Re: Promise TX2-plus and kernel 2.6

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Jan 22, 2004 at 11:25:42AM -0500, Jeff Garzik wrote:
> Keld Jørn Simonsen wrote:
> >I am running linux kernel 2.4.22-26mdk and it supports PATA right out of
> >the box, on a Promise TX2-plus controller. I have one disk on the PATA
> >port (and one disk on one of the SATA ports). I would probably like to
> >run kernel 2.6, mostly because I think of implementing some striping
> >RAID-1 on it and try that new module out, but if kernel 2.6 does not
> >support PATA on the TX2-plus then I am at a loss.
> 
> 
> It sounds like Mandrake added a non-standard Promise driver...  Consult 
> your vendor in this case.

I don't get this. Promise themselves say that TX2-plus is supported in
Redhat 7.3/8.0 and SuSE 7.3/8.0 in their data sheet:
http://www.promise.com/marketing/datasheet/file/SATA150_DS_101703.pdf
I read that to be that support is included in the standard kernel, and
has been for a long time, so it is a very stable driver, and standard.
But of cause I may be mistaken.

But you say that the standard 2.4 and 2.6 driver is not implementing PATA.
I am courious about the status of this.  Are we talking the same
controller?

Best regards
keld
-
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux RAID Wiki]     [ATA RAID]     [Linux SCSI Target Infrastructure]     [Linux Block]     [Linux IDE]     [Linux SCSI]     [Linux Hams]     [Device Mapper]     [Device Mapper Cryptographics]     [Kernel]     [Linux Admin]     [Linux Net]     [GFS]     [RPM]     [git]     [Yosemite Forum]


  Powered by Linux