Re: Question on Raid 5 array initial creation times

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Mar 3, 2009 at 8:58 PM, Dylan Distasio <interzone@xxxxxxxxx> wrote:
> I wanted to check to see if anyone could provide a rough estimate of
> how long a RAID 5 initial build should take under mdadm.
>
> I am creating a RAID 5 array with 5x1TB Western Digital Black 7200RPM
> SATA drives on the following system:
>
> Ubuntu 8.10 / ext3 filesystem on array and OS drive
> 1 gig of PC3200 RAM
> AMD Athlon 64 3200+
> Nforce4 motherboard
>
> I am getting a minimum speed of approximately 14000K/sec with an
> estimated finish time of roughly 19 hrs from now.
>
> Is this a reasonable speed for creating a RAID 5 array with mdadm?
>
> Thanks.

I actually did a similar setup recently, and it was very similar
timing.  I'm not sure if it should have been faster/slower, but I can
confirm I saw the same thing.

Dave
--
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux RAID Wiki]     [ATA RAID]     [Linux SCSI Target Infrastructure]     [Linux Block]     [Linux IDE]     [Linux SCSI]     [Linux Hams]     [Device Mapper]     [Device Mapper Cryptographics]     [Kernel]     [Linux Admin]     [Linux Net]     [GFS]     [RPM]     [git]     [Yosemite Forum]


  Powered by Linux