On Thu, Mar 12, 2009 at 06:46:45PM -0500, Ryan Wagoner wrote:
> From what I can tell the issue here lies with mdadm and/or its
> interaction with CentOS 5.2. Let me first go over the configuration of
> both systems.
>
> System 1 - CentOS 5.2 x86_64
> 2x Seagate 7200.9 160GB in RAID 1
> 2x Seagate 7200.10 320GB in RAID 1
> 3x Hitachi Deskstar 7K1000 1TB in RAID 5
> All attached to Supermicro LSI 1068 PCI Express controller
>
> System 2 - CentOS 5.2 x86
> 1x Non Raid System Drive
> 2x Hitachi Deskstart 7K1000 1TB in RAID 1
> Attached to onboard ICH controller
>
> Both systems exhibit the same issues on the RAID 1 drives. That rules
> out the drive brand and controller card. During any IO intensive
> process the IO wait will raise and the system load will climb. I've
> had the IO wait as high as 70% and the load at 13+ while migrating a
> vmdk file with vmware-vdiskmanager. You can easily recreate the issue
> with bonnie++.
I suspect that the answer is 'no', however I am seeing problems with raid 1
on CentOS 5.2 x86_64. The system worked nicely for some 2 months, then apparently
a disk died and it's mirror appeared to have problems before the first could be
replaced. The motherboard & both disks have now been replaced (data saved with a bit
of luck & juggling). I have been assuming hardware, but there seems little else
to change... and you report long I/O waits that I saw and still see
(even when I don't see the kernel error messages below).
Disks have been Seagate & Samsung, but now both ST31000333AS (1TB) as raid 1.
Adaptec AIC7902 Ultra320 SCSI adapter
aic7902: Ultra320 Wide Channel A, SCSI Id=7, PCI-X 101-133Mhz, 512 SCBs
Executing 'w' or 'cat /proc/mdstat' can take several seconds,
failing sdb with mdadm and system performance becomes great again.
I am seeing this sort of thing in /var/log/messages:
Mar 12 09:21:58 BFPS kernel: ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
Mar 12 09:21:58 BFPS kernel: ata2.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 0
Mar 12 09:21:58 BFPS kernel: res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
Mar 12 09:21:58 BFPS kernel: ata2.00: status: { DRDY }
Mar 12 09:22:03 BFPS kernel: ata2: port is slow to respond, please be patient (Status 0xd0)
Mar 12 09:22:08 BFPS kernel: ata2: device not ready (errno=-16), forcing hardreset
Mar 12 09:22:08 BFPS kernel: ata2: hard resetting link
Mar 12 09:22:08 BFPS kernel: ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Mar 12 09:22:39 BFPS kernel: ata2.00: qc timeout (cmd 0xec)
Mar 12 09:22:39 BFPS kernel: ata2.00: failed to IDENTIFY (I/O error, err_mask=0x5)
Mar 12 09:22:39 BFPS kernel: ata2.00: revalidation failed (errno=-5)
Mar 12 09:22:39 BFPS kernel: ata2: failed to recover some devices, retrying in 5 secs
Mar 12 09:22:44 BFPS kernel: ata2: hard resetting link
Mar 12 09:24:02 BFPS kernel: ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Mar 12 09:24:06 BFPS kernel: ata2.00: qc timeout (cmd 0xec)
Mar 12 09:24:06 BFPS kernel: ata2.00: failed to IDENTIFY (I/O error, err_mask=0x5)
Mar 12 09:24:06 BFPS kernel: ata2.00: revalidation failed (errno=-5)
Mar 12 09:24:06 BFPS kernel: ata2: failed to recover some devices, retrying in 5 secs
Mar 12 09:24:06 BFPS kernel: ata2: hard resetting link
Mar 12 09:24:06 BFPS kernel: ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Mar 12 09:24:06 BFPS kernel: ata2.00: qc timeout (cmd 0xec)
Mar 12 09:24:06 BFPS kernel: ata2.00: failed to IDENTIFY (I/O error, err_mask=0x5)
Mar 12 09:24:06 BFPS kernel: ata2.00: revalidation failed (errno=-5)
Mar 12 09:24:06 BFPS kernel: ata2.00: disabled
Mar 12 09:24:06 BFPS kernel: ata2: port is slow to respond, please be patient (Status 0xff)
Mar 12 09:24:06 BFPS kernel: ata2: device not ready (errno=-16), forcing hardreset
Mar 12 09:24:06 BFPS kernel: ata2: hard resetting link
Mar 12 09:24:06 BFPS kernel: ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Mar 12 09:24:06 BFPS kernel: ata2: EH complete
Mar 12 09:24:06 BFPS kernel: sd 1:0:0:0: SCSI error: return code = 0x00040000
Mar 12 09:24:06 BFPS kernel: end_request: I/O error, dev sdb, sector 1953519821
Mar 12 09:24:06 BFPS kernel: raid1: Disk failure on sdb2, disabling device.
Mar 12 09:24:06 BFPS kernel: Operation continuing on 1 devices
Mar 12 09:24:06 BFPS kernel: sd 1:0:0:0: SCSI error: return code = 0x00040000
Mar 12 09:24:06 BFPS kernel: end_request: I/O error, dev sdb, sector 975018957
Mar 12 09:24:06 BFPS kernel: md: md3: sync done.
Mar 12 09:24:06 BFPS kernel: sd 1:0:0:0: SCSI error: return code = 0x00040000
Mar 12 09:24:06 BFPS kernel: end_request: I/O error, dev sdb, sector 975019981
Mar 12 09:24:06 BFPS kernel: sd 1:0:0:0: SCSI error: return code = 0x00040000
Mar 12 09:24:06 BFPS kernel: end_request: I/O error, dev sdb, sector 975021005
Mar 12 09:24:06 BFPS kernel: sd 1:0:0:0: SCSI error: return code = 0x00040000
Mar 12 09:24:06 BFPS kernel: end_request: I/O error, dev sdb, sector 975022029
Mar 12 09:24:06 BFPS kernel: sd 1:0:0:0: SCSI error: return code = 0x00040000
Mar 12 09:24:06 BFPS kernel: end_request: I/O error, dev sdb, sector 975022157
Mar 12 09:24:06 BFPS kernel: RAID1 conf printout:
Mar 12 09:24:06 BFPS kernel: --- wd:1 rd:2
Mar 12 09:24:06 BFPS kernel: disk 0, wo:0, o:1, dev:sda2
Mar 12 09:24:06 BFPS kernel: disk 1, wo:1, o:0, dev:sdb2
Mar 12 09:24:06 BFPS kernel: RAID1 conf printout:
Mar 12 09:24:06 BFPS kernel: --- wd:1 rd:2
Mar 12 09:24:06 BFPS kernel: disk 0, wo:0, o:1, dev:sda2
Mar 12 09:28:07 BFPS smartd[3183]: Device: /dev/sdb, not capable of SMART self-check
Mar 12 09:28:07 BFPS smartd[3183]: Sending warning via mail to root ...
Mar 12 09:28:07 BFPS smartd[3183]: Warning via mail to root: successful
Mar 12 09:28:07 BFPS smartd[3183]: Device: /dev/sdb, failed to read SMART Attribute Data
Mar 12 09:28:07 BFPS smartd[3183]: Sending warning via mail to root ...
Mar 12 09:28:07 BFPS smartd[3183]: Warning via mail to root: successful
--
Alain Williams
Linux/GNU Consultant - Mail systems, Web sites, Networking, Programmer, IT Lecturer.
+44 (0) 787 668 0256 http://www.phcomp.co.uk/
Parliament Hill Computers Ltd. Registration Information: http://www.phcomp.co.uk/contact.php
Past chairman of UKUUG: http://www.ukuug.org/
#include <std_disclaimer.h>
--
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
