Linux RAID Storage
[Prev Page][Next Page]
- Re: Why does the md/raid subsystem does not remap bad sectors in a raid array?, (continued)
- Velociraptor biting the dust (9th disk, continued to use it, and..),
Justin Piszcz
- Ninth(?) Velociraptor replacement or md(RAID)/smartmontools(?) bug?,
Justin Piszcz
- [OT] If RAID's not backup... what do you use?,
John Robinson
- A (novel?) variant of the Raid5 reassembly problem: help requested, Donald J. Barry
- Comments on printing out right raid type?,
Justin Piszcz
- [PATCH] md_print_devices: use le{32,64}_to_cpu to access data correctly,
crquan
- [PATCH] Manage: kernel 2.6.18 can re-add v1 superblocks., Bin Guo
- Backups using RAID1,
Drew
- Re: Backups using RAID1, Robin Hill
[PATCH] md: fix multipath oops,
Andre Noll
Calculate logical RAID-6 position from physical position, Wesley Leggette
[PATCH] md: use list_for_each_entry macro directly,
crquan
raid6's using not the best bandwidth method && raid6 algo is significantly slower in x86_64.,
Igor Podlesny
[PATCH] md: make use of list_for_each_entry_safe, crquan
Re: lilo boot problems from raid1 device(s) ., Mr. James W. Laferriere
2.6.27.6 question: ata_sff_hsm_move: ata15 (why always ata15)?,
Justin Piszcz
Should we be trying re-write on write errors?,
greg
Feature suggestion: immediate repair attempt on failed read?, John Robinson
[PATCH] need another print_sb for mdp_superblock_1, Denis ChengRq
[RFC PATCH 00/11] md: support for asynchronous execution of RAID6 operations,
Ilya Yanok
[PATCH 08/11] md: asynchronous handle_parity_check6, Ilya Yanok
[PATCH 06/11] md: change handle_stripe_fill6 to work in asynchronous way, Ilya Yanok
[PATCH 04/11] md: run stripe operations outside the lock, Ilya Yanok
[PATCH 03/11] async_tx: add support for asynchronous RAID6 recovery operations, Ilya Yanok
[PATCH 01/11] async_tx: don't use src_list argument of async_xor() for dma addresses, Ilya Yanok
[PATCH 02/11] async_tx: add support for asynchronous GF multiplication, Ilya Yanok
[PATCH 05/11] md: common schedule_reconstruction for raid5/6, Ilya Yanok
[PATCH 07/11] md: rewrite handle_stripe_dirtying6 in asynchronous way, Ilya Yanok
[PATCH 09/11] md: change handle_stripe6 to work asynchronously, Ilya Yanok
[PATCH 10/11] md: remove unused functions, Ilya Yanok
Superblock limits / conversion,
Ryan Wagoner
partitionable md partition size caps at 0.4TB,
Jan Wagner
3 Disk Raid 1, Nick Pappin
Re: typo in raid[456] kernel code/no change based on type?,
Justin Piszcz
md.txt, preread_bypass_threshold and raid5: corrected error,
Justin Piszcz
OT: Tips for good hard drives for a home server,
Henry, Andrew
Fedora 9 install using md RAID,
Richard Scobie
How about reversed (or offset) disk components?,
Igor Podlesny
Swapping a disk in a raid5 array,
Mike Myers
[mdadm git pull] random fixes and compatibility updates for imsm,
Dan Williams
RAID-6 question.,
Justin Piszcz
Recovering RAID-5 from images,
Stefan Heinrichsen
zeroing superblocks on running systems,
martin f krafft
Problems with raid6 growing,
Michał Przyłuski
metadata format 00.90 unknown, ignored,
Leandro Tracchia
[PULL REQUEST] 3 bugfixes for md, Neil Brown
Hi! I wonder wouldn't it be efficient to select ALGORITHM_?type?_ASYMMETRIC ...,
Igor Podlesny
Time to ask for help. Raid-5 Dual drive failure,
Brad Campbell
md has hard coded maximum number of drives?,
Gregory Stark
flagging a disk faulty during raid-5 reshape/grow operation,
max power
raid 1 mismatch_cnt, Ryan Wagoner
linear : divide error: 0000,
Wei Yongquan
mdraid10 regression in 2.6.27.4 (possibly earlier),
Peter Rabbitson
Initial degraded RAID6 sync doesn't occur? Kernel reports it as RAID5?,
Bas van Schaik
Linux RAID & XFS Question - Multiple levels of concurrency = faster I/O on md/RAID 5?,
Justin Piszcz
Bug in mdadm 2.6.7, Vladislav Konecny
Adaptec raid congtrollers for SATA disks under software raid,
Mike Myers
[PULL REQUEST] one more fix for md: destroy partitions when stopping an array., Neil Brown
mdadm --grow, Greg Freemyer
diskspotting (how to tell the dead one?),
Dexter Filmore
[Patch mdadm-2.6.7.1 0/3] Misc fixes for mdadm-2.6.7.1,
Doug Ledford
And again help on deciphering an error,
Peter Rabbitson
[mdadm git pull] "--assemble --scan" support for imsm,
Dan Williams
dmraid - where is the raid done?,
Brian J. Murrell
question on how to (correctly) build an initrd for a root disk on a RAID1,
Joe Landman
RFC - device names and mdadm with some reference to udev.,
Neil Brown
multiple raid 5 arrays using multiple partitions, Adeel N
Re: can I replace spin lock of stripe with mutex?, Neil Brown
[PULL REQUEST] supplementary md patches for 2.6.28, Neil Brown
mail notification of raid problems on 2.6.12,
Keld Jørn Simonsen
bad block checking and repair, Keld Jørn Simonsen
backup using raid,
Max Waterman
mdadm degraded RAID5 failure,
Steve Evans
initiate consistency check using mdadm,
Mattias Hellström
HELP! my raid5 ate my data!,
Morgan Wahl
Possible Bug in MD?,
Jon Nelson
change order of component devices, ml
aoe freezes 2.6.26.6,
Ferenc Wagner
Proactive Drive Replacement,
Jon Nelson
[PATCH 0/9] md: Make raid0 use sector-based quantities,
Andre Noll
[PATCH 0/8] md: Make raid0 use sector-based quantities,
Andre Noll
RAID 0 md device still active after pulled drive,
thomas62186218
[PATCH] MD data integrity support,
Martin K. Petersen
RAID 0, disks swapped ?,
c . baegert-listes
[2.6 patch] init/do_mounts_md.c must #include <linux/delay.h>,
Adrian Bunk
PULL REQUEST assorted md fixes etc for 2.6.28,
Neil Brown
[git pull] updates for mdadm-3.0 and imsm support, Dan Williams
OT:backup, Max Waterman
Potential mdadm 2.6.7 bug: Cannot grow linear arrays with superblock v1.0, 1.1, or 1.2,
thomas62186218
Distributed spares,
Bill Davidsen
Confused About Results of Constructing raid10 Array,
Trebor A. Rude
Problems booting from an Adaptec 2010s in 2.6.26, Hibbard T. Smith, JR
Is raid6 reshape (grow) supported?,
Matt 'Murph' Finnicum
Determining filename from absolute sector failure in raid0,
Bryce
RAID issue (Fedora 9 issue?),
Jeffrey Ross
[MD] need another print_sb for mdp_superblock_1, crquan
[PATCH] [VFS] mark bio_split_pool static,
Denis ChengRq
SATA errors?,
Danilo Godec
server crash, mdadm rebuild, Michael Egglestone
raid1 on HDD + RAM ?,
Janek Kozicki
Higher read performance during (!?) resync on raid10, Daniel Zetterman
/sys/block/md0 still present after mdadm -S and -r,
thomas62186218
Faster read performance DURING (?) resync on raid10,
sminded
ANNOUNCE: mdadm 3.0-devel1 - A tool for managing Soft RAID under Linux,
Neil Brown
exception Emask 0x0 SAct 0x1 / SErr 0x0 action 0x2 frozen,
Justin Piszcz
[PATCH] md: Add support for data integrity to MD,
Martin K. Petersen
[PULL REQUEST] softlockup can trigger a false-positive inside md., Neil Brown
Warning Code:USV64MT1, Upgrade Team
Raid6 array crashed-- 4-disk failure...(?),
Maarten
Expandable raid,
Bill Davidsen
mdadm write-behind with --grow, Tim Janik
md: Check for memory allocation failure in faulty personality, Sven Wegener
Addition of a partition to an existing RAID1 array overwrites disk partition table,
Jacobo Cabaleiro
drivers/ata/libata-core.c:4732 ata_qc_issue+0x4c/0x2e0,
Martin Michlmayr
Slow RAID5 build on ata_piix vs. fast on sata_mv,
Richard Michael
Observation about RAID 0 performance in 2.6.25 kernel,
AndrewL733
Re: Observation about RAID 0 performance in 2.6.25 kernel, Peter Grandi
[PATCH] ASYNC_TX: fix the bug in async_tx_run_dependencies,
Ilya Yanok
[PULL REQUEST md] Fixes for two recent regression, Neil Brown
Re: [opensuse] Opensuse doesn't wait long enough for the disks to spin up before trying to configure raid, Mike Myers
RAID1 disk failure causes hung mount,
Philip Molter
Create software RAID from active partition,
Michael Guyver
Re: md (regression): reboot/shutdown hangs,
Neil Brown
2.6.26 (x86 vs. x86_64) different /sys directory structure for md?, Justin Piszcz
Linux tries to bring up raid before the disks are finished initializing,
Mike Myers
I/O wait problem with hardware raid,
Eric S. Johansson
Help to decipher kernel io error log,
Peter Rabbitson
No md superblock immediately after creating RAID 5 /dev/md0,
thomas62186218
2.6.18 very slow sync to disk with ext3 fs on an md raid10 array, Don Dupuis
from raid456 patch, about the tiotest tool,
rae l
Device naming and raid1,
Tony Coffman
RAID not auto-assembling?,
Sean Hildebrand
5 concurrent bonnie runs failing after first pass .,
Mr. James W. Laferriere
Who do we point to?,
greg
Another new users' guide to installing Linux software RAID 10,
Bruce Miller
Problem with assembly after a drive replacement, michael@xxxxxxxxxxx
single RAID slower than aggregate multi-RAID?,
Jan Wagner
[PULL REQUEST] more minor updates for md in 2.6.27, Neil Brown
active(auto-read-only), tiberios
[git pull] async_xor_zero_sum fix, Dan Williams
Nested raid operation and disk sizes,
Mike Myers
[PATCH md] Speed up raid10 resync, especially for 'far' layout,
Keld Jørn Simonsen
[PATCH md] 6 Little md patches for 2.6.27 for review,
NeilBrown
RAID5 to RAID6 migration,
Michał Przyłuski
Q: Is this how 'check' works (on raid10 in particular)?,
Jon Nelson
(root cause found....may be not)64k Page size + ext3 errors,
tirumalareddy marri
[PATCH] md: switch to use pr_debug from <linux/kernel.h>, Denis ChengRq
Re: SLES, not large enough to join array, Neil Brown
[PULL REQUEST] md bug fixes and minor improvements,
Neil Brown
RAID1 write order fidelity,
aristizb
traceback on mdadm --stop, Jon Nelson
Convert v0.9 superblock,
Shane W
Adding a bitmap, v 0.90 superblocks,
Richard Michael
bug in mdadm --grow --size=max, Jon Nelson
AWFUL reshape speed with raid5.,
Jon Nelson
[Index of Archives]
[Linux RAID Wiki]
[Linux Block]
[ATA RAID]
[Kernel]
[Linux SCSI]
[Linux iSCSI]
[Linux SCSI Target Infrastructure]
[Linux Books]