On Tue, 28 Oct 2003, Norman Schmidt wrote:
> I use a plain kernel.org 2.4.22 kernel with tw0 Ultra133 and one
> Ultra100 in one server. It works without problems. Are you sure you
> activated ATA/IDE/MFM/RLL -> IDE, ATA and ATAPI Block devices -> PROMISE
> PDC202(68|69|70|71|75|76|77)?
Absolutely. These board do not work in generic mode. From /var/log/dmesg:
PDC20269: IDE controller at PCI slot 02:05.0
PDC20269: chipset revision 2
PDC20269: not 100% native mode: will probe irqs later
ide2: BM-DMA at 0x3080-0x3087, BIOS settings: hde:pio, hdf:pio
ide3: BM-DMA at 0x3088-0x308f, BIOS settings: hdg:pio, hdh:pio
PDC20269: IDE controller at PCI slot 02:07.0
PDC20269: chipset revision 2
PDC20269: not 100% native mode: will probe irqs later
ide4: BM-DMA at 0x3090-0x3097, BIOS settings: hdi:pio, hdj:pio
ide5: BM-DMA at 0x3098-0x309f, BIOS settings: hdk:pio, hdl:pio
and from the .config file:
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_PDC202XX_BURST is not set
CONFIG_BLK_DEV_PDC202XX_NEW=y
# CONFIG_PDC202XX_FORCE is not set
CONFIG_BLK_DEV_PDC202XX=y
# CONFIG_BLK_DEV_ATARAID_PDC is not set
Gordon
-
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
