Re: Moving RAID 1 array to new server

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On  November 12, jean-rene.cormier@cipanb.ca wrote:
> And here's my /proc/mdstat:
> 
> Personalities : [raid1] [raid5]
> read_ahead 1024 sectors
> md0 : active raid1 hdg1[2] hde1[0]
>       60051456 blocks [2/1] [U_]
>       [=>...................]  recovery =  6.9% (4162176/60051456)
> finish=30.2min speed=30762K/sec
> unused devices: <none>
> 
> It seems to be rebuilding but will it stay marked as a spare drive or
> will it take over the main faulty drive after it's done rebuilding?
> 

Wait 30.2 minutes and see?
It should mark it as a fully active drive, no longer spare.

NeilBrown
-
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux RAID Wiki]     [ATA RAID]     [Linux SCSI Target Infrastructure]     [Linux Block]     [Linux IDE]     [Linux SCSI]     [Linux Hams]     [Device Mapper]     [Device Mapper Cryptographics]     [Kernel]     [Linux Admin]     [Linux Net]     [GFS]     [RPM]     [git]     [Yosemite Forum]


  Powered by Linux