to partition MD/raid devices in 2.6
- From: Lars Marowsky-Bree <lmb@xxxxxxx>
- Re: [RFCI] How best to partition MD/raid devices in 2.6
- From: Paul Jakma <paul@xxxxxxxx>
- Re: [RFCI] How best to partition MD/raid devices in 2.6
- From: Luca Berra <bluca@xxxxxxxxxx>
- Re: [RFCI] How best to partition MD/raid devices in 2.6
- From: viro@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
- Re: [RFCI] How best to partition MD/raid devices in 2.6
- From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
- Re: [RFCI] How best to partition MD/raid devices in 2.6
- From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
- Re: [RFCI] How best to partition MD/raid devices in 2.6
- From: Daniel Gryniewicz <dang@xxxxxxxxxxx>
- Re: [RFCI] How best to partition MD/raid devices in 2.6
- From: Daniel Pittman <daniel@xxxxxxxxxxxx>
- Re: [RFCI] How best to partition MD/raid devices in 2.6
- From: viro@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
- [RFCI] How best to partition MD/raid devices in 2.6
- From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
- Re: force spare to sync
- From: "Michael" <michael@xxxxxxxxxxxxxxxxxxx>
- Re: force spare to sync
- From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
- Re: [patch] raidstart problem - weakness or bug
- From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
- Re: 14 disks for RAID 5 question
- From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
- [patch] raidstart problem - weakness or bug
- From: Roger Gammans <roger@xxxxxxxxxxxxxxxxxxxxxx>
- Re: force spare to sync
- From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
- 14 disks for RAID 5 question
- From: bugzilla@xxxxxxxxxxxxxxxx
- force spare to sync
- From: "Michael" <michael@xxxxxxxxxxxxxxxxxxx>
- Re: Moving RAID 1 array to new server
- From: Jean-Rene Cormier <jean-rene.cormier@xxxxxxxxx>
- Re: Moving RAID 1 array to new server
- From: Jean-Rene Cormier <jean-rene.cormier@xxxxxxxxx>
- Re: Moving RAID 1 array to new server
- From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
- Re: Moving RAID 1 array to new server
- From: Jean-Rene Cormier <jean-rene.cormier@xxxxxxxxx>
- Re: Moving RAID 1 array to new server
- From: Juri Haberland <list-linux.raid@xxxxxxxxxxx>
- Re: Moving RAID 1 array to new server
- From: Jean-Rene Cormier <jean-rene.cormier@xxxxxxxxx>
- Re: Moving RAID 1 array to new server
- From: Juri Haberland <list-linux.raid@xxxxxxxxxxx>
- Re: Moving RAID 1 array to new server
- From: spam@xxxxxxxxx (Dick Streefland)
- Read error causes a drive to go off-line
- From: bugzilla@xxxxxxxxxxxxxxxx
- Re: Moving RAID 1 array to new server
- From: Jean-Rene Cormier <jean-rene.cormier@xxxxxxxxx>
- Re: Moving RAID 1 array to new server
- From: Juri Haberland <list-linux.raid@xxxxxxxxxxx>
- Moving RAID 1 array to new server
- From: Jean-Rene Cormier <jrc@xxxxxxxxxx>
- Re: Bug in kernel 2.2.14
- From: Jose Luis Domingo Lopez <linux-raid@xxxxxxxxxxxxx>
- Bug in kernel 2.2.14
- From: "Tomas Vondra" <wondra@xxxxxxxx>
- Re: ITE IT 8212 problem
- From: Ruth Ivimey-Cook <Ruth.Ivimey-Cook@xxxxxxxxxx>
- ITE IT 8212 problem
- From: Monda.Laszlo@xxxxxxxxxxxxxxxx
- PCD&PCBN tools
- From: "zqcx" <z_q_c_x@xxxxxxx>
- Re: invalud argument when replacing disk of raid 5 set
- From: Juri Haberland <list-linux.raid@xxxxxxxxxxx>
- Re: invalud argument when replacing disk of raid 5 set
- From: Dan Egli <dan@xxxxxxxxxxxxxxxxxxxxxxx>
- Re: invalud argument when replacing disk of raid 5 set
- From: Juri Haberland <list-linux.raid@xxxxxxxxxxx>
- invalud argument when replacing disk of raid 5 set
- From: Dan Egli <dan@xxxxxxxxxxxxxxxxxxxxxxx>
- Re: Problems with IDE Software RAID
- From: David J Craigon <david@xxxxxxxxxxxxxxxx>
- Software RAID level performance
- From: "3tcdgwg3" <3tcdgwg3@xxxxxxxxxxx>
- Re: scsi raid controller in debian
- From: Jan-Benedict Glaw <jbglaw@xxxxxxxxxx>
- scsi raid controller in debian
- From: RSABROSO <RSABROSO@xxxxxxxxxxx>
- OT Ramblings about a bugzilla report: was Re: Problems with IDE Software RAID
- From: Mike Dresser <mdresser_l@xxxxxxxxxxxxxxxxxx>
- Problems with IDE Software RAID
- From: David J Craigon <david@xxxxxxxxxxxxxxxx>
- [PATCH] md - fix return code in set_disk_faulty()
- From: Mike Tran <mhtran@xxxxxxxxxx>
- Drives labeled as faulty by mdadm but are present
- From: AndyLiebman@xxxxxxx
- Dunya Turuna Karavan Arkadaþý/Looking for a Caravan Mate For travel
- From: "KaravnalaDünyaTuru/TourByCaravan" <evileye@xxxxxxxx>
- Re: many ide drives, raid0/raid5
- From: Mike Tran <mhtran@xxxxxxxxxx>
- Re: lock failure when creating raid on 2.6.0-test9
- From: Wichert Akkerman <wichert@xxxxxxxxx>
- lock failure when creating raid on 2.6.0-test9
- From: Wichert Akkerman <wichert@xxxxxxxxx>
- 15 ide driver, raid0 / raid5
- From: Florian Reitmeir <fr@xxxxxxxxx>
- many ide drives, raid0/raid5
- From: Florian Reitmeir <squat@xxxxxxxx>
- Re: Booting from a raid1 device ?
- From: "Bill Rugolsky Jr." <brugolsky@xxxxxxxxxxxxxxxxxxxxxxxxx>
- Re: RAID 10 and Persistent Superblock
- From: "Rechenberg, Andrew" <ARechenberg@xxxxxxxxxxxxxxxxxxxxxxxxx>
- Segmentation Fault on Raidstop
- From: AndyLiebman@xxxxxxx
- RAID 10 and Persistent Superblock
- From: AndyLiebman@xxxxxxx
- Re: Booting from a raid1 device ?
- From: "Eric Wood" <eric@xxxxxxxxxxxxx>
- Re: announce: tiny raidtools-alike for use e.g. in initrd
- From: Luca Berra <bluca@xxxxxxxxxx>
- Re: announce: tiny raidtools-alike for use e.g. in initrd
- From: Luca Berra <bluca@xxxxxxxxxx>
- Re: Booting from a raid1 device ?
- From: Luca Berra <bluca@xxxxxxxxxx>
- Re: ANNOUNCE: User-space System Device Enumation (uSDE)
- From: "Dave Dodge" <dododge@xxxxxxxxx>
- Re: ANNOUNCE: User-space System Device Enumation (uSDE)
- From: Greg KH <greg@xxxxxxxxx>
- Re: ANNOUNCE: User-space System Device Enumation (uSDE)
- From: David Dodge <dododge@xxxxxxxxx>
- Re: mdadm --assemble --scan hassles....
- From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
- RE: Booting from a raid1 device ?
- From: "Cress, Andrew R" <andrew.r.cress@xxxxxxxxx>
- Re: Booting from a raid1 device ?
- From: Michael Tokarev <mjt@xxxxxxxxxx>
- RE: Booting from a raid1 device ?
- From: "Cress, Andrew R" <andrew.r.cress@xxxxxxxxx>
- Re: new problem has developed
- From: maarten van den Berg <maarten@xxxxxxx>
- Re: Booting from a raid1 device ?
- From: Lars Marowsky-Bree <lmb@xxxxxxx>
- announce: tiny raidtools-alike for use e.g. in initrd
- From: Michael Tokarev <mjt@xxxxxxxxxx>
- Re: mdadm --assemble --scan hassles....
- From: Hendrik Visage <hvisage@xxxxxxxxxxxxxx>
- Re: mdadm --assemble --scan hassles....
- From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
- Re: [cgl_discussion] Re: ANNOUNCE: User-space System Device Enumation (uSDE)
- From: Greg KH <greg@xxxxxxxxx>
- Re: Booting from a raid1 device ?
- From: Michael Tokarev <mjt@xxxxxxxxxx>
- Re: [cgl_discussion] Re: ANNOUNCE: User-space System Device Enumation (uSDE)
- From: Rusty Lynch <rusty@xxxxxxxxxxxxxxxxxx>
- Re: [cgl_discussion] RE: ANNOUNCE: User-space System Device Enumation (uSDE)
- From: Greg KH <greg@xxxxxxxxx>
- Re: ANNOUNCE: User-space System Device Enumation (uSDE)
- From: Greg KH <greg@xxxxxxxxx>
- MDADM Guru Needed
- From: AndyLiebman@xxxxxxx
- Re: [cgl_discussion] RE: ANNOUNCE: User-space System Device Enumation (uSDE)
- From: Eric.Chacron@xxxxxxxxxx
- RE: ANNOUNCE: User-space System Device Enumation (uSDE)
- From: Steven Dake <sdake@xxxxxxxxxx>
- RE: Booting from a raid1 device ?
- From: "Cress, Andrew R" <andrew.r.cress@xxxxxxxxx>
- Re: mdadm --assemble --scan hassles....
- From: Hendrik Visage <hvisage@xxxxxxxxxxxxxx>
- RE: ANNOUNCE: User-space System Device Enumation (uSDE)
- From: "Guo, Min" <min.guo@xxxxxxxxx>
- Re: I'm about ready to do SW-Raid5 - pointers needed
- From: Maurice Hilarius <maurice@xxxxxxxxxxxx>
- Re: mdadm --assemble --scan hassles....
- From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
- ANNOUNCE: mdadm 1.4.0 - A tools for managing Soft RAID under Linux
- From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
- Re: ANNOUNCE: User-space System Device Enumation (uSDE)
- From: Greg KH <greg@xxxxxxxxx>
- Re: Booting from a raid1 device ?
- From: Sandro Dentella <sandro.dentella@xxxxxx>
- reconstruction -- where is the upper bound?
- From: mjstumpf <mjstumpf@xxxxxxxxx>
- Re: reconstruction -- where is the upper bound?
- From: seth vidal <skvidal@xxxxxxxxxxxx>
- Re: I'm about ready to do SW-Raid5 - pointers needed
- From: maarten van den Berg <maarten@xxxxxxx>
- Re: I'm about ready to do SW-Raid5 - pointers needed
- From: Gordon Henderson <gordon@xxxxxxxxxx>
- Re: I'm about ready to do SW-Raid5 - pointers needed
- Re: ANNOUNCE: User-space System Device Enumation (uSDE)
- From: Steven Dake <sdake@xxxxxxxxxx>
- Re: I'm about ready to do SW-Raid5 - pointers needed
- From: Gordon Henderson <gordon@xxxxxxxxxx>
- Re: I'm about ready to do SW-Raid5 - pointers needed
- From: Norman Schmidt <norman.schmidt@xxxxxxxxxxxxxxxxxxxxxxxxxx>
- Re: Booting from a raid1 device ?
- From: "Michael" <michael@xxxxxxxxxxxxxxxxxxx>
- Re: AW: RAID1 VS RAID5
- From: Mario Giammarco <mgiammarco@xxxxxxxxxxx>
- Re: I'm about ready to do SW-Raid5 - pointers needed
- From: Gordon Henderson <gordon@xxxxxxxxxx>
- Re: I'm about ready to do SW-Raid5 - pointers needed
- From: maarten van den Berg <maarten@xxxxxxx>
- Re: I'm about ready to do SW-Raid5 - pointers needed
- From: Gordon Henderson <gordon@xxxxxxxxxx>
- Re: I'm about ready to do SW-Raid5 - pointers needed
- From: maarten van den Berg <maarten@xxxxxxx>
- Re: mdadm --assemble --scan hassles....
- From: rob <rob@xxxxxxxxxxxxxxxxx>
- Re: Booting from a raid1 device ?
- From: Lars Marowsky-Bree <lmb@xxxxxxx>
- Re: ANNOUNCE: User-space System Device Enumation (uSDE)
- From: Lars Marowsky-Bree <lmb@xxxxxxx>
- AW: RAID1 VS RAID5
- From: "Martin Bene" <martin.bene@xxxxxxxxxxxxx>
- Re: RAID1 VS RAID5
- From: Mario Giammarco <mgiammarco@xxxxxxxxxxx>
- Re: RAID1 VS RAID5
- From: Mario Giammarco <mgiammarco@xxxxxxxxxxx>
- Re: RAID1 VS RAID5
- From: Mario Giammarco <mgiammarco@xxxxxxxxxxx>
- Re: I'm about ready to do SW-Raid5 - pointers needed
- From: Hermann Himmelbauer <dusty@xxxxxxxxxxxxxxxxxxxx>
- Re: I'm about ready to do SW-Raid5 - pointers needed
- From: Gordon Henderson <gordon@xxxxxxxxxx>
- Re: I'm about ready to do SW-Raid5 - pointers needed
- From: Hermann Himmelbauer <dusty@xxxxxxxxxxxxxxxxxxxx>
- Spinning down disks [Re: I'm about ready to do SW-Raid5 - pointers needed]
- From: Gordon Henderson <gordon@xxxxxxxxxx>
- Re: mdadm --assemble --scan hassles....
- From: Hendrik Visage <hvisage@xxxxxxxxxxxxxx>
- Re: I'm about ready to do SW-Raid5 - pointers needed
- From: Luke Rosenthal <luke@xxxxxxxx>
- Re: I'm about ready to do SW-Raid5 - pointers needed
- From: rob <rob@xxxxxxxxxxxxxxxxx>
- Re: I'm about ready to do SW-Raid5 - pointers needed
- From: David Anderson <david.anderson@xxxxxxxxxx>
- Re: I'm about ready to do SW-Raid5 - pointers needed
- From: maarten van den Berg <maarten@xxxxxxx>
- Re: I'm about ready to do SW-Raid5 - pointers needed
- From: David Anderson <david.anderson@xxxxxxxxxx>
- Re: I'm about ready to do SW-Raid5 - pointers needed
- From: maarten van den Berg <maarten@xxxxxxx>
- Re: I'm about ready to do SW-Raid5 - pointers needed
- From: David Anderson <david.anderson@xxxxxxxxxx>
- Re: I'm about ready to do SW-Raid5 - pointers needed
- From: maarten van den Berg <maarten@xxxxxxx>
- Re: mdadm --assemble --scan hassles....
- From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
- Re: I'm about ready to do SW-Raid5 - pointers needed
- From: David Anderson <david.anderson@xxxxxxxxxx>
- Boot+Root+Raid+Lilo howto
- From: "Michael" <michael@xxxxxxxxxxxxxxxxxxx>
- I'm about ready to do SW-Raid5 - pointers needed
- From: berk walker <berk.walker@xxxxxxxxxxx>
- Re: ANNOUNCE: User-space System Device Enumation (uSDE)
- From: Steven Dake <sdake@xxxxxxxxxx>
- Re: ANNOUNCE: User-space System Device Enumation (uSDE)
- From: Mark Bellon <mbellon@xxxxxxxxxx>
- Re: Booting from a raid1 device ?
- From: maarten van den Berg <maarten@xxxxxxx>
- Re: Booting from a raid1 device ?
- From: Hermann Himmelbauer <dusty@xxxxxxxxxxxxxxxxxxxx>
- RE: Booting from a raid1 device ?
- From: "Cress, Andrew R" <andrew.r.cress@xxxxxxxxx>
- Re: ANNOUNCE: User-space System Device Enumation (uSDE)
- From: Mark Bellon <mbellon@xxxxxxxxxx>
- Re: ANNOUNCE: User-space System Device Enumation (uSDE)
- From: Lars Marowsky-Bree <lmb@xxxxxxx>
- ANNOUNCE: User-space System Device Enumation (uSDE)
- From: Mark Bellon <mbellon@xxxxxxxxxx>
- Re: Booting from a raid1 device ?
- From: Paul Clements <Paul.Clements@xxxxxxxxxxxx>
- Re: RAID1 VS RAID5
- From: "Andrew Herdman" <andrew@xxxxxxxxx>
- Re: Booting from a raid1 device ?
- From: Gordon Henderson <gordon@xxxxxxxxxx>
- Re: RAID1 VS RAID5
- From: Hermann Himmelbauer <dusty@xxxxxxxxxxxxxxxxxxxx>
- Booting from a raid1 device ?
- From: Don Jessup <donj@xxxxxxxxx>
- Re: RAID1 VS RAID5
- From: Lars Marowsky-Bree <lmb@xxxxxxx>
- Re: RAID1 VS RAID5
- From: Gordon Henderson <gordon@xxxxxxxxxx>
- Re: dean's linux raid wishlist
- From: "Bill Rugolsky Jr." <brugolsky@xxxxxxxxxxxxxxxxxxxxxxxxx>
- Re: RAID1 VS RAID5
- From: Jeff Woods <kazrak+kernel@xxxxxxxxxxx>
- Re: RAID1 VS RAID5
- From: maarten van den Berg <maarten@xxxxxxx>
- Re: RAID1 VS RAID5
- From: Hermann Himmelbauer <dusty@xxxxxxxxxxxxxxxxxxxx>
- Re: RAID1 VS RAID5
- From: Jeff Woods <kazrak+kernel@xxxxxxxxxxx>
- Re: RAID1 VS RAID5
- From: Lars Marowsky-Bree <lmb@xxxxxxx>
- Re: RAID1 VS RAID5
- From: Gordon Henderson <gordon@xxxxxxxxxx>
- Re: RAID1 VS RAID5
- From: Hermann Himmelbauer <dusty@xxxxxxxxxxxxxxxxxxxx>
- Re: RAID1 VS RAID5
- From: Hermann Himmelbauer <dusty@xxxxxxxxxxxxxxxxxxxx>
- dean's linux raid wishlist
- From: dean gaudet <dean-list-linux-raid@xxxxxxxxxx>
- Re: recovery of hosed raid5 array
- From: dean gaudet <dean-list-linux-raid@xxxxxxxxxx>
- Re: RAID1 recovery fails with 2.6 kernel
- From: spam@xxxxxxxxxxxxxxxxxxxx (Dick Streefland)
- new problem has developed
- From: maarten van den Berg <maarten@xxxxxxx>
- Re: recovery of hosed raid5 array
- From: Jason Lunz <lunz@xxxxxxxxxxxx>
- Re: recovery of hosed raid5 array
- From: Mike Fedyk <mfedyk@xxxxxxxxxxxxx>
- Re: RAID1 VS RAID5
- From: Mario Giammarco <mgiammarco@xxxxxxxxxxx>
- Re: RAID1 VS RAID5
- From: Matti Aarnio <matti.aarnio@xxxxxxxxxxx>
- Re: RAID1 VS RAID5
- From: maarten van den Berg <maarten@xxxxxxx>
- RAID1 VS RAID5
- From: Mario Giammarco <mgiammarco@xxxxxxxxxxx>
- RAID1 VS RAID5
- From: Mario Giammarco <mgiammarco@xxxxxxxxxxx>
- Re: mdadm --assemble --scan hassles....
- From: Hendrik Visage <hvisage@xxxxxxxxxxxxxx>
- Re: Making RAIDS with firewire drives -- changing device IDs.
- From: seth vidal <skvidal@xxxxxxxxxxxx>
- Making RAIDS with firewire drives -- changing device IDs.
- From: AndyLiebman@xxxxxxx
- Re: AW: two-disk-failure question
- From: maarten van den Berg <maarten@xxxxxxx>
- Re: Resync Question
- From: Paul Clements <Paul.Clements@xxxxxxxxxxxx>
- Resync Question
- From: Don Jessup <donj@xxxxxxxxx>
- Resync Question
- From: Don Jessup <donj@xxxxxxxxx>
- Kernel OOps: bad magic 0 while RAID5 resync operation
- From: "Bo Moon" <bo@xxxxxxxxxxxxxxxxxxxxxx>
- Re: RAID1 recovery fails with 2.6 kernel
- From: spam@xxxxxxxxxxxxxxxxxxxx (Dick Streefland)
- Re: RAID1 recovery fails with 2.6 kernel
- From: Mike Tran <mhtran@xxxxxxxxxx>
- Re: two-disk-failure question
- From: "Ryan B. Lynch" <rlynch@xxxxxxxxxxxx>
- Re: Consensus on controllers?
- From: Hermann Himmelbauer <dusty@xxxxxxxxxxxxxxxxxxxx>
- Consensus on controllers?
- From: Bob Hillegas <bobhillegas@xxxxxxxxxxxxxx>
- Re: scsi card recommendations
- From: "Michael" <michael@xxxxxxxxxxxxxxxxxxx>
- resyncing
- From: Scott Kopel <skopel@xxxxxxxxxxxxxxx>
- Re: Help resyncing/remounting raid5 array please
- From: Paul Clements <Paul.Clements@xxxxxxxxxxxx>
- Help resyncing/remounting raid5 array please
- From: "Ruth Ivimey-Cook" <Ruth.Ivimey-Cook@xxxxxxxxxx>
- Re: scsi card recommendations
- From: Hermann Himmelbauer <dusty@xxxxxxxxxxxxxxxxxxxx>
- ataraid in 2.6?
- From: Mental Patient <mental@xxxxxxxxxxxxxx>
- Re: scsi card recommendations
- Re: scsi card recommendations
- From: rob <rob@xxxxxxxxxxxxxxxxx>
- scsi card recommendations
- From: "Michael" <michael@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] md - Use sector rather than block numbers when splitting raid0 requests.
- From: Andy Polyakov <appro@xxxxxxxxxxxxxx>
- Re: RAID1 recovery fails with 2.6 kernel
- From: spam@xxxxxxxxx (Dick Streefland)
- Re: RAID1 recovery fails with 2.6 kernel
- From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
- [PATCH] md - Use sector rather than block numbers when splitting raid0 requests.
- From: NeilBrown <neilb@xxxxxxxxxxxxxxx>
- RAID1 recovery fails with 2.6 kernel
- From: spam@xxxxxxxxxxxxxxxxxxxx (Dick Streefland)
- chunk size.
- From: jshankar <jshankar@xxxxxxxxxxxxxxxx>
- Re: Which drives below to which controller?...clarified
- From: "jeff millar" <wa1hco@xxxxxxxxxxxx>
- AW: two-disk-failure question
- From: "Martin Bene" <martin.bene@xxxxxxxxxxxxx>
- Which drives below to which controller?
- From: "jeff millar" <wa1hco@xxxxxxxxxxxx>
- two-disk-failure question
- From: maarten van den Berg <maarten@xxxxxxx>
- subsecond RAID 1 failover using SCSI targets
- From: Steven Dake <sdake@xxxxxxxxxx>
- Raid5 Poor Permformance
- From: Don Jessup <donj@xxxxxxxxx>
- Re: recovery question?
- From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
- Re: speed_limit_min probs, thoughts
- From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
- Re: mdadm --assemble --scan hassles....
- From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
- Re: possible to use 1 drive as hot failover for 2 raid1's?
- From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
- RE: raid0 and iscsi
- From: jshankar <jshankar@xxxxxxxxxxxxxxxx>
- Re: swap on raid 1
- From: Thomas Steudten <alpha@xxxxxxxxxxxx>
- Re: swap on raid 1
- From: Gordon Henderson <gordon@xxxxxxxxxx>
- Re: swap on raid 1
- From: Hermann Himmelbauer <dusty@xxxxxxxxxxxxxxxxxxxx>
- Re: 3ware 7500-8 on 32 & 64 bit PCi
- From: Joshua Baker-LePain <jlb17@xxxxxxxx>
- 3ware 7500-8 on 32 & 64 bit PCi
- From: Farkas Levente <lfarkas@xxxxxxx>
- Re: swap on raid 1
- From: Gordon Henderson <gordon@xxxxxxxxxx>
- swap on raid 1
- From: skopel@xxxxxxxxxxxxxxx
- Re: Driver for BIOS-based software RAIDs
- From: Lars Marowsky-Bree <lmb@xxxxxxx>
- Re: raid1 critical sections not protected in 2.4.x?
- From: Lars Marowsky-Bree <lmb@xxxxxxx>
- Re: Antwort: Re: Swap on RAID1?
- From: Hermann Himmelbauer <dusty@xxxxxxxxxxxxxxxxxxxx>
- Antwort: Re: Swap on RAID1?
- From: alexander.weber@xxxxxx
- Re: 4*300GB SW-RAID5 - bad idea?
- From: Gordon Henderson <gordon@xxxxxxxxxx>
- Re: Swap on RAID1?
- From: Gordon Henderson <gordon@xxxxxxxxxx>
- Re: raid0 and iscsi
- From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
- Re: raid0 and iscsi
- From: rob <rob@xxxxxxxxxxxxxxxxx>
- Re: missing superblock on RAID5
- From: rob <rob@xxxxxxxxxxxxxxxxx>
- Re: Linux drivers for ICH5R (RAID1) and Promise PDC20378, Performance
- From: rob <rob@xxxxxxxxxxxxxxxxx>
- Re: missing superblock on RAID5
- From: Victor <linux-raid@xxxxxxxxx>
- Re: raid0 and iscsi
- From: rob <rob@xxxxxxxxxxxxxxxxx>
- Re: Swap on RAID1?
- From: Paul Clements <Paul.Clements@xxxxxxxxxxxx>
- Re: missing superblock on RAID5
- From: rob <rob@xxxxxxxxxxxxxxxxx>
- Re: Swap on RAID1?
- From: Matti Aarnio <matti.aarnio@xxxxxxxxxxx>
- Re: 4*300GB SW-RAID5 - bad idea?
- From: Matt Simonsen <matt_lists@xxxxxxxxxxxxxx>
- Re: Linux drivers for ICH5R (RAID1) and Promise PDC20378, Performance
- From: Hermann Himmelbauer <dusty@xxxxxxxxxxxxxxxxxxxx>
- RE: raid0 and iscsi
- From: jshankar <jshankar@xxxxxxxxxxxxxxxx>
- 4*300GB SW-RAID5 - bad idea?
- From: Hermann Himmelbauer <dusty@xxxxxxxxxxxxxxxxxxxx>
- Re: Swap on RAID1?
- From: Thomas Horsten <thomas@xxxxxxxxxxx>
- Re: Linux drivers for ICH5R (RAID1) and Promise PDC20378, Performance
- From: Steven Dake <sdake@xxxxxxxxxx>
- Swap on RAID1?
- From: Hermann Himmelbauer <dusty@xxxxxxxxxxxxxxxxxxxx>
- Linux drivers for ICH5R (RAID1) and Promise PDC20378, Performance
- From: Hermann Himmelbauer <dusty@xxxxxxxxxxxxxxxxxxxx>
- Re: Driver for BIOS-based software RAIDs
- From: Thomas Horsten <thomas@xxxxxxxxxxx>
- Re: raid1 critical sections not protected in 2.4.x?
- From: Steven Dake <sdake@xxxxxxxxxx>
- Re: Driver for BIOS-based software RAIDs
- From: Lars Marowsky-Bree <lmb@xxxxxxx>
- Re: missing superblock on RAID5
- From: Victor <linux-raid@xxxxxxxxx>
- Re: missing superblock on RAID5
- From: rob <rob@xxxxxxxxxxxxxxxxx>
- Re: Driver for BIOS-based software RAIDs
- From: Thomas Horsten <thomas@xxxxxxxxxxx>
- Re: Driver for BIOS-based software RAIDs
- From: Thomas Horsten <thomas@xxxxxxxxxxx>
- Re: Driver for BIOS-based software RAIDs
- From: Lars Marowsky-Bree <lmb@xxxxxxx>
- Re: Driver for BIOS-based software RAIDs
- From: "Kevin P. Fleming" <kpfleming@xxxxxxxxxxxxxxxxxxxx>
- Driver for BIOS-based software RAIDs
- From: Thomas Horsten <thomas@xxxxxxxxxxx>
- Re: missing superblock on RAID5
- From: Victor <linux-raid@xxxxxxxxx>
- Re: recovery of hosed raid5 array
- From: dean gaudet <dean-list-linux-raid@xxxxxxxxxx>
- missing superblock on RAID5
- From: Victor <linux-raid@xxxxxxxxx>
- recovery question?
- From: Scott Kopel <skopel@xxxxxxxxxxxxxxx>
- Re: recovery of hosed raid5 array
- From: Dragan Simic <dsimic@xxxxxxxxxxxx>
- Re: raid0 and iscsi
- From: rob <rob@xxxxxxxxxxxxxxxxx>
- raid0 and iscsi
- From: Jayshankar Nair <jshankar@xxxxxxxxxxxxxxxx>
- Re: raid resync
- From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
- Re: recovery of hosed raid5 array
- From: dean gaudet <dean-list-linux-raid@xxxxxxxxxx>
- Re: recovery of hosed raid5 array
- From: Jason Lunz <lunz@xxxxxxxxxxxx>
- Re: recovery of hosed raid5 array
- From: dean gaudet <dean-list-linux-raid@xxxxxxxxxx>
- speed_limit_min probs, thoughts
- From: Duke Ionescu <duke@xxxxxxxxxx>
- Re: recovery of hosed raid5 array
- From: Jason Lunz <lunz@xxxxxxxxxxxx>
- Re: recovery of hosed raid5 array
- From: rob <rob@xxxxxxxxxxxxxxxxx>
- Re: recovery of hosed raid5 array
- recovery of hosed raid5 array
- From: Jason Lunz <lunz@xxxxxxxxxxxx>
- Re: raid1 critical sections not protected in 2.4.x?
- From: Lars Marowsky-Bree <lmb@xxxxxxx>
- Re: raid0 + raid1 question
- From: "Kevin P. Fleming" <kpfleming@xxxxxxxxxxxxxxxxxxxx>
- interesting md problem
- From: Maurice Hilarius <maurice@xxxxxxxxxxxx>
- Re: raid0 + raid1 question
- From: anthony mayes <anmayes@xxxxxxxx>
- Re: raid0 + raid1 question
- From: "Rechenberg, Andrew" <ARechenberg@xxxxxxxxxxxxxxxxxxxxxxxxx>
- raid1 critical sections not protected in 2.4.x?
- From: Steven Dake <sdake@xxxxxxxxxx>
- Re: RAID1-Device won't survive reboot
- From: rob <rob@xxxxxxxxxxxxxxxxx>
- Antwort: Re: RAID1-Device won't survive reboot
- From: alexander.weber@xxxxxx
- Re: RAID1-Device won't survive reboot
- From: Thomas Steudten <alpha@xxxxxxxxxxxx>
- Re: raid0 + raid1 question
- From: Lars Marowsky-Bree <lmb@xxxxxxx>
- Re: RAID1-Device won't survive reboot
- From: rob <rob@xxxxxxxxxxxxxxxxx>
- raid resync
- From: "Bo Moon" <bo@xxxxxxxxxxxxxxxxxxxxxx>
- raid0 + raid1 question
- From: anthony mayes <anmayes@xxxxxxxx>
- RAID1-Device won't survive reboot
- From: alexander.weber@xxxxxx
- mdadm --assemble --scan hassles....
- From: Hendrik Visage <hvisage@xxxxxxxxxxxxxx>
- Re: possible to use 1 drive as hot failover for 2 raid1's?
- From: Luca Berra <bluca@xxxxxxxxxx>
- Re: possible to use 1 drive as hot failover for 2 raid1's?
- From: Holger Kiehl <Holger.Kiehl@xxxxxx>
- Re: mounting /dev/hdax and xfs problems
- From: Lars Marowsky-Bree <lmb@xxxxxxx>
- Re: mounting /dev/hdax and xfs problems
- From: Nerijus Baliunas <nerijus@xxxxxxxxxxxxxxxxxxxxx>
- Re: possible to use 1 drive as hot failover for 2 raid1's?
- From: Lars Marowsky-Bree <lmb@xxxxxxx>
- possible to use 1 drive as hot failover for 2 raid1's?
- From: Dan Hollis <goemon@xxxxxxxxx>
- mounting /dev/hdax and xfs problems
- From: Nerijus Baliunas <nerijus@xxxxxxxxxxxxxxxxxxxxx>
- raid5 failed "Operation continuing on 4 devices" (out of 8)
- From: Timo Boettcher <spida@xxxxxxx>
- Weird Interrupt Problem..
- From: Gordon Henderson <gordon@xxxxxxxxxx>
- parallel resync
- From: Luca Berra <bluca@xxxxxxxxxx>
- Faulty raid5.
- From: afu@xxxxxxxxxxxxxxx
- Re: Recovering files on a raid...
- From: seth vidal <skvidal@xxxxxxxxxxxx>
- Recovering files on a raid...
- From: Loïc Paillotin <loic.paillotin@xxxxxxxxxxxxxx>
- Re: How robust is MD/multipath????
- From: "Doug Griswold" <griswld@xxxxxxxxxx>
- Re: How robust is MD/multipath????
- From: "Doug Griswold" <griswld@xxxxxxxxxx>
- Re: How robust is MD/multipath????
- From: Lars Marowsky-Bree <lmb@xxxxxxx>
- Re: How robust is MD/multipath????
- From: Lars Marowsky-Bree <lmb@xxxxxxx>
- How robust is MD/multipath????
- From: "Doug Griswold" <griswld@xxxxxxxxxx>
- Re: resync on every raidstart
- From: spam@xxxxxxxxxxxxxxxxxxxx (Dick Streefland)
- Patch for raidtools-1.00.3 compile error under gcc 3.3.1
- From: achurch@xxxxxxxxxxx (Andrew Church)
- Re: resync on every raidstart
- From: spam@xxxxxxxxxxxxxxxxxxxx (Dick Streefland)
- Re: [PATCH] fixes defect with kernel BUG using multipath on 2.6.0-test5
- From: Jens Axboe <axboe@xxxxxxx>
- [PATCH] fixes defect with kernel BUG using multipath on 2.6.0-test5
- From: Steven Dake <sdake@xxxxxxxxxx>
- Expert opinion on "Recovering from a multiple disk failure"
- From: "Christof Soehngen" <christof@xxxxxxxxxxxx>
- Re: Raid1 recovery problem - need help!
- From: "Tomi Orava" <tomimo+linux-raid@xxxxxxxxxxxxxxxxxx>
- Re: Raid1 recovery problem - need help!
- From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
- Re: Raid1 recovery problem - need help!
- From: "Tomi Orava" <tomimo+linux-raid@xxxxxxxxxxxxxxxxxx>
- Re: Raid1 recovery problem - need help!
- From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
- Re: Raid1 recovery problem - need help!
- From: "Tomi Orava" <tomimo+linux-raid@xxxxxxxxxxxxxxxxxx>
- Re: Raid1 recovery problem - need help!
- From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
- Raid1 recovery problem - need help!
- From: "Tomi Orava" <tomimo+linux-raid@xxxxxxxxxxxxxxxxxx>
- Oops, panic with RAID5, 2.6.0-test5-mm4
- From: Torrey Hoffman <thoffman@xxxxxxxxx>
- Re: no resync after hotadd
- From: Lars Marowsky-Bree <lmb@xxxxxxx>
- raid5 algorithm
- From: Loris <loris@xxxxxxxxxxxxxxx>
- [no subject]
- From: Loris <loris@xxxxxxxxxxxxxxx>
- RE: no resync after hotadd
- From: "Cress, Andrew R" <andrew.r.cress@xxxxxxxxx>
- Software Raid: raidhotadd No Resyncing Array
- From: "kaltar" <kaltar@xxxxxxxxxx>
- no resync after hotadd
- From: "Cress, Andrew R" <andrew.r.cress@xxxxxxxxx>
- BUG: raid0_make_request bug in kernel 2.6.0-test5-bk10
- From: Andreas Feldmann <aef@xxxxxxxxxxxx>
- Re: RAID1: Disks alternating on reads
- From: Juri Haberland <list-linux.raid@xxxxxxxxxxx>
- Re: RAID1: Disks alternating on reads
- From: Juri Haberland <list-linux.raid@xxxxxxxxxxx>
- kernel 2.6 hardware RAID
- From: Kim "Højgaard-Hansen" <hi_fibrian@xxxxxxxxx>
- [fixes] Re: Locking bugs in 2.4 md.c
- From: Lars Marowsky-Bree <lmb@xxxxxxx>
- softraid5 disk order check
- From: "Loris-Guillaume Minoia" <miguillo@xxxxxxxxxxx>
- Re: resync on every raidstart
- From: dick.streefland@xxxxxxxxx (Dick Streefland)
- RE: RAID1: Disks alternating on reads
- From: "Bailey, Scott" <scott.bailey@xxxxxxx>
- Re: Locking bugs in 2.4 md.c
- From: Lars Marowsky-Bree <lmb@xxxxxxx>
- Re: RAID1: Disks alternating on reads
- From: Lars Marowsky-Bree <lmb@xxxxxxx>
- Re: resync on every raidstart
- From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
- Re: moving softraid5 from a computer to another
- From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
- moving softraid5 from a computer to another
- From: "Loris-Guillaume Minoia" <miguillo@xxxxxxxxxxx>
- [PATCH] md - 3 of 3 - change 'or' to 'plus' in raid1
- From: NeilBrown <neilb@xxxxxxxxxxxxxxx>
- [PATCH] md - 1 of 3 - Don't setup make_request_fn for md array until *after* it has been start.
- From: NeilBrown <neilb@xxxxxxxxxxxxxxx>
- [PATCH] md - 2 of 3 - MODULE_ALIAS for md
- From: NeilBrown <neilb@xxxxxxxxxxxxxxx>
- Re: RAID1: Disks alternating on reads
- From: "Andrew Herdman" <andrew@xxxxxxxxx>
- Re: RAID1: Disks alternating on reads
- From: Juri Haberland <list-linux.raid@xxxxxxxxxxx>
- Re: RAID1: Disks alternating on reads
- From: Catalin BOIE <util@xxxxxxxxxxxxxxx>
- Re: Locking bugs in 2.4 md.c
- From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
- Initrd, Software Raid and Failure to Mount Root FS
- From: Darryl Barlow <darrylb@xxxxxxxxxxxxxx>
- resync on every raidstart
- From: dick.streefland@xxxxxxxxx (Dick Streefland)
- RAID1: Disks alternating on reads
- From: "Andrew Herdman" <andrew@xxxxxxxxx>
- Re: looking for cheap(er) RAID
- From: Gordon Henderson <gordon@xxxxxxxxxx>
- Ext3 inconsistencies again
- From: Vladimir Trebicky <trebicky@xxxxxxxx>
- looking for cheap(er) RAID
- Re: Locking bugs in 2.4 md.c
- From: Lars Marowsky-Bree <lmb@xxxxxxx>
- Re: Locking bugs in 2.4 md.c
- From: Lars Marowsky-Bree <lmb@xxxxxxx>
- Re: Locking bugs in 2.4 md.c
- From: Lars Marowsky-Bree <lmb@xxxxxxx>
- Re: Locking bugs in 2.4 md.c
- From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
- Locking bugs in 2.4 md.c
- From: Lars Marowsky-Bree <lmb@xxxxxxx>
- Re: md multipath and failover
- From: Lars Marowsky-Bree <lmb@xxxxxxx>
- Bug in the raidtools-1.00.3 package
- From: Suresh Grandhi <Sureshg@xxxxxxx>
- RAID5 questions
- From: Don Jessup <donj@xxxxxxxxx>
- Re: Software Raid Autodetection Problem
- From: Darryl Barlow <darrylb@xxxxxxxxxxxxxx>
- RAID auto start issue
- From: Nick DeClario <nick@xxxxxxxxxxxxxxxxxxx>
- Supporting Promise RAID5?
- From: Jeff Garzik <jgarzik@xxxxxxxxx>
- Re: Software Raid Autodetection Problem
- From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
- Re: Software Raid Autodetection Problem
- From: Darryl Barlow <darrylb@xxxxxxxxxxxxxx>
- Re: Software Raid Autodetection Problem
- From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
- Re: raidreconf error
- From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
- Re: help! how do I mark spare drive as active without reconstruct?
- From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
- Re: recovery not starting: wrong superblock? multipath instead of raid1 !? (long!)
- From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
- Re: Does md work in 2.6 yet?
- From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
- Re: a couple of mdadm questions
- From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
- Re: bugs in md.c
- From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
- Re: does ext3 trample on mkraid superblocks and visa-versa?
- From: "Eric Wood" <eric@xxxxxxxxxxxxx>
- Re: md multipath and failover
- From: "Doug Griswold" <griswld@xxxxxxxxxx>
- Re: Converting a non-RAID RedHat System to run on Software RAID
- From: "Eric Wood" <eric@xxxxxxxxxxxxx>
- Re: md multipath and failover
- From: "Doug Griswold" <griswld@xxxxxxxxxx>
- raidreconf error
- From: "Cristian Banciu" <Cristian.Banciu@xxxxxxxxxx>
- raidreconf eror
- From: "Cristian Banciu" <Cristian.Banciu@xxxxxxxxxx>
- resize2fs woes...
- From: "akshaysalkar" <akshaysalkar@xxxxxxxxxxxxxx>
- Re: md multipath and failover
- From: Lars Marowsky-Bree <lmb@xxxxxxx>
- help! how do I mark spare drive as active without reconstruct?
- From: Bill Welch <billw@xxxxxxxxxxxxxx>
- md multipath and failover
- From: "Doug Griswold" <griswld@xxxxxxxxxx>
- Re: does ext3 trample on mkraid superblocks and visa-versa?
- From: dean gaudet <dean-list-linux-raid@xxxxxxxxxx>
- does ext3 trample on mkraid superblocks and visa-versa?
- From: "Eric Wood" <eric@xxxxxxxxxxxxx>
- Re: Benchmarks comparing 3ware 7410 RAID5 to Linux md
- From: Joshua Baker-LePain <jlb17@xxxxxxxx>
- Re: Converting a non-RAID RedHat System to run on Software RAID
- From: "Bill Rugolsky Jr." <brugolsky@xxxxxxxxxxxxxxxxxxxxxxxxx>
- Software Raid Autodetection Problem
- From: Darryl Barlow <darrylb@xxxxxxxxxxxxxx>
- RE: Converting a non-RAID RedHat System to run on Software RAID
- From: "Cress, Andrew R" <andrew.r.cress@xxxxxxxxx>
- Converting a non-RAID RedHat System to run on Software RAID
- From: "Eric Wood" <eric@xxxxxxxxxxxxx>
- md multipath w/ 2 hba's
- From: "Doug Griswold" <griswld@xxxxxxxxxx>
- recovery not starting: wrong superblock? multipath instead of raid1 !? (long!)
- From: Richard Ems <r.ems@xxxxxxx>
- Does md work in 2.6 yet?
- Re: bugs in md.c
- From: Alessandro Bono <a.bono@xxxxxxxxx>
- Re: Benchmarks comparing 3ware 7410 RAID5 to Linux md
- From: Aaron Lehmann <aaronl@xxxxxxxxxxx>
- Re: Benchmarks comparing 3ware 7410 RAID5 to Linux md
- From: Kanoa Withington <kanoa@xxxxxxxxxxxxxxx>
- Re: Benchmarks comparing 3ware 7410 RAID5 to Linux md
- From: dean gaudet <dean-list-linux-raid@xxxxxxxxxx>
- Re: Benchmarks comparing 3ware 7410 RAID5 to Linux md
- From: "Peter L. Ashford" <ashford@xxxxxxxx>
- Benchmarks comparing 3ware 7410 RAID5 to Linux md
- From: Aaron Lehmann <aaronl@xxxxxxxxxxx>
- Re: a couple of mdadm questions
- From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
- bugs in md.c
- From: Alessandro Bono <a.bono@xxxxxxxxx>
- Re: a couple of mdadm questions
- From: Luca Berra <bluca@xxxxxxxxxx>
- Re: a couple of mdadm questions
- From: seth vidal <skvidal@xxxxxxxxxxxx>
- Intel D875PBZ RAID 0 - Help with Install
- From: "Paul Hendricksen" <paul.hendricksen@xxxxxxxxxxxxx>
- Re: a couple of mdadm questions
- From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
- Re: md: bug in file md.c, line 1440 (2.4.22)
- From: Andre Tomt <andre@xxxxxxxx>
- a couple of mdadm questions
- From: seth vidal <skvidal@xxxxxxxxxxxx>
- HOWTO: mark spare drive as active without reconstruct
- From: Bill Welch <bill@xxxxxxxxxxx>
- promise reconstruction problem raid1
- From: Paul <ocran@xxxxxxx>
- 2.4.22 + RAID 1 + SATA + 2 disks => no maximum speed
- From: Catalin BOIE <util@xxxxxxxxxxxxxxx>
- Re: raid0 to raid1
- From: "pg" <pg@xxxxxxxxxxxxx>
- Re: Minor RAID-1 oddity... any way to fix?
- Re: Minor RAID-1 oddity... any way to fix?
- From: Paul Clements <Paul.Clements@xxxxxxxxxxxx>
- Minor RAID-1 oddity... any way to fix?
- Re: raid0 to raid1
- From: Steven Dake <sdake@xxxxxxxxxx>
- Re: RAID reconstruction problems
- From: Bernd Schubert <bernd-schubert@xxxxxx>
- Re: Problem converting raid-5 array from 2.2.17 into 2.4.22
- From: "John Doe" <public_address_911@xxxxxxxxxxx>
- Re: Problem converting raid-5 array from 2.2.17 into 2.4.22
- From: "John Doe" <public_address_911@xxxxxxxxxxx>
- Re: md: bug in file md.c, line 1440 (2.4.22)
- From: Lars Marowsky-Bree <lmb@xxxxxxx>
- raid0 to raid1
- From: "pg" <pg@xxxxxxxxxxxxx>
- Re: RAID reconstruction problems
- From: Michael Welsh Duggan <mwd@xxxxxxxx>
- Re: md: bug in file md.c, line 1440 (2.4.22)
- From: Mike Fedyk <mfedyk@xxxxxxxxxxxxx>
- Re: [PATCH 2.6] md: persistent (file-backed) bitmap and asyncwrites
- From: Paul Clements <Paul.Clements@xxxxxxxxxxxx>
- Re: md: bug in file md.c, line 1440 (2.4.22)
- From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
- Re: Problem converting raid-5 array from 2.2.17 into 2.4.22
- From: "John Doe" <public_address_911@xxxxxxxxxxx>
- Re: Problem converting raid-5 array from 2.2.17 into 2.4.22
- From: "John Doe" <public_address_911@xxxxxxxxxxx>
- Problem converting raid-5 array from 2.2.17 into 2.4.22
- From: "John Doe" <public_address_911@xxxxxxxxxxx>
- Re: power saving..
- From: Gordon Henderson <gordon@xxxxxxxxxx>
- Re: RAID reconstruction problems
- From: Bernd Schubert <bernd-schubert@xxxxxx>
- Re: RAID reconstruction problems
- From: "Donghui Wen" <dhwen@xxxxxxxxxxxxxxxxxxx>
- RAID reconstruction problems
- From: Michael Welsh Duggan <md5i@xxxxxxxxxx>
- IDE Performance issues
- From: "Theepan" <tornado@xxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 2.6] md: persistent (file-backed) bitmap and async writes
- From: Steven Dake <sdake@xxxxxxxxxx>
- [PATCH 2.6] md: persistent (file-backed) bitmap and async writes
- From: Paul Clements <Paul.Clements@xxxxxxxxxxxx>
- 2.422 + RAID 1 + SATA + 2 disks => no maximum speed
- From: Catalin BOIE <util@xxxxxxxxxxxxxxx>
- Re: Consensus?...
- From: "Peter L. Ashford" <ashford@xxxxxxxx>
- RE: Consensus?...
- From: "Dhaval Patel" <dhaval@xxxxxxxx>
- RE: Consensus?...
- From: "Rechenberg, Andrew" <ARechenberg@xxxxxxxxxxxxxxxxxxxxxxxxx>
- Consensus?...
- From: Bob Hillegas <bobhillegas@xxxxxxxxxxxxxx>
- Re: 2.6.0-test{1,2,3} kernels + software raid 0 + xfs broken?
- From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
- PROBLEM: root mounted read only on kernel 2.6.0-test4-bk2
- From: Andreas Feldmann <aef@xxxxxxxxxxxx>
- Re: RAID recovery question
- From: Eric Rumer <eric.rumer@xxxxxxxxxx>
- Re: 2.6.0-test{1,2,3,4} kernels + software raid 0 + xfs broken?
- From: Florian Schanda <ma1flfs@xxxxxxxxxx>
- Re: RAID recovery question
- From: mjstumpf <mjstumpf@xxxxxxxxx>
- Re: 2.6.0-test{1,2,3} kernels + software raid 0 + xfs broken?
- From: Florian Schanda <ma1flfs@xxxxxxxxxx>
- RE: Power Saving possible ? (fwd)
- From: "raidlist" <raidlist@xxxxxxxxxxx>
- RAID recovery question
- From: Eric Rumer <eric.rumer@xxxxxxxxxx>
- Re: interesting.. 3 ultra100's in a single machine.
- From: Steven Dake <sdake@xxxxxxxxxx>
- interesting.. 3 ultra100's in a single machine.
- From: mjstumpf <mjstumpf@xxxxxxxxx>
- Re: sorta OT: vibration dampening, maximum promise cards?
- From: "Peter L. Ashford" <ashford@xxxxxxxx>
- Re: sorta OT: vibration dampening, maximum promise cards?
- From: Kanoa Withington <kanoa@xxxxxxxxxxxxxxx>
- Re: sorta OT: vibration dampening, maximum promise cards?
- From: "Peter L. Ashford" <ashford@xxxxxxxx>
- Re: question regarding a raid-1 set
- From: Paul Clements <Paul.Clements@xxxxxxxxxxxx>
- Re: question regarding a raid-1 set
- From: Jeroen Baten <jbaten@xxxxxxx>
- Re: question regarding a raid-1 set
- From: Paul Clements <Paul.Clements@xxxxxxxxxxxx>
- Re: Power Saving possible ?
- From: mjstumpf <mjstumpf@xxxxxxxxx>
- sorta OT: vibration dampening, maximum promise cards?
- From: mjstumpf <mjstumpf@xxxxxxxxx>
- Power Saving possible ?
- From: "raidlist" <raidlist@xxxxxxxxxxx>
- Re: question regarding a raid-1 set
- From: "Martin K. Petersen" <mkp@xxxxxxx>
- question regarding a raid-1 set
- From: Jeroen Baten <jbaten@xxxxxxx>
- convert raid0 to raid 1
- From: "pg" <pg@xxxxxxxxxxxxx>
- [PATCH] md - 1 of 4 - Fix module ref counting for md.
- From: NeilBrown <neilb@xxxxxxxxxxxxxxx>
- [PATCH] md - 2 of 4 - Honour the read-ahead for for reads in raid5.
- From: NeilBrown <neilb@xxxxxxxxxxxxxxx>
- [PATCH] md - 4 of 4 - Fix md superblock incompatabilities with 2.4 kernels.
- From: NeilBrown <neilb@xxxxxxxxxxxxxxx>
- [PATCH] md - 3 of 4 - Set max_sectors for raid0 only, not for all raid levels.
- From: NeilBrown <neilb@xxxxxxxxxxxxxxx>
- Re: power saving..
- From: Mike Dresser <mdresser_l@xxxxxxxxxxxxxxxxxx>
- Re: power saving..
- From: "Peter L. Ashford" <ashford@xxxxxxxx>
- power saving..
- From: mjstumpf <mjstumpf@xxxxxxxxx>
- Re: raid partition crash
- From: Mads Peter Bach <mpb@xxxxxxxxxx>
- raid partition crash
- From: "Mikael Chambon" <raid-ml@xxxxxxxxxx>
- 2.6.0-test{1,2,3} kernels + software raid 0 + xfs broken?
- From: Florian Schanda <ma1flfs@xxxxxxxxxx>
- RAID detection
- From: Eric BENARD / Free <ebenard@xxxxxxx>
- Re: [PATCH 2.6.0-test3] avoid raid1 resync abort
- From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
- Re: RAID5 rebuild difficulties
- From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
- Re: raid question
- From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
- Re: mr. brown: point me to text on RAID
- From: berk walker <berk.walker@xxxxxxxxxxx>
- [PATCH 2.6.0-test3] avoid raid1 resync abort
- From: Paul Clements <Paul.Clements@xxxxxxxxxxxx>
- RAID5 rebuild difficulties
- From: Eric BENARD / Free <ebenard@xxxxxxx>
- raid-0 question
- From: jshankar <jshankar@xxxxxxxxxxxxxxxx>
- Re: pdc20276 /dev/ataraid/disc2 problem
- From: Nix <nix@xxxxxxxxx>
- Re: Ext3 inconsistencies
- From: Gordon Henderson <gordon@xxxxxxxxxx>
- Ext3 inconsistencies
- From: Vladimir Trebicky <trebicky@xxxxxxxx>
- pdc20276 /dev/ataraid/disc2 problem
- From: Nix <nix@xxxxxxxxx>
- raid question
- From: jshankar <jshankar@xxxxxxxxxxxxxxxx>
- Replacing failed disk in RAID1
- From: Dave Wreski <dave@xxxxxxxxxxxxxxxxxxx>
- raidreconf success raid0 -> raid5, 60051568kB
- From: Jeff Baitis <baitisj@xxxxxxxxxxxxx>
- Re: mr. brown: point me to text on RAID
- From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
- mr. brown: point me to text on RAID
- From: berk walker <berk.walker@xxxxxxxxxxx>
- Re: mkraid-problems
- From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
- mkraid-problems
- From: Ekkehard Lissner <ekkehard@xxxxxxxxxxx>
- [PATCH] md - 1 of 2 - Fix "bio too big" problem with md
- From: NeilBrown <neilb@xxxxxxxxxxxxxxx>
- [PATCH] md - 2 of 2 - Fix module ref counting for md.
- From: NeilBrown <neilb@xxxxxxxxxxxxxxx>
- Re: raid5 on 2.4.21 and reconstruction problem
- From: Paul Clements <Paul.Clements@xxxxxxxxxxxx>
- Re: raid5 on 2.4.21 and reconstruction problem
- From: Arkadiusz Miskiewicz <arekm@xxxxxxxxxxxxx>
- Re: raid5 on 2.4.21 and reconstruction problem
- From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
- Help: any mdadm based cgi perl for webmin
- From: "Bo Moon" <bo@xxxxxxxxxxxxxxxxxxxxxx>
- Re: RAID5 recovery after disk-change
- From: Paul Clements <Paul.Clements@xxxxxxxxxxxx>
- Re: RAID5 recovery after disk-change
- From: Simon Frettloeh <sifr@xxxxxxxxxxxxxxxxxxxxx>
- RAID5 recovery after disk-change
- From: Simon Frettloeh <sifr@xxxxxxxxxxxxxxxxxxxxx>
- Raid 1 / Multiple Reboot Problem
- From: Derek Yeung <dky@xxxxxxxxxxxxxxxx>
- Re: raid5 on 2.4.21 and reconstruction problem
- From: Arkadiusz Miskiewicz <arekm@xxxxxxxxxxxxx>
- Any mdadm based cgi perl script for webmin?
- From: "Bo Moon" <bo@xxxxxxxxxxxxxxxxxxxxxx>
- Re: Raid Q
- From: Paul Clements <Paul.Clements@xxxxxxxxxxxx>
- Re: raid5 on 2.4.21 and reconstruction problem
- From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
- raid5 not responding (LONG)
- From: "Claudio Lapidus" <clapidus@xxxxxxxxxxx>
- Re: raid5 on 2.4.21 and reconstruction problem
- From: Arkadiusz Miskiewicz <arekm@xxxxxxxxxxxxx>
- Re: smart raid1 reads?
- From: "Michael T. Babcock" <mbabcock@xxxxxxxxxxxxxx>
- Re: smart raid1 reads?
- From: "Michael T. Babcock" <mbabcock@xxxxxxxxxxxxxx>
- very stupid question about dpt_i2o
- From: "Alexandru N. Barloiu" <slak@xxxxxxx>
- Raid Q
- From: "Jose Nathaniel G. Nengasca" <admin@xxxxxxxxxxxxxx>
- [PATCH] Disable raid5 handling of read-ahead
- From: NeilBrown <neilb@xxxxxxxxxxxxxxx>
- Re: faulty mdstat
- From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
- Re: raid5 on 2.4.21 and reconstruction problem
- From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
- faulty mdstat
- From: Eric BENARD / Free <ebenard@xxxxxxx>
- raid5 on 2.4.21 and reconstruction problem
- From: Arkadiusz Miskiewicz <arekm@xxxxxxxxxxxxx>
- Re: Summary of the Multi-Path BOF at OLS and future directions
- From: Lars Marowsky-Bree <lmb@xxxxxxx>
- Re: Summary of the Multi-Path BOF at OLS and future directions
- From: Steven Dake <sdake@xxxxxxxxxx>
- Re: RAID-1 does not rebuild after hot-add
- From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
- raid-1 boot with raid-5 system
- From: "taddis" <taddis@xxxxxxxxxx>
- Re: RAID-1 does not rebuild after hot-add
- From: David Chow <davidchow@xxxxxxxxxxxxxxxx>
- Re: [2.4.21] Small patch to quieten md.c boot messages
- From: Mark ZZZ Smith <markzzzsmith@xxxxxxxxxxxx>
- Re: RAID-1 does not rebuild after hot-add
- From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
- Re: Help!About MD on shared storage.
- From: David Chow <davidchow@xxxxxxxxxxxxxxxx>
- Re: RAID-1 does not rebuild after hot-add
- From: David Chow <davidchow@xxxxxxxxxxxxxxxx>
- Re: [2.4.21] Small patch to quieten md.c boot messages
- From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
- Re: Faulty disk detection code: looking to tweak it for network devices
- From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
- Re: RAID-1 does not rebuild after hot-add
- From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
- Faulty disk detection code: looking to tweak it for network devices
- From: "Ryan P. Joseph" <rjoseph@xxxxxxxxxxxx>
- Re: reconstructing raid5 with bad sectors
- From: dean gaudet <dean-list-linux-raid@xxxxxxxxxx>
- Re: reconstructing raid5 with bad sectors
- From: Ross Vandegrift <ross@xxxxxxxxxxxxxxxx>
- Re: RAID-1 does not rebuild after hot-add
- From: Paul Clements <Paul.Clements@xxxxxxxxxxxx>
- Re: Help!About MD on shared storage.
- From: Steven Dake <sdake@xxxxxxxxxx>
- reconstructing raid5 with bad sectors
- From: dean gaudet <dean-list-linux-raid@xxxxxxxxxx>
- Re: RAID-1 does not rebuild after hot-add
- From: Ross Vandegrift <ross@xxxxxxxxxxxxxxxx>
- Re: RAID-1 does not rebuild after hot-add
- From: David Chow <davidchow@xxxxxxxxxxxxxxxx>
- Re: RAID-1 does not rebuild after hot-add
- From: David Chow <davidchow@xxxxxxxxxxxxxxxx>
- Re: RAID-1 does not rebuild after hot-add
- From: David Chow <davidchow@xxxxxxxxxxxxxxxx>
- Re: RAID-1 does not rebuild after hot-add
- From: Andrew Rechenberg <arechenberg@xxxxxxxxxxxx>
- Re: RAID-1 does not rebuild after hot-add
- From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
- Re: RAID-1 does not rebuild after hot-add
- From: Stephen Lee <splee@xxxxxxxxxx>
- RAID-1 does not rebuild after hot-add
- From: David Chow <davidchow@xxxxxxxxxxxxxxxx>
- Fwd: Re: The place that saved me
- From: bbruce_28@xxxxxxxxx
- [2.4.21] Small patch to quieten md.c boot messages
- From: Mark ZZZ Smith <markzzzsmith@xxxxxxxxxxxx>
- Re: how to uninstall raid
- From: Jose Luis Domingo Lopez <linux-raid@xxxxxxxxxxxxx>
- how to uninstall raid
- From: "Zhai, Edwin" <edwin.zhai@xxxxxxxxx>
- multipath howto?
- From: Rich Ramos <lists@xxxxxxxxxxxxx>
- ANNOUNCE: mdadm 1.3.0 - A tools for managing Soft RAID under Linux
- From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
- Re: where to buy very very large cases
- From: Mike Dresser <mdresser_l@xxxxxxxxxxxxxxxxxx>
- Re: where to buy very very large cases
- From: Ross Vandegrift <ross@xxxxxxxxxxxxxxxx>
- Re: where to buy very very large cases
- From: Mike Dresser <mdresser_l@xxxxxxxxxxxxxxxxxx>
- Re: where to buy very very large cases
- From: Mike Dresser <mdresser_l@xxxxxxxxxxxxxxxxxx>
- Re: where to buy very very large cases
- From: mjstumpf <mjstumpf@xxxxxxxxx>
- Re: where to buy very very large cases
- From: mjstumpf <mjstumpf@xxxxxxxxx>
- Re: where to buy very very large cases
- From: Mike Dresser <mdresser_l@xxxxxxxxxxxxxxxxxx>
- Re: where to buy very very large cases
- From: Dominik Kubla <dominik.kubla@xxxxxxxxxxxx>
- Re: where to buy very very large cases
- From: Jim Ramsey <jwramsey@xxxxxxxxx>
- Re: where to buy very very large cases
- From: Ross Vandegrift <ross@xxxxxxxxxxxxxxxx>
- Re: where to buy very very large cases
- From: Mike Dresser <mdresser_l@xxxxxxxxxxxxxxxxxx>
- Re: where to buy very very large cases
- From: Mike Dresser <mdresser_l@xxxxxxxxxxxxxxxxxx>
- Re: where to buy very very large cases
- From: Mads Peter Bach <mpb@xxxxxxxxxx>
- Re: where to buy very very large cases
- From: Jim Ramsey <jwramsey@xxxxxxxxx>
- Re: where to buy very very large cases
- From: "Rev. Jeffrey Paul" <sneak@xxxxxxxxxxxx>
- where to buy very very large cases
- From: mjstumpf <mjstumpf@xxxxxxxxx>
- bug with resync in specific config
- From: mjstumpf <mjstumpf@xxxxxxxxx>
- [PATCH] md - Resolve problem with refcounting of md arrays.
- From: NeilBrown <neilb@xxxxxxxxxxxxxxx>
- why didn't the RAID fail?
- From: "Robert L. Harris" <Robert.L.Harris@xxxxxxxx>
- Re: raid 5 on linux --againnnn (sorryy it's big)
- From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
- Re: raid 5 on linux --againnnn (sorryy it's big)
- From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
- Re: raid 5 on linux --againnnn (sorryy it's big)
- Re: Fast RAID rebuild?
- Re: raid 5 on linux --againnnn (sorryy it's big)
- From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
- Re: RAID 5 On Linux
- From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
- raid 5 on linux --againnnn (sorryy it's big)
- Re: RAID 5 On Linux
- Re: RAID 5 On Linux
- From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
- Re: RAID 5 On Linux
- Re: Software RAID within RAID
- From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
- Software RAID within RAID
- From: David Anderson <david.anderson@xxxxxxxxxx>
- Re: RAID 5 On Linux
- From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
- RAID 5 On Linux
- Re: Fast RAID rebuild?
- From: Warren Young <warren@xxxxxxxxxxx>
- Re: 2.6.0-test1-bk2 ate my root raid
- From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
- 2.6.0-test1-bk2 ate my root raid
- From: Thomas <thomas@xxxxxxxxxx>
- Fast RAID rebuild?
- Recreating RAID from a healthy full disk
- From: "Vladimír Třebický" <trebicky@xxxxxxxx>
- Re: 2.4.21 kernel upgrade and md support (especially mdp partitionedarrays)
- From: Vinnie <listacct1@xxxxxxxxxx>
- 2.4.21 kernel upgrade and md support (especially mdp partitionedarrays)
- From: Vinnie <listacct1@xxxxxxxxxx>
- Re: hardware raid
- From: "Peter L. Ashford" <ashford@xxxxxxxx>
- hardware raid
- From: "Mikael Chambon" <raid-ml@xxxxxxxxxx>
- A simple question
- From: "Donghui Wen" <dhwen@xxxxxxxxxxxxxxxxxxx>
- Booting a RAID-1
- From: "Miguel Angel Martinez Ezquerro" <scsmaezm@xxxxxxxxx>
- Re: [ENBD] is raid of raid possible ?
- From: Andrew Rechenberg <arechenberg@xxxxxxxxxxxx>
- Re: [ENBD] is raid of raid possible ?
- From: Bernd Schubert <bernd.schubert@xxxxxxxxxxxxxxxxxxxxx>
- Re: Performance difference between two raid0 arrays on same drives?
- From: Michel Bellais <michel@xxxxxxxxxx>
- Re: RAID design
- From: Gordon Henderson <gordon@xxxxxxxxxx>
- Re: RAID design
- From: Sandro Dentella <sandro.dentella@xxxxxx>
- Re: RAID design
- From: "David Rees" <dbr@xxxxxxxxxxxxxxxx>
- Re: Performance difference between two raid0 arrays on same drives?
- From: Michel Bellais <michel@xxxxxxxxxx>
- Re: Performance difference between two raid0 arrays on same drives?
- From: Mads Peter Bach <mpb@xxxxxxxxxx>
- Re: Performance difference between two raid0 arrays on same drives?
- From: Gordon Henderson <gordon@xxxxxxxxxx>
- Re: Performance difference between two raid0 arrays on same drives?
- From: Michel Bellais <michel@xxxxxxxxxx>
- Re: RAID design
- From: Gordon Henderson <gordon@xxxxxxxxxx>
- Re: Performance difference between two raid0 arrays on same drives?
- From: Gregory Leblanc <gleblanc@xxxxxxxxxxxxxxx>
- RAID design
- From: "Mikael Chambon" <raid-ml@xxxxxxxxxx>
- Re: Tecs informations about Software RAID on Linux
- From: "Peter L. Ashford" <ashford@xxxxxxxx>
- Tecs informations about Software RAID on Linux
- From: Leonardo Dias <leoadias@xxxxxxxxxxxx>
- Performance difference between two raid0 arrays on same drives?
- From: Michel <michel@xxxxxxxxxx>
- Bugfix: mkraid
- From: Peter.Seiderer@xxxxxx
- is raid of raid possible ?
- From: Bernd Schubert <bernd.schubert@xxxxxxxxxxxxxxxxxxxxx>
- Re: RAID md-personality
- From: Paul Clements <Paul.Clements@xxxxxxxxxxxx>
- Re: RAID recovery
- From: Avijit Pathania <foulplay@xxxxxxxxxxxx>
- Re: RAID SYNC
- From: Avijit Pathania <foulplay@xxxxxxxxxxxx>
- RAID recovery
- From: "Mikael Chambon" <raid-ml@xxxxxxxxxx>
- RAID SYNC
- From: "Mikael Chambon" <raid-ml@xxxxxxxxxx>
- RAID md-personality
- From: "Mikael Chambon" <raid-ml@xxxxxxxxxx>
- Re: Checking consistency of Linux software RAID
- From: "Martin Bene" <martin.bene@xxxxxxxxxxxxx>
- Re: Help with /etc/raidtab
- From: "Donghui Wen" <dhwen@xxxxxxxxxxxxxxxxxxx>
- Re: Help with /etc/raidtab
- From: "Bradley D. Thornton" <website.is@xxxxxxxxxxxxxxxx>
- Help with /etc/raidtab
- From: "Bradley D. Thornton" <website.is@xxxxxxxxxxxxxxxx>
- Re: ¿ the best journalist-filesystem for a raid5 ?
- From: "Corey McGuire" <coreyfro@xxxxxxxxxxxx>
- Re: Checking consistency of Linux software RAID
- From: "Corey McGuire" <coreyfro@xxxxxxxxxxxx>
- Re: software raid hangs.
- From: "Donghui Wen" <dhwen@xxxxxxxxxxxxxxxxxxx>
- Re: ¿ the best journalist-filesystem for a raid5 ?
- From: "Bradley D. Thornton" <website.is@xxxxxxxxxxxxxxxx>
- Re: software raid hangs.
- From: Matt Simonsen <matt_lists@xxxxxxxxxxxxxx>
- Raid 5, Not Detected At Startup
- From: Matt E <mgeusenet@xxxxxxxxx>
- software raid hangs.
- From: "Donghui Wen" <dhwen@xxxxxxxxxxxxxxxxxxx>
- Re: Checking consistency of Linux software RAID
- From: Bernd Schubert <bernd-schubert@xxxxxx>
- Re: Checking consistency of Linux software RAID
- From: "Corey McGuire" <coreyfro@xxxxxxxxxxxx>
- Re: Checking consistency of Linux software RAID
- From: Bernd Schubert <bernd-schubert@xxxxxx>
- Bug in mdadm?
- From: Tapani Utriainen <tapani@xxxxxxxxxxxxxx>
- Re: ¿ the best journalist-filesystem for a raid5 ?
- From: system_lists@xxxxxxxxxxxx
- Making more space in RAID5 array: questions
- From: Ruth Ivimey-Cook <Ruth.Ivimey-Cook@xxxxxxxxxx>
- RE: Booting a disk (mirrored) in other system
- From: "Miguel Angel Martinez Ezquerro" <scsmaezm@xxxxxxxxx>
- Re: ¿ the best journalist-filesystem for a raid5 ?
- From: Joshua Baker-LePain <jlb17@xxxxxxxx>
- Re: ¿ the best journalist-filesystem for a
- From: Stephen C Woods <scw@xxxxxxxxxxxxx>
- ¿ the best journalist-filesystem for a raid5 ?
- From: system_lists@xxxxxxxxxxxx
- Problems with autodetecting arrays
- From: Kari Kallioinen <karbas-raid@xxxxxxxxxxxxxxxxxxx>
- Re: Booting a disk (mirrored) in other system
- From: Andrew Rechenberg <arechenberg@xxxxxxxxxxxxxxxxxxxxxxxxx>
- Booting a disk (mirrored) in other system
- From: "Miguel Angel Martinez Ezquerro" <scsmaezm@xxxxxxxxx>
- Re: raid 5 crash and data loss
- From: Arne Brutschy <abrutschy@xxxxxxxx>
- raid 5 crash and data loss
- From: Arne Brutschy <abrutschy@xxxxxxxx>
- Re: Really need RESYNC at creation of array???
- From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
- Re: Really need RESYNC at the time of RAID1&5 creation?
- From: "Corey McGuire" <coreyfro@xxxxxxxxxxxx>
- Re: Really need RESYNC at the time of RAID1&5 creation?
- From: Lars Marowsky-Bree <lmb@xxxxxxx>
- Really need RESYNC at the time of RAID1&5 creation?
- From: "bmoon" <bo@xxxxxxxxxxxxxxxxxxxxxx>
- Re: Questions Degraded Array with LVM
- From: Scott McDermott <vaxerdec@xxxxxxxxxxxxxxx>
- Re: monitoring means for IBM ServeRAID driver?
- From: Lars Marowsky-Bree <lmb@xxxxxxx>
- monitoring means for IBM ServeRAID driver?
- From: mjstumpf <mjstumpf@xxxxxxxxx>
- Re: Checking consistency of Linux software RAID
- From: Lars Marowsky-Bree <lmb@xxxxxxx>
- Re: Checking consistency of Linux software RAID
- From: Gordon Henderson <gordon@xxxxxxxxxx>
- Re: Checking consistency of Linux software RAID
- From: Lars Marowsky-Bree <lmb@xxxxxxx>
- Re: Checking consistency of Linux software RAID
- From: Lars Marowsky-Bree <lmb@xxxxxxx>
- Re: Checking consistency of Linux software RAID
- From: Gordon Henderson <gordon@xxxxxxxxxx>
- Checking consistency of Linux software RAID
- From: "Martin Bene" <martin.bene@xxxxxxxxxxxxx>
- Re: Software RAID 1 Problem: "raid_autorun failed" booting from /dev/md0
- From: noriok <noriok@xxxxxxxxxxxxxxxxxxxxxxxxxx>
- Moving Raid
- From: "Brad Brad" <braddeicide@xxxxxxxxxxx>
- Re: 3ware 7500 performance, was: experiences with 3Ware 6400 3W-6400?
- From: Mike Dresser <mdresser_l@xxxxxxxxxxxxxxxxxx>
- Re: 3ware 7500 performance, was: experiences with 3Ware 6400 3W-6400?
- From: Mike Dresser <mdresser_l@xxxxxxxxxxxxxxxxxx>
- Re[2]: 3ware 7500 performance, was: experiences with 3Ware 6400 3W-6400?
- From: Alex Verbitsky <alexver5@xxxxxxx>
- Re: 3ware 7500 performance, was: experiences with 3Ware 6400 3W-6400?
- From: Mikael Abrahamsson <swmike@xxxxxxxxx>
- 3ware 7500 performance, was: experiences with 3Ware 6400 3W-6400?
- From: Alex Verbitsky <alexver5@xxxxxxx>
- Re[2]: experiences with 3Ware 6400 3W-6400?
- From: Alex Verbitsky <alexver5@xxxxxxx>
- Re: Safest way to renumber RAID-5 devices
- From: Ian Pilcher <pilchman@xxxxxxxxx>
- Re: Safest way to renumber RAID-5 devices
- From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
- Safest way to renumber RAID-5 devices
- From: Ian Pilcher <pilchman@xxxxxxxxx>
- Questions Degraded Array with LVM
- From: Matt E <mgeusenet@xxxxxxxxx>
- Re: Show me the cache, was Mirroring swap
- From: "Corey McGuire" <coreyfro@xxxxxxxxxxxx>
- Victory! re: RAID5 causing lockups
- From: "Corey McGuire" <coreyfro@xxxxxxxxxxxx>
- Victory! re: RAID5 causing lockups
- From: "Corey McGuire" <mcguire.corey@xxxxxxxxxxxxx>
- Re: experiences with 3Ware 6400 3W-6400?
- From: Gordon Henderson <gordon@xxxxxxxxxx>
- Re: experiences with 3Ware 6400 3W-6400?
- From: "Rev. Jeffrey Paul" <sneak@xxxxxxxxxxxx>
- Re: Show me the cache, was Mirroring swap
- From: Ricky Beam <jfbeam@xxxxxxxxxxxxxx>
- Re: experiences with 3Ware 6400 3W-6400?
- From: "David Rees" <dbr@xxxxxxxxxxxxxxxx>
- Re: experiences with 3Ware 6400 3W-6400?
- From: "David Rees" <dbr@xxxxxxxxxxxxxxxx>
- Re: Show me the cache, was Mirroring swap
- From: "Corey McGuire" <coreyfro@xxxxxxxxxxxx>
- Re: Mirroring swap
- From: Ricky Beam <jfbeam@xxxxxxxxxxxxxx>
- Re: experiences with 3Ware 6400 3W-6400?
- From: Maurice Hilarius <maurice@xxxxxxxxxxxx>
- Re: experiences with 3Ware 6400 3W-6400?
- From: Lars Marowsky-Bree <lmb@xxxxxxx>
- Re: experiences with 3Ware 6400 3W-6400?
- From: Mike Dresser <mdresser_l@xxxxxxxxxxxxxxxxxx>
- Re: experiences with 3Ware 6400 3W-6400?
- From: Gordon Henderson <gordon@xxxxxxxxxx>
- Re: experiences with 3Ware 6400 3W-6400?
- From: "Rev. Jeffrey Paul" <sneak@xxxxxxxxxxxx>
- Re: experiences with 3Ware 6400 3W-6400?
- From: "Corey McGuire" <coreyfro@xxxxxxxxxxxx>
- duplicate hdc partition table
- From: "Zeno R.R. Davatz" <zdavatz@xxxxxxxxxx>
- RE: Mirroring swap
- From: Gordon Henderson <gordon@xxxxxxxxxx>
- Re: experiences with 3Ware 6400 3W-6400?
- From: "David Rees" <dbr@xxxxxxxxxxxxxxxx>
- re: RAID5 causing lockups
- From: "Corey McGuire" <coreyfro@xxxxxxxxxxxx>
- re: RAID5 causing lockups
- From: Mike Dresser <mdresser_l@xxxxxxxxxxxxxxxxxx>
- re: RAID5 causing lockups
- From: "Corey McGuire" <coreyfro@xxxxxxxxxxxx>
- Re: Mirroring swap
- From: "Corey McGuire" <coreyfro@xxxxxxxxxxxx>
- Re: Software RAID 1 Problem: "raid_autorun failed" booting from /dev/md0
- From: noriok <noriok@xxxxxxxxxxxxxxxxxxxxxxxxxx>
- Re: Mirroring swap
- From: Scott McDermott <vaxerdec@xxxxxxxxxxxxxxx>
- Re: Mirroring swap
- From: "Corey McGuire" <coreyfro@xxxxxxxxxxxx>
- Re: Mirroring swap
- From: Scott McDermott <vaxerdec@xxxxxxxxxxxxxxx>
- Re: experiences with 3Ware 6400 3W-6400?
- From: Maurice Hilarius <maurice@xxxxxxxxxxxx>
- Re: experiences with 3Ware 6400 3W-6400?
- From: "David Rees" <dbr@xxxxxxxxxxxxxxxx>
- RE: Mirroring swap
- From: "Corey McGuire" <coreyfro@xxxxxxxxxxxx>
- RE: Mirroring swap
- From: Gregory Leblanc <gleblanc@xxxxxxxxxxxxxxx>
- Re: experiences with 3Ware 6400 3W-6400?
- From: Joshua Baker-LePain <jlb17@xxxxxxxx>
- experiences with 3Ware 6400 3W-6400?
- From: "Rev. Jeffrey Paul" <sneak@xxxxxxxxxxxx>
- Software raid hot-swappable?
- From: "Donghui Wen" <dhwen@xxxxxxxxxxxxxxxxxxx>
[Index of Archives]
[Linux RAID Wiki]
[ATA RAID]
[Linux SCSI Target Infrastructure]
[Linux Block]
[Linux IDE]
[Linux SCSI]
[Linux Hams]
[Device Mapper]
[Kernel]
[Linux Admin]
[Linux Net]
[GFS]
[RPM]
[git]
[Yosemite Forum]
[Linux Networking]