Re: Promise 378 tx2(plus) serial ata w/ 2.6.1

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Jan 28, 2004 at 08:56:03AM -0600, Wayde Milas wrote:
> Thought I'd try here before I went to the kernel mailing list.
> 
> I'm tying to get my promise 378 tx(plus2) chip thats built into my msi
> 865pe neo2 working. I'm aiming for a 4 drive sata raid 5 array, and I've
> got the 2 sata ports on the intel chip working flawlessly.

I'm using the MSI K8T Neo (AMD64) with the VIa & Promise 378 without hassles
on both the SATA controllers using a raid0 stripe on the drives connected
to the promise SATA. I'm using 2.6.0 since -test10 without hassles.
-
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux RAID Wiki]     [ATA RAID]     [Linux SCSI Target Infrastructure]     [Linux Block]     [Linux IDE]     [Linux SCSI]     [Linux Hams]     [Device Mapper]     [Device Mapper Cryptographics]     [Kernel]     [Linux Admin]     [Linux Net]     [GFS]     [RPM]     [git]     [Yosemite Forum]


  Powered by Linux